Search Results

Search found 574 results on 23 pages for 'mkdir'.

Page 17/23 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• How do you create an ssh key for the apache user on Redhat?

  - by Josh Smeaton

  As the question asks, how do I generate an ssh key for the user apache on Redhat? My use case, is that we have a mercurial server running under the apache user. We also have several web servers clustered that we need to log on to manually and do pulls from. Ideally, what we'd like to do is have the mercurial server push all changes to all the webservers in the cluster. To do this, we want to use ssh, as setting up http mercurial servers on each of the web servers seems like too much work, and far too heavy. What I've tried to do is the following: > sudo mkdir /var/www/.ssh > sudo chown -R apache:nobody /var/www/.ssh > su - apache -c "ssh-keygen -t rsa" This account is currently not available. I found the above commands elsewhere, but I can only assume that Redhat has differences to whatever distro was used for the above. Is there a way I can generate an ssh-key for the apache user?

  Read the article

• Can't mount hard drive. Ubuntu 12.04

  - by Sam

  I am trying to recover some pictures on my 320 GB Hard Disk, so I put in a Live Ubuntu CD and am in that right now. In the devices list, it shows my USB drive, but not my 320 GB Hard Disk. I can see the disk in Disk Utility (it says it's on /dev/sda), but it's not mounted, and it says it has a few bad sectors but it is OK. In Disk Usage Analyzer, it says my maximum capacity is 13.4 GB, so it's definitely not using the 320 GB Hard Disk. I tried the following: sudo mkdir /media/newhd (worked) sudo mount /dev/sda /media/newhd (didn't work. it says I must specify the filesystem type) I then tried: fsck.ext4 -f /dev/sda (didn't work. Said: Superblock invalid, trying to backup blocks. then: Bad magic number in super-block while trying to open /dev/sda. The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock) Does anyone have any ideas? The whole problem started when my Windows Vista said "Can't find operating system". Any ideas on how I can get on to my hard drive at /dev/sda?

  Read the article

• Master does not appear to be a git repository error

  - by EmmyS

  I've inherited a position and instructions for creating a new git repository. Unfortunately I've run into problems and no one here knows what to do. Hoping someone can help me out. Here are the instructions I was left: Create a new repository: For these steps you need to be in the gitosis-admin repository, if you don't have it, in a suitable parent folder do: git clone [email protected]:gitosis-admin.git Edit gitosis.conf file - in gitosis-admin root, under [group base-repo] section, add the name of the new repo to the end of the "writable =" section. Commit change and push back to gitosis-admin master. For the next commands, my_new_project represents the name of your project mkdir my_new_project cd my_new_project git init Copy in any files you want to use to start the repo git commit -a -m "Initializing new repository" git remote add origin [email protected]:my_new_project.git git push master git push master:qa So I did 1 and 2, with no problem. It created a local folder on my machine called gitosis-admin. I edited the gitosis.conf file as indicated. But when I try to do step 3 (which I assume is git push gitosis-admin master) bash tells me that fatal: 'master' does not appear to be a git repository fatal: The remote end hung up unexpectedly What am I doing wrong?

  Read the article

• Using sed to Download ComboFix automatically

  - by user901398

  I'm trying to write a shell script to grab the dynamic URL which ComboFix is located at at BleepingComputer.com/download/combofix However, for some reason I can't seem to get my regex to match the download link of the "click here" if the download doesn't work. I used a regex tester and it said I matched the link, but I can't seem to get it to work when I execute it, it turns up an empty result. Here's my entire script: #!/bin/bash # Download latest ComboFix from BleepingComputer wget -O Listing.html "http://www.bleepingcomputer.com/download/combofix/" -nv downloadpage=$(sed -ne 's@^.*<a href="\(http://www[.]bleepingcomputer[.]com/download/combofix/dl/[0-9]\+/\)" class="goodurl">.*$@\1@p' Listing.html) echo "DL Page: $downloadpage" secondpage="$downloadpage" wget -O Download.html $secondpage -nv file=$(sed -ne 's@^.*<a href="\(http://download[.]bleepingcomputer[.]com/dl/[0-9A-Fa-f]\+/[0-9A-Fa-f]\+/windows/security/anti[-]virus/c/combofix/ComboFix[.]exe\)">.*$@\1@p' Download.html) echo "File: $file" wget -O "ComboFix.exe" "$file" -nv rm Listing.html rm Download.html mkdir Tools mv "ComboFix.exe" "Tools/ComboFix.exe" -f The first two downloads work successfully, and I end up with: http://www.bleepingcomputer.com/download/combofix/dl/12/ But it fails to match the final sed that will give me the download link. The code it's supposed to match is: <a href="http://download.bleepingcomputer.com/dl/6c497ccbaff8226ec84c97dcdfc3ce9a/5058d931/windows/security/anti-virus/c/combofix/ComboFix.exe">click here</a>

  Read the article

• How to add a writable folder to the PHP document root on linux

  - by Ron Whites

  We are building an example bash script for our PHP TestCoverage Tool use on Linux. The development environment is Ubuntu 12.04_1 but we intend to have the linux example work across as many linux versions as possible without modification. The example linux script requires a variable be set to the PHP Document Root path and by default uses a small PHP example source to show the user how our GUI and text report shows the covered and uncovered PHP code areas. The linux script is also intended to be easily alterable by the user to automate the TestCoverage display of users PHP code. The problem we are having with Ubuntu 12.04 (any linux?) is that the PHP Apache2 document root is defined in /etc/apache2/sites-available/default as /var/www and /var/www is defaulted with "drwxr-xr-x" read only access. So in order to add our own folder as /var/www/SDTestCoverage we must change /var/www to "drwxrwxrwx" read-write access. So it seems our script (at least on Ubuntu) will need to ... 1. acquire and save the /var/www permissions then do .. 2. sudo chmod 777 /var/www (to make writable) 3. mkdir -p /var/www/SDTestCoverage (create our folder under the document root) 4. sudo chmod 777 /var/www/SDTestCoverage (make our subfolder writable) 5. and finally restore /var/www permissions Thanks and our Questions are .. 1. Is this the standard way (using Ubuntu) one adds a writable folder under the PHP Document Root? 2. Is this the most general purpose way one adds a writable folder under the PHP Document Root on other versions of Linux?

  Read the article

• Common folder in linux

  - by rks171

  I have two users on my Ubuntu machine. I want to share some media files between these users, so I created a directory in /home/ called 'media'. I made the group 'media' and I added my user 'rks171' to the group 'media'. So: sudo groupadd media sudo mkdir -p /home/media sudo chown -R root.media /home/media sudo chmod g+s /home/media As was described in this post. Then, I added my user to the group: sudo usermod -a -G media rks171 Then I also added write permission to this folder for my group: sudo chmod -R g+w media So now, doing 'ls -lh' gives: drwxrwsr-x 2 root media 4.0K Oct 6 09:46 media I tried to copy pictures to this new directory from my user directory: mv /home/rks171/Pictures/* /home/media/ And I get 'permission denied'. I can't understand what's wrong. If I simply type, 'id', it doesn't show that my user, rks171, is part of the 'media' group. But if I type, 'id rks171', then it does show that my user, rks171, is part of the 'media' group. Anybody have any ideas why I can't get an files into this common folder?

  Read the article

• Is there a way to use VirtualBox without using it's resource registry?

  - by Catskul

  Summary VirtualBox seems to want everything to be "registered" which makes it much more annoying to work with on the command line. I'm attempting to create an automated script which will create, move, start, stop, and destroy virtual machines and virtual disks. Requiring registration will complicate the task for the following reasons. leaves state information around that can cause unpredicted edgecases causing scripts to fail. creates potential name space collisions for multiple process creating VMs with the same name moving/copying resources on the same machine is more complicated because references in the registry need to be updated copying resources (disk + vm combination) to another machine require reconfiguration once they reach their target machine, and require the transfer of extra meta data to do the reconfiguration. If something unexpectedly fails, and an unregister thus fails to happen, left over configuration information can cause problems in subsequent runs. Use Case My specific use case is for a continuous integration server which creates and destroys VMs and Disk images potentially with the same name, and would require more logic to deal with the registry's statefulness. Imaginary Example It seems that I should just be able to for example (using some imaginary and/or incorrect commands): mkdir foobar customdiskimg_script ./foo/foo.vdi vboxmanage createvm --name "foo" --ostype Linux --basefolder ./foo/foo.xml vboxmanage storagectl ./foo/foo.xml --name foo --add ide vboxmanage storageattach --storagectl foo --medium ./foo/foo.vdi ./foo/foo.xml vboxmanage startvm ./foo/foo.xml TLDR Is there a way to use virtualbox without "registering" harddisks and VMs?

  Read the article

• Why can I not edit, delete directories inside of this directory

  - by user43053

  Hello there, First, I thought this was PHP related, but maybe it isn't. My original post, which may be irrelevant now is located at the bottom. The problem is I have a directory : /articles/. In it are 10 sub directories. I have been changing the permissions lately, but now it seems all the permissions of the parent folder, sub-folders and files are either chmod 755 or 777. I cannot move, delete or edit files inside of this parent directory or sub-directories with my FTP-client. I can however edit, delete, create new files and directories and change them with PHP-functions without problems. What may the problem be? OLD POST. Ignore everything below this line: If I create a directory with mkdir(), or create a file with fopen(), file_put_contents() or SimpleXMLElement::asXML(), I am unable to access the file with my FTP-client or c-Panel File Manager. If I try to delete or edit them, I get errors. Dreamweaver suggests it is a permission problem or a network or filesystem fault (but I've set the permissions with chmod() to 0777, and when I check the cPanel, it confirms chmod 777. I also tried to use fileowner() and the function returns int(99), the same owner as those files that I could access with my FTP-client. It seems files and directories created with PHP can only be modified or be deleted with PHP. I thought this must be a server setup related issue, so I write it here. I am on a shared server, and I have no idea about setting up servers. EDIT: It seems the problem is different. I cannot move files with FTP-client to the parent, or sub-directories either. This problem may not be PHP related, then. It seems the problem applies to any directory, regardless of whether it was created by PHP. EDIT 2: The parent directory has chmod 755. Thank you for your time. Kind regards Marius

  Read the article

• Compiling OpenCV in Android NDK

  - by evident

  PLEASE SEE THE ADDITIONS AT THE BOTTOM! The first problem is solved in Linux, not under Windows and Cygwin yet, but there is a new problem. Please see below! I am currently trying to compile OpenCV for Android NDK so that I can use it in my apps. For this I tried to follow this guide: http://www.stanford.edu/~zxwang/android_opencv.html But when compiling the downloaded stuff with ndk-build I get this error: $ /cygdrive/u/flori/workspace/android-ndk-r5b/ndk-build Compile++ thumb : opencv <= cvjni.cpp Compile++ thumb : cxcore <= cxalloc.cpp Compile++ thumb : cxcore <= cxarithm.cpp Compile++ thumb : cxcore <= cxarray.cpp Compile++ thumb : cxcore <= cxcmp.cpp Compile++ thumb : cxcore <= cxconvert.cpp Compile++ thumb : cxcore <= cxcopy.cpp Compile++ thumb : cxcore <= cxdatastructs.cpp Compile++ thumb : cxcore <= cxdrawing.cpp Compile++ thumb : cxcore <= cxdxt.cpp Compile++ thumb : cxcore <= cxerror.cpp Compile++ thumb : cxcore <= cximage.cpp Compile++ thumb : cxcore <= cxjacobieigens.cpp Compile++ thumb : cxcore <= cxlogic.cpp Compile++ thumb : cxcore <= cxlut.cpp Compile++ thumb : cxcore <= cxmathfuncs.cpp Compile++ thumb : cxcore <= cxmatmul.cpp Compile++ thumb : cxcore <= cxmatrix.cpp Compile++ thumb : cxcore <= cxmean.cpp Compile++ thumb : cxcore <= cxmeansdv.cpp Compile++ thumb : cxcore <= cxminmaxloc.cpp Compile++ thumb : cxcore <= cxnorm.cpp Compile++ thumb : cxcore <= cxouttext.cpp Compile++ thumb : cxcore <= cxpersistence.cpp Compile++ thumb : cxcore <= cxprecomp.cpp Compile++ thumb : cxcore <= cxrand.cpp Compile++ thumb : cxcore <= cxsumpixels.cpp Compile++ thumb : cxcore <= cxsvd.cpp Compile++ thumb : cxcore <= cxswitcher.cpp Compile++ thumb : cxcore <= cxtables.cpp Compile++ thumb : cxcore <= cxutils.cpp StaticLibrary : libstdc++.a StaticLibrary : libcxcore.a Compile++ thumb : cv <= cvaccum.cpp Compile++ thumb : cv <= cvadapthresh.cpp Compile++ thumb : cv <= cvapprox.cpp Compile++ thumb : cv <= cvcalccontrasthistogram.cpp Compile++ thumb : cv <= cvcalcimagehomography.cpp Compile++ thumb : cv <= cvcalibinit.cpp Compile++ thumb : cv <= cvcalibration.cpp Compile++ thumb : cv <= cvcamshift.cpp Compile++ thumb : cv <= cvcanny.cpp Compile++ thumb : cv <= cvcolor.cpp Compile++ thumb : cv <= cvcondens.cpp Compile++ thumb : cv <= cvcontours.cpp Compile++ thumb : cv <= cvcontourtree.cpp Compile++ thumb : cv <= cvconvhull.cpp Compile++ thumb : cv <= cvcorner.cpp Compile++ thumb : cv <= cvcornersubpix.cpp Compile++ thumb : cv <= cvderiv.cpp Compile++ thumb : cv <= cvdistransform.cpp Compile++ thumb : cv <= cvdominants.cpp Compile++ thumb : cv <= cvemd.cpp Compile++ thumb : cv <= cvfeatureselect.cpp Compile++ thumb : cv <= cvfilter.cpp Compile++ thumb : cv <= cvfloodfill.cpp Compile++ thumb : cv <= cvfundam.cpp Compile++ thumb : cv <= cvgeometry.cpp Compile++ thumb : cv <= cvhaar.cpp Compile++ thumb : cv <= cvhistogram.cpp Compile++ thumb : cv <= cvhough.cpp Compile++ thumb : cv <= cvimgwarp.cpp Compile++ thumb : cv <= cvinpaint.cpp Compile++ thumb : cv <= cvkalman.cpp Compile++ thumb : cv <= cvlinefit.cpp Compile++ thumb : cv <= cvlkpyramid.cpp Compile++ thumb : cv <= cvmatchcontours.cpp Compile++ thumb : cv <= cvmoments.cpp Compile++ thumb : cv <= cvmorph.cpp Compile++ thumb : cv <= cvmotempl.cpp Compile++ thumb : cv <= cvoptflowbm.cpp Compile++ thumb : cv <= cvoptflowhs.cpp Compile++ thumb : cv <= cvoptflowlk.cpp Compile++ thumb : cv <= cvpgh.cpp Compile++ thumb : cv <= cvposit.cpp Compile++ thumb : cv <= cvprecomp.cpp Compile++ thumb : cv <= cvpyramids.cpp Compile++ thumb : cv <= cvpyrsegmentation.cpp Compile++ thumb : cv <= cvrotcalipers.cpp Compile++ thumb : cv <= cvsamplers.cpp Compile++ thumb : cv <= cvsegmentation.cpp Compile++ thumb : cv <= cvshapedescr.cpp Compile++ thumb : cv <= cvsmooth.cpp Compile++ thumb : cv <= cvsnakes.cpp Compile++ thumb : cv <= cvstereobm.cpp Compile++ thumb : cv <= cvstereogc.cpp Compile++ thumb : cv <= cvsubdivision2d.cpp Compile++ thumb : cv <= cvsumpixels.cpp Compile++ thumb : cv <= cvsurf.cpp Compile++ thumb : cv <= cvswitcher.cpp Compile++ thumb : cv <= cvtables.cpp Compile++ thumb : cv <= cvtemplmatch.cpp Compile++ thumb : cv <= cvthresh.cpp Compile++ thumb : cv <= cvundistort.cpp Compile++ thumb : cv <= cvutils.cpp StaticLibrary : libcv.a SharedLibrary : libopencv.so U:/flori/workspace/android-ndk-r5b/toolchains/arm-linux-androideabi-4.4.3/prebui lt/windows/bin/../lib/gcc/arm-linux-androideabi/4.4.3/../../../../arm-linux-andr oideabi/bin/ld.exe: cannot find -lcxcore collect2: ld returned 1 exit status make: *** [/cygdrive/u/flori/workspace/android/testOpenCV/obj/local/armeabi/libo pencv.so] Error 1 I am trying to compile it on a Windows system and with the newest NDK version... Does anybody have an idea what this linking error means and what I can to to have it work again? Would be great if anybody could help After getting the problem to work I found that there is another way of compiling OpenCV for Android, using the current version of OpenCV (instead of the 1.1 one from above) and the modified Android NDK from crystax, which supports STL and exceptions and therefore supports the newest OpenCV Version. All information on that can be found here: http://opencv.willowgarage.com/wiki/Android There it says to download the current svn trunk and the crystax-r4 android-ndk, as well as swig, which I did. I entered the folder, created the build directory, ran cmake and then built the static libs, which seemed to work. At least it successfully ran the make-command without errors. I now wanted to build the shared libraries so I entered the android-jni folder and ran 'make' again, but got this error: % make -j4 OPENCV_CONFIG = ../build/android-opencv.mk make clean-swig &&\ mkdir -p jni/gen &&\ mkdir -p src/com/opencv/jni &&\ swig -java -c++ -package "com.opencv.jni" \ -outdir src/com/opencv/jni \ -o jni/gen/android_cv_wrap.cpp jni/android-cv.i OPENCV_CONFIG = ../build/android-opencv.mk make[1]: Entering directory `/home/florian/android-opencv-willowgarage/android/android-jni' make[1]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule. rm -f jni/gen/android_cv_wrap.cpp make[1]: Leaving directory `/home/florian/android-opencv-willowgarage/android/android-jni' /home/florian/android-ndk-r4-crystax/ndk-build OPENCV_CONFIG=../build/android-opencv.mk \ PROJECT_PATH= ARM_TARGETS="armeabi armeabi-v7a" V= /home/florian/android-ndk-r4-crystax/ndk-build OPENCV_CONFIG=../build/android-opencv.mk \ PROJECT_PATH= ARM_TARGETS="armeabi armeabi-v7a" V= make[1]: Entering directory `/home/florian/android-opencv-willowgarage/android/android-jni' /home/florian/android-opencv-willowgarage/android/android-jni/jni/Android.mk:10: ../build/android-opencv.mk: No such file or directory make[1]: Entering directory `/home/florian/android-opencv-willowgarage/android/android-jni' /home/florian/android-opencv-willowgarage/android/android-jni/jni/Android.mk:10: ../build/android-opencv.mk: No such file or directory /home/florian/android-opencv-willowgarage/android/android-jni/jni/Android.mk:10: ../build/android-opencv.mk: No such file or directory make[1]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule. /home/florian/android-opencv-willowgarage/android/android-jni/jni/Android.mk:10: ../build/android-opencv.mk: No such file or directory make[1]: *** No rule to make target `../build/android-opencv.mk'. Stop. make[1]: Leaving directory `/home/florian/android-opencv-willowgarage/android/android-jni' make: *** [libs/armeabi/libandroid-opencv.so] Error 2 make: *** Waiting for unfinished jobs.... make[1]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule. make[1]: *** No rule to make target `../build/android-opencv.mk'. Stop. make[1]: Leaving directory `/home/florian/android-opencv-willowgarage/android/android-jni' make: *** [libs/armeabi-v7a/libandroid-opencv.so] Error 2 Does anybody have an idea what this means and what I can do to build the shared libraries? ... Ok after having a look at the error message it came to me that it seems to have something missing in the build directory... but there wasn't even a build directory in the android folder so I created one, ran 'cmake' in there and 'make' again but get this error: Compile thumb : opencv_lapack <= /home/florian/android-opencv-willowgarage/3rdparty/lapack/sgetrf.c Compile thumb : opencv_lapack <= /home/florian/android-opencv-willowgarage/3rdparty/lapack/scopy.c Compile++ thumb: opencv_core <= /home/florian/android-opencv-willowgarage/modules/core/src/matrix.cpp cc1plus: error: /home/florian/android-opencv-willowgarage/android/../modules/index.rst/include: Not a directory make[3]: *** [/home/florian/android-opencv-willowgarage/android/build/obj/local/armeabi/objs/opencv_core/src/matrix.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[2]: *** [android-opencv] Error 2 make[1]: *** [CMakeFiles/ndk.dir/all] Error 2 make: *** [all] Error 2 Anybody know what this means?

  Read the article

• Git: Remove specific commit

  - by Joshua Cheek

  I was working with a friend on a project, and he edited a bunch of files that shouldn't have been edited. Somehow I merged his work into mine, either when I pulled it, or when I tried to just pick the specific files out that I wanted. I've been looking and playing for a long time, trying to figure out how to remove the commits that contain the edits to those files, it seems to be a toss up between revert and rebase, and there are no straightforward examples, and the docs assume I know more than I do. So here is a simplified version of the question: Given the following scenario, how do I remove commit 2? $ mkdir git_revert_test && cd git_revert_test $ git init Initialized empty Git repository in /Users/josh/deleteme/git_revert_test/.git/ $ echo "line 1" > myfile $ git add -A $ git commit -m "commit 1" [master (root-commit) 8230fa3] commit 1 1 files changed, 1 insertions(+), 0 deletions(-) create mode 100644 myfile $ echo "line 2" >> myfile $ git commit -am "commit 2" [master 342f9bb] commit 2 1 files changed, 1 insertions(+), 0 deletions(-) $ echo "line 3" >> myfile $ git commit -am "commit 3" [master 1bcb872] commit 3 1 files changed, 1 insertions(+), 0 deletions(-) The expected result is $ cat myfile line 1 line 3 Here is an example of how I have been trying to revert $ git revert 342f9bb Automatic revert failed. After resolving the conflicts, mark the corrected paths with 'git add <paths>' or 'git rm <paths>' and commit the result.

  Read the article

• How do I install LFE on Ubuntu Karmic?

  - by karlthorwald

  Erlang was already installed: $dpkg -l|grep erlang ii erlang 1:13.b.3-dfsg-2ubuntu2 Concurrent, real-time, distributed function ii erlang-appmon 1:13.b.3-dfsg-2ubuntu2 Erlang/OTP application monitor ii erlang-asn1 1:13.b.3-dfsg-2ubuntu2 Erlang/OTP modules for ASN.1 support ii erlang-base 1:13.b.3-dfsg-2ubuntu2 Erlang/OTP virtual machine and base applica ii erlang-common-test 1:13.b.3-dfsg-2ubuntu2 Erlang/OTP application for automated testin ii erlang-debugger 1:13.b.3-dfsg-2ubuntu2 Erlang/OTP application for debugging and te ii erlang-dev 1:13.b.3-dfsg-2ubuntu2 Erlang/OTP development libraries and header [... many more] Erlang seems to work: $ erl Erlang R13B03 (erts-5.7.4) [source] [64-bit] [smp:2:2] [rq:2] [async-threads:0] [hipe] [kernel-poll:false] Eshell V5.7.4 (abort with ^G) 1> I downloaded lfe from github and checked out 0.5.2: git clone http://github.com/rvirding/lfe.git cd lfe git checkout -b local0.5.2 e207eb2cad $ configure configure: command not found $ make mkdir -p ebin erlc -I include -o ebin -W0 -Ddebug +debug_info src/*.erl #erl -I -pa ebin -noshell -eval -noshell -run edoc file src/leex.erl -run init stop #erl -I -pa ebin -noshell -eval -noshell -run edoc_run application "'Leex'" '"."' '[no_packages]' #mv src/*.html doc/ Must be something stupid i missed :o $ sudo make install make: *** No rule to make target `install'. Stop. $ erl -noshell -noinput -s lfe_boot start {"init terminating in do_boot",{undef,[{lfe_boot,start,[]},{init,start_it,1},{init,start_em,1}]}} Crash dump was written to: erl_crash.dump init terminating in do_boot () Is there an example how I would create a hello world source file and compile and run it?

  Read the article

• Compiling cpp code in netbeans produce errors, how to solve it ?

  - by Rupertt Wind

  i use the netbeans with MinGW and MYSY make /debugger but when i compile a basic cpp code in it and run it it produces two erorrs this is the code runned and the output![alt text][1] box #include <iostream> void main() { cout << "Hello World!" << endl; cout << "Welcome to C++ Programming" << endl; } output is /usr/bin/make -f nbproject/Makefile-Debug.mk SUBPROJECTS= .build-conf make[1]: Entering directory `/d/Users/Home/Documents/NetBeansProjects/newApp' /usr/bin/make -f nbproject/Makefile-Debug.mk dist/Debug/MinGW-Windows/newapp.exe make[2]: Entering directory `/d/Users/Home/Documents/NetBeansProjects/newApp' mkdir -p dist/Debug/MinGW-Windows g++.exe -o dist/Debug/MinGW-Windows/newapp build/Debug/MinGW-Windows/newmain.o build/Debug/MinGW-Windows/newfile.o build/Debug/MinGW-Windows/main.o build/Debug/MinGW-Windows/newfile.o: In function `main': D:/Users/Home/Documents/NetBeansProjects/newApp/newfile.cpp:5: multiple definition of `main' build/Debug/MinGW-Windows/newmain.o:D:/Users/Home/Documents/NetBeansProjects/newApp/newmain.c:15: first defined here build/Debug/MinGW-Windows/main.o: In function `main': D:/Users/Home/Documents/NetBeansProjects/newApp/main.cpp:13: multiple definition of `main' build/Debug/MinGW-Windows/newmain.o:D:/Users/Home/Documents/NetBeansProjects/newApp/newmain.c:15: first defined here collect2: ld returned 1 exit status make[2]: *** [dist/Debug/MinGW-Windows/newapp.exe] Error 1 make[2]: Leaving directory `/d/Users/Home/Documents/NetBeansProjects/newApp' make[1]: *** [.build-conf] Error 2 make[1]: Leaving directory `/d/Users/Home/Documents/NetBeansProjects/newApp' make: *** [.build-impl] Error 2 BUILD FAILED (exit value 2, total time: 1s) how can i solve this ?

  Read the article

• In Mercurial, what is the exact step that Peter or me has to do so that he gets back the rolled back

  - by Jian Lin

  The short question is: if I hg rollback, how does Peter get my rolled back version if he cloned from me? What are the exact steps he or me has to do or type? This is related to http://stackoverflow.com/questions/3034793/in-mercurial-when-peter-hg-clone-me-and-i-commit-and-he-pull-and-update-he-g The details: After the following steps, Mary has 7 and Peter has 11. My repository is 7 What are the exact steps Peter or me has to do or type SO THAT PETER GETS 7 back? F:\>mkdir hgme F:\>cd hgme F:\hgme>hg init F:\hgme>echo the code is 7 > code.txt F:\hgme>hg add code.txt F:\hgme>hg commit -m "this is version 1" F:\hgme>cd .. F:\>hg clone hgme hgpeter updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved F:\>cd hgpeter F:\hgpeter>type code.txt the code is 7 F:\hgpeter>cd .. F:\>cd hgme F:\hgme>notepad code.txt [now i change 7 to 11] F:\hgme>hg commit -m "this is version 2" F:\hgme>cd .. F:\>cd hgpeter F:\hgpeter>hg pull pulling from f:\hgme searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (run 'hg update' to get a working copy) F:\hgpeter>hg update 1 files updated, 0 files merged, 0 files removed, 0 files unresolved F:\hgpeter>type code.txt the code is 11 F:\hgpeter>cd .. F:\>cd hgme F:\hgme>hg rollback rolling back last transaction F:\hgme>cd .. F:\>hg clone hgme hgmary updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved F:\>cd hgmary F:\hgmary>type code.txt the code is 7 F:\hgmary>cd .. F:\>cd hgpeter F:\hgpeter>hg pull pulling from f:\hgme searching for changes no changes found F:\hgpeter>hg update 0 files updated, 0 files merged, 0 files removed, 0 files unresolved F:\hgpeter>type code.txt the code is 11 F:\hgpeter>

  Read the article

• PackageMaker install script for rxtx

  - by vinzenzweber

  I am using PackageMaker to create an installer for my application. During installation I need to run a bash script to properly install rxtx, a JNI library for serial port communication. This library needs to have the directory /var/lock in place with user "root" and group "uucp". The installation script also needs to add the current user to the group "uucp" for the lib to be able to write to /var/lock. Now when I run my application installer the preinstall script is run as root. Therefore "whoami" returns root instead of the user who is actually running the installer. The result is that rxtx is not able to create lock files in /var/lock because the actual user was not added as a member to "uucp". How can I get the user while my script is run by the installer. Or is it better to set the permissions for /var/lock to a different group maybe? Any suggestions are welcome! !/bin/sh curruser=whoami logger "Setting permissions for /var/lock for user $curruser!" if [ ! -d /var/lock ] then logger "Creating /var/lock!" sudo mkdir /var/lock fi sudo chgrp uucp /var/lock sudo chmod 775 /var/lock MacOSX 10.5 and later use dscl if [ sudo dscl . -read /Groups/uucp GroupMembership | grep $curruser | wc -l = "0" ] then logger "Add user $curruser to /Groups/uucp!" sudo dscl . -append /Groups/uucp GroupMembership $curruser # to revert use: # sudo dscl . -delete /Groups/uucp GroupMembership $curruser else logger "GroupMembership of /var/lock not changed!" fi

  Read the article

• An SVN error (200 OK) when checking out from my online repo

  - by J. LaRosee

  I'm trying to setup my first repo on my host and am getting this error when I use Tortoise to checkout the project: Error: OPTIONS of 'http://mywebsite.com/svn/myproject': 200 OK (http://mywebsite.com) Here is what I did: 1) ssh into my host and head to /home/myaccnt and 'svnadmin create svn' 2) create my project repo: 'svn mkdir svn/myproject' 3) add files to the repo: cd /home/myaccnt/.../myproject (which has /tags, /branch, /trunk); 'svn import file:///home/myaccnt/svn/myproject' (the big ole list of files being added is seen at this point.) At this point I think that I've setup my repo and imported my project into the repo. So, I'm ready to checkout using TortoiseSVN on my Windows box. So: 4) In the folder I'd like to checkout to, I rightclick and 'SVN Checkout' and then make sure my URL is: http://mywebsite.com/svn/myproject Result? Error: OPTIONS of 'http://mywebsite.com/svn/myproject': 200 OK (http://mywebsite.com) Anyone have any thoughts for me? I'm likely missing something fundemental w/ the structure of my repo or htaccess... or something. Many thanks in advance. -JL

  Read the article

• Having Uploadify e-mail a link to download the file

  - by kwek-kwek

  Uploadify is a jQuery plugin that allows the easy integration of a multiple (or single) file uploads on your website. It requires Flash and any backend development language. An array of options allow for full customization for advanced users, but basic implementation is so easy that even coding novices can do it. I wanted to ask if It is possible to sends out a link of a file that has just been uploaded wioth the e-mail notification of Uploadify. Here is the code for uploadify.php : <?php if (!empty($_FILES)) { $tempFile = $_FILES['Filedata']['tmp_name']; $targetPath = $_SERVER['DOCUMENT_ROOT'] . $_REQUEST['folder'] . '/'; $targetFile = str_replace('//','/',$targetPath) . $_FILES['Filedata']['name']; // $fileTypes = str_replace('*.','',$_REQUEST['fileext']); // $fileTypes = str_replace(';','|',$fileTypes); // $typesArray = split('\|',$fileTypes); // $fileParts = pathinfo($_FILES['Filedata']['name']); // if (in_array($fileParts['extension'],$typesArray)) { // Uncomment the following line if you want to make the directory if it doesn't exist // mkdir(str_replace('//','/',$targetPath), 0755, true); move_uploaded_file($tempFile,$targetFile); echo "1"; // } else { // echo 'Invalid file type.'; // } } //define the receiver of the email $to = '[email protected]'; //define the subject of the email $subject = 'Test email'; //define the message to be sent. Each line should be separated with \n $message = "Hello World!\n\nThis is my first mail."; //define the headers we want passed. Note that they are separated with \r\n $headers = "From: [email protected]\r\nReply-To: [email protected]"; //send the email $mail_sent = @mail( $to, $subject, $message, $headers ); //if the message is sent successfully print "Mail sent". Otherwise print "Mail failed" echo $mail_sent ? "Mail sent" : "Mail failed"; ?>

  Read the article

• Unable to set variables in bash script in Mac OSX

  - by cohortq

  Hello! I am attempting to automate moving files from a folder to a new folder automatically every night using a bash script run from applescript on a schedule. I am attempting to write a bash script on Mac OSX, and it keeps failing. In short this is what I have (all my ECHOs are for error checking): !/bin/bash folder = "ABC" useracct = 'test' day = date "+%d" month = date "+%B" year = date "+%Y" folderToBeMoved = "/users/$useracct/Documents/Archive/Primetime.eyetv" newfoldername = "/Volumes/Media/Network/$folder/$month$day$year" ECHO "Network is $network" $network ECHO "day is $day" ECHO "Month is $month" ECHO "YEAR is $year" ECHO "source is $folderToBeMoved" ECHO "dest is $newfoldername" mkdir $newfoldername cp -R $folderToBeMoved $newfoldername if [-f $newfoldername/Primetime.eyetv]; then rm $folderToBeMoved; fi Now my first problem is that I cannot set variables at all. Even literal ones where I just make it equal some literal. All my echos come out blank. I cannot grab the day, month, or year either,it comes out blank as well. I get an error saying that -f is not found. I get an error saying there is an unexpected end of file. I made the file and did a chmod u+x scriptname.sh I'm not sure why nothing is working at all. I am very new to this bash script on OSX, and only have experience with windows vbscript. Any help would be great, thanks!

  Read the article

• "jpeglib.h: No such file or directory" ghostscript port in OPENBSD

  - by holms

  Hello I have a problem with compiling a ghostscript from ports in openbsd 4.7. SO i have jpeg-7 installed, I have latest port tree for obsd4.7. ===> Building for ghostscript-8.63p11 mkdir -p /usr/ports/pobj/ghostscript-8.63p11/ghostscript-8.63/obj gmake LDFLAGS='-L/usr/local/lib -shared' GS_XE=./obj/../obj/libgs.so.11.0 STDIO_IMPLEMENTATION=c DISPLAY_DEV=./obj/../obj/display.dev BINDIR=./obj/../obj GLGENDIR=./obj/../obj GLOBJDIR=./obj/../obj PSGENDIR=./obj/../obj PSOBJDIR=./obj/../obj CFLAGS='-O2 -fno-reorder-blocks -fno-reorder-functions -fomit-frame-pointer -march=i386 -fPIC -Wall -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -fno-builtin -fno-common -DGS_DEVS_SHARED -DGS_DEVS_SHARED_DIR=\"/usr/local/lib/ghostscript/8.63\"' prefix=/usr/local ./obj/../obj/gsc gmake[1]: Entering directory `/usr/ports/pobj/ghostscript-8.63p11/ghostscript-8.63' cc -I./obj/../obj -I./src -DHAVE_MKSTEMP -O2 -fno-reorder-blocks -fno-reorder-functions -fomit-frame-pointer -march=i386 -fPIC -Wall -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -fno-builtin -fno-common -DGS_DEVS_SHARED -DGS_DEVS_SHARED_DIR=\"/usr/local/lib/ghostscript/8.63\" -DGX_COLOR_INDEX_TYPE='unsigned long long' -o ./obj/../obj/sdctc.o -c ./src/sdctc.c In file included from src/sdctc.c:17: obj/jpeglib_.h:1:21: jpeglib.h: No such file or directory In file included from src/sdctc.c:19: src/sdct.h:58: error: field `err' has incomplete type src/sdct.h:70: error: field `err' has incomplete type src/sdct.h:72: error: field `cinfo' has incomplete type src/sdct.h:73: error: field `destination' has incomplete type src/sdct.h:84: error: field `err' has incomplete type src/sdct.h:87: error: field `dinfo' has incomplete type src/sdct.h:88: error: field `source' has incomplete type gmake[1]: *** [obj/../obj/sdctc.o] Error 1 gmake[1]: Leaving directory `/usr/ports/pobj/ghostscript-8.63p11/ghostscript-8.63' gmake: *** [so] Error 2 *** Error code 2 Stop in /usr/ports/print/ghostscript/gnu (line 2225 of /usr/ports/infrastructure/mk/bsd.port.mk). I tried to place one more param in CFLAGS in Makefile with value "-I/usr/local" but no luck =( People in irc [freenode server, #openbsd channel] refuses give any help for ports at all, and even more - because this is 4.7 unstable version. I have my reasons to use this version and ports believe me =) CFLAGS+= -DSYS_TYPES_HAS_STDINT_TYPES \ -I${LOCALBASE}/include \ -I${LOCALBASE}/include/ijs \ -I${LOCALBASE}/include/libpng \

  Read the article

• hg archive to Remote Directory

  - by Brett Daniel

  Is there any way to archive a Mercurial repository to a remote directory over SSH? For example, it would be nice if one could do the following: hg archive ssh://[email protected]/path/to/archive However, that does not appear to work. It instead creates a directory called ssh: in the current directory. I made the following quick-and-dirty script that emulates the desired behavior by creating a temporary ZIP archive, copying it over SSH, and unzipping the destination directory. However, I would like to know if there is a better way. if [[ $# != 1 ]]; then echo "Usage: $0 [user@]hostname:remote_dir" exit fi arg=$1 arg=${arg%/} # remove trailing slash host=${arg%%:*} remote_dir=${arg##*:} # zip named to match lowest directory in $remote_dir zip=${remote_dir##*/}.zip # root of archive will match zip name hg archive -t zip $zip # make $remote_dir if it doesn't exist ssh $host mkdir --parents $remote_dir # copy zip over ssh into destination scp $zip $host:$remote_dir # unzip into containing directory (will prompt for overwrite) ssh $host unzip $remote_dir/$zip -d $remote_dir/.. # clean up zips ssh $host rm $remote_dir/$zip rm $zip Edit: clone-and-push would be ideal, but unfortunately the remote server does not have Mercurial installed.

  Read the article

• NAnt not running NUnit tests

  - by ctford

  I'm using NUnit 2.5 and NAnt 0.85 to compile a .NET 3.5 library. Because NAnt 0.85 doesn't support .NET 3.5 out of the box, I've added an entry for the 3.5 framework to NAnt.exe.config. 'MyLibrary' builds, but when I hit the "test" target to execute the NUnit tests, none of them seem to run. [nunit2] Tests run: 0, Failures: 0, Not run: 0, Time: 0.012 seconds Here are the entries in my NAnt.build file for the building and running the tests: <target name="build_tests" depends="build_core"> <mkdir dir="Target" /> <csc target="library" output="Target\Test.dll" debug="true"> <references> <include name="Target\MyLibrary.dll"/> <include name="Libraries\nunit.framework.dll"/> </references> <sources> <include name="Test\**\*.cs" /> </sources> </csc> </target> <target name="test" depends="build_tests"> <nunit2> <formatter type="Plain" /> <test assemblyname="Target\Test.dll" /> </nunit2> </target> Is there some versioning issue I need to be aware of? Test.dll runs fine in the NUnit GUI. The testing dll is definitely being found, because if I move it I get the following error: Failure executing test(s). If you assembly is not build using NUnit 2.2.8.0... Could not load file or assembly 'Test' or one of its dependencies... I would be grateful if anyone could point me in the right direction or describe a similary situation they have encountered. Edit I have since tried it with NAnt 0.86 beta 1, and the same problem occurs.

  Read the article

• Removing padding from structure in kernel module

  - by dexkid

  I am compiling a kernel module, containing a structure of size 34, using the standard command. make -C /lib/modules/$(KVERSION)/build M=$(PWD) modules The sizeof(some_structure) is coming as 36 instead of 34 i.e. the compiler is padding the structure. How do I remove this padding? Running make V=1 shows the gcc compiler options passed as make -I../inc -C /lib/modules/2.6.29.4-167.fc11.i686.PAE/build M=/home/vishal/20100426_eth_vishal/organised_eth/src modules make[1]: Entering directory `/usr/src/kernels/2.6.29.4-167.fc11.i686.PAE' test -e include/linux/autoconf.h -a -e include/config/auto.conf || ( \ echo; \ echo " ERROR: Kernel configuration is invalid."; \ echo " include/linux/autoconf.h or include/config/auto.conf are missing."; \ echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo; \ /bin/false) mkdir -p /home/vishal/20100426_eth_vishal/organised_eth/src/.tmp_versions ; rm -f /home/vishal/20100426_eth_vishal/organised_eth/src/.tmp_versions/* make -f scripts/Makefile.build obj=/home/vishal/20100426_eth_vishal/organised_eth/src gcc -Wp,-MD,/home/vishal/20100426_eth_vishal/organised_eth/src/.eth_main.o.d -nostdinc -isystem /usr/lib/gcc/i586-redhat-linux/4.4.0/include -Iinclude -I/usr/src/kernels/2.6.29.4-167.fc11.i686.PAE/arch/x86/include -include include/linux/autoconf.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Os -m32 -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -march=i686 -mtune=generic -Wa,-mtune=generic32 -ffreestanding -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Iarch/x86/include/asm/mach-generic -Iarch/x86/include/asm/mach-default -Wframe-larger-than=1024 -fno-stack-protector -fno-omit-frame-pointer -fno-optimize-sibling-calls -g -pg -Wdeclaration-after-statement -Wno-pointer-sign -fwrapv -fno-dwarf2-cfi-asm -DTX_DESCRIPTOR_IN_SYSTEM_MEMORY -DRX_DESCRIPTOR_IN_SYSTEM_MEMORY -DTX_BUFFER_IN_SYSTEM_MEMORY -DRX_BUFFER_IN_SYSTEM_MEMORY -DALTERNATE_DESCRIPTORS -DEXT_8_BYTE_DESCRIPTOR -O0 -Wall -DT_ETH_1588_051 -DALTERNATE_DESCRIPTORS -DEXT_8_BYTE_DESCRIPTOR -DNETHERNET_INTERRUPTS -DETH_IEEE1588_TESTS -DSNAPTYPSEL_TMSTRENA_TEVENTENA_TESTS -DT_ETH_1588_140_147 -DLOW_DEBUG_PRINTS -DMEDIUM_DEBUG_PRINTS -DHIGH_DEBUG_PRINTS -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(eth_main)" -D"KBUILD_MODNAME=KBUILD_STR(conxt_eth)" -c -o /home/vishal/20100426_eth_vishal/organised_eth/src/eth_main.o /home/vishal/20100426_eth_vishal/organised_eth/src/eth_main.c

  Read the article

• classpath error when executing a jar by ant

  - by changed

  Hi I am trying to execute a jar file created using ant. But i am not able to find out why libraries are not available while executing jar. I am trying to load derby embedded database driver but some how i am not getting derby.jar in classpath. Error that i am getting is [java] Unable to load the JDBC driver org.apache.derby.jdbc.EmbeddedDriver [java] Please check your CLASSPATH. [java] java.lang.ClassNotFoundExcepApplication Started [java] tion: org.apache.derby.jdbc.EmbeddedDriver [java] at java.net.URLClassLoader$1.run(URLClassLoader.java:200) a <path id="jar.classpath"> <fileset dir="${lib.dir}" includes="*.jar" /> </path> <path id="compiled-src.jar.classpath"> <path refid="jar.classpath" /> <pathelement location="${build.classes.dir}" /> </path> <target name="jar" depends="compile-src" description="Create Jar"> <mkdir dir="${dist.dir}" /> <manifestclasspath property="lib.list" jarfile="${dist.dir}/"> <classpath refid="jar.classpath" /> </manifestclasspath> <jar destfile="${dist.dir}/${ant.project.name}.jar" basedir="${build.classes.dir}" > <manifest> <attribute name="Main-Class" value="${main-class}" /> <attribute name="Class-Path" value="${lib.list}" /> </manifest> </jar> </target> <target name="run" depends="jar" description="Run application from jar"> <java jar="${dist.dir}/${ant.project.name}.jar" fork="true" /> </target>

  Read the article

• Checkstyle: cannot summarise issues per author ?

  - by David Michel

  Hi all, I'm trying to use checkstyle for a java project but I can't seem to get it working properly: While it apparently runs smoothly, the html report doesn't give any info per authors as it should, i.e. the authors table is empty. The thing is I don't know how checkstyle identify an author. Does it look at the java doc tag @author ? at the class level or at the method level ? The ant task I used is below: <taskdef resource="checkstyletask.properties" classpath="${libs.dir}/checkstyle-all-5.0.jar"/> <target name="checkstyle" description="Generates a report of code convention violations."> <mkdir dir="${checkstyle.dir}"/> <checkstyle config="${util.dir}/checkstyle/sun_checks.xml" failureProperty="checkstyle.failure" failOnViolation="false"> <formatter type="xml" tofile="${checkstyle.dir}/checkstyle_report.xml"/> <fileset dir="${src.dir}" includes="**/*.java"/> </checkstyle> <xslt in="${checkstyle.dir}/checkstyle_report.xml" out="${checkstyle.dir}/checkstyle_report.html" style="${util.dir}/checkstyle/checkstyle-author.xsl"/> </target> Many thanks for your help David

  Read the article

• No test coverage files generated for Unit Test bundle in Xcode

  - by John Gallagher

  The Problem I've got a Cocoa project on the desktop and I'm using Xcode 3.2.1 on Snow Leopard 10.6.2. I want to generate code coverage files for my Unit Test Target in Xcode. What I've Tried As articles like this one suggest, I've adjusted the build settings to: “Generate Test Coverage Files” checked “Instrument Program Flow” checked “-lgcov” added to “Other Linker Flags” I've also set the Run Script section of the test target to have the following: # Run the unit tests in this test bundle. "${SYSTEM_DEVELOPER_DIR}/Tools/RunUnitTests" # Run gcov on the framework getting tested if [ "${CONFIGURATION}" = 'Coverage' ]; then FRAMEWORK_NAME=LapsusInterpretationEngine FRAMEWORK_OBJ_DIR=${OBJROOT}/${FRAMEWORK_NAME}.build/${CONFIGURATION}/EngineTests.build/Objects-normal/${NATIVE_ARCH} mkdir -p coverage pushd coverage find ${OBJROOT} -name *.gcda -exec gcov -o ${FRAMEWORK_OBJ_DIR} {} \; popd fi Since my Framework name is LapsusInterpretationEngine but my target is named EngineTests, I put this directly into the FRAMEWORK_OBJ_DIR but this didn't seem to help. I've tried cleaning before building. I've made sure all the above build settings apply to both the Unit Test Target and the Application Target. What I Get No .gcda or .gcno files anywhere in the build directory I'm using. I point CoverStory to the Objects-normal directory in my builds folder and it complains that there's nothing there for it to read. I must be doing something really obvious wrong. Anyone any ideas? I have tried the "EngineTests.build" directory being ${FRAMEWORK_NAME} and this gives the same results.

  Read the article

• Exclude string from wildcard in bash

  - by Peter O'Doherty

  Hi, I'm trying to adapt a bash script from "Sams' Teach Yourself Linux in 24 Hours" which is a safe delete command called rmv. The files are removed by calling rmv -d file1 file2 etc. In the original script a max of 4 files can by removed using the variables $1 $2 $3 $4. I want to extend this to an unlimited number of files by using a wildcard. So I do: for i in $* do mv $i $HOME/.trash done The files are deleted okay but the option -d of the command rmv -d is also treated as an argument and bash objects that it cannot be found. Is there a better way to do this? Thanks, Peter #!/bin/bash # rmv - a safe delete program # uses a trash directory under your home directory mkdir $HOME/.trash 2>/dev/null # four internal script variables are defined cmdlnopts=false delete=false empty=false list=false # uses getopts command to look at command line for any options while getopts "dehl" cmdlnopts; do case "$cmdlnopts" in d ) /bin/echo "deleting: \c" $2 $3 $4 $5 ; delete=true ;; e ) /bin/echo "emptying the trash..." ; empty=true ;; h ) /bin/echo "safe file delete v1.0" /bin/echo "rmv -d[elete] -e[mpty] -h[elp] -l[ist] file1-4" ;; l ) /bin/echo "your .trash directory contains:" ; list=true ;; esac done if [ $delete = true ] then for i in $* do mv $i $HOME/.trash done /bin/echo "rmv finished." fi if [ $empty = true ] then /bin/echo "empty the trash? \c" read answer case "$answer" in y) rm -i $HOME/.trash/* ;; n) /bin/echo "trashcan delete aborted." ;; esac fi if [ $list = true ] then ls -l $HOME/.trash fi

  Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23  | Next Page >