Search Results

Search found 25098 results on 1004 pages for 'usb network adapter'.

Page 168/1004 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

• Disable (or switch off) a network interface on windows but keep the "plug and play"

  - by Leandro

  I'm looking for a good workaround to do this on Windows 7 and Windows XP: Disable or make ineffective the network interface (ETH, WIFI, any NIC). If the user connect his ETH cable, the network interface enable again. Important Notes to take care: I'm working with wmic on Win7 (through the command line) I'm working with devcon on WinXP (through the command line) I'm specifically working with the .NET Framework 2.0 on C# but this is just for informational purposes. I know that an event won't help me to detect it (if there is a way or workaround to do this I don't know it). The real problem is that when I disable the NIC, I can't know if the user connects his cable or has a wired network. This is why I am looking for a workaround. I'll treat suggestions as answers if no direct answer exists. I'll provide any extra detail necessary.

  Read the article

• Ubuntu 10.10 strange USB file Permissions

  - by Christian Hubinger

  Hi, I'm developing a cross-plattform application that is delivered an run dirctly form an USB stick. As FAT32 ist the only FS working well for this (rw on windos/linux/mac) we use it as the FS for the stick. My Problem is that from Ubuntu 10.4 - 10.10 something changed at mounting the stick is mounted with files: rw-rw-r directories: rwxrwxr-x and (that is really strange) the Win32 Version of the application app.exe: rwxrwxr-x I tried for quit a while to find out where this is configured but could not find it - simple udev rule with MODE="0777" simpyl gets ignored. Any kind of idea help is very, very welcome, as not being able to find a solution for this is a real show stopper. thanks in advance and kind regards, Chris

  Read the article

• How can you make a Windows USB HDD Modify All for All Users

  - by David Allan Finch

  Hi, I use a USB HDD a lot between lots of different Windows Boxes. What I find after a while is that there get to be lots of different Permission on the files in some cases stopping me looking at files or removing them. They want Admin rights or even sometimes you need to put the disk back into the original machine with the original user. This is a right pain. Is there away of making the disk have Modify All for All Users and making this the default for all files on the disk. Thanks

  Read the article

• Routing traffic to another internal network

  - by Jason

  OK, so here is the scenario. I have 4 Locations connected with an MPLS. I have installed an ASA at the primary location which is 10.20.1.0. Traffic is fine internally and to the world, however... I can't route traffic over the MPLS to another network. It is being blocked by an implicit deny rule even though there is a rule to allow any to any less secure interface (it should be using the same interface in/out, right?). I have a static route for the network in and the ASA can ping it - Just not traffic on the internal network of the ASA. -Jason

  Read the article

• Local network cache of PHP and Apache2 on Win Server 2008 R2

  - by Ahmed Benlahsen

  Software configuration : I have a new server with Windows Server 2008 R2 installed via VMWare. I have installed Apache2.2, PHP5.2 and MySQL5.5 as separate packages. Issue : On my first installation of my application, all works great. When I updated some JS and CSS files and accessed my application again from a PC on local network, I got the old JS and CSS versions. When I access the same application on local server I got the latest versions of those files. Link of my application on local server is : http://localhost/BADIL Link of my application from local network is : http://LOCAL_SERVER_IP/BADIL I think that must be some cache but I don't know where. Maybe on Win Server 2008 R2 or on VMWare? The question is: Why, when I access my application on the server, everything works fine, but when I access the same application from a local network, I do not see the updated versions of JS and CSS files?

  Read the article

• Mac Parallels - Bridged network

  - by Jack

  Hey All, I am new to Apple and my task is to install VMs on a Mac server. I am trying to install 4 VMs and I want them to have separate IPs and be visible on the network as separate machines. What are my options ? My research shows me that I can use bridged network, but I have to select an adapter. I have only two network adapters, does that mean I can only have 2 VMs ? And when I configure the 2 VMS, will my actual server have internet connection ? Or does it use the Mac address ?

  Read the article

• Slower wireless speed in Ubuntu 12.04 (64-bit) on Asus USB-N13

  - by PhantonTurtle

  I have an Asus USB-N13 which I use for wireless internet on my desktop. The download speed I get on Windows 7 (dual-boot) is 15.22 Mbps. On Ubuntu 12.04 (64-bit) I can only get 1.09 Mbps. I asked a question about this on the Ubuntu forums as well, but I did not get an answer. Here is the output from lsmod | grep rt which gives me, parport_pc 32866 0 rtl8192cu 103297 0 rtl8192c_common 75767 1 rtl8192cu rtlwifi 111202 1 rtl8192cu mac80211 506816 3 rtl8192cu,rtl8192c_common,rtlwifi cfg80211 205544 2 rtlwifi,mac80211 parport 46562 3 parport_pc,ppdev,lp I installed the drivers from Realtek (my chipset is Realtek, not Ralink) but that did not work.

  Read the article

• USB key to pass password in Centos 6

  - by Andrew

  I had a room mate that put a livecd in my desktop and looked around on my machine. I caught him in the act and threw him out. I haven't had a room mate for a while now and so as to avoid the livecd issue again I encrypted the hard drive, the machine is running centos 6.3. Is there anyway that I can avoid typing the password in each time if I have usb key in the machine to feed the password to the system? Additional question. Is there anything you can suggest to solve the problem I have ? Thanks

  Read the article

• Routing traffic to another internal network

  - by Jason

  OK, so here is the scenario. I have 4 Locations connected with an MPLS. I have installed an ASA at the primary location which is 10.20.1.0. Traffic is fine internally and to the world, however... I can't route traffic over the MPLS to another network. It is being blocked by an implicit deny rule even though there is a rule to allow any to any less secure interface (it should be using the same interface in/out, right?). I have a static route for the network in and the ASA can ping it - Just not traffic on the internal network of the ASA. -Jason

  Read the article

• "Failed to delete the item from the trash" on network drive files

  - by bstpierre

  How does the Ubuntu trash work? It appears that one trash bin is used by many drives. I've noticed a folder called ".Trash-1000" on my network drive as well as "/home/user/.local/share/Trash". Currently I have a problem where a number of files I deleted from a network drive (which I no longer have full access to) appear in my trash but but cannot be deleted, I see the error "Failed to delete the item from the trash". If I look at the files in this network drive trash I notice that it contains all of these undeletable files. I am running Ubuntu 9.10 x64.

  Read the article

• Running .net application over a network

  - by Marlon

  Hello, I need some advice please. I need to enable a .Net application to run over a network share, the problem is that this will be on clients network shares and so the path will not be identical. I've had a quick look at ClickOnce and the publish options in VS2008 but it wants a specific network share location - and I'm assuming this location gets stored somewhere when it does its thing. At the moment the job is being done with a old VB6 application and so gets around all these security issues, but that application is poorly written and almost impossible to maintain so it really needs to go. Is it possible for the domain controller to be set up to allow this specific .Net application to execute? Any other options would be welcomed as I want to get this little application is very business critical. I aught to say that the client networks are schools, and thus are often quite locked down as are the client machines, so manually adding exceptions to each client machine is a big no no. Marlon

  Read the article

• Copy Network Volume configuration among Linux systems

  - by David Yu

  I have several standalone Debian Linux (Lenny) systems. As it stands now, all of the systems are configured with a generic login account. This login account has a network volume that connects to a Windows share on a Windows server. I need to create a batch of user accounts on all of the systems (this part I figured out). After I create all of the user accounts, I need all of them to have the same network volume mapping as the current generic account. Is the network volume configuration saved somewhere, where I could copy that configuration across all of the user accounts?

  Read the article

• Vista: "connect to a network" does not load (can't set up VPN)

  - by Arkaaito

  I'm trying to connect to my office VPN from home. One small problem: my home desktop uses Vista (64-bit, Ultimate edition). On Vista, you're supposed to set up a VPN like so: Open the control panel Click on Network Click on "Connect to a Network" Configure a new connection of type "Office" The problem is, when I click on the link for "Connect to a Network", nothing happens. Can anyone suggest how I should go about troubleshooting this? (Or am I better off just upgrading to Windows 7?)

  Read the article

• How can I configure a Linksys EA4500 + usb printer for network printing (without connect cloud)

  - by Larry Kyrala

  The documentation and classic firmware (2.0.37) for Cisco's Linksys EA4500 is a bit sparse on setup details. It says I can connect a USB-printer, but then goes on to try to sell "Connect Cloud" remote management software. I don't want that. I just want to know how to set this up with the existing advanced firmware. Is it possible? AFAIK, to setup a IPP or LDP printer, there is usually some kind of queue configuration on the server (i.e. the ea4500 in this case), but I can't find it in the firmware. I also have been unable to find any existing protocols from win7 or mac osx. (windows network share, IPP/LDP etc.) I'm curious if I need to have the "Storage" accounts active and connect to my router either via the local IP or router name. There's a lot of unknowns here; it would help to know how this particular router actually works.

  Read the article

• How to automount SMB shared network drives in Mac OS X Lion

  - by cyppher

  In Mac OS X 10.7 (Lion) Apple has replaced good old SMB support. Now I can't auto connect to my shared (SMB) network drives. Workarounds? Or Impossible? In OS X Snow Leopard, I could automatically connect my Ubuntu (SMB) shared network drives with auto_smb / auto_master (autofs configuration in /private/etc/). I made three mount points (folders) directly in '/Volumes', I used /Volumes/Data and /Volumes/webroot (both SMB shared). Unfortunately Lion doesn't connect (automount) my network drives. I have to manually connect to the server (Ubuntu file server) in Finder, then open up Terminal to navigate to the mount points, and then it connects. This is not a workable solution. I've searched (Google/SO) but found no solutions apart from an unsupported hack. Isn't it possible any more to automatically connect to an SMB-shared drive during startup?

  Read the article

• Oracle 11g network configuration

  - by Kylo

  I installed Oracle 11g Enterprise Edition on my Windows 7 Pro. My problem is that I cannot log into database from other host (local network). When I connect to database using Oracle SQLdeveloper everything is ok as long as I specify 'localhost' in connection configuration. However, when I change it to '192.168.0.190' which is my host IP address I get 'The Network Adapter could not establish the connection'. I get the same error when logging in from other host in local network. What is the problem?

  Read the article

• How can I view my IIS hosted sites on other machines on my network

  - by Truegilly

  Hello, at home i have a simple network setup conatining 2 machines and 1 belkin router. On one machine i have a site hosted with IIS7. Rather than the standard localhost/index.htm address i have added an entry in the HOSTS file pointing the local ip (127.0.0.1) to this domain - www.mysite.dev. i can access the site with www.mysite.dev with no problem. what i would like to do is be able to view this site from my other machine on the network. initially i assumed this could be done with a url like so MACHINE-NAME/www.mysite.dev, but the connection always times out. But I can ping MACHINE-NAME without problems. For testing purposes i have diabled the windows firewall on both machines but to no joy. Like a typical web developer, my techy/network skills are pretty poor. Can anyone see where im going wrong ?? thank you for your time Truegilly :)

  Read the article

• Macbook cannot see specific wireless network after being connected to it for a while

  - by donut

  Okay, so there's a single wireless network that my laptop has troubles with. My Macbook Pro used to be fine with it until it changed to using channel 13 (or 11?). Since then, after being connected to it for a while it disappears from my laptop's view. Other networks are showing up fine and other computers (including several Macs) have no troubles connecting to this network. If I clear my system cache using Onyx and then restart (sometimes a couple times) my laptop can see and connect to it again. But it seems that if I disconnect and try reconnecting I have to clear my cache again. One thing to note is that if I put my computer to sleep while connected to this network it has no problems reconnecting on wake up. I've got a 15" Macbook Pro 2,2 with Leopard 10.5.8.

  Read the article

• Analyze a wireless network that constantly drops/has speed issues

  - by Eddie Parker

  Hello, I'm curious what the best tools are to use for analyzing problems with a WiFi network. Here's the scenario: I have a WiFi router (Belkin N+) that's setup in AP mode. I have three RT-N13U's that I've purchased to use as 'repeaters', but I've had so many problems when more than one of them is running (bad routes) that I've only got one active. Sometimes certain boxes on my network can't talk to others, and drops are quite frequent and quite aggravating. I'm running Mac, Windows, and Linux (Gentoo) boxes on this network, so any software, or steps I should take that work for any of those boxes should be sufficient. Apologies if this is answered somewhere else - I'll close it as a dupe if so.

  Read the article

• E71 update my music files keep getting disconnected via USB

  - by keisimone

  Previously, i can update my music files using Oviplayer to my E71 Nokia. Now whenever i plug in my E71 i choose PC suite. i go to Oviplayer in my laptop. and i select the mobile phone section and i press the connect button, automatically my phone is disconnected via USB. the alternative is to choose media transfer or media player. The same thing happens. And the connecting screen at Ovi player is like hanged. I have previously transferred songs, but only twice. first time this has happened to me. I do not know why. Please aDVISE.Thank you.

  Read the article

• Mac claims to have connected to wireless network, but hasn't

  - by Mick

  I am attempting to connect a new mac OSX 10.6.5 laptop to a wireless network (I am a windows expert but a mac novice). It used to connect without problem to the network when I had the security set to "64 bit wep". Now I have changed the security on my belkin router to "WPA-PSK (no server)". I have two PC's and an old mac connecting via the new security setting without problem. Now I have the problem that on the new mac, the wireless icon is indicating a good connection (5 dark bars). Also the network name has a tick next to it on the wireless drop down menu. But I can not view any websites. I can not even connect to the router by typing 192.168.2.1 into a browser address bar. Any ideas where I went wrong?

  Read the article

• How to execute everything in the Local Area Network

  - by matnagel

  We have a very small LAN here, but some peolpe here think we need Active Directory, though nobody knows how to maintain it. I am not in the position to change this. How can I get full access (on Linux it would be "execute" rights) also for files on network drives (the files are just on another machine next room) My account is in the group Administrators on a windows 2003 server Domain Controller. I cannot open simple MS Access 2000 Databases or CHM Files from network drives in the lan How to do that? Some policy setting? I want to change that once. It is useless. We have no distinction between local or network files here. I would have to copy everything to a local drive and then do what I want.

  Read the article

• permanent NAS-mount in Ubuntu - wrong fs type, bad option, bad superblock

  - by Emil

  My network drive shows up in the file browser, just like my external usb-harddrive. Moving, running and editing files works. Hovering over it shows smb://lacie-2big/nasdisk . BUT, when I want to save a file, the drive doesn't come up as an option. All I can see is my other places, including my usb-harddrive. I am a complete newbie but I am GUESSING that it has something to do with the mount not being a "real" mount but just a shortcut to the smb location. So I ran the tutorial at https://wiki.ubuntu.com/MountWindowsSharesPermanently about how to "mount a network drive permanently". edited my fstab to //LaCie-2big/nasdisk /media/nasmount cifs guest,uid=1000,iocharset=utf8,codepage=unicode,unicode 0 0 and running sudo mount -a gave me the following error: mount: wrong fs type, bad option, bad superblock on //LaCie-2big/nasdisk, missing codepage or helper program, or other error (for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount. helper program) In some cases useful info is found in syslog - try dmesg | tail or so Now thats a very helpful error message, BUT, before I go any further, I'd be really thankful if one of you could tell me if I'm even in the right ballpark, or if my actual need: to be able to download files (ie torrents) directly to the drive, can be possible as it is already. Question: How to fix "wrong fs type, bad option, bad superblock on //LaCie-2big/nasdisk, missing codepage or helper program" when running mount -a

  Read the article

• Video from vhs via USB capture device on Linux

  - by Juanlu001

  I want to transfer video from a VHS tape to my computer with Arch Linux, using a USB capture device that comes with Roxio Easy VHS to DVD, which I recently bought. I tried to plug in the device, and it was properly recognized. From /var/log/messages.log, em28xx #0: Identified as Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 (card=9) saa7115 3-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) em28xx #0: Config register raw data: 0x50 em28xx #0: AC97 vendor ID = 0xffffffff em28xx #0: AC97 features = 0x6a90 em28xx #0: Empia 202 AC97 audio processor detected em28xx #0: v4l2 driver version 0.1.2 em28xx #0: V4L2 video device registered as video1 em28xx #0: V4L2 VBI device registered as vbi0 Is there any software that enables me to capture video coming from this device? I don't mind if it is console or GUI based.

  Read the article

• IBM X3200 M2 upgrade and VT-x / usb passthrough for esxi

  - by enzo

  Hi, I have an IBM server x3200 m2 4368-k1g. Only to understand, simply because on IBM support does not exist no more upgrades kit on sale... if I buy a xeon processor, for example x3330 (4core @ 2.6ghz), and put it on my motherboard... 1) it works? 2) on the bios (where now there is no trace about...) will compare a VT-x menu to select and enable? 3) with esxi, once the VT-x is on... I'll be able to have usb passthrough ? Thank you in advance for your reply

  Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >