Search Results

Search found 13911 results on 557 pages for 'sharepoint group'.

Page 169/557 | < Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >

  • Web part error on Team Foundation Server Project Portal Sharepoint site...

    - by user304671
    Hi all, I recently installed TFS 2010 with the included sharepoint services on a single server. I am getting the following error multiple times on the project dashboard web page on the TFS2010 project protal after creating a brand new project in the default project collection. I am not an expert with WSS, so any guidance will be greatly appreciated. After reading a few articles I understand there are some DLL that are probably not declared as safe in a web config file. But I am not sure which DLL they are and where the web config file is. I looked at IIS to determine the directory structure in IIS is quiet different to the URL path ...Thanks very much. Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type is not registered as safe. Thanks in advance..

    Read the article

  • How to activate a solution in SharePoint 2010 using client object model?

    - by Boris
    Here's the situation: I have a customized SharePoint2010 site created. I saved that site as a site template, which has created a solution. I want to be able to activate that solution using SharePoint2010 client object model. Is that possible? If yes, could you show me how to do it? If no, then could you show me how it can be done using standard SharePoint object model, or any other method? Thank you for all the help.

    Read the article

  • Sharepoint 2010, get the Distinct Values of a User Profile Property?

    - by Michael Stum
    Is there any way in SharePoint 2010 to get the Distinct values of a property accross all users? For example, I want a list of all Departments in the Profile Store. In SQL I can do SELECT DISTINCT(PropertyVal) FROM [ProfileDB].[dbo].[UserProfileValue] WHERE PropertyID = 14 but accessing the SQL Database is a big no-no of course, so I wonder if there is something in the object model? Note that accessing the User Information List on an SPSite is not good enough, as only a fraction of all users is in that list. I want to get it directly from the Profile Store.

    Read the article

  • Advantages of using WCF to work with Sharepoint Services WSS3.0?

    - by val
    Hi folks, what is your opinion or better off your practical experience using WCF to work with WSS instead of SP web services? I am writing some custom library for our software to store and retrieve files from WSS document libraries using sharepoint web services. I am not entirely happy with the performance of the sp web services - a bit too slow in many cases. Now, microsoft claims a significant improvements in WCF over remoting and I am looking into a good way to use WCF for my file services. Any suggestions or ideas? Maybe a good source of coding practices or blogs? Thanks a lot, Val

    Read the article

  • Sharepoint 2010 search: How to modify search query before submit (programmatically?)

    - by palgo
    Hi, I'm making a custom search box Web Part, similar to the OOTB Web Part from SharePoint (SearchBoxEx class). I'm interested in modifying the search query with additional text before it is submitted, based on a custom checkbox added on the Web Part. Any help on how I can achieve this? UPDATE: I've used the AppendToQuery and AppQueryTerms properties, but this will rewrite the text in the search box as well. I'm interested in passing the values "in the background", maybe as an extra parameter. Point is that the query modification should happen without the user seeing it explicitly.

    Read the article

  • Free SQL Server training? Now you’re talking.

    - by Fatherjack
    SQL Server user groups are everywhere, literally all over the globe there are SQL Server professionals meeting on a regular basis, sharing ideas, solving problems, learning about how to do new stuff and new ways to do old stuff and it’s all for free. I don’t have detailed figures but of all the SQL Server professionals there are only a small number of them attend these user groups. Those people are the people that are taking the time and making then effort to make themselves better at their chosen trade, more employable and having a good time. For free. I don’t know why but there are many people that don’t seem to want to be the best they can be. Some of you enlightened people that do already attend could be doing more though. Have you ever spoken at  your group? Not just in the break while you have a mouthful of pizza and a drink in your hand but had the attention of the whole group listen to you speak. It doesn’t need to be a full hour, it doesn’t need to be some obscure deeply technical demonstration of SQL Server internals, just a few minutes on something that you do that might help other people with their daily work. A neat process that helps you get from Problem A to Solution B. There is no need to get concerned that becoming a speaker means that you suddenly have to know more than anyone else in the room. This is you talking about something that you experienced. What you did, what you would repeat, what you might do differently next time. No one in the audience can pick you up on a technicality. If someone comes out with a great idea that you hadn’t thought of, say “That’s a great idea, I didn’t think of that while we had the problem on our hands. I’ll try to remember that for next time”. If someone is looking to show you up for picking the wrong decision (and this, in my experience, is very uncommon indeed) then you simply give a reply like “Well, at the time we chose that option. Perhaps another time then we would tackle things differently but we were happy with how our solution worked”. It’s sharing things like this that makes user groups have a real value, talking about how you coped with or averted a disaster, a handy little section of code or using a tool in a particular way that you take for granted that might, just might, be something that other people haven’t thought of that solves a problem or saves some time for them. At the next meeting you might get the same benefit from a different person and so it goes on. As individuals benefits so the community benefits. For free. Things I encourage you to do; If you are a chapter or user group leader; encourage someone from your group who has never spoken before to start speaking. If you are a chapter or user group attendee that hasn’t spoken before; speak for at least 5 minutes on something related to SQL Server at any group meeting. If you don’t currently attend a user group; please go along to you nearest one when they are meeting next and invest in yourself and your future. UK user group details are here: http://sqlsouthwest.co.uk/national_ug.htm , PASS chapters outside the UK are found via http://www.sqlpass.org/PASSChapters/LocalChapters.aspx. If you are unsure of how you might achieve any of these things then get in touch with me*, I’ll give you specific advice on getting started on any of the above points and help you prove to yourself what you are capable of. SQL Community – be part of it and make it better. Let me know how you get on in the comments.

    Read the article

  • Dual Screen will only mirror after 12.04 upgrade

    - by Ne0
    I have been using Ubuntu with a dual screen for years now, after upgrading to 12.04 LTS i cannot get my dual screen working properly Graphics: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV350 AR [Radeon 9600] 01:00.1 Display controller: Advanced Micro Devices [AMD] nee ATI RV350 AR [Radeon 9600] (Secondary) I noticed i was using open source drivers and attempted to install official binaries using the methods in this thread. Output: liam@liam-desktop:~$ sudo apt-get install fglrx fglrx-amdcccle Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: fglrx fglrx-amdcccle 2 upgraded, 0 newly installed, 0 to remove and 12 not upgraded. Need to get 45.1 MB of archives. After this operation, 739 kB of additional disk space will be used. Get:1 http://gb.archive.ubuntu.com/ubuntu/ precise/restricted fglrx i386 2:8.960-0ubuntu1 [39.2 MB] Get:2 http://gb.archive.ubuntu.com/ubuntu/ precise/restricted fglrx-amdcccle i386 2:8.960-0ubuntu1 [5,883 kB] Fetched 45.1 MB in 1min 33s (484 kB/s) (Reading database ... 328081 files and directories currently installed.) Preparing to replace fglrx 2:8.951-0ubuntu1 (using .../fglrx_2%3a8.960-0ubuntu1_i386.deb) ... Removing all DKMS Modules Error! There are no instances of module: fglrx 8.951 located in the DKMS tree. Done. Unpacking replacement fglrx ... Preparing to replace fglrx-amdcccle 2:8.951-0ubuntu1 (using .../fglrx-amdcccle_2%3a8.960-0ubuntu1_i386.deb) ... Unpacking replacement fglrx-amdcccle ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Setting up fglrx (2:8.960-0ubuntu1) ... update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group i386-linux-gnu_gl_conf is broken. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group i386-linux-gnu_gl_conf is broken. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-initramfs: deferring update (trigger activated) update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Loading new fglrx-8.960 DKMS files... Building only for 3.2.0-25-generic-pae Building for architecture i686 Building initial module for 3.2.0-25-generic-pae Done. fglrx: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-25-generic-pae/updates/dkms/ depmod....... DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up fglrx-amdcccle (2:8.960-0ubuntu1) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Processing triggers for libc-bin ... ldconfig deferred processing now taking place liam@liam-desktop:~$ sudo aticonfig --initial -f aticonfig: No supported adapters detected When i attempt to get my settings back to what they were before upgrading i get this message requested position/size for CRTC 81 is outside the allowed limit: position=(1440, 0), size=(1440, 900), maximum=(1680, 1680) and GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._gnome_2drr_2derror_2dquark.Code3: requested position/size for CRTC 81 is outside the allowed limit: position=(1440, 0), size=(1440, 900), maximum=(1680, 1680) Any idea's on what i need to do to fix this issue?

    Read the article

  • Squid 2.7.STABLE3-4.1 as a transparent proxy on Ubuntu Server 9.04

    - by E3 Group
    Can't get this to work at all! I'm trying to get this linux box to act as a transparent proxy and, with the help of DHCP, force everyone on the network to gate into the proxy. I have two ethernet connections, both to the same switch. And I'm trying to get 192.168.1.234 to become the default gateway. The actual WAN connection is to a gateway 192.168.1.1. eth0 is 192.168.1.234 eth1 is 192.168.1.2 Effectively I'm trying to make eth0 a LAN only interface and eth1 a WAN interface. I've oi should set the gateway for eth1 to point to 192.168.1.234 my squid.conf file has the following directives added at the bottom: nly set eth0 to have a gateway address in /etc/network/interfaces I'm not sure whether http_port 3128 transparent acl lan src 192.168.1.0/24 acl lh src 127.0.0.1/255.255.255.0 http_access allow lan http_access allow lh i've added the following routing commands: iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.1.2:3128 iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 I set a computer with TCP settings 192.168.1.234 as the gateway and opened up google.com, but it comes up with a request error. Any ideas why this isn't working? :( Been searching continuously for a solution to no avail. ----------------------------- EDIT ------------------------------- Managed to get it to route properly to the squid, here's the error I get in the browser: ERROR The requested URL could not be retrieved While trying to process the request: GET / HTTP/1.1 Host: www.google.com User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-gb,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cache-Control: max-age=0 The following error was encountered: * Invalid Request Some aspect of the HTTP Request is invalid. Possible problems: * Missing or unknown request method * Missing URL * Missing HTTP Identifier (HTTP/1.0) * Request is too large * Content-Length missing for POST or PUT requests * Illegal character in hostname; underscores are not allowed Your cache administrator is webmaster. Generated Mon, 26 Oct 2009 03:41:15 GMT by mjolnir.lloydharrington.local (squid/2.7.STABLE3)

    Read the article

  • Windows Server 2003 SBS domain in multiple sites

    - by E3 Group
    We have about 25 employees in our current office and are looking to open up another office in another capital city housing about 15 employees. In our current office, we are running a domain hosted by a 2003 SBS server and I've been tasked by the boss to expand our infrastructure to the new office in the cheapest way possible (cheapest way in the short run that is, because my boss doesn't think more than 6 months ahead). So I'm looking to get a second hand server and have it run Server 2003 Std with exchange server 2003. These are the things that it needs to do: Replicate shared folders that are hosted in the parent LAN. Deliver emails hosted in the parent Exchange Server Somehow link up with the parent domain controller and push the AD to the remote site I'm pretty sure 3 is impossible but the DC would be available if a VPN connection is present, right? On that note, would I be looking at hardware VPN connections? I'm not sure how to deploy the new site as this is my first time doing it and i'm making it especially difficult for myself, seeing as the AD and DC is on an SBS server. Would I first start by establishing a VPN connection and then joining the new server to the domain? Will things 'just work' if I install exchange onto the new server and point outlooks to it? and how would I be able to replicate shared folders?

    Read the article

  • Looking for a new backup solution to replace dying tape drive

    - by E3 Group
    We're running Windows Server 2003 SBS and another machine with Server 2003 Standard on it. The SBS server is about 7 years old running pretty much 24/7 - a HP server of some description. We have an Ultrium 448 cycling LTO2 400GB tapes daily and incrementally backing up approximately 100gb worth of data (20gb C:\ and system state, 40gb exchange, 40gb database for some crap marketing software) on BackupExec 10D. As of 5 months ago, the backups have been consistently failing with IO errors, bad reads and some write errors. When I say consistent, I mean every time and we haven't had a proper backup for the entire 5 months - So if the server explodes tomorrow, 7 years worth of data will just cease to exist. I've only just recently rejoined the company and am looking at rectifying the more concerning problems, so the first thing I did was try a backup to an USB2.0 external drive. It was excruciatingly slow. In fact it was so slow it took 40 hours and it still wasn't finished. I ended up cancelling it and reconfiguring the selections again to reduce file size. This, however, isn't a permanent solution. I concluded that the IO error was either from a faulty tape drive (which has a tape stuck in there right now and not coming out) or from a dying SCSI controller. Neither of them are good news and both are extremely expensive to fix. I'm operating on an extremely low budget so have been looking at outsourcing the backups. A company in Sydney (where I'm located) offer incremental online backups via a NAS. It costs almost double a new tape drive but offers monthly repayments which will let us get through times when cash flow is minimal. It seems like a sweet deal but it is still a little bit pricey. So I'm looking for a cheaper, yet reliable solution. Maybe some in-house NAS or something offsite? The idea is to avoid using tapes. Are there any recommendations for rectifying my current situation? Or are tapes the only way to go? I'm concerned that the server will die one day in the near future and I must be able to restore it to another server with different hardware.

    Read the article

  • Looking for a tagging media library application for Windows

    - by E3 Group
    I'm looking for a program that can: 1) index specific folders and capture video, music and picture files. 2) allow me to assign tags or categories to these files 3) allow me to search by tags or filenames I have a large collection of movies, music, etc that I want to categorise and tag with multiple tags. Haven't yet been able to find any applications that will do this for me.

    Read the article

  • Select * from 'many to many' SQL relationship

    - by Rampant Creative Group
    I'm still learning SQL and my brain is having a hard time with this one. Say I have 3 tables: teams players and teams_players as my link table All I want to do is run a query to get each team and the players on them. I tried this: SELECT * FROM teams INNER JOIN teams_players ON teams.id = teams_players.team_id INNER JOIN players ON teams_players.player_id = players.id But it returned a separate row for each player on each team. Is JOIN the right way to do it or should I be doing something else? ----------------------------------------- Edit Ok, so from what I'm hearing, this isn't necessarily a bad way to do it. I'll just have to group the data by team while I'm doing my loop. I have not yet tried the modified SQL statements provided, but I will today and get back to you. To answer the question about structure - I guess I wasn't thinking about the returned row structure which is part of what lead to my confusion. In this particular case, each team is limited to 4 players (or less) so I guess the structure that would be helpful to me is something like the following: teams.id, teams.name, players.id, players.name, players.id, players.name, players.id, players.name, players.id, players.name, 1 Team ABC 1 Jim 2 Bob 3 Ned 4 Roy 2 Team XYZ 2 Bob 3 Ned 5 Ralph 6 Tom

    Read the article

  • ODI 12c - Aggregating Data

    - by David Allan
    This posting will look at the aggregation component that was introduced in ODI 12c. For many ETL tool users this shouldn't be a big surprise, its a little different than ODI 11g but for good reason. You can use this component for composing data with relational like operations such as sum, average and so forth. Also, Oracle SQL supports special functions called Analytic SQL functions, you can use a specially configured aggregation component or the expression component for these now in ODI 12c. In database systems an aggregate transformation is a transformation where the values of multiple rows are grouped together as input on certain criteria to form a single value of more significant meaning - that's exactly the purpose of the aggregate component. In the image below you can see the aggregate component in action within a mapping, for how this and a few other examples are built look at the ODI 12c Aggregation Viewlet here - the viewlet illustrates a simple aggregation being built and then some Oracle analytic SQL such as AVG(EMP.SAL) OVER (PARTITION BY EMP.DEPTNO) built using both the aggregate component and the expression component. In 11g you used to just write the aggregate expression directly on the target, this made life easy for some cases, but it wan't a very obvious gesture plus had other drawbacks with ordering of transformations (agg before join/lookup. after set and so forth) and supporting analytic SQL for example - there are a lot of postings from creative folks working around this in 11g - anything from customizing KMs, to bypassing aggregation analysis in the ODI code generator. The aggregate component has a few interesting aspects. 1. Firstly and foremost it defines the attributes projected from it - ODI automatically will perform the grouping all you do is define the aggregation expressions for those columns aggregated. In 12c you can control this automatic grouping behavior so that you get the code you desire, so you can indicate that an attribute should not be included in the group by, that's what I did in the analytic SQL example using the aggregate component. 2. The component has a few other properties of interest; it has a HAVING clause and a manual group by clause. The HAVING clause includes a predicate used to filter rows resulting from the GROUP BY clause. Because it acts on the results of the GROUP BY clause, aggregation functions can be used in the HAVING clause predicate, in 11g the filter was overloaded and used for both having clause and filter clause, this is no longer the case. If a filter is after an aggregate, it is after the aggregate (not sometimes after, sometimes having).  3. The manual group by clause let's you use special database grouping grammar if you need to. For example Oracle has a wealth of highly specialized grouping capabilities for data warehousing such as the CUBE function. If you want to use specialized functions like that you can manually define the code here. The example below shows the use of a manual group from an example in the Oracle database data warehousing guide where the SUM aggregate function is used along with the CUBE function in the group by clause. The SQL I am trying to generate looks like the following from the data warehousing guide; SELECT channel_desc, calendar_month_desc, countries.country_iso_code,       TO_CHAR(SUM(amount_sold), '9,999,999,999') SALES$ FROM sales, customers, times, channels, countries WHERE sales.time_id=times.time_id AND sales.cust_id=customers.cust_id AND   sales.channel_id= channels.channel_id  AND customers.country_id = countries.country_id  AND channels.channel_desc IN   ('Direct Sales', 'Internet') AND times.calendar_month_desc IN   ('2000-09', '2000-10') AND countries.country_iso_code IN ('GB', 'US') GROUP BY CUBE(channel_desc, calendar_month_desc, countries.country_iso_code); I can capture the source datastores, the filters and joins using ODI's dataset (or as a traditional flow) which enables us to incrementally design the mapping and the aggregate component for the sum and group by as follows; In the above mapping you can see the joins and filters declared in ODI's dataset, allowing you to capture the relationships of the datastores required in an entity-relationship style just like ODI 11g. The mix of ODI's declarative design and the common flow design provides for a familiar design experience. The example below illustrates flow design (basic arbitrary ordering) - a table load where only the employees who have maximum commission are loaded into a target. The maximum commission is retrieved from the bonus datastore and there is a look using employees as the driving table and only those with maximum commission projected. Hopefully this has given you a taster for some of the new capabilities provided by the aggregate component in ODI 12c. In summary, the actions should be much more consistent in behavior and more easily discoverable for users, the use of the components in a flow graph also supports arbitrary designs and the tool (rather than the interface designer) takes care of the realization using ODI's knowledge modules. Interested to know if a deep dive into each component is interesting for folks. Any thoughts? 

    Read the article

  • ?Linux 6???UDEV??RAC ASM???????

    - by Liu Maclean(???)
    Maclean?????UDEV??ASMLIB?RAC???????????,???????????????????:Why ASMLIB and why not???UDEV????RAC ASM?????  ?«??UDEV????RAC ASM????? »???????????????,????????udev rule????: for i in b c d e f g h i j k ; do echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id -g -u -s %p\", RESULT==\"`scsi_id -g -u -s /block/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" done ?????Linux 5?????, ????????redhat/Oracle Linux 6???????????? ????: ?OEL6??RHEL6?,????????? ??????:1. scsi_id??????????,scsi_id -g -u -s??????????2. udevtest???????,????udevadm??How to use udev for Oracle ASM in Oracle Linux 6   ???????????,???redhat/Oracle Linux 6??????udev rule ????: 1. #????? Linux 6.0???? [root@vrh6 dev]# cat /etc/issue Oracle Linux Server release 6.2 Kernel \r on an \m 2. #?????/etc/scsi_id.config echo "options=--whitelisted --replace-whitespace" >> /etc/scsi_id.config 3. #?????????udev?? [root@vrh6 dev]# ls -l sd* brw-rw----. 1 root disk 8, 0 Jun 30 09:29 sda brw-rw----. 1 root disk 8, 1 Jun 30 09:29 sda1 brw-rw----. 1 root disk 8, 2 Jun 30 09:29 sda2 brw-rw----. 1 root disk 8, 16 Jun 30 09:29 sdb brw-rw----. 1 root disk 8, 32 Jun 30 09:29 sdc brw-rw----. 1 root disk 8, 48 Jun 30 09:29 sdd brw-rw----. 1 root disk 8, 64 Jun 30 09:29 sde brw-rw----. 1 root disk 8, 80 Jun 30 09:29 sdf ??????? sdb-> sdf???????? 4. ? b->f?????for ???,??: # AUTO UDEV RULE BY Maclean Liu 2012/06/30 for i in b c d e f ; do echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" done ????sdb->sdf ?????RULE,????RULE???/etc/udev/rules.d/99-oracle-asmdevices.rules? ??????????? ,??RULE?99-oracle-asmdevices.rules # AUTO UDEV RULE BY Maclean Liu 2012/06/30 for i in b c d e f ; do echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" >> /etc/udev/rules.d/99-oracle-asmdevices.rules done 5. ?????root??/sbin/start_udev ?? ??????: [root@vrh6 dev]# echo "options=--whitelisted --replace-whitespace" >> /etc/scsi_id.config [root@vrh6 dev]# for i in b c d e f ; > do > echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" >> /etc/udev/rules.d/99-oracle-asmdevices.rules > done [root@vrh6 dev]# [root@vrh6 dev]# cat /etc/udev/rules.d/99-oracle-asmdevices.rules KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB09cadb31-cfbea255", NAME="asm-diskb", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB5f097069-59efb82f", NAME="asm-diskc", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB4e1a81c0-20478bc4", NAME="asm-diskd", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VBdcce9285-b13c5a27", NAME="asm-diske", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB82effe1a-dbca7dff", NAME="asm-diskf", OWNER="grid", GROUP="asmadmin", MODE="0660" [root@vrh6 dev]# [root@vrh6 dev]# /sbin/start_udev Starting udev: [ OK ] [root@vrh6 dev]# ls -l asm* brw-rw----. 1 grid asmadmin 8, 16 Jun 30 09:34 asm-diskb brw-rw----. 1 grid asmadmin 8, 32 Jun 30 09:34 asm-diskc brw-rw----. 1 grid asmadmin 8, 48 Jun 30 09:34 asm-diskd brw-rw----. 1 grid asmadmin 8, 64 Jun 30 09:34 asm-diske brw-rw----. 1 grid asmadmin 8, 80 Jun 30 09:34 asm-diskf

    Read the article

  • QoS basics on a Cisco ASA

    - by qbn
    Could someone briefly explain how to use QoS on Cisco ASA 5505? I have the basics of policing down, but what about shaping and priorities? Basically what I'm trying to do is carve out some bandwidth for my VPN subnets (in an object-group called priority-traffic). I've seen this Cisco QoS document, however configuring shaping and priority-queue don't seem to have any effects in my test. A full download of the linux kernel from kernel.org will boost a ping to a server via VPN sky high. Policing has been successful in passing this test, although it doesn't seem as efficient (I cap non-vpn traffic at 3 of my 4.5 megabits of bandwidth). Am I misunderstanding the results of the test? I think there is some simple concept I'm not grasping here. EDIT: Here is my config thus far (I have 4.5 megabits of bandwidth): access-list priority-traffic extended permit ip object-group priority-traffic any access-list priority-traffic extended permit ip any object-group priority-traffic access-list priority-traffic extended permit icmp object-group priority-traffic any access-list priority-traffic extended permit icmp any object-group priority-traffic access-list non-priority-traffic extended deny ip object-group priority-traffic any access-list non-priority-traffic extended deny ip any object-group priority-traffic access-list non-priority-traffic extended permit ip any any priority-queue outside queue-limit 440 class-map non-priority-traffic match access-list non-priority-traffic class-map priority-traffic match access-list priority-traffic class-map inspection_default match default-inspection-traffic policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp policy-map outbound-qos-policy class non-priority-traffic police input 2500000 police output 2500000 class priority-traffic priority service-policy global_policy global service-policy outbound-qos-policy interface outside

    Read the article

  • Installing CDT on top of JDT: Conflicting Dependency

    - by someguy
    I am trying to install the CDT plugin on top my existing version of Eclipse, which was for Java. The problem is that I got this error message when I tried doing so via "Install New Software...": Cannot complete the install because of a conflicting dependency. Software being installed: Eclipse C/C++ Development Tools 4.0.3.200802251018 (org.eclipse.cdt.feature.group 4.0.3.200802251018) Software currently installed: Eclipse IDE for Java Developers 1.3.1.20100916-1202 (epp.package.java 1.3.1.20100916-1202) Only one of the following can be installed at once: International Components for Unicode for Java (ICU4J) 4.2.1.v20100412 (com.ibm.icu 4.2.1.v20100412) com.ibm.icu 3.6.1.v20070906 Cannot satisfy dependency: From: Eclipse IDE for Java Developers 1.3.1.20100916-1202 (epp.package.java 1.3.1.20100916-1202) To: org.eclipse.epp.package.java.feature.feature.group [1.3.1.20100916-1202] Cannot satisfy dependency: From: Eclipse C/C++ Development Tools 4.0.3.200802251018 (org.eclipse.cdt.feature.group 4.0.3.200802251018) To: com.ibm.icu [3.4.0,4.0.0) Cannot satisfy dependency: From: EPP Java Package 1.3.1.20100916-1202 (org.eclipse.epp.package.java.feature.feature.group 1.3.1.20100916-1202) To: org.eclipse.rcp.feature.group 3.6.0 Cannot satisfy dependency: From: Eclipse RCP 3.6.0.v20100519-9OArFKvFtsd7WLUKh-DcYTS (org.eclipse.rcp.feature.group 3.6.0.v20100519-9OArFKvFtsd7WLUKh-DcYTS) To: com.ibm.icu [4.2.1.v20100412] Cannot satisfy dependency: From: Eclipse RCP 3.6.1.r361_v20100827-9OArFLdFjY-ThSQXmKvKz0_T (org.eclipse.rcp.feature.group 3.6.1.r361_v20100827-9OArFLdFjY-ThSQXmKvKz0_T) To: com.ibm.icu [4.2.1.v20100412] What can I do to solve this?

    Read the article

  • Matlab computations done over Apple Filing Protocol (AFP) depend on POSIX permissions, ignores ACLs

    - by flumignan
    I'm a system administrator and have never used Matlab, so forgive my general ignorance of the program. My users have encountered problems when executing scripted Matlab actions over AFP to a Mac OS X Server 10.6.7 where the access control list (ACL) should allow actions, but the POSIX-style permissions disallow the activity. It seems as if Matlab, run locally on the Mac workstations on datasets on the remote server, ignores the ACLs entirely. This is the only application I've ever seen behave this way. The server's filesystem is HFS+J and all other activity is performing as expected. These users cannot use CIFS because of our integration with external directory systems. In this example, the directory bxdata, the members of the group cibturner should be able to modify the files. Indeed, they can using any other method except via Matlab scripts. When the Matlab script hits these files, the POSIX permissions of 644 disallow modification. It's as if the ACLs are irrelevant. [root@cib 16:00:24 /14181.2_5sM]# ls -leh@ bxdata/ total 128 -rw-r--r--+ 1 kel32 staff 18K Feb 15 09:31 TS-5sMath030708-21073-1.edat 0: group:cibturner inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown 1: group:cibsrlocaladmins inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown 2: group:crcservergroup inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown -rw-r--r--+ 1 kel32 staff 25K Feb 15 09:31 TS-5sMath030708-21073-1.txt 0: group:cibturner inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown 1: group:cibsrlocaladmins inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown 2: group:crcservergroup inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown Because this server has HIPAA data, security is critical. We are not using networked home directories or SAN technology. The MatLab program is run on the user's hard drive; access is granted via Kerberized AFP.

    Read the article

  • Advanced Linux file permission question (ownership change during write operation)

    - by Kent
    By default the umask is 0022: usera@cmp$ touch somefile; ls -l total 0 -rw-r--r-- 1 usera usera 0 2009-09-22 22:30 somefile The directory /home/shared/ is meant for shared files and should be owned by root and the shared group. Files created here by usern (any user) are automatically owned by the shared group. There is a cron-job taking care of changing owning user and owning group (of any moved files) once per day: usera@cmp$ cat /etc/cron.daily/sharedscript #!/bin/bash chown -R root:shared /home/shared/ chmod -R 770 /home/shared/ I was writing a really large file to the shared directory. It had me (usera) as owning user and the shared group as group owner. During the write operation the cron job was run, and I still had no problem completing the write process. You see. I thought this would happen: I am writing the file. The file permissions and ownership data for the file looks like this: -rw-r--r-- usera shared The cron job kicks in! The chown line is processed and now the file is owned by the root user and the shared group. As the owning group only has read access to the file I get a file write error! Boom! End of story. Why did the operation succeed? A link to some kind of reference documentation to back up the reason would be very welcome (as I could use it to study more details).

    Read the article

  • How do I set up a shared directory on Linux?

    - by JR Lawhorne
    I have a linux server I want to use to share files between users in my company. Users will access the machine with sftp or secure shell. Here is what I have: cd /home ls -l drwxrwsr-x 5 userA staff 4096 Jul 22 15:00 shared (other listings omitted) I want all users in the staff group to be able to create, modify, delete any file and/or directory in the shared folder. I don't want anyone else to have access to the folder at all. I have: Added the users to the staff group by modifying /etc/group and running grpconv to update /etc/gshadow Run chown -R userA.staff /home/shared Run chmod -R 2775 /home/shared Now, users in the staff group can create new files but they aren't allowed to open the existing files in the directory for edit. I suspect this is due to the primary group id associated with each user which is still set to be the group created when the user was created. So, the PGID of user 'userA' is 'userA'. I'd rather not change the primary group of the users to 'staff' if I can help it but if it is the easiest option, I would consider it. And, a variation on a theme, I'd like to do this same thing with another directory but also allow the apache user to read files in the directory and serve them. What's the best way to set this up?

    Read the article

  • Local references to old server name remain after Windows 2003 server rename

    - by imagodei
    I have a standalone Win 2003 server with Windows Sharepoint Services (WSS3) running on it. I had to rename the server and I had bunch of problems resulting from this. Note that the server is not in AD environment. Most obvious problems were with Sharepoint, which didn't work. I was somewhat naive to think it will work in the first place, but OK - I've solved this using step 1 & 3 from this site (TNX) Other curious behavior/problems remain. Most disturbing is that Sharepoint isn't able to send email notifications to participants. I noticed there are several references to old server name everywhere I look: in Registry, in Windows Internal Database (MICROSOFT##SSEE). I see instances of old server name in the Sharepoint Central Administration - Operations - Servers in farm. There is reference to a servers: oldname.domain.local oldname.local On one of those servers there is also Windows SharePoint Services Outgoing E-Mail Service (Stopped). Also, when I try to telnet locally to the mail server (Simple Mail Transfer Protocol (SMTP) service), I get a response: 220 oldname.domain.local Microsoft ESMTP MAIL Service, Version: 6.0.3790.4675 ready at Tue, 15 Jun 2010 13:56:19 +0200 IMO these strange naming problems are also the reason why email notifications from within Sharepoint don't work. Can anyone tell me how to correct/replace those references to oldservername? Why is the email service insisting on old name? Of course I would like to try it without reinstalling the server. TNX!

    Read the article

  • Eclipse: Cannot install CDT because of a conflicting dependency

    - by MarkZar
    my eclipse has been configured for Java and pydev, now i want to configure C/C++ development tools with Eclipse. i dont want to download the whole Eclipse IDE for C/C++ Developers, for it is not convenient. so i decided to install CDT in my Eclipse. Help == Install New Software, then input http://download.eclipse.org/tools/cdt/releases/indigo, waited for a while, and chose the following CDT Main Features, CDT Optional Features, and Next, then an error occurred. Cannot complete the install because of a conflicting dependency. Software being installed: C/C++ DSF GDB Debugger Integration 4.0.0.201106081058 (org.eclipse.cdt.gnu.dsf.feature.group 4.0.0.201106081058) Software being installed: C/C++ Development Tools SDK 8.0.2.201202111925 (org.eclipse.cdt.sdk.feature.group 8.0.2.201202111925) Only one of the following can be installed at once: GDB DSF Debugger Integration Core 4.0.0.201106081058 (org.eclipse.cdt.dsf.gdb 4.0.0.201106081058) GDB DSF Debugger Integration Core 4.0.2.201202111925 (org.eclipse.cdt.dsf.gdb 4.0.2.201202111925) GDB DSF Debugger Integration Core 4.0.1.201109151620 (org.eclipse.cdt.dsf.gdb 4.0.1.201109151620) Cannot satisfy dependency: From: C/C++ Development Tools 8.0.2.201202111925 (org.eclipse.cdt.feature.group 8.0.2.201202111925) To: org.eclipse.cdt.gnu.dsf.feature.group [4.0.1.201202111925] Cannot satisfy dependency: From: C/C++ DSF GDB Debugger Integration 4.0.0.201106081058 (org.eclipse.cdt.gnu.dsf.feature.group 4.0.0.201106081058) To: org.eclipse.cdt.dsf.gdb [4.0.0.201106081058] Cannot satisfy dependency: From: C/C++ DSF GDB Debugger Integration 4.0.1.201202111925 (org.eclipse.cdt.gnu.dsf.feature.group 4.0.1.201202111925) To: org.eclipse.cdt.dsf.gdb [4.0.2.201202111925] Cannot satisfy dependency: From: C/C++ Development Tools SDK 8.0.2.201202111925 (org.eclipse.cdt.sdk.feature.group 8.0.2.201202111925) To: org.eclipse.cdt.feature.group [8.0.2.201202111925] i have googled for a lot of time, but still cannot find a valid solution. can anyone give a hand to me? thanks a lot!

    Read the article

  • jquery creating stacked bar chart with flot?

    - by KittyYoung
    I'm using jquery flot and I'm trying to create a stacked bar chart, but I'm having some syntax issues... I'll post my code at the end of this, but I'm quite certain it's wrong. I do get a stacked bar chart, but there's only three columns... Basically, here is the data that I'm working with and what I want to accomplish... The first group (Focus Group 1) on each line is the bottom bar of the stacked bar, the second group (Focus Group 2) is the second, and the third group (Focus Group 3) is the top group. The "Responses" are what I want to use on the x-axis, the first number in each set is x, and the second number is y. Response1, [0, 0], [0,0], [0,9] Response2, [1, 5], [1,5], [1,11] Response3, [2, 2], [2,0], [2,8] Response4, [3, 1], [3,2], [3,6] Response5, [4, 0], [4,0], [4,7] I should also mention, that I'm not sure if a stacked chart is the best way to go... Admittedly, I'm not a very visual person, and generally find charts annoying... If there's a better way to present this data, then I am so totally open to suggestions... Essentially... I have a series of questions. Each of these questions were presented to three focus groups. Members of the focus groups selected a response. I'm trying to present the count per response, per focus group, for each question. I thought that a stacked chart would be the best way to go, but again, I'm open to other ways of doing this. The only thing is, I definitely need a visual representation of the data....

    Read the article

  • script to find "deny" ACE in ACLs, and remove it

    - by Tom
    On my 100TB cluster, I need to find dirs and files that have a "deny" ACE within their ACL, then remove that ACE on each instance. I'm using the following: # find . -print0 | xargs -0 ls -led | grep deny -B4 and get this output (partial, for example only) -r--rw---- 1 chris GroupOne 4096 Mar 6 18:12 ./directoryA/fileX.txt OWNER: user:chris GROUP: group:GroupOne 0: user:chris allow file_gen_read,std_write_dac,file_write_attr 1: user:chris deny file_write,append,file_write_ext_attr,execute -- -r--rwxrwx 1 chris GroupOne 14728221 Mar 6 18:12 ./directoryA/subdirA/fileZ.txt OWNER: user:chris GROUP: group:GroupOne 0: user:chris allow file_gen_read,std_write_dac,file_write_attr 1: user:chris deny file_write,append,file_write_ext_attr,execute -- OWNER: user:bob GROUP: group:GroupTwo 0: user:bob allow dir_gen_read,dir_gen_write,dir_gen_execute,std_write_dac,delete_child,object_inherit,container_inherit 1: group:GroupTwo allow std_read_dac,std_write_dac,std_synchronize,dir_read_attr,dir_write_attr,object_inherit,container_inherit 2: group:GroupTwo deny list,add_file,add_subdir,dir_read_ext_attr,dir_write_ext_attr,traverse,delete_child,object_inherit,container_inherit -- As you can see, depending on where the "deny" ACE is, I can see/not-see the path. I could increase the -B value (I've seen up to 8 ACEs on a file) but then I would get more output to distill from... What I need to do next is extract $ACENUMBER and $PATHTOFILE so that I can execute this command: chmod -a# $ACENUMBER $PATHTOFILE Additional issue is that the find command (above) gives a relative path, whereas I need the full path. I guess that would need to be edited somehow. Any guidance on how to accomplish this?

    Read the article

  • CakePHP's list problem

    - by jun
    Hi there. I have this table in my DB: Group - ID-Name - 1 -abc - 2 -def - 3 -ghi Pages - id-group_id-name - 1 -1 -home - 2 -1 -about us Now I wanted to make a select box that groups them by 'group' using: function add() { $this->set('pages', $this->Page->find('list', array('fields' => array('Page.id', 'Page.name', 'Page.group_id')))); } In my add.ctp: echo $form->input('group_id', array('options' => $pages)); The output: <select name="data[Page][id]" id="PageId"> <optgroup label="1"> <option value="1">Home</option> <option value="2">About Us</option> </optgroup> </select> I wanted the optgroup to display the actual group name not the group id like: <select name="data[Page][id]" id="PageId"> <optgroup label="abc"> <option value="1">Home</option> <option value="2">About Us</option> </optgroup> </select> I have tried this one: $this->Page->find('list', array('conditions' => 'Group.id = Page.id', 'fields' => array('Page.id', 'Page.name', 'Group.name'))); But 'Group.id' and 'Group.name' is unknown. Thanks!

    Read the article

  • nhibernate error recovery

    - by Berryl
    I downloaded Rhino Security today and started going through some of the tests. Several that run perfectly in isolation start getting errors after one that purposely raises an exception runs though. Here is that test: [Test] public void EntitesGroup_CanCreate() { var group = _authorizationRepository.CreateEntitiesGroup("Accounts"); _session.Flush(); _session.Evict(group); var fromDb = _session.Get<EntitiesGroup>(group.Id); Assert.NotNull(fromDb); Assert.That(fromDb.Name, Is.EqualTo(group.Name)); } And here are the tests and error messages that fail: [Test] public void User_CanSave() { var ayende = new User {Name = "ayende"}; _session.Save(ayende); _session.Flush(); _session.Evict(ayende); var fromDb = _session.Get<User>(ayende.Id); Assert.That(fromDb, Is.Not.Null); Assert.That(ayende.Name, Is.EqualTo(fromDb.Name)); } ----> System.Data.SQLite.SQLiteException : Abort due to constraint violation column Name is not unique [Test] public void UsersGroup_CanCreate() { var group = _authorizationRepository.CreateUsersGroup("Admininstrators"); _session.Flush(); _session.Evict(group); var fromDb = _session.Get<UsersGroup>(group.Id); Assert.NotNull(fromDb); Assert.That(fromDb.Name, Is.EqualTo(group.Name)); } failed: NHibernate.AssertionFailure : null id in Rhino.Security.Tests.User entry (don't flush the Session after an exception occurs) Does anyone see how I can reset the state of the in memory SQLite db after the first test? I changed the code to use nunit instead of xunit so maybe that is part of the problem here as well. Cheers, Berryl

    Read the article

< Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >