Search Results

Search found 6373 results on 255 pages for 'dvd ram'.

Page 17/255 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

• ASUS Q500A will not boot from live DVD

  - by Sly

  I just purchased a new PC yesterday, an ASUS Q500A. I downloaded Ubuntu 12.10, burned it to a DVD, and tried to install it. As expected, I came to a screen that asked if I wanted to try, install, OEM install, or check the disc. After going to try, the DVD spins up as if it's about to boot the system and then immediately spins down again to leave a black screen. I've tried several boot options: noacpi nolacpi acpi=off Removing quiet splash -- nolacpi results in the DVD drive not spinning up at all. The rest have no effect. Some stats about the system: Intel i5-3210M processor Intel Integrated Graphics 4000 Any tips on other things to try?

  Read the article

• Why does my DVD drive spin up every minute or so, spin down, and repeat (new Dell Studio 15 with Win

  - by cybergibbons

  We have just got a new Dell Studio 15 laptop running Windows 7 home premium with slot load DVD drive. If there is a DVD drive in the drive, every minute or so, the drive will spin up, make a couple of noises like it is reading something and then spin down. I think this is ruining battery life. There is no software running that is obviously accessing the drive. Any ideas to what it could be? Are there any tools I could use to try and identify the problem? Thanks.

  Read the article

• Create netbook recovery image without DVD burner (virtual burner?)

  - by Dan

  I have a new Acer Aspire One which is asking to create a recovery DVD. It doesn't have a built in burner, and I don't have a USB burner. However I do have a large USB hard drive. Is there some way to get the recovery software to "burn" an image file instead of a real DVD? I know you can download a Linux recovery image, but the netbook comes with XP. I plan to install Linux on it but I'd like an XP recovery image just in case.

  Read the article

• DVD playback with Windows Media Player 11 works fine, but when copied to HDD and then played back, t

  - by stakx

  I have several DVDs with short documentaries on it. Since the notebook I'm using (a Dell Latitude E6400) has only one DVD drive, and I might play back those short movies very often, I thought of copying them to the HDD and playing them back from there. However, I've run into a problem, namely stuttering audio. Problem description: When I play back these movies directly from DVD (with Windows Media Player 11 under Windows Vista), everything works fine. Smooth video, no significant audio problems (only the occasional click). But as soon as I copy any of these DVDs to the HDD and try to play them back from there (e.g. using the wmpdvd://drive/title/chapter?contentdir=path protocol, I get stuttering audio — audio playback sounds like a machine gun for a third of a second or so, approx. every 8 seconds. I have tried converting the VOB files from the DVD to another format (ie. ripping), but that resulted in a noticeable downgrade of picture quality. Therefore I thought it best to keep the files in their original format, if possible. Still, I suspect that the stuttering audio is due to some (de-)muxing problem, and that changing the file format might help. (After all, video playback is fine; therefore I don't think that the hardware is too slow for playback.) Only thing is, I don't know how to convert the VOB files to another Windows Media Player-compatible format without quality loss. I hope someone can help me, or give me further pointers on things I could try out to get HDD playback to work without the problem described. Some things I've tried so far, without any success: VOB2MPG, in order to convert the .vob file to a .mpg file. But that changes only the A/V container, not the content. No re-encoding takes place at all. Re-encoding with MPlayer/MEncoder. Lots of quality loss there, and I frankly haven't got the time to test all possible settings combinations available. Disabling all plug-ins, equalizers, etc. in Windows Media Player. Disabling all hardware acceleration on the audio playback device. Further info on the VOB files I'm trying to playback: The video format is MPEG ES, PAL 720x576 pixels @ 24/25 frames per second. The sound stream is uncompressed PCM, 16-bit stereo @ 48kHz. (Might it help if I somehow re-encoded the sound stream at a lower resolution, or as an MP3? If so, how would I do this without changing the video stream?) P.S.: I am limited to using Windows Media Player (11). (I previously tried MPlayer btw., but the video playback quality was surprisingly bad.)

  Read the article

• What is the best way to clean your dvd-burner?

  - by Nifle

  What is the best way to clean your dvd-burner?

  Read the article

• Windows 7 cannot burn a DVD-R at 4x or 8x? (it seems to have to use the MAX speed)

  - by Jian Lin

  Windows 7 is great to have the ability to burn an .iso into a DVD-R, but it seems like there is no way to change the speed to 8x or 4x? (so it may go "max", which is 16x) because some of my DVD drives cannot read data all the time if the disc was burned at 16x, that's why usually i limit it to 8x. also, some articles say that disc burned at 4x can last a longer time, so i am tempted to burn something at 4x sometimes. any method or hack that can make it happen?

  Read the article

• How can you rip a DVD using VLC media player on Mac OSX?

  - by gwc

  I want to be able to rip DVD's on my Mac using VLC media player.

  Read the article

• decrypting a dvd and testing that it is decrypted and playing it locally with its menu?

  - by barlop

  I have a DVD , it may be decrypted. How do I get it to hard drive decrypt it and see if it is decrypted? I have got it to hard drive... I can get VOB files to play(does that mean it is not encrypted?) but I can't get it to play with the menu. I can get the DVD itself to play with a menu. I'd like to get the local copy to. Also, I can play the first VOB file in VLC and MPC but not in mplayer. But that's a secondary thing. I will use whatever player you suggest. I have tried VLC, and mplayer, and media player classic.

  Read the article

• Linux : How to convert media files to DVD format and burn?

  - by James.Elsey

  I have a load of media files on my PC, mostly AVI/MKV and some mpegs. On windows, I would use ConvertXToDVD to convert these to DVD format, and to burn to disc. That application also lets you save a bit of space on the DVD to put the original file in its AVI format on as well. How can I do this on linux? What are the alternatives to this Windows application? I could try to run ConvertXtoDVD under wine but I would prefer to find a native linux solution Thanks in advance!

  Read the article

• Convert an entire DVD (with chapter menus) to Flash?

  - by Nick

  I was recently asked to put a DVD onto a website - I ripped the chapters individually as MP4 files and created a nicely formatted playlist which lets you select the chapter you'd like, but apparently it's a really big requirement that the original DVD menus are preserved too. Agh. I have no experience with using Flash or ActionScript whatsoever, and do not even have the software, so I was wondering if there is any software out there that could do this? I'm not too worried by cost as it'll presumably be cheaper than buying a copy of Flash anyway.

  Read the article

• Where is my ram?

  - by gsedej

  I have 2GB installed on my machine running Ubuntu 12.04. After some time of use, I see much of my RAM used. The RAM does not free enough even though I closed all my programs. I included 2 screenshots. First is "Gnome system monitor" (all process) and second is "htop" (with sudo), both sorted by memory usage. From both you see, that it's not possible that all running apps takes together 1GB of memory. First 7 biggest programs sum 250, but others are much smaller (all can't sum even 100MB). The cache is 300MB (yellow ||| on htop) and is not included in 1GB used. Also 260MB is already on swap. (which actually makes 1,3GB of used memory) If i start Firefox (or Chrome) with many tabs, it has only 1GB available and not potentially 1,5 GB (assume 0,5GB is for system). When I need more ram, swapping happens. So where is my ram? Which program is using it? How can i free it, to be available for e.g. Firefox? Gnome system monitor htop

  Read the article

• Ubuntu 64-bit 12.04 installation dvd boot problem blank screen

  - by user877329

  I get blank screen when trying to install UbuntuStudio 64-bit DVD (i tried to install from DVD not USB stick). When using nosplash and no quiet i see that it hangs when it tries to load the nouveau driver for my GeForce GT 630 so it looks like there is a problem with support for my graphics card. After installation, I tried to install the binary nvidia current driver from package manager, but then, i just get a text terminal after rebooting. Any solution?

  Read the article

• Motherboard booting without RAM in Dimm1

  - by Jesus Ramos

  Is it possible to have a motherboard boot without placing RAM in the DIMM1 slot? Our new cooling solutions for motherboards are causing us issues where some boards that have RAM with raised heatsinks will not actually fit because the DIMM1 slot is partially blocked. Currently we mount the RAM in DIMM1 and DIMM3 because it's dual channel, are there any settings that can be changed on the BIOS to allow motherboard to boot without RAM in DIMM1 such as placing the RAM in DIMM2 and DIMM4?

  Read the article

• Automatically kill a process if it exceeds a given amount of RAM

  - by chrisamiller

  I work on large-scale datasets. When testing new software, a script will sometimes sneak up on me, quickly grab all available RAM, and render my desktop unusable. I'd like a way to set a RAM limit for a process so that if it exceeds that amount, it will be killed automatically. A language-specific solution probably won't work, as I use all sorts of different tools (R, Perl, Python, Bash, etc). So is there some sort of process-monitor that will let me set a threshold amount of RAM and automatically kill a process if it uses more?

  Read the article

• How to fully use the 4G in my Laptop under Ubuntu 9.10 - 32-bit

  - by jfmessier

  I have a Toshiba A100, which I upgraded to 4G of RAM. The hardware startup indeed shows 4G of RAM, and I recently installed Windows 7, just to see how it behaves on it. So far so good, it displays 4G of RAM. Not that I tried to use it all, but it displays it. Previously under XP, I also would see 4G of RAM. But under Ubuntu 9.10 (32 or 64 bits), it only displays 2.9 G of RAM. And my kernel is the "pae" compiled one, which is supposed to do the trick to work around the 32-bit CPU limitation. How can I get Ubuntu to fully use my 4G of RAM ?

  Read the article

• Troubleshooting Mid 2007 iMac RAM upgrade

  - by MDT

  I am trying to install new RAM in my friends iMac, something I have done several times before. We unplugged the computer before performing the upgrade, used anti static wrist bands, and yes the memory is compatible and inserted correctly. The stock RAM was Hynix 1gb pc2-5300s-555-12 and the memory we are replacing it with is 2x2gb Centon CMP800SO2048.01. Now I know this model number suggests that the ram is 800MHz and the iMac is only 667MHz but it clearly states on the box that this RAM is PC2-5300 667MHz compatible. The problem is, that when I install the new RAM I get little response from the computer. I hear the hard drive and disk drive start to initialize, but then they just stop and the screen remains black. I have tried every variation of the new RAM and the old RAM in both slots and even tried the same RAM from my old iMac and I just can't get it to boot. Has anyone ever had a problem like this? Thank you in advance for any and all input on thus issue!

  Read the article

• Computer does not boot after ram upgrade

  - by Calmarius

  I have a Dell Optiplex GX520 desktop (it's abount 5 yr old) PC with 512 MB DDR2 RAM. Since my computer always swapping I thought I should upgrade my RAM. I bought a Kingmax 2GB DDR2 RAM. But my system does not boot. The status leds are on 2 and 4. The user manual says 'video card failure' wtf? I put back the original module and everything works. I tried many combinations. When I leave the old 512 RAM in and put the 2GB next to it to the other socket my system completes the POST and I'm able to enter the BIOS menu. It says my system has 2.5 GB installed, one 0.5GB and one 2GB in dual asymmetric channel mode. It's seemingly right. Exiting the BIOS setup GRUB loads successfully, but when I try to boot Ubuntu it crashes with kernel panic immediately. Trying to load Windows XP does not get past the loading screen, it crashes with 0x8E stop error. Does this mean the ram I bought is faulty? Or is it just mean that the memory module I bought is too new to be handled my computer? I this case I may exchange the RAM with my friends. No other computer is in my house (my very old box has DDR1 ram, my systers new box has DDR3 ones. I can't plug my memory in neither one.) I'm going to return the RAM to store to replace it with a better one tomorrow. Is there any hope to get this new module work?

  Read the article

• DVD Share on Vista Home Premium Failing

  - by hpunyon

  UPDATE: - I can't find any Local Policy Editor for Vista Home Premium, as suggested. - I did learn about registry keys: allocatecdroms, allocatefloppies, allocatedasd and tried adding these keys (individually and collectively) and setting them to both 0 or 1. There was no positive affect on read access to the DVD root folder - always Access Denied. ORIGINAL POST: Failing read access to the root folder of a DVD drive in Vista Home Premium laptop using the Guest account - Access Denied. The client is an XP Home PC that can see, but not access, the data in the share. I'm only trying to read the data DVD - not trying to write/burn anything. On the Vista laptop, I have: All Firewalls and Antivirus disabled.UAC disabled. Password checking disabled. "Advanced Shared" the DVD drive, with "Everyone" having full-access permissions to the share. Tried adding Guest and Anonymous users having full-access permissions to the share. RestrictAnonymous=0 set in the registry. Both PC's are in the same workgroup (MSHOME) The XP Home client sees the shared DVD in \Vista_Hostname\ but when I double click the drive icon on the client, I get a popup that access is denied, check with the administrator, etc. I can share other folders on the Vista PC and see and READ these from the XP Home client. If I enable password checking on the Vista side, I get a user/password popup, and I can authenticate (using my known Vista account, that happens to have Admin rights) and then I can get to see and read the DVD data. I need to open this up so that the (default) Guest user can see and access the DVD data files.

  Read the article

• Caching/preloading files on Linux into RAM

  - by Andrioid

  I have a rather old server that has 4GB of RAM and it is pretty much serving the same files all day, but it is doing so from the hard drive while 3GBs of RAM are "free". Anyone who has ever tried running a ram-drive can witness that It's awesome in terms of speed. The memory usage of this system is usually never higher than 1GB/4GB so I want to know if there is a way to use that extra memory for something good. Is it possible to tell the filesystem to always serve certain files out of RAM? Are there any other methods I can use to improve file reading capabilities by use of RAM? More specifically, I am not looking for a 'hack' here. I want file system calls to serve the files from RAM without needing to create a ram-drive and copy the files there manually. Or at least a script that does this for me. Possible applications here are: Web servers with static files that get read alot Application servers with large libraries Desktop computers with too much RAM Any ideas? Edit: Found this very informative: The Linux Page Cache and pdflush As Zan pointed out, the memory isn't actually free. What I mean is that it's not being used by applications and I want to control what should be cached in memory.

  Read the article

• DVD/CD burning .zip: is it more reliable, faster, longer lasting to burn a zip of files rather than the files as a folder?

  - by Rob

  Is it more reliable, faster, longer lasting to burn to CD/DVD a zip (or a few large zips) of files rather than the files as a folder? Just thinking if 1000s of small files would not be as efficiently recorded compared with one or a few large zips. Also, even after the burning program verifies the disc, I also use Beyond Compare to compare the files with those on the disc. Always binary compares as identical but I hear the drive stuttering presumably as the head is being shifted only slightly each time to seek the next file, which leads me to think that its best to make one or more zips and copy those locally to compare. Or is it that burning invidual files to the disc is not as readable which causes the head to stutter. There aren't any problems, my disc burns are reliable, just thinking more of efficiency and longevity, the discs burn and verify fast enough on my 18x DVD burner. I'm using ImgBurn mostly. Also used Nero in the past. I burn whole discs closed, finalised. Not sure which write mode but would think Disc At Once from a temporary cached image made by the burning program would be the most reliable.

  Read the article

• Is this DVD drive broken? Brand new, i need help convincing

  - by acidzombie24

  I am asking bc i know dell is going to give me a problem. How do i know if my DVD is broken on my laptop? i burnt 4 DL disc and they ALL failed, i called and dell suggested roxio. I used it and burnt 1 disc without error and the 2nd disc with an error. With both apps there were no 'problems' during the burning process only failed on the verification process. Some of these bad disc dont work on other PCs and one locks up windows when i click a specific file. Does that sound like a broken burner to you guys? when i called dell they told me since it can read disc properly 100% of the time and software doesnt fail in the burning process its not a broken drive _. They forward me to software support who demand a fee (i think $100) to help me fix my software. I am annoyed bc i dont want to be on the phone for them to watch me burn a dvd and since i burned it once correctly i dont want to happen to burn correctly again to have them say they solved my problem (doing nothing) and charge me refusing to refund. -edit- The errors i got were 1) the request could not be performed because of an I/O device error 2) Windows locking up when opening 1 specific file 3) Cannot copy : Data error (crc) NOTE: the file that causes the problems are random every disc

  Read the article

• Windows 7 x64: 3900mb of 4gb RAM usage, even when (almost) nothing running.

  - by user34630

  As the title suggests, I am having a problem with memory usage. I have had my computer (Vaio AW11Z/B laptop) for over a year now, and it was running perfectly until I guess a day or two ago. Now programs randomly crash, the mouse lags around the screen and the memory usage is going through the roof for no apparent reason. I am having exactly the same problem as this guy: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/1f716693-0a46-473e-9dc0-8c2b1a058443/. I think he explains it better. Anyone had a similar issue? What's going on? I don't think it's a virus/adware thing. Thanks very much for any help.

  Read the article

• What are the best possible ways to benchmark RAM (no-ECC) under linux / arm?

  - by moul

  I want to test integrity and global performances of no-ECC memory chips on a custom board Are there some tools that run under linux so I can monitor system and global temperature in the same time ? Are there some no-ECC specific tests to do in general ? EDIT 1: I already know how to monitor temperature (I use a special platform feature /sys/devices/platform/......../temp1_input). For now : wazoox : it works but I've to code my own tests Jason Huntley : ramspeed : does not work on arm stream benchmark : it works and is very fast, so I'll look if it's accurate and complete memtest : I'll try later, since it does not run directly from linux stress for fedora : I'll try later too, it's too problematic for me to install fedora now I found this distribution : http://www.stresslinux.org/sl/ I'll continue to check tools that run directly under linux without too big dependencies, after I'll maybe give a try to solutions like stresslinux, memtest, stress for fedora. Thanks for you answers, I'll continue to investigate

  Read the article

• What roles are more RAM hungry in Windows 2008 R2 Server?

  - by Lars

  I am testing several servers in lab environment and I am wondering what is more memory hungry. a DC01 with AD on or a MEM01 with several roles installed such as DHCP, VPN, deployment etc Is Active directory more demanding then the others you think?

  Read the article

• file error /boot/grub/i386-pc/normal.mod trying to repair boot, live dvd install probleml

  - by user179295

  I have seen that there are a lot of threads about this problem. I had Windows 8 installed on my series 3 samsung i5 computer and I tried to install ubuntu 13.04. This is what I did: Because of the secure boot I can't install ubuntu from the dvd. So I went in the bios and disabled secure boot and enabled ''CSM''. I went out of the bios and windows 8 couldn't boot more. So I follow a guide on this thread ( Installing on a Pre-Installed Windows 8 System (UEFI Supported) ) and on ubuntu I tried to repair the boot by inserting this code in the terminal: sudo add-apt-repository ppa:yannubuntu/boot-repair sudo apt-get update sudo apt-get install boot-repair Then I ran boot-repair and I follow all the steps. Then I reboot the sistem and saw the black screen that says: error: file '/boot/grub/i386-pc/normal mod' not found grub rescure> Now I saw a lot of guides about this problem but I can't understand how to reistall ubuntu trough the live dvd that I used to install it the first time... I put it in the computer but nothing appears.. so what should I do now? I'm a noob on ubuntu and I have read all the things about this grub 2 install and know where the problem comes from but how to start the dvd??

  Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >