Search Results

Search found 1148 results on 46 pages for 'capacity'.

Page 17/46 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • How can I switch memory modules to 1600 Mhz?

    - by Salvador
    Some months ago I bought 4 Memory modules of 4GB DDR3 1600 KINGSTON HYPERX. The official Kingston manual says: *This module has been tested to run at DDR3-1600 at a low latency timing of 9-9-9-27 at 1.65V.The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9. I cannot find which is the real speed of my memory modules. I normally get from several tools that the real speed is 1333 Mhz srs@ubuntu:~$ sudo dmidecode -t memory # dmidecode 2.9 SMBIOS 2.6 present. Handle 0x005D, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 32 GB Error Information Handle: 0x005F Number Of Devices: 4 Handle 0x005C, DMI type 17, 28 bytes Memory Device Array Handle: 0x005D Error Information Handle: 0x0060 Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: ChannelA-DIMM0 Bank Locator: BANK 0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 1333 MHz (0.8 ns) Manufacturer: Kingston Serial Number: 07288F23 Asset Tag: 9876543210 Part Number: 9905403-439.A00LF How can I switch memory modules to 1600 Mhz?

    Read the article

  • Ideas for reducing storage needs and/or costs (lots of images)

    - by James P.
    Hi, I'm the webmaster for a small social network and have noticed that images uploaded by users are taking a big portion of the capacity available. These are mostly JPEGs. What solutions could I apply to reduce storage needs? Is there a way to reduce the size of images without affecting quality too much? Is there a service out there that could be used to store static files at a cheaper price (< 1GB/0.04 eurocents)? Edit: Updated the question.

    Read the article

  • What programming language and framework has best support for agile web development?

    - by Jonas
    If I would like to quickly set up a modern website, what programming language + framework has best support for this? E.g. short and easy to understand code for a beginner and a framework with support for modern features. Disregard my current knowledge, I'm more interested in the capacity of web programming languages and frameworks. Some requirements: RESTful URIs: http://example.com/category/id/page-title similar to the urls here on Programmers. ORM. A framework that has good database support and provide ORM or maybe a NoSQL-database. Good support for RESTful WebServices. Good support for testing and unit testing, to make sure the site is working as planned. Preferably a site that is ready to scale with an increasing number of users.

    Read the article

  • Proposal for a new position at work

    - by Seth P.
    I have an idea at work for a new Product Manager position at our office. I work with several developers, and it would be helpful to have someone working in a type of "Scrum Master" capacity, dividing out assignments and making sure they get complete. This position does not currently exist, however I feel that I have enough evidence to indicate that it be very helpful for our business. What is the best way to present this proposal to my boss? Is there a specific template that you know of for new position? It should be able to describe the qualification for the position, their responsibilities, and what metrics we would use to measure them. Thanks. UPDATE++++ With Anna's suggestion, I gave more details about this specific position. However, I would ideally like the most generic way to present a new position to my boss.

    Read the article

  • Week in Geek: New Security Hole Found Just Hours After Latest Java Update Released

    - by Asian Angel
    Our first edition of WIG for September is filled with news link coverage on topics such as Firefox 16 Beta introduces new command line feature for developers, Google to restore passwords lost using Chrome iOS app, new password stealing malware is targeting Linux & Mac OS X users, and more. Special Note: The title refers to the latest security update of Java just released this past Thursday. Please refer to our article on disabling Java here. Skull and crosshair targeting scope clipart courtesy of Clker.com. HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? Java is Insecure and Awful, It’s Time to Disable It, and Here’s How

    Read the article

  • Dropbox Doubling the Storage of Their Pro Accounts Tonight Free of Charge

    - by Jason Fitzpatrick
    If you’re a Dropbox Pro user (or have been contemplating getting a Dropbox Pro account) today is your lucky day. Dropbox has overhauled their pricing structure, effectively doubling the storage capacity of their Pro account with nary a price increase in sight. Starting later today (keep an eye on the Dropbox Plans page for the change) the Pro 50GB and 100GB plans will shift to Pro 100GB and 200GB plans, doubling the amount of storage users enjoy without an increase in price. Hit up the link below for more info. New Dropbox Plans! [The Dropbox Blog] How to Play Classic Arcade Games On Your PC How to Use an Xbox 360 Controller On Your Windows PC Download the Official How-To Geek Trivia App for Windows 8

    Read the article

  • Where did my free space go?

    - by Ari B. Friedman
    I have a storage drive (2TB) and an OS drive (90GB SSD). I've run out of space on the OS drive: /$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sdb1 72G 72G 0 100% / udev 5.9G 12K 5.9G 1% /dev tmpfs 2.4G 1.2M 2.4G 1% /run none 5.0M 0 5.0M 0% /run/lock none 5.9G 428K 5.9G 1% /run/shm /dev/sda1 1.9T 639G 1.2T 37% /media/StorageDrive So be it. But when I attempt to figure out where the space has gone, I cannot find it anything remotely approaching the capacity of the drive: /$ sudo du -h -d 1 du: cannot access `./media/StorageDrive/home/ari/.gvfs': Permission denied 675G ./media 2.3G ./var 0 ./proc 7.0M ./tmp 27M ./boot 4.0K ./lib64 12K ./dev 44M ./home 16K ./lost+found 8.0M ./sbin 223M ./lib 4.0K ./selinux 1.4M ./run 140K ./root 8.8M ./bin 4.0K ./mnt 38M ./etc 8.0K ./srv 4.8G ./usr 65M ./opt 0 ./sys 682G . Note the difference between the total (682G) and the mounted drives in /media (675G) is only about 9G. How are 72G being used? Where is this dark matter hiding?

    Read the article

  • External USB 3 drive not recognized

    - by ilan123
    Ubuntu 12.10 64 bit seems not to recognize my external hard disk. It is a Vantec NST-310S3 external disk enclosure with a WD 3TB drive. The disk has two NTFS partitions. My PC is a dual boot system. Under Windows 7 the hard disk works fine but I can't make it work with Ubuntu. When the drive is connected to the PC then the command sudo fdisk -l seems to hang forever. Below are the output of lsusb and cat /proc/partitions without the external drive and then with it connected. I added also the last lines of the dmesg command at the end. First without the drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 Second with the USB 3 drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 8 16 2930266584 sdb ilan@linux:~$ lsusb -v -s 004:002 Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x55aa bcdDevice 1.00 iManufacturer 2 iProduct 3 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 44 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 ilan@linux:~$ sudo fdisk -l [sudo] password for ilan: Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf1b4f1ee Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1258293247 629043200 7 HPFS/NTFS/exFAT /dev/sda3 1258293248 1992296447 367001600 7 HPFS/NTFS/exFAT /dev/sda4 1992298494 3907028991 957365249 f W95 Ext'd (LBA) /dev/sda5 1992298496 2936016895 471859200 7 HPFS/NTFS/exFAT /dev/sda6 2936018944 3250591743 157286400 7 HPFS/NTFS/exFAT /dev/sda7 3250593792 3898824703 324115456 83 Linux /dev/sda8 3898826752 3907028991 4101120 82 Linux swap / Solaris dmesg output after connecting the external drive: [ 23.740567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.740786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.144673] usb 4-1: >new SuperSpeed USB device number 2 using xhci_hcd [ 49.163039] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 49.166789] usb 4-1: >New USB device found, idVendor=174c, idProduct=55aa [ 49.166793] usb 4-1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 49.166796] usb 4-1: >Product: AS2105 [ 49.166799] usb 4-1: >Manufacturer: ASMedia [ 49.166801] usb 4-1: >SerialNumber: 0123456789ABCDEF [ 49.206372] usbcore: registered new interface driver uas [ 49.228891] Initializing USB Mass Storage driver... [ 49.229042] scsi6 : usb-storage 4-1:1.0 [ 49.229115] usbcore: registered new interface driver usb-storage [ 49.229116] USB Mass Storage support registered. [ 64.045528] scsi 6:0:0:0: >Direct-Access WDC WD30 EZRX-00MMMB0 80.0 PQ: 0 ANSI: 0 [ 64.046224] sd 6:0:0:0: >Attached scsi generic sg2 type 0 [ 64.046881] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.047610] sd 6:0:0:0: >[sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 64.048368] sd 6:0:0:0: >[sdb] Write Protect is off [ 64.048373] sd 6:0:0:0: >[sdb] Mode Sense: 23 00 00 00 [ 64.048984] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.048987] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 64.049297] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.050942] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.050944] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 94.245006] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 94.262553] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 94.263805] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 94.263808] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40 [ 125.262722] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 125.280304] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 125.281511] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 125.281516] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40

    Read the article

  • How to setup ATI Mobility Radeon HD 4650?

    - by Thi An
    I'm currently using Ubuntu 12.04 64bit. After installing ATI/AMD proprietary FGLRX graphics drivers via Additional Drivers, I checked the status of my VGA card using lspci -v. Here's the output: 02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI M96 [Mobility Radeon HD 4650] (prog-if 00 [VGA controller]) Subsystem: Dell Device 0456 Flags: bus master, fast devsel, latency 0, IRQ 46 Memory at d0000000 (32-bit, prefetchable) [size=256M] I/O ports at 2000 [size=256] Memory at cfef0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at cfe00000 [disabled] [size=128K] Capabilities: Kernel driver in use: fglrx_pci Kernel modules: fglrx, radeon As mentioned in the title, my VGA card is 1GB and yet my computer only recognizes 256MB. My question is: "How to make my computer fully recognize the capacity of my ATI Mobility Radeon HD 4650 (1GB)?"

    Read the article

  • Oracle NoSQL könyv ingyen

    - by Lajos Sarecz
    Ritkán fordul elo, hogy ingyenesen érheto el egy Oracle Press könyv, de erre most sor került. Ingyenesen letöltheto a  Getting Started with Oracle NoSQL Database könyv az Oracle Press oldaláról.  A könyv az alábbi fejezeteket tartalmazza: Overview of Oracle NoSQL Database and Big Data Introducing Oracle NoSQL Database Oracle NoSQL Database Architecture Oracle NoSQL Database Installation and Configuration Getting Started with Oracle NoSQL Database Development Reading and Writing Data Advanced Programming Concepts: Avro Schemas and Bindings Capacity Planning and Sizing Advanced Topics Fontos infó, hogy iPad-en iBooks-ban megnyitva a teljes könyvet le kell tölteni. Sajnos nem számíthatunk túl gyors letöltésre, noha csupán 71 oldalas könyvrol van szó.

    Read the article

  • Atheros Wireless card shows up as two different models?

    - by geermc4
    Hi I've been fighting these wireless drivers for a few days and just recently i noticed that the model the Wireless controller appears in lspci is different sometimes. This is the data i have after installing Ubuntu Server 64 bit ~# lspci -k .... 04:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: AzureWave Device 1d89 Kernel driver in use: ath9k Kernel modules: ath9k ran some updates, restarted, all was good, all though it did say that linux-headers-server linux-image-server linux-server where beeing kept back. After that i installed ubuntu-desktop (aptitude install ubuntu-desktop --without-recommends) restarted and not only is the wireless not working anymore, but the hardware is listed as a different card ~# lspci -k .... 04:00.0 Ethernet controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) has no available drivers for it, still i tried to modprobe ath9k, they show up in lsmod as loaded, but still iw list shows nothing. this is what it looked like before the ubuntu-desktop instalation Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 2412 MHz [1] (14.0 dBm) * 2417 MHz [2] (15.0 dBm) * 2422 MHz [3] (15.0 dBm) * 2427 MHz [4] (15.0 dBm) * 2432 MHz [5] (15.0 dBm) * 2437 MHz [6] (15.0 dBm) * 2442 MHz [7] (15.0 dBm) * 2447 MHz [8] (15.0 dBm) * 2452 MHz [9] (15.0 dBm) * 2457 MHz [10] (15.0 dBm) * 2462 MHz [11] (15.0 dBm) * 2467 MHz [12] (15.0 dBm) (passive scanning) * 2472 MHz [13] (14.0 dBm) (passive scanning) * 2484 MHz [14] (17.0 dBm) (passive scanning) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x1 RX 0x3 Configured Antennas: TX 0x1 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor interface combinations are not supported Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * connect * disconnect Supported TX frame types: * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 Supported RX frame types: * IBSS: 0x00d0 * managed: 0x0040 0x00d0 * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * mesh point: 0x00b0 0x00c0 0x00d0 * P2P-client: 0x0040 0x00d0 * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 Device supports RSN-IBSS. What's with the hardware change? If it has 2, how can i make the AR9285 always load and disable AR5008, or, is it the same and it's just showing it different? :| Oh and I've tried this on Ubuntu 10.04 server, xubuntu 12.04, ubuntu 12.04 desktop and server. Thanks in advanced. -- Here's some more info, i have it setup in 2 hard drives, 1 works and the other one i'm using to figure it out The one that works... # lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: 54:04:a6:a3:3b:96 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.147 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:43 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 01 serial: 74:2f:68:4a:26:73 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-18-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:fea00000-fea0ffff Here's where it doesn't # lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: 54:04:a6:a3:3b:96 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.160 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:43 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff *-network UNCLAIMED description: Ethernet controller product: AR5008 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:fea00000-fea0ffff Update I've noticed that if i blacklist the ath9k and ath9k_common modules lspci gives me the AR9285, but then I need to modprobe ath9k for it to work, does this make any sense? If so, why?

    Read the article

  • Extended FindWindow

    - by João Angelo
    The Win32 API provides the FindWindow function that supports finding top-level windows by their class name and/or title. However, the title search does not work if you are trying to match partial text at the middle or the end of the full window title. You can however implement support for these extended search features by using another set of Win32 API like EnumWindows and GetWindowText. A possible implementation follows: using System; using System.Collections.Generic; using System.Linq; using System.Runtime.InteropServices; using System.Text; public class WindowInfo { private IntPtr handle; private string className; internal WindowInfo(IntPtr handle, string title) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); this.Handle = handle; this.Title = title ?? string.Empty; } public string Title { get; private set; } public string ClassName { get { if (className == null) { className = GetWindowClassNameByHandle(this.Handle); } return className; } } public IntPtr Handle { get { if (!NativeMethods.IsWindow(this.handle)) throw new InvalidOperationException("The handle is no longer valid."); return this.handle; } private set { this.handle = value; } } public static WindowInfo[] EnumerateWindows() { var windows = new List<WindowInfo>(); NativeMethods.EnumWindowsProcessor processor = (hwnd, lParam) => { windows.Add(new WindowInfo(hwnd, GetWindowTextByHandle(hwnd))); return true; }; bool succeeded = NativeMethods.EnumWindows(processor, IntPtr.Zero); if (!succeeded) return new WindowInfo[] { }; return windows.ToArray(); } public static WindowInfo FindWindow(Predicate<WindowInfo> predicate) { WindowInfo target = null; NativeMethods.EnumWindowsProcessor processor = (hwnd, lParam) => { var current = new WindowInfo(hwnd, GetWindowTextByHandle(hwnd)); if (predicate(current)) { target = current; return false; } return true; }; NativeMethods.EnumWindows(processor, IntPtr.Zero); return target; } private static string GetWindowTextByHandle(IntPtr handle) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); int length = NativeMethods.GetWindowTextLength(handle); if (length == 0) return string.Empty; var buffer = new StringBuilder(length + 1); NativeMethods.GetWindowText(handle, buffer, buffer.Capacity); return buffer.ToString(); } private static string GetWindowClassNameByHandle(IntPtr handle) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); const int WindowClassNameMaxLength = 256; var buffer = new StringBuilder(WindowClassNameMaxLength); NativeMethods.GetClassName(handle, buffer, buffer.Capacity); return buffer.ToString(); } } internal class NativeMethods { public delegate bool EnumWindowsProcessor(IntPtr hwnd, IntPtr lParam); [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] public static extern bool EnumWindows( EnumWindowsProcessor lpEnumFunc, IntPtr lParam); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetWindowText( IntPtr hWnd, StringBuilder lpString, int nMaxCount); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetWindowTextLength(IntPtr hWnd); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetClassName( IntPtr hWnd, StringBuilder lpClassName, int nMaxCount); [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] public static extern bool IsWindow(IntPtr hWnd); } The access to the windows handle is preceded by a sanity check to assert if it’s still valid, but if you are dealing with windows out of your control then the window can be destroyed right after the check so it’s not guaranteed that you’ll get a valid handle. Finally, to wrap this up a usage, example: static void Main(string[] args) { var w = WindowInfo.FindWindow(wi => wi.Title.Contains("Test.docx")); if (w != null) { Console.Write(w.Title); } }

    Read the article

  • How to Upgrade an existing Customer from OBI10g to 11g: Live Virtual Class

    - by Mike.Hallett(at)Oracle-BI&EPM
    This Live Virtual Class eSeminar on upgrading to Oracle Business Intelligence Enterprise Edition 11g, from OBI 10g, is FREE for Oracle Partners. When : Thursday, January 5, 2012 @ 14.00 CET  / 13.00 UK (120 Minute eSeminar) Where : Goto REGISTER HERE During this session you will learn: OBIEE 11g Infrastructure – What Is Different From OBIEE 10g? Considerations During The Upgrade, Repository Metadata, Presentation Catalog, BI Publisher, BI Security Planning Your Upgrade Optimizing OBI 10g for an 11g Upgrade Copying OBI 10g to New Server Installing OBI 11g on New Server Running Upgrade Assistant & Running OBI 11g Post-Upgrade Steps Testing Upgrading Environment Capacity Planning Guide Q&A Who Should attend? Oracle partners with experience of OBIEE+ 10g BI and EPM developers, architects and implementers Oracle partners with Clients using OBI10g

    Read the article

  • Can't connect to WIFI after sleep Ubuntu 14.04

    - by user3380404
    After an upgrade over a previous version to Ubuntu 14.04 I have problems with connecting to WiFi. After suspending it won't reconnect to any existing network unless I restart the laptop. sudo lshw -C network: *-network description: Ethernet interface product: 82567LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 03 serial: 00:27:13:b4:d3:58 capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k firmware=1.8-3 latency=0 link=no multicast=yes port=twisted pair resources: irq:45 memory:fc200000-fc21ffff memory:fc225000-fc225fff ioport:1840(size=32) *-network description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:26:c6:c6:6b:c8 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-29-generic firmware=8.83.5.1 build 33692 ip=10.0.1.160 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:48 memory:f4200000-f4201fff

    Read the article

  • Get Hands On with Raspberry Pi via Free OS-Building Course

    - by Jason Fitzpatrick
    Cambridge University is now offering a free 12-segment course that will guide you through building an OS from scratch for the tiny Raspberry Pi development board–learn the ins and outs of basic OS design on the cheap. You’ll need a Raspberry Pi board, a computer running Windows, OS X, or Linux, and an SD card, as well as a small amount of free software. The 12-part tutorial starts you off with basic OS theory and then walks you through basic control of the board, graphics manipulation, and, finally, creating a command line interface for your new operating system. Hit up the link below to read more and check out the lessons. Baking Pi – Operating Systems Development HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows?

    Read the article

  • Two new features in November 2009 CTP

    - by kaleidoscope
    Windows Azure Diagnostics Managed Library: The new Diagnostics API enables logging using standard .NET APIs. The Diagnostics API provides built-in support for collecting standard logs and diagnostic information, including the Windows Azure logs, IIS 7.0 logs, Failed Request logs, crash dumps, Windows Event logs, performance counters, and custom logs. Variable-size Virtual Machines (VMs): Developers may now specify the size of the virtual machine to which they wish to deploy a role instance, based on the role's resource requirements. The size of the VM determines the number of CPU cores, the memory capacity, and the local file system size allocated to a running instance. e.g.: <WebRole name=”WebRole1” vmsize=”ExtraLarge”> Supported values for the ‘vmsize’ are: 1. Small 2. Medium 3. Large 4.       ExtraLarge More information for Diagnostics Managed Library can be found at: http://msdn.microsoft.com/en-us/library/ee758705.aspx   Girish, A

    Read the article

  • JavaOne Latin America Preview

    - by Tori Wieldt
    JavaOne Latin America 2011 is next week in Sao Paulo, Brazil and it promises to be full of information and fun for Java developers. It will include keynotes on Java strategy, Java technical developments, and what's happening in Java community. Java community members Bruno Souza, Fabiane Nardon and Vinicius Senger will be on stage for the community keynote, so I'm sure it will be entertaining! JavaOne Latin America also offers dozens of educational and hands-on sessions created by and for the Java community. From "What's Coming in #JMS 2.0" to "HotRockit: What to Expect from Oracle's Converged JVM," to "JavaEE Apps in Production: Tips and Tricks to achieve Zero Downtime" to "Corporate JavaFX: How to leverage JavaFX Corporate Desktop apps," developers are sure to fill their brains to capacity!To hear more about JavaOne Latin America, the community bike ride, and the Adopt-a-JSR program, watch this interview with Yara Senger, President of the SouJava JUG, taped live at Devoxx 2011.

    Read the article

  • How to deal with project managers who micromanage?

    - by entens
    Perhaps I'm just naive, but when I try to decipher the wall of tasks I'm targeted to do over the course of a week, I just can't help but think whoever builds the project schedule needs to get some remedial training on basic project management. For example, I am assigned 13 tasks today, the shortest lasting .13 days (default time metric in Microsoft Project), and the longest lasting .75 days. I can't help but think that it is blatant micromanagement scheduling projects in sub 10 minute intervals. The effects of management are becoming evident in slipped tasks, resource assignment exceeding capacity by a factor of two at some points in time, and spending more time clearing tasks and figuring out what comes next than actually doing work. How can I convince the project manager to create tasks with larger duration and to see the larger picture?

    Read the article

  • Connectify Dispatch Links Multiple Network Nodes Into a Mega Connection

    - by Jason Fitzpatrick
    Connectify Dispatch wants to change the way you interact with the networks around you by making it dead simple to mesh all available Wi-Fi, Cellular, and Ethernet connections into a massive and stable pipeline. Dispatch makes it open-and-click easy to hook up multiple Wi-Fi nodes, your cellphone, and even Ethernet connections into a single blended connection. While the video above gives a great overview of the process, check out the video below to see it in real world action: The project is currently in the last phase of KickStarter funding, so now is a great time to score Connectify Dispatch at a steep discount–pledging as little as $10 to fund the project, for example, scores you 50% of a 6-month Pro license. Hit up the link below to read more about the project, check the KickStarter status, and see all the neat features in the development pipeline. Dispatch: The Internet, Faster. [KickStarter] HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows?

    Read the article

  • DIY Mini-Studio Is a Sturdy and Cheap Photography Platform

    - by Jason Fitzpatrick
    Most DIY table top studios/light tents are designed to be packed down–this one is a permanent and sturdy fixture with a nice smooth cyclorama background. Courtesy of DIYer Nick Britsky, this stand-alone mini-studio features a nice solid frame for attaching lighting, flashes, and diffusion panels as well as a solid and smooth cyclorama-style background. Hit up the link below to see pictures of the build in progress, Nick’s solution for the background, and the Sketchup files so you can whip one up for your basement. DIY Mini Photo Studio [via Make] HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows?

    Read the article

  • Microsoft Prepares 64 GB Zune HD for Upcoming Release

    To hopefully increase its market share in the ever-competitive world of MP3 players Microsoft has announced that it will release the new 64 GB version of the Zune HD on April 12 2 1 . The 64 GB version of the Zune HD provides much more storage capacity than the previously-released 16 GB and 32 GB versions of the player that were released to the public in September of 2 9.... Business Productivity Online Suite From $10 per user per month. Includes a 12-month subscription. Min 5 seats.

    Read the article

  • Visual Studio 2010 & Windows Azure Launch

    If youre involved in any capacity with software development, or want to understand more about cloud computing, this is a half-day event not to be missed. Come along to the official New Zealand launch of Visual Studio 2010 and Windows Azure. Weve lined up two international experts, Sam Guckenheimer and David Chappell to deliver our two keynote sessions. Plus, to mark the occasion, were producing a very cool retro t-shirt for all attendees,...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Why isn't Startup Disk Creator working in 12.04?

    - by Steve Kelem
    I'm trying to create a bootable USB stick (7.5G) for Ubuntu 12.04 (x86_64) from another Ubuntu 12.04 x86_64 PC. I downloaded the Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425). When I run Make Startup Disk, I selected the downloaded release. The drive shows up with a capacity of 7.5GB and a blank space under "Free Space". I have tried using the "Erase Disk" button, which seems to erase the disk. The problem is that the options below the "Disk to use" section are grayed out. The "Make Startup Disk" is colored dull orange, while the source disc image and device to use are bright orange. The "Make Startup Disk" button doesn't do anything when I click it. The only working buttons are "Other...", "Erase Disk", and "Close". Upon using Other button to select the ISO, it allows to select the ISO but it doesn't load and the "Source Disk Image" field remains empty.

    Read the article

  • Best Practices - Dynamic Reconfiguration

    - by jsavit
    This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (formerly named Logical Domains) Overview of dynamic Reconfiguration Oracle VM Server for SPARC supports Dynamic Reconfiguration (DR), making it possible to add or remove resources to or from a domain (virtual machine) while it is running. This is extremely useful because resources can be shifted to or from virtual machines in response to load conditions without having to reboot or interrupt running applications. For example, if an application requires more CPU capacity, you can add CPUs to improve performance, and remove them when they are no longer needed. You can use even use Dynamic Resource Management (DRM) policies that automatically add and remove CPUs to domains based on load. How it works (in broad general terms) Dynamic Reconfiguration is done in coordination with Solaris, which recognises a hypervisor request to change its virtual machine configuration and responds appropriately. In essence, Solaris receives a message saying "you now have 16 more CPUs numbered 16 to 31" or "8GB more RAM starting at address X" or "here's a new network or disk device - have fun with it". These actions take very little time. Solaris then can start using the new resource. In the case of added CPUs, that means dispatching processes and potentially binding interrupts to the new CPUs. For memory, Solaris adds the new memory pages to its "free" list and starts using them. Comparable actions occur with network and disk devices: they are recognised by Solaris and then used. Removing is the reverse process: after receiving the DR message to free specific CPUs, Solaris unbinds interrupts assigned to the CPUs and stops dispatching process threads. That takes very little time. primary # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 1.0% 6d 22h 29m ldom1 active -n---- 5000 16 8G 0.9% 6h 59m primary # ldm set-core 5 ldom1 primary # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 0.2% 6d 22h 29m ldom1 active -n---- 5000 40 8G 0.1% 6h 59m primary # ldm set-core 2 ldom1 primary # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 1.0% 6d 22h 29m ldom1 active -n---- 5000 16 8G 0.9% 6h 59m Memory pages are vacated by copying their contents to other memory locations and wiping them clean. Solaris may have to swap memory contents to disk if the remaining RAM isn't enough to hold all the contents. For this reason, deallocating memory can take longer on a loaded system. Even on a lightly loaded system it took several 7 or 8 seconds to switch the domain below between 8GB and 24GB of RAM. primary # ldm set-mem 24g ldom1 primary # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 0.1% 6d 22h 36m ldom1 active -n---- 5000 16 24G 0.2% 7h 6m primary # ldm set-mem 8g ldom1 primary # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 0.7% 6d 22h 37m ldom1 active -n---- 5000 16 8G 0.3% 7h 7m What if the device is in use? (this is the anecdote that inspired this blog post) If CPU or memory is being removed, releasing it pretty straightforward, using the method described above. The resources are released, and Solaris continues with less capacity. It's not as simple with a network or I/O device: you don't want to yank a device out from underneath an application that might be using it. In the following example, I've added a virtual network device to ldom1 and want to take it away, even though it's been plumbed. primary # ldm rm-vnet vnet19 ldom1 Guest LDom returned the following reason for failing the operation: Resource Information ---------------------------------------------------------- ----------------------- /devices/virtual-devices@100/channel-devices@200/network@1 Network interface net1 VIO operation failed because device is being used in LDom ldom1 Failed to remove VNET instance That's what I call a helpful error message - telling me exactly what was wrong. In this case the problem is easily solved. I know this NIC is seen in the guest as net1 so: ldom1 # ifconfig net1 down unplumb Now I can dispose of it, and even the virtual switch I had created for it: primary # ldm rm-vnet vnet19 ldom1 primary # ldm rm-vsw primary-vsw9 If I had to take away the device disruptively, I could have used ldm rm-vnet -f but that could disrupt whoever was using it. It's better if that can be avoided. Summary Oracle VM Server for SPARC provides dynamic reconfiguration, which lets you modify a guest domain's CPU, memory and I/O configuration on the fly without reboot. You can add and remove resources as needed, and even automate this for CPUs by setting up resource policies. Taking things away can be more complicated than giving, especially for devices like disks and networks that may contain application and system state or be involved in a transaction. LDoms and Solaris cooperative work together to coordinate resource allocation and de-allocation in a safe and effective way. For best practices, use dynamic reconfiguration to make the best use of your system's resources.

    Read the article

  • My Ubuntu drive is running out of space, how to fix, something is wrong

    - by Jamie Flores
    I'm moving from windows and am having trouble figuring this out: I'm getting a message that pops up saying disk space is low. It says I have 800MB free. I click on the disk usage analyzer and it shows 24.6 total capacity and 22.5 used. When I look in GParted it shows a partition at 72.6GB where I have Ubuntu installed. It also shows that 70.65GB used and 1.94 free in that partition. How do I figure out what else is in that partition? It's the only ext4 format. What am I missing?

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >