Search Results

Search found 16386 results on 656 pages for 'flash drive'.

Page 17/656 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

• Sprites are sometimes blurry in Flash

  - by Tim Cooper

  I am playing around with drawing an SVG sprite (imported in through [Embed]). Depending on the coordinates of the image, sometimes it appears more crisp than others. The following image shows how at different locations is it rendered differently: (Image link - You may have to download and zoom in with an image editor to see it) You'll notice that the middle sprite is more blurry than the ones on the sides. Does anyone know why this is? Any help would be appreciated.

  Read the article

• Traffic estimation for a multiplayer flash game

  - by Steve Addington

  hey, i want to know if my rough traffic estimations are right, it would be for a pretty simple realtime flashgame in the style of haxball (but not as a soccer game) heres a video of it http://www.youtube.com/watch?v=z_xBdFg1RcI So here comes my estimation, i dont know if they are realistic! i hope someone can help me. consider the packet attached as a typical one sent every 200ms, its 148bytes + 64 bytes of header will make around a 200bytes packet. The server will receive 200bytes x 6 players x 5 times a sec=6000bytes/s=5.85Kbytes/s=46.9kbit/s plus he has to send all back to the players, so at this point are 94Kbit/s.The server received all the information, perform the definitive calculation and send the new position to all players, in a bigger packet of around 900bytes that have to be delivered to the others 6, which makes 900bytes x 6 players x 5 times a sec=27000bytes/s=26Kbytes/s=210kbit/s. overall that would be 26kbyte per second. thats like 130mb traffic per hour for a 6player room. but somehow i think the numbers are too high? that would be really much traffic for such a simple game. did i calculate something wrong?

  Read the article

• Box2D Bicycle Wheels Motor Problem - Flash 2.1a

  - by Craig

  I have made a bicycle with Box2D using several polygons for the frame at different angles connected using weld joints, and I have revolute joints on the wheels with a motor. I have made some basic terrain (straight ground and a small ramp) and added keyboard input to control the bicycle with torque to balance it. All of this is done in with Box2D's Debug Draw. When the bicycle is on its back wheel but diagonally forward (kinda like this position - /) the motors just cause it go spinning backwards over when in reality it should either stay on its back wheel or go down onto both wheels. Here's my code the revolute joints: //Front Wheel Joint var frontWheelJointDef:b2RevoluteJointDef = new b2RevoluteJointDef(); frontWheelJointDef.Initialize(frontWheelBody, secondFrameBody, frontWheelBody.GetWorldCenter()); frontWheelJointDef.enableMotor=true; frontWheelJointDef.maxMotorTorque=10000; frontWheelJoint = _world.CreateJoint(frontWheelJointDef) as b2RevoluteJoint; //Rear Wheel Joint var rearWheelJointDef:b2RevoluteJointDef = new b2RevoluteJointDef(); rearWheelJointDef.Initialize(rearWheelBody, firstFrameBody, rearWheelBody.GetWorldCenter()); rearWheelJointDef.enableMotor=true; rearWheelJointDef.maxMotorTorque=10000; rearWheelJoint = _world.CreateJoint(rearWheelJointDef) as b2RevoluteJoint; And here's the relevant part of my update function: // up and down control wheels motor if (up) { motorSpeed-=0.5; } if (down) { motorSpeed += 0.5; } // left and right control cart torque if (left) { middleCentreFrameBody.ApplyTorque( -3); gearBody.ApplyTorque( -3); firstFrameBody.ApplyTorque( -3); secondFrameBody.ApplyTorque( -3); rearWheelToChainBody.ApplyTorque( -3); chainToFrontFrameBody.ApplyTorque( -3); topMiddleFrameBody.ApplyTorque( -3); } if (right) { middleCentreFrameBody.ApplyTorque( 3); gearBody.ApplyTorque( 3); firstFrameBody.ApplyTorque( 3); secondFrameBody.ApplyTorque( 3); rearWheelToChainBody.ApplyTorque( 3); chainToFrontFrameBody.ApplyTorque( 3); topMiddleFrameBody.ApplyTorque( 3); } // motor friction motorSpeed*=0.99; // motor max speed if (motorSpeed>100) { motorSpeed=100; } rearWheelJoint.SetMotorSpeed(motorSpeed); frontWheelJoint.SetMotorSpeed(motorSpeed); Any ideas what might be causing this? Thanks

  Read the article

• A certain flash application causes a system crash

  - by noobermin

  It's no surprise I guess. Go here to try it! http://www.belgeler.com/blg/2hni/griffiths-introduction-to-electrodynamics-3-ed-solutions-manual It's wonderful, after a few seconds, top shows that our good friend plugin-container takes 83% of the physical memory (8 GB) before everything freezes and the PC doesn't respond. I'm using Ubuntu 12.04 and I have an nvidia (GTS 250) card with the "post-release updates" version of the driver. OFFTOPIC: Yes, it's the solutions manual. I'm self-studying so I don't have a professor to check my work. Please don't judge me :)

  Read the article

• Flash Webcam non responsive Ubuntu 11.10

  - by powerbuoy

  I've got the same problem as this gentleman: https://answers.launchpad.net/ubuntu/+source/flashplugin-nonfree/+question/176541 Where the webcam settings / access does not work at all / is completely unresponsive in Ubuntu 11.10. I've tried webcam access in Facebook, Google+, my own code + a number of tutorials/demos and none work. What happens is the settings dialogue is completely unresponsive. Clicking tabs or buttons does nothing. In the question linked to a suggested answer is to run Unity 2D. Unfortunately this does not work for me (the exact same thing happens). I've also tried Gnome 3 which also does not work. Note that it is only the webcam settings that don't work. YouTube videos and annoying banners work just fine. Does anyone know of a workaround for this (except going back to 11.04) or if they've fixed this in 12.04? - also, are any of you experiencing the same thing?

  Read the article

• How can I get shockwave flash to work on Ubuntu 12.04

  - by John Hill

  I've tried most of the things suggested on this site and others so far. It's kind of frustrating because this is a home computer and I mainly use it for browsing the internet and watching YouTube videos. When I try to install something that might fix it, it just downloads a bunch of files and says to extract them or whatever. I'm not sure what to do with the files after I extract them. That's probably the main issue: I don't have a lot of experience working with computers at this level. I'm used to Windows, which seems to make most software installs idiot-proof. Any suggestions are appreciated!!

  Read the article

• Managing flash animations for a game

  - by LoveMeSomeCode

  Ok, I've been writing C# for a while, but I'm new to ActionScript, so this is a question about best practices. We're developing a simple match game, where the user selects tiles and tries to match various numbers - sort of like memory - and when the match is made we want a series of animations to take place, and when they're done, remove the tile and add a new one. So basically it's: User clicks the MC Animation 1 on the MC starts Animation 1 ends Remove the MC from the stage Add a new MC Start the animation on the new MC The problem I run into is that I don't want to make the same timeline motion tween on each and every tile, when the animation is all the same. It's just the picture in the tile that's different. The other method I've come up with is to just apply the tweens in code on the main stage. Then I attach an event handler for MOTION_FINISH, and in that handler I trigger the next animation and listen for that to finish etc. This works too, but not only do I have to do all the tweening in code, I have a seperate event handler for each stage of the animation. So is there a more structured way of chaining these animations together?

  Read the article

• Flash Webcam non responsive

  - by powerbuoy

  I've got the same problem as this gentleman: https://answers.launchpad.net/ubuntu/+source/flashplugin-nonfree/+question/176541 Where the webcam settings / access does not work at all / is completely unresponsive in Ubuntu 11.10. I've tried webcam access in Facebook, Google+, my own code + a number of tutorials/demos and none work. What happens is the settings dialogue is completely unresponsive. Clicking tabs or buttons does nothing. In the question linked to a suggested answer is to run Unity 2D. Unfortunately this does not work for me (the exact same thing happens). I've also tried Gnome 3 which also does not work. Note that it is only the webcam settings that don't work. YouTube videos and annoying banners work just fine. Does anyone know of a workaround for this (except going back to 11.04) or if they've fixed this in 12.04? - also, are any of you experiencing the same thing?

  Read the article

• Macbook 4,1 crashes when flash video (youtube) is played fullscreen (Ubuntu 12.04)

  - by Ydun

  I have searched for similar posts but those were mostly about erratic behaviour. My macbook shuts down instantly without warning when I play a youtube video fullscreen; sometimes after five minutes sometimes longer, never immediately. I can play the video normally for as long as I like, it does not crash, only when played fullscreen. I have tried Firefox and chromium, it crashes with both browsers. Anyone encountered the same thing or has a solution? thanks

  Read the article

• How to grub-install ignore specific drive/partition

  - by gsedej

  Is it possible to use grub-install or update-grub to just search on specific disk/partition? (or ignore specific)? I installed Ubuntu 12.04 on my hard drive, but i wished to do some testing on it without harming current installation, so I "rsynced" root partition (the only) to the USB partition (ext4). I did fix /etc/fstab on USB partition. The problem is that when I do grub-install /dev/sdb (usb) GRUB seems to confuse when UUIDs. Whatever I chose in GRUB it always boot from disk. In grub in edit mode I see that in two "UUID" lines are not the same. If I retype UUID from "first" to second "line" it boots from USB (as I wish). Is there any other way than fixing /boot/grub/grub.cfg each time? EDIT: the GRUB generated good when I booted from USB and grub-install from there, but question is still if it's possible ignore drives

  Read the article

• Hard Drive benchmark values show write very very slow

  - by John

  I recently started to have issues with my laptop being very slow. I ran a hard drive benchmarking tool (by ATTO) that showed that the write speed was very very slow on my boot drive. I ran the same benchmark on my usb drive and it was 650 times faster than my boot drive when it came to writing. Reading is very fast/normal on both. I swapped out an identical drive and ran the same benchmark. This time the drive showed proper write speed. Thinking that I had a hard drive going bad I cloned the old one onto the new one. I managed to clone the problem too. Anyone have any ideas on what in WinXP SP3 might be causing the write issues? I am on a corporate network and we have commercial anti-virus software installed. (AVG I think) I regularly run defraggler and have about 40 gig free on a 100 gig drive. The machine has 4 gigs of memory. Any ideas? TIA J

  Read the article

• Seagate 3TB ST3000DM001 hard drive not recognized by Linux, causes fdisk to hang

  - by MountainX

  I'm running Kubuntu 12.04. I have a brand new, never used Seagate 3TB ST3000DM001 hard drive. It's an internal drive. I installed it in a USB enclosure. When I connect it to my PC, nothing happens automatically. When I run sudo fdisk -l, fdisk hangs (without reporting this drive) until I disconnect this drive from the USB port. blkid won't report it either. I tried connecting it to both USB 2.0 and USB 3.0 ports on my PC. I got the same result either way. I tried two different USB enclosures with the same result. If I take the same drive, same enclosure and connect it to a Windows 7 laptop, it is recognized automatically as a USB mass storage device. I want to format the drive (probably ext4) and copy files to it. I have another drive, also in a USB enclosure, that is connected via USB 3.0 to this PC and it works fine. It's a 2.0 TB Samsung HDD. I plan to copy files from the 2TB to the 3TB drive, once I get this issue resolved. My motherboard is an Asus Asus P8B WS LGA1155/ Intel C206/ Quad CrossFireX/ SATA3&USB3.0/ A&2GbE/ ATX. What is the resolution?

  Read the article

• ownership of hard drive recoveery of files Windows 7

  - by Jeff

  Here is the issue. I have an old laptop that died that was running xp. I now have a win 7 laptop. I need to get the files off the old drive. Win 7 will not let me take ownership of the drive. I can runn the comand prompt in regular mode and do a dir on the drive that shows up as Q: drive in regular mode. I gives me the volume as c and the serial number. I can not take ownership in regular mode with the comand prompt or other means. Microsoft site says use safe mode with networking. So I go to safe mode the drive shows up as G: in safe mode. I use the comand prompt Takeown /f G: and get the device is not ready error. I am at a loss. All I want is to retrieve my files from this drive. Any ideas or sugestions. I don't see how you can dir and get some info in one mode and not acces it in another. I have to get ownership and permissions fixed to get in the drive to get my files. Thanks in advance. I might add that I am using a usb3.0 to ide/sata cable adapter. Software came with the device but I can't make heads or tails out of the manual to know if any of the software can help me. The soft ware is PCClone Ex lite, and Clone Drive Soft ware

  Read the article

• Moving an external hard drive while running

  - by user1108939

  I mean physically moving the drive around. I've never dealt with external hard drives before. Just plugged this wd mypassport to test the transfer rate. At one point I 'safely ejected' the drive. A minute later I decide to check the underside of the drive, not realizing the disk is still spinning. I lift the drive, rotating my writs about 70 degrees to the left... I hear a sequence of three high pitched sounds. I couldn't determine whether that was an indication beep by an internal security feature or the head scratching the plate (oh god...). Drive stops and usb power is disconnected. I reconnect it - it shows up fine - reads/writes. The drive was not reading/writing when i moved it. Did I damage my drive? Are these things that fragile? I thought them to be at least as durable as a standard 2.5" internal drive. Am I mistaken?

  Read the article

• 16GB Usb Flash Drive shows as 16MB and is unusable

  - by Karim

  i have a sandisk Cruzer 16GB usb flash drive but it started to show up as 16MB. and i cant use it , it tells me that i need to format the drive or "Please insert a disk into drive X" does anyone have any recommadation for any software so i can check the flash drive? Edit: i cant format it since the format fails and well the idea is that it shows as 16MB instead of 16GB

  Read the article

• How to convert flash drive to Windows installation CD

  - by Barry White

  Hello, I have an 8GB USB Flash Drive, and the .iso file for XP Home edition (along with a valid CD key). One of my computers doesn't have an optical drive. How do I put the .iso file on the flash drive, and reinstall Windows on the computer that doesn't have the optical drive? Thanks!

  Read the article

• Can't access external hard drives or thumb drives

  - by calden

  I am not a complete linux noob but I don't know a lot either and would greatly appreciate some help with this. I just installed Ubuntu 10.10 onto my laptop. Everything is working great however USB devices such as thumb drives and external hard drives wont show up. I have been looking around a bit and when I run sudo fdisk -l it displays this: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00065684 Device Boot Start End Blocks Id System /dev/sda1 * 1 29255 234983424 83 Linux /dev/sda2 29255 30402 9212929 5 Extended /dev/sda5 29255 30402 9212928 82 Linux swap / Solaris Disk /dev/sdb: 16.0 GB, 16026435072 bytes 64 heads, 32 sectors/track, 15283 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000df90d Device Boot Start End Blocks Id System /dev/sdb1 * 1 15283 15649776 7 HPFS/NTFS It does seem to display my 16 gig thumb drive but other then seeing it here I cant access it to read and write files to it. It does the same with my external hard drive. I know those devices work as I have tried them on my other computer and they are working fine. Also this is what is in fstab if this will help anybody help me: proc /proc proc nodev,noexec,nosuid 0 0 /dev/sdb1 / ext4 errors=remount-ro 0 1 /dev/sdb5 none swap sw 0 0 Thank you very much for the help everyone.

  Read the article

• Creating a bootable flash without overlayfs

  - by Septagram

  I want to create an USB stick to carry my Ubuntu everywhere around with me. It's not intended to spread Ubuntu by installing it everywhere, but rather for running my configured system on any computer I come across. So far, I went with installing Ubuntu with unetbootin, however, I have some issues with this. When installed with netbootin, the original disk image is kept intact on the flash drive, forever. Also, a file is created for persistent storage and during boot it is accessed together with the image by overlayfs. This, in my opinion, has the following problems: If system is updated regularly, then files from the image are overwritten in persistent storage, doubling their size and wasting precious space. Persistent storage has a fixed size that you have to define from the start, again, wasting precious space. I'm not 100% sure, but maybe using overlayfs makes disk access slower, and more so on the relatively slow devices. So I'd like to find another solution: either to get rid of the original image or to install Ubuntu "normally" on the separate ext2 partition, or maybe even install it in the main vfat partition on the USB stick. Suggestions?

  Read the article

• Disk Drive not working

  - by user287681

  The CD/DVD drive on my sisters' (I'm helping her shift from Win. XP (now officially deprecated by Microsoft) to Ubuntu) system. Now, it may end up being a failed attempt, all together (Almost the whole last year (when she's been on XP) the disk drive hasn't (not even powering on) been working.), I just want to make sure I've explored every remote possibility. Because I figure, "Huh, now that I've got Ubuntu running, instead of XP, that (just) might make a difference.". I have tried using the sudo lshw command in the terminal, to (seemingly) no avil, but, who knows, you might be able to make something out of it. Here's the output: kyra@kyra-Satellite-P105:~$ sudo lshw [sudo] password for kyra: kyra-satellite-p105 description: Notebook product: Satellite P105 () vendor: TOSHIBA version: PSPA0U-0TN01M serial: 96084354W width: 64 bits capabilities: smbios-2.4 dmi-2.4 vsyscall32 configuration: administrator_password=disabled boot=oem-specific chassis=notebook frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=00900559-F88E-D811-82E0-00163680E992 *-core description: Motherboard product: Satellite P105 vendor: TOSHIBA physical id: 0 version: Not Applicable serial: 1234567890 *-firmware description: BIOS vendor: TOSHIBA physical id: 0 version: V4.70 date: 01/19/20092 size: 92KiB capabilities: isa pci pcmcia pnp upgrade shadowing escd cdboot acpi usb biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM)2 CPU T5 slot: U2E1 size: 1667MHz capacity: 1667MHz width: 64 bits clock: 166MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1 Cache size: 16KiB capacity: 16KiB capabilities: asynchronous internal write-back *-cache:1 description: L2 cache physical id: 6 slot: L2 Cache size: 2MiB capabilities: burst external write-back *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB capacity: 3GiB *-bank:0 description: SODIMM DDR2 Synchronous physical id: 0 slot: M1 size: 1GiB width: 64 bits *-bank:1 description: SODIMM DDR2 Synchronous physical id: 1 slot: M2 size: 1GiB width: 64 bits *-pci description: Host bridge product: Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display:0 description: VGA compatible controller product: Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0200000-d027ffff ioport:1800(size=8) memory:c0000000-cfffffff memory:d0300000-d033ffff *-display:1 UNCLAIMED description: Display controller product: Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:d0280000-d02fffff *-multimedia description: Audio device product: NM10/ICH7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d0340000-d0343fff *-pci:0 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:3000(size=4096) memory:84000000-841fffff ioport:84200000(size=2097152) *-pci:1 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:4000(size=4096) memory:84400000-846fffff ioport:84700000(size=2097152) *-network description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d6:d2:35 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.13.0-29-generic firmware=15.32.2.9 ip=10.110.20.157 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:43 memory:84400000-84400fff *-pci:2 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:5000(size=4096) memory:84900000-84afffff ioport:84b00000(size=2097152) *-usb:0 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:1820(size=32) *-usb:1 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:1840(size=32) *-usb:2 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:1860(size=32) *-usb:3 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:1880(size=32) *-usb:4 description: USB controller product: NM10/ICH7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:23 memory:d0544000-d05443ff *-pci:3 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list resources: ioport:2000(size=4096) memory:d0000000-d00fffff ioport:80000000(size=67108864) *-pcmcia description: CardBus bridge product: PCIxx12 Cardbus Controller vendor: Texas Instruments physical id: 4 bus info: pci@0000:0a:04.0 version: 00 width: 32 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192 resources: irq:17 memory:d0004000-d0004fff ioport:2400(size=256) ioport:2800(size=256) memory:80000000-83ffffff memory:88000000-8bffffff *-firewire description: FireWire (IEEE 1394) product: PCIxx12 OHCI Compliant IEEE 1394 Host Controller vendor: Texas Instruments physical id: 4.1 bus info: pci@0000:0a:04.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm ohci bus_master cap_list configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=3 resources: irq:17 memory:d0007000-d00077ff memory:d0000000-d0003fff *-storage description: Mass storage controller product: 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) vendor: Texas Instruments physical id: 4.2 bus info: pci@0000:0a:04.2 version: 00 width: 32 bits clock: 33MHz capabilities: storage pm bus_master cap_list configuration: driver=tifm_7xx1 latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0005000-d0005fff *-generic description: SD Host controller product: PCIxx12 SDA Standard Compliant SD Host Controller vendor: Texas Instruments physical id: 4.3 bus info: pci@0000:0a:04.3 version: 00 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=sdhci-pci latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0007800-d00078ff *-network description: Ethernet interface product: PRO/100 VE Network Connection vendor: Intel Corporation physical id: 8 bus info: pci@0000:0a:08.0 logical name: eth0 version: 02 serial: 00:16:36:80:e9:92 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half latency=64 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10Mbit/s resources: irq:20 memory:d0006000-d0006fff ioport:2000(size=64) *-isa description: ISA bridge product: 82801GBM (ICH7-M) LPC Interface Bridge vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide description: IDE interface product: 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:18b0(size=16) *-serial UNCLAIMED description: SMBus product: NM10/ICH7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:18c0(size=32) *-scsi physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: ST9250421AS vendor: Seagate physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: SD13 serial: 5TH0B2HB size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000d7fd5 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 13bb4bdd-8cc9-40e2-a490-dbe436c2a02d size: 230GiB capacity: 230GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2014-06-01 17:37:01 filesystem=ext4 lastmountpoint=/ modified=2014-06-01 21:15:21 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2014-06-01 21:15:21 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 2037MiB capacity: 2037MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 2037MiB capabilities: nofs *-remoteaccess UNCLAIMED vendor: Intel physical id: 1 capabilities: inbound kyra@kyra-Satellite-P105:~$

  Read the article

• Maxtor 500GB external hard drive not being detected but power is going to it?

  - by ClarkeyBoy

  I have 2 * Maxtor Onetouch 4 Lite 500GB external hard drives (part no. 9NT2A4-500). They both used to work fine on my old laptop (an Acer) but I have not used them for about a year, since my laptop was stolen and I got this one (also an Acer [Aspire 7738G]). I have one plugged into the mains with one of the leads I believe was supplied with them. It appears to be receiving power as it is warm and the power light (on the unit itself) is on; also the mains adapter is fairly warm. I also have it plugged into my laptop with a USB lead which I have tested on my mp3 player (so I know it works). However my hard drive is not showing on my computer. I have tried checking for new hardware, installing the software that was supplied with it, checking drive letters in case it is registered as C: or something stupid, checking for problems etc... I can't find any cause for it to do this. It does appear to be starting up and, possibly, shutting down and restarting constantly (that's what it sounds like altho I can't be certain). I have had both hard drives stored in different places for the last year and they're both doing the same thing.. if it was only one then I'd guess it had got damaged or corrupted or something but since it is both I doubt this is it. The only things in common with both of them are the leads and the laptop, however I know the USB lead works and guess the mains lead works as there is power going to the unit. Has anyone come across this before or does anyone have any idea what the cause / solution to the problem is? Any help would be greatly appreciated. Regards, Richard

  Read the article

• problem transferring Win 7 operating system hard drive to be used as external hard drive

  - by itserich

  Win 7 Asus MA479 8GB Ram hard drives are 500GB The operating system was a Caviar Green, and I tried to exchange it for a Caviar Blue. The Caviar Blue took the install correctly, but the Green, the prior operating system hard drive, will not allow itself to be used as an external hard drive. I use TrueCrypt and tried to format the Green and it freezes each time at the very end of the encyrption of the partition. I took the Blue out of the system and tried to encrypt it, and same problem. I think there must be something on the hard drive that shows it was a system drive and it causes a conflict. I have tried writing over the system hard drive to fully erase everything but that does not work, it still freezes. The drives will work in a different pc, i.e. other pc where it never was the system drive. The external hard drive is connected esata through Thermaltake. I have used TrueCrypt on various pc's for years including this Win7 with no problem. Thank you.

  Read the article

• format/build raid 5 with one 4k drive, three 512b

  - by skidawgz

  I have 4 WD 1TB drives which I want to 4x1TB Raid5. I am not sure what course of action to take next. How do I configure my 4th drive (sde) to align with the rest? Will this affect performance? I rcv this msg (which brings me here to ask these question): The device presents a logical sector size that is smaller than the physical sector size. Aligning to a physical sector (or optimal I/O) size boundary is recommended, or performance may be impacted. fdisk -l shows: Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf324ba09 Device Boot Start End Blocks Id System /dev/sdb1 2048 1953525167 976761560 fd Linux raid autodetect Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x38bcc1f0 Device Boot Start End Blocks Id System /dev/sdc1 2048 1953525167 976761560 fd Linux raid autodetect Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x570f77e7 Device Boot Start End Blocks Id System /dev/sdd1 2048 1953525167 976761560 fd Linux raid autodetect Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xeb665e7b Device Boot Start End Blocks Id System

  Read the article

• Why is Ubuntu unmounting my primary hard drive?

  - by Twisol

  I'm running Ubuntu 10.10 on my laptop (an Asus G73j), dual-booting Windows 7 if that matters. After using the computer for couple of hours or so, I get a popup complaining that a file was unmounted, then my GNOME desktop panels disappear. I can't save any unsaved work (the file browser shows "Filesystem" as totally empty), and other programs break in odd ways (like Chrome can't browse to any new pages, but keeps current ones going... at least I still have Pandora to listen to when this happens!). I've tried looking in the system logs to no avail; I'm assuming that it can't write any errors to the logs because, of course, the logs are on the primary hard drives. This started happening maybe a few days ago. Yesterday I upgraded from 10.4, but I believe it was happening before then. Any advice for figuring this out? EDIT: It just happened again, and I heard a small little clicky sound from the hard drive about five seconds before things went south. I'm thinking I should start backing up ASAP. In response to a comment, here's the dmesg output: http://askubuntu.pastebin.com/uYGshBay Also, the SMART status says the disk has a few bad sectors, and the detailed data says there are 14. It says it passed the self-assessment though. Lastly, this doesn't seem to be happening when I'm on Windows. I recently re-enabled ureadahead (which I disabled ages ago because it was causing Ubuntu to hang at the startup logo), could that be the source of the problem? I've disabled it again to see.

  Read the article

• ubuntu precise high hard drive I/O

  - by pavolzetor

  on ubuntu precise, all apps starts slowly, and my hard drive is all time in use. What is the cause? it was never before, even nautilus takes a lot time to load, boot is also slower. top - 18:37:05 up 1:07, 1 user, load average: 2.03, 2.34, 2.25 Tasks: 182 total, 1 running, 180 sleeping, 0 stopped, 1 zombie Cpu(s): 30.2%us, 7.2%sy, 1.4%ni, 53.9%id, 7.1%wa, 0.0%hi, 0.2%si, 0.0%st Mem: 3941576k total, 3522048k used, 419528k free, 50156k buffers Swap: 0k total, 0k used, 0k free, 1827640k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2508 pk 20 0 1018m 189m 28m S 4 4.9 22:28.04 plugin-containe 1290 root 20 0 82336 16m 1492 S 2 0.4 0:04.41 landscape-clien 1305 root 20 0 97280 22m 5584 S 2 0.6 0:01.57 landscape-manag 4201 pk 20 0 17328 1312 924 R 2 0.0 0:00.02 top 1 root 20 0 24436 2364 1268 S 0 0.1 0:00.68 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.45 ksoftirqd/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.02 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 10 root 20 0 0 0 0 S 0 0.0 0:00.43 ksoftirqd/1 12 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/1 13 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset

  Read the article

• Plugging in USB flash drive only shows error 43, "Unknown device"

  - by Daren

  My friend saved by his works onto my flash drive which was detectable/openable, but ... The very next day, the drive wouldn't show up in My Computer and Windows gave him error code 43 (Unknown device). I tried others few systems that once detected his flash drive but the problem still persisted. I don't know whether or not his flash drive is damaged but when plug/un-plugging, there are still sounds coming out though. Tried solutions: On Vista Home Premium (his computer): Uninstalled -- Restarted computer -- Re-installed (ERROR 43) On Windows 7 (my computer): Uninstalled -- Restarted computer -- Can't install (ERROR 43) It seems that my computer (Windows 7) had the lastest drivers already but still can't detect it. Its a Kingston DataTraveller 101 (DT101) 8GB. Could unplugging the flash drive without clicking "Safely Remove Hardware" have caused the problem?

  Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >