Search Results

Search found 658 results on 27 pages for 'carry all'.

Page 17/27 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Misadventures at Radio Shack

    - by Chris Williams
    While I'm waiting for my Arduino kits to show up, I started reading the Getting Started With Arduino book from O'Reilly (review coming later) and I'm about 40 pages in when I get to a parts list for one of the first projects. Looks pretty straightforward, and even has Radio Shack part numbers next to almost everything. So on my lunch today, I decided to run out to "The Shack" (seriously, that's their rebranding?) to pick up some basics, like a couple resistors, a breadboard, a momentary switch and a pack of pre-cut jumper wires. I found the resistors without any difficulty, and while they didn't have the exact switch I wanted, it was easy enough to find one that would do. That's where my good luck abruptly ended. I was surprised that I couldn't find a breadboard or any jumper wires, so while I was looking around, a guy came up and asked me if I needed some help. I told him I did, explained what I needed and even gave him the Radio Shack part number for the pack of jumper wires. After a couple minutes he says he can't find anything in the system, which was unfortunate but not the end of the world.  So then I asked him about the breadboard, and he pointed me to some blank circuitboards (which are not the same thing) and I said (nicely) that those weren't breadboards and attempted to explain (again) what I needed, at which point he says to me "I don't even know what the hell you're looking for!" I stood there for a moment and tried to process his words. About that time, another salesperson came up and asked what I was trying to find. I told her I needed a breadboard, and she pointed to the blank circuit boards and said "they're right in front of you..." After seeing the look on my face, she thought for a minute and said... "OH! you mean those white things. We don't have those anymore." I thanked her, set everything down on the counter and left. (I wasn't going to buy only half the stuff I needed.. and I was pretty sure I was never going to be buying ANYTHING at that particular location ever again.) Guess I'll be ordering more stuff online at this point. It's a shame really, because I used to LOVE going to Radio Shack as a kid, and looking through all the cool electronics components and stuff, even if I didnt understand what most of them were at the time. Seems like the only thing they carry in any quantity/variety now is cell phones and random stereo connectors.

    Read the article

  • 80 Years of Supplier Misinformation: How can Oracle Supplier Hub Help?

    - by Mala Narasimharajan
    By Mark Peachy       Well, we're down to the final week before this year's Oracle Open World conference kicks-off on Sunday and there's still plenty of work to be done to be ready in time.  One of the great benefits I think that attendees get from Open World is the opportunity to listen to other organizations talk about their implementation experiences.  Typically, these sessions provide hugely valuable insights that have been gained during a deployment, delivering a wealth of practical information on what it really takes to get an organization up and running with a new module or a revamped business process.And I'm not just saying this because we're lucky enough to have one of our early implementers join us for this year's Supplier Hub/Supplier Lifecycle Management MDM session!  With a multi-phased deployment underway, this customer is working to fix a long, 80-year history without much in the way of formal processes or tools to manage all of their accumulated supplier information.  Faced with a mess of supplier details, they had been challenged to efficiently track supplier spend, monitor performance, maintain qualification information or carry out meaningful risk analysis.  Join us on Wednesday to hear how they are addressing these issues and the plans they have to evolve their supplier management techniques - it's a great story.CON9242:  Oracle Supplier Lifecycle Management and Oracle Supplier Hub for Better Supply Base Management Wednesday, October 3rd at 1:15 PM                                                                                                                                                InterContinental Hotel, Sutter Suite

    Read the article

  • Database unit testing is now available for SSDT

    - by jamiet
    Good news was announced yesterday for those that are using SSDT and want to write unit tests, unit testing functionality is now available. The announcement was made on the SSDT team blog in post Available Today: SSDT—December 2012. Here are a few thoughts about this news. Firstly, there seems to be a general impression that database unit testing was not previously available for SSDT – that’s not entirely true. Database unit testing was most recently delivered in Visual Studio 2010 and any database unit tests written therein work perfectly well against SQL Server databases created using SSDT (why wouldn’t they – its just a database after all). In other words, if you’re running SSDT inside Visual Studio 2010 then you could carry on freely writing database unit tests; some of the tight integration between the two (e.g. right-click on an object in SQL Server Object Explorer and choose to create a unit test) was not there – but I’ve never found that to be a problem. I am currently working on a project that uses SSDT for database development and have been happily running VS2010 database unit tests for a few months now. All that being said, delivery of database unit testing for SSDT is now with us and that is good news, not least because we now have the ability to create unit tests in VS2012. We also get tight integration with SSDT itself, the like of which I mentioned above. Having now had a look at the new features I was delighted to find that one of my big complaints about database unit testing has been solved. As I reported here on Connect a refactor operation would cause unit test code to get completely mangled. See here the before and after from such an operation: SELECT    * FROM    bi.ProcessMessageLog pml INNER JOIN bi.[LogMessageType] lmt     ON    pml.[LogMessageTypeId] = lmt.[LogMessageTypeId] WHERE    pml.[LogMessage] = 'Ski[LogMessageTypeName]of message: IApplicationCanceled' AND        lmt.[LogMessageType] = 'Warning'; which is obviously not ideal. Thankfully that seems to have been solved with this latest release. One disappointment about this new release is that the process for running tests as part of a CI build has not changed from the horrendously complicated process required previously. Check out my blog post Setting up database unit testing as part of a Continuous Integration build process [VS2010 DB Tools - Datadude] for instructions on how to do it. In that blog post I describe it as “fiddly” – I was being kind when I said that! @Jamiet

    Read the article

  • Architects, Leadership, and Influence

    - by Bob Rhubart
    Technical expertise is a given for architects. In addition to solid development experience, extensive knowledge of technical trends, tools, standards, and methodolgies (not to mention business accumen) provides the foundation for the decisions the architect must make in the effort to get all the pieces to work together. But even superior technical chops can't overcome a lack of leadership. Leadership is about influence: the ability to effectively communicate — to sell your ideas and defend your decisions in a manner that affects the decisions of the people around you. Leadership and influence are especially important in situations in which the architect may not have the authority to simply tell people what to do. And even when the architect has that kind of authority, influential leadership can mean the difference between gaining real buy-in and support from colleagues and stakeholders, and settling for their grudging acceptance (or worse). Guess which outcome is likely to produce the best results. In a previous post I presented some examples of the kind of criticism that is leveled at architects, a great deal of which can be attributed to a lack of leadership and influence on the part of the targets of that criticism. So it was serendipitous that I recently ran across a post on the Harvard Business Review blog written by Chris Musselwhite and Tammie Plouffe. That post, When Your Influence Is Ineffective, includes this: [I]nfluence becomes ineffective when individuals become so focused on the desired outcome that they fail to fully consider the situation. While the influencer may still gain the short-term desired outcome, he or she can do long-term damage to personal effectiveness and the organization, as it creates an atmosphere of distrust where people stop listening, and the potential for innovation or progress is diminished. The need to "see the big picture" is a grossly reductive assesement of the architect's responsibilities — but that doesn't mean it's not true. That big picture perspective must encompass both the technological elements of the architecture and the elements responsible for implementing those technologies in compliance with the prescribed architecture. Technologies may be tempermental, but they don't have personalities or egos, and they are unlikely to carry a grudge — not yet, anyway (Hello, Skynet!).  Effective leadership and the ability to influence people can help to ensure that all the pieces fit and that they work together, today and tomorrow.

    Read the article

  • Java JRE 1.6.0_35 Certified with Oracle E-Business Suite

    - by Steven Chan (Oracle Development)
    The latest Java Runtime Environment 1.6.0_35 (a.k.a. JRE 6u35-b10) is now certified with Oracle E-Business Suite Release 11i and 12 desktop clients.   What's new in Java 1.6.0_35?See the 1.6.0_35 Update Release Notes for details about what has changed in this release.  This release is available for download from the usual Sun channels and through the 'Java Automatic Update' mechanism. 32-bit and 64-bit versions certified This certification includes both the 32-bit and 64-bit JRE versions. 32-bit JREs are certified on: Windows XP Service Pack 3 (SP3) Windows Vista Service Pack 1 (SP1) and Service Pack 2 (SP2) Windows 7 and Windows 7 Service Pack 1 (SP1) 64-bit JREs are certified only on 64-bit versions of Windows 7 and Windows 7 Service Pack 1 (SP1). Worried about the 'mismanaged session cookie' issue? No need to worry -- it's fixed.  To recap: JRE releases 1.6.0_18 through 1.6.0_22 had issues with mismanaging session cookies that affected some users in some circumstances. The fix for those issues was first included in JRE 1.6.0_23. These fixes will carry forward and continue to be fixed in all future JRE releases.  In other words, if you wish to avoid the mismanaged session cookie issue, you should apply any release after JRE 1.6.0_22.All JRE 1.6 releases are certified with EBS upon release Our standard policy is that all E-Business Suite customers can apply all JRE updates to end-user desktops from JRE 1.6.0_03 and later updates on the 1.6 codeline.  We test all new JRE 1.6 releases in parallel with the JRE development process, so all new JRE 1.6 releases are considered certified with the E-Business Suite on the same day that they're released by our Java team.  You do not need to wait for a certification announcement before applying new JRE 1.6 releases to your EBS users' desktops. Important For important guidance about the impact of the JRE Auto Update feature on JRE 1.6 desktops, see: URGENT BULLETIN: All E-Business Suite End-Users Must Manually Apply JRE 6 Updates References Recommended Browsers for Oracle Applications 11i (Metalink Note 285218.1) Upgrading Sun JRE (Native Plug-in) with Oracle Applications 11i for Windows Clients (Metalink Note 290807.1) Recommended Browsers for Oracle Applications 12 (MetaLink Note 389422.1) Upgrading JRE Plugin with Oracle Applications R12 (MetaLink Note 393931.1) Related Articles Mismanaged Session Cookie Issue Fixed for EBS in JRE 1.6.0_23 Roundup: Oracle JInitiator 1.3 Desupported for EBS Customers in July 2009

    Read the article

  • Java JRE 1.6.0_37 Certified with Oracle E-Business Suite

    - by Steven Chan (Oracle Development)
    My apologies: this certification announcement got lost in the OpenWorld maelstorm.  Better late than never. The section below entitled, "All JRE 1.6 releases are certified with EBS upon release" should obviate the need for these announcements, but I know that people have gotten used to seeing these certifications referenced explicitly.  The latest Java Runtime Environment 1.6.0_37 (a.k.a. JRE 6u37-b06) is now certified with Oracle E-Business Suite Release 11i and 12 desktop clients.   What's new in Java 1.6.0_37?See the 1.6.0_37 Update Release Notes for details about what has changed in this release.  This release is available for download from the usual Sun channels and through the 'Java Automatic Update' mechanism. 32-bit and 64-bit versions certified This certification includes both the 32-bit and 64-bit JRE versions. 32-bit JREs are certified on: Windows XP Service Pack 3 (SP3) Windows Vista Service Pack 1 (SP1) and Service Pack 2 (SP2) Windows 7 and Windows 7 Service Pack 1 (SP1) 64-bit JREs are certified only on 64-bit versions of Windows 7 and Windows 7 Service Pack 1 (SP1). Worried about the 'mismanaged session cookie' issue? No need to worry -- it's fixed.  To recap: JRE releases 1.6.0_18 through 1.6.0_22 had issues with mismanaging session cookies that affected some users in some circumstances. The fix for those issues was first included in JRE 1.6.0_23. These fixes will carry forward and continue to be fixed in all future JRE releases.  In other words, if you wish to avoid the mismanaged session cookie issue, you should apply any release after JRE 1.6.0_22.All JRE 1.6 releases are certified with EBS upon release Our standard policy is that all E-Business Suite customers can apply all JRE updates to end-user desktops from JRE 1.6.0_03 and later updates on the 1.6 codeline.  We test all new JRE 1.6 releases in parallel with the JRE development process, so all new JRE 1.6 releases are considered certified with the E-Business Suite on the same day that they're released by our Java team.  You do not need to wait for a certification announcement before applying new JRE 1.6 releases to your EBS users' desktops. Important For important guidance about the impact of the JRE Auto Update feature on JRE 1.6 desktops, see: Planning Bulletin for JRE 7: What EBS Customers Can Do Today References Recommended Browsers for Oracle Applications 11i (Metalink Note 285218.1) Upgrading Sun JRE (Native Plug-in) with Oracle Applications 11i for Windows Clients (Metalink Note 290807.1) Recommended Browsers for Oracle Applications 12 (MetaLink Note 389422.1) Upgrading JRE Plugin with Oracle Applications R12 (MetaLink Note 393931.1) Related Articles Mismanaged Session Cookie Issue Fixed for EBS in JRE 1.6.0_23 Roundup: Oracle JInitiator 1.3 Desupported for EBS Customers in July 2009

    Read the article

  • Achieving decoupling in Model classes

    - by Guven
    I am trying to test-drive (or at least write unit tests) my Model classes but I noticed that my classes end up being too coupled. Since I can't break this coupling, writing unit tests is becoming harder and harder. To be more specific: Model Classes: These are the classes that hold the data in my application. They resemble pretty much the POJO (plain old Java objects), but they also have some methods. The application is not too big so I have around 15 model classes. Coupling: Just to give an example, think of a simple case of Order Header - Order Item. The header knows the item and the item knows the header (needs some information from the header for performing certain operations). Then, let's say there is the relationship between Order Item - Item Report. The item report needs the item as well. At this point, imagine writing tests for Item Report; you need have a Order Header to carry out the tests. This is a simple case with 3 classes; things get more complicated with more classes. I can come up with decoupled classes when I design algorithms, persistence layers, UI interactions, etc... but with model classes, I can't think of a way to separate them. They currently sit as one big chunk of classes that depend on each other. Here are some workarounds that I can think of: Data Generators: I have a package that generates sample data for my model classes. For example, the OrderHeaderGenerator class creates OrderHeaders with some basic data in it. I use the OrderHeaderGenerator from my ItemReport unit-tests so that I get an instance to OrderHeader class. The problem is these generators get complicated pretty fast and then I also need to test these generators; defeating the purpose a little bit. Interfaces instead of dependencies: I can come up with interfaces to get rid of the hard dependencies. For example, the OrderItem class would depend on the IOrderHeader interface. So, in my unit tests, I can easily mock the behaviour of an OrderHeader with a FakeOrderHeader class that implements the IOrderHeader interface. The problem with this approach is the complexity that the Model classes would end up having. Would you have other ideas on how to break this coupling in the model classes? Or, how to make it easier to unit-test the model classes?

    Read the article

  • June 2013 release of SSDT contains a minor bug that you should be aware of

    - by jamiet
    I have discovered what seems, to me, like a bug in the June 2013 release of SSDT and given the problems that it created yesterday on my current gig I thought it prudent to write this blog post to inform people of it. I’ve built a very simple SSDT project to reproduce the problem that has just two tables, [Table1] and [Table2], and also a procedure [Procedure1]: The two tables have exactly the same definition, both a have a single column called [Id] of type integer. CREATE TABLE [dbo].[Table1] (     [Id] INT NOT NULL PRIMARY KEY ) My stored procedure simply joins the two together, orders them by the column used in the join predicate, and returns the results: CREATE PROCEDURE [dbo].[Procedure1] AS     SELECT t1.*     FROM    Table1 t1     INNER JOIN Table2 t2         ON    t1.Id = t2.Id     ORDER BY Id Now if I create those three objects manually and then execute the stored procedure, it works fine: So we know that the code works. Unfortunately, SSDT thinks that there is an error here: The text of that error is: Procedure: [dbo].[Procedure1] contains an unresolved reference to an object. Either the object does not exist or the reference is ambiguous because it could refer to any of the following objects: [dbo].[Table1].[Id] or [dbo].[Table2].[Id]. Its complaining that the [Id] field in the ORDER BY clause is ambiguous. Now you may well be thinking at this point “OK, just stick a table alias into the ORDER BY predicate and everything will be fine!” Well that’s true, but there’s a bigger problem here. One of the developers at my current client installed this drop of SSDT and all of a sudden all the builds started failing on his machine – he had errors left right and centre because, as it transpires, we have a fair bit of code that exhibits this scenario.  Worse, previous installations of SSDT do not flag this code as erroneous and therein lies the rub. We immediately had a mass panic where we had to run around the department to our developers (of which there are many) ensuring that none of them should upgrade their SSDT installation if they wanted to carry on being productive for the rest of the day. Also bear in mind that as soon as a new drop of SSDT comes out then the previous version is instantly unavailable so rolling back is going to be impossible unless you have created an administrative install of SSDT for that previous version. Just thought you should know! In the grand schema of things this isn’t a big deal as the bug can be worked around with a simple code modification but forewarned is forearmed so they say! Last thing to say, if you want to know which version of SSDT you are running check my blog post Which version of SSDT Database Projects do I have installed? @Jamiet

    Read the article

  • How do you turn on the customizable gnome-panel features (like gnome-applets) in Precise?

    - by chriv
    I resurrected a broken laptop today. I took out the HDD, put it in a USB 3.0 enclosure, and created a VM that would use it. It was running lucid. I took a screenshot of the desktop before I started "do-release-upgrade", because from experience, I will never have my GUI back the way I want it again. I know how to install gnome-panel to get back the "Gnome Classic" session option. I know how to put my minimize, maximize, and close buttons back in the upper-right hand corner of windows (where they belong). I know how to use gdm instead of lightdm. Unity gets worse in every version (and the other desktop OS is going to be even worse with Metro). Here's what I don't know (in order of importance): 1. How do you make the panels in gnome (gnome-panel, to be precise) customizable again (like they were in older versions of Ubuntu)? 2. How do you install applets in the panels now (right-click is now ignored)? 3. How can you customize all of the window elements (like you could in older versions of Ubuntu)? I can't remember much about maverick, natty, or oneiric (except their names), so I don't know exactly when I lost these capabilities. Edit: (no screenshot), my StackExchange reputation (on other StackExchange sites) doesn't carry over to this site, so I can't post the screenshot. Take a look at the panels in the screen hot. They are nice, compact, and VERY functional (disk mounter applet, frequently used shortcuts, workspaces, show desktop, kill window, and trash icons, etc.) Notice how small the fonts (and how little real estate they waste). You can't notice the compact title bars, fonts, and window icons in this screen shot (since I redacted the rest of the desktop), but it's the same story there. Please help. I don't want to learn another distro, but Ubuntu gets less customizable with every "upgrade." Screenshot (not an inline image, since I don't have the reputation yet)... i.stack.imgur.com/puoUT.png

    Read the article

  • Wifi problems with Ubuntu 13.10

    - by Sparrowhawk4
    I should probably say straight off that I am brand new to Ubuntu. I installed 13.10 alongside Windows 7 a couple of days ago and I've managed to clear up all the little problems, apart from with the wifi. My internet is fine using an ethernet cable. I can connect to the wifi, and it tells me that the signal is good, but for the vast majority of the time I can't load anything, and system monitor tells me that I am sending and receiving nothing. The problem is somewhere in Ubuntu. It works fine on Windows 7, my Android phone and all of my flatmates laptops. I know I'm not the only one with this problem, but the fixes I've seen either don't work or I don't understand them enough to carry them out. Help? EDIT: from lspci command as requested 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller (rev 10) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

    Read the article

  • Arch Linux drops me on my school network.

    - by Kravlin
    I'm running a Lenovo X61 which i carry around my college for getting on the internet at various points in the day. The network has always been finicky but recently it's gotten worse. I'll connect using iwconfig, get an ip from dhcpcd and log in using vpnc to their system. Sometimes I'll stay connected for hours but most of the time within 30 seconds my network traffic will drop to zero and i'll be unable to do anything. My computer still belives it's connected, however to try again i need to put my wireless interface down, put it back up and try again. It's gotten so bad that i've got a window on my computer pinging yahoo or google constantly in order to know if i'm still able to get online. I know other people who have used Arch Linux that don't have the same problems as well as people who use Ubuntu who haven't had any problems either. It seems like my computer is a special case. Does anyone have any suggestions on how to fix it? dmesg doesn't show anything out of the ordinary going on and i don't know where else to look for errors or other things to try.

    Read the article

  • remote telnet and email

    - by Mustafa Ismail Mustafa
    This issue has been occupying my work for the last few days and I will be understating when I say its driven me up the blasted walls. Essentially, I can ping and tracert the domain jnrcs.org and the subdomains mail.jnrcs.org and mail.jordanredcrescent.org. All three mentioned point to ip address 212.38.147.97. About 4 days ago, when we registered the domain "jnrcs.org" suddenly all external connection to the mail server from outside was lost. Not just mail, but other http based port-forwarded or natted services (such as camera surveillance and pbx services). I tried good old telnet (I'm a linux user) and I get the following output: telnet> o mail.jnrcs.org 25 Trying 212.38.147.97... telnet: Unable to connect to remote host: No route to host telnet> Tracert gives me: traceroute to mail.jnrcs.org (212.38.147.97), 30 hops max, 60 byte packets 1 192.168.1.2 (192.168.1.2) 0.869 ms 0.944 ms * 2 * * * 3 * * * 4 * * * 5 * * * 6 * 212.38.128.118 (212.38.128.118) 33.875 ms 39.187 ms 7 * * * 8 * * * 9 * * * 10 * * * 11 * * 212.38.147.97 (212.38.147.97) 67.621 ms I am stumped. Other friends from all around the world can telnet no problem. What could have possibly happened to make telnet/smtp/pop/imap/http access stop? Please bear in mind I'm primarily a developer but I [am under the delusion] that I can carry my weight in IT administration :) TIA

    Read the article

  • Using dropbox / symbolic link combo successfully

    - by wim
    In the past I have kept some files on dropbox by copying them into my ~/Dropbox folder on Ubuntu. I don't want to move the original files into Dropbox synch folder or muck around with my directory structure. Then I have found I was using dropbox more and more, and wasting a lot of space this way by duplication of data. I use a small SSD locally for OS, any other data is kept on mounted shares from my NAS. I found I could successfully get files up to the cloud by using symbolic links like: ln -s /some/mounted/share/dir ~/Dropbox/dir And dropbox would carry on and sync those files remotely whilst only using up the space of the symbolic link locally. This worked well for me for a few weeks, until I turned on my laptop one day and saw '421 files have been removed from your dropbox' notification. They were still there in the original mounted share, but the symbolic links I'd made were completely gone for some reason. What did I do wrong? It is possible the share could have become unmounted, but I didn't expect this would cause all my files to be deleted from the cloud could it? How can I 'share' files on my dropbox in this way without the danger of the originals being modified from remotely?

    Read the article

  • NTBackup Error: C: is not a valid drive

    - by Chris
    I'm trying to use NtBackup to back up the C: Drive on a Microsoft Windows Small Business Server 2003 machine and get the following error in the log file: Backup Status Operation: Backup Active backup destination: 4mm DDS Media name: "Media created 04/02/2011 at 21:56" Error: The device reported an error on a request to read data from media. Error reported: Invalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. Error: C: is not a valid drive, or you do not have access. The operation did not successfully complete. I'm using a brand new SATA Quantum Dat-72 drive with a brand new tape (tried a couple of tapes). I carry out the following: Open NTBackup Select Backup Tab Tick the box next to C: Ensure Destination is 4mm DDS Media is set to New Press Start Backup Choose Replace the data on the media and press Start Backup NTBackup tries to mount the media Error Message shows: The device reported an error on a request to read data from media. Error reported: INvalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. On checking the log I find the following: Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8018 Date: 04/02/2011 Time: 22:02:02 User: N/A Computer: SERVER Description: Begin Operation For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. and then; Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8019 Date: 04/02/2011 Time: 22:02:59 User: N/A Computer: SERVER Description: End Operation: The operation was successfully completed. Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Read the article

  • Password Manager that allows syncing accross platforms

    - by lexu
    I use OS X, Linux, Solaris and windows for work and from home. There are good tools that allow me to manage the many logins/passwords required platform independently. But mostly they expect me to carry a thumb-drive around or require direct access to a central location (a sky drive in the cloud). The thumb-drive is too easily lost (= synchronized backup needed), the central location not always reachable/ mountable. Besides company policy rightly prevents this often. Is there a tool that allows me to add passwords locally and then syncs it's DB with the "mother-ship" later. Or is there another approach that you use, that solves my problem? EDIT My question is more about "synchronize" than cross platform. I've evaluated (=read feature list) some good cross platform tools, but need one that does the synchronizing for me. By synchronize I mean "merge two versions" not "replace (hopefully) old file with new." I'm not sure I'm always disciplined/awake enough to prevent data loss. UPDATE Lifehacker just posted that AgileSolutions now have a beta version of 1Password for Windows.

    Read the article

  • What speed are Wi-Fi management and control frames sent at?

    - by Bryce Thomas
    There are a bunch of different 802.11 Wi-Fi standards, e.g. 802.11a, 802.11b, 802.11g, 802.11n etc. that all support different speeds. Wi-Fi frames are generally categorised as one of the following: Data frames - carry the actual application data Control frames - coordinate when its safe to send/reduce collisions Management frames - handle connection discovery/setup/tear down (e.g. AP discovery, association, disassociation) My question is about whether all these frames, and specifically management frames, are transmitted at the fastest supported speed available, or whether certain classes of frames are transmitted at some lowest common denominator speed. I have noticed that when I put an 802.11b/g only device into monitor mode and capture traffic over the air, I still see management frames (e.g. association/disassociation) being transmitted between my phone and AP which are both 802.11n, even though 802.11n has a higher transfer rate. So I am imagining one of two possibilities: My 802.11n phone/AP had to negotiate a slower speed for some reason and that's why I can see their frames on my 802.11b/g monitoring device. Management frames (and perhaps control frames also?) are sent at a lower speed, and it's only data frames that are transmitted faster with newer 802.11 standards. The reason I would like to know which one of these two possibilities (or perhaps a third possibility) is the case is that I want to capture management frames, and need to know whether using an 802.11b/g card is going to lead to me missing some frames sent at higher speeds than the monitoring card can observe. If management frames are indeed sent at a slower rate, then it's all good. If I just happen to be seeing the management frames because my phone/AP have negotiated a slower rate though, then I need to reconsider what card I use for packet capture.

    Read the article

  • Is there a way to tag MP3 the way you can do with Photos in Live Photo Gallery or Picazza?

    - by bangoker
    I really do love the way you can tag pictures in Windows Live Photo Gallery. I find it incredibly useful to be able to tag the same picture with the tag "Cancun" and have it been automatically included when I look for the tag "Beach", "Trips" and "Fun Pic", since its a child tag of the former and also has a tag for the later. I also like that I can look for rating in the pics. On the other side, tagging MP3 has always been a pain in the ass, because I just find it to hard to classify music! Is it pop? techno? techno-pop? rock? indie-rock? indie-post-classic-pop-techno? I hate how ID3 just have one tag for genre, so I've tried tricks like putting all the genres I think it fits into, and then having lists in Winamp (which I dont use anymore) that filter out words in the ID3 tags (ie, Tag: Genre, Contains: Rock = rock list). But then, what about moods? I want to be able to tag my songs in genres and in moods, you know, happy, concentrate/work, party, romantic (wink wink), etc. Is there any way to do this, preferably in a way in which tags could carry on to other music players? Thanks

    Read the article

  • Custom MS-DOS / FreeDOS

    - by user1801387
    Goal : Build a custom DOS to boot into. To automate tasks like formating a drive, or doing recovery. I've been using Grub4DOS to boot into these images. So far I've looking into taking a windows repair disk ISO and extracting. I can't seem to find the autoexec.bat in the disk. I really don't know where to look for the startup configuration file to change or how to add an autoexec.bat. I've tried MS-DOS 6.22. But it lacks the diskpart tool I require. I've tried extracting the images and adding it. Then I got a boot failed. I assume that after i added it. All the files when to lower case names and I assume that the OS is case sensitive. Then I've looking into using FreeDOS. But I don't know how it works at all. Partially because I can't seem to grasp the help/wiki's information. I looked into getting a bearbones release with just the kernel and I think it's the config.sys file. But I don't have any idea on how the packaging system works to incorporate diskpart into it. So really I'm in general looking for a small bootable DOS to where I can incorporate diskpart and setup an autoexec.bat for the actual function to carry out and to boot into. Thanks :) This is just for personal use also.

    Read the article

  • NTBackup Error: C: is not a valid drive

    - by Chris
    I'm trying to use NtBackup to back up the C: Drive on a Microsoft Windows Small Business Server 2003 machine and get the following error in the log file: Backup Status Operation: Backup Active backup destination: 4mm DDS Media name: "Media created 04/02/2011 at 21:56" Error: The device reported an error on a request to read data from media. Error reported: Invalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. Error: C: is not a valid drive, or you do not have access. The operation did not successfully complete. I'm using a brand new SATA Quantum Dat-72 drive with a brand new tape (tried a couple of tapes). I carry out the following: Open NTBackup Select Backup Tab Tick the box next to C: Ensure Destination is 4mm DDS Media is set to New Press Start Backup Choose Replace the data on the media and press Start Backup NTBackup tries to mount the media Error Message shows: The device reported an error on a request to read data from media. Error reported: INvalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. On checking the log I find the following: Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8018 Date: 04/02/2011 Time: 22:02:02 User: N/A Computer: SERVER Description: Begin Operation For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. and then; Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8019 Date: 04/02/2011 Time: 22:02:59 User: N/A Computer: SERVER Description: End Operation: The operation was successfully completed. Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Read the article

  • windows xp blue screen dumping physical memory

    - by dotnet-practitioner
    I get following blue screen after running my laptop for an hour... A problem has been detected and windows has been shut down to prevent damange to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as cashing or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and the select safe mode. Technical Information: * STOP 0x0000008E (0xc0000005, 0x805B03F5, 0xF703DC7C, 0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact you system administrator or technical support group for further assistance. so.... if this is a faulty memory.... from where I could buy RAM for following laptop.... TOSHIBA SATELLITE A45-S250 My local Frys store does not carry memory for this laptop.

    Read the article

  • Active FTP client blocked on Windows XP

    - by Ian Hannah
    Summary We have a FTP server (running in active mode). We have an FTP client which is connecting to the server, carrying out a task and then closing the connection. The FTP Client can perform this operation on multiple threads. Problem We have a situation where customers are experiencing occasional failures to carry out operations on a FTP connection. The actual connection has been made to the server but when the server attempts to return data on the data port if fails. Observations We have a simple test FTP client which is running two separate threads. Each thread is performing a recursive listing of files from a root directory. With the firewall running on the client machine the hang happens within a few minutes. If the firewall is turned off on the client machine, the test application seems to run correctly. This does point to a potential firewall issue. However, with the firewall on we can list files on our company FTP server without any issues. If the simple test FTP client runs a single thread then we do not experience any problems whether or not the firewall is turned on. We have another simple test FTP client which was running 4 threads (with each opening a new FTP connection, doing a directory listing and closing the FTP connection as fast as possible) overnight with the firewall turned off. With the firewall turned on it fails in a short space of time. The confusing thing is that if the test FTP client and the FTP server are run on the same machine the failure occurs even though the firewall is turned off. This means that the problem may not be firewall related. Any help with what this could be would be much appreciated. Thanks Ian

    Read the article

  • Assistance on setup to Connect an offsite server to the LAN via RRAS VPN - Server 2008 R2

    - by Paul D'Ambra
    I have an office LAN protected using a Zyxel Zywall USG 300. I've set up an L2TP/ipsec VPN on that which accepts connections using a shared secret and I've tested this from multiple clients. I have a server offsite and want to set up RRAS to use a persistent connection to the VPN so that it can carry out network jobs even with no one logged in (I'm using it for Micorosft DPM secondary backup). If I create a vpn as if I were setting up a users laptop it can dial in no problem but if I set up a demand dial interface in RRAS it errors. I enable RRAS ticking only demand dial interface (branch office routing) Select network interfaces, right click and choose new demand dial interface Name the VPN ToCompany Select connect using VPN And then L2TP as the vpn type enter the IP address (double-checked for typos!) select Route IP packets on this interface specify static route to remote network as 10.0.0.0/24 with metric of 1 add dial out credentials (again double checked for typos and confirmed with other vpn connections click finish now I right-click on the new interface and choose properties and then the security tab I change Data encryption to optional select only PAP for Authentication (both as per manufacturer of Zywall) click advanced settings against type of vpn and set shared secret then I select the new interface, right-click and choose connect this dials and then errors with either 720 or 811 as the error codes. However, if I create a VPN by going to Network & Sharing center and setting up as if I was creating a VPN from my laptop to the office (say) it dials successfully so I know the VPN settings are correct and the machine can connect to the VPN. Suggests very strongly the problem is how I'm setting up RRAS. Can anyone help?

    Read the article

  • Are there any custom keyboard available for laptops

    - by Ahe
    My work laptop is a HP elitebook 8560w which I mainly use for programming. Usually I have a external keyboard but recently I have been working out of office and therefore have been using the laptops own keyboard. One thing has really started to bug me. The keyboard layout of this 15.6" laptop contains numpad but the arrow keys are really bad (too small). Also when programming, I really miss a standard inverted T-arrow keys and the home/end/PgUp/PgDn buttons. Then it occurred to me; I would rather give up a numpad than a standard arrow keys. (The keyboard real estate in 15.6" laptop would allow this, and I really have to agree with Jeff Atwood here http://www.codinghorror.com/blog/2009/02/have-keyboard-will-program.html) Which brings me to my question. Do any laptop manufacturers make custom keyboards for their laptops or is there some third party manufacturer who could supply these kind of special keyboards? Quick googling on this doesn't give any meaningful results. Looks like that I have to carry an external keyboard with me if someone here can't give any pointers.

    Read the article

  • What precautions should I take once defective RAM has been replaced?

    - by DustByte
    I recently discovered that my RAM is faulty (MemTest86+). I am waiting for new RAM to be sent to me.  It was through sheer luck that I discovered something was wrong. I was copying a large amount of big files and decided to verify the copies by their checksums. I discovered strange discrepancies, and noticed that checksum computation for the same file was not consistent. Now, this is the only problem I have encountered; no BSOD, no crashes, no errors. In a sense this makes me more worried than if I would have had massive crashes. I have no idea for how long the RAM has been faulty, and I have no idea if corrupt bits have been saved into files on my hard drives. I do know the RAM was fine two months ago (tested it back then). I am a user of Adobe's Lightroom and I am worried that photos or the catalog itself could carry corrupt data. Question: what should I do once new healthy RAM has been installed? Reinstall Windows (I'm using Windows 7, 64 bit)? Is there a risk that I will be presented with nasty surprises in the future if I don't? What about personal files? I have backups of some of the files but for newer files I'm not sure I can even trust the backups. It's going to take me many hard hours to manually replace files with older versions, or compare checksums.

    Read the article

  • Arch Linux drops me on my school network

    - by Kravlin
    I'm running a Lenovo X61 which i carry around my college for getting on the internet at various points in the day. The network has always been finicky but recently it's gotten worse. I'll connect using iwconfig, get an ip from dhcpcd and log in using vpnc to their system. Sometimes I'll stay connected for hours but most of the time within 30 seconds my network traffic will drop to zero and i'll be unable to do anything. My computer still belives it's connected, however to try again i need to put my wireless interface down, put it back up and try again. It's gotten so bad that i've got a window on my computer pinging yahoo or google constantly in order to know if i'm still able to get online. I know other people who have used Arch Linux that don't have the same problems as well as people who use Ubuntu who haven't had any problems either. It seems like my computer is a special case. Does anyone have any suggestions on how to fix it? dmesg doesn't show anything out of the ordinary going on and i don't know where else to look for errors or other things to try. Edit: this doesn't happen on my home network. It's a problem that only happens at school.

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >