Search Results

Search found 16499 results on 660 pages for 'off rhoden'.

Page 17/660 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

• Old laptop turns off due to overheating

  - by Jake Thomas

  I have an old Laptop that powers off when the processor's temperature exceeds 84degs Celsius. The more annoying part is flash causes this the most of the times. If I watch a web feed for more than 15-20mins, it results into hard shutdown of the machine. I have an idea of a could-be solution to this problem, I want a program that would decrease the processor's clock speed to about 1.2GHz or whatever, leading it a lower temperature. Is there a program out there that does this? P.S. Someone please edit this and add the relevant tags, as I'm new and i have no idea of what tags to choose from.

  Read the article

• Auto log off windows machine after certain number of minutes

  - by Marty Heath

  I have three machines on my network, two are windows xp and one is windows 7. i would like to have all three machines log a user off if they are on for more than 60 minutes. And I would like this to be applied to the machine not on a per user basis, because I do not want this policy to apply to those users on any other machine. I have installed winexit.scr on one of the machines but the problem is that I cannot change the default value of 10 minutes for the screensaver because that is controlled through group policy, and I cannot seem to find where to change that through group policy on a per machine basis NOT on a per user basis. If I have left out any details I apologize please let me know anything that is needed

  Read the article

• PC boots on then off & 30 sec. later on again, it wiil shut off on itself mostly in idle or just unexpecticly

  - by Jody

  This problem started w/ my sons desktop, it would just shut off after a bit of work or stay on for a long time & to get it to unfreeze is to cold boot it, i put a new HDD in & I still have the same issue, RAM is good power supply fan is moving quite as well as all the rest of the fans it has stayed fairly dust free, i'm at a loss ,I have defaulted all the factory settings changed battery & ungraded to a new OS. I still have the same problem. the power light stays on after it has shut down & when upon starting it goes straight to safe mode option page, I start in last good config. reboots again takes 30 sec. to boot & will work again for a while, the only other thing I haven't tried was a graphic card replace, i'm onboard video now & have been.

  Read the article

• Serving static web files off a non-standard port

  - by Nimmy Lebby

  I'm close to deploying a Django project to production. I'm looking over some infrastructure decisions. Something that came up was serving static files with a different server such as lighttpd. However, we're starting off with a single dedicated server so our only option would be to use a non-standard port for the static file webserver. Is there precedence for this? I.e. Does anyone "big" do this? Any particular port I should use or shy away from using? Can anyone thing of some downsides of going this route?

  Read the article

• PC is randomly shutting off

  - by Bobby

  I have a PC which is randomly shutting off (the hard way, like someone pulled the plug). It's no heat problem, because this can happen after 2 minutes of operation or after 4 hours and I checked the temperature. It's also no problem of the operation system, because it will also do that while in BIOS. If it happens once, you can be sure that it will happen within the next hour another two or three times, and then it works again for over a week or even longer. Possible causes I've thought about so far are: Voltage Fluctuation Loose contact (already replugged all cables within the PC, no luck) Faulty PSU Maybe someone has more ideas to this? P.s.: I don't have the hardware specs with me right now, I'll post them as soon as I get them.

  Read the article

• Trigger ZFS dedup one-off scan/rededup

  - by Jake Wharton

  I have a ZFS filesystems which has been running for some time and I recently had the opportunity to upgrade it (finally!) to the latest ZFS version. Our data doesn't scream dedup but I firmly believe based on small tests that we could gain anywhere from 5-10% of our space back for free by utilizing it. I have enabled dedup on the filesystem and new files are slowly being dedupified but the majority (95%+) of our data already exists on the filesystem. Short of moving the data off-pool and then recopying it back, is there any way to trigger a dedup scan of existing data? It doesn't have to be asynchronous or live. (And FYI there isn't enough room on the pool to copy the entire filesystem to another and then just switch the mounts.)

  Read the article

• client denied by server configuration , Options ExecCGI is off in this directory

  - by John Smiith

  Error log [Wed Jul 04 06:01:54 2012] [error] [client 127.0.0.1] File does not exist: C:/xampp/www/htdocs/localhost/favicon.ico [Wed Jul 04 06:01:54 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/xampp/Bin/apache [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] Options ExecCGI is off in this directory: C:/xampp/www/htdocs/wsgi_app/wsgi_handler.py [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/xampp/Bin/apache [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] File does not exist: C:/xampp/www/htdocs/localhost/favicon.ico [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/xampp/Bin/apache Virtual host <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "C:/xampp/www/htdocs/localhost" ServerName localhost ServerAlias www.localhost ErrorLog "logs/localhost-error.log" CustomLog "logs/localhost-access.log" combined </VirtualHost> mod_wsgi httpdconf WSGIScriptAlias /wsgi "C:/xampp/www/htdocs/wsgi_app/wsgi_handler.py" <Directory "C:/xampp/www/htdocs/wsgi_app/"> AllowOverride None Options None Order deny,allow Allow from all </Directory> http://localhost/wsgi giving 403 error

  Read the article

• Movie colors are off on ubuntu

  - by chris

  I've been playing with a new SLR that also happens to record movies. When I try to view a movie using Movie Player, it plays fine, and the sound is there, but the colors are off - green grass is purple, and my golden retriever is a blue retriever. VLC reports that the file is broken, offers to repair it, and plays it with the same problem. The same file plays fine under WinXP with both Media Player and Quicktime, and with no problems under MacOS also with Quicktime. What's the problem, and how can I fix it?

  Read the article

• Running a VM off of an external HD via USB

  - by Nelson LaQuet

  Is it viable to run (i.e. reference the vmx/vhd directly from the mounted drive) a VM (vmware running Windows Seven) off of an external HD via USB? I mean, I know it's possible, but I guess I'm asking if USB provides enough bandwidth for normal usage... If so, are there any particular brands that may be better or worse? I know that ESATA would be a more viable setup, but my laptop doesn't have an ESATA port. Currently I use the VM to segregate all of my work development servers and software from my main machine; so I will be running all development servers and tools on the VM directly.

  Read the article

• How do I turn off caching in IIS7?

  - by jammus

  Hello. I'm developing an ASP classic site under Windows 7 (form a queue ladies). The problem is IIS seems to be heavily making use of its cache for both static and dynamic content which really conflicts with my 'make a small change, alt-tab, hit ctrl-F5' development style. Changes made to .asp files may take two or three refreshes to show up where as changes to .js files can take 20 times as many. How do I go about turning the caching off on my development machine? Cheers. in b4 stop using asp classic

  Read the article

• iis windos authentication way to turn off password prompt

  - by Ellery Newcomer

  IIS noobie here. I have an intranet website hosted by IIS (6? I'll check after the weekend) that is set to Windows Authentication. Whenever there is some sort of authentication failure, the website gives the user a windows account sort of password prompt and doesn't display a 403 (or 401 or whatever) page unless the user cancels the prompt. However, entering a password is never, ever a use case for this website. Is there a way to turn off the password prompt and just display the error page? Bonus: are there any good hooks for this precise point for code that would do diagnosis and logging?

  Read the article

• MAMP - Unable to turn off PHP E_STRICT error reporting

  - by Mark37

  For some reason, MAMP won't allow me to turn off E_STRICT warnings. I've tried everything from changing the value explicitly in php.ini to error_reporting(E_ALL & ~E_STRICT) in my file... to explicitly saying php_ini('error_reporting', E_ALL & ~E_STRICT). I'm entirely confused as to why this is happening, and from what I can tell its specific to MAMP. The version of PHP I'm running is 5.2.13 - and before you start telling me I shouldn't be ignoring those warnings, lets just be clear that I am using a framework that requires that E_STRICT be ignored. (lame, I know.)

  Read the article

• switch OFF syn cookies

  - by Nick

  We have several servers they have public IP's, but work together (one is with Load Balancer, orther with Apache Web server, other with MySQL and so on. Most of the ports are fire-walled, so only "local" servers can be connect there. However ALL servers have some ports that must be publicly open. We have SYN Cookies enabled and from time to time we got: possible SYN flooding on port 8080. Sending cookies. Port 8080 is not public. How we can switch OFF SYN Cookies for some ports (e.g. 8080, 3306 etc) or from some sources (e.g. our servers), but in same time SYN Cookies to be switched ON for all other ports, e.g. port 80. We found this similar problem, except our servers are with public IP's: SYN cookies on internal machines

  Read the article

• Booting Windows off new SSD from grub boots old Windows instead

  - by wuputah

  After a new SSD install, I have: Original Windows 7 on sdc1 (to be retired) Copy of Windows 7 on sdb2 A Windows system partition on sdb1 Ubuntu 12.04 on sda, /boot and ergo grub is on sda1 Grub is MBR on sda and set to boot from BIOS. I prefer to not change this; grub is great! I've run update-grub (the Ubuntu grub scripts are, at present, unaltered) and grub seems to be correctly configured as all options are available: I can boot any of the 3 Windows partitions and Ubuntu. I also ran the repair tool to get Windows to add both installations to BCD. The problem: choosing particular options seem to have no effect; the old version of Windows on sdc1 always boots. I'm stumped! My thought was to only boot Windows off sdb1, and then let BCD do the rest (present a menu to boot between sdb2 and sdc1, but I can't seem to get BCD to boot sdb2), but this has been unsuccessful. Reference: BCDEdit output

  Read the article

• Get off greylisting (the reason why our emails bounced back)

  - by user34402

  Hello, I'm system administrator in online store. We send several emails to our clients after purchase: confirmation, invoice and sale notification to our staff. Recently we got most of emails bounced back and some bounces describes a reason as greylisting, others - just general failure. It is ruining our business because clients are calling that they didn't get the emails with confirmation and invoices. How to get off greylisting, and to not be greylisted? What actions should we do? Mailserver is dedicated machine using Mailenable on Win 2003. Thanks.

  Read the article

• Windows 7 security and Avast antivirus turned off by themself

  - by Simon Verbeke

  I was just browsing around when at once I got messages that UAC, windows defender, Avast, etc. got turned off, without me doing anything. Then my PC turned by itself. I'm now running virus scans and I checked my eventlogs, but found nothing yet. Windows Update also failed to install a new definition after I rebooted. Any idea what this could've been? EDIT: Forgot to mention that everything was turned on again after rebooting. I have since the reboot got nothing abnormal.

  Read the article

• MAMP - Unable to turn off PHP E_STRICT error reporting

  - by Mark37

  For some reason, MAMP won't allow me to turn off E_STRICT warnings. I've tried everything from changing the value explicitly in php.ini to error_reporting(E_ALL & ~E_STRICT) in my file... to explicitly saying php_ini('error_reporting', E_ALL & ~E_STRICT). I'm entirely confused as to why this is happening, and from what I can tell its specific to MAMP. The version of MAMP I'm running is 5.2.13 - and before you start telling me I shouldn't be ignoring those warnings, lets just be clear that I am using a framework that requires that E_STRICT be ignored. (lame, I know.)

  Read the article

• Bluetooth headset turns off when Skype call ends

  - by Claude

  For about 6 months, I haven't been able to use Skype because when I end a Skype call, my Plantronics Callisto headset gets turned off. I'm paralyzed so I can't turn it on manually. I have a Sony VAIO computer running Windows 7. I have updated my Bluetooth dongle software, uninstalled and reinstalled Skype and uninstalled Skype and gone back to an earlier version; all to no avail. Neither Plantronics nor Skype technical support are interested in looking into this problem for me.

  Read the article

• Procedure for dual booting (2 copies of Win-7) off 2 partitions on same disk

  - by Sam Holder

  What procedure should I follow to set a dual boot (both Win-7 x64) on a machine where (ideally): Both operating systems will be installed on the same physical disk in different partitions When booting into either operating system the contents of the other OS partition disk will not be seen (this just seems safer) Other hard drives in the system will be visible by both OS's 1 copy of Win7 is already installed. Is it as simple as shrinking the existing volume and creating the partition, then sticking the CD in and booting off it and formatting the new partition and then installing another copy of windows onto the new partition? Or will that not work? Or are there gotchas?

  Read the article

• Copy files off FreeBSD

  - by Josh

  I have a FreeBSD machine that I have to copy everything off the drive. The fielsystem is UFS and not readable by any other operating system. (great...) I have a USB flash drive (FAT32) I need to copy everything to from the SATA in the bsd machine. I looked up cp commands, and got it to partially work, but it seems to copy to the wrong directory. I cannot find out the "name" of the USB drive, and if it can even copy to it.

  Read the article

• Dual Monitors don't turn off/sleep when they should

  - by Mario

  Details: Dual 25" monitors connected to HP Envy via HDMI and display port via DVI adapter. Power scheme is set up in high performance (Dim Display: Never - Turn Off Display: 15 mins - Computer Sleep: Never) Screensaver is set up to kick in after 10 mins of idle (which happens) 5 minutes later, the screensaver stops. The "Monitor Going to Sleep" notice appears on screen and monitors go to sleep briefly. All is well thus far. Suddenly, the Windows 7 alert sound when a device is unplugged is heard. Monitors then turn back on. Screens are black. Only the mouse cursor is displayed. Backlighting is back on. This only started happening after I obtained and connected the second 25" monitor a few days ago. However, I had a 24" in its place before, and this wasn't happening. Why is this happening and how do I correct this behavior? Thanks in advance.

  Read the article

• Programming powering off and powering on in one single OnClick function on android

  - by user1060919

  I would like to write an activity that after clicking on a button turns off the screen and then turns it back on after 2 secs. I tried using the following code in order to power off the screen: WindowManager.LayoutParams lp = getWindow().getAttributes(); lp.screenBrightness = 0/(float)255; getWindow().setAttributes(lp); But it would only take effect when then onClick function returns. I tried running it into a handler but with no success. I need to find a way to force the setting to get applied before the function returns so that I can call the power on function 2 secs later on the same onClick call. I also found it very hard to wakeup the device afterwards. While this code works if I power off the screen using the physical button it doesn't seem to work when the phone is powered off using the technique described previously. PowerManager pm = (PowerManager)this.getSystemService(Context.POWER_SERVICE); PowerManager.WakeLock wl = pm.newWakeLock(PowerManager.FULL_WAKE_LOCK|PowerManager.ACQUIRE_CAUSES_WAKEUP | PowerManager.ON_AFTER_RELEASE ,"Dev Tag"); try { wl.acquire(); wl.release(); } catch (Exception e) { Toast.makeText(this, e.getMessage(),20).show(); } Thanks you in advance for your help!

  Read the article

• Log off as local "administrator" user, get blank login screen

  - by Force Flow

  I have an imaged lab environment running Windows 7 and attached to a domain. The local Administrator account is enabled for certain maintenance and prep tasks. Every time I logoff from the local Administrator account, it brings me back to the standard Ctrl+Alt+Del login screen. When I press that combination, all the user controls vanish except for the accessibility button down in the left hand corner. The only way I can seem to escape from this is to tap the power button to initiate a shutdown. Windows is up-to-date, and logging off as any other user operates normally. The "hide last user" local security policy option is enabled. Has anyone seen this phenomenon before and how can I stop this from happening?

  Read the article

• repairing or retrieving video off a cracked disk

  - by Tori Hisey

  My disk has a thin cracked right through the one side. right around the crack it looks like it has water damage but im pretty sure it was caused from the crack. will tape work for this? its a dvd of us in jamaica swimming with dolphins and i havent even watched it yet, it got ruined in my suitcase. If there is no way to repair it, is there somewhere that i can take it so they might be able to somehow get the video off of it and onto another disk? any suggestions would be helpful. Thanks

  Read the article

• Server is on or off

  - by Daniel

  Curious. I'm starting to broadcast high school football games online, and it uses a program to broadcast the feeds off my computer. However, when I shut the program down or the computer down, the server goes offline and guests won't be able to access the feeds. Is there any kind of code out there that I can post onto my website that will indicate to my guests whether the server is on or off? I would figure it would be a simple code, a php script or something that periodically checks to see if a site is on line and then displays ON or OFF.

  Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >