Search Results

Search found 25098 results on 1004 pages for 'usb network adapter'.

Page 167/1004 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

  • Dell Dimension 8400 Startup error

    - by Michael
    Hello all, thanks first for taking the time to read this and possibly help me...... now I am pretty decent of a computer tech...but not enough. I am having an issue with my computer which is running windows xp and as I mentioned it is a dell Dimension 8400. as soon as I power the system up the fan goes into hyper drive (spins like crazy and is very loud) then the start up screen with dell comes up and the loading bar gets stuck on the process of "Bios Revision A00" and never loads beyound that. I have read alot about it and think that the main problem was that it can not locate the file (which does have an updated version) I think it is A09. I can not enter safe mode, Bios mode or anything. I do have the file on my other computer and I was wondering if there is a way that I can use a usb flash drive (as I have read on other sites) to create a bootable MS-Dos diskette but I am failing at creating as such....is this possible? or is there anything else I can do? I tried to remove the battery from the system for about 10 minutes while it was completely unplug and tried then to reboot it and go into the bios menu but the same thing keeps happening....can anyone help me :-(

    Read the article

  • No power save on external hard drive - How to implement?

    - by blastawaythewall
    I recently bought a new 3.5" USB external hard drive which I thought had a power save feature on it, but it turns out that it doesn't. So whether it's being used or not, it spins, which wouldn't be a problem if it wasn't so loud and didn't get really really hot. After doing some research, it seems like what controls this is the enclosure of the hard drive and not the drive itself or the OS (although I suspect that's not entirely true). I attempted to use the "hdparm" utility but it couldn't identify my externals. Just to be clear, I'm defining power save as a hard drive spinning down after a certain time period of not being used (read from/written to). Also, I have other externals that do this, so it's not a problem from my computer. Here's my question: Is there a way to implement a power save-like feature on my hard drive through software, OS settings, or anything else? Here's some details: Running: Windows XP Home SP2 HD Model: Cavalry CAUM-B-OTB 2TB (although the website only lists 1TB max) Inside: Hitachi Deskstar 7K2000 (HDS722020ALA330) (I would link, but new users can only post 1) Thanks in advance.

    Read the article

  • Windows 7 Not Recognizing Camera Nor iPhone as Camera

    - by taudep
    I've been struggling with this one for a few days. I've recently upgraded an older computer to Windows 7 Home Premium. Neither my digital camera (A Canon SD1200IS) nor iPhone are ever detected as cameras, nor ever show up as accessable in Explorer. With the Canon camera, no driver is required. It's supposed to work with the default Windows 7 drivers. However, in the Control Panel's Device Manager, I'm always seeing a yellow icon next to the "Canon Digital Camera" device. I've uninstalled the device and let Windows attempt to reinstall, but it can never find a driver to install. With the iPhone, it's very similar. One big difference, though, is that iTunes can see the iPhone and back it up, etc. However, again when I go to the Device Manager, there's a yellow icon next to the iPhone. I've uninstalled iTunes, reinstalled, rebooted, deleted drivers, and let Window try to reinstall the driver, but it can never find the driver. So there seems to be some correlation that my machine can't detect cameras properly, and that it might be even a lower-level type of driver I'm struggling with. I know that USB however, does work, because I have have an external drive hooked into the machine. I've gone through the web and tried two hours worth of fixes, without success. I feel like if I can get the Canon camera detected, then the iPhone will be on it's way to being fixed too. BTW, I couldn't really find anything of use in the Event viewer. Any and all suggestions welcome.

    Read the article

  • Cisco Prime NCS not starting

    - by Kwazii
    I have received the Cisco Prime OVA file and which we placed onto an Oracle virtual environment. We turn the VM on and the CLI boots, When we try to start the NCS service we get errors. HOSTNAME/USER# ncs start Starting Network Control System... Exception in thread "main" java.lang.NullPointerException at com.cisco.wnbu.udi.impl.UDIManager.isPhysicalAppliance(UDIManager.java:184) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:335) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) Logs HOSTNAME/USER# show logging 07/18/13 10:25:38.878 INFO [system] [main] Setting management interface address to 192.168.0.10 07/18/13 10:25:38.884 INFO [system] [main] Setting peer server interface address to 192.168.0.10 07/18/13 10:25:38.884 INFO [system] [main] Setting client interface address to 192.168.0.10 07/18/13 10:25:38.884 INFO [system] [main] Setting local host name to HOSTNAME 07/18/13 10:25:40.341 ERROR [system] [main] THROW java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:419) at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:536) at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228) at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32) at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521) at java.sql.DriverManager.getConnection(Unknown Source) at java.sql.DriverManager.getConnection(Unknown Source) at com.cisco.server.persistence.util.OracleSchemaUtil.openConnection(OracleSchemaUtil.java:277) at com.cisco.server.persistence.util.OracleSchemaUtil.dbServerUp(OracleSchemaUtil.java:836) at com.cisco.packaging.DBAdmin.dbServerUp(DBAdmin.java:1429) at com.cisco.packaging.WCSAdmin.status(WCSAdmin.java:833) at com.cisco.packaging.WCSAdmin.status(WCSAdmin.java:757) at com.cisco.packaging.WCSAdmin.wcsServerUp(WCSAdmin.java:637) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:294) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) Caused by: oracle.net.ns.NetException: The Network Adapter could not establish the connection at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:375) at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422) at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:678) at oracle.net.ns.NSProtocol.connect(NSProtocol.java:238) at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1054) at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:308) ... 15 more Caused by: java.net.ConnectException: Connection refused at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(Unknown Source) at java.net.PlainSocketImpl.connectToAddress(Unknown Source) at java.net.PlainSocketImpl.connect(Unknown Source) at java.net.SocksSocketImpl.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at oracle.net.nt.TcpNTAdapter.connect(TcpNTAdapter.java:209) at oracle.net.nt.ConnOption.connect(ConnOption.java:123) at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:353) ... 20 more 07/18/13 10:25:40.347 INFO [admin] [main] 07/18/13 10:25:40.347 INFO [admin] [main] Starting Network Control System... 07/18/13 10:25:40.347 INFO [admin] [main] 07/18/13 10:25:40.394 ERROR [admin] [main] Problem using CARS API: com.cisco.cars.fnd.CARSException: CARS_FAILURE : -999 : Failed to get UDI configuration. : Failure occurred during request at com.cisco.cars.fnd.CARSException.analyzeReturnCode(CARSException.java:118) at com.cisco.cars.serviceEngine.impl.EngineAdminServiceImpl.getUDI(EngineAdminServiceImpl.java:66) at com.cisco.wnbu.udi.impl.UDIManager.generateUDI(UDIManager.java:69) at com.cisco.wnbu.udi.impl.UDIManager.setPersistenceDirectory(UDIManager.java:139) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:332) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) 07/18/13 10:25:40.396 ERROR [admin] [main] Problem using CARS API: com.cisco.cars.fnd.CARSException: CARS_FAILURE : -999 : Failed to get UDI configuration. : Failure occurred during request at com.cisco.cars.fnd.CARSException.analyzeReturnCode(CARSException.java:118) at com.cisco.cars.serviceEngine.impl.EngineAdminServiceImpl.getUDI(EngineAdminServiceImpl.java:66) at com.cisco.wnbu.udi.impl.UDIManager.generateUDI(UDIManager.java:69) at com.cisco.wnbu.udi.impl.UDIManager.setVirtualPID(UDIManager.java:169) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:333) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) 07/18/13 10:25:40.397 ERROR [admin] [main] Problem using CARS API: com.cisco.cars.fnd.CARSException: CARS_FAILURE : -999 : Failed to get UDI configuration. : Failure occurred during request at com.cisco.cars.fnd.CARSException.analyzeReturnCode(CARSException.java:118) at com.cisco.cars.serviceEngine.impl.EngineAdminServiceImpl.getUDI(EngineAdminServiceImpl.java:66) at com.cisco.wnbu.udi.impl.UDIManager.generateUDI(UDIManager.java:69) at com.cisco.wnbu.udi.impl.UDIManager.setPhysicalPID(UDIManager.java:154) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:334) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) 07/18/13 10:25:40.397 ERROR [admin] [main] Problem using CARS API: com.cisco.cars.fnd.CARSException: CARS_FAILURE : -999 : Failed to get UDI configuration. : Failure occurred during request at com.cisco.cars.fnd.CARSException.analyzeReturnCode(CARSException.java:118) at com.cisco.cars.serviceEngine.impl.EngineAdminServiceImpl.getUDI(EngineAdminServiceImpl.java:66) at com.cisco.wnbu.udi.impl.UDIManager.generateUDI(UDIManager.java:69) at com.cisco.wnbu.udi.impl.UDIManager.getUDI(UDIManager.java:112) at com.cisco.wnbu.udi.impl.UDIManager.isPhysicalAppliance(UDIManager.java:184) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:335) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) Any help is appreciated, Thanks

    Read the article

  • Two network adapters on Ubuntu Server 9.10 - Can't have both working at once?

    - by Rob
    I'm trying to set up two network adapters in Ubuntu (server edition) 9.10. One for the public internet, the other a private LAN. During the install, I was asked to pick a primary network adapter (eth0 or eth1). I chose eth0, gave the installer the details listed below in the contents of /etc/network/interfaces, and carried on. I've been using this adapter with these setting for the last few days, and every thing's been fine. Today, I decide it's time to set up the local adapter. I edit the /etc/network/interfaces to add the details for eth1 (see below), and restart networking with sudo /etc/init.d/networking restart. After this, attempting to ping the machine using it's external IP address fails, but I can ping it's local IP address. If I bring eth1 down using sudo ifdown eth1, I can successfully ping the machine via it's external IP address again (but obviously not it's internal IP address). Bringing eth1 back up returns us to the original problem state: external IP not working, internal IP working. Here's my /etc/network/interfaces (I've removed the external IP information, but these settings are unchanged from when it worked) rob@rhea:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary (public) network interface auto eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx network xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx # The secondary (private) network interface auto eth1 iface eth1 inet static address 192.168.99.4 netmask 255.255.255.0 network 192.168.99.0 broadcast 192.168.99.255 gateway 192.168.99.254 I then do this: rob@rhea:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... [ OK ] rob@rhea:~$ sudo ifup eth0 ifup: interface eth0 already configured rob@rhea:~$ sudo ifup eth1 ifup: interface eth1 already configured Then, from another machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for [external ip]: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), Back on the Ubuntu server in question: rob@rhea:~$ sudo ifdown eth1 ... and again on the other machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Ping statistics for [external ip]: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms So... what am I doing wrong?

    Read the article

  • Can't attach EC2 instance to Network Interface

    - by Ian Warburton
    When trying to attach a network interface, it says... No instances were found for this availability zone. My instance is in us-east-1c and my network interface is in us-east-1b. Is that significant? If so, how do I create the VPC in the same zone and if not then why this error? EDIT: I've re-created the VPC and the Network Interface is now us-east-1c and the EC2 instance is also us-east-1c. Same error message though!

    Read the article

  • Installing Win7 over PXE through Serva fails on Loading Network Resources

    - by Armand
    Trying to install Win7 OS to a Lenovo E335 with no DVD/CD. I have to do it either over PXE/Network or USB. Although I am able to get passt the installation menu of Serva, it fails on Loading Network Resources ... FAILED No NIC/Driver, ABORTING! This is the only log on the Serva Client PC and nothing on the Serva-server. Would appreciate if someone can tell me how to go pass this error. THe network card works fine, it has already loaded the Windows installation structure on a X: drive on the new laptop. Another detail: I am using a normal Ethernet Cable to connect the PCs. Should this be enough or a crossover cable is a must in this case?

    Read the article

  • "No active network adapters found" Hyper-V 2008 R2

    - by mnemosyn
    I fiddled around with the virtual network settings of my Hyper-V server, because Windows Update failed to run in the VMs. I set the flag that makes the NIC exclusively usable by the VM. Now, the host system tells me it has no active network adapters. What does that even mean? According to netsh, there are three enabled network connections. I tried to restart the NICs using devcon.exe (the correct x64 version), but that doesn't make any difference - still, devcon reports the NICs are there and they are activated?! Is there any way I can force the host to re-enable the NICs?

    Read the article

  • Windows - Use Local Service and/or Network Service account for a windows service

    - by user19185
    I've created a window's service that monitors files on a specific directory on our Windows OS. When a file is detected, the service does some file I/O, reads the files, creates sub-directories, etc. This service also uses database connectivity to connect to another server. My plan is to have the service run as the default "Local Service" account. Since I need to allow write/read privileges, which apparently the "Local Service" account does not do by default, I'm going to explicitly set "Full Control" privileges for the "Local Service" account on the folder that I'm reading/writing to and from. I believe the above is a good . My question is, for the folder that I'm reading and writing to, do I need to setup a "Network Service" role with full control access? I'm wondering since my service uses database connectivity to another server, if I'll need the "Network Service" account setup. I may be misunderstanding what the "Network Service" account does.

    Read the article

  • Need help diagnosing network performance issues

    - by tokes
    I am currently working in a developing country as a system analyst for a government department. My area of expertise is software projects, but I've come across a few issues with the network setup in my office. (Unfortunately, being a developing country, there's not a lot of professional help available for this sort of thing.) Most recently, I am trying to diagnose a problem with slowness on the network. Our office is connected to the internet via an ADSL wireless modem/router (called Router). The modem is connected via ethernet to a switch (called Switch). The modem also acts as a wireless access point (called Wireless1), though because it is in a room at the end of the floor, it's range is limited. There are ethernet ports installed around the office. The cables of these all lead back to the same switch. In closer vicinity to the bulk of the client computers, there is another wireless router that acts as an access point for those clients (called Wireless2). That router is connected via ethernet to a wall port, and therefore to Switch. There is also a Windows server which acts as a DNS server (called DNSBox) which is located in the same room and is connected directly to Switch. ---Internet----------| Router/Wireless1 192.168.10.1 ---------------| |----|=========| DNSBox | |-------------------- 192.168.10.4 --------------------| Switch |---Other clients---- | |-------------------- |----|=========| Wireless2 ------------------| 192.168.10.198 One final thing to mention about the network setup. All clients are configured with manual IP addresses. Their router/gateway is set to the IP address of Router, and their DNS server is set to the IP address of DNSBox (with a secondary IP set to an external IP - that of our ISP's DNS server). Here are the symptoms we are experiencing: Clients connected to Wireless2 AP experience slow and unstable connections to the internet. (Slow here is defined as speeds of ~1KB/s, though ping response times seem to be as normal.) Clients connected via ethernet to Switch also experience the same slowness. Clients connected to Wireless1 AP (i.e. connecting via wireless directly to the ADSL modem) experience normal connections to the internet. Clients connected via ethernet to Router (i.e. connecting via ethernet directly to the ADSL modem) also experience normal connections to the internet. I also tried to gauge the connection performance between two machines on the network via ethernet: A file transfer between two clients who were both directly connected to Switch was the fastest; A file transfer between one client directly connected to Switch, and one client directly connected to Router (which is directly connected to Switch) performed much slower; A file transfer between two clients directly connected to Router also performed slowly. Things I have attempted to diagnose the problem: Restarted Switch -- no change. We tried unplugging ethernet jacks from Switch 4 at a time and testing the internet connection. The thought here was that perhaps a client on the network has contracted a virus, and is possibly spamming the network with traffic? (Not very technical, I know.) Unfortunately we couldn't get any significant increases in performance using this method. There were a couple of times when it seemed to be better, but then the connection speed quickly dropped back to slow/dead pace. I didn't want to unplug all jacks from Switch because I was concerned that users might be affected or that I would re-plug in the jacks incorrectly (should I even be worried about that? a port is a port on a switch, right?) I tried swapping the ethernet cable used to connect Router to Switch -- no change in performance. I tried swapping the port used on Switch for Router -- no change in performance. Anyone got any ideas on what this could be? Should I be mentioning specific brand names/models of the hardware used? Virii outbreaks are common in this country/office -- what could I be doing to figure out if a virus is at fault? If it is a virus, it doesn't seem to be generating a lot of traffic to/from the internet, because a) I can still get a good speed if I am directly connected to Router / Wireless1 and b) our ISP data usage has not risen suspiciously. Thanks for your help! Update #1 Here are the specs of some of the hardware: Switch is an Edimax ES3132RL 32-Port 10/100 Rackmount Switch Router is a D-Link DSL-G604T Update #2 I just tried unplugging everything except a laptop and Router from Switch. Speeds are still slow. I guess that means that Router / Switch are not being flooded? It seems more and more likely that the cause is something to do with the interaction between Router and Switch. However, I still can't find any useful resources on setting the LAN speed for either (and I'm not well-versed in these advanced networking configurations).

    Read the article

  • WAMP, DD-WRT, Using DNSMasq to access multiple virtual hosts via aliases on local network

    - by christian
    I've updated my question to coincide with my progress I am attempting to configure WAMP on my development machine. I would like to use it in conjunction with DD-WRT's DNSMasq feature to access multiple virtual hosts via aliases (dev1.local,dev2.local,etc.) over my local wireless network. I have followed the following tutorial which allows me to setup virtual hosts and access on local network by ip addresses. http://www.logicspot.com/web-development-2/viewing-a-locally-hosted-website-with-your-smartphone/ I've got this up and running. For simplicity sake I'd still like to setup DNSMasq to connect via aliases. I have followed the following tutorial http://www.question-defense.com/2008/12/29/add-static-dns-entries-to-dd-wrt-router-firmware And the aliases load on my development machine, but I can not access via the aliases on my mobile devices connected to the local network. I can however access via IPs. Thanks for any help you can provide

    Read the article

  • Unidentified Connection in Compaq CQ61Windows7 OS on DSL cable network connection

    - by Mohammed Thouseef
    I have Dell studio with shared DSL internet connection my router is "NETGEAR DG834" & Network connection discription is "Broadcom netlink tm gigabit ethernet" this connection is working fine with dell laptop with Vista homepremium OS. My Question is? If i connect HPcompaq presario CQ61 in this connection it will automatically select Public network and display unidentified connection i tried several times but not suceeded its OS is Win7 home premium. but wireless networking is working fine only this problem is faceing with DSL cable connection when i diagnos the connection an error will generate "Local Area Connection does not have a valid IP configuration" in LAN Connection status window i noticed IPV4 & IPV6 Connectivity is showing "No Network Access" please can you clarify whats the problem.

    Read the article

  • Windows Service and Group Policy unable to access network share on Win2008 Domain

    - by Terence Johnson
    I have one computer on my domain that has suddenly stopped receiving software updates via group policy. Domain logins still work, and group policy on the machine is still being updated, so it knows that there are new packages to install and where to look for them, but every time it tries to install a package, it throws a 1622 error (location not found). Logged in users can reach the same network shares, and every other computer on network is installing the packages. Further investigation found that other services running as "System" on the problematic computer are also unable to authenticate to network shares. How do I diagnose/fix this computer's account in Active Directory? The computer account exists, and is a member of "Domain Computers" - or is there something else I should be looking at?

    Read the article

  • Windows with putty via USB serial cable to Linux serial port - output ok, input isn't

    - by Aharon Robbins
    I am trying to get two way serial communications going between a Windows XP system and a Linux system (RHEL 5). I have /sbin/agetty -L 9600 ttyS0 in /etc/inittab. I am using a generic USB to serial adaptor on Windows (Unitek) and a null modem cable. I have putty configured for 9600 baud, 8 bits, no parity, one stop bit, no flow control. I get the login prompt from agetty in the putty window but input does not work; I see weird characters in the putty screen. I can echo output into the device from windows and see it, but cat < /dev/ttyS0 just prints out weird characters from what I type. Any and all suggestions will be welcome. Thanks!

    Read the article

  • Remote Desktop, Host: 2008, Client: Windows 7, The remote computer requires Network Level Authentica

    - by deerchao
    Hi, today I accidently changed one option of Teminal Services, I checked "Allow connections only from computers running Remote Desktop with Network Level Authentication". After that, I can't connect to my server any more. The error says: The remote computer requires Network Level Authentication, which your computer does not support. But my client pcs(both home and at office) are running Windows 7, as far as I know, it shoud support NLA; And in About dialog of Remote Desktop Connection there says "Supports Network Level Authentication". My server is running Windows Server 2008, placed in IDC center; I could connect to it before I change the settings. All other sevices(like IIS, SQL Server) are running normally. For clients, I tried two PCs running Windows 7, and two virtual windows XP machine running in Virtual PC and Virtual Box, all of them gives the same error message. Is there a way I can make things right without go to IDC which is far away? Thanks.

    Read the article

  • Network issues with DNS not being found

    - by Anriëtte Combrink
    Hi there This is exactly like how our network looks like: Single server with a network router Everything is setup, but I cannot connect our Macs under the Login Options - Join... to this server. Our server's name is Toolbox and I have tried Toolbox.local, Toolbox.private, prepended the afp:// protocol to the name, but nothing, our Macs just don't want to connect this way. Our router has DHCP and gives out all the IP addresses naturally, would I have to add Toolbox.local to the DNS on the router and like it via static internal IP to the server? Our Macs keep giving the following error while trying to join the Network Account Server: Unable to add server Could not resolve the address (2200) What am I doing wrong?

    Read the article

  • Iphone 2G error "USB Device Not Recognized" on Windows 7

    - by John Sean
    hey guys i have a big prob with my iphone... when i connect my iphone 2G to my PC, then i become an error "USB Device Not Recognized". So the PC does not recognize my iphone. what i have to do? I have reinstalled ITunes, but unfortunately the prob. is not resolved. I would be glad if you can help me. thanks a lot. warm regards!

    Read the article

  • Delayed startup of network icon (wi-fi)

    - by Michael Dy
    When my Windows 7 Starter netbook boots up and after everything is loaded, it takes about five minutes before the network icon near the clock becomes functional. When there's an available wi-fi signal (which automatically connects to my netbook as preconfigured) after the boot, my netbook seamlessly connects to it even if the network icon cannot be clicked or accessed. (The icon is shown to be loading for about five minutes.) During this time, when I go to Network and Sharing Center, it takes the same time to load. So even while the icon and the Center cannot be accessed, I can surf the Internet. When my netbook was still new, it didn't have this issue. How do I fix this?

    Read the article

  • What is the difference betweeen "Network install" and "Network Boot" options in virt-manager when installing a new virtual machine

    - by Marwan
    From my understanding of PXE (Preboot Execution Environment), I know that there must be some negotiation first between the booting client and a DHCP server to obtain network parameters (IP address, etc) in order for the client to be able to fetch the boot loader and kernel image from the boot server. In other words, and aside from being a "virtual" machine, we're talking here about a "bare metal" machine, so there must be some "pre boot" mechanism for those negotiations to take place, and this is exactly what PXE is all about. When I think about the "Network install" option, I can't figure out how the new VM would be able to fetch the boot images (bootloader and kernel) without the previously mentioned mechanism. So, here is a short version of the question: When provisioning a new virtul machine, how do you expect the "Network install" option in virt-manager to work behind the scenes? Many thanks.

    Read the article

  • Scheduled task to map a network drive runs, but doesn't map the drive

    - by bikefixxer
    I have a task set up to run whenever the computer is logged onto that deletes all network folders and maps a network drive. Here is what is in the batch file: @echo off net use * /delete /y net use b: \\Server\Share /user:DOMAIN\Username password exit When the computer is restarted or logged off and back on, the task runs fine (according to the scheduled tasks window saying when it ran last) but the mapped drive doesn't show up. I'll open the command prompt and type "net use" and it simply says "There are no entries in the list". If I then right click on the task and run it, it works and the mapped drive shows up. I've checked the log and nothing shows up. I've tried adding a timer in the batch file so it waits 10 seconds (ping 1.1.1.1 -n 1 -w 10000nul) thinking that maybe the network wasn't connected, but that didn't work. What else can I try? Thanks!

    Read the article

  • Network bottleneck/throttling issue

    - by Gavin
    Hi all, It's my first day at a new company and i've been given the task to find out an issue with the internet connection. I noticed that whilst I was downloading a large file, the network grinds to a halt, except for my download. At first I thought it was the internet connection/modem but it seems that whilst the lockdown occurs, I am unable to access any network device. Has anyone experienced this before and if so, do you have any pointers? Looking at the setup. They have an DSL modem that connects to a 10/100 switch. There are only 5-6 computers on the network. Cheers Gavin

    Read the article

  • Setup kickstart boot for all installation media types (cd and usb-flash)

    - by Cucumber
    I created own custom CentOS iso. I used mkisofs make it. This is part of my isolinux.cfg file: label vesa menu label Install ^RAIDIX system kernel vmlinuz append initrd=initrd.img xdriver=vesa nomodeset text linux ks=cdrom:/isolinux/ks.cfg If I specify parameter ks=cdrom:/isolinux/ks.cfg my iso will boot only from cd or dvd-rom. If I specify parameter ks=hd:<device>:/ks.cfg my iso will boot only from usb-drive. Can I specify ks parameter to boot from both type of installation media?

    Read the article

  • git init --bare permission denied on 16gb USB stick

    - by Sour Lemon
    I am using GIT on a Windows 7 machine (64 bit) and have been learning how to use GIT to version control my files. Now I want to be able to create a --bare repository on an external device (in this case a 16gb USB stick) but unfortunately when I try to create a --bare repository on it I get the following error: f:/: Permission denied I am using the GIT Bash program which is installed with GIT on Windows machines, so these are the commands I am typing in (I am also opening the program as administrator by holding ctrl + shift when I open it) cd /f git init --bare f:/: Permission denied However if I create a normal repository it works just fine: cd /f git init Initialized empty repository in f:/.git/ Can anybody shed some light on why I can't create a --bare repository? Any help would be much appreciated.

    Read the article

  • I can't get router and switches configured properly for my home office network

    - by BernicusMaximus
    Networking Gurus, I recently built a new detached garage, with an office above. As such I had it tied into my existing home ethernet wiring. The ethernet signal is coming into the garage just fine, but I can not get my network configured the way I want because of problems trying to link the various router/switch devices. Please see the following links for the network diagrams: Home Network So basically, I can't my future state to work. I'm not sure if I'm using incompatible switches or what, but I tried the future state with some 4 port switches from best buy and had no luck. I resorted to setting up the Current State so I could operate. What I am looking for is help on how best to get my future state to work. Is this possible with my current configuration, and if not, what should I do? Any help is appreciated. Thanks, Bernie

    Read the article

  • external HDD with SATA & USB interface? [closed]

    - by GregH
    Anyone know of an external HDD that would have (in addition to USB) a SATA (eSATA) port/cable? i.e. Brand/Model Background - In one location I want to use it is I would like to increase the performance by cabling it directly to the PC SATA port, HOWEVER I don't want to have to open up the PC to do this each time. I was thinking of running a SATA cable out through the PC case so I just plug it directly into the external HDD in question. Perhaps it should be also externally powered too so I don't need to run a power cable out from the PC power supply.

    Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >