Search Results

Search found 16386 results on 656 pages for 'flash drive'.

Page 23/656 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

  • Windows 7 immediately disconnects a USB drive

    - by Daniel Saner
    I am having a problem with Windows 7 x64 consistently disconnecting one specific USB mass storage drive immediately after it is connected. The drive in question is a Cowon C2 digital music player which works in standard mass storage controller mode (i.e. no device-specific drivers needed/available). When I connect the player, Windows plays the "USB connect" sound and the device appears (under its correct name) in the device manager, but it never appears as a drive. The player itself displays "USB Connected" for a split-second before reporting that it has been disconnected again. Since the player, by design, reboots after it has been disconnected, Windows plays the "USB disconnect" sound before restarting the whole cycle once the player has powered back on. I am connecting the player through an Intel X79 Chipset motherboard (Gigabyte GA-X79-UD3) to Windows 7 Pro 64-bit. The player used to work fine the first few times I connected it, showing up as an external drive; it only recently stopped working. It is not a problem with the player, since it works fine when connected to another computer, even such running the exact same operating system. It is also not a problem with the USB controller, since the issue is the same on both the Intel USB 2.0 and the Fresco Logic FL1009 USB 3.0 controller ports. I have also not had the problem with any other drive so far. Among the things I have tried so far: Disabling USB legacy mode in BIOS Disabling energy-saving power down for all USB controllers in Windows' device manager Removing and reinstalling Windows' USB mass storage driver Removing and reinstalling Intel and Fresco Logic USB controller driver Restoring the player to factory defaults None of these made a difference. Again, the player used to work fine on the exact same system just days ago; I didn't install any new hardware or drivers on it since then. I would be very grateful for any hints on what else to try. Edit: Here is another new hint; I found out that when I connect the drive before booting Windows, it is available in Windows Explorer as it should, and does not automatically disconnect. If I remove and reconnect it though, the infinite connect/disconnect-loop starts anew.

    Read the article

  • Use an Ubuntu Live CD to Securely Wipe Your PC’s Hard Drive

    - by Trevor Bekolay
    Deleting files or quickly formatting a drive isn’t enough for sensitive personal information. We’ll show you how to get rid of it for good using a Ubuntu Live CD. When you delete a file in Windows, Ubuntu, or any other operating system, it doesn’t actually destroy the data stored on your hard drive, it just marks that data as “deleted.” If you overwrite it later, then that data is generally unrecoverable, but if the operating system don’t happen to overwrite it, then your data is still stored on your hard drive, recoverable by anyone who has the right software. By securely delete files or entire hard drives, your data will be gone for good. Note: Modern hard drives are extremely sophisticated, as are the experts who recover data for a living. There is no guarantee that the methods covered in this article will make your data completely unrecoverable; however, they will make your data unrecoverable to the majority of recovery methods, and all methods that are readily available to the general public. Shred individual files Most of the data stored on your hard drive is harmless, and doesn’t reveal anything about you. If there are just a few files that you know you don’t want someone else to see, then the easiest way to get rid of them is a built-in Linux utility called shred. Open a terminal window by clicking on Applications at the top-left of the screen, then expanding the Accessories menu and clicking on Terminal. Navigate to the file that you want to delete using cd to change directories and ls to list the files and folders in the current directory. As an example, we’ve got a file called BankInfo.txt on a Windows NTFS-formatted hard drive. We want to delete it securely, so we’ll call shred by entering the following in the terminal window: shred <file> which is, in our example: shred BankInfo.txt Notice that our BankInfo.txt file still exists, even though we’ve shredded it. A quick look at the contents of BankInfo.txt make it obvious that the file has indeed been securely overwritten. We can use some command-line arguments to make shred delete the file from the hard drive as well. We can also be extra-careful about the shredding process by upping the number of times shred overwrites the original file. To do this, in the terminal, type in: shred –remove –iterations=<num> <file> By default, shred overwrites the file 25 times. We’ll double this, giving us the following command: shred –remove –iterations=50 BankInfo.txt BankInfo.txt has now been securely wiped on the physical disk, and also no longer shows up in the directory listing. Repeat this process for any sensitive files on your hard drive! Wipe entire hard drives If you’re disposing of an old hard drive, or giving it to someone else, then you might instead want to wipe your entire hard drive. shred can be invoked on hard drives, but on modern file systems, the shred process may be reversible. We’ll use the program wipe to securely delete all of the data on a hard drive. Unlike shred, wipe is not included in Ubuntu by default, so we have to install it. Open up the Synaptic Package Manager by clicking on System in the top-left corner of the screen, then expanding the Administration folder and clicking on Synaptic Package Manager. wipe is part of the Universe repository, which is not enabled by default. We’ll enable it by clicking on Settings > Repositories in the Synaptic Package Manager window. Check the checkbox next to “Community-maintained Open Source software (universe)”. Click Close. You’ll need to reload Synaptic’s package list. Click on the Reload button in the main Synaptic Package Manager window. Once the package list has been reloaded, the text over the search field will change to “Rebuilding search index”. Wait until it reads “Quick search,” and then type “wipe” into the search field. The wipe package should come up, along with some other packages that perform similar functions. Click on the checkbox to the left of the label “wipe” and select “Mark for Installation”. Click on the Apply button to start the installation process. Click the Apply button on the Summary window that pops up. Once the installation is done, click the Close button and close the Synaptic Package Manager window. Open a terminal window by clicking on Applications in the top-left of the screen, then Accessories > Terminal. You need to figure our the correct hard drive to wipe. If you wipe the wrong hard drive, that data will not be recoverable, so exercise caution! In the terminal window, type in: sudo fdisk -l A list of your hard drives will show up. A few factors will help you identify the right hard drive. One is the file system, found in the System column of  the list – Windows hard drives are usually formatted as NTFS (which shows up as HPFS/NTFS). Another good identifier is the size of the hard drive, which appears after its identifier (highlighted in the following screenshot). In our case, the hard drive we want to wipe is only around 1 GB large, and is formatted as NTFS. We make a note of the label found under the the Device column heading. If you have multiple partitions on this hard drive, then there will be more than one device in this list. The wipe developers recommend wiping each partition separately. To start the wiping process, type the following into the terminal: sudo wipe <device label> In our case, this is: sudo wipe /dev/sda1 Again, exercise caution – this is the point of no return! Your hard drive will be completely wiped. It may take some time to complete, depending on the size of the drive you’re wiping. Conclusion If you have sensitive information on your hard drive – and chances are you probably do – then it’s a good idea to securely delete sensitive files before you give away or dispose of your hard drive. The most secure way to delete your data is with a few swings of a hammer, but shred and wipe from a Ubuntu Live CD is a good alternative! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDScan a Windows PC for Viruses from a Ubuntu Live CDRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu 9.10 USB Flash DriveCreate a Bootable Ubuntu USB Flash Drive the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar

    Read the article

  • Flash - Uploading to and Downloading from localhost

    - by Md Derf
    I have an online flash application that acts as a front end for a server application built in delphi. The server can be installed/used on a remote computer or a personal version can be downloaded and the Flash app pointed at localhost to use it. However, Flash has issues with using the POST and GET functions on the localhost, which makes uploading data files and downloading results files difficult. To get past the difficulty with downloading results files I'm planning to just have the server app serve the results file as an attachment and have the Flash app open the address of the file up in another browser window using external interface. First off, is this likely to cause similar security issues? I.E. Flash will see "localhost" in the external interface call and stop it from working the same as when I try to use POST/GET functions with localhost? Secondly, for upload this seems just a bit little trickier, I'm planning on doing something similar, having flash use external interface to open a php script for a file upload. Is this feasible and, again, will Flash still have security issues? Lastly, if anyone knows how to get flash to execute POST and GET functions with localhost addresses, I'd love to have that information to avoid all this jumping through hoops.

    Read the article

  • Boot From a USB Drive Even if your BIOS Won’t Let You

    - by Trevor Bekolay
    You’ve always got a trusty bootable USB flash drive with you to solve computer problems, but what if a PC’s BIOS won’t let you boot from USB? We’ll show you how to make a CD or floppy disk that will let you boot from your USB drive. This boot menu, like many created before USB drives became cheap and commonplace, does not include an option to boot from a USB drive. A piece of freeware called PLoP Boot Manager solves this problem, offering an image that can burned to a CD or put on a floppy disk, and enables you to boot to a variety of devices, including USB drives. Put PLoP on a CD PLoP comes as a zip file, which includes a variety of files. To put PLoP on a CD, you will need either plpbt.iso or plpbtnoemul.iso from that zip file. Either disc image should work on most computers, though if in doubt plpbtnoemul.iso should work “everywhere,” according to the readme included with PLoP Boot Manager. Burn plpbtnoemul.iso or plpbt.iso to a CD and then skip to the “booting PLoP Boot Manager” section. Put PLoP on a Floppy Disk If your computer is old enough to still have a floppy drive, then you will need to put the contents of the plpbt.img image file found in PLoP’s zip file on a floppy disk. To do this, we’ll use a freeware utility called RawWrite for Windows. We aren’t fortunate enough to have a floppy drive installed, but if you do it should be listed in the Floppy drive drop-down box. Select your floppy drive, then click on the “…” button and browse to plpbt.img. Press the Write button to write PLoP boot manager to your floppy disk. Booting PLoP Boot Manager To boot PLoP, you will need to have your CD or floppy drive boot with higher precedence than your hard drive. In many cases, especially with floppy disks, this is done by default. If the CD or floppy drive is not set to boot first, then you will need to access your BIOS’s boot menu, or the setup menu. The exact steps to do this vary depending on your BIOS – to get a detailed description of the process, search for your motherboard’s manual (or your laptop’s manual if you’re working with a laptop). In general, however, as the computer boots up, some important keyboard strokes are noted somewhere prominent on the screen. In our case, they are at the bottom of the screen. Press Escape to bring up the Boot Menu. Previously, we burned a CD with PLoP Boot Manager on it, so we will select the CD-ROM Drive option and hit Enter. If your BIOS does not have a Boot Menu, then you will need to access the Setup menu and change the boot order to give the floppy disk or CD-ROM Drive higher precedence than the hard drive. Usually this setting is found in the “Boot” or “Advanced” section of the Setup menu. If done correctly, PLoP Boot Manager will load up, giving a number of boot options. Highlight USB and press Enter. PLoP begins loading from the USB drive. Despite our BIOS not having the option, we’re now booting using the USB drive, which in our case holds an Ubuntu Live CD! This is a pretty geeky way to get your PC to boot from a USB…provided your computer still has a floppy drive. Of course if your BIOS won’t boot from a USB it probably has one…or you really need to update it. Download PLoP Boot Manager Download RawWrite for Windows Similar Articles Productive Geek Tips Create a Bootable Ubuntu 9.10 USB Flash DriveReinstall Ubuntu Grub Bootloader After Windows Wipes it OutCreate a Bootable Ubuntu USB Flash Drive the Easy WayBuilding a New Computer – Part 3: Setting it UpInstall Windows XP on Your Pre-Installed Windows Vista Computer TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7

    Read the article

  • BIOS not detecting working SATA hard drive.

    - by Evan
    Some time ago my power supply died. It's a long story from then till now, but the important bit is that I ended up with a new hard drive and a new power supply. I tested to see if my original hard drive was still alive, and it booted and worked perfectly until I turned it off. When I started it again it would not boot. I bought new SATA cables, assuming that the one I had was not seating properly (it was cheap and wobbly), but no dice. Upon start-up I am presented with a message telling me to insert boot media into the selected drive or add a drive and restart. Neither the new or the old drive is detected by BIOS, my Vista install disk, or from my bootable Linux USB drive. When I remove all of the RAM the computer ceases outputting visual information, and upon reinstalling the ram and starting up again gives me a "failed overclock" error. So, does anyone have an idea as to what might be going on? I'm completely lost at this point.

    Read the article

  • BIOS not detecting working SATA hard drive

    - by user28927
    Some time ago my power supply died. It's a long story from then till now, but the important bit is that I ended up with a new hard drive and a new power supply. I tested to see if my original hard drive was still alive, and it booted and worked perfectly until I turned it off. When I started it again it would not boot. I bought new SATA cables, assuming that the one I had was not seating properly (it was cheap and wobbly), but no dice. Upon start-up I am presented with a message telling me to insert boot media into the selected drive or add a drive and restart. Neither the new or the old drive is detected by BIOS, my Vista install disk, or from my bootable Linux USB drive. When I remove all of the RAM the computer ceases outputting visual information, and upon reinstalling the ram and starting up again gives me a "failed overclock" error. So, does anyone have an idea as to what might be going on? I'm completely lost at this point.

    Read the article

  • SATA DVD drive refuses to read movie DVDs

    - by poke
    Hey, I have a problem with my DVD Drive (Asus DRW-2014L1T, most current firmware installed) on Windows 7 x64. When I insert a DVD movie and Windows starts to access the drive (for autoplay, or when I manually click on the drive icon), my computer hangs up in a particular way, while trying to read the disk. Explorer stops reacting and several programs won't run or their launch is horribly delayed (like the device manager). In th end, I can't access the movie and can't even eject the disk (probably because Windows is still trying to access it). To get the disk out of the drive I then have to reboot (which sometimes doesn't work either) and eject the disk before Windows boots. BIOS recognizes the drive just fine, and Windows is also able to read data disks (tried it with some software disks), but just refuses any movies. I have checked the region code in the device manager, but it is correct. My notebook is reading the disks just fine btw.. I remember having the same problem with an older drive as well, but I don't remember what I did to make it work again (maybe I didn't even fix the problem back then). I do remember however that booting with the disk inserted made Windows recognize the disk, however this doesn't work in this situation either. Do you have any idea what to do to fix that problem?

    Read the article

  • Recover data from hard drive with partitions (but not most data) overwritten

    - by Macha
    I have a 500GB hard drive I've been keeping around to recover data from that I removed from a failing NAS drive that got sort of... erratic at the end. I finally got rid of the NAS when during a firmware update it removed the partition table. Fast forward to a week ago, when I was building a new PC, and a mixup resulted in me placing the hard drive in question in the new PC and installing Windows XP on the first 100GB. I'm presuming any data on that first 100GB is now gone, but for the rest of it, is there any way I can recover it at home, as professional data recovery is currently too expensive? I have a blank 1TB HDD if I can store any images of that hard drive on. The problem was definitely with the NAS and not the hard drive, as the hard drive had a successful install of Windows when mistakenly place in the new PC, and there were capacitors in the NAS's circuitry clearly broken. The data I want to recover (in order of priority) is: High: Some jpgs of family photos. Medium: Some RAW files. (There are also jpg versions of all of these) Low: Some mp3s, avis and ISOs, I can re-rip most of these if need be, but it'd be handy not to have to. (I don't need a backup lecture, and if you can hold it in from nagging Jeff Atwood for it, you can hold it in from nagging me for it) In short: The partition tables are gone and overwritten. The data is not overwritten, except for an amount equal to the size of a Windows XP SP3 installation.

    Read the article

  • Replacing Failing RAID 1 Drive

    - by mrduclaw
    I hope this is a simple question, but I simply don't know anything about RAID. Some time ago I received a machine that, as I understand it, has two drives in it under RAID 1 (or so that one drive is mirrored on the other and appears as just 1 drive to the OS). Recently, one of these drives has started marking a clicking noise and I would like to replace it. I believe the machine has a hardware RAID controller on the motherboard that handles the RAID stuff, but if it matters the Operating System is Windows XP 32-bit. Is the solution to my problem as simple as buying another drive that is of the same capacity and plugging it in where the clicking drive is currently? Or could I possibly lose everything if the drive that's clicking is the one being mirrored on to the other drive? Is there some menu I need to find before unhooking things? Any best practices out there? I'm sure I'm leaving out some required information, so please just tell me what I'm missing. Thanks!

    Read the article

  • My Hard Drive isn't Working

    - by MeCB
    I never use Safely Remove Hardware with Windows XP. It has been working for me for years with my SD card, mouse, hard drive and memory stick. My hard drive has a USB cable and power cord so I can hook it up to any desktop hard drive. Now my hard drives don't like this and I did not know this till now. I am always careful and to wait till it is all finish accessing the USB before I unplug it. Now three of my hard drives can't be seen by Windows, though the others still work. when I hook it up to another computer it works fine. I use the same USB cable to hook up all of my hard drives one at a time. So my USB cable is good. I think that when I unplugged the hard drive this one time, it had a file it still wanted to see and now only this drive does not work only this computer. Then the same thing happens to my other two hard drive after I used it for a week with the same cables. How can I fix this?

    Read the article

  • how can i safely remove an external hard drive?

    - by Edmond Condillac
    Two of the three icons of the drive's partitions show on the desktop. One has disappeared and the contents are not accessible. Right clicking on the desktop icon of the partition gives the option to eject. Then the error message shows that the drive is busy and cannot be shut down. The drive is continually pinning. Kindly advise if possible how to safely remove the drive. Can the lost icon of the third drive and the datd contained in it be found, please? Kind regards

    Read the article

  • Ubuntu 12.04 - Pound Reverse Proxy and Adobe Flex/Flash Auth

    - by James
    First time posting, I have a completely fresh install of ubuntu 12.04 Client as a reverse proxy gateway to our internal network. Our setup is we have one external ip but three domains we would like to point to various webservers on our internal network. It's not so much a load balancing issue or cacheing etc. Merely routing some Client browsers to a port 80 webpage (to adhere to some stricter corporate policies regarding placing port numbers after domain names). I have gone with pound and everything seems to be working fine. Static pages load etc. Everything is good with the exception of a Flash/Flex based WebClient for a Digital Asset Management program. The actual static page loads fine, it is just at the moment of entering credentials, be they correct or incorrect, and hitting login, there is no response whatsoever. Either a rejection or confirmation etc. So the request back to the internal server can't be getting through. I have googled extensively and there might be a solution in a crossdomain.xml file? Documentation isn't very clear. And we are not the authors of the DAM app, and have no control over the code on the Flash/Flex side. Questions: Is there a particular config file/solution for pound that allows Flash/Flex auth information to be forwarded? Is there another reverse proxy program (nginx?)that allows this type of config? Am I looking at this the entire wrong way, should Flash/Flex fundamentally not be allowed to have this access?

    Read the article

  • USB Flash not recognised by Windows and BIOS, but works fine in Linux

    - by bbalegere
    I have a Transcend JetFLash 2GB USB Drive.It was working fine and I had been using it occasionally. All of sudden it stopped working in all versions of Windows . The USB Drive is also not recognised by the BIOS.It does not show in the list of bootable devices.(It used show up in the list earlier) However the USB Drive works fine in my Linux Mint 11 OS. Running dmesg gives this [ 941.812192] usb 1-2: new high speed USB device using ehci_hcd and address 4 [ 941.936178] usb 1-2: device descriptor read/64, error -71 [ 942.164188] usb 1-2: device descriptor read/64, error -71 [ 942.380189] usb 1-2: new high speed USB device using ehci_hcd and address 5 [ 942.504138] usb 1-2: device descriptor read/64, error -71 [ 942.732179] usb 1-2: device descriptor read/64, error -71 [ 942.948154] usb 1-2: new high speed USB device using ehci_hcd and address 6 [ 943.364134] usb 1-2: device not accepting address 6, error -71 [ 943.476172] usb 1-2: new high speed USB device using ehci_hcd and address 7 [ 943.892140] usb 1-2: device not accepting address 7, error -71 [ 943.892191] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 944.296190] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 944.438251] usb 2-2: not running at top speed; connect to a high speed hub [ 944.709928] usbcore: registered new interface driver uas [ 944.729999] Initializing USB Mass Storage driver... [ 944.730509] scsi6 : usb-storage 2-2:1.0 [ 944.730908] usbcore: registered new interface driver usb-storage [ 944.730917] USB Mass Storage support registered. [ 945.736320] scsi 6:0:0:0: Direct-Access JetFlash Transcend 2GB 8.07 PQ: 0 ANSI: 2 [ 945.744547] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 945.753316] sd 6:0:0:0: [sdb] 3944448 512-byte logical blocks: (2.01 GB/1.88 GiB) [ 945.758274] sd 6:0:0:0: [sdb] Write Protect is off [ 945.758288] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 945.765167] sd 6:0:0:0: [sdb] No Caching mode page present [ 945.765181] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 945.784309] sd 6:0:0:0: [sdb] No Caching mode page present [ 945.784323] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 946.239512] sdb: sdb1 [ 946.257279] sd 6:0:0:0: [sdb] No Caching mode page present [ 946.257292] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 946.257302] sd 6:0:0:0: [sdb] Attached SCSI removable disk Looks like there is something wrong the USB Drive.It is not recognised in any computer running Windows. Is there any way to fix this? Any idea why this problem occurred ?

    Read the article

  • I accidentally made my new hard drive (the non system drive) my primary partition

    - by qwerty2
    Hi all, When installing a new hard drive, I accidentally formatted it using 'Disk Management' and set it up as my primary active partition, even though it isn't the system drive. Then, when I restarted my machine, Windows wouldn't boot, citing a missing or corrupt SYSTEM folder. Can anyone help me re-enable the system hard drive as my primary active partition? Any help would be greatly appreciated.

    Read the article

  • Deleting old system folders from a drive that is no longer the windows installation drive

    - by grenade
    I dropped my laptop and was no longer able to boot. There were error messages about a corrupt boot record. Replacing the hard drive and reinstalling Win 7 was how I dealt with it. The old drive still appears to be good and I can read and write to it when I connect it as a second drive and mount as D:. However, if I try to recover the space being used by the windows, programdata, program files & program files(x86) folders, by deleting them I get error messages about needing permission from trustedinstaller. If I set myself as the owner of the folders and retry the delete I get error messages about needing permission from myself! Since I'm pretty sure that I have permission from myself to delete the folders, I can only assume that the OS or file system has gotten its panties twisted. I have tried shift, right click, delete from explorer and also if I run "del /f /s /q D:\Windows" from an admin command prompt, I get a succession of Access is denied messages as well. How do I delete D:\Windows, D:\ProgramData, D:\Program Files & D:\Program Files(x86) from a drive that is not the Windows installation drive?

    Read the article

  • Can&rsquo;t eject external USB or Firewire drive in Windows 7

    - by Kelly Jones
    As a SharePoint developer, I work a lot with Virtual Machines (presently using Windows Virtual PC, with Windows 7).  I’m using these VMs with my laptop, and in order to get better performance, I’ve moved them to external hard drives.  (These drives have faster RPMs, larger caches, and a larger capacity, than the internal drive.)  I have one large external drive at home, another similar drive at the office, and a small, slow portable drive that I carry with me. So, at the end of each day at the office, I copy the files from the external drive to my portable drive and then once I get home, I copy them from the portable to the larger external drive I leave at home.  I do this for a couple of reasons: so I can work at home and secondly, so I have backup copies.  (Often, I feel like I’m in the movie “Office Space” when copying the files before I leave the office). Anyway, after the files are copied, I safely eject the external drives, and then hibernate my laptop.  I’ve been doing this for over a year now, but within the last couple of months I started to have issues disconnecting the drives.  Intermittently, some application/process would have a lock on some file on the drive that would keep Windows from safely ejecting it. After looking into it, I found that it was actually the Windows search service that was accessing the drive! Since I wasn’t using Windows search to look for stuff on these drives, I removed them as locations to index. To do this in Windows 7, you need to go to Indexing Options (just type “Indexing” into the search box in the Start menu…).  One of the choices displayed will then be Indexing Options, so click on it and you should then see a window similar to this:   Click on the Modify button and you’ll see this window: Notice the different drives listed above.  My “FreeAgent XTreme (F:)” drive was checked for some reason, which was causing the indexing service to scan the drive looking for new files to make available in the search results.  Ever since I unchecked this box, I’ve been able to safely eject the drive.

    Read the article

  • [Flex] What is new functionality 'Sparks' that appears in the Flash Builder 4 ?

    - by ignatius
    Hello, i just checking Flash Builder 4 ( i come from Flex builder 3 ), and it was painfull to see that old CSS visual editor, that it was very convenient for skinning components, has dissapear when select version 4. Also creating new project appear option between Mxml and 'Mxml+Spark'. What is this spark? Do you recommend using this? What are the strong point over tradicional CSS editing? i am a little bit confused with this. Br.

    Read the article

  • Macbook Pro suddenly lagging video playback + Flash sites

    - by Mathias
    I have a Macbook Pro, OSx Lion, Intel Core2 Duo, 4GB Ram, NVidia Geforce 8600M GT 128 MB Ram, Intel x25m SSD. Approximately 4 years old. I've been running Flash sites and playing videos without any problems for years. Then suddenly 3 months ago, a flash site like http://thefwa.com is lagging in all browsers. Even mouseover animations - anything. Also video playback in e.g VLC and Quicktime is now lagging. Same videos I used before, I tried installing an older version of VLC without any luck. Playing back video in VLC utilizes the CPU almost 100%, and Flash sites like thefwa.com easily takes up 50-60%. It's as if the hardware acceleration stopped working, or the GPU lost its magic. UPDATE: Same issues also occurred on Snow Leopard Has anyone experienced something similar, or do you know what might be wrong?

    Read the article

  • Adobe Flash not working anymore with Browsers

    - by Marcus
    Hi guys, I have a really annoying problem: essentially, Adobe Flash is not working anymore. For instance, I cant watch any clip on youtube and I always get a black screen saying: Movie not loaded ... I have the newest Flash version (10.0.45.2), and the problem is the same with IE, Firefox or Chrome. I am using WIN XP and I turned of Antivirus software as well as Firewall, still I cant watch any flash stuff. Anyone an idea what could have happened in the last week? Never had a problem before that! Thanks!

    Read the article

  • Linux Flash Player with 2 Monitors: always full-screen on primary monitor

    - by CarlF
    My setup at home uses a laptop, with a larger external monitor in addition to the built-in LCD panel, which is primary. I can see the larger monitor from the rest of the room and use it as my TV, for playing DVDs and various types of web video. However, it isn't ideal for Flash video. For instance, if I watch a video from Hulu or any other Flash-based site, I can expand it to full-screen mode. However, no matter which monitor the browser window is on, the full-screen mode is always on the laptop LCD panel, which is both too small and not visible from most of the room. Does anyone know of a way to force the Flash video to play full-screen on the monitor I select instead of the primary? My video chipset is NVidia, using kernel 2.6.31 (Ubuntu). Thanks.

    Read the article

  • Streaming flash video does not work on my Mac OS X

    - by dehmann
    Flash videos do not work properly on my Mac. On this Vimeo video, for example, it shows only the beginning frame, and audio stutters like crazy, playing audio for a quarter second or so, then silence, then playing again, etc. I have Flash version 10,0,42,34 on Mac OS 10.5.8. It's a PowerBook G4 (PPC). I tried it in Firefox 3.5.5 and Safari 4.0.3. I tried reinstalling Flash, restarting the computer, and using a fresh user profile in Firefox (so that no extensions are interfering with the site), loading the video fully before playing, but nothing helps. I noticed that youtube videos work better, once loaded enough, although the picture does halt briefly once every 10 or so seconds, even when it's fully loaded.

    Read the article

  • How reliable are Compact Flash drives

    - by bakytn
    For example, USB drives have read/write limits. and they are considered as unreliable and not durable for daily use over many years. My question is, however, about Compact Flash drives. AFAIK they are built almost in the same way as USB flash drives. I was going to use one Compact Flash drive for daily usage and install a lightweight operating system to it (Linux). What kind of limitations do they have? Read/write operations? Just a time? something else? Thank you!

    Read the article

  • Mac OSX: Adobe Flash player 10.1.85.3 text issue

    - by sparkey
    Running Flash Player 10.1.85.3. on OS-X 10.6.4 I've run into a very strange issue with Adobe/Macromedia Flash. Text in dialogs sometimes is not displayed, and the containing boxes are distorted. It occurs in all browsers. This is best demonstrated on YouTube in some of their ads, as well as in Google Analytics overlays on graphs. You can see the issue here: As you can see, where I have moused over the high point, there should be a dialog with some text, but instead it is quite broken. I've tried uninstalling and reinstalling the Flash plugin several times, reinstalling Google Chrome, validating my fonts with FontBook (removed all dupes/ fonts with warnings). Also as a last resort I checked/ repaired perms on my disk. What should I do?

    Read the article

  • How to keep Flash secured with EMET?

    - by Indrek
    I use EMET to secure a number of applications on my computer - web browsers, Office suite applications, PDF readers, as well as Adobe Flash. Overall it's working great, except that the Flash executables contain the version number in the file name, so every time there's an update, the file names change and I have to remember to re-add them manually to EMET. Is there a way to streamline this process? EMET does support wildcards, but only in the path itself, not the file name, so something like %windir%\system32\Macromed\Flash\*.exe wouldn't work. Is there any other way to add a whole folder to EMET so that any new executables in that folder are automatically secured?

    Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >