Search Results

Search found 4453 results on 179 pages for 'kernel parametes'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 169/179 | < Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >

  • Remote Debian System Preventing Logon

    - by choobablue
    I have a dozen or so single board computers on a network running Debian (squeeze) and access them via ssh (ssh server is dropbear). To give an idea of the hardware of these computers they're 1.2 GHz x86 processors, 1GB of RAM and 4GB flash drives formatted as ext2 (I avoided ext3 to prevent the added flash write stress from journaling), there is also a swap partition on the drive. Normally the setup I'm using works great and I can access all the computers. Every once in a while one will prevent access. What happens is I try to connect via ssh (putty) and it gives me the login prompt, I enter the username and password and it responds 'Access Denied' and it will also refuse any public key in ~/.ssh/authorized_keys. The credentials are correct as they worked previously. The computer responds to pings and putty recognizes the server public key, which implies to me the system is still running. Restarting the server fixes the problem and I can log in again. (I tried a temporary fix of putting shutdown -r now in the root crontab but this doesn't seem to reliably be run once the hang happens) Once I restart however there doesn't seem to be any information in any of the system logs to indicate what happened, the logs are simply empty for that time period, as if the system had crashed. There is some custom software running on the system which appears to stop working (which is why I wanted to ssh to begin with). I'm assuming that this program is the source of the problems but I'm unsure of how it would cause it and how to debug what is happening. The most likely explanation I can think of is that there is a memory leak in the other program that then prevents dropbear from spawning a new login shell (and crontab from executing shutdown) as there is not enough free memory. But looking at memory usage of the other (working) computers there doesn't seem to be any meaningful increase in memory to indicate a leak (unless it's a very big, fast acting and rare leak). I would think that when the OS ran out of memory it would restart the system or kill processes (the Linux kernel restarts right?). The other thing I wonder about is if the fact that they are running off a flash drive could have some effect, especially the swap partition (which I think I should remove to prevent wear of the flash), but the flash drives are young (~1 month) and I don't think that wear would be a factor yet. Does anybody have an idea of what could cause these symptoms, if it could be done by a memory leak, or something else I haven't thought of. And does anybody know of a method to try to debug the problem and find out more information about what's going wrong?

    Read the article

  • [CentOS 4.8] nslookup resolves domains to IPs, but I can't get a response to pings to external servers

    - by Beco
    I have a fresh install of CentOS 4.8 running on an internal development server. I haven't done anything to it besides setting up sudoers and SSH. I can SSH into the server and from there resolve domains to IPs and ping internal servers, but for some reason I don't get any response from pinging external servers. The software firewall is disabled, and the problem is present with both static and DHCP-assigned network configurations. The network domain controller is a Windows Server 2003 box. $ nslookup google.com Server: 10.254.2.5 Address: 10.254.2.5#53 Non-authoritative answer: Name: google.com Address: 74.125.47.147 Name: google.com Address: 74.125.47.99 <etc...> 10.254.2.5 is the Win2K3 server. $ ping google.com PING google.com (74.125.47.106) 56(84) bytes of data. It just hangs here indefinitely. $ cat /etc/resolv.conf ; generated by /sbin/dhclient-script search <...snip...>.local nameserver 10.254.2.5 nameserver 10.254.2.124 10.254.2.124 is the backup DC server, which is currently off and tombstoned by this point. The snipped section is our company name. # ifconfig eth0 Link encap:Ethernet HWaddr <snip> inet addr:10.254.2.101 Bcast:10.254.2.255 Mask:255.255.255.0 inet6 addr: <snip>/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:80066 errors:0 dropped:0 overruns:0 frame:0 TX packets:4421 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7810133 (7.4 MiB) TX bytes:590550 (576.7 KiB) Interrupt:225 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8104 (7.9 KiB) TX bytes:8104 (7.9 KiB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.254.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.254.2.5 0.0.0.0 UG 0 0 0 eth0 And, for good measure, a snapshot of the current ethernet config via the system-config-network GUI. Edit: I don't yet have enough rep to post images, so here's a link. Sorry! system-config-network snapshot I'm pretty green when it comes to setting up *nix dev servers and network configuration in general, so please let me know if I've left out critical information, or posted information I shouldn't have posted. Thanks!

    Read the article

  • No external network on ubuntu 9.10, though dns works..

    - by user29368
    Hi, I have a weird problem I cant solve. I have several computers, two with xubuntu 9.10 One of them, acting as a media server, has stopped to work when it comes to external network.. I can do for example: ping google.com Which gives me an ip adress back, like: name@Media:/etc$ ping google.com PING google.com (66.102.9.147) 56(84) bytes of data. That tells me it reaches the dns?, but I get no response at all... If I ping a local computer all works fine. I can also reach the computer via ssh without any problems. I have always used network manager, but now I uninstalled it and made the settings manually like this: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.52 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 Still no luck. I have no specific settings for this one in my router, and all the other computers, including my win laptop works fine. This is very annoying since I cant even do an update or anything.. ifconfig looks like this: eth0 Link encap:Ethernet HWaddr 00:24:1d:9f:10:89 inet addr:192.168.1.52 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::224:1dff:fe9f:1089/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15410 errors:0 dropped:0 overruns:0 frame:0 TX packets:2693 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1167398 (1.1 MB) TX bytes:694973 (694.9 KB) Interrupt:27 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2150 errors:0 dropped:0 overruns:0 frame:0 TX packets:2150 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:143456 (143.4 KB) TX bytes:143456 (143.4 KB) route -n like this Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 eth0 I do not know where the adress starting with 169.254 comes from.. Could that be a part of the problem? Hoping for some assistance since Im totally stuck here.. /george

    Read the article

  • MySQL 5.5 - Lost connection to MySQL server during query

    - by bully
    I have an Ubuntu 12.04 LTS server running at a german hoster (virtualized system). # uname -a Linux ... 3.2.0-27-generic #43-Ubuntu SMP Fri Jul 6 14:25:57 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I want to migrate a Web CMS system, called Contao. It's not my first migration, but my first migration having connection issues with mysql. Migration went successfully, I have the same Contao version running (it's more or less just copy / paste). For the database behind, I did: apt-get install mysql-server phpmyadmin I set a root password and added a user for the CMS which has enough rights on its own database (and only its database) for doing the stuff it has to do. Data import via phpmyadmin worked just fine. I can access the backend of the CMS (which needs to deal with the database already). If I try to access the frontend now, I get the following error: Fatal error: Uncaught exception Exception with message Query error: Lost connection to MySQL server during query (<query statement here, nothing special, just a select>) thrown in /var/www/system/libraries/Database.php on line 686 (Keep in mind: I can access mysql with phpmyadmin and through the backend, working like a charme, it's just the frontend call causing errors). If I spam F5 in my browser I can sometimes even kill the mysql deamon. If I run # mysqld --log-warnings=2 I get this: ... 120921 7:57:31 [Note] mysqld: ready for connections. Version: '5.5.24-0ubuntu0.12.04.1' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 05:57:37 UTC - mysqld got signal 4 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=151 thread_count=1 connection_count=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 346679 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x7f1485db3b20 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7f1480041e60 thread_stack 0x30000 mysqld(my_print_stacktrace+0x29)[0x7f1483b96459] mysqld(handle_fatal_signal+0x483)[0x7f1483a5c1d3] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfcb0)[0x7f1482797cb0] /lib/x86_64-linux-gnu/libm.so.6(+0x42e11)[0x7f14821cae11] mysqld(_ZN10SQL_SELECT17test_quick_selectEP3THD6BitmapILj64EEyyb+0x1368)[0x7f1483b26cb8] mysqld(+0x33116a)[0x7f148397916a] mysqld(_ZN4JOIN8optimizeEv+0x558)[0x7f148397d3e8] mysqld(_Z12mysql_selectP3THDPPP4ItemP10TABLE_LISTjR4ListIS1_ES2_jP8st_orderSB_S2_SB_yP13select_resultP18st_select_lex_unitP13st_select_lex+0xdd)[0x7f148397fd7d] mysqld(_Z13handle_selectP3THDP3LEXP13select_resultm+0x17c)[0x7f1483985d2c] mysqld(+0x2f4524)[0x7f148393c524] mysqld(_Z21mysql_execute_commandP3THD+0x293e)[0x7f14839451de] mysqld(_Z11mysql_parseP3THDPcjP12Parser_state+0x10f)[0x7f1483948bef] mysqld(_Z16dispatch_command19enum_server_commandP3THDPcj+0x1365)[0x7f148394a025] mysqld(_Z24do_handle_one_connectionP3THD+0x1bd)[0x7f14839ec7cd] mysqld(handle_one_connection+0x50)[0x7f14839ec830] /lib/x86_64-linux-gnu/libpthread.so.0(+0x7e9a)[0x7f148278fe9a] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7f1481eba4bd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (7f1464004b60): is an invalid pointer Connection ID (thread ID): 1 Status: NOT_KILLED From /var/log/syslog: Sep 21 07:17:01 s16477249 CRON[23855]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Sep 21 07:18:51 s16477249 kernel: [231923.349159] type=1400 audit(1348204731.333:70): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=23946 comm="apparmor_parser" Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[23990]: Upgrading MySQL tables if necessary. Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[23993]: /usr/bin/mysql_upgrade: the '--basedir' option is always ignored Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[23993]: Looking for 'mysql' as: /usr/bin/mysql Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[23993]: Looking for 'mysqlcheck' as: /usr/bin/mysqlcheck Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[23993]: This installation of MySQL is already upgraded to 5.5.24, use --force if you still need to run mysql_upgrade Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[24004]: Checking for insecure root accounts. Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[24009]: Triggering myisam-recover for all MyISAM tables I'm using MyISAM tables all over, nothing with InnoDB there. Starting / stopping mysql is done via sudo service mysql start sudo service mysql stop After using google a little bit, I experimented a little bit with timeouts, correct socket path in the /etc/mysql/my.cnf file, but nothing helped. There are some old (from 2008) Gentoo bugs, where re-compiling just solved the problem. I already re-installed mysql via: sudo apt-get remove mysql-server mysql-common sudo apt-get autoremove sudo apt-get install mysql-server without any results. This is the first time I'm running into this problem, and I'm not very experienced with this kind of mysql 'administration'. So mainly, I want to know if anyone of you could help me out please :) Is it a mysql bug? Is something broken in the Ubuntu repositories? Is this one of those misterious 'use-tcp-connection-instead-of-socket-stuff-because-there-are-problems-on-virtualized-machines-with-sockets'-problem? Or am I completly on the wrong way and I just miss-configured something? Remember, phpmyadmin and access to the backend (which uses the database, too) is just fine. Maybe something with Apache? What can I do? Any help is appreciated, so thanks in advance :)

    Read the article

  • New Product: Oracle Java ME Embedded 3.2 – Small, Smart, Connected

    - by terrencebarr
    The Internet of Things (IoT) is coming. And, with todays launch of the Oracle Java ME Embedded 3.2 product, Java is going to play an even greater role in it. Java in the Internet of Things By all accounts, intelligent embedded devices are penetrating the world around us – driving industrial processes, monitoring environmental conditions, providing better health care, analyzing and processing data, and much more. And these devices are becoming increasingly connected, adding another dimension of utility. Welcome to the Internet of Things. As I blogged yesterday, this is a huge opportunity for the Java technology and ecosystem. To enable and utilize these billions of devices effectively you need a programming model, tools, and protocols which provide a feature-rich, consistent, scalable, manageable, and interoperable platform.  Java technology is ideally suited to address these technical and business problems, enabling you eliminate many of the typical challenges in designing embedded solutions. By using Java you can focus on building smarter, more valuable embedded solutions faster. To wit, Java technology is already powering around 10 billion devices worldwide. Delivering on this vision and accelerating the growth of embedded Java solutions, Oracle is today announcing a brand-new product: Oracle Java Micro Edition (ME) Embedded 3.2, accompanied by an update release of the Java ME Software Development Kit (SDK) to version 3.2. What is Oracle Java ME Embedded 3.2? Oracle Java ME Embedded 3.2 is a complete Java runtime client, optimized for ARM architecture connected microcontrollers and other resource-constrained systems. The product provides dedicated embedded functionality and is targeted for low-power, limited memory devices requiring support for a range of network services and I/O interfaces.  What features and APIs are provided by Oracle Java ME Embedded 3.2? Oracle Java ME Embedded 3.2 is a Java ME runtime based on CLDC 1.1 (JSR-139) and IMP-NG (JSR-228). The runtime and virtual machine (VM) are highly optimized for embedded use. Also included in the product are the following optional JSRs and Oracle APIs: File I/O API’s (JSR-75)  Wireless Messaging API’s (JSR-120) Web Services (JSR-172) Security and Trust Services subset (JSR-177) Location API’s (JSR-179) XML API’s (JSR-280)  Device Access API Application Management System (AMS) API AccessPoint API Logging API Additional embedded features are: Remote application management system Support for continuous 24×7 operation Application monitoring, auto-start, and system recovery Application access to peripheral interfaces such as GPIO, I2C, SPIO, memory mapped I/O Application level logging framework, including option for remote logging Headless on-device debugging – source level Java application debugging over IP Connection Remote configuration of the Java VM What type of platforms are targeted by Oracle Java ME 3.2 Embedded? The product is designed for embedded, always-on, resource-constrained, headless (no graphics/no UI), connected (wired or wireless) devices with a variety of peripheral I/O.  The high-level system requirements are as follows: System based on ARM architecture SOCs Memory footprint (approximate) from 130 KB RAM/350KB ROM (for a minimal, customized configuration) to 700 KB RAM/1500 KB ROM (for the full, standard configuration)  Very simple embedded kernel, or a more capable embedded OS/RTOS At least one type of network connection (wired or wireless) The initial release of the product is delivered as a device emulation environment for x86/Windows desktop computers, integrated with the Java ME SDK 3.2. A standard binary of Oracle Java ME Embedded 3.2 for ARM KEIL development boards based on ARM Cortex M-3/4 (KEIL MCBSTM32F200 using ST Micro SOC STM32F207IG) will soon be available for download from the Oracle Technology Network (OTN).  What types of applications can I develop with Oracle Java ME Embedded 3.2? The Oracle Java ME Embedded 3.2 product is a full-featured embedded Java runtime supporting applications based on the IMP-NG application model, which is derived from the well-known MIDP 2 application model. The runtime supports execution of multiple concurrent applications, remote application management, versatile connectivity, and a rich set of APIs and features relevant for embedded use cases, including the ability to interact with peripheral I/O directly from Java applications. This rich feature set, coupled with familiar and best-in class software development tools, allows developers to quickly build and deploy sophisticated embedded solutions for a wide range of use cases. Target markets well supported by Oracle Java ME Embedded 3.2 include wireless modules for M2M, industrial and building control, smart grid infrastructure, home automation, and environmental sensors and tracking. What tools are available for embedded application development for Oracle Java ME Embedded 3.2? Along with the release of Oracle Java ME Embedded 3.2, Oracle is also making available an updated version of the Java ME Software Development Kit (SDK), together with plug-ins for the NetBeans and Eclipse IDEs, to deliver a complete development environment for embedded application development.  OK – sounds great! Where can I find out more? And how do I get started? There is a complete set of information, data sheet, API documentation, “Getting Started Guide”, FAQ, and download links available: For an overview of Oracle Embeddable Java, see here. For the Oracle Java ME Embedded 3.2 press release, see here. For the Oracle Java ME Embedded 3.2 data sheet, see here. For the Oracle Java ME Embedded 3.2 landing page, see here. For the Oracle Java ME Embedded 3.2 documentation page, including a “Getting Started Guide” and FAQ, see here. For the Oracle Java ME SDK 3.2 landing and download page, see here. Finally, to ask more questions, please see the OTN “Java ME Embedded” forum To get started, grab the “Getting Started Guide” and download the Java ME SDK 3.2, which includes the Oracle Java ME Embedded 3.2 device emulation.  Can I learn more about Oracle Java ME Embedded 3.2 at JavaOne and/or Java Embedded @ JavaOne? Glad you asked Both conferences, JavaOne and Java Embedded @ JavaOne, will feature a host of content and information around the new Oracle Java ME Embedded 3.2 product, from technical and business sessions, to hands-on tutorials, and demos. Stay tuned, I will post details shortly. Cheers, – Terrence Filed under: Mobile & Embedded Tagged: "Oracle Java ME Embedded", Connected, embedded, Embedded Java, Java Embedded @ JavaOne, JavaOne, Smart

    Read the article

  • Three Steps to Becoming an Expert Oracle Linux System Administrator

    - by Antoinette O'Sullivan
    Oracle provides a complete system administration curriculum to take you from your initial experience of Unix to being an expert Oracle Linux system administrator. You can take these live instructor-led courses from your own desk through live-virtual events or by traveling to an education center through in-class events. Step 1: Unix and Linux Essentials This 3-day course is designed for users and administrators who are new to Oracle Linux. It will help you develop the basic UNIX skills needed to interact comfortably and confidently with the operating system. Below is a sample of the in-class events already on the schedule.  Location  Date  Delivery Language  Vivoorde, Belgium  28 October 2013  English  Berlin, Germany  15 July 2013  German  Utrecht, Netherlands  19 August 2013  Dutch  Bucarest, Romania  12 August 2013  Romanian  Ankara, Turkey  6 January 2013  Turkish  Nairobi, Kenya  5 August 2013  English  Kaduna, Nigeria  15 July 2013  English   Woodmead, South Africa  15 July 2013  English   Jakarta, Indonesia  23 September 2013  English  Petaling Jaya, Malaysia  22 July 2013  English  Makati City, Philippines  3 July 2013  English  Bangkok, Thailand  20 November 2013  English  Auckland, New Zealand  5 August 2013  English  Melbourne, Australia  12 August 2013  English  Ottawa, Montreal, Toronto, Canada  3 September 2013  English  San Francisco and San Jose, CA, United States  15 July 2013  English  Reston, VA, United States  7 August 2013  English  Edison, NJ, and King of Prussia, PA, United States  3 September 2013  English  Denver, CO, United States  25 September 2013  English  Cambridge, MA, and Roseville MN, United States  6 November 2013  English  Phoenix, AZ, and Sacramento, CA, United States  25 November 2013  English Step 2: Oracle Linux System Administration Through this 5-day course, become a knowledgeable Oracle Linux system administrator, learning how to install Oracle Linux and the benefits of Oracle's Unbreakable Enterprise Kernel and Ksplice. Below is a sample of in-class events already on the schedule.  Location  Date  Delivery Language  Vienna, Austria  1 July 2013  German  Vivoorde, Belgium  18 November 2013  English  Zagreb, Croatia  16 September 2013  Croatian  London, England  3 September 2013  English  Manchester, England  9 September 2013  English  Paris, France  29 July 2013  French  Budapest, Hungary  8 July 2013  Hungarian  Utrecht, Netherland  2 September 2013  Dutch  Warsaw, Poland  15 July 2013  Polish  Bucharest, Romania  2 December 2013  Romanian  Ankara, Turkey  7 October 2013  Turkish  Istanbul, Turkey  9 September 2013  Turkish  Nairobi, Kenya  12 August 2013  English  Petaling Jaya, Malaysia  29 July 2013  English  Kuala Lumpur, Malaysia  21 October 2013  English  Makati City, Philippines  8 July 2013  English  Singapore  24 July 2013  English  Bangkok, Thailand  26 July 2013  English  Canberra, Australia  19 August 2013  English  Melbourne, Australia  16 September 2013  English   Sydney, Australia 19 August 2013   English   Mississauga, Canada  26 August 2013  English  Ottawa, Canada  4 November 2013  English  Phoenix, AZ, United States  7 October 2013  English  Belmont, CA, United States  23 September 2013  English  Irvine, CA, United States  18 November 2013  English  Sacramento, CA, United States  19 August 2013  English  San Francisco, CA, United States  15 July 2013  English  Denver, CO, United States  19 August 2013  English  Schaumburg, IL, United States  26 August 2013  English  Indianapolis, IN, United States  14 October 2013  English  Columbia, MD, United States  30 September 2013  English  Roseville, MN, United States  19 August 2013  English  St Louis, MO, United States  7 October 2013  English  Edison, NJ, United States  28 October 2013  English  Beaverton, OR, United States  12 August 2013  English  Pittsburg, PA, United States 9 December 2013   English  Reston, VA, United States 12 August 2013   English  Brookfield, WI, United States 30 September 2013   English  Sao Paolo, Brazil 15 July 2013   Brazilian Portugese Step 3: Oracle Linux Advanced System Administration This new 3-day course is ideal for administrators who want to learn about managing resources and file systems while developing troubleshooting and advanced storage administration skills. You will learn about Linux Containers, Cgroups, btrfs, DTrace and more. Below is a sample of in-class events already on the schedule.  Location  Date  Delivery Language  Melbourne, Australia  9 October 2013  English  Roseville, MN, United States  3 September 2013  English To register for or learn more about these courses, go to http://oracle.com/education/linux. Watch this video to learn more about Oracle's operating system training.

    Read the article

  • L2TP connection fails!

    - by a.toraby
    I've installed l2tp-ipsec-vpn but when I try to connect to the vpn server I get error 500. Here are the logs: Jun 17 12:54:37.449 ipsec_setup: Stopping Openswan IPsec... Jun 17 12:54:38.858 Stopping xl2tpd: xl2tpd. Jun 17 12:54:38.859 xl2tpd[1511]: death_handler: Fatal signal 15 received Jun 17 12:54:38.872 ipsec_setup: Starting Openswan IPsec U2.6.37/K3.2.0-23-generic... Jun 17 12:54:39.027 ipsec__plutorun: Starting Pluto subsystem... Jun 17 12:54:39.033 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d Jun 17 12:54:39.037 recvref[30]: Protocol not available Jun 17 12:54:39.038 xl2tpd[2442]: This binary does not support kernel L2TP. Jun 17 12:54:39.038 xl2tpd[2444]: xl2tpd version xl2tpd-1.3.1 started on atp-ThinkPad-SL410 PID:2444 Jun 17 12:54:39.038 xl2tpd[2444]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. Jun 17 12:54:39.038 xl2tpd[2444]: Forked by Scott Balmos and David Stipp, (C) 2001 Jun 17 12:54:39.038 xl2tpd[2444]: Inherited by Jeff McAdams, (C) 2002 Jun 17 12:54:39.039 xl2tpd[2444]: Forked again by Xelerance (www.xelerance.com) (C) 2006 Jun 17 12:54:39.039 xl2tpd[2444]: Listening on IP address 0.0.0.0, port 1701 Jun 17 12:54:39.040 Starting xl2tpd: xl2tpd. Jun 17 12:54:39.062 ipsec__plutorun: 002 added connection description "L2TP" Jun 17 12:55:30.753 104 "L2TP" #1: STATE_MAIN_I1: initiate Jun 17 12:55:30.754 010 "L2TP" #1: STATE_MAIN_I1: retransmission; will wait 20s for response Jun 17 12:55:30.754 010 "L2TP" #1: STATE_MAIN_I1: retransmission; will wait 40s for response Jun 17 12:55:30.754 003 "L2TP" #1: ignoring Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000008] Jun 17 12:55:30.754 003 "L2TP" #1: received Vendor ID payload [RFC 3947] method set to=109 Jun 17 12:55:30.754 003 "L2TP" #1: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 109 Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [FRAGMENTATION] Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [MS-Negotiation Discovery Capable] Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [IKE CGA version 1] Jun 17 12:55:30.755 106 "L2TP" #1: STATE_MAIN_I2: sent MI2, expecting MR2 Jun 17 12:55:30.755 010 "L2TP" #1: STATE_MAIN_I2: retransmission; will wait 20s for response Jun 17 12:55:30.755 003 "L2TP" #1: NAT-Traversal: Result using RFC 3947 (NAT-Traversal): i am NATed Jun 17 12:55:30.755 108 "L2TP" #1: STATE_MAIN_I3: sent MI3, expecting MR3 Jun 17 12:55:30.756 004 "L2TP" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024} Jun 17 12:55:30.756 117 "L2TP" #2: STATE_QUICK_I1: initiate Jun 17 12:55:30.756 010 "L2TP" #2: STATE_QUICK_I1: retransmission; will wait 20s for response Jun 17 12:55:30.756 003 "L2TP" #2: ignoring informational payload, type IPSEC_RESPONDER_LIFETIME msgid=6b03ff69 Jun 17 12:55:30.756 003 "L2TP" #2: NAT-Traversal: received 2 NAT-OA. ignored because peer is not NATed Jun 17 12:55:30.756 003 "L2TP" #2: our client subnet returned doesn't match my proposal - us:192.168.1.3/32 vs them:109.162.174.235/32 Jun 17 12:55:30.757 003 "L2TP" #2: Allowing questionable proposal anyway [ALLOW_MICROSOFT_BAD_PROPOSAL] Jun 17 12:55:30.757 004 "L2TP" #2: STATE_QUICK_I2: sent QI2, IPsec SA established transport mode {ESP=>0x23af21f8 <0xdb4a87b6 xfrm=AES_128-HMAC_SHA1 NATOA=none NATD=none DPD=none} Jun 17 12:55:31.759 xl2tpd[2444]: Connecting to host x.x.x.x, port 1701 Jun 17 12:55:32.021 xl2tpd[2444]: Connection established to x.x.x.x, 1701. Local: 4720, Remote: 200 (ref=0/0). Jun 17 12:55:32.023 xl2tpd[2444]: Calling on tunnel 4720 Jun 17 12:55:32.454 xl2tpd[2444]: Call established with x.x.x.x, Local: 9667, Remote: 3, Serial: 1 (ref=0/0) Jun 17 12:55:32.456 xl2tpd[2444]: start_pppd: I'm running: Jun 17 12:55:32.456 xl2tpd[2444]: "/usr/sbin/pppd" Jun 17 12:55:32.457 xl2tpd[2444]: "passive" Jun 17 12:55:32.458 xl2tpd[2444]: "nodetach" Jun 17 12:55:32.458 xl2tpd[2444]: ":" Jun 17 12:55:32.459 xl2tpd[2444]: "file" Jun 17 12:55:32.459 xl2tpd[2444]: "/etc/ppp/L2TP.options.xl2tpd" Jun 17 12:55:32.460 xl2tpd[2444]: "ipparam" Jun 17 12:55:32.461 xl2tpd[2444]: "x.x.x.x" Jun 17 12:55:32.462 xl2tpd[2444]: "/dev/pts/1" Jun 17 12:55:32.583 pppd[2711]: Plugin passprompt.so loaded. Jun 17 12:55:32.583 pppd[2711]: pppd 2.4.5 started by root, uid 0 Jun 17 12:55:32.619 pppd[2711]: Using interface ppp0 Jun 17 12:55:32.620 pppd[2711]: Connect: ppp0 <--> /dev/pts/1 Jun 17 12:55:33.693 pppd[2711]: /usr/bin/L2tpIPsecVpn exited with code 0 Jun 17 12:55:34.454 [ERROR 404] Authentication failed: closing connection to 'L2TP' Jun 17 12:55:34.456 pppd[2711]: MS-CHAP authentication failed: E=691 Authentication failure Jun 17 12:55:34.457 pppd[2711]: CHAP authentication failed Jun 17 12:55:34.461 Stopping xl2tpd: xl2tpd. Jun 17 12:55:34.462 xl2tpd[2444]: death_handler: Fatal signal 15 received Jun 17 12:55:34.463 pppd[2711]: Modem hangup Jun 17 12:55:34.463 pppd[2711]: Connection terminated. Jun 17 12:55:34.474 ipsec_setup: Stopping Openswan IPsec... Jun 17 12:55:34.482 pppd[2711]: Exit. Jun 17 12:55:35.587 ipsec_setup: ERROR: Module xfrm4_mode_transport is in use Jun 17 12:55:35.665 ipsec_setup: ERROR: Module esp4 is in use I had this problem by ubuntu 11.10 though I can easily connect to the server from windows. I use ubuntu 12.0 64bit

    Read the article

  • ca-certificates-java fails when trying to install openjdk-6-jre

    - by Jonas
    I use a VPS with Ubuntu Server 10.10 x64. I want to use Java and run the command sudo apt-get install openjdk-6-jre but it fails because the installation encounted errors while processing ca-certificates-java. I have tried to install the failed package with: sudo apt-get install ca-certificates-java How can I solve this? I have run sudo apt-get update and sudo apt-get upgrade but I get the same errors after that. I have also installed Ubuntu Server x64 on a VirtualBox, but the two Ubuntu Server 10.10 has different kernel versions (2.6.35 on VirtualBox and 2.6.18 on my VPS). And on VirtualBox I can install Jetty without any problems. The VPS is a fresh install of Ubuntu Server 10.10 x64, the first command I was running was sudo apt-get install openjdk-6-jre. When I run sudo apt-get install ca-certificates-java I get this message: Reading package lists... Done Building dependency tree Reading state information... Done ca-certificates-java is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Do you want to continue [Y/n]? Here I press Y then I get this message: Setting up ca-certificates-java (20100412) ... creating /etc/ssl/certs/java/cacerts... error adding brasil.gov.br/brasil.gov.br.crt error adding cacert.org/cacert.org.crt error adding debconf.org/ca.crt error adding gouv.fr/cert_igca_dsa.crt error adding gouv.fr/cert_igca_rsa.crt error adding mozilla/ABAecom_=sub.__Am._Bankers_Assn.=_Root_CA.crt error adding mozilla/AOL_Time_Warner_Root_Certification_Authority_1.crt error adding mozilla/AOL_Time_Warner_Root_Certification_Authority_2.crt error adding mozilla/AddTrust_External_Root.crt error adding mozilla/AddTrust_Low-Value_Services_Root.crt error adding mozilla/AddTrust_Public_Services_Root.crt error adding mozilla/AddTrust_Qualified_Certificates_Root.crt error adding mozilla/America_Online_Root_Certification_Authority_1.crt error adding mozilla/America_Online_Root_Certification_Authority_2.crt error adding mozilla/Baltimore_CyberTrust_Root.crt error adding mozilla/COMODO_Certification_Authority.crt error adding mozilla/COMODO_ECC_Certification_Authority.crt error adding mozilla/Camerfirma_Chambers_of_Commerce_Root.crt error adding mozilla/Camerfirma_Global_Chambersign_Root.crt error adding mozilla/Certplus_Class_2_Primary_CA.crt error adding mozilla/Certum_Root_CA.crt error adding mozilla/Comodo_AAA_Services_root.crt error adding mozilla/Comodo_Secure_Services_root.crt error adding mozilla/Comodo_Trusted_Services_root.crt error adding mozilla/DST_ACES_CA_X6.crt error adding mozilla/DST_Root_CA_X3.crt error adding mozilla/DigiCert_Assured_ID_Root_CA.crt error adding mozilla/DigiCert_Global_Root_CA.crt error adding mozilla/DigiCert_High_Assurance_EV_Root_CA.crt error adding mozilla/DigiNotar_Root_CA.crt error adding mozilla/Digital_Signature_Trust_Co._Global_CA_1.crt error adding mozilla/Digital_Signature_Trust_Co._Global_CA_2.crt error adding mozilla/Digital_Signature_Trust_Co._Global_CA_3.crt error adding mozilla/Digital_Signature_Trust_Co._Global_CA_4.crt error adding mozilla/Entrust.net_Global_Secure_Personal_CA.crt error adding mozilla/Entrust.net_Global_Secure_Server_CA.crt error adding mozilla/Entrust.net_Premium_2048_Secure_Server_CA.crt error adding mozilla/Entrust.net_Secure_Personal_CA.crt error adding mozilla/Entrust.net_Secure_Server_CA.crt error adding mozilla/Entrust_Root_Certification_Authority.crt error adding mozilla/Equifax_Secure_CA.crt error adding mozilla/Equifax_Secure_Global_eBusiness_CA.crt error adding mozilla/Equifax_Secure_eBusiness_CA_1.crt error adding mozilla/Equifax_Secure_eBusiness_CA_2.crt error adding mozilla/Firmaprofesional_Root_CA.crt error adding mozilla/GTE_CyberTrust_Global_Root.crt error adding mozilla/GTE_CyberTrust_Root_CA.crt error adding mozilla/GeoTrust_Global_CA.crt error adding mozilla/GeoTrust_Global_CA_2.crt error adding mozilla/GeoTrust_Primary_Certification_Authority.crt error adding mozilla/GeoTrust_Universal_CA.crt error adding mozilla/GeoTrust_Universal_CA_2.crt error adding mozilla/GlobalSign_Root_CA.crt error adding mozilla/GlobalSign_Root_CA_-_R2.crt error adding mozilla/Go_Daddy_Class_2_CA.crt error adding mozilla/IPS_CLASE1_root.crt error adding mozilla/IPS_CLASE3_root.crt error adding mozilla/IPS_CLASEA1_root.crt error adding mozilla/IPS_CLASEA3_root.crt error adding mozilla/IPS_Chained_CAs_root.crt error adding mozilla/IPS_Servidores_root.crt error adding mozilla/IPS_Timestamping_root.crt error adding mozilla/NetLock_Business_=Class_B=_Root.crt error adding mozilla/NetLock_Express_=Class_C=_Root.crt error adding mozilla/NetLock_Notary_=Class_A=_Root.crt error adding mozilla/NetLock_Qualified_=Class_QA=_Root.crt error adding mozilla/Network_Solutions_Certificate_Authority.crt error adding mozilla/QuoVadis_Root_CA.crt error adding mozilla/QuoVadis_Root_CA_2.crt error adding mozilla/QuoVadis_Root_CA_3.crt error adding mozilla/RSA_Root_Certificate_1.crt error adding mozilla/RSA_Security_1024_v3.crt error adding mozilla/RSA_Security_2048_v3.crt error adding mozilla/SecureTrust_CA.crt error adding mozilla/Secure_Global_CA.crt error adding mozilla/Security_Communication_Root_CA.crt error adding mozilla/Sonera_Class_1_Root_CA.crt error adding mozilla/Sonera_Class_2_Root_CA.crt error adding mozilla/Staat_der_Nederlanden_Root_CA.crt error adding mozilla/Starfield_Class_2_CA.crt error adding mozilla/StartCom_Certification_Authority.crt error adding mozilla/StartCom_Ltd..crt error adding mozilla/SwissSign_Gold_CA_-_G2.crt error adding mozilla/SwissSign_Platinum_CA_-_G2.crt error adding mozilla/SwissSign_Silver_CA_-_G2.crt error adding mozilla/Swisscom_Root_CA_1.crt error adding mozilla/TC_TrustCenter__Germany__Class_2_CA.crt error adding mozilla/TC_TrustCenter__Germany__Class_3_CA.crt error adding mozilla/TDC_Internet_Root_CA.crt error adding mozilla/TDC_OCES_Root_CA.crt error adding mozilla/TURKTRUST_Certificate_Services_Provider_Root_1.crt error adding mozilla/TURKTRUST_Certificate_Services_Provider_Root_2.crt error adding mozilla/Taiwan_GRCA.crt error adding mozilla/Thawte_Personal_Basic_CA.crt error adding mozilla/Thawte_Personal_Freemail_CA.crt error adding mozilla/Thawte_Personal_Premium_CA.crt error adding mozilla/Thawte_Premium_Server_CA.crt error adding mozilla/Thawte_Server_CA.crt error adding mozilla/Thawte_Time_Stamping_CA.crt error adding mozilla/UTN-USER_First-Network_Applications.crt error adding mozilla/UTN_DATACorp_SGC_Root_CA.crt error adding mozilla/UTN_USERFirst_Email_Root_CA.crt error adding mozilla/UTN_USERFirst_Hardware_Root_CA.crt error adding mozilla/ValiCert_Class_1_VA.crt error adding mozilla/ValiCert_Class_2_VA.crt error adding mozilla/VeriSign_Class_3_Public_Primary_Certification_Authority_-_G5.crt error adding mozilla/Verisign_Class_1_Public_Primary_Certification_Authority.crt error adding mozilla/Verisign_Class_1_Public_Primary_Certification_Authority_-_G2.crt error adding mozilla/Verisign_Class_1_Public_Primary_Certification_Authority_-_G3.crt error adding mozilla/Verisign_Class_2_Public_Primary_Certification_Authority.crt error adding mozilla/Verisign_Class_2_Public_Primary_Certification_Authority_-_G2.crt error adding mozilla/Verisign_Class_2_Public_Primary_Certification_Authority_-_G3.crt error adding mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt error adding mozilla/Verisign_Class_3_Public_Primary_Certification_Authority_-_G2.crt error adding mozilla/Verisign_Class_3_Public_Primary_Certification_Authority_-_G3.crt error adding mozilla/Verisign_Class_4_Public_Primary_Certification_Authority_-_G2.crt error adding mozilla/Verisign_Class_4_Public_Primary_Certification_Authority_-_G3.crt error adding mozilla/Verisign_RSA_Secure_Server_CA.crt error adding mozilla/Verisign_Time_Stamping_Authority_CA.crt error adding mozilla/Visa_International_Global_Root_2.crt error adding mozilla/Visa_eCommerce_Root.crt error adding mozilla/WellsSecure_Public_Root_Certificate_Authority.crt error adding mozilla/Wells_Fargo_Root_CA.crt error adding mozilla/XRamp_Global_CA_Root.crt error adding mozilla/beTRUSTed_Root_CA-Baltimore_Implementation.crt error adding mozilla/beTRUSTed_Root_CA.crt error adding mozilla/beTRUSTed_Root_CA_-_Entrust_Implementation.crt error adding mozilla/beTRUSTed_Root_CA_-_RSA_Implementation.crt error adding mozilla/thawte_Primary_Root_CA.crt error adding signet.pl/signet_ca1_pem.crt error adding signet.pl/signet_ca2_pem.crt error adding signet.pl/signet_ca3_pem.crt error adding signet.pl/signet_ocspklasa2_pem.crt error adding signet.pl/signet_ocspklasa3_pem.crt error adding signet.pl/signet_pca2_pem.crt error adding signet.pl/signet_pca3_pem.crt error adding signet.pl/signet_rootca_pem.crt error adding signet.pl/signet_tsa1_pem.crt error adding spi-inc.org/spi-ca-2003.crt error adding spi-inc.org/spi-cacert-2008.crt error adding telesec.de/deutsche-telekom-root-ca-2.crt failed (VM used: java-6-openjdk). dpkg: error processing ca-certificates-java (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: ca-certificates-java E: Sub-process /usr/bin/dpkg returned an error code (1) Update I also get a problem when running java -version: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. My VPS had 128MB of Memory, I changed to 256MB but got the same problem. Then I changed to 512MB and got the same problem. I found a related post on a forum: Sub-process /usr/bin/dpkg returned an error code (1) And I tried: sudo apt-get clean sudo apt-get --reinstall install openjdk-6-jre sudo dpkg --configure -a But I got the same problem, even when I'm using 512MB of Memory. Any suggestions?

    Read the article

  • ORA-4030 Troubleshooting

    - by [email protected]
    QUICKLINK: Note 399497.1 FAQ ORA-4030 Note 1088087.1 : ORA-4030 Diagnostic Tools [Video]   Have you observed an ORA-0430 error reported in your alert log? ORA-4030 errors are raised when memory or resources are requested from the Operating System and the Operating System is unable to provide the memory or resources.   The arguments included with the ORA-4030 are often important to narrowing down the problem. For more specifics on the ORA-4030 error and scenarios that lead to this problem, see Note 399497.1 FAQ ORA-4030.   Looking for the best way to diagnose? There are several available diagnostic tools (error tracing, 11g Diagnosibility, OCM, Process Memory Guides, RDA, OSW, diagnostic scripts) that collectively can prove powerful for identifying the cause of the ORA-4030.    Error Tracing   The ORA-4030 error usually occurs on the client workstation and for this reason, a trace file and alert log entry may not have been generated on the server side.  It may be necessary to add additional tracing events to get initial diagnostics on the problem. To setup tracing to trap the ORA-4030, on the server use the following in SQLPlus: alter system set events '4030 trace name heapdump level 536870917;name errorstack level 3';Once the error reoccurs with the event set, you can turn off  tracing using the following command in SQLPlus:alter system set events '4030 trace name context off; name context off';NOTE:   See more diagnostics information to collect in Note 399497.1  11g DiagnosibilityStarting with Oracle Database 11g Release 1, the Diagnosability infrastructure was introduced which places traces and core files into a location controlled by the DIAGNOSTIC_DEST initialization parameter when an incident, such as an ORA-4030 occurs.  For earlier versions, the trace file will be written to either USER_DUMP_DEST (if the error was caught in a user process) or BACKGROUND_DUMP_DEST (if the error was caught in a background process like PMON or SMON). The trace file may contain vital information about what led to the error condition.    Note 443529.1 11g Quick Steps to Package and Send Critical Error Diagnostic Informationto Support[Video]  Oracle Configuration Manager (OCM) Oracle Configuration Manager (OCM) works with My Oracle Support to enable proactive support capability that helps you organize, collect and manage your Oracle configurations. Oracle Configuration Manager Quick Start Guide Note 548815.1: My Oracle Support Configuration Management FAQ Note 250434.1: BULLETIN: Learn More About My Oracle Support Configuration Manager    General Process Memory Guides   An ORA-4030 indicates a limit has been reached with respect to the Oracle process private memory allocation.    Each Operating System will handle memory allocations with Oracle slightly differently. Solaris     Note 163763.1Linux       Note 341782.1IBM AIX   Notes 166491.1 and 123754.1HP           Note 166490.1Windows Note 225349.1, Note 373602.1, Note 231159.1, Note 269495.1, Note 762031.1Generic    Note 169706.1   RDAThe RDA report will show more detailed information about the database and Server Configuration. Note 414966.1 RDA Documentation Index Download RDA -- refer to Note 314422.1 Remote Diagnostic Agent (RDA) 4 - Getting Started OS Watcher (OSW)This tool is designed to gather Operating System side statistics to compare with the findings from the database.  This is a key tool in cases where memory usage is higher than expected on the server while not experiencing ORA-4030 errors currently. Reference more details on setup and usage in Note 301137.1 OS Watcher User Guide Diagnostic Scripts   Refer to Note 1088087.1 : ORA-4030 Diagnostic Tools [Video] Common Causes/Solutions The ORA-4030 can occur for a variety of reasons.  Some common causes are:   * OS Memory limit reached such as physical memory and/or swap/virtual paging.   For instance, IBM AIX can experience ORA-4030 issues related to swap scenarios.  See Note 740603.1 10.2.0.4 not using large pages on AIX for more on that problem. Also reference Note 188149.1 for pointers on 10g and stack size issues.* OS limits reached (kernel or user shell limits) that limit overall, user level or process level memory * OS limit on PGA memory size due to SGA attach address           Reference: Note 1028623.6 SOLARIS How to Relocate the SGA* Oracle internal limit on functionality like PL/SQL varrays or bulk collections. ORA-4030 errors will include arguments like "pl/sql vc2" "pmucalm coll" "pmuccst: adt/re".  See Coding Pointers for pointers on application design to get around these issues* Application design causing limits to be reached* Bug - space leaks, heap leaks   ***For reference to the content in this blog, refer to Note.1088267.1 Master Note for Diagnosing ORA-4030

    Read the article

  • Oracle Database 12c Spatial: Vector Performance Acceleration

    - by Okcan Yasin Saygili-Oracle
    Most business information has a location component, such as customer addresses, sales territories and physical assets. Businesses can take advantage of their geographic information by incorporating location analysis and intelligence into their information systems. This allows organizations to make better decisions, respond to customers more effectively, and reduce operational costs – increasing ROI and creating competitive advantage. Oracle Database, the industry’s most advanced database,  includes native location capabilities, fully integrated in the kernel, for fast, scalable, reliable and secure spatial and massive graph applications. It is a foundation for deploying enterprise-wide spatial information systems and locationenabled business applications. Developers can extend existing Oracle-based tools and applications, since they can easily incorporate location information directly in their applications, workflows, and services. Spatial Features The geospatial data features of Oracle Spatial and Graph option support complex geographic information systems (GIS) applications, enterprise applications and location services applications. Oracle Spatial and Graph option extends the spatial query and analysis features included in every edition of Oracle Database with the Oracle Locator feature, and provides a robust foundation for applications that require advanced spatial analysis and processing in the Oracle Database. It supports all major spatial data types and models, addressing challenging business-critical requirements from various industries, including transportation, utilities, energy, public sector, defense and commercial location intelligence. Network Data Model Graph Features The Network Data Model graph explicitly stores and maintains a persistent data model withnetwork connectivity and provides network analysis capability such as shortest path, nearest neighbors, within cost and reachability. It loads partitioned networks into memory on demand, overcomingthe limitations of in-memory analysis. Partitioning massive networks into manageable sub-networkssimplifies the network analysis. RDF Semantic Graph Features RDF Semantic Graph has native support for World Wide Web Consortium standards. It has open, scalable, and secure features for storing RDF/OWL ontologies anddata; native inference with OWL 2, SKOS and user-defined rules; and querying RDF/OWL data withSPARQL 1.1, Java APIs, and SPARQLgraph patterns in SQL. Video: Oracle Spatial and Graph Overview Oracle spatial is embeded on oracle database product. So ,we can use oracle installer (OUI).The Oracle Universal Installer (OUI) is used to install Oracle Database software. OUI is a graphical user interface utility that enables you to view the Oracle software that is installed on your machine, install new Oracle Database software, and delete Oracle software that you no longer need to use. Online Help is available to guide you through the installation process. One of the installation options is to create a database. If you select database creation, OUI automatically starts Oracle Database Configuration Assistant (DBCA) to guide you through the process of creating and configuring a database. If you do not create a database during installation, you must invoke DBCA after you have installed the software to create a database. You can also use DBCA to create additional databases. For installing Oracle Database 12c you may check the Installing Oracle Database Software and Creating a Database tutorial under the Oracle Database 12c 2-Day DBA Series.You can always check if spatial is available in your database using  "select comp_id, version, status, comp_name from dba_registry where comp_id='SDO';"   One of the most notable improvements with Oracle Spatial and Graph 12c can be seen in performance increases in vector data operations. Enabling the Spatial Vector Acceleration feature (available with the Spatial option) dramatically improves the performance of commonly used vector data operations, such as sdo_distance, sdo_aggr_union, and sdo_inside. With 12c, these operations also run more efficiently in parallel than in prior versions through the use of metadata caching. For organizations that have been facing processing limitations, these enhancements enable developers to make a small set of configuration changes and quickly realize significant performance improvements. Results include improved index performance, enhanced geometry engine performance, optimized secondary filter optimizations for Spatial operators, and improved CPU and memory utilization for many advanced vector functions. Vector performance acceleration is especially beneficial when using Oracle Exadata Database Machine and other large-scale systems. Oracle Spatial and Graph vector performance acceleration builds on general improvements available to all SDO_GEOMETRY operations in these areas: Caching of index metadata, Concurrent update mechanisms, and Optimized spatial predicate selectivity and cost functions. These optimizations enable more efficient use of: CPU, Memory, and Partitioning Resulting in substantial query performance improvements.UsageTo accelerate the performance of spatial operators, it is recommended that you set the SPATIAL_VECTOR_ACCELERATION database system parameter to the value TRUE. (This parameter is authorized for use only by licensed Oracle Spatial users, and its default value is FALSE.) You can set this parameter for the whole system or for a single session. To set the value for the whole system, do either of the following:Enter the following statement from a suitably privileged account:   ALTER SYSTEM SET SPATIAL_VECTOR_ACCELERATION = TRUE;Add the following to the database initialization file (xxxinit.ora):   SPATIAL_VECTOR_ACCELERATION = TRUE;To set the value for the current session, enter the following statement from a suitably privileged account:   ALTER SESSION SET SPATIAL_VECTOR_ACCELERATION = TRUE; Checkout the complete list of new features on Oracle.com @ http://www.oracle.com/technetwork/database/options/spatialandgraph/overview/index.html Spatial and Graph Data Sheet (PDF) Spatial and Graph White Paper (PDF)

    Read the article

  • CLR via C# 3rd Edition is out

    - by Abhijeet Patel
    Time for some book news update. CLR via C#, 3rd Edition seems to have been out for a little while now. The book was released in early Feb this year, and needless to say my copy is on it’s way. I can barely wait to dig in and chew on the goodies that one of the best technical authors and software professionals I respect has in store. The 2nd edition of the book was an absolute treat and this edition promises to be no less. Here is a brief description of what’s new and updated from the 2nd edition. Part I – CLR Basics Chapter 1-The CLR’s Execution Model Added about discussion about C#’s /optimize and /debug switches and how they relate to each other. Chapter 2-Building, Packaging, Deploying, and Administering Applications and Types Improved discussion about Win32 manifest information and version resource information. Chapter 3-Shared Assemblies and Strongly Named Assemblies Added discussion of TypeForwardedToAttribute and TypeForwardedFromAttribute. Part II – Designing Types Chapter 4-Type Fundamentals No new topics. Chapter 5-Primitive, Reference, and Value Types Enhanced discussion of checked and unchecked code and added discussion of new BigInteger type. Also added discussion of C# 4.0’s dynamic primitive type. Chapter 6-Type and Member Basics No new topics. Chapter 7-Constants and Fields No new topics. Chapter 8-Methods Added discussion of extension methods and partial methods. Chapter 9-Parameters Added discussion of optional/named parameters and implicitly-typed local variables. Chapter 10-Properties Added discussion of automatically-implemented properties, properties and the Visual Studio debugger, object and collection initializers, anonymous types, the System.Tuple type and the ExpandoObject type. Chapter 11-Events Added discussion of events and thread-safety as well as showing a cool extension method to simplify the raising of an event. Chapter 12-Generics Added discussion of delegate and interface generic type argument variance. Chapter 13-Interfaces No new topics. Part III – Essential Types Chapter 14-Chars, Strings, and Working with Text No new topics. Chapter 15-Enums Added coverage of new Enum and Type methods to access enumerated type instances. Chapter 16-Arrays Added new section on initializing array elements. Chapter 17-Delegates Added discussion of using generic delegates to avoid defining new delegate types. Also added discussion of lambda expressions. Chapter 18-Attributes No new topics. Chapter 19-Nullable Value Types Added discussion on performance. Part IV – CLR Facilities Chapter 20-Exception Handling and State Management This chapter has been completely rewritten. It is now about exception handling and state management. It includes discussions of code contracts and constrained execution regions (CERs). It also includes a new section on trade-offs between writing productive code and reliable code. Chapter 21-Automatic Memory Management Added discussion of C#’s fixed state and how it works to pin objects in the heap. Rewrote the code for weak delegates so you can use them with any class that exposes an event (the class doesn’t have to support weak delegates itself). Added discussion on the new ConditionalWeakTable class, GC Collection modes, Full GC notifications, garbage collection modes and latency modes. I also include a new sample showing how your application can receive notifications whenever Generation 0 or 2 collections occur. Chapter 22-CLR Hosting and AppDomains Added discussion of side-by-side support allowing multiple CLRs to be loaded in a single process. Added section on the performance of using MarshalByRefObject-derived types. Substantially rewrote the section on cross-AppDomain communication. Added section on AppDomain Monitoring and first chance exception notifications. Updated the section on the AppDomainManager class. Chapter 23-Assembly Loading and Reflection Added section on how to deploy a single file with dependent assemblies embedded inside it. Added section comparing reflection invoke vs bind/invoke vs bind/create delegate/invoke vs C#’s dynamic type. Chapter 24-Runtime Serialization This is a whole new chapter that was not in the 2nd Edition. Part V – Threading Chapter 25-Threading Basics Whole new chapter motivating why Windows supports threads, thread overhead, CPU trends, NUMA Architectures, the relationship between CLR threads and Windows threads, the Thread class, reasons to use threads, thread scheduling and priorities, foreground thread vs background threads. Chapter 26-Performing Compute-Bound Asynchronous Operations Whole new chapter explaining the CLR’s thread pool. This chapter covers all the new .NET 4.0 constructs including cooperative cancelation, Tasks, the aralle class, parallel language integrated query, timers, how the thread pool manages its threads, cache lines and false sharing. Chapter 27-Performing I/O-Bound Asynchronous Operations Whole new chapter explaining how Windows performs synchronous and asynchronous I/O operations. Then, I go into the CLR’s Asynchronous Programming Model, my AsyncEnumerator class, the APM and exceptions, Applications and their threading models, implementing a service asynchronously, the APM and Compute-bound operations, APM considerations, I/O request priorities, converting the APM to a Task, the event-based Asynchronous Pattern, programming model soup. Chapter 28-Primitive Thread Synchronization Constructs Whole new chapter discusses class libraries and thread safety, primitive user-mode, kernel-mode constructs, and data alignment. Chapter 29-Hybrid Thread Synchronization Constructs Whole new chapter discussion various hybrid constructs such as ManualResetEventSlim, SemaphoreSlim, CountdownEvent, Barrier, ReaderWriterLock(Slim), OneManyResourceLock, Monitor, 3 ways to solve the double-check locking technique, .NET 4.0’s Lazy and LazyInitializer classes, the condition variable pattern, .NET 4.0’s concurrent collection classes, the ReaderWriterGate and SyncGate classes.

    Read the article

  • Installing Catalyst 11.6 for an ATI HD 6970

    - by David Oliver
    Ubuntu Maverick 10.10 is displaying the desktop okay (though limited to 1600x1200) after my having installed my new HD 6970 card, so I'm now trying to install the proprietary driver (I understand the open source one requires a more recent kernel than that in Maverick). The proprietary driver under 'Additional Drivers' resulted in a black screen on boot, so I deactivated and am trying to follow the manual install instructions at the cchtml Ubuntu Maverick Installation Guide. When I try to create the .deb packages with: sh ati-driver-installer-11-6-x86.x86_64.run --buildpkg Ubuntu/maverick I get: david@skipper:~/catalyst11.6$ sh ati-driver-installer-11-6-x86.x86_64.run --buildpkg Ubuntu/maverick Created directory fglrx-install.oLN3ux Verifying archive integrity... All good. Uncompressing ATI Catalyst(TM) Proprietary Driver-8.861......................... ===================================================================== ATI Technologies Catalyst(TM) Proprietary Driver Installer/Packager ===================================================================== Generating package: Ubuntu/maverick Package build failed! Package build utility output: ./packages/Ubuntu/ati-packager.sh: 396: debclean: not found dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.64Vzxk dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . /usr/bin/fakeroot: line 176: debian/rules: Permission denied debuild: fatal error at line 1319: couldn't exec fakeroot debian/rules: dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.QEmIld dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . Can't exec "debian/rules": Permission denied at /usr/bin/debuild line 1314. debuild: fatal error at line 1313: couldn't exec debian/rules: Permission denied dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.xtY6vC dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . /usr/bin/fakeroot: line 176: debian/rules: Permission denied debuild: fatal error at line 1319: couldn't exec fakeroot debian/rules: dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.oYWICI dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Removing temporary directory: fglrx-install.oLN3ux I've installed devscripts which has debclean in it. I've tried running the command with and without sudo. I'm not experienced with installing from downloads/source, but it seems like the file debian/source isn't being set to be executable when it needs to be. If I extract only, without using the package builder command, debian/rules is 744. As to what to do next, I'm stumped. Many thanks.

    Read the article

  • Super Joybox 5 HID 0925:8884 not recognized as joystick in Ubuntu 12.04 LTS

    - by Tim Evans
    Problem: When using the "Super JoyBox 5" 4 port playstation 2 to USB adapter, the device is not recognized as a joystick. there is no js0 created, but instead another input eventX and mouseX are created in /dev/input. When using the directional buttons (up down left right) on a Playstation 1 controller attached to the device, the mouse cursor moves to the top, bottom, left, and right edges of the screen respectively. Buttons are unresponsive. The joypads attached to the device cannot be used in any games or other programs. Attempted remedies: Creating a symlink from the eventX to js0 does not solve the problem. Addl Info: joydev is loaded and running peroperly according to LSMOD. evtest can be run on the created eventX (sudo evtest /dev/input/event14 in my case) and the buttons and axes all register inputs. Here is a paste of EVTEST's diagnostic and the first couple button events. [code] sudo evtest /dev/input/event14 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x925 product 0x8884 version 0x100 Input device name: "HID 0925:8884" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 288 (BTN_TRIGGER) Event code 289 (BTN_THUMB) Event code 290 (BTN_THUMB2) Event code 291 (BTN_TOP) Event code 292 (BTN_TOP2) Event code 293 (BTN_PINKIE) Event code 294 (BTN_BASE) Event code 295 (BTN_BASE2) Event code 296 (BTN_BASE3) Event code 297 (BTN_BASE4) Event code 298 (BTN_BASE5) Event code 299 (BTN_BASE6) Event code 300 (?) Event code 301 (?) Event code 302 (?) Event code 303 (BTN_DEAD) Event code 304 (BTN_A) Event code 305 (BTN_B) Event code 306 (BTN_C) Event code 307 (BTN_X) Event code 308 (BTN_Y) Event code 309 (BTN_Z) Event code 310 (BTN_TL) Event code 311 (BTN_TR) Event code 312 (BTN_TL2) Event code 313 (BTN_TR2) Event code 314 (BTN_SELECT) Event code 315 (BTN_START) Event code 316 (BTN_MODE) Event code 317 (BTN_THUMBL) Event code 318 (BTN_THUMBR) Event code 319 (?) Event code 320 (BTN_TOOL_PEN) Event code 321 (BTN_TOOL_RUBBER) Event code 322 (BTN_TOOL_BRUSH) Event code 323 (BTN_TOOL_PENCIL) Event code 324 (BTN_TOOL_AIRBRUSH) Event code 325 (BTN_TOOL_FINGER) Event code 326 (BTN_TOOL_MOUSE) Event code 327 (BTN_TOOL_LENS) Event code 328 (?) Event code 329 (?) Event code 330 (BTN_TOUCH) Event code 331 (BTN_STYLUS) Event code 332 (BTN_STYLUS2) Event code 333 (BTN_TOOL_DOUBLETAP) Event code 334 (BTN_TOOL_TRIPLETAP) Event code 335 (BTN_TOOL_QUADTAP) Event type 3 (EV_ABS) Event code 0 (ABS_X) Value 127 Min 0 Max 255 Flat 15 Event code 1 (ABS_Y) Value 127 Min 0 Max 255 Flat 15 Event code 2 (ABS_Z) Value 127 Min 0 Max 255 Flat 15 Event code 3 (ABS_RX) Value 127 Min 0 Max 255 Flat 15 Event code 4 (ABS_RY) Value 127 Min 0 Max 255 Flat 15 Event code 5 (ABS_RZ) Value 127 Min 0 Max 255 Flat 15 Event code 6 (ABS_THROTTLE) Value 127 Min 0 Max 255 Flat 15 Event code 7 (ABS_RUDDER) Value 127 Min 0 Max 255 Flat 15 Event code 8 (ABS_WHEEL) Value 127 Min 0 Max 255 Flat 15 Event code 9 (ABS_GAS) Value 127 Min 0 Max 255 Flat 15 Event code 10 (ABS_BRAKE) Value 127 Min 0 Max 255 Flat 15 Event code 11 (?) Value 127 Min 0 Max 255 Flat 15 Event code 12 (?) Value 127 Min 0 Max 255 Flat 15 Event code 13 (?) Value 127 Min 0 Max 255 Flat 15 Event code 14 (?) Value 127 Min 0 Max 255 Flat 15 Event code 15 (?) Value 127 Min 0 Max 255 Flat 15 Event code 16 (ABS_HAT0X) Value 0 Min -1 Max 1 Event code 17 (ABS_HAT0Y) Value 0 Min -1 Max 1 Event code 18 (ABS_HAT1X) Value 0 Min -1 Max 1 Event code 19 (ABS_HAT1Y) Value 0 Min -1 Max 1 Event code 20 (ABS_HAT2X) Value 0 Min -1 Max 1 Event code 21 (ABS_HAT2Y) Value 0 Min -1 Max 1 Event code 22 (ABS_HAT3X) Value 0 Min -1 Max 1 Event code 23 (ABS_HAT3Y) Value 0 Min -1 Max 1 Event type 4 (EV_MSC) Event code 4 (MSC_SCAN) Testing ... (interrupt to exit) Event: time 1351223176.126127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223176.126130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 1 Event: time 1351223176.126166, -------------- SYN_REPORT ------------ Event: time 1351223178.238127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223178.238130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 0 Event: time 1351223178.238167, -------------- SYN_REPORT ------------ Event: time 1351223180.422127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223180.422129, type 1 (EV_KEY), code 289 (BTN_THUMB), value 1 Event: time 1351223180.422163, -------------- SYN_REPORT ------------ Event: time 1351223181.558099, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223181.558102, type 1 (EV_KEY), code 289 (BTN_THUMB), value 0 Event: time 1351223181.558137, -------------- SYN_REPORT ------------ Event: time 1351223182.486137, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223182.486140, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 1 Event: time 1351223182.486172, -------------- SYN_REPORT ------------ Event: time 1351223183.302130, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223183.302132, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 0 Event: time 1351223183.302165, -------------- SYN_REPORT ------------ Event: time 1351223184.030133, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.030136, type 1 (EV_KEY), code 291 (BTN_TOP), value 1 Event: time 1351223184.030166, -------------- SYN_REPORT ------------ Event: time 1351223184.558135, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.558138, type 1 (EV_KEY), code 291 (BTN_TOP), value 0 Event: time 1351223184.558168, -------------- SYN_REPORT ------------ [/code] The directional buttons on the pad are being identified as HAT0Y and HAT0X axes, thats zero, not the letter O. Aparently, this device used to work flawlessly on kernel 2.4.x systems, and even as late as ubunto 10.04. Perhaps the Joydev rules for identifying joypads has changed? Currently, this kind of bug is affecting a few different type of controller adapters, but since this is the one that i PERSONALLY have (and has been driving me my own special brand of crazy), its the one im documenting. What i think should be happening instead: The device should be registering js0 through js3, one for each port, or JS0 that will handle all of the connected devices with different numbered axes for each connected joypad. Either way, it should work as a joystick and stop controlling the mouse cursor. Please help!

    Read the article

  • EHome IR receiver and Ubuntu 13 - any one have this working?

    - by squakie
    I have a "generic" USB IR receiver I purchased off of Ebay to make my life a little easier with XBMC on my Ubuntu box. I am currently running 13.10 and have never tried nor have any knowledge of IR in Ubuntu. I know of lirc, and I know a lot of it is now included in the kernel. My understanding is that lirc in basic terms maps pulses from an remote control to functions - like keyboard or mouse clicks. It is also my understanding that I might still need a driver or something for my device. lsusb shows the device as: Bus 006 Device 003: ID 147a:e016 Formosa Industrial Computing, Inc. eHome Infrared Receiver dmesg shows the following pertaining to the device: [43635.311985] usb 6-2: USB disconnect, device number 2 [43641.344387] usb 6-2: new full-speed USB device number 3 using ohci-pci [43641.543454] usb 6-2: New USB device found, idVendor=147a, idProduct=e016 [43641.543467] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [43641.543473] usb 6-2: Product: eHome Infrared Transceiver [43641.543478] usb 6-2: Manufacturer: Formosa21 [43641.543483] usb 6-2: SerialNumber: FM000623 [43641.555736] Registered IR keymap rc-rc6-mce [43641.555968] input: Media Center Ed. eHome Infrared Remote Transceiver (147a:e016) as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/rc/rc2/input15 [43641.556221] rc2: Media Center Ed. eHome Infrared Remote Transceiver (147a:e016) as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/rc/rc2 [43641.556584] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input16 [43641.557186] rc rc2: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0 [43641.731965] mceusb 6-2:1.0: Registered Formosa21 eHome Infrared Transceiver with mce emulator interface version 1 [43641.731978] mceusb 6-2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active) (excuse the double spacing, but I had to put in extra cr/lf using "enter" or the entire thing was just one long unreadable string). When I connect the same IR receiver to a Raspberry Pi running OpenELEC/XBMC there is no flashing led unless I press a remote button, and the device works. In Ubuntu, the led is constantly blinking, and nothing happens when I press a remote key. I tried the command line program to test but it never echoes anything back to the terminal window. I believe it must need some sort of driver or something else, but I am completely in the dark on this. If it matters I also have: - Logitech wireless keyboard/mouse USB receiver - Tenda USB wireless adapter And.....I've also noticed some errors now that show in dmesg that seem to somehow related to HDMI if that makes any sense: 46721.144731] HDMI: ELD buf size is 0, force 128 [46721.144749] HDMI: invalid ELD data byte 0 [46721.444025] HDMI: ELD buf size is 0, force 128 [46721.444061] HDMI: invalid ELD data byte 0 [46721.743375] HDMI: ELD buf size is 0, force 128 [46721.743411] HDMI: invalid ELD data byte 0 [46722.043092] HDMI: ELD buf size is 0, force 128 [46722.043118] HDMI: invalid ELD data byte 0 [46722.343086] HDMI: ELD buf size is 0, force 128 [46722.343122] HDMI: invalid ELD data byte 0 [46722.642517] HDMI: ELD buf size is 0, force 128 [46722.642574] HDMI: invalid ELD data byte 0 [46722.942459] HDMI: ELD buf size is 0, force 128 [46722.942485] HDMI: invalid ELD data byte 0 [46723.242103] HDMI: ELD buf size is 0, force 128 [46723.242129] HDMI: invalid ELD data byte 0 [46723.541877] HDMI: ELD buf size is 0, force 128 [46723.541923] HDMI: invalid ELD data byte 0 [58366.651954] HDMI: ELD buf size is 0, force 128 [58366.651980] HDMI: invalid ELD data byte 0 [58366.951523] HDMI: ELD buf size is 0, force 128 [58366.951549] HDMI: invalid ELD data byte 0 [58367.251075] HDMI: ELD buf size is 0, force 128 [58367.251121] HDMI: invalid ELD data byte 0 [58367.550517] HDMI: ELD buf size is 0, force 128 [58367.550563] HDMI: invalid ELD data byte 0 [58367.850219] HDMI: ELD buf size is 0, force 128 [58367.850256] HDMI: invalid ELD data byte 0 [58368.150160] HDMI: ELD buf size is 0, force 128 [58368.150185] HDMI: invalid ELD data byte 0 [58368.449544] HDMI: ELD buf size is 0, force 128 [58368.449570] HDMI: invalid ELD data byte 0 [58368.749583] HDMI: ELD buf size is 0, force 128 [58368.749629] HDMI: invalid ELD data byte 0 [58369.049280] HDMI: ELD buf size is 0, force 128 [58369.049326] HDMI: invalid ELD data byte 0 [58394.706273] HDMI: ELD buf size is 0, force 128 [58394.706300] HDMI: invalid ELD data byte 0 [58394.706350] HDMI: ELD buf size is 0, force 128 [58394.706367] HDMI: invalid ELD data byte 0 [58395.003032] HDMI: ELD buf size is 0, force 128 [58395.003058] HDMI: invalid ELD data byte 0 [58395.302680] HDMI: ELD buf size is 0, force 128 [58395.302705] HDMI: invalid ELD data byte 0 [58395.602442] HDMI: ELD buf size is 0, force 128 [58395.602477] HDMI: invalid ELD data byte 0 [58395.902143] HDMI: ELD buf size is 0, force 128 [58395.902179] HDMI: invalid ELD data byte 0 [58396.201839] HDMI: ELD buf size is 0, force 128 [58396.201875] HDMI: invalid ELD data byte 0 [58396.501538] HDMI: ELD buf size is 0, force 128 [58396.501574] HDMI: invalid ELD data byte 0 [58396.801232] HDMI: ELD buf size is 0, force 128 [58396.801268] HDMI: invalid ELD data byte 0 [58397.100583] HDMI: ELD buf size is 0, force 128 [58397.100627] HDMI: invalid ELD data byte 0 [63095.766042] systemd-hostnamed[8875]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! dave@davepc:~$ EDIT: Maybe another way to look at this would be what does Ubuntu do or not do that OpenELEC does or doesn't do (on Raspberry Pi) such that it works in OpenELEC but not in Ubuntu?

    Read the article

  • Why is my external USB hard drive sometimes completely inaccessible?

    - by Eliah Kagan
    I have an external USB hard drive, consisting of an 1 TB SATA drive in a Rosewill RX35-AT-SU SLV Aluminum 3.5" Silver USB 2.0 External Enclosure, plugged into my SONY VAIO VGN-NS310F laptop. It is plugged directly into the computer (not through a hub). The drive inside the enclosure is a 7200 rpm Western Digital, but I don't remember the exact model. I can remove the drive from the enclosure (again), if people think it's necessary to know that detail. The drive is formatted ext4. I mount it dynamically with udisks on my Lubuntu 11.10 system, usually automatically via PCManFM. (I have had Lubuntu 12.04 on this machine, and experienced all this same behavior with that too.) Every once in a while--once or twice a day--it becomes inaccessible, and difficult to unmount. Attempting to unmount it with sudo umount ... gives an error message saying the drive is in use and suggesting fuser and lsof to find out what is using it. Killing processes found to be using the drive with fuser and lsof is sometimes sufficient to let me unmount it, but usually isn't. Once the drive is unmounted or the machine is rebooted, the drive will not mount. Plugging in the drive and turning it on registers nothing on the computer. dmesg is unchanged. The drive's access light usually blinks vigorously, as though the drive is being accessed constantly. Then eventually, after I keep the drive off for a while (half an hour), I am able to mount it again. While the drive doesn't work on this machine for a while, it will work immediately on another machine running the same version of Ubuntu. Sometimes bringing it back over from the other machine seems to "fix" it. Sometimes it doesn't. The drive doesn't always stop being accessible while mounted, before becoming unmountable. Sometimes it works fine, I turn off the computer, I turn the computer back on, and I cannot mount the drive. Currently this is the only drive with which I have this problem, but I've had problems that I think are the same as this, with different drives, on different Ubuntu machines. This laptop has another external USB drive plugged into it regularly, which doesn't have this problem. Unplugging that drive before plugging in the "problem" drive doesn't fix the problem. I've opened the drive up and made sure the connections were tight in the past, and that didn't seem to help (any more than waiting the same amount of time that it took to open and close the drive, before attempting to remount it). Does anyone have any ideas about what could be causing this, what troubleshooting steps I should perform, and/or how I could fix this problem altogether? Update: I tried replacing the USB data cable (from the enclosure to the laptop), as Merlin suggested. I should've tried that long ago, since it fits the symptoms perfectly (the drive works on another machine, which would make sense because the cable would be bent at a different angle, possibly completing a circuit of frayed wires). Unfortunately, though, this did not help--I have the same problem with the new cable. I'll try to provide additional detailed information about the drive inside the enclosure, next time I'm able to get the drive working. (At the moment I don't have another machine available to attach it.) Major Update (28 June 2012) The drive seems to have deteriorated considerably. I think this is so, because I've attached it to another machine and gotten lots of errors about invalid characters, when copying files from it. I am less interested in recovering data from the drive than I am in figuring out what is wrong with it. I specifically want to figure out if the problem is the drive or the enclosure. Now, when I plug the drive into the original machine where I was having the problems, it still doesn't appear (including with sudo fdisk -l), but it is recognized by the kernel and messages are added to dmesg. Most of the message consist of errors like this, repeated many times: [ 7.707593] sd 5:0:0:0: [sdc] Unhandled sense code [ 7.707599] sd 5:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 7.707606] sd 5:0:0:0: [sdc] Sense Key : Medium Error [current] [ 7.707614] sd 5:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 7.707621] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 7.707636] end_request: critical target error, dev sdc, sector 0 [ 7.707641] Buffer I/O error on device sdc, logical block 0 Here are all the lines from dmesg starting with when the drive is recognized. Please note that: I'm back to running Lubuntu 12.04 on this machine (and perhaps that's a factor in better error messages). Now that the drive has been plugged into another machine and back into this one, and also now that this machine is back to running 12.04, the drive's access light doesn't blink as I had described. Looking at the drive, it would appear as though it is working normally, with low or no access. This behavior (the errors) occurs when rebooting the machine with the drive plugged in, and also when manually plugging in the drive. A few of the messages are about /dev/sdb. That drive is working fine. The bad drive is /dev/sdc. I just didn't want to edit anything out from the middle.

    Read the article

  • Monitoring your WCF Web Apis with AppFabric

    - by cibrax
    The other day, Ron Jacobs made public a template in the Visual Studio Gallery for enabling monitoring capabilities to any existing WCF Http service hosted in Windows AppFabric. I thought it would be a cool idea to reuse some of that for doing the same thing on the new WCF Web Http stack. Windows AppFabric provides a dashboard that you can use to dig into some metrics about the services usage, such as number of calls, errors or information about different events during a service call. Those events not only include information about the WCF pipeline, but also custom events that any developer can inject and make sense for troubleshooting issues.      This monitoring capabilities can be enabled on any specific IIS virtual directory by using the AppFabric configuration tool or adding the following configuration sections to your existing web app, <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" /> <diagnostics etwProviderId="3e99c707-3503-4f33-a62d-2289dfa40d41"> <endToEndTracing propagateActivity="true" messageFlowTracing="true" /> </diagnostics> <behaviors> <serviceBehaviors> <behavior name=""> <etwTracking profileName="EndToEndMonitoring Tracking Profile" /> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel>   <microsoft.applicationServer> <monitoring> <default enabled="true" connectionStringName="ApplicationServerMonitoringConnectionString" monitoringLevel="EndToEndMonitoring" /> </monitoring> </microsoft.applicationServer> Bad news is that none of the configuration above can be easily set on code by using the new configuration model for WCF Web stack.  A good thing is that you easily disable it in the configuration when you no longer need it, and also uses ETW, a general-purpose and high-speed tracing facility provided by the operating system (it’s part of the windows kernel). By adding that configuration section, AppFabric will start monitoring your service automatically and providing some basic event information about the service calls. You need some custom code for injecting custom events in the monitoring data. What I did here is to copy and refactor the “WCFUserEventProvider” class provided as sample in the Ron’s template to make it more TDD friendly when using IoC. I created a simple interface “ILogger” that any service (or resource) can use to inject custom events or monitoring information in the AppFabric database. public interface ILogger { bool WriteError(string name, string format, params object[] args); bool WriteWarning(string name, string format, params object[] args); bool WriteInformation(string name, string format, params object[] args); } The “WCFUserEventProvider” class implements this interface by making possible to send the events to the AppFabric monitoring database. The service or resource implementation can receive an “ILogger” as part of the constructor. [ServiceContract] [Export] public class OrderResource { IOrderRepository repository; ILogger logger;   [ImportingConstructor] public OrderResource(IOrderRepository repository, ILogger logger) { this.repository = repository; this.logger = logger; }   [WebGet(UriTemplate = "{id}")] public Order Get(string id, HttpResponseMessage response) { var order = this.repository.All.FirstOrDefault(o => o.OrderId == int.Parse(id, CultureInfo.InvariantCulture)); if (order == null) { response.StatusCode = HttpStatusCode.NotFound; response.Content = new StringContent("Order not found"); }   this.logger.WriteInformation("Order Requested", "Order Id {0}", id);   return order; } } The example above uses “MEF” as IoC for injecting a repository and the logger implementation into the service. You can also see how the logger is used to write an information event in the monitoring database. The following image illustrates how the custom event is injected and the information becomes available for any user in the dashboard. An issue that you might run into and I hope the WCF and AppFabric teams fixed soon is that any WCF service that uses friendly URLs with ASP.NET routing does not get listed as a available service in the WCF services tab in the AppFabric console. The complete example is available to download from here.

    Read the article

  • .NET 4: &ldquo;Slim&rdquo;-style performance boost!

    - by Vitus
    RTM version of .NET 4 and Visual Studio 2010 is available, and now we can do some test with it. Parallel Extensions is one of the most valuable part of .NET 4.0. It’s a set of good tools for easily consuming multicore hardware power. And it also contains some “upgraded” sync primitives – Slim-version. For example, it include updated variant of widely known ManualResetEvent. For people, who don’t know about it: you can sync concurrency execution of some pieces of code with this sync primitive. Instance of ManualResetEvent can be in 2 states: signaled and non-signaled. Transition between it possible by Set() and Reset() methods call. Some shortly explanation: Thread 1 Thread 2 Time mre.Reset(); mre.WaitOne(); //code execution 0 //wating //code execution 1 //wating //code execution 2 //wating //code execution 3 //wating mre.Set(); 4 //code execution //… 5 Upgraded version of this primitive is ManualResetEventSlim. The idea in decreasing performance cost in case, when only 1 thread use it. Main concept in the “hybrid sync schema”, which can be done as following:   internal sealed class SimpleHybridLock : IDisposable { private Int32 m_waiters = 0; private AutoResetEvent m_waiterLock = new AutoResetEvent(false);   public void Enter() { if (Interlocked.Increment(ref m_waiters) == 1) return; m_waiterLock.WaitOne(); }   public void Leave() { if (Interlocked.Decrement(ref m_waiters) == 0) return; m_waiterLock.Set(); }   public void Dispose() { m_waiterLock.Dispose(); } } It’s a sample from Jeffry Richter’s book “CLR via C#”, 3rd edition. Primitive SimpleHybridLock have two public methods: Enter() and Leave(). You can put your concurrency-critical code between calls of these methods, and it would executed in only one thread at the moment. Code is really simple: first thread, called Enter(), increase counter. Second thread also increase counter, and suspend while m_waiterLock is not signaled. So, if we don’t have concurrent access to our lock, “heavy” methods WaitOne() and Set() will not called. It’s can give some performance bonus. ManualResetEvent use the similar idea. Of course, it have more “smart” technics inside, like a checking of recursive calls, and so on. I want to know a real difference between classic ManualResetEvent realization, and new –Slim. I wrote a simple “benchmark”: class Program { static void Main(string[] args) { ManualResetEventSlim mres = new ManualResetEventSlim(false); ManualResetEventSlim mres2 = new ManualResetEventSlim(false);   ManualResetEvent mre = new ManualResetEvent(false);   long total = 0; int COUNT = 50;   for (int i = 0; i < COUNT; i++) { mres2.Reset(); Stopwatch sw = Stopwatch.StartNew();   ThreadPool.QueueUserWorkItem((obj) => { //Method(mres, true); Method2(mre, true); mres2.Set(); }); //Method(mres, false); Method2(mre, false);   mres2.Wait(); sw.Stop();   Console.WriteLine("Pass {0}: {1} ms", i, sw.ElapsedMilliseconds); total += sw.ElapsedMilliseconds; }   Console.WriteLine(); Console.WriteLine("==============================="); Console.WriteLine("Done in average=" + total / (double)COUNT); Console.ReadLine(); }   private static void Method(ManualResetEventSlim mre, bool value) { for (int i = 0; i < 9000000; i++) { if (value) { mre.Set(); } else { mre.Reset(); } } }   private static void Method2(ManualResetEvent mre, bool value) { for (int i = 0; i < 9000000; i++) { if (value) { mre.Set(); } else { mre.Reset(); } } } } I use 2 concurrent thread (the main thread and one from thread pool) for setting and resetting ManualResetEvents, and try to run test COUNT times, and calculate average execution time. Here is the results (I get it on my dual core notebook with T7250 CPU and Windows 7 x64): ManualResetEvent ManualResetEventSlim Difference is obvious and serious – in 10 times! So, I think preferable way is using ManualResetEventSlim, because not always on calling Set() and Reset() will be called “heavy” methods for working with Windows kernel-mode objects. It’s a small and nice improvement! ;)

    Read the article

  • Can't connect to Wired Network after installing 12.04

    - by ezz9
    I have installed 12.04 into a used HP Compaq DC 7100 CMT. Plugged in LAN cable into the computer and it says network disconnected. from what I understand on the things I've read, it's not getting the address right, maybe it's just a guess (hardware address 00:16:35:78:47:bb). I know the LAN cable is working I can get on the net with the old computer. (Old computer is using device MAC address; Auto eth0 00:11:11:E6:4F:FE). I have put this address into the newer HP and it shows last used (minutes ago) but no Internet sever not found. I tried the hardware address it says never. I feel and think this should be easy to fix. But I just don't know. Here is the info everyone has asked for, but they never say what I should do. sudo lshw -C network; rfkill list; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; uname -a; ifconfig; route -n *-network description: ethernet interface product; NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:40:00.0 logical name: eth0 verson: 01 serial: 00:16:35:78:47:bb size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000-fd configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 duplex=full firmware=5751-v3.29a latency=0 link=yes multicast=yes port=twi sted pair speed=100Mbit/s resources: irq:17 memory:f0400000-f040ffff auto lo iface lo inet loopback DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION= "Ubuntu 12.04 LTS" 00:00.0 host bridge [0600]: Inter Corporation 82915G/P/GV/GL/PL/910GL Memory Con troller Hub [8086:2580] (rev 04) 00.02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL inte grated Graphics Controller [8086:2582] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #1 [8086:2658] (rev 03) 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #2 [8086:2659] (rev 03) 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #3 [8086:265a] (rev 03) 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #4 [8086:265b] (rev 03) 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB2 UHCI Controller [8086:265c] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI bridge [8086:244e] (rev d 3) 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/ FRW (ICH6 Family) AC'97 Autio conrtroller [8086:266e] (rev 03) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/RF (ICH6/ICH6R) LPC Interfa ce Bridge [8086:2640] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 fami ly) IDE Controller [8086:266f] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Con troller [8086:2651] (rev 03) 40:00.0 Ethernet controller [0200]: Broadcom Corporation NetXreme BCM5751 Gigab it Ethernet PCI Express [14e4:1677} (rev 01) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Linux bob-desktop 3.2.0-23-generic-pae #36-Ubuntu SMP Tpr 10 22:19:09 UTC 20 12 i686 i686 i386 GNU/Linux eth0 Link encap:Ethernet HWaddr 00:16:35:78:47:bb inet6 addr: fe80::216:35ff:47bb/64 Scope:link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2517 errors:0 dropped:0 overruns:0 frame:0 TX packets:164 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:164508 (164.5 KB) TX bytes: 40884 (40.0 KB) Interrupt:17 lo Link encap:Local loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3290 errors:0 dropped:0 overruns:0 frame:0 TX packets:3290 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen: 0 RX bytes:267212 (267.2 KB) TX bytes: 267212 (267.2 KB) Kernel Ip routing table Destination Gateway Genmask Flags Metric Ref Use Iface ran this sudo dhclient eth0 no reply ran this ip addr 1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST ,MULTICAST ,UP ,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/enter 00:16:35:78:47:BB brd ff:ff:ff:ff:ff:ff inet 169.254.7.172/16 brd 169.254.255.255 scope link eth0:avahi inet6 fe80::216:35ff:fe78:47bb/64 scope link valid_lft forever preferred_lft forever Help please.

    Read the article

  • 2D Selective Gaussian Blur

    - by Joshua Thomas
    I am attempting to use Gaussian blur on a 2D platform game, selectively blurring specific types of platforms with different amounts. I am currently just messing around with simple test code, trying to get it to work correctly. What I need to eventually do is create three separate render targets, leave one normal, blur one slightly, and blur the last heavily, then recombine on the screen. Where I am now is I have successfully drawn into a new render target and performed the gaussian blur on it, but when I draw it back to the screen everything is purple aside from the platforms I drew to the target. This is my .fx file: #define RADIUS 7 #define KERNEL_SIZE (RADIUS * 2 + 1) //----------------------------------------------------------------------------- // Globals. //----------------------------------------------------------------------------- float weights[KERNEL_SIZE]; float2 offsets[KERNEL_SIZE]; //----------------------------------------------------------------------------- // Textures. //----------------------------------------------------------------------------- texture colorMapTexture; sampler2D colorMap = sampler_state { Texture = <colorMapTexture>; MipFilter = Linear; MinFilter = Linear; MagFilter = Linear; }; //----------------------------------------------------------------------------- // Pixel Shaders. //----------------------------------------------------------------------------- float4 PS_GaussianBlur(float2 texCoord : TEXCOORD) : COLOR0 { float4 color = float4(0.0f, 0.0f, 0.0f, 0.0f); for (int i = 0; i < KERNEL_SIZE; ++i) color += tex2D(colorMap, texCoord + offsets[i]) * weights[i]; return color; } //----------------------------------------------------------------------------- // Techniques. //----------------------------------------------------------------------------- technique GaussianBlur { pass { PixelShader = compile ps_2_0 PS_GaussianBlur(); } } This is the code I'm using for the gaussian blur: public Texture2D PerformGaussianBlur(Texture2D srcTexture, RenderTarget2D renderTarget1, RenderTarget2D renderTarget2, SpriteBatch spriteBatch) { if (effect == null) throw new InvalidOperationException("GaussianBlur.fx effect not loaded."); Texture2D outputTexture = null; Rectangle srcRect = new Rectangle(0, 0, srcTexture.Width, srcTexture.Height); Rectangle destRect1 = new Rectangle(0, 0, renderTarget1.Width, renderTarget1.Height); Rectangle destRect2 = new Rectangle(0, 0, renderTarget2.Width, renderTarget2.Height); // Perform horizontal Gaussian blur. game.GraphicsDevice.SetRenderTarget(renderTarget1); effect.CurrentTechnique = effect.Techniques["GaussianBlur"]; effect.Parameters["weights"].SetValue(kernel); effect.Parameters["colorMapTexture"].SetValue(srcTexture); effect.Parameters["offsets"].SetValue(offsetsHoriz); spriteBatch.Begin(0, BlendState.Opaque, null, null, null, effect); spriteBatch.Draw(srcTexture, destRect1, Color.White); spriteBatch.End(); // Perform vertical Gaussian blur. game.GraphicsDevice.SetRenderTarget(renderTarget2); outputTexture = (Texture2D)renderTarget1; effect.Parameters["colorMapTexture"].SetValue(outputTexture); effect.Parameters["offsets"].SetValue(offsetsVert); spriteBatch.Begin(0, BlendState.Opaque, null, null, null, effect); spriteBatch.Draw(outputTexture, destRect2, Color.White); spriteBatch.End(); // Return the Gaussian blurred texture. game.GraphicsDevice.SetRenderTarget(null); outputTexture = (Texture2D)renderTarget2; return outputTexture; } And this is the draw method affected: public void Draw(SpriteBatch spriteBatch) { device.SetRenderTarget(maxBlur); spriteBatch.Begin(); foreach (Brick brick in blueBricks) brick.Draw(spriteBatch); spriteBatch.End(); blue = gBlur.PerformGaussianBlur((Texture2D) maxBlur, helperTarget, maxBlur, spriteBatch); spriteBatch.Begin(); device.SetRenderTarget(null); foreach (Brick brick in redBricks) brick.Draw(spriteBatch); foreach (Brick brick in greenBricks) brick.Draw(spriteBatch); spriteBatch.Draw(blue, new Rectangle(0, 0, blue.Width, blue.Height), Color.White); foreach (Brick brick in purpleBricks) brick.Draw(spriteBatch); spriteBatch.End(); } I'm sorry about the massive brick of text and images(or not....new user, I tried, it said no), but I wanted to get my problem across clearly as I have been searching for an answer to this for quite a while now. As a side note, I have seen the bloom sample. Very well commented, but overly complicated since it deals in 3D; I was unable to take what I needed to learn form it. Thanks for any and all help.

    Read the article

  • Blank screen after installing nvidia restricted driver

    - by LaMinifalda
    I have a new machine with a MSI N560GTX Ti Twin Frozr II/OC graphic card and MSI PH67A-C43 (B3) main board. If i install the current nvidia restricted driver and reboot the machine on Natty (64-bit), then i only get a black screen after reboot and my system does not respond. I can´t see the login screen. On nvidia web page i saw that the current driver is 270.41.06. Is that driver used as current driver? Btw, i am an ubuntu/linux beginner and therefore not very familiar with ubuntu. What can i do to solve the black screen problem? EDIT: Setting the nomodeset parameter does not solve the problem. After ubuntu start, first i see the ubuntu logo, then strange pixels and at the end the black screen. HELP! EDIT2: Thank you, but setting the "video=vesa:off gfxpayload=text" parameters do no solve the problem too. Same result as in last edit. HELP. I would like to see Unity. This is my grub: GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="video=vesa:off gfxpayload=text nomodeset quiet splash" GRUB_CMDLINE_LINUX=" vga=794" EDIT3: I dont know if it is important. If this edit is unnecessary and helpless I will delete it. There are some log files (Xorg.0.log - Xorg.4.log). I dont know how these log files relate to each other. Please, check the errors listed below. In Xorg.1.log I see the following error: [ 20.603] (EE) Failed to initialize GLX extension (ComIatible NVIDIA X driver not found) In Xorg.2.log I see the following error: [ 25.971] (II) Loading /usr/lib/xorg/modules/libfb.so [ 25.971] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 25.971] (==) NVIDIA(0): RGB weight 888 [ 25.971] (==) NVIDIA(0): Default visual is TrueColor [ 25.971] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 26.077] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [ 26.078] (EE) NVIDIA(0): check your system's kernel log for additional error [ 26.078] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the [ 26.078] (EE) NVIDIA(0): README for additional information. [ 26.078] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device! [ 26.078] (II) UnloadModule: "nvidia" [ 26.078] (II) Unloading nvidia [ 26.078] (II) UnloadModule: "wfb" [ 26.078] (II) Unloading wfb [ 26.078] (II) UnloadModule: "fb" [ 26.078] (II) Unloading fb [ 26.078] (EE) Screen(s) found, but none have a usable configuration. [ 26.078] Fatal server error: [ 26.078] no screens found [ 26.078] Please consult the The X.Org Found [...] In Xorg.4.log I see the following errors: [ 15.437] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 15.437] (==) NVIDIA(0): RGB weight 888 [ 15.437] (==) NVIDIA(0): Default visual is TrueColor [ 15.437] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 15.703] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0) [ 15.703] (--) NVIDIA(0): Memory: 1048576 kBytes [ 15.703] (--) NVIDIA(0): VideoBIOS: 70.24.11.00.00 [ 15.703] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 15.703] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 15.703] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 560 Ti at [ 15.703] (--) NVIDIA(0): PCI:1:0:0 [ 15.703] (--) NVIDIA(0): none [ 15.706] (EE) NVIDIA(0): No display devices found for this X screen. [ 15.943] (II) UnloadModule: "nvidia" [ 15.943] (II) Unloading nvidia [ 15.943] (II) UnloadModule: "wfb" [ 15.943] (II) Unloading wfb [ 15.943] (II) UnloadModule: "fb" [ 15.943] (II) Unloading fb [ 15.943] (EE) Screen(s) found, but none have a usable configuration. [ 15.943] Fatal server error: [ 15.943] no screens found EDIT4 There was a file /etc/X11/xorg.conf. As fossfreedom suggested I executed sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup However, there is still the black screen after reboot. EDIT5 Neutro's advice (reinstalling the headers) did not solve the problem, too. :-( Any further help is appreciated! EDIT6 I just installed driver 173.xxx. After reboot the system shows me only "Checking battery state". Just for information. I will google the problem, but help is also appreciated! ;-) EDIT7 When using the free driver (Ubuntu says that the free driver is in use and activated), Xorg.0.log shows the following errors: [ 9.267] (II) LoadModule: "nouveau" [ 9.267] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 9.267] (II) Module nouveau: vendor="X.Org Foundation" [ 9.267] compiled for 1.10.0, module version = 0.0.16 [ 9.267] Module class: X.Org Video Driver [ 9.267] ABI class: X.Org Video Driver, version 10.0 [ 9.267] (II) LoadModule: "nv" [ 9.267] (WW) Warning, couldn't open module nv [ 9.267] (II) UnloadModule: "nv" [ 9.267] (II) Unloading nv [ 9.267] (EE) Failed to load module "nv" (module does not exist, 0) [ 9.267] (II) LoadModule: "vesa" [...] [ 9.399] drmOpenDevice: node name is /dev/dri/card14 [ 9.402] drmOpenDevice: node name is /dev/dri/card15 [ 9.406] (EE) [drm] failed to open device [ 9.406] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 9.406] (WW) Falling back to old probe method for fbdev [ 9.406] (II) Loading sub module "fbdevhw" [ 9.406] (II) LoadModule: "fbdevhw" EDIT8 In the meanwhile i tried to install WIN7 64 bit on my machine. As a result i got a BSOD after installing the nvidia driver. :-) For this reason i sent my new machine back to the hardware reseller. I will inform you as soon as i have a new system. Thank you all for the great help and support. EDIT9 In the meanwhile I have a complete new system with "only" a MSI N460GTX Hawk, but more RAM. The system works perfect. :-) The original N560GTX had a hardware defect. Is is possible to close this question? THX!

    Read the article

  • Need help with testdisk output

    - by dan
    I had (note the past tense) an ubuntu 12.04 system with separate partitions for the base and /home directories. It started acting wonky, so I decided to do a reinstall with 12.10, intending just to do a reinstall to the base partition. After several seconds, I realize that the installer was repartitioning the drive and reinstalling, so I pulled the power cord. I'm now trying to recover as much as I can with testdisk, but it seems that testdisk is finding 100 unique partitions when I run it - they mostly tend to be HFS+ or solaris /home (which I think is just an ext4; I've never had solaris on the machine). I've pasted an abbreviated version of the testdisk output below (first ~100 lines, and then ~100 lines from the middle of the output). Is there a way to combine or recreate the partitions and then data recovery, or some other way maximize what I can recover (ideally as much of the file system as possible)? I really only care about what was in the /home directory - I'd rather not use photorec since I don't have another 2 TB HD lying around to recover to. Thanks, Dan Mon Dec 10 06:03:00 2012 Command line: TestDisk TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org OS: Linux, kernel 3.2.34-std312-amd64 (#2 SMP Sat Nov 17 08:06:32 UTC 2012) x86_64 Compiler: GCC 4.4 Compilation date: 2012-11-27T22:44:52 ext2fs lib: 1.42.6, ntfs lib: libntfs-3g, reiserfs lib: 0.3.1-rc8, ewf lib: none /dev/sda: LBA, HPA, LBA48, DCO support /dev/sda: size 3907029168 sectors /dev/sda: user_max 3907029168 sectors /dev/sda: native_max 3907029168 sectors Warning: can't get size for Disk /dev/mapper/control - 0 B - CHS 1 1 1, sector size=512 /dev/sr0 is not an ATA disk Hard disk list Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63, sector size=512 - WDC WD20EARS-00J2GB0, S/N:WD-WCAYY0075071, FW:80.00A80 Disk /dev/sdb - 1013 MB / 967 MiB - CHS 1014 32 61, sector size=512 - Generic Flash Disk, FW:8.07 Disk /dev/sr0 - 367 MB / 350 MiB - CHS 179470 1 1 (RO), sector size=2048 - PLDS DVD+/-RW DH-16AAS, FW:JD12 Partition table type (auto): Intel Disk /dev/sda - 2000 GB / 1863 GiB - WDC WD20EARS-00J2GB0 Partition table type: EFI GPT Analyse Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 Current partition structure: Bad GPT partition, invalid signature. search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB Results P MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB P Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB interface_write() 1 P MS Data 2048 3900753919 3900751872 2 P Linux Swap 3900755968 3907028975 6273008 search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14584, s_mnt_count=0/27, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 477915164 recover_EXT2: part_size 3823321312 MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB block_group_nr 1 ....snip...... MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 4096 3823325407 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 7028840 7033383 4544 FAT12, 2326 KB / 2272 KiB Mac HFS 67856948 67862179 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67862176 67867407 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67862244 67867475 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67867404 67872635 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67867472 67872703 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67872700 67877931 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67937834 67948067 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67938012 67948155 10144 HFS+ found using backup sector!, 5193 KB / 5072 KiB Mac HFS 67948064 67958297 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67948070 67958303 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67948152 67958295 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958292 67968435 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958300 67968533 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67992596 67997827 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67997824 68003055 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67997892 68003123 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 68003052 68008283 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68003120 68008351 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68008348 68013579 5232 HFS+, 2678 KB / 2616 KiB Solaris /home 84429840 123499141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84429952 123499253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493136 123562437 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493248 123562549 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566088 123635389 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566200 123635501 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571232 123640533 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571344 123640645 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84659952 123729253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84660064 123729365 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690504 123759805 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690616 123759917 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700424 123769725 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700536 123769837 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797720 123867021 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797832 123867133 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812544 123881845 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812656 123881957 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824552 123893853 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824664 123893965 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847528 123916829 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847640 123916941 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886840 123956141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886952 123956253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945488 124014789 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945600 124014901 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84957992 124027293 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84958104 124027405 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962240 124031541 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962352 124031653 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977168 124046469 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977280 124046581 39069302 UFS1, 20 GB / 18 GiB MS Data 174395467 178483851 4088385 ..... snip (it keeps going on for quite a while)

    Read the article

  • How to remap Fn key combinations (Lenovo G500)

    - by Anatoli
    I am running Kubuntu 13.10 on a Lenovo G500 laptop. My question is similar to this one: How can I remap my F keys on my HP laptop? That is to say, my F1-F12 keys are mapped to certain special functions, and only holding down the Fn key restores access to the standard F1-F12 keys. How do I remap certain keys? I would like to know if there is a way to remap Fx to Fn+Fx and vice-versa. As per the instructions of #87043 I checked my BIOS and there is no option to switch the Fx/Fn key functionality. Googling through Leonovo's support forums indicates a BIOS update enabling this is in the works, but there's no indication of when it will be complete. Using xev I was able to see what X sees when F1-F12 are pressed. Some send separate keycodes, but some are somehow mapped to key combinations or other unknown things: F1 - XF86AudioMute F2 - XF86AudioVolumeLower F3 - XF86AudioVolumeRaise F4 - Alt_L + F4 F5 - F5 F6 - Disables touchapd, cannot quite understand what xev tells me is happening, reenables if disabled (Kernel log reveals these have well-defined scancodes not assigned to any keycodes) F7 - XF86WLAN F8 - Alt_L + Ctrl_L + Tab F9 - Turns off LCD backlight, xev sees nothing F10 - Super_L + p F11 - XF86MonBrightnessLower F12 - XF86MonBrightnessRaise Following the instrusctions on this page: How do I remap certain keys? I remapped all the keys that have definite keycodes (F1, F2, F3, F5, F7, F11, F12) This still leaves the F4, F6, F8, F9, F10 keys not functioning properly. This is especially frustarting since F4, F6, F9 now kill the current window, the touchpad and screen, respectively. Any help on remapping these keys to their proper functions would be much appreciated! -Anatoli xev output for these 5 keys: F4 KeyPress event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674037, (228,298), root:(911,321), state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False FocusOut event, serial 40, synthetic NO, window 0x4800001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 40, synthetic NO, window 0x4800001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 4294967197 0 0 0 0 0 0 0 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 KeyRelease event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674040, (228,298), root:(911,321), state 0x8, keycode 70 (keysym 0xffc1, F4), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674042, (228,298), root:(911,321), state 0x8, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False ClientMessage event, serial 40, synthetic YES, window 0x4800001, message_type 0x12a (WM_PROTOCOLS), format 32, message 0x12b (WM_DELETE_WINDOW) F6 disabling touchpad MappingNotify event, serial 40, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 40, synthetic NO, window 0x4600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 40, synthetic NO, window 0x4600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MappingNotify event, serial 41, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 F6 enabling touchpad MappingNotify event, serial 42, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 42, synthetic NO, window 0x4600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 42, synthetic NO, window 0x4600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 42, synthetic NO, window 0x0, keys: 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MappingNotify event, serial 43, synthetic NO, window 0x0, request MappingPointer, first_keycode 0, count 0 F8 doing whatever it is F8 does KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508985, (13,-12), root:(696,11), state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508986, (13,-12), root:(696,11), state 0x8, keycode 37 (keysym 0xffe3, Control_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508988, (13,-12), root:(696,11), state 0xc, keycode 23 (keysym 0xff09, Tab), same_screen YES, XLookupString gives 1 bytes: (09) " " XmbLookupString gives 1 bytes: (09) " " XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508989, (13,-12), root:(696,11), state 0xc, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508991, (13,-12), root:(696,11), state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508994, (13,-12), root:(696,11), state 0x0, keycode 23 (keysym 0xff09, Tab), same_screen YES, XLookupString gives 1 bytes: (09) " " XFilterEvent returns: False F9 gives no output to xev F10 doing whatever it is F10 does KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586076, (9,-14), root:(692,9), state 0x0, keycode 10 (keysym 0x31, 1), same_screen YES, XLookupString gives 1 bytes: (31) "1" XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586552, (9,-14), root:(692,9), state 0x0, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586554, (9,-14), root:(692,9), state 0x40, keycode 33 (keysym 0x70, p), same_screen YES, XLookupString gives 1 bytes: (70) "p" XmbLookupString gives 1 bytes: (70) "p" XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586557, (9,-14), root:(692,9), state 0x40, keycode 33 (keysym 0x70, p), same_screen YES, XLookupString gives 1 bytes: (70) "p" XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586560, (9,-14), root:(692,9), state 0x40, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False

    Read the article

  • Changing the Game: Why Oracle is in the IT Operations Management Business

    - by DanKoloski
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Next week, in Orlando, is the annual Gartner IT Operations Management Summit. Oracle is a premier sponsor of this annual event, which brings together IT executives for several days of high level talks about the state of operational management of enterprise IT. This year, Sushil Kumar, VP Product Strategy and Business Development for Oracle’s Systems & Applications Management, will be presenting on the transformation in IT Operations required to support enterprise cloud computing. IT Operations transformation is an important subject, because year after year, we hear essentially the same refrain – large enterprises spend an average of two-thirds (67%!) of their IT resources (budget, energy, time, people, etc.) on running the business, with far too little left over to spend on growing and transforming the business (which is what the business actually needs and wants). In the thirtieth year of the distributed computing revolution (give or take, depending on how you count it), it’s amazing that we have still not moved the needle on the single biggest component of enterprise IT resource utilization. Oracle is in the IT Operations Management business because when management is engineered together with the technology under management, the resulting efficiency gains can be truly staggering. To put it simply – what if you could turn that 67% of IT resources spent on running the business into 50%? Or 40%? Imagine what you could do with those resources. It’s now not just possible, but happening. This seems like a simple idea, but it is a radical change from “business as usual” in enterprise IT Operations. For the last thirty years, management has been a bolted-on afterthought – we pick and deploy our technology, then figure out how to manage it. This pervasive dysfunction is a broken cycle that guarantees high ongoing operating costs and low agility. If we want to break the cycle, we need to take a more tightly-coupled approach. As a complete applications-to-disk platform provider, Oracle is engineering management together with technology across our stack and hooking that on-premise management up live to My Oracle Support. Let’s examine the results with just one piece of the Oracle stack – the Oracle Database. Oracle began this journey with the Oracle Database 9i many years ago with the introduction of low-impact instrumentation in the database kernel (“tell me what’s wrong”) and through Database 10g, 11g and 11gR2 has successively added integrated advisory (“tell me how to fix what’s wrong”) and lifecycle management and automated self-tuning (“fix it for me, and do it on an ongoing basis for all my assets”). When enterprises take advantage of this tight-coupling, the results are game-changing. Consider the following (for a full list of public references, visit this link): British Telecom improved database provisioning time 1000% (from weeks to minutes) which allows them to provide a new DBaaS service to their internal customers with no additional resources Cerner Corporation Saved $9.5 million in CapEx and OpEx AND launched a brand-new cloud business at the same time Vodafone Group plc improved response times 50% and reduced maintenance planning times 50-60% while serving 391 million registered mobile customers Or the recent Database Manageability and Productivity Cost Comparisons: Oracle Database 11g Release 2 vs. SAP Sybase ASE 15.7, Microsoft SQL Server 2008 R2 and IBM DB2 9.7 as conducted by independent analyst firm ORC. In later entries, we’ll discuss similar results across other portions of the Oracle stack and how these efficiency gains are required to achieve the agility benefits of Enterprise Cloud. Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

    Read the article

  • Session Report - Java on the Raspberry Pi

    - by Janice J. Heiss
    On mid-day Wednesday, the always colorful Oracle Evangelist Simon Ritter demonstrated Java on the Raspberry Pi at his session, “Do You Like Coffee with Your Dessert?”. The Raspberry Pi consists of a credit card-sized single-board computer developed in the UK with the intention of stimulating the teaching of basic computer science in schools. “I don't think there is a single feature that makes the Raspberry Pi significant,” observed Ritter, “but a combination of things really makes it stand out. First, it's $35 for what is effectively a completely usable computer. You do have to add a power supply, SD card for storage and maybe a screen, keyboard and mouse, but this is still way cheaper than a typical PC. The choice of an ARM (Advanced RISC Machine and Acorn RISC Machine) processor is noteworthy, because it avoids problems like cooling (no heat sink or fan) and can use a USB power brick. When you add in the enormous community support, it offers a great platform for teaching everyone about computing.”Some 200 enthusiastic attendees were present at the session which had the feel of Simon Ritter sharing a fun toy with friends. The main point of the session was to show what Oracle was doing to support Java on the Raspberry Pi in a way that is entertaining and fun. Ritter pointed out that, in addition to being great for teaching, it’s an excellent introduction to the ARM architecture, and runs well with Java and will get better once it has official hard float support. The possibilities are vast.Ritter explained that the Raspberry Pi Project started in 2006 with the goal of devising a computer to inspire children; it drew inspiration from the BBC Micro literacy project of 1981 that produced a series of microcomputers created by the Acorn Computer company. It was officially launched on February 29, 2012, with a first production of 10,000 boards. There were 100,000 pre-orders in one day; currently about 4,000 boards are produced a day. Ritter described the specification as follows:* CPU: ARM 11 core running at 700MHz Broadcom SoC package Can now be overclocked to 1GHz (without breaking the warranty!) * Memory: 256Mb* I/O: HDMI and composite video 2 x USB ports (Model B only) Ethernet (Model B only) Header pins for GPIO, UART, SPI and I2C He took attendees through a brief history of ARM Architecture:* Acorn BBC Micro (6502 based) Not powerful enough for Acorn’s plans for a business computer * Berkeley RISC Project UNIX kernel only used 30% of instruction set of Motorola 68000 More registers, less instructions (Register windows) One chip architecture to come from this was… SPARC * Acorn RISC Machine (ARM) 32-bit data, 26-bit address space, 27 registers First machine was Acorn Archimedes * Spin off from Acorn, Advanced RISC MachinesNext he presented its features:* 32-bit RISC Architecture–  ARM accounts for 75% of embedded 32-bit CPUs today– 6.1 Billion chips sold last year (zero manufactured by ARM)* Abstract architecture and microprocessor core designs– Raspberry Pi is ARM11 using ARMv6 instruction set* Low power consumption– Good for mobile devices– Raspberry Pi can be powered from 700mA 5V only PSU– Raspberry Pi does not require heatsink or fanHe described the current ARM Technology:* ARMv6– ARM 11, ARM Cortex-M* ARMv7– ARM Cortex-A, ARM Cortex-M, ARM Cortex-R* ARMv8 (Announced)– Will support 64-bit data and addressingHe next gave the Java Specifics for ARM: Floating point operations* Despite being an ARMv6 processor it does include an FPU– FPU only became standard as of ARMv7* FPU (Hard Float, or HF) is much faster than a software library* Linux distros and Oracle JVM for ARM assume no HF on ARMv6– Need special build of both– Raspbian distro build now available– Oracle JVM is in the works, release date TBDNot So RISCPerformance Improvements* DSP Enhancements* Jazelle* Thumb / Thumb2 / ThumbEE* Floating Point (VFP)* NEON* Security Enhancements (TrustZone)He spent a few minutes going over the challenges of using Java on the Raspberry Pi and covered:* Sound* Vision * Serial (TTL UART)* USB* GPIOTo implement sound with Java he pointed out:* Sound drivers are now included in new distros* Java Sound API– Remember to add audio to user’s groups– Some bits work, others not so much* Playing (the right format) WAV file works* Using MIDI hangs trying to open a synthesizer* FreeTTS text-to-speech– Should work once sound works properlyHe turned to JavaFX on the Raspberry Pi:* Currently internal builds only– Will be released as technology preview soon* Work involves optimal implementation of Prism graphics engine– X11?* Once the JavaFX implementation is completed there will be little of concern to developers-- It’s just Java (WORA). He explained the basis of the Serial Port:* UART provides TTL level signals (3.3V)* RS-232 uses 12V signals* Use MAX3232 chip to convert* Use this for access to serial consoleHe summarized his key points. The Raspberry Pi is a very cool (and cheap) computer that is great for teaching, a great introduction to ARM that works very well with Java and will work better in the future. The opportunities are limitless. For further info, check out, Raspberry Pi User Guide by Eben Upton and Gareth Halfacree. From there, Ritter tried out several fun demos, some of which worked better than others, but all of which were greeted with considerable enthusiasm and support and good humor (even when he ran into some glitches).  All in all, this was a fun and lively session.

    Read the article

  • boot issues - long delay, then "gave up waiting for root device"

    - by chazomaticus
    I've had this issue on and off for about two years now. I noticed it on a new (custom built) machine running 10.04 when that first came out, but then it went away until a few months ago. I've gone through a number of hard drive changes but I can't say specifically what if anything I changed hardware-wise to make it stop or start happening. I had assumed upgrading to a modern Ubuntu version would fix the issue, so I installed 12.04 beta on a spare partition last night, but it's still happening. Here's the issue. After grub loads and I select a kernel to boot, the screen goes blank save for a blinking cursor. It sits in this state for many long minutes before it finally gives up and gives me an initramfs shell with the message gave up waiting for root device (and lists the /dev/disk/by-uuid/... path it was waiting for) but no other specific diagnostic information. Now, here's the tricky part. For one, the problem is intermittent - sometimes it progresses from the blinking cursor to the Ubuntu splash boot screen in a few seconds, and once it gets that far it always continues booting fine. The really bizarre thing is that I can "force" it to "find" the root device by repeatedly pressing the space bar and hitting the machine's power button. If I tap those enough, eventually I will notice the hard drive light coming on, at which point it will always continue the boot process after a few seconds. Interestingly, if I wait slightly too long before pressing the power button (30s?), as soon as I press it I get the gave up waiting message and the initramfs shell. I've tried setting up /etc/fstab (and the grub menu.lst or whatever it's called nowadays) to use device names (e.g. /dev/sda1) instead of UUIDs, but I get the same effect just with the device name, not UUID, in the error message. I should also mention that when I boot to Windows 7, there is no issue. It boots slowly all the time just by virtue of being Windows, but it never hangs indefinitely. This would seem to indicate it's a problem in Ubuntu, not the hardware. It's pretty annoying to have to babysit the computer every time it boots. Any ideas? I'm at a loss. Not even sure how to diagnose the issue. Thanks! EDIT: Here's some dmesg output from 10.04. The 15 second gap is where it was doing nothing. I pressed the power button and space bar a few times, and the stuff at 16 seconds happened. Not sure what any of it means. [ 1.320250] scsi18 : ahci [ 1.320294] scsi19 : ahci [ 1.320320] ata19: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe100 ir q 18 [ 1.320323] ata20: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe180 ir q 18 [ 1.403886] usb 2-4: new high speed USB device using ehci_hcd and address 4 [ 1.562558] usb 2-4: configuration #1 chosen from 1 choice [ 16.477824] ata16: SATA link down (SStatus 0 SControl 300) [ 16.477843] ata19: SATA link down (SStatus 0 SControl 300) [ 16.477857] ata3: SATA link down (SStatus 0 SControl 300) [ 16.477895] ata15: SATA link down (SStatus 0 SControl 300) [ 16.477906] ata20: SATA link down (SStatus 0 SControl 300) [ 16.477977] ata17: SATA link down (SStatus 0 SControl 300) [ 16.478003] ata12: SATA link down (SStatus 0 SControl 300) [ 16.478046] ata13: SATA link down (SStatus 0 SControl 300) [ 16.478063] ata14: SATA link down (SStatus 0 SControl 300) [ 16.478108] ata11: SATA link down (SStatus 0 SControl 300) [ 16.478123] ata18: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.478127] ata6: SATA link down (SStatus 0 SControl 300) [ 16.478157] ata5: SATA link down (SStatus 0 SControl 300) [ 16.478193] ata18.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 After that, it took its sweet time, and I had to keep hitting space bar to coax it along. Here's some more dmesg output from a little later in the boot process: [ 17.982291] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.0/input/input4 [ 17.982335] generic-usb 0003:046E:5506.0002: input,hidraw1: USB HID v1.10 Key board [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input0 [ 18.005211] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.1/input/input5 [ 18.005274] generic-usb 0003:046E:5506.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input1 [ 22.484906] EXT4-fs (sda6): INFO: recovery required on readonly filesystem [ 22.484910] EXT4-fs (sda6): write access will be enabled during recovery [ 22.548542] EXT4-fs (sda6): recovery complete [ 22.549074] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 32.516772] Adding 20482832k swap on /dev/sda5. Priority:-1 extents:1 across:20482832k [ 32.742540] udev: starting version 151 [ 33.002004] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 33.008135] parport_pc 00:09: reported by Plug and Play ACPI [ 33.008186] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 33.012076] lp: driver loaded but no devices found [ 33.037271] ppdev: user-space parallel port driver [ 33.090256] lp0: using parport0 (interrupt-driven). Any clues in there?

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >