Search Results

Search found 7955 results on 319 pages for 'signal processing'.

Page 168/319 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

• HDMI video output not working for external monitor

  - by user291852

  I have installed from scratch ubuntu GNOME 14.04 with gnome-flashback on my old HP HDX 16 laptop (core 2 duo p8600 + nvidia GT9600M + 4GB of ram) and I have problems with the HDMI output (I use it to extend my desktop on a dell U2412M 1920x1200 monitor). In the following I summarize the configurations that I have tried: Using the open source nouveau drivers, only the laptop monitor works, no signal from the external monitor connected to the HDMI output. However, the output of the xrandr command show that the HDMI output is connected with the correct resolution 1920x1200 (I find this thing really weird). Nouveau drivers with VGA connection works without problems on the external monitor, but the image is blurry compared to the HDMI connection. Using the nvidia drivers (I have tried different versions: nvidia-331-updates and the xorg-edgers versions nvidia-334 and nvidia-337) the HDMI output works, but I have system instabilities, random crashes and display freezes. I can't even enter in terminal mode with ctrl-alt-f1, so I have to manually shut down the laptop with the power button. I really would like to use the HDMI output with the nouveau drivers to avoid the system instabilities that I experienced with the nvidia drivers, but I can't figure out how to make it works. Alessandro

  Read the article

• How will my Electronic Engineering degree be received in the Canadian Game Development market? [closed]

  - by Harikawashi

  I have a Electronic Engineering with Computer Science Degree from a reputable South African university. The EE with CS degree is basically Electronic Engineering, with some of the high voltage subjects thrown out and replaced with computer science subjects - mostly quite theoretical, but not in too much depth. I went on to earn a Masters Degree in Digital Signal Processing, focussing on Speech Recognition in Educational Applications. I have always loved programming - I taught myself QBASIC when I was in primary school, I learned Java at school, did some low level C at University, and taught myself C# and Python while doing my post graduate degree. C# is currently my strong suit, I think I am pretty capable with it. I have two years work experience in Namibia - working as a consulting electrical engineer (no software content whatsoever) and also developing C# desktop applications for the company I work for. I would like to move to Canada next year and work in the Game Development Industry as programmer or software engineer. My interests in particular are towards the more mathematical applications, like game and physics engines, or statistical disciplines like artificial intelligence. However, these are passions - not areas in which I have any work experience. So the question: How well will my BEngEE&CS and MScEng be received in the game industry? Seeing as it's not a pure software degree and I have no official software development work experience?

  Read the article

• ubuntu box just redisplaying login screen after update

  - by David M. Karr

  My Ubuntu 12.04 box has been working fine. A recent update may have messed something up. I normally run remote windows on it, and I noticed that my windows were failing to start up. I then tried logging into it directly from the GUI console, and I'm seeing that after I press enter on the (valid) password, the page just redisplays. It's not a password error, as that would give me an inline error. I see some messages appear and disappear quickly between the login screen going away and then redisplaying, but they go away too quickly to read. I was able to run the non-gui login, and I did an update and upgrade, and then rebooted, but it's doing the same thing. I have a Samba connection from my Windows box, and that's still working. If it matters, here's my uname output (somewhat elided): Linux ... 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux What can I do to troubleshoot this? Note that when I select "Guest Session", it lets me log in and displays the window manager. This seems significant to me. Does this mean that something specific to my login is causing it to fail? Note: If it matters, here's the output from /var/log/dmesg. The line about gdm seems interesting: [ 9.815883] Bluetooth: RFCOMM TTY layer initialized [ 9.815887] Bluetooth: RFCOMM socket layer initialized [ 9.815888] Bluetooth: RFCOMM ver 1.11 [ 9.879088] [PCSPP,TRISTATE] [ 9.879092] parport0: irq 7 detected [ 9.883935] type=1400 audit(1341871177.871:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=845 comm="apparmor_parser" [ 9.884365] type=1400 audit(1341871177.871:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=851 comm="apparmor_parser" [ 9.950397] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 9.961160] init: gdm main process (907) killed by TERM signal [ 9.966358] lp0: using parport0 (polling).

  Read the article

• Why does Ubuntu keep trying to connect to a WiFi network while plugged into an ethernet

  - by labarna

  My desk is situated at the edge of the range of a wireless signal which I use occasionally (when away from my desk) and is therefore saved in network manager. At my desk, however, I plug into the ethernet cable. While I'm working the computer is constantly trying to join the wireless network and usually failing this results in two annoying behaviors. 1: In gnome shell the network connect and disconnect notices keep popping up at the bottom of the screen and I have to click them to make them disappear (I assume it's been fixed in the next version of gnome). 2: (the worst!) Occasionally the wifi password dialog will pop up and ask for the password to this network (which is already saved). An additionally annoyance is that in gnome shell I'll get two copies of the dialog that I have to cancel, one is gnome shell themed (no window border etc...) and the other is just normal gnome themed. (Sometimes if I've been away from the computer for a while I will have multiple copies of this dialog up as its been trying to connect for a while resulting in at times 20 dialogs to cancel). Note, all the while I've been happily connected to the ethernet and have full network access. This is incredibly annoying and distracting, why doesn't ubuntu stop trying to connect to wifi if I'm on the ethernet (unless I want to broadcast my own network, but that's different)?

  Read the article

• Is there any way to kill a zombie process without reboot?

  - by Pedram

  Is there any way to kill a zombie process without reboot?Here is how it happens: I wanted to download a 12GB torrent.After adding the .torrent file, transmission turned into a zombie process.I tried ktorrent too.Same behavior.Finally I could download the file using µTorrent but after closing the program, it turns into a zombie as well. I tried using kill skill and pkill with different options and -9 signal but no success. In some answers in web I found out killing the parent can kill the zombie, but killing wine didn't help either. Is there another way? Edit: ps -o pid,ppid,stat,comm PID PPID STAT COMMAND 7121 2692 Ss bash 7317 7121 R+ ps pstree output: init---GoogleTalkPlugi---4*[{GoogleTalkPlug}] +-NetworkManager---dhclient ¦ +-{NetworkManager} +-acpid +-apache2---5*[apache2] +-atd +-avahi-daemon---avahi-daemon +-bonobo-activati---{bonobo-activat} +-clock-applet +-console-kit-dae---63*[{console-kit-da}] +-cron +-cupsd +-2*[dbus-daemon] +-2*[dbus-launch] +-desktopcouch-se---desktopcouch-se +-explorer.exe +-firefox---run-mozilla.sh---firefox-bin---plugin-containe---8*[{plugin-contain}] ¦ +-14*[{firefox-bin}] +-gconfd-2 +-gdm-binary---gdm-simple-slav---Xorg ¦ ¦ +-gdm-session-wor---gnome-session---bluetooth-apple ¦ ¦ ¦ ¦ +-fusion-icon---compiz---sh---gtk-window-deco ¦ ¦ ¦ ¦ +-gdu-notificatio ¦ ¦ ¦ ¦ +-gnome-panel ¦ ¦ ¦ ¦ +-gnome-power-man ¦ ¦ ¦ ¦ +-gpg-agent ¦ ¦ ¦ ¦ +-nautilus---bash ¦ ¦ ¦ ¦ ¦ +-{nautilus} ¦ ¦ ¦ ¦ +-nm-applet ¦ ¦ ¦ ¦ +-polkit-gnome-au ¦ ¦ ¦ ¦ +-2*[python] ¦ ¦ ¦ ¦ +-qstardict---{qstardict} ¦ ¦ ¦ ¦ +-ssh-agent ¦ ¦ ¦ ¦ +-tracker-applet ¦ ¦ ¦ ¦ +-trackerd ¦ ¦ ¦ ¦ +-wakoopa---wakoopa ¦ ¦ ¦ ¦ ¦ +-3*[{wakoopa}] ¦ ¦ ¦ ¦ +-{gnome-session} ¦ ¦ ¦ +-{gdm-session-wo} ¦ ¦ +-{gdm-simple-sla} ¦ +-{gdm-binary} +-6*[getty] +-gnome-keyring-d---2*[{gnome-keyring-}] +-gnome-screensav +-gnome-settings- +-gnome-system-mo---{gnome-system-m} +-gnome-terminal---bash---ssh ¦ +-bash---pstree ¦ +-gnome-pty-helpe ¦ +-{gnome-terminal} +-gvfs-afc-volume---{gvfs-afc-volum} +-gvfs-fuse-daemo---3*[{gvfs-fuse-daem}] +-gvfs-gdu-volume +-gvfsd +-gvfsd-burn +-gvfsd-http +-gvfsd-metadata +-gvfsd-trash +-hald---hald-runner---hald-addon-acpi ¦ ¦ +-hald-addon-cpuf ¦ ¦ +-hald-addon-inpu ¦ ¦ +-hald-addon-stor ¦ +-{hald} +-hotot---xdg-open ¦ +-3*[{hotot}] +-indicator-apple +-indicator-me-se +-indicator-sessi +-irqbalance +-kded4 +-kdeinit4---kio_http_cache_ ¦ +-klauncher +-kglobalaccel +-knotify4 +-modem-manager +-multiload-apple +-mysqld---10*[{mysqld}] +-named---10*[{named}] +-nmbd +-notification-ar +-notify-osd +-pidgin---{pidgin} +-polkitd +-pulseaudio---gconf-helper ¦ +-2*[{pulseaudio}] +-rsyslogd---2*[{rsyslogd}] +-rtkit-daemon---2*[{rtkit-daemon}] +-services.exe---plugplay.exe---2*[{plugplay.exe}] ¦ +-winedevice.exe---3*[{winedevice.exe}] ¦ +-3*[{services.exe}] +-smbd---smbd +-snmpd +-sshd +-timidity +-trashapplet +-udevd---2*[udevd] +-udisks-daemon---udisks-daemon ¦ +-{udisks-daemon} +-upowerd +-upstart-udev-br +-utorrent.exe---8*[winemenubuilder] ¦ +-{utorrent.exe} +-vnstatd +-winbindd---2*[winbindd] +-2*[winemenubuilder] +-wineserver +-wnck-applet +-wpa_supplicant +-xinetd System monitor and top screenshots which show the zombie process is using resources:

  Read the article

• Modded Portal Gun Levitates a Companion Cube [Video]

  - by Jason Fitzpatrick

  This cleverly designed Portal gun prop levitates a model Companion Cube; the whole setup just begs to be paired with a Halloween costume. Courtesy of Caleb over at Hack A Day: I was out to lunch with a couple friends, brainstorming ideas for fun projects when one of them says “Wouldn’t it be cool if we could build a working gravity gun?”. We all immediately concurred that while it would in fact be cool, it is also a silly proposition. However, only a few seconds later, I realized we could do a display piece that emulated this concept very easily. Floating magnetic globes have been around for quite some time. I determined I would tear the guts out of a stock floating globe and mount it on a portal gun, since they’re easier to find than a gravity gun. I would also build a custom companion cube to be the correct size and weight necessary. Watch the video above and then check out the link below for more information on the build. HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• Segmentation fault while switching QCompleter for QLineEdit [on hold]

  - by san

  I have a QLineEdit that uses autocompletion one which on focusIn event in which it shows paths from XML List(here I have used hardcoded list) but if user doesn't find the path from that list popped by QCompleter than I want user to be able to browse to path typing '/' in QLineEdit , I am not able to select the paths say /Users etc and on trying to type Segmentation fault occurs. from PyQt4.Qt import Qt, QObject,QLineEdit from PyQt4.QtCore import pyqtSlot,SIGNAL,SLOT from PyQt4 import QtGui, QtCore import sys class DirLineEdit(QLineEdit, QtCore.QObject): """docstring for DirLineEdit""" def __init__(self): super(DirLineEdit, self).__init__() self.defaultList = ['~/Development/python/searchMethod', '~/Development/Nuke_python', '~/Development/python/openexr', '~/Development/python/cpp2python'] self.textChanged.connect(self.__dirCompleter) def focusInEvent(self, event): if len(self.text()) == 0: self._pathsList() QtGui.QLineEdit.focusInEvent(self, event) self.completer().complete() def __dirCompleter(self): if len(self.text()) == 0: model = MyListModel(self.defaultList, self) completer = QtGui.QCompleter(model, self) completer.setModel(model) else: dirModel = QtGui.QFileSystemModel() dirModel.setRootPath(QtCore.QDir.currentPath()) dirModel.setFilter(QtCore.QDir.AllDirs | QtCore.QDir.NoDotAndDotDot | QtCore.QDir.Files) dirModel.setNameFilterDisables(0) completer = QtGui.QCompleter(dirModel, self) completer.setCaseSensitivity(QtCore.Qt.CaseInsensitive) completer.setModel(dirModel) self.setCompleter(completer) def _pathsList(self): completerList = QtCore.QStringList() for i in self.defaultList: completerList.append(QtCore.QString(i)) lineEditCompleter = QtGui.QCompleter(completerList) lineEditCompleter.setCompletionMode(QtGui.QCompleter.UnfilteredPopupCompletion) self.setCompleter(lineEditCompleter) class MyListModel(QtCore.QAbstractListModel): def __init__(self, datain, parent=None, *args): """ datain: a list where each item is a row """ QtCore.QAbstractTableModel.__init__(self, parent, *args) self.listdata = datain def rowCount(self, parent=QtCore.QModelIndex()): return len(self.listdata) def data(self, index, role): if index.isValid() and role == QtCore.Qt.DisplayRole: return QtCore.QVariant(self.listdata[index.row()]) else: return QtCore.QVariant() app = QtGui.QApplication(sys.argv) smObj = DirLineEdit() smObj.show() app.exec_() Please help fix this or suggest better way of implementation?

  Read the article

• iOS chat application design, sending/relaying the message over to the end user

  - by AyBayBay

  I have a design question. Let us say you were tasked with building a chat application, specifically for iOS (iOS Chat Application). For simplicity let us say you can only chat with one person at a time (no group chat functionality). How then can you achieve sending a message directly to an end user from phone A to phone B? Obviously there is a web service layer with some API calls. One of the API calls available will be startChat(). After starting a chat, when you send a message, you make another async call, let us call it sendMessage() and pass in a string with your message. Once it goes to the web service layer, the message gets stored in a database. Here is where I am currently stuck. After the message gets sent to the web service layer, how do we then achieve sending/relaying the message over to the end user? Should the web server send out a message to the end user and notify them, or should each client call a receiveMessage() method periodically, and if the server side has some info for them it can then respond with that info? Finally, how can we handle the case in which the user you are trying to send a message to is offline? How can we make sure the end user gets the packet when he moves back to an area with signal?

  Read the article

• Why is wireless slow with Atheros AR9285?

  - by Luke

  I know there are many posts like this, however none of the fixes I have found have worked. I had the issue on 11.04, and after having no luck fixing it decided to try 12.04 however this has not fixed the problem. I'm using a Lenovo IdeaPad, the network card is a Atheros Communications AR9285. edit add outputs: sudo iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"NETGEAR-PLOW" Mode:Managed Frequency:2.437 GHz Access Point: E0:91:F5:7D:1B:BA Bit Rate=65 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:77 Invalid misc:63 Missed beacon:0 eth0 no wireless extensions. lspci -nnk | grep -iA2 net 06:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Lenovo Device [17aa:30a1] Kernel driver in use: ath9k -- 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Subsystem: Lenovo Device [17aa:392e] Kernel driver in use: r8169 Thanks

  Read the article

• How can I get run Ubuntu Desktop on my Galaxy Nexus?

  - by Jack Senechal

  On the Ubuntu for phones site it advertises the desktop view feature: "The phone becomes a full PC and thin client when docked.". And there's the demo by Canonical of something similar running under Ubuntu for Android. I realize they're different systems, but the end effect is in both is to have a full Ubuntu system running on the phone. I've installed Ubuntu Touch Preview on my Galaxy Nexus (toro), and it's working as expected (no cellular signal, but wifi works, etc). But when I plug in a monitor via HDMI it just mirrors the phone's touch display. There's also currently no bluetooth support for attaching keyboard and mouse. Keyboard only kind of works via USB, and mouse not at all. I've also tried running Ubuntu under Android via VNC, but the lack of responsiveness of VNC makes it impractical for daily use. I'd consider that route again if there is some way to make the UI more responsive. So the question is, how can set up my phone to run Ubuntu Desktop in a way that's useable as a laptop replacement? Is there a way to enable Desktop View on Ubuntu Touch? Or can I run Ubuntu for Android as in the previously referenced demo? Plugging into a monitor would be OK, but I'd love to be able to use the desktop interface with mouse and keyboard through the phone's screen as well. Touch input and an onscreen keyboard would be a plus but is definitely not necessary.

  Read the article

• MPlayer does not work

  - by Soham Pal

  Using the xubuntu desktop, on Ubuntu Raring updated from Quantal. MPlayer never really worked. No video, no audio, nothing. I really can't be any more helpful, so here's the log: petey@home-pc:~$ mplayer "/home/petey/Downloads/Polar Bear Cafe (480p)HorribleSubs]/[HorribleSubs] Polar Bear Cafe - 01 [480p].mkv" MPlayer SVN-r35984-4.7 (C) 2000-2013 MPlayer Team Playing /home/petey/Downloads/Polar Bear Cafe (480p)[HorribleSubs]/[HorribleSubs] Polar Bear Cafe - 01 [480p].mkv. libavformat version 55.0.100 (internal) libavformat file format detected. [lavf] stream 0: video (h264), -vid 0 [lavf] stream 1: audio (aac), -aid 0 [lavf] stream 2: subtitle (ass), -sid 0 VIDEO: [H264] 848x480 0bpp 23.810 fps 0.0 kbps ( 0.0 kbyte/s) Clip info: creation_time: 2012-04-05 21:36:10 Load subtitles in /home/petey/Downloads/Polar Bear Cafe (480p)[HorribleSubs]/ Can't open /dev/fb0: Permission denied [fbdev2] Can't open /dev/fb0: Permission denied VO: [v4l2] No such file or directory vo_cvidix: No vidix driver name provided, probing available ones (-v option for details)! [cyberblade] Error occurred during pci scan: Operation not permitted [mach64] Error occurred during pci scan: Operation not permitted [mga] Error occurred during pci scan: Operation not permitted [mga] Error occurred during pci scan: Operation not permitted [nvidia_vid] Error occurred during pci scan: Operation not permitted [pm3] Error occurred during pci scan: Operation not permitted [radeon] Error occurred during pci scan: Operation not permitted [rage128] Error occurred during pci scan: Operation not permitted [s3_vid] Error occurred during pci scan: Operation not permitted [SiS] Error occurred during pci scan: Operation not permitted [unichrome] Error occurred during pci scan: Operation not permitted [VO_SUB_VIDIX] Couldn't find working VIDIX driver. ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 55.0.100 (internal) Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264) ========================================================================== ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 44100 Hz, 2 ch, floatle, 0.0 kbit/0.00% (ratio: 0->352800) Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio)) ========================================================================== [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory DVB card number must be between 1 and 4 AO: [null] 44100Hz 2ch floatle (4 bytes per sample) Starting playback... Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [null] 848x480 = 854x480 Planar YV12 A: 4.7 V: 4.7 A-V: 0.002 ct: 0.083 0/ 0 22% 0% 0.5% 0 0 MPlayer interrupted by signal 2 in module: sleep_timer A: 4.7 V: 4.7 A-V: 0.001 ct: 0.083 0/ 0 21% 0% 0.5% 0 0 Exiting... (Quit)

  Read the article

• How do I install the EW-7318Ug wireless drivers?

  - by user69731

  I'm on Ubuntu 12.04 and I need to install & configure Internet connection. I want to use montor mode in Wireshark. After Ubuntu installation my wireless card was recognized but it doesn't connect to the Internet. Internal wireless card works well. What should I do? I'm new to Linux. PC:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 64:31:50:0f:d4:70 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:45 Base address:0x8000 eth1 Link encap:Ethernet HWaddr e0:2a:82:aa:2d:3e inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::e22a:82ff:feaa:2d3e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20978 errors:0 dropped:0 overruns:0 frame:364651 TX packets:20949 errors:171 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:19299119 (19.2 MB) TX bytes:3024858 (3.0 MB) Interrupt:19 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4788 errors:0 dropped:0 overruns:0 frame:0 TX packets:4788 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:387017 (387.0 KB) TX bytes:387017 (387.0 KB) wlan1 Link encap:Ethernet HWaddr 00:1f:1f:44:c1:a4 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:10508 errors:0 dropped:0 overruns:0 frame:0 TX packets:6143 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14831319 (14.8 MB) TX bytes:644606 (644.6 KB) PC:~$ iwconfig lo no wireless extensions. wlan1 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:225 Noise level:162 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions.

  Read the article

• Update

  - by Jeff Certain

  This blog has been pretty quiet for a year now. There's a few reasons for that. Probably the biggest reason is that I view this as a space where I talk about .NET things. Or software development. While I've been doing the latter for the past year, I haven't been doing the former.Yes, I took a trip to the dark side. I started with Ning 11 months ago, in Palo Alto, CA. I had the chance to work with an incredibly talented group of software engineers... in PHP and Java.That was definitely an eye-opening experience, in terms of technology, process, and culture. It was also a pretty good example of how acquisitions can get interesting. I'll talk more about this, I'm sure.Last week, I started with a company called Dynamic Signal. I'm a "Back End Engineer" now. Also a very talented team of people, and I'm delighted to be working with them. We're a Microsoft shop. After a year away, I'm very happy to be back. Coming back to .NET is an easy transition, and one that has me being fairly productive straight out of the gate.(Some of you may have noticed, my last post was more than a year ago. Yes, it's safe to infer that I didn't get renewed as an MVP. Fair deal; I didn't do nearly as much this year as I have in the past. I'll be starting to speak again shortly, and hope to be re-awarded soon.)At any rate, now that I'm back in the .NET space, you can expect to hear more from me soon!

  Read the article

• How do I get a Belkin F5D8053 wireless adapter working?

  - by disassembler

  I've tried getting my Belkin N Wireless adapter to work on Ubuntu many times with no luck at all. Each time I seem to arrive at a dead end. After some thorough searching of UbuntuForums and WifiDocs I've gathered some information and narrowed the problem down to an issue with the rtl819xU driver. Here's some info that may help: $ sudo lshw -C network *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:22:75:38:52:ac capabilities: ethernet physical wireless configuration: broadcast=yes driver=rtl819xU multicast=yes wireless=802.11b/g/n $ sudo lsmod Module Size Used by vesafb 13449 1 snd_ice1724 106559 2 snd_ice17xx_ak4xxx 13163 1 snd_ice1724 snd_ac97_codec 105614 1 snd_ice1724 ac97_bus 12642 1 snd_ac97_codec snd_ak4xxx_adda 18436 2 snd_ice1724,snd_ice17xx_ak4xxx snd_ak4114 14326 1 snd_ice1724 snd_pt2258 12986 1 snd_ice1724 snd_i2c 13831 2 snd_ice1724,snd_pt2258 snd_ak4113 14307 1 snd_ice1724 snd_pcm 80244 4 snd_ice1724,snd_ac97_codec,snd_ak4114,snd_ak4113 fglrx 2434640 121 snd_seq_midi 13132 0 snd_rawmidi 25269 2 snd_ice1724,snd_seq_midi binfmt_misc 13213 1 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event ppdev 12849 0 snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq dcdbas 14054 0 r8192u_usb 297246 0 snd 55295 16 snd_ice1724,snd_ac97_codec,snd_ak4xxx_adda,snd_ak4114,snd_pt2258,snd_i2c,snd_ak4113,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 12600 1 snd parport_pc 32111 1 snd_page_alloc 14073 1 snd_pcm shpchp 32345 0 lp 13349 0 parport 36746 3 ppdev,parport_pc,lp usbhid 41704 0 hid 77084 1 usbhid e100 40108 0 floppy 60032 0 $ sudo iwconfig wlan0 802.11b/g/n Mode:Managed Access Point: Not-Associated Bit Rate:1 Mb/s Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I'd like to know if 1) Is the driver is properly installed and recognized by Ubuntu? 2) What can I do to load the drivers properly and make use of the adapter? Thanks!

  Read the article

• /lib/i386-linux-gnu/libc.so.6 causing segmentation fault & session crash

  - by Fred Zimmerman

  I am having repeated and frequent crashes ending session whenever I take certain actions such as loading gmail under Chrome. Oddly, the same is not happening when I go to gmail under Chrome. After rooting around in /var/logs it appears to me that he trigger is something to do with libc.so.6 (see below). How can I fix this? 23936.947] [ 23936.947] Backtrace: [ 23936.948] 0: /usr/bin/X (xorg_backtrace+0x49) [0xb7745089] [ 23936.948] 1: /usr/bin/X (0xb75bf000+0x189d7a) [0xb7748d7a] [ 23936.948] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb759c40c] [ 23936.948] 3: /usr/bin/X (0xb75bf000+0xfade7) [0xb76b9de7] [ 23936.948] 4: /usr/bin/X (ValidatePicture+0x1d) [0xb76bcb8d] [ 23936.949] 5: /usr/bin/X (CompositePicture+0xc3) [0xb76bcc83] [ 23936.949] 6: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb6f18000+0xcf542) [0xb6fe7542] [ 23936.949] 7: /usr/bin/X (0xb75bf000+0x10b1d7) [0xb76ca1d7] [ 23936.949] 8: /usr/bin/X (CompositeGlyphs+0xc4) [0xb76b6d84] [ 23936.949] 9: /usr/bin/X (0xb75bf000+0x104956) [0xb76c3956] [ 23936.949] 10: /usr/bin/X (0xb75bf000+0xfe6f1) [0xb76bd6f1] [ 23936.949] 11: /usr/bin/X (0xb75bf000+0x3798d) [0xb75f698d] [ 23936.949] 12: /usr/bin/X (0xb75bf000+0x253ba) [0xb75e43ba] **[ 23936.950] 13: /lib/i386-linux-gnu/libc.so.6 (__libc_start_main+0xf3) [0xb721d4d3] [ 23936.950] 14: /usr/bin/X (0xb75bf000+0x256f9) [0xb75e46f9] [ 23936.950] [ 23936.950] Segmentation fault at address 0x155 [ 23936.950] Caught signal 11 (Segmentation fault). Server aborting [ 23936.950] Please consult the The X.Org Fou**ndation support at http://wiki.x.org for help. [ 23936.950] Please also check the log file at "/var/log/Xorg.0.log" for additional information.

  Read the article

• Upcoming EBS Webcasts for June, July, August 2012

  - by user793553

  See the following upcoming webcasts for June, July and August 2012. Flag Doc ID 740966.1 as a favourite, to keep up to date with latest advisor schedule. Additionally, see Doc ID 740964.1 for access to all archived advisor webcasts Oracle E-Business Suite Oracle E-Business Suite Title Date Summary None at this time.     EBS Agile Title Date Summary None at this time.     EBS Applications Technologies Group (ATG) Title Date Summary EBS – OAM Tuning and Monitoring EMEA July 10, 2012 Abstract EBS – OAM Tuning and Monitoring US July 11, 2012 Abstract Workflow Analyzer Followup EMEA July 24, 2012 Abstract Workflow Analyzer Followup US July 25, 2012 Abstract EBS CRM & Industries Title Date Summary None at this time.     EBS Financials Title Date Summary EBS Fixed Assets: Achieve Success Using Proactive Tools For Fixed Assets Support July 10, 2012 Abstract Overview and Flow of Oracle Project Resource Management July 17, 2012 Abstract Leveraging My Oracle Support To Increase Knowledge July 30, 2012 Abstract EBS HCM (HRMS) Title Date Summary Oracle Time and Labor (OTL) Rollback Functionality Session 1 July 25, 2012 Abstract Oracle Time and Labor (OTL) Rollback Functionality Session 2 July 25, 2012 Abstract EBS Manufacturing Title Date Summary Using Personalization in Oracle eAM June 21, 2012 Abstract OM Guided Resolutions - Finding Known Resolutions Easily July 17, 2012 Abstract Material Move Orders Flow July 25, 2012 Abstract Diagnosing Signal 11 Issues In ASCP Planning August 9, 2012 Abstract Interface Trip Stop - Best Practices and Debugging August 21, 2012 Abstract EBS Procurement Title Date Summary Punchout in iProcurement June 26, 2012 Abstract

  Read the article

• USB device changes using udev and D-Bus

  - by kicsyromy

  I am trying to get a list of currently plugged in USB devices in Ubuntu 10.10 and monitor changes that happen, like devices being plugged in or out using udev and D-Bus. I'm fairly new to programming using D-Bus. I saw one example: "Linux: How to detect is usb keyboard is plugged and unplugged". Problem is that it uses HAL and I know that HAL is deprecated. I found some working code, but it's working only with storage devices such as USB sticks, media players or CD-ROM drives. I want the whole thing: mice, keyboards, USB cameras, chargers; anything that is plugged in to the USB. How can I listen D-Bus events for any USB device plug and unplug? This is basically what I have now (also): import dbus import gobject from dbus.mainloop.glib import DBusGMainLoop def device_added_callback(device): print 'Device %s was added' % (device) def device_changed_callback(device): print 'Device %s was changed' % (device) #must be done before connecting to DBus DBusGMainLoop(set_as_default=True) bus = dbus.SystemBus() proxy = bus.get_object("org.freedesktop.UDisks", "/org/freedesktop/UDisks") iface = dbus.Interface(proxy, "org.freedesktop.UDisks.Device") devices = iface.get_dbus_method('EnumerateDevices')() print '%s' % (devices) #addes two signal listeners iface.connect_to_signal('DeviceAdded', device_added_callback) iface.connect_to_signal('DeviceChanged', device_changed_callback) #start the main loop mainloop = gobject.MainLoop() mainloop.run()

  Read the article

• What data should be cached in a multiplayer server, relative to AI and players?

  - by DevilWithin

  In a virtual place, fully network driven, with an arbitrary number of players and an arbitrary number of enemies, what data should be cached in the server memory, in order to optimize smooth AI simulation? Trying to explain, lets say player A sees player B to E, and enemy A to G. Each of those players, see player A, but not necessarily each other. Same applies to enemies. Think of this question from a topdown perspective please. In many cases, for example, when a player shoots his gun, the server handles the sound as a radial "signal" that every other entity within reach "hear" and react upon. Doing these searches all the time for a whole area, containing possibly a lot of unrelated players and enemies, seems to be an issue, when the budget for each AI agent is so small. Should every entity cache whatever enters and exits from its radius of awareness? Is there a great way to trace the entities close by without flooding the memory with such caches? What about other AI related problems that may arise, after assuming the previous one works well? We're talking about environments with possibly hundreds of enemies, a swarm.

  Read the article

• wireless is disabled by hardware lenovo 3000g430

  - by sudheer

  sir i have problem with my wifi switch sir please tell me solution for my problem (wifi is disabled by hardware). output of sudo lshw -C network is sudo] password for sudheer: *-network DISABLED description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:06:00.0 logical name: eth2 version: 01 serial: 00:21:00:72:3a:93 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:19 memory:f4700000-f4703fff *-network description: Ethernet interface product: NetLink BCM5906M Fast Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 02 serial: 00:1e:68:ad:24:0b size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=sb v3.04 ip=172.16.52.79 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:47 memory:f4600000-f460ffff output of iwconfig is lo no wireless extensions. eth2 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. sudheer@sudheer:~$ sudo iwlistscanning sudo: iwlistscanning: command not found ***sudheer@sudheer:~$ sudo iwlist scanning*** lo Interface doesn't support scanning. eth2 Failed to read scan data : Invalid argument eth0 Interface doesn't support scanning.

  Read the article

• Raspberry Pi Now Shipping with 512MB RAM; Still Only $35

  - by Jason Fitzpatrick

  Fans of the tiny Raspberry Pi will be pleased to hear the new version of their Model B board now ships with 512MB of RAM (up from the previous 256MB). The best part about the upgrade? The price point stays at $35 a board. From the official Raspberry Pi blog: One of the most common suggestions we’ve heard since launch is that we should produce a more expensive “Model C” version of Raspberry Pi with extra RAM. This would be useful for people who want to use the Pi as a general-purpose computer, with multiple large applications running concurrently, and would enable some interesting embedded use cases (particularly using Java) which are slightly too heavyweight to fit comfortably in 256MB. The downside of this suggestion for us is that we’re very attached to $35 as our highest price point. With this in mind, we’re pleased to announce that from today all Model B Raspberry Pis will ship with 512MB of RAM as standard. If you have an outstanding order with either distributor, you will receive the upgraded device in place of the 256MB version you ordered. Units should start arriving in customers’ hands today, and we will be making a firmware upgrade available in the next couple of days to enable access to the additional memory. We’re excited to get our hands on a new board and try out Raspbmc with that extra RAM. HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• Can Dungeons & Dragons Make You More Successful? [Video]

  - by Jason Fitzpatrick

  Dungeons & Dragons gets a bit of a bad rap in popular culture, but in this video treatise from Idea Channel, they propose that Dungeons & Dragons wires players for success. There are some deeply ingrained stereotypes about Dungeons & Dragons, and those stereotypes usually begin and end with people shouting “NERD!!!” But the reality of the D&D universe is a whole lot more complex. Rather than being an escape from reality, D&D is actually a way to enhance some important real life skillz! It’s a chance to learn problem solving, visualization, interaction, organization, people management… the list could go on and on. Plus, there are some very famous non-nerds who have declared an affinity for D&D, so best stop criticizing and join in if you want to be a successful at the game of life. While we’re trying not to let our love of all things gaming cloud our judgement, we’re finding it difficult to disagree with the premise that open-ended play fosters creative and adaptive thinking. Can Dungeons & Dragons Make You A Confident & Successful Person? [via Boing Boing] HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• There's IP but can't reach gateway

  - by icky

  I have just installed ubuntu 12.04 on my new laptop, and brought it back to home, but I found the wireless network does not work. Strangely, it has the correct ip, but can't connect to the gateway. ifconfig gives ip 192.168.64.36, with broadcast 192.168.79.255 and mask 255.255.240.0, this are all correct, the gateway is at 192.168.64.1 cat /etc/resolv.conf nameserver 192.168.64.1 nameserver 127.0.0.1 which i think it's also right. but when I ping 192.168.64.1, all packages are lost. Please help me with this, I really do not know what happened to my network settings. Huckle, Thank you for your reply ifconfig wlan0 Link encap:Ethernet Hwaddr 88:f9:af:2a:ca:1b inet addr:192.168.64.36 Bcast:192.168.79.255 Mask:255.255.240.0 inet6 addr: fe80::8a9f:faff:fea2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:376 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3950 TX byetes:60288 iwconfig wlan0 IEEE 802.11bgn ESSID:"Chiono" Mode:Managed Frequency:2.417 GHz Access Point: 82:54:99:94:6D:43 Bit Rate=13.5 Mb/s Tx-Power=13 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=70/70 Signal Level=-32 dBm Rx invalid nwid:0 Rx invalid crypt:0 RX invalid frag:0 Tx excessive retries: 9 Invalid misc:10 Missed beacon:0 route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.64.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.64.0 * 255.255.240.0 U 2 0 0 0 wlan0 Thank you very much

  Read the article

• Pandaboard crash on startup or freeze after minutes

  - by Meach

  I just received my Pandaboard ES (rev B) and I am having trouble after installing ubuntu-omap4-addons. Once I copied the image ubuntu-12.04-preinstalled-desktop-armhf+omap4.img on my sd card and boot the pandaboard with it, I run the following commands: sudo add-apt-repository ppa:tiomap-dev/release sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install ubuntu-omap4-extras At the end of the installation of ubuntu-omap4-extras, Ubuntu tells me that a problem occurs when the console displays: ldconfig deferred processing now taking place Clicking on "report the problem" tell me that the problem concerns pvr-omap4-dkms. I read somewhere that this can happen and it is better to reinstall pvr-omap4-dkms. Which I am doing by running: sudo apt-get install --reinstall pvr-omap4-dkms I reboot. Then the board has sometimes difficulties to start Ubuntu: it freezes during the loading page, only action I can do is unplugging the board to start it again. Some other times, Ubuntu load successfully but then freeze at another random time, in the range 20 - 40 minutes. I searched on internet for similar bug and found this: https://bugs.launchpad.net/ubuntu/+source/linux-ti-omap4/+bug/971091 So I typed this in: update-rc.d ondemand disable apt-get -y install cpufrequtils echo 'ENABLE="true" GOVERNOR="performance" MAX_SPEED="0" MIN_SPEED="0"' > /etc/default/cpufrequtils cpufreq-set -r -g performance reboot But it doesn't seems to fix the bug. Another detail: on startup, before the loading screen of Ubuntu (when there is the two penguins displayed :)), it shows this: [0.297271] CPU1: Unknown IPI message 0x1 [0.308990] omap_hwmod: mcpdm: _wait_target_ready error: -16 [0.354705] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [0.354766] omap_hwmod_mux_init: Could not allocate device mux entry [2.107086] thermal_get_slope:Getting slope is not supported for domain gpu [2.107116] thermal_get_offset:Getting offset is not supported for domain gpu [2.107299] stm_fw: vendor driver stm_ti1.0 registered [8.725555] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! debug=0 Any idea what can be wrong? I am not that good with Ubuntu so any help will be appreciated. Cheers! Meach

  Read the article

• My internet connection slows or dies unexpectedly

  - by genesis

  I installed Ubuntu 10.04 once again and I'm having some problems which I had before, but I have no idea how I solved them. On Windows, everything's working fine and I had no problems with this. My problem is that sometimes, when browsing through the internet, webpages just start to load really slow, sometimes it doesn't load anything at all (Error 118 (net::ERR_CONNECTION_TIMED_OUT): The operation timed out.) and it starts to work after few minutes. My IPv4 settings are automatic (DHCP), and IPv6 settings are Ignored/Disabled. I think my previous problems had something to do with IPv6, but I'm not sure. Is there a fix for this? iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Fsite1" Mode:Managed Frequency:2.442 GHz Access Point: C8:3A:35:40:43:68 Bit Rate=0 kb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=43/70 Signal level=-67 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0

  Read the article

• The Most Ridiculous Computer Cameos of All Time

  - by Jason Fitzpatrick

  For the last half century computers have played all sorts of major and minor roles in movies; check out this collection to see some of the more quirky and out-of-place appearances. Wired magazine rounds up some of the more oddball appearances of computers in film. Like, for example, the scene shown above from Soylent Green: Spoiler alert: Soylent Green is people! But that’s not the only thing we’re gonna spoil. Soylent Green is set in 2022, and at one point, you’ll notice that a government facility is still using a remote calculator that plugs into the CDC 6600, a machine that was state-of-the-art in 1971. Come to think of it, we should scratch this from the list. This is pretty close to completely accurate. Hit up the link below to check out the full gallery, including a really interesting bit about how the U.S. Government’s largest computer project–once decommissioned and sold as surplus–ended up on the sets of dozens of movies and television shows. The Most Wonderfully Ridiculous Movie Computers of All Time [Wired] Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference

  Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >