Search Results

Search found 31973 results on 1279 pages for 'network library'.

Page 168/1279 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

• Homegroup doesn't show other computers, but "Network" does

  - by McPherrinM

  I have a desktop and a laptop (both running windows 7) in my Windows 7 homegroup. The desktop created the homegroup, and the laptop joined it. Both share a few folders. On the laptop, I have no problem accessing the Desktop's shared folders via the "Homegroup" sidebar button in Windows Explorer. However, on the Desktop, I get the message No other homegroup computers are currently available in the homegroup screen. However, if I go to the Network page, I can see the other computer and browse its shared media. These shares were made by right clicking and choosing "Share with Homegroup". I can access the media, so this isn't a big problem, but I'm just confused as to why the Homegroup screen denies the existence of the other computer. Has anybody else encountered and resolved this?

  Read the article

• windows firewall and network location switch after establishing a vpn connection

  - by Konrads

  I am looking for a reasonable solution for network location switching after VPN connection is established for Windows 7. The scenario is as follows: For location public (employee plugging in his laptop in hotel, public wi-fi,etc) all inbound connections are restricted, only outbound VPN + www is enabled. Employee then initiates a VPN connection, VPN pushes routes to 10.0.0.0/8 subnet Now I would like to have lax security rules for traffic from/to 10.0.0.0/8 that comes through the VPN interface, while still protecting the laptop from traffic that comes via uplink interface as if it was private. How to achieve this switching and duality? One option I see is switching to IPSec...

  Read the article

• Simulating a low-bandwidth, high-latency network connection on Linux

  - by Justin L.

  I'd like to simulate a high-latency, low-bandwidth network connection on my Linux machine. Limiting bandwidth has been discussed before, e.g. here, but I can't find any posts which address limiting both bandwidth and latency. I can get either high latency or low bandwidth using tc. But I haven't been able to combine these into a single connection. In particular, the example rate control script here doesn't work for me: # tc qdisc add dev lo root handle 1:0 netem delay 100ms # tc qdisc add dev lo parent 1:1 handle 10: tbf rate 256kbit buffer 1600 limit 3000 RTNETLINK answers: Operation not supported How can I create a low-bandwidth, high-latency connection, using tc or any other readily-available tool?

  Read the article

• Network vulnerability and port scanning services

  - by DigitalRoss

  I'm setting up a periodic port scan and vulnerability scan for a medium-sized network implementing a customer-facing web application. The hosts run CentOS 5.4. I've used tools like Nmap and OpenVAS, but our firewall rules have special cases for connections originating from our own facilities and servers, so really the scan should be done from the outside. Rather than set up a VPS or EC2 server and configuring it with various tools, it seems like this could just be contracted out to a port and vulnerability scanning service. If they do it professionally they may be more up to date than something I set up and let run for a year... Any recommendations or experience doing this?

  Read the article

• Script to list current user's mapped network drives

  - by Dmart

  I have a Windows XP/ Server 2003 environment here users have mapped different network drives themselves using arbitrary drive letters. Some of these users do not know how to tell the true UNC path of these drives, and I would like to be able to run a script or program to query those drives and show me the drive letters and the corresponding UNC paths. I would like to see output like "net use" in that user's context so that I can see what drives THEY have mapped. I would need to do this using my own admin account, which is where the difficulty lies. I understand this information would be stored in the HKCU registry? I would love to be able to do this in Powershell, but a vbscript or even a standalone executable would do. Thanks.

  Read the article

• No network adapter drivers after Windows re-install

  - by Arno

  This is a pretty basic question. I got a PC (Packard Bell Easynote TK11-BZ-010BE) that had linux on it, so I thought, just delete the partition and its alright. Well, it wasn't. I went into grub recovery and couldn't do anything, so I re-installed windows again. Now the problem is that everything works expect my network adapter. When I go to device manager, I get that there aren't any driver's for it installed. But without internet, I can't install the so called driver finders. How should I solve this?

  Read the article

• remote desktop network failed connection

  - by tbischel

  I was trying to create a remote desktop connection from Windows XP to my Windows Vista Ultimate Addition machine at home. This normally works fine. Today after my connection was dropped, I tried to reconnect to my machine. It brings me to the normal startup screen, but when I tried to log in, it gave me the message "This network connection doesn't exist". This doesn't make much sense, as I have reached a Windows style login screen already. My connection returned later that day, but I'm curious as to what happened. Anyone see this before?

  Read the article

• Running rsync on network connect

  I have one mac which is always on and is my main computer. I also have a MacBook and I'm trying to Sync my iphoto library. So I can successfully use rsync to sync files. I'm using a cron to have it run once a day. In reality the macbook isn't always on, so I'm looking for a way to run rsync when ever the two computers are connected on the same wifi network. So I'm guessing the best place is to somehow run rsync when the airport is connected. Whats the best way

  Read the article

• Running rsync on network connect

  - by user40495

  I have one mac which is always on and is my main computer. I also have a MacBook and I'm trying to Sync my iphoto library. So I can successfully use rsync to sync files. I'm using a cron to have it run once a day. In reality the macbook isn't always on, so I'm looking for a way to run rsync when ever the two computers are connected on the same wifi network. So I'm guessing the best place is to somehow run rsync when the airport is connected. Whats the best way

  Read the article

• Network Path not found while joining Active Directory

  - by Chiggins

  So I have an Amazon EC2 box running Windows Server 2008 with Active Directory installed on it. I also have a Windows 7 virtual machine, which is set to use the Active Directory box as its DNS and WINS server. I'm trying to join the virtual machine to the domain, and I'm asked for authentication. I give authentication, wait a minute, and I get an error saying: The following error occurred attempting to join the domain "ad.chigs.me": The network path was not found. How can I fix this so that I'll be able to join the domain?

  Read the article

• Audio and video streaming using Network Simulator in Linux

  - by Parth_90

  I am working on a project which is to show the simulation of streaming of audio and video data in wireless networks. I want to show the simulation that involves a base station, with few wireless stations. The base station should start sending data once it computes a certain value . On receiving the data, each wireless must begin communicating with the base station. I have gone through basic NS-2 tutorials from over here but I am not getting how to go about integrating it with my project. Can anyone tell me how to do it using NS2 or any other network simulator?

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• SSH access from outside to a pc inside network

  - by Raja

  I have a static IP and ADSL router linked to a linksys wireless router to which all my machines are connected. I would want to setup SVN on one of machines and provide SSH access which should be accessible by users outside my network. Would this be possible? Even just SVN access through web should be fine. Please let me know what all things should be done to achieve this ? I have Ubuntu VM running in a iMac Leopard machine and another 2 Win 7 32/64 bit machines. I can setup standalone Ubuntu or Win XP on another machine. Thanks, Raja.

  Read the article

• DNS Resolution doesn't work after uninstalling Cisco VPN & Deterministic Network Enhancer in Win 7

  - by Craig M

  I just upgraded my home PC to Windows 7 Ultimate 32 bit. After trying various methods to get the Cisco VPN client to work, I gave up and decided to just run it in XP mode. The last steps I tried were in this article ( http://social.technet.microsoft.com/Forums/en-US/w7itproappcompat/thread/d880dfe5-7f44-4955-8620-2a9355d8ea8b/ ) After that, I uninstalled the Cisco client and rebooted. I uninstalled the Deterministic Network Enhancer and rebooted again. Both uninstalled successfully, but now I'm not able to resolve any DNS. The only way I can resolve DNS is to reinstall the DNE, reboot, and uninstall the DNE. Then I am able to resolve DNS lookups until I reboot again. Once it's rebooted, no more DNS. Any ideas?

  Read the article

• Cannot connect to network

  - by dany

  I have a problem: I am on Debian. I configured my nic with a static ip (192.168.1.56). When I try to connect to a network, initially with ifconfig eth2 I get (correctly): eth2 inet addr:192.168.1.56 .... inet6 addr: fe80:221:ff:fe96:4598/64 but after a few seconds the 192.168.1.56 disappears and after some other seconds disappears the inet6 address too. When I press in the nm-applet it requires me the password but in the meantime it try to connect. At uni, the connection is a DHCP one. It works for the first few seconds but after it doesn't. Any possible solution? Here it is the relevant part of the syslog: (static ip configuration) http://pastebin.com/u3BPAsda

  Read the article

• Utilize two gateways on the same network same interface with load balancing

  - by RushPL

  My setup is two ISPs on a single interface and single network. I can either set my default gateway to 192.168.0.1 or 192.168.1.250 and either work. My desire is to utilize both of them with some load balancing. I have tried to follow the advice given in here http://serverfault.com/a/96586 #!/bin/sh ip route show table main | grep -Ev '^default' \ | while read ROUTE ; do ip route add table ISP1 $ROUTE done ip route add default via 192.168.1.250 table ISP1 ip route add default via 192.168.0.1 table ISP2 iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark iptables -t mangle -A PREROUTING -m mark ! --mark 0 -j ACCEPT iptables -t mangle -A PREROUTING -j MARK --set-mark 10 iptables -t mangle -A PREROUTING -m statistic --mode random --probability 0.5 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -j CONNMARK --save-mark Now then I do "traceroute somehost" repeatedly I can only get route through my default route which is 192.168.1.250. Shouldn't the packets change routes in a random manner? How to debug it?

  Read the article

• Command line: Map network drive

  - by Seb Nilsson

  How do I write a command line in a .bat or .cmd that maps a network drive? I want the script to first check if the drive-letter is mapped, and if it is delete it and then map the drive. I only have the mapping-command right now. Please help me fill in the blanks: REM Check if drive exists, if it does, delete it @echo off net use q: /persistent:yes \\localhost\C$\MyFolder pause Are there any of the parameters wrong? Any that should be added?

  Read the article

• Setup IIS 7 as FTP Server that is connectable outside of my local network

  - by Usta

  I was able to setup an FTP site that I was able to access via ftp://127.0.0.1/ or my local(static) ip. To do this I followed these instructions (with the exception that I did not bind to 127.0.0.1 as suggested) http://learn.iis.net/page.aspx/301/creating-a-new-ftp-site-in-iis-7/ I have created a firewall exception for port 20 and 21, and setup port-forwarding on my wireless router. But I can only access the site via local-host, and I need to have a friend have read access to it. So how do I enable remote access to it? (I'd rather not purchase a domain-name) My setup: IIS 7.5 Windows 7 Professional Wireless Network Norton Internet Security 2012 An Internal Static IP Address

  Read the article

• Unexpected network traffic?

  - by robwalker

  My internet connection is via a fixed wireless connection using a 900MHz Motorola Canopy module. The router reports a fairly consistent 32-64Kbps of incoming traffic on the WAN port. When I attached a PC directly to the port and run Wireshark, I get a dump showing a lot of chatter from other machines that I presume are connected to the same tower. This didn't include end-to-end traffic, but was there were a lot of ARP requests, SSDP traffic, ICMP and other network discovery type stuff. Is this 'normal' or does it suggest a misconfiguration somewhere? As far as I can tell there is no need for my modem to be receiving any of this traffic (other than wanting to know what the names of my neighbours machines and printers are!) Since the internet connection is slow at the best of time, having this amount of background noise seems very wasteful.

  Read the article

• NAT rules betweek 2 network interfaces (with iptables)

  - by Simone Falcini

  this is the current network that I have: UBUNTU: eth0: ip: 212.83.10.10 bcast: 212.83.10.10 netmask 255.255.255.255 gateway 62.x.x.x eth1: ip: 192.168.1.1 bcast: 192.168.1.255 netmask: 255.255.255.0 gateway ? CENTOS: eth0: ip: 192.168.1.2 bcast: 192.168.1.255 netmask 255.255.255.0 gateway 192.168.1.1 I basically want this: Make specific NAT rules from the internet to specific internal servers depending on the port: Connections incoming to port 80 must be redirected to 192.168.1.2:80 Connections incoming to port 3306 must be redirected to 192.168.1.3:3306 and so on... I also need one NAT rule to allow the servers in the subnet 192.168.1.x to browse the internet. I need to route the requests on eth0 to eth1 to be able to exit to internet. Can I do this on the UBUNTU machine with iptables? Thanks!

  Read the article

• Chrome developer tools - network panel gaps

  - by Chris Nicholson

  In the Chrome developer tools, under the network tab, I'm curious to know what is happening during the gaps. If you look at my image below, I have highlighted in orange the areas where these gaps exist. Where I'm able to load a lot of my page from cache it's a shame these large gaps occur as they make up most of my page load time. What exactly is happening in this time? EDIT Okay I found this answer which essentially sums up my question, so a different question: does anyone know a good method to reduce the length of these gaps? Presumably (albeit rather extreme) if I loaded all my CSS on the page there wouldn't be a delay after loading the CSS file before the images were loaded.

  Read the article

• Appropriate Network switch for small server cluster

  - by Chris Dutrow

  Need to build a small business server cluster for the purpose of crunching data. It will not host a web site that needs to be available 24/7. It does need to support servers that host Redis, a Cassandra database cluster, and a Python web server. Operating system will most likely be Centos 6.4 Other servers in the cluster should be able to communicate very fast with each other, especially the Redis server. This will probably require the use of internal IP addresses. We will need to use multi-data center replication to synchronize the Cassandra cluster with the one that we currently have hosted on the cloud Was looking into network switches and we are unsure of the appropriate specifications that we should be looking for. Does the switch need to be "managed" or can it be "unmanged"? Does the switch need to support IPv6 or just IPv4? Do we need an enterprise level Cisco switch, or can we go with something like a $200 DLink managed (or unmanaged) small business switch? Thanks so much!

  Read the article

• Network backup for Macs and PCs - formatting question

  - by neilfein

  I'm trying to use a LaCie 2TB drive as an AirPort drive, for backup on a home network. We have one mac and two PC laptops. My plan is to create a Mac partition and a Windows partition. However, Disk Utility won't let me set the windows partition to Windows format; there's no option in the menu for it in the partition tab. Am I doing something wrong? Alternatively, is there a way to partition the drive with one partition that all three machines can see? We have a Mac G5 with 10.4 and two laptops with Windows 7. Thanks!

  Read the article

• Transparently cache files from a network drive in Linux

  - by Vadim

  We have a Linux server that reads files from a network drive and processes them. In a common scenario, a user will log in and access the same files over and over again. The size of the files varies but the larger ones can be around 50+ Mb. The files seldom change. I was wondering if it's somehow possible to transparently cache the files. I don't want (or can) change the program the reads the files, nor do I control the protocol by which the files are accessed. I just want something to detect that I access a certain path, copy the file locally (if needed) and then read the file from the local drive. I've read about Bcache but can't figure out if it's what I need. Do you have any suggestions? Thanks, Vadim.

  Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >