Search Results

Search found 8706 results on 349 pages for 'boot camp'.

Page 169/349 | < Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >

• No signal to monitor after driver install

  - by Hossam Riyad

  After installing 10.10 I used Hardware Drivers (Jockey) to install the graphics driver v11.2 for my ATI HD 5770. After restarting to activate the driver all went well and the boot screen showed up but not like the normal one the text was rough on the edges and after the boot finished the screen turned black and no signal. I have found some forum discussions about that issue but no fix worked for me. I use a DVI to VGA adapter and I have a View Sonic E70F CRT monitor. PC specs CPU: Intel Q8300 2.5/4 GPU: ATI Powercolor HD5770 1GB MB: Gigabyte EP43-UD3L RAM: 4GB 1066 Kingston

  Read the article

• Can't use my keyboard nor the touch pad while installing on a Dell Vostro 1510

  - by Kaushal Singh

  I am stuck with a very annoying problem which does not allow me to even install Ubuntu on my laptop (Dell Vostro 1510). In a simple walk through of the problematic scenario... I boot the Ubuntu from a boot able CD. I got to a point where it ask for the language options, I select the English as my option using arrows keys and press enter. Then the option come where a.) try from the live cd b.) install ubuntu c.) etc etc Is needed to be selected. For which I press enter. Once I press enter... In any of the next steps of installing Ubuntu, my keypad and touch pad does not work. P.S.: My Batteries are completely dried Up... Can't use batteries. Does this problem has anything to do with batteries?

  Read the article

• Command works partially when run from startup applications

  - by Gaurav Butola

  I have this script (or rather a set of commands which has permission to execute) to enable two finger scrolling and two finger tap = right click The script is located in /home/gaurav/Multigesture/multigesture. When I run the following command in terminal, two finger scrolling and two finger tap = right click start working. I have to run this command each time I boot my laptop. "/home/gaurav/Multigesture/multigesture" So I put this command in the startup applications so that I dont have to run the command each time I boot but when I reboot two finger scrolling is not working, only two finger tap = right click works. What could be the problem, If the command works fine from the terminal then how come it is working partially when i put it into startup applications. Here is the content of the script xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Two-Finger Scrolling" 8 1 xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Scrolling" 8 1 1 xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Pressure" 32 10 xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Width" 32 8 PS. the file which has all the commands (script's) name is multitouch

  Read the article

• Black screen while booting, after installing installing AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver on HP pavilion dm4

  - by Megharaj

  HP Pavilion dm4 with configuration as shown below cpu intel Core i5 2.26 GHz RAM 4.0 GB Graphics processor 512MB ATI Mobility Radeon(TM) HD 5450 switchable graphics [HDMI, VGA]. I installed ubuntu 10.04 ( without AMD graphics driver) it was working fine, but when I installed AMD graphics drivers AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver, than the problem started from then When I boot I was get black screen. Than I thought to upgrade from ubuntu 10.04 to 12.04 using the bootable pen drive but was getting black screen than read on some forums that was because of the switchable graphics, than upgraded ubuntu 12.04 by setting to "nomodeset". It was working, again thought to install graphics driver AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver, again after installing this, when I boot I am getting blank scree . Can anyone help me to inatall ubuntu 12.04 along with AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver. Any help is highly appreciated.

  Read the article

• FGLRX installation without main monitor

  - by Chris

  This is a spiritual follow up to this I am doing some modern OpenGL tutorials and I have found that MESA does not support openGL 3.0+, so I need to get back to FGLRX even if its given me grief in the past. Every time I have tried to install FGLRX drivers I generally get thrown to the terminal and have to do some recovery, etc. before I can get them to work. Problem is, now that my main monitor is borked, when I install FGLRX drivers I cannot boot to terminal. Question: How do I back up my current windowing so that when I (inevitably) lost my boot due to FGLRX installation, I can recover it with a livecd without reinstalling, and how can I install it without a main monitor?

  Read the article

• Have I fixed my partition problem with os x 10.5.8? Are my GPT and MBR back to normal?

  - by David Schaap

  I'm new to linux and I have overstepped by abilities. I tried dual booting os x 10.5.8 with ubuntu 11.10 with rEFIt, but I been having problems with partitioning. Instead of enduring more headaches, I've made the decision to simply use ubuntu on VirtualBox. I've tried to return my HDD to normal, but I am looking for confirmation that my partitions are ok. Here is the report from partition inspector: *** Report for internal hard disk *** Current GPT partition table: # Start LBA End LBA Type 1 409640 233917359 Mac OS X HFS+ Current MBR partition table: # A Start LBA End LBA Type 1 1 234441647 ee EFI Protective MBR contents: Boot Code: GRUB Partition at LBA 409640: Boot Code: None File System: HFS Extended (HFS+) Listed in GPT as partition 1, type Mac OS X HFS+ Also, my HDD directory has a bunch of extra folders in them and they appear to be ubuntu related, although it is no longer installed. folders like bin, sbin, cores, var, user, and so on. Those folders aren't supposed to be there, right? Thanks in advance.

  Read the article

• Unable to get screen signal after purge FGLRX

  - by Boris

  I thought that my ATI driver was not running well so I wanted to re-instal it completely. I did: sudo apt-get remove --purge fglrx* sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon and after a boot I wanted to intal the ATI driver BUT at the boot no more signal to my screen. Since, every time I turn on my PC it gets to purple screen and then screen shuts down ! Note that: Even if the screen is off, PC seems to be running almost well: I m still able to use my network to access data shared with NFS. Using live USB I have no screen problem. I tried to plug my screen on an alternative output but it did not work. I tried CTRL+ALT+F1 while being on purple screen but it does not do anything, screen shut down anyway. I m going to try the SHIFT thing and learn from blackscreen wiki...

  Read the article

• Build a custom Ubuntu based distribution

  - by user51447

  I am working on making a custom Ubuntu 11.10 based distro.(64 bit) I am adding non open source packages, replacing packages, changed user interface from Unity to GNOME, and more changes. My system is ready, and I want to create a redistributable image for my distro. When you go to system settings - system info, you see a logo with the Ubuntu name and logo, but I want to change it to the name and logo of my distro. Also, in the boot menu, I want to change the boot entry names, and the GRUB background. And I want to change the name Ubuntu from every possible location. Also, I will be sharing it with people, so I want to make my own software repositories, like linux mint has, or any other distro has, I will purchase server space for that. Also, the I want to customize the wubi installer like linux mint did and if some uses the customized tool to install my distro from Windows, they should see the name of my distro in add or remove programs page. Any help will be appreciated!

  Read the article

• Xen 4.0.1 on Ubuntu 10.10 not booting

  - by Disco

  I'm trying to get Xen 4.0.1 run as dom0 on a fresh/clean install of 10.10 desktop (x64). Followed the step by step tutorial at http://wiki.xensource.com/xenwiki/Xen4.0 I have the pvops kernel in /boot, also included the ext4 fs support by recompiling the kernel by : make -j6 linux-2.6-pvops-config CONFIGMODE=menuconfig make -j6 linux-2.6-pvops-build make -j6 linux-2.6-pvops-install Here's my grub entry : menuentry 'Xen4' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 insmod ext3 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 2bf3177a-92fd-4196-901a-da8d810b04b4 multiboot /xen-4.0.gz dom0_mem=1024M loglvl=all guest_loglvl=all module /vmlinuz-2.6.32.27 root=UUID=2bf3177a-92fd-4196-901a-da8d810b04b4 ro module /initrd.img-2.6.32.27 } blkid /dev/sda1 gives the : /dev/sda1: UUID="2bf3177a-92fd-4196-901a-da8d810b04b4" TYPE="ext3" My partition shemes is : /boot (ext3) / (ext4) Whatever option i've tried i end up with : mounting none on /dev failed: no such file or directory And message complaining that it cannot find the device with uuid ... It's taking my hairs out, if somone has a clue ...

  Read the article

• Installing on a Lenovo S10-3

  - by Søren Hauberg

  I'm trying to install Ubuntu 10.10 netbook edition on my Lenovo S10-3. According to the release notes, there is a bug in the kernel that forces me to add intel_idle.max_cstate=0 to the kernel parameters. I did this when booting the install CD and I was able to install Ubuntu. During the installation I chose to fetch updates from the net. Now when I try to boot the machine it just hangs. I have tried booting the machine as-is and I have tried adding the above-mentioned kernel parameters. Same experience. So, my questions is how do I install 10.10 in this machine and how do I boot it after I've installed the OS?

  Read the article

• VMWare-Tools Installation fails

  - by Ajay

  I am trying to install VMwareTools-8.4.6-385536.tar.gz (VMWare Tools) on the following operating system: Ubuntu 11.04 Linux ubuntu 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 i686 i386 GNU/Linux I am using VMPlayer version 3.1.4 - build 385536 After starting the installation I am getting the following errors: What is the directory that contains the init scripts? [/etc/init.d] Error opening No such file or directory Distribution provided drivers for Xorg X server are used. Skipping X configuration because X drivers are not included. Creating a new initrd boot image for the kernel.<br> update-initramfs: Generating /boot/initrd.img-2.6.38-8-generic Starting VMware Tools services in the virtual machine: Switching to guest configuration: done Blocking file system: done Guest operating system daemon: failed Virtual Printing daemon: done Unable to start services for VMware Tools Can somebody help in this?

  Read the article

• SPARC T5-4 LDoms for RAC and WebLogic Clusters

  - by Jeff Taylor-Oracle

  I wanted to use two Oracle SPARC T5-4 servers to simultaneously host both Oracle RAC and a WebLogic Server Cluster. I chose to use Oracle VM Server for SPARC to create a cluster like this: There are plenty of trade offs and decisions that need to be made, for example: Rather than configuring the system by hand, you might want to use an Oracle SuperCluster T5-8 My configuration is similar to jsavit's: Availability Best Practices - Example configuring a T5-8 but I chose to ignore some of the advice. Maybe I should have included an  alternate service domain, but I decided that I already had enough redundancy Both Oracle SPARC T5-4 servers were to be configured like this: Cntl 0.25  4  64GB                     App LDom                    2.75 CPU's                                        44 cores                                          704 GB              DB LDom      One CPU         16 cores         256 GB   The systems started with everything in the primary domain: # ldm list NAME             STATE      FLAGS   CONS    VCPU  MEMORY   UTIL  NORM  UPTIME primary          active     -n-c--  UART    512   1023G    0.0%  0.0%  11m # ldm list-spconfig factory-default [current] primary # ldm list -o core,memory,physio NAME              primary           CORE     CID    CPUSET     0      (0, 1, 2, 3, 4, 5, 6, 7)     1      (8, 9, 10, 11, 12, 13, 14, 15)     2      (16, 17, 18, 19, 20, 21, 22, 23) -- SNIP     62     (496, 497, 498, 499, 500, 501, 502, 503)     63     (504, 505, 506, 507, 508, 509, 510, 511) MEMORY     RA               PA               SIZE                 0x30000000       0x30000000       255G     0x80000000000    0x80000000000    256G     0x100000000000   0x100000000000   256G     0x180000000000   0x180000000000   256G # Give this memory block to the DB LDom IO     DEVICE                           PSEUDONYM        OPTIONS     pci@300                          pci_0                pci@340                          pci_1                pci@380                          pci_2                pci@3c0                          pci_3                pci@400                          pci_4                pci@440                          pci_5                pci@480                          pci_6                pci@4c0                          pci_7                pci@300/pci@1/pci@0/pci@6        /SYS/RCSA/PCIE1     pci@300/pci@1/pci@0/pci@c        /SYS/RCSA/PCIE2     pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0     pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0        pci@340/pci@1/pci@0/pci@6        /SYS/RCSA/PCIE3     pci@340/pci@1/pci@0/pci@c        /SYS/RCSA/PCIE4     pci@380/pci@1/pci@0/pci@a        /SYS/RCSA/PCIE9     pci@380/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE10     pci@3c0/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE11     pci@3c0/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE12     pci@400/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE5     pci@400/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE6     pci@440/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE7     pci@440/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE8     pci@480/pci@1/pci@0/pci@a        /SYS/RCSA/PCIE13     pci@480/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE14     pci@4c0/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE15     pci@4c0/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE16     pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1     pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2    Added an additional service processor configuration: # ldm add-spconfig split # ldm list-spconfig factory-default primary split [current] And removed many of the resources from the primary domain: # ldm start-reconf primary # ldm set-core 4 primary # ldm set-memory 32G primary # ldm rm-io pci@340 primary # ldm rm-io pci@380 primary # ldm rm-io pci@3c0 primary # ldm rm-io pci@400 primary # ldm rm-io pci@440 primary # ldm rm-io pci@480 primary # ldm rm-io pci@4c0 primary # init 6 Needed to add resources to the guest domains: # ldm add-domain db # ldm set-core cid=`seq -s"," 48 63` db # ldm add-memory mblock=0x180000000000:256G db # ldm add-io pci@480 db # ldm add-io pci@4c0 db # ldm add-domain app # ldm set-core 44 app # ldm set-memory 704G  app # ldm add-io pci@340 app # ldm add-io pci@380 app # ldm add-io pci@3c0 app # ldm add-io pci@400 app # ldm add-io pci@440 app Needed to set up services: # ldm add-vds primary-vds0 primary # ldm add-vcc port-range=5000-5100 primary-vcc0 primary Needed to add a virtual network port for the WebLogic application domain: # ipadm NAME              CLASS/TYPE STATE        UNDER      ADDR lo0               loopback   ok           --         --    lo0/v4         static     ok           --         ...    lo0/v6         static     ok           --         ... net0              ip         ok           --         ...    net0/v4        static     ok           --         xxx.xxx.xxx.xxx/24    net0/v6        addrconf   ok           --         ....    net0/v6        addrconf   ok           --         ... net8              ip         ok           --         --    net8/v4        static     ok           --         ... # dladm show-phys LINK              MEDIA                STATE      SPEED  DUPLEX    DEVICE net1              Ethernet             unknown    0      unknown   ixgbe1 net0              Ethernet             up         1000   full      ixgbe0 net8              Ethernet             up         10     full      usbecm2 # ldm add-vsw net-dev=net0 primary-vsw0 primary # ldm add-vnet vnet1 primary-vsw0 app Needed to add a virtual disk to the WebLogic application domain: # format Searching for disks...done AVAILABLE DISK SELECTIONS:        0. c0t5000CCA02505F874d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB>           /scsi_vhci/disk@g5000cca02505f874           /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD0/disk        1. c0t5000CCA02506C468d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB>           /scsi_vhci/disk@g5000cca02506c468           /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD1/disk        2. c0t5000CCA025067E5Cd0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB>           /scsi_vhci/disk@g5000cca025067e5c           /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD2/disk        3. c0t5000CCA02506C258d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB>           /scsi_vhci/disk@g5000cca02506c258           /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD3/disk Specify disk (enter its number): ^C # ldm add-vdsdev /dev/dsk/c0t5000CCA02506C468d0s2 HDD1@primary-vds0 # ldm add-vdisk HDD1 HDD1@primary-vds0 app Add some additional spice to the pot: # ldm set-variable auto-boot\\?=false db # ldm set-variable auto-boot\\?=false app # ldm set-var boot-device=HDD1 app Bind the logical domains: # ldm bind db # ldm bind app At the end of the process, the system is set up like this: # ldm list -o core,memory,physio NAME             primary          CORE     CID    CPUSET     0      (0, 1, 2, 3, 4, 5, 6, 7)     1      (8, 9, 10, 11, 12, 13, 14, 15)     2      (16, 17, 18, 19, 20, 21, 22, 23)     3      (24, 25, 26, 27, 28, 29, 30, 31) MEMORY     RA               PA               SIZE                0x30000000       0x30000000       32G IO     DEVICE                           PSEUDONYM        OPTIONS     pci@300                          pci_0               pci@300/pci@1/pci@0/pci@6        /SYS/RCSA/PCIE1     pci@300/pci@1/pci@0/pci@c        /SYS/RCSA/PCIE2     pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0     pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0   ------------------------------------------------------------------------------ NAME             app              CORE     CID    CPUSET     4      (32, 33, 34, 35, 36, 37, 38, 39)     5      (40, 41, 42, 43, 44, 45, 46, 47)     6      (48, 49, 50, 51, 52, 53, 54, 55)     7      (56, 57, 58, 59, 60, 61, 62, 63)     8      (64, 65, 66, 67, 68, 69, 70, 71)     9      (72, 73, 74, 75, 76, 77, 78, 79)     10     (80, 81, 82, 83, 84, 85, 86, 87)     11     (88, 89, 90, 91, 92, 93, 94, 95)     12     (96, 97, 98, 99, 100, 101, 102, 103)     13     (104, 105, 106, 107, 108, 109, 110, 111)     14     (112, 113, 114, 115, 116, 117, 118, 119)     15     (120, 121, 122, 123, 124, 125, 126, 127)     16     (128, 129, 130, 131, 132, 133, 134, 135)     17     (136, 137, 138, 139, 140, 141, 142, 143)     18     (144, 145, 146, 147, 148, 149, 150, 151)     19     (152, 153, 154, 155, 156, 157, 158, 159)     20     (160, 161, 162, 163, 164, 165, 166, 167)     21     (168, 169, 170, 171, 172, 173, 174, 175)     22     (176, 177, 178, 179, 180, 181, 182, 183)     23     (184, 185, 186, 187, 188, 189, 190, 191)     24     (192, 193, 194, 195, 196, 197, 198, 199)     25     (200, 201, 202, 203, 204, 205, 206, 207)     26     (208, 209, 210, 211, 212, 213, 214, 215)     27     (216, 217, 218, 219, 220, 221, 222, 223)     28     (224, 225, 226, 227, 228, 229, 230, 231)     29     (232, 233, 234, 235, 236, 237, 238, 239)     30     (240, 241, 242, 243, 244, 245, 246, 247)     31     (248, 249, 250, 251, 252, 253, 254, 255)     32     (256, 257, 258, 259, 260, 261, 262, 263)     33     (264, 265, 266, 267, 268, 269, 270, 271)     34     (272, 273, 274, 275, 276, 277, 278, 279)     35     (280, 281, 282, 283, 284, 285, 286, 287)     36     (288, 289, 290, 291, 292, 293, 294, 295)     37     (296, 297, 298, 299, 300, 301, 302, 303)     38     (304, 305, 306, 307, 308, 309, 310, 311)     39     (312, 313, 314, 315, 316, 317, 318, 319)     40     (320, 321, 322, 323, 324, 325, 326, 327)     41     (328, 329, 330, 331, 332, 333, 334, 335)     42     (336, 337, 338, 339, 340, 341, 342, 343)     43     (344, 345, 346, 347, 348, 349, 350, 351)     44     (352, 353, 354, 355, 356, 357, 358, 359)     45     (360, 361, 362, 363, 364, 365, 366, 367)     46     (368, 369, 370, 371, 372, 373, 374, 375)     47     (376, 377, 378, 379, 380, 381, 382, 383) MEMORY     RA               PA               SIZE                0x30000000       0x830000000      192G     0x4000000000     0x80000000000    256G     0x8080000000     0x100000000000   256G IO     DEVICE                           PSEUDONYM        OPTIONS     pci@340                          pci_1               pci@380                          pci_2               pci@3c0                          pci_3               pci@400                          pci_4               pci@440                          pci_5               pci@340/pci@1/pci@0/pci@6        /SYS/RCSA/PCIE3     pci@340/pci@1/pci@0/pci@c        /SYS/RCSA/PCIE4     pci@380/pci@1/pci@0/pci@a        /SYS/RCSA/PCIE9     pci@380/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE10     pci@3c0/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE11     pci@3c0/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE12     pci@400/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE5     pci@400/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE6     pci@440/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE7     pci@440/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE8 ------------------------------------------------------------------------------ NAME             db               CORE     CID    CPUSET     48     (384, 385, 386, 387, 388, 389, 390, 391)     49     (392, 393, 394, 395, 396, 397, 398, 399)     50     (400, 401, 402, 403, 404, 405, 406, 407)     51     (408, 409, 410, 411, 412, 413, 414, 415)     52     (416, 417, 418, 419, 420, 421, 422, 423)     53     (424, 425, 426, 427, 428, 429, 430, 431)     54     (432, 433, 434, 435, 436, 437, 438, 439)     55     (440, 441, 442, 443, 444, 445, 446, 447)     56     (448, 449, 450, 451, 452, 453, 454, 455)     57     (456, 457, 458, 459, 460, 461, 462, 463)     58     (464, 465, 466, 467, 468, 469, 470, 471)     59     (472, 473, 474, 475, 476, 477, 478, 479)     60     (480, 481, 482, 483, 484, 485, 486, 487)     61     (488, 489, 490, 491, 492, 493, 494, 495)     62     (496, 497, 498, 499, 500, 501, 502, 503)     63     (504, 505, 506, 507, 508, 509, 510, 511) MEMORY     RA               PA               SIZE                0x80000000       0x180000000000   256G IO     DEVICE                           PSEUDONYM        OPTIONS     pci@480                          pci_6               pci@4c0                          pci_7               pci@480/pci@1/pci@0/pci@a        /SYS/RCSA/PCIE13     pci@480/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE14     pci@4c0/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE15     pci@4c0/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE16     pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1     pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2   Start the domains: # ldm start app LDom app started # ldm start db LDom db started Make sure to start the vntsd service that was created, above. # svcs -a | grep ldo disabled        8:38:38 svc:/ldoms/vntsd:default online          8:38:58 svc:/ldoms/agents:default online          8:39:25 svc:/ldoms/ldmd:default # svcadm enable vntsd Now use the MAC address to configure the Solaris 11 Automated Installation. Database Logical Domain # telnet localhost 5000 {0} ok devalias screen                   /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@7/display@0 disk7                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p3 disk6                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p2 disk5                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p1 disk4                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p0 scsi1                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0 net3                     /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0,1 net2                     /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 virtual-console          /virtual-devices/console@1 name                     aliases {0} ok boot net2 Boot device: /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0  File and args: 1000 Mbps full duplex Link up Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx WLS Logical Domain # telnet localhost 5001 {0} ok devalias hdd1                     /virtual-devices@100/channel-devices@200/disk@0 vnet1                    /virtual-devices@100/channel-devices@200/network@0 net                      /virtual-devices@100/channel-devices@200/network@0 disk                     /virtual-devices@100/channel-devices@200/disk@0 virtual-console          /virtual-devices/console@1 name                     aliases {0} ok boot net Boot device: /virtual-devices@100/channel-devices@200/network@0  File and args: Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx Repeat the process for the second SPARC T5-4, install Solaris, RAC and WebLogic Cluster, and you are ready to go. Maybe buying a SuperCluster would have been easier.

  Read the article

• No Internet On 12.04.1

  - by David Ramos

  I have no internet on Ubuntu 12.04.1 so i'm on a desktop so I got to install a .exe program to run my wireless card for my desktop so I got internet access, But I can't seem to download wine or its source files. If I do I put on my usb and boot into Ubuntu but then when I try to open it I get the programs source files etc. Anyone who could help me Please do :| ( I can't install wine from software center since I have no connection online). Note : I can download my stuff on windows 8 boot so I can transfer files to my usb to run on Ubuntu.

  Read the article

• Hard drive and DVD drive are not being detected by the BIOS

  - by Shah Nsd

  My hard drive and DVD drive are not being detected by the BIOS when I go in to the boot option menu by pressing F12. When I put the hard drive in a different computer it's being detected. I am assuming it's either the mother board or the BIOS. Since the HDD is not being detected I have installed Ubuntu on a flash drive, but even that has become so slow, that it takes around 5 minutes for it to boot. I want to flash the BIOS before I think of changing the motherboard. I have downloaded the updated file and it has a flash.bat and a afudos.exe. I have to run the .bat file. I downloaded the Dos in a box and went to the DOS directory where the .bat file is and tried to run it, but it gives me the error message "This program cannot run under this operating system" Any help would be appreciated

  Read the article

• Crash Report in Ubuntu... hardware problem?

  - by Andrew

  Got this on my machine. I was just browsing the web on Chrome and my computer froze. I recently just built this machine. I have a feeling it is a hardware problem... Possibly one of my parts arrived broken in some way.... Starting anac(h)ronistic cron Stopping anac(h)ronistic cron Stopping cold plug devices Stopping log initial device creation Starting enable remaining boot-time encrypted block devices Starting configure network device security Starting configure virtual network devices Starting save udev log and update rules Stopping configure virtual network devices Stopping save udev log and update rules Checking battery state... Stopping System V runlevel compatibility Stopping enable remaining boot-time encrypted block devices Stopping Mount filesystems on boot 91.573384] BUG: unable to handle kernel NULL pointer dereference at (null) 91.573437] IP: [<ffffffff81313514>] strcmp+0x14/0x30 91.573470] PGD 1f7822067 PUD 1ed7a6067 PMD 0 91.573498] Oops: 0000 [#1] SMP 91.573519] CPU 3 91.573531] Modules linked in: dm_crypt bnep snd_hda_codec_realtek rfcomm bluetooth parport_pc ppdev arc4 fglrx(P) rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib mac0021 cfg80211 psmouse snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer send_seq_device snd joydev mac_hid mei(C) soundcore serio_raw snd_page_alloc lp parport ses enclosure usbhid hid i915 drm_kms_helper drm i2c_algo_bit mxm_umi tg_video wmi usb_storage 91.573826] 91.573837] Pid: 2297, comm: update-notifier Tainted: P C O 3.2.0-29-generic #46-Ubuntu To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Extreme4 91.573912] RIP: 0010:[<ffffffff81313514>] [<ffffffff81313514>] strcmp+0x14/0x30 91.573954] RSP: 0018:ffff8801f83f5bb8 EFLAGS: 00010246 91.573982] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 91.574019] RDX: 0000000000000069 RSI: 0000000000000000 RDI: ffff88021adb26f8 91.574056] RBP: ffff8801f83f5bb8 R08: ffff88022f2d6e80 R09: 0000000000000000 91.574093] R10: ffff88021e7dbf00 R11: 0000000000000003 R12: ffff88021c10eb40 91.574130] R13: 0000000000000000 R14: ffff88021adb26f8 R15: ffff8801f83f5d40 91.574168] FS: 00007f958cf53940(0000) GS:ffff88022f2c0000(0000) kn1GS:0000000000000000 91.574210] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 91.574240] CR2: 0000000000000000 CR3: 000000021f6d7000 CR4: 00000000000406e0 91.574277] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 91.574314] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000000 91.574351] Process update-notifier (pid: 2297, threadinfo ffff801f83f4000, task ffff880208fe2e00) 91.574397] Stack: 91.574409] ffff8801f83f5be8 ffffffff811ed509 ffff88021adb26c0 ffff88021b8b7020 91.574453] ffff88021b461c60 fffffffffffffffe ffff8801f83f5c18 ffffffff811ed61f 91.574496] ffff88021adb26c0 ffff88021b8b7020 ffff8801f83f5dc8 0000000000000001 91.574539] Call Trace: 91.574558] [<ffffffff811ed509] sysfs_find_dirent+0x59/0x110 91.574591] [<ffffffff811ed61f] sysfs_lookup+0x5f/0x110 91.574621] [<ffffffff81182745] d_alloc_and_lookup+0x45/0x90 91.574654] [<ffffffff8118fe65] ? d_lookup+0x35/0x60 91.574683] [<ffffffff811848d2] do_lookup+0x202/0x310 91.574712] [<ffffffff8118660c] path_lookupat+0x11c/0x750 91.574744] [<ffffffff81318db7] ? __strncpy_from_user+0x27/0x60 91.574778] [<ffffffff81186c71] do_path_lookup+0x31/0xc0 91.574809] [<ffffffff81187779] user_path_at_empty+0x59/0xa0 91.574842] [<ffffffff81187822] ? do_filp_open+0x42/0xa0 91.574872] [<ffffffff811877d1] user_path_at+0x11/0x20 91.574902] [<ffffffff8117c80a] vfs_fstatat+0x3a/0x70 91.574933] [<ffffffff81161cff] ? kmem_cache_free+0x2f/0x110 91.574965] [<ffffffff8117c85e] vfs_lstat+-x31/0x70 91.574993] [<ffffffff8117c9fa] sys_newlstat+0x1a/0x40 91.575022] [<ffffffff81176ee1] ? do_sys_open+0x171/0x220 91.575053] [<ffffffff8117cb1a] ? sys_readlinkat+0x7a/0xb0 91.575086] [<ffffffff81661ec2] system_call_fastpath+0x16/0x1b 91.575118] Code: 83 c1 01 40 84 ff 75 ef 5d c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 00 55 31 c0 48 89 e5 66 2e 0f 1f 84 00 00 00 00 00 0f b6 14 07 <3a> 14 06 75 0f 48 83 c0 01 84 d2 75 ef 31 c0 5d c3 0f 1f 00 19 91.577243] RIP [<ffffffff81313514>] strcmp+0x14/0x30 91.579314] RSP <ffff8801f83f5bb8> 91.581385] CR2: 0000000000000000

  Read the article

• How can I force X to start in a computer without a monitor?

  - by Javier Rivera

  I have I computer that have no monitor attached. When I boot it X fails to start because there is no monitor detected. If I boot it with a monitor attached and after X is started I remove the monitor everything works fine. Details and Background: This computer is a kind of hardware consolidation server. It's only purpose is to run two Virtual Box VM's that run Windows XP and some important but seldom used (once or twice a month) programs. For a couple of time it has been lying in a corner with an old monitor attached to it and working great. But space in the office was getting scarce and I moved the computer to the server room. There is no monitor attached to it there (no space), and sometimes the computer is rebooted. When it boots without monitor X is not started, the vms don't start and I get called to solve the problem.

  Read the article

• Using ext4 in VMware machine

  First of all, using a journaling filesystems like NTFS, ext4, XFS, or JFS (not to name all of them) is a very good idea and nowadays unthinkable not to do. Linux offers a good variety of different option as journaling filesystem for your system. Since years I am using SGI's XFS and I am pretty confident with stability, performance and liability of the system. In earlier years I had to struggle with incompatibilities between XFS and the boot loader. Using an ext2 formatted /boot solved this issue. But, wow, that is ages ago! Lately, I had to setup a fresh Lucid Lynx (Ubuntu 10.04 LTS) system for a change of our internal groupware / messaging system. Therefore, I fired up a new virtual machine with almost standard configuration in VMware Server and run through our network-based PXE boot and installation procedure. At a certain step in this process, Ubuntu asks you about the partitioning of your hard drive(s). Honestly, I have to say that only out of curiousity I sticked to the "default" suggestion and gave my faith and trust into the Ubuntu installation routine... Resulting to have an ext4 based root mount point ( / ). The rest of the installation went on without further concerns or worries. Note:I really can't remember why I chose to go away from my favourite... Well, it should turn out to be the wrong decision after all. Ok, let's continue the story about ext4 in a VMware based virtual machine. After some hours installing additional packages and configuring the new system using LDAP for general authentication and login, I had an "out-of-the-box" usable enterprise messaging system based on Zarafa 6.40 Community Edition inclusive proper SSL-based Webaccess interface and Z-Push extension for ActiveSync with my Nokia mobile. Straightforward and pretty nice for the time spent on the setup. Having priority on other tasks I let the system just running and didn't pay any further attention at all. Until I run into an upgrade of "Mail for Exchange" on Symbian OS. My mobile did not bother me at all with the upgrade and everything went smooth, but trying to re-establish the ActiveSync connection to the Zarafa messaging system resulted in a frustating situation. So, I shifted my focus back to the Linux system and I was amazed to figure out that the root had been remounted readonly due to hard drive failures or at least ext4 reported errors. Firing up Google only confirmed my concerns and it seems that using ext4 for VMware based virtual machines does not look like a stable and reliable candidate to me. You might consider reading those external resources: ext4 fs corruption under VMWare Server 2.01Bug #389555 - ext4 filesystem corruption Well, I learned my lesson and ext{2|3|4} based filesystems are not going to be used on any of my Linux systems or customer installations in the future. Addendum: I did not try this setup in other virtualization environments like VirtualBox, qemu, kvm, Xen, etc.

  Read the article

• Ubiquity crashes when installing from CD

  - by Ashes

  I didn't want to take any risks so I ordered a CD from Canonical to get Ubuntu. Thing is, another CD was given to me about 2 days before the CD from Canonical got to me, so I installed Ubuntu 10.10 but there was a problem with the login screen (When the Ubuntu logo should be displayed, it wasn't, instead it would just say "Ubuntu 10.10") so I decided to reinstall Ubuntu 10.10 with the CD that arrived a few days later. Whenever it's finishing the installation, the installer (ubiquity) crashes, or sometimes it gets to the part where the boot loader should be installed and for some reason it is unable to install the boot loader (if I choose not to install it, I don't get how to start Ubuntu, since you have to reboot my laptop after the installation is over). I'm currently running Ubuntu 10.10 from the CD I ordered, since I have no other OS on this laptop.

  Read the article

• Nvidia problems. I think.

  - by Nate D.

  Let me start off by saying, I've been trying to run Ubuntu on my custom PC for about 2 years. From 10.04 to 12.04, this problem persists. When I try to boot Ubuntu from either a USB stick or a CD, I see the normal Ubuntu splash screen. It looks like it's working, orange dots are moving, but then the screen glitches and freezes. I'm assuming this happens because there are no drivers for my graphics card (Nvidia GeForce 8800, I think). My motherboard has no onboard graphics, nor does it have a VGA out. So, how can I get this working on my system? Can I somehow put the drivers along side the .img on the USB stick? I can boot from my Ubuntu USB stick on my MacBook. In case that helps anyone...

  Read the article

• Low graphics mode on Ubuntu 12.04 with Intel Graphics

  - by NightShadeQueen

  When I boot, my computer just tells me it can't detect graphic card (or something else) settings and it has to use the low graphics mode. Then it gives me four choices, but doesn't let me choose any of them. I can get my computer to boot by going to some sort of terminal mode and then typing sudo gdm. The other graphics manager I have is lightdm. I originally had the nVidia propriety driver, and I've tried bumblebee. Mobile Intel Graphics Media Accelerator 4500M is my graphics card. Is there any way to fix this so I can use lightdm again?

  Read the article

• Ubuntu 12.04.1 LTS USB not being detected after formatting with Startup Disk Creator

  - by Zach

  sudo fdisk -l lists the drive, however, I cannot find it in the file explorer. Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d871e Device Boot Start End Blocks Id System /dev/sda1 * 2048 486322175 243160064 83 Linux /dev/sda2 486324222 488396799 1036289 5 Extended /dev/sda5 486324224 488396799 1036288 82 Linux swap / Solaris Disk /dev/sdb: 8195 MB, 8195480064 bytes 253 heads, 62 sectors/track, 1020 cylinders, total 16006797 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027ae4 Device Boot Start End Blocks Id System /dev/sdb1 * 62 15999719 M 7999829 c W95 FAT32 (LBA) Manually mounting it produces this error message :~$ sudo mount -t vfat /dev/sdb1 /media/external -ouiduid=1000,gid=1000,utf8,dmask=027,fmask=137 mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Is the usb toast?

  Read the article

• Got back Hibernation option, but cannot resume from Hibernate

  - by harisibrahimkv

  In my Ubuntu 12.04, the hibernation option was working well and fine. However, I installed Debian on another partition recently and when I again tried to boot to Ubuntu, I got a message on the boot splash screen saying : The disk drive for / is not ready yet or not present. Continue to wait; or press s to skip mounting or M for manual recovery. After logging into Ubuntu, I find that my hibernation option has gone missing. Is there anyway to recover the hibernation option? EDIT: I solved the disk drive problem and I got the hibernation option back. When I did "sudo pm-hibernate", my system went to hibernation. However, when powering on again, it booted up normally and thus there was no effect of hibernation. How can this be rectified? EDIT1: System - Lenovo ideapad s10-2. EDIT2: /etc/fstab

  Read the article

• Install Ubuntu on Mac OS X Mavericks, MacBook Air

  - by Unknown

  I was wondering if its okay to install Ubuntu on my Macbook Air, and if it is okay please let me know the procedure. I would prefer to do it by NOT using reFind (not sure what the name is). The following is my system specification. Hardware Overview: Model Name: MacBook Air Model Identifier: MacBookAir6,2 Processor Name: Intel Core i5 Processor Speed: 1.3 GHz Number of Processors: 1 Total Number of Cores: 2 L2 Cache (per Core): 256 KB L3 Cache: 3 MB Memory: 8 GB System Software Overview: System Version: OS X 10.9.2 (13C1021) Kernel Version: Darwin 13.1.0 Boot Volume: Macintosh HD Boot Mode: Normal MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.2)

  Read the article

• grub recover command line

  - by Rakesh Mohan Hallen

  Recently the service provider link suddenly broke,while I was updating. Then suddenly while I was trying to boot, i could not. The message on my screen was grub recover missing, and I had no option but the grub recover command line. I really did not know what to do. So I installed an earlier version of ubuntu 10.04. It started to boot normally. Now my system is back to 12.04 the version i was working with. How does one handle problems like this?

  Read the article

• Ubiquity crashes when installing Ubuntu 10.10 from CD

  - by Ashes

  I didn't want to take any risks so I ordered a CD from Canonical to get Ubuntu. Thing is, another CD was given to me about 2 days before the CD from Canonical got to me, so I installed Ubuntu 10.10 but there was a problem with the login screen (When the Ubuntu logo should be displayed, it wasn't, instead it would just say "Ubuntu 10.10") so I decided to reinstall Ubuntu 10.10 with the CD that arrived a few days later. Whenever it's finishing the installation, the installer (ubiquity) crashes, or sometimes it gets to the part where the boot loader should be installed and for some reason it is unable to install the boot loader (if I choose not to install it, I don't get how to start Ubuntu, since you have to reboot my laptop after the installation is over). I'm currently running Ubuntu 10.10 from the CD I ordered, since I have no other OS on this laptop.

  Read the article

< Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >