Search Results

Search found 1864 results on 75 pages for 'optional'.

Page 17/75 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Displaylink USB show "Logo / Loading" on monitor

    - by Ken Le
    I tried with this problem for 2 years already. LOL, today, I install Ubuntu for I have to resolve it or I will back to stupid Windows 7. First, I have 3 monitors. My graphic card is support dual ( ATI Radeon ), so I have no problem on extend those multi monitor on VGA and DVI. The 3rd monitor is Displaylink USB. After installed everything required, when I reboot, the displaylink monitor show "Ubuntu ...." like logo / loading screen. I go to System Display , Detect monitor, it only show my 1st and 2nd, NO 3RD Displaylink. I can move my mouse between those 1st & 2nd, but the 3rd is only show the Ubuntu Screen. I press Ctrl+Alt+1, then screen switch to Displaylink USB 3RD monitor, but its "Terminal" not a desktop. Then I press Ctrl+Alt+7 , the screen switch back to my 1st, 2nd, and the displaylink 3rd is witch back to Logo / Ubuntu again. This is my /etc/X11/xorg.conf : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen 1 "DisplayLinkScreen" Leftof "aticonfig-Screen[0]-0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DisplayLinkMonitor" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "1680 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP1" "0-DFP1" Option "Monitor-CRT2" "0-CRT2" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "DisplayLinkDevice" Driver "displaylink" Option "fbdev" "/dev/fb1" Option "ShadowFB" "off" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3600 1920 Depth 24 EndSubSection EndSection Section "Screen" Identifier "DisplayLinkScreen" Device "DisplayLinkDevice" Monitor "DisplayLinkMonitor" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection EndSection

    Read the article

  • SSH from external network refused

    - by wulfsdad
    I've installed open-ssh-server on my home computer(running Lubuntu 12.04.1) in order to connect to it from school. This is how I've set up the sshd_config file: # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for #Port 22 Port 2222 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH #LogLevel INFO LogLevel VERBOSE # Authentication: LoginGraceTime 120 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding no X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net Banner /etc/sshbanner.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes #specify which accounts can use SSH AllowUsers onlyme I've also configured my router's port forwarding table to include: LAN Ports: 2222-2222 Protocol: TCP LAN IP Address: "IP Address" displayed by viewing "connection information" from right-click menu of system tray Remote Ports[optional]: n/a Remote IP Address[optional]: n/a I've tried various other configurations as well, using primary and secondary dns, and also with specifying remote ports 2222-2222. I've also tried with TCP/UDP (actually two rules because my router requires separate rules for each protocol). With any router port forwarding configuration, I am able to log in with ssh -p 2222 -v localhost But, when I try to log in from school using ssh -p 2222 onlyme@IP_ADDRESS I get a "No route to host" message. Same thing when I use the "Broadcast Address" or "Default Route/Primary DNS". When I use the "subnet mask", ssh just hangs. However, when I use the "secondary DNS" I recieve a "Connection refused" message. :^( Someone please help me figure out how to make this work.

    Read the article

  • C# 4.0 New Features

    New features on c# 4.0 1. Dynamic Typed Objects 2. Optional and Named Parameters 3. Improved COM Interoperability 4. Co- and Contra-Variance

    Read the article

  • New Interaction Hub Statement of Direction Published

    - by Matthew Haavisto
    The latest PeopleSoft Interaction Hub Statement of Direction is now available on My Oracle Support.  We think this subject will be particularly interesting to customers given the impending release of the PeopleSoft Fluid User Experience and all that offers.  The Statement of Direction describes how we see the Interaction Hub being used with the new user experience and the Hub's continued place in a PeopleSoft environment.  This paper also discusses subjects like branding, content management, easier design/deployment, and the optional restricted use license.

    Read the article

  • How to calculate continuous motion with angular velocity in 2d

    - by Rulk
    I'm really new with physics. Maybe someone would be able to help me to solve the next problem: I need to calculate position of an agent on the plane(2D) in next time step where time step is large(20+ seconds) What I know about agent's motion: Initial Position Direction(normalised vector) Velocity(linear function from time ) - object always moves along it's direction Angular Velocity(linear function from time) Optional: External force direction External force (linear function from time) Running discreet simulation with t-0 is not an option.

    Read the article

  • Announcement: ZFS Backup Appliance

    - by uwes
    Announcing Product Software Changes for Sun ZFS Backup Appliance Effective December 4th, 2012, Replication and Cloning software licenses are no longer mandatory purchases with Sun ZFS Backup Appliance.   Replication and Cloning are still available as optional additions on new Sun ZFS Backup Appliance quotes, or as additions to existing systems. For More Product Information Go To External: ZFS Storage Appliance Oracle.com page External: ZFS Storage Appliance Oracle Technical Network.com page External: Software download support.oracle.com page

    Read the article

  • Do you know a good web CMS to manage a sports team?

    - by benjamin'''''42
    I'm looking for a web based CMS that enables me to manage a sport team, I need the following features: Calendar** Schedule events (sync with the calendar, RSS feed), it would be great if I could schedule a weekly event too, so that I don't have to schedule it by hand each week** Announcements (same RSS feed as events)** A place where I can put some documentation, rules** Keep track of the matches and scores Photo and video gallery ** means feature is required; otherwise optional Any technology for the CMS is probably fine, though I would prefer an SQLite-based CMS.

    Read the article

  • How do I put YAML code in GitHub MarkDown?

    - by rutherford
    Following YAML snippet that I'm trying to place in my markdown formatted readme: ``` libraries: - name: numpy version: "1.6.1" ``` Tried the above with both no and 2 trailing spaces at the end of each line. Both turn out on a single line. Obviously I want them on 3 separate lines in my README.md. How? edit: note tried adding 'yaml' as the optional lang parameter but no dice either.

    Read the article

  • Will using HTTPS hurt my site's SEO or other statistics?

    - by yannbane
    I've set up a WordPress blog. Since I have to log into it from many different locations/machines, I've also got an SSL certificate, and set up Apache to redirect HTTP to HTTPS. It all works, but I'm wondering whether that's an overkill. Since most people who go to my site don't have to log in, I'm starting to wonder whether HTTPS has some drawbacks. If so, should I look for a way to make HTTPS optional?

    Read the article

  • yum not working on EC2 Red Hat instance: Cannot retrieve repository metadata

    - by adev3
    For some reason yum has stopped working in my Amazon EC2 instance, located in the EU West sector. There seems to be something wrong with the path of the repo metadata, is this correct? I would be very grateful for any help, as my experience in this field is somewhat limited. Thank you very much. cat /etc/redhat-release: Red Hat Enterprise Linux Server release 6.2 (Santiago) yum repolist: Loaded plugins: amazon-id, rhui-lb, security https://rhui2-cds01.eu-west-1.aws.ce.redhat.com/pulp/repos//rhui-client-config/rhel/server/6/x86_64/os/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 401" Trying other mirror. https://rhui2-cds02.eu-west-1.aws.ce.redhat.com/pulp/repos//rhui-client-config/rhel/server/6/x86_64/os/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 401" Trying other mirror. repo id repo name status rhui-eu-west-1-client-config-server-6 Red Hat Update Infrastructure 2.0 Client Configuration Server 6 0 rhui-eu-west-1-rhel-server-releases Red Hat Enterprise Linux Server 6 (RPMs) 0 rhui-eu-west-1-rhel-server-releases-optional Red Hat Enterprise Linux Server 6 Optional (RPMs) 0 repolist: 0 yum update: (I needed to remove the base URLs below because of ServerFault's restrictions for new users) Loaded plugins: amazon-id, rhui-lb, security [same as base url 1 above]/pulp/repos//rhui-client-config/rhel/server/6/x86_64/os/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 401" Trying other mirror. [same as base url 2 above]/pulp/repos//rhui-client-config/rhel/server/6/x86_64/os/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 401" Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: rhui-eu-west-1-client-config-server-6. Please verify its path and try again

    Read the article

  • Debugging UI Problems in IE8 (Was IE8 on Windows 7 Authentication Mess)

    - by alharaka
    UPDATE: I think the real question I need to ask here is: how does a technician debug UI problems with Internet Explorer, and not HTML rendering issues that have pretty good tools? I am aware of the SysInternals tools and others mentioned below, but maybe I am not harnessing their power properly. Someone else in the TechNet forum I mentioned had a similar issue. Again, I have lots of data, I am not sure how to properly interpret it. ORIGINAL POST: So I tried the venerable Technet Forums to solve this isse. In short, the Windows Security dialog has no place to put credentials, rendering pretty much useless. This happens to apply for a whole bunch of our intranet websites, and only a select number of users with a few laptops have this problem. It ends up looking like this. Things I have tried so far: Disabling local Group Policy (not domain connected) Disabling local Security Policy Resetting IE settings A few system restores Re-registering a bunch of IE DLL's and all other steps here Reinstalling IE8 (dism /online /disable-feature /featurename:"internet-explorer-optional-x86, reboot, dism /online /enable-feature /featurename:"internet-explorer-optional-x86, and reboot) And SFC scan, which found nothing Still, nothing. Not only am I fed up, but I have begun to really work with APIExplorer and Procmon as mentioned in the Technet original because I want to know WHAT is happening, not just fix it. Any thoughts?

    Read the article

  • Debugging UI Problems in IE8 (Was IE8 on Windows 7 Authentication Mess)

    - by alharaka
    UPDATE: I think the real question I need to ask here is: how does a technician debug UI problems with Internet Explorer, and not HTML rendering issues that have pretty good tools? I am aware of the SysInternals tools and others mentioned below, but maybe I am not harnessing their power properly. Someone else in the TechNet forum I mentioned had a similar issue. Again, I have lots of data, I am not sure how to properly interpret it. ORIGINAL POST: So I tried the venerable Technet Forums to solve this isse. In short, the Windows Security dialog has no place to put credentials, rendering pretty much useless. This happens to apply for a whole bunch of our intranet websites, and only a select number of users with a few laptops have this problem. It ends up looking like this. Things I have tried so far: Disabling local Group Policy (not domain connected) Disabling local Security Policy Resetting IE settings A few system restores Re-registering a bunch of IE DLL's and all other steps here Reinstalling IE8 (dism /online /disable-feature /featurename:"internet-explorer-optional-x86, reboot, dism /online /enable-feature /featurename:"internet-explorer-optional-x86, and reboot) And SFC scan, which found nothing Still, nothing. Not only am I fed up, but I have begun to really work with APIExplorer and Procmon as mentioned in the Technet original because I want to know WHAT is happening, not just fix it. Any thoughts?

    Read the article

  • Whitelist IP from google-authenticator in sshd pam

    - by spudwaffle
    My Ubuntu 12.04 server uses the google-authenticator pam module to provide two step authentication for ssh. I need to make it so that a certain IP does not need to type the verification code. The /etc/pam.d/sshd file is below: # PAM configuration for the Secure Shell service # Read environment variables from /etc/environment and # /etc/security/pam_env.conf. auth required pam_env.so # [1] # In Debian 4.0 (etch), locale-related environment variables were moved to # /etc/default/locale, so read that as well. auth required pam_env.so envfile=/etc/default/locale # Standard Un*x authentication. @include common-auth # Disallow non-root logins when /etc/nologin exists. account required pam_nologin.so # Uncomment and edit /etc/security/access.conf if you need to set complex # access limits that are hard to express in sshd_config. # account required pam_access.so # Standard Un*x authorization. @include common-account # Standard Un*x session setup and teardown. @include common-session # Print the message of the day upon successful login. session optional pam_motd.so # [1] # Print the status of the user's mailbox upon successful login. session optional pam_mail.so standard noenv # [1] # Set up user limits from /etc/security/limits.conf. session required pam_limits.so # Set up SELinux capabilities (need modified pam) # session required pam_selinux.so multiple # Standard Un*x password updating. @include common-password auth required pam_google_authenticator.so I've already tried adding a auth sufficient pam_exec.so /etc/pam.d/ip.sh line above the google-authenticator line, but I can't understand how to check an IP adress in the bash script.

    Read the article

  • org-sort multi: date/time (?d ?t) | priority (?p) | title (?a)

    - by lawlist
    Is anyone aware of an org-sort function / modification that can refile / organize a group of TODO so that it sorts them by three (3) criteria: first sort by due date, second sort by priority, and third sort by by title of the task? EDIT: I believe that org-sort by deadline (?d) has a bug that cannot properly handle undated tasks. I am working on a workaround (i.e., moving the undated todo to a different heading before the deadline (?d) sort occurs), but perhaps the best thing to do would be to try and fix the original sorting function. Development of the workaround can be found in this thread (i.e., moving the undated tasks to a different heading in one fell swoop): How to automate org-refile for multiple todo EDIT: Apparently, the following code (ancient history) that I found on the internet was eventually modified and included as a part of org-sort-entries. Unfortunately, undated todo are not properly sorted when sorting by deadline -- i.e., they are mixed in with the dated todo. ;; multiple sort (defun org-sort-multi (&rest sort-types) "Multiple sorts on a certain level of an outline tree, or plain list items. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Example: To sort first by TODO status, then by priority, then by date, then alphabetically (case-sensitive) use the following call: (org-sort-multi '(?d ?p ?t (t . ?a)))" (interactive) (dolist (x (nreverse sort-types)) (when (char-valid-p x) (setq x (cons nil x))) (condition-case nil (org-sort-entries (car x) (cdr x)) (error nil)))) ;; sort current level (defun lawlist-sort (&rest sort-types) "Sort the current org level. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Defaults to \"?o ?p\" which is sorted by TODO status, then by priority" (interactive) (when (equal mode-name "Org") (let ((sort-types (or sort-types (if (or (org-entry-get nil "TODO") (org-entry-get nil "PRIORITY")) '(?d ?t ?p) ;; date, time, priority '((nil . ?a)))))) (save-excursion (outline-up-heading 1) (let ((start (point)) end) (while (and (not (bobp)) (not (eobp)) (<= (point) start)) (condition-case nil (outline-forward-same-level 1) (error (outline-up-heading 1)))) (unless (> (point) start) (goto-char (point-max))) (setq end (point)) (goto-char start) (apply 'org-sort-multi sort-types) (goto-char end) (when (eobp) (forward-line -1)) (when (looking-at "^\\s-*$") ;; (delete-line) ) (goto-char start) ;; (dotimes (x ) (org-cycle)) ))))) EDIT: Here is a more modern version of multi-sort, which is likely based upon further development of the above-code: (defun org-sort-all () (interactive) (save-excursion (goto-char (point-min)) (while (re-search-forward "^\* " nil t) (goto-char (match-beginning 0)) (condition-case err (progn (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o) (forward-line)) (error nil))) (goto-char (point-min)) (while (re-search-forward "\* PROJECT " nil t) (goto-char (line-beginning-position)) (ignore-errors (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o)) (forward-line)))) EDIT: The best option will be to fix sorting of deadlines (?d) so that undated todo are moved to the bottom of the outline, instead of mixed in with the dated todo. Here is an excerpt from the current org.el included within Emacs Trunk (as of July 1, 2013): (defun org-sort (with-case) "Call `org-sort-entries', `org-table-sort-lines' or `org-sort-list'. Optional argument WITH-CASE means sort case-sensitively." (interactive "P") (cond ((org-at-table-p) (org-call-with-arg 'org-table-sort-lines with-case)) ((org-at-item-p) (org-call-with-arg 'org-sort-list with-case)) (t (org-call-with-arg 'org-sort-entries with-case)))) (defun org-sort-remove-invisible (s) (remove-text-properties 0 (length s) org-rm-props s) (while (string-match org-bracket-link-regexp s) (setq s (replace-match (if (match-end 2) (match-string 3 s) (match-string 1 s)) t t s))) s) (defvar org-priority-regexp) ; defined later in the file (defvar org-after-sorting-entries-or-items-hook nil "Hook that is run after a bunch of entries or items have been sorted. When children are sorted, the cursor is in the parent line when this hook gets called. When a region or a plain list is sorted, the cursor will be in the first entry of the sorted region/list.") (defun org-sort-entries (&optional with-case sorting-type getkey-func compare-func property) "Sort entries on a certain level of an outline tree. If there is an active region, the entries in the region are sorted. Else, if the cursor is before the first entry, sort the top-level items. Else, the children of the entry at point are sorted. Sorting can be alphabetically, numerically, by date/time as given by a time stamp, by a property or by priority. The command prompts for the sorting type unless it has been given to the function through the SORTING-TYPE argument, which needs to be a character, \(?n ?N ?a ?A ?t ?T ?s ?S ?d ?D ?p ?P ?o ?O ?r ?R ?f ?F). Here is the precise meaning of each character: n Numerically, by converting the beginning of the entry/item to a number. a Alphabetically, ignoring the TODO keyword and the priority, if any. o By order of TODO keywords. t By date/time, either the first active time stamp in the entry, or, if none exist, by the first inactive one. s By the scheduled date/time. d By deadline date/time. c By creation time, which is assumed to be the first inactive time stamp at the beginning of a line. p By priority according to the cookie. r By the value of a property. Capital letters will reverse the sort order. If the SORTING-TYPE is ?f or ?F, then GETKEY-FUNC specifies a function to be called with point at the beginning of the record. It must return either a string or a number that should serve as the sorting key for that record. Comparing entries ignores case by default. However, with an optional argument WITH-CASE, the sorting considers case as well." (interactive "P") (let ((case-func (if with-case 'identity 'downcase)) (cmstr ;; The clock marker is lost when using `sort-subr', let's ;; store the clocking string. (when (equal (marker-buffer org-clock-marker) (current-buffer)) (save-excursion (goto-char org-clock-marker) (looking-back "^.*") (match-string-no-properties 0)))) start beg end stars re re2 txt what tmp) ;; Find beginning and end of region to sort (cond ((org-region-active-p) ;; we will sort the region (setq end (region-end) what "region") (goto-char (region-beginning)) (if (not (org-at-heading-p)) (outline-next-heading)) (setq start (point))) ((or (org-at-heading-p) (condition-case nil (progn (org-back-to-heading) t) (error nil))) ;; we will sort the children of the current headline (org-back-to-heading) (setq start (point) end (progn (org-end-of-subtree t t) (or (bolp) (insert "\n")) (org-back-over-empty-lines) (point)) what "children") (goto-char start) (show-subtree) (outline-next-heading)) (t ;; we will sort the top-level entries in this file (goto-char (point-min)) (or (org-at-heading-p) (outline-next-heading)) (setq start (point)) (goto-char (point-max)) (beginning-of-line 1) (when (looking-at ".*?\\S-") ;; File ends in a non-white line (end-of-line 1) (insert "\n")) (setq end (point-max)) (setq what "top-level") (goto-char start) (show-all))) (setq beg (point)) (if (>= beg end) (error "Nothing to sort")) (looking-at "\\(\\*+\\)") (setq stars (match-string 1) re (concat "^" (regexp-quote stars) " +") re2 (concat "^" (regexp-quote (substring stars 0 -1)) "[ \t\n]") txt (buffer-substring beg end)) (if (not (equal (substring txt -1) "\n")) (setq txt (concat txt "\n"))) (if (and (not (equal stars "*")) (string-match re2 txt)) (error "Region to sort contains a level above the first entry")) (unless sorting-type (message "Sort %s: [a]lpha [n]umeric [p]riority p[r]operty todo[o]rder [f]unc [t]ime [s]cheduled [d]eadline [c]reated A/N/P/R/O/F/T/S/D/C means reversed:" what) (setq sorting-type (read-char-exclusive)) (and (= (downcase sorting-type) ?f) (setq getkey-func (org-icompleting-read "Sort using function: " obarray 'fboundp t nil nil)) (setq getkey-func (intern getkey-func))) (and (= (downcase sorting-type) ?r) (setq property (org-icompleting-read "Property: " (mapcar 'list (org-buffer-property-keys t)) nil t)))) (message "Sorting entries...") (save-restriction (narrow-to-region start end) (let ((dcst (downcase sorting-type)) (case-fold-search nil) (now (current-time))) (sort-subr (/= dcst sorting-type) ;; This function moves to the beginning character of the "record" to ;; be sorted. (lambda nil (if (re-search-forward re nil t) (goto-char (match-beginning 0)) (goto-char (point-max)))) ;; This function moves to the last character of the "record" being ;; sorted. (lambda nil (save-match-data (condition-case nil (outline-forward-same-level 1) (error (goto-char (point-max)))))) ;; This function returns the value that gets sorted against. (lambda nil (cond ((= dcst ?n) (if (looking-at org-complex-heading-regexp) (string-to-number (match-string 4)) nil)) ((= dcst ?a) (if (looking-at org-complex-heading-regexp) (funcall case-func (match-string 4)) nil)) ((= dcst ?t) (let ((end (save-excursion (outline-next-heading) (point)))) (if (or (re-search-forward org-ts-regexp end t) (re-search-forward org-ts-regexp-both end t)) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?c) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward (concat "^[ \t]*\\[" org-ts-regexp1 "\\]") end t) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?s) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-scheduled-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?d) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-deadline-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?p) (if (re-search-forward org-priority-regexp (point-at-eol) t) (string-to-char (match-string 2)) org-default-priority)) ((= dcst ?r) (or (org-entry-get nil property) "")) ((= dcst ?o) (if (looking-at org-complex-heading-regexp) (- 9999 (length (member (match-string 2) org-todo-keywords-1))))) ((= dcst ?f) (if getkey-func (progn (setq tmp (funcall getkey-func)) (if (stringp tmp) (setq tmp (funcall case-func tmp))) tmp) (error "Invalid key function `%s'" getkey-func))) (t (error "Invalid sorting type `%c'" sorting-type)))) nil (cond ((= dcst ?a) 'string<) ((= dcst ?f) compare-func) ((member dcst '(?p ?t ?s ?d ?c)) '<))))) (run-hooks 'org-after-sorting-entries-or-items-hook) ;; Reset the clock marker if needed (when cmstr (save-excursion (goto-char start) (search-forward cmstr nil t) (move-marker org-clock-marker (point)))) (message "Sorting entries...done"))) (defun org-do-sort (table what &optional with-case sorting-type) "Sort TABLE of WHAT according to SORTING-TYPE. The user will be prompted for the SORTING-TYPE if the call to this function does not specify it. WHAT is only for the prompt, to indicate what is being sorted. The sorting key will be extracted from the car of the elements of the table. If WITH-CASE is non-nil, the sorting will be case-sensitive." (unless sorting-type (message "Sort %s: [a]lphabetic, [n]umeric, [t]ime. A/N/T means reversed:" what) (setq sorting-type (read-char-exclusive))) (let ((dcst (downcase sorting-type)) extractfun comparefun) ;; Define the appropriate functions (cond ((= dcst ?n) (setq extractfun 'string-to-number comparefun (if (= dcst sorting-type) '< '>))) ((= dcst ?a) (setq extractfun (if with-case (lambda(x) (org-sort-remove-invisible x)) (lambda(x) (downcase (org-sort-remove-invisible x)))) comparefun (if (= dcst sorting-type) 'string< (lambda (a b) (and (not (string< a b)) (not (string= a b))))))) ((= dcst ?t) (setq extractfun (lambda (x) (if (or (string-match org-ts-regexp x) (string-match org-ts-regexp-both x)) (org-float-time (org-time-string-to-time (match-string 0 x))) 0)) comparefun (if (= dcst sorting-type) '< '>))) (t (error "Invalid sorting type `%c'" sorting-type))) (sort (mapcar (lambda (x) (cons (funcall extractfun (car x)) (cdr x))) table) (lambda (a b) (funcall comparefun (car a) (car b))))))

    Read the article

  • error in auth.log but can login; LDAP/PAM

    - by Peter
    I have a server running OpenLDAP. When I start a ssh-session I can log in without problems, but an error appears in the logs. This only happens when I log in with a LDAP account (so not with a system account such as root). Any help to eliminate these errors would be much appreciated. The relevant piece from /var/log/auth.log sshd[6235]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=example.com user=peter sshd[6235]: Accepted password for peter from 192.168.1.2 port 2441 ssh2 sshd[6235]: pam_unix(sshd:session): session opened for user peter by (uid=0) pam common-session session [default=1] pam_permit.so session required pam_unix.so session optional pam_ldap.so session required pam_mkhomedir.so skel=/etc/skel umask=0022 session required pam_limits.so session required pam_unix.so session optional pam_ldap.so pam common-auth auth [success=1 default=ignore] pam_ldap.so auth required pam_unix.so nullok_secure use_first_pass auth required pam_permit.so session required pam_mkhomedir.so skel=/etc/skel umask=0022 silent auth sufficient pam_unix.so nullok_secure use_first_pass auth requisite pam_succeed_if.so uid >= 1000 quiet auth sufficient pam_ldap.so use_first_pass auth required pam_deny.so pam common-account account [success=2 new_authtok_reqd=done default=ignore] pam_ldap.so account [success=1 default=ignore] pam_unix.so account required pam_unix.so account sufficient pam_succeed_if.so uid < 1000 quiet account [default=bad success=ok user_unknown=ignore] pam_ldap.so account required pam_permit.so account sufficient pam_ldap.so account sufficient pam_unix.so

    Read the article

  • BTrFS crashhhh?

    - by bumbling fool
    I create a new BTrFS raid10 file system using two 250GB drives and the second partition on a third 80GB drive. I create a subvol and snapshot. I mount the snapshot and start copying 8GB of data to it. It gets to around 1GB and the Desktop disappears and what looks like a non interactive terminal comes up with dump/crash information. I don't have a camera handy or I'd take a picture and post it. It basically looks like stack trace info. CTRL-ALT F7 will eventually bring back the Desktop though but the entire BTrFS portion of the OS is hung and non responsive until I reboot. I've reformated and reproduced this problem 3 times now and I'm about to give up :( I realize it is possible this problem is not entirely BTrFS' fault because I'm on natty which is still alpha. More granular details in case I'm an idiot: 1) Create FS: sudo mkfs.btrfs -m raid10 -d raid10 /dev/sda2 /dev/sdb /dev/sdc 2) Initial temporary mount: mkdir /btrfs && sudo mount -t btrfs /dev/sda2 /btrfs 3) Create subvol btrfs s c /btrfs/vm 4) Create initial snapshot: (optional) btrfs s sn /btrfs/cantremember.snap.something 5)unmount /btrfs and mount /btrfs/vm sudo mount -t btrfs -o subvol=vm /dev/sda2 /btrfs/vm 6) Copy data to subvolume. 7) Balance data across drives: (optional) btrfs f bal <path> (never get to this step 7...) Am I doing something wrong?

    Read the article

  • systemd: enabling cherokee service as a `unit file`

    - by Calvin Cheng
    So I am learning how to use systemd to initialize my services automatically on server reboot. So of course, I first make sure I have systemd and some optional systemd related packages installed. pacman -S systemd initscripts-systemd Installation seems to go well and checking, I can see that systemd and its dependency libsystemd are installed. And the optional package initscripts-systemd is also installed:- [root@li280-195 ~]# pacman -Ss systemd extra/libsystemd 44-5 [installed] systemd client libraries extra/systemd 44-5 [installed] system and service manager extra/systemd-sysvcompat 2-2 sysvinit compat symlinks for systemd community/initscripts-systemd 20120412-1 [installed] Arch specific systemd initialization/bootup scripts for systemd community/systemd-arch-units 20120412-2 Arch specific Systemd unit files Next, I ensure that systemd is loaded up when my server reboots, via grub in grub's /boot/grub/menu.lst file like this:- kernel /boot/vmlinuz root=/dev/xvda ro init=/bin/systemd Rebooting my server to check, all loads up well and I can check that systemd is operational via:- systemctl list-unit-files However, I don't see my cherokee initialization script (which is simply created at /etc/rc.d/cherokee when I installed cherokee earlier via pacman -S cherokee) being listed as one of my unit files. So the question is, how do I do that? How do I put my cherokee initialization script under systemd's control?

    Read the article

  • How to cache authentication in Linux using PAM/Kerberos authentication (for CVS)?

    - by Calonthar
    We have several Linux servers that authenticate Linux user passwords on our Windows Active Directory Server using PAM and Kerberos 5. The Linux distro we use is CentOS 6. On one system, we have several Version Control Systems like CVS and Subversion, both of which authenticate users throug PAM, such that users can use their normal Unix resp. Windows AD accounts. Since we started using Kerberos for password authentication, we experienced that CVS on a client machine is often much slower in establishing a connection. CVS authenticates the user on every request (eg. cvs diff, log, update...). Is is possible to cache the credentials that kerberos uses, sucht that is does not need to ask the Windows AD server every time a user executes a cvs action? Our PAM config /etc/pam.d/system-auth looks like the following: auth required pam_env.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth sufficient pam_krb5.so use_first_pass auth required pam_deny.so account required pam_unix.so broken_shadow account sufficient pam_succeed_if.so uid < 500 quiet account [default=bad success=ok user_unknown=ignore] pam_krb5.so account required pam_permit.so password requisite pam_cracklib.so try_first_pass retry=3 password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok password sufficient pam_krb5.so use_authtok password required pam_deny.so session optional pam_keyinit.so revoke session required pam_limits.so session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so session optional pam_krb5.so

    Read the article

  • ubuntu preseed installation keep missing mirror files

    - by JackWu
    Install ubuntu12.04.2 with preseed file, but there is one buggy problem about preseed mirror setting. The symptom here is installing process got stuck. So I track down the log file, and find out the real problem, the installation is looking for a file that's not there. This is just one of them, another pops up if I faked this file. This all happened during preseed, so I believe preseed has something to do with this. I google ubuntu preseed mirror and find this post saying: # If you select ftp, the mirror/country string does not need to be set. #d-i mirror/protocol string ftp d-i mirror/country string manual d-i mirror/http/hostname string archive.ubuntu.com d-i mirror/http/directory string /ubuntu d-i mirror/http/proxy string # Alternatively: by default, the installer uses CC.archive.ubuntu.com where # CC is the ISO-3166-2 code for the selected country. You can preseed this # so that it does so without asking. #d-i mirror/http/mirror select CC.archive.ubuntu.com # Suite to install. #d-i mirror/suite string lucid # Suite to use for loading installer components (optional). #d-i mirror/udeb/suite string lucid # Components to use for loading installer components (optional). #d-i mirror/udeb/components multiselect main, restricted I wonder the difference between d-i mirror/http/hostname and d-i mirror/http/mirror, I mean they all specify a mirror, right? In my preseed file, this is no d-i mirror/http/mirror, and d-i mirror/http/hostname points to my own repo as you might notice in the previous image. Here is my question: Does preseed fetches file/resource from internet, if I use local repo? Why it's looking for file that's not even there? This has bothered for quite time, many thanks in advance to anyone who might give any help.

    Read the article

  • System requirements for running windows 8 (basic office use) in virtualbox (ubuntu as host os)

    - by Tor Thommesen
    I want to run windows 8 as a guest os with virtualbox on some thinkpad (haven't bought one yet) running Ubuntu 12.04. Apart from virtualizing windows 8 (mostly just for use with the office suite app) my needs are very modest, I don't need much more than emacs and a browser. What I'd like to know is what kind of specs will be necessary to run windows 8 well as a vm, using the office apps. It would be a shame to waste money on overpowered hardware. Are there any official guidelines from oracle or windows on this? Would this lenovo x220, for example, be sufficiently strong? The specs below were taken from this review. Intel Core i5-2520M dual-core processor (2.5GHz, 3MB cache, 3.2GHz Turbo frequency) Windows 7 Professional (64-bit) 12.5-inch Premium HD (1366 x 768) LED Backlit Display (IPS) Intel Integrated HD Graphics 4GB DDR3 (1333MHz) 320GB Hitachi Travelstar hard drive (Z7K320) Intel Centrino Advanced-N 6205 (Taylor Peak) 2x2 AGN wireless card Intel 82579LM Gigabit Ethernet 720p High Definition webcam Fingerprint reader 6-cell battery (63Wh) and optional slice battery (65Wh) Dimensions: 12 (L) x 8.2 (W) x 0.5-1.5 (H) inches with 6-cell battery Weight: 3.5 pounds with 6-cell battery 4.875 pounds with 6-cell battery and optional external battery slice Price as configured: $1,299.00 (starting at $979.00)

    Read the article

  • How to Reuse Your Old Wi-Fi Router as a Network Switch

    - by Jason Fitzpatrick
    Just because your old Wi-Fi router has been replaced by a newer model doesn’t mean it needs to gather dust in the closet. Read on as we show you how to take an old and underpowered Wi-Fi router and turn it into a respectable network switch (saving your $20 in the process). Image by mmgallan. Why Do I Want To Do This? Wi-Fi technology has changed significantly in the last ten years but Ethernet-based networking has changed very little. As such, a Wi-Fi router with 2006-era guts is lagging significantly behind current Wi-Fi router technology, but the Ethernet networking component of the device is just as useful as ever; aside from potentially being only 100Mbs instead of 1000Mbs capable (which for 99% of home applications is irrelevant) Ethernet is Ethernet. What does this matter to you, the consumer? It means that even though your old router doesn’t hack it for your Wi-Fi needs any longer the device is still a perfectly serviceable (and high quality) network switch. When do you need a network switch? Any time you want to share an Ethernet cable among multiple devices, you need a switch. For example, let’s say you have a single Ethernet wall jack behind your entertainment center. Unfortunately you have four devices that you want to link to your local network via hardline including your smart HDTV, DVR, Xbox, and a little Raspberry Pi running XBMC. Instead of spending $20-30 to purchase a brand new switch of comparable build quality to your old Wi-Fi router it makes financial sense (and is environmentally friendly) to invest five minutes of your time tweaking the settings on the old router to turn it from a Wi-Fi access point and routing tool into a network switch–perfect for dropping behind your entertainment center so that your DVR, Xbox, and media center computer can all share an Ethernet connection. What Do I Need? For this tutorial you’ll need a few things, all of which you likely have readily on hand or are free for download. To follow the basic portion of the tutorial, you’ll need the following: 1 Wi-Fi router with Ethernet ports 1 Computer with Ethernet jack 1 Ethernet cable For the advanced tutorial you’ll need all of those things, plus: 1 copy of DD-WRT firmware for your Wi-Fi router We’re conducting the experiment with a Linksys WRT54GL Wi-Fi router. The WRT54 series is one of the best selling Wi-Fi router series of all time and there’s a good chance a significant number of readers have one (or more) of them stuffed in an office closet. Even if you don’t have one of the WRT54 series routers, however, the principles we’re outlining here apply to all Wi-Fi routers; as long as your router administration panel allows the necessary changes you can follow right along with us. A quick note on the difference between the basic and advanced versions of this tutorial before we proceed. Your typical Wi-Fi router has 5 Ethernet ports on the back: 1 labeled “Internet”, “WAN”, or a variation thereof and intended to be connected to your DSL/Cable modem, and 4 labeled 1-4 intended to connect Ethernet devices like computers, printers, and game consoles directly to the Wi-Fi router. When you convert a Wi-Fi router to a switch, in most situations, you’ll lose two port as the “Internet” port cannot be used as a normal switch port and one of the switch ports becomes the input port for the Ethernet cable linking the switch to the main network. This means, referencing the diagram above, you’d lose the WAN port and LAN port 1, but retain LAN ports 2, 3, and 4 for use. If you only need to switch for 2-3 devices this may be satisfactory. However, for those of you that would prefer a more traditional switch setup where there is a dedicated WAN port and the rest of the ports are accessible, you’ll need to flash a third-party router firmware like the powerful DD-WRT onto your device. Doing so opens up the router to a greater degree of modification and allows you to assign the previously reserved WAN port to the switch, thus opening up LAN ports 1-4. Even if you don’t intend to use that extra port, DD-WRT offers you so many more options that it’s worth the extra few steps. Preparing Your Router for Life as a Switch Before we jump right in to shutting down the Wi-Fi functionality and repurposing your device as a network switch, there are a few important prep steps to attend to. First, you want to reset the router (if you just flashed a new firmware to your router, skip this step). Following the reset procedures for your particular router or go with what is known as the “Peacock Method” wherein you hold down the reset button for thirty seconds, unplug the router and wait (while still holding the reset button) for thirty seconds, and then plug it in while, again, continuing to hold down the rest button. Over the life of a router there are a variety of changes made, big and small, so it’s best to wipe them all back to the factory default before repurposing the router as a switch. Second, after resetting, we need to change the IP address of the device on the local network to an address which does not directly conflict with the new router. The typical default IP address for a home router is 192.168.1.1; if you ever need to get back into the administration panel of the router-turned-switch to check on things or make changes it will be a real hassle if the IP address of the device conflicts with the new home router. The simplest way to deal with this is to assign an address close to the actual router address but outside the range of addresses that your router will assign via the DHCP client; a good pick then is 192.168.1.2. Once the router is reset (or re-flashed) and has been assigned a new IP address, it’s time to configure it as a switch. Basic Router to Switch Configuration If you don’t want to (or need to) flash new firmware onto your device to open up that extra port, this is the section of the tutorial for you: we’ll cover how to take a stock router, our previously mentioned WRT54 series Linksys, and convert it to a switch. Hook the Wi-Fi router up to the network via one of the LAN ports (consider the WAN port as good as dead from this point forward, unless you start using the router in its traditional function again or later flash a more advanced firmware to the device, the port is officially retired at this point). Open the administration control panel via  web browser on a connected computer. Before we get started two things: first,  anything we don’t explicitly instruct you to change should be left in the default factory-reset setting as you find it, and two, change the settings in the order we list them as some settings can’t be changed after certain features are disabled. To start, let’s navigate to Setup ->Basic Setup. Here you need to change the following things: Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable Save with the “Save Settings” button and then navigate to Setup -> Advanced Routing: Operating Mode: Router This particular setting is very counterintuitive. The “Operating Mode” toggle tells the device whether or not it should enable the Network Address Translation (NAT)  feature. Because we’re turning a smart piece of networking hardware into a relatively dumb one, we don’t need this feature so we switch from Gateway mode (NAT on) to Router mode (NAT off). Our next stop is Wireless -> Basic Wireless Settings: Wireless SSID Broadcast: Disable Wireless Network Mode: Disabled After disabling the wireless we’re going to, again, do something counterintuitive. Navigate to Wireless -> Wireless Security and set the following parameters: Security Mode: WPA2 Personal WPA Algorithms: TKIP+AES WPA Shared Key: [select some random string of letters, numbers, and symbols like JF#d$di!Hdgio890] Now you may be asking yourself, why on Earth are we setting a rather secure Wi-Fi configuration on a Wi-Fi router we’re not going to use as a Wi-Fi node? On the off chance that something strange happens after, say, a power outage when your router-turned-switch cycles on and off a bunch of times and the Wi-Fi functionality is activated we don’t want to be running the Wi-Fi node wide open and granting unfettered access to your network. While the chances of this are next-to-nonexistent, it takes only a few seconds to apply the security measure so there’s little reason not to. Save your changes and navigate to Security ->Firewall. Uncheck everything but Filter Multicast Firewall Protect: Disable At this point you can save your changes again, review the changes you’ve made to ensure they all stuck, and then deploy your “new” switch wherever it is needed. Advanced Router to Switch Configuration For the advanced configuration, you’ll need a copy of DD-WRT installed on your router. Although doing so is an extra few steps, it gives you a lot more control over the process and liberates an extra port on the device. Hook the Wi-Fi router up to the network via one of the LAN ports (later you can switch the cable to the WAN port). Open the administration control panel via web browser on the connected computer. Navigate to the Setup -> Basic Setup tab to get started. In the Basic Setup tab, ensure the following settings are adjusted. The setting changes are not optional and are required to turn the Wi-Fi router into a switch. WAN Connection Type: Disabled Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable In addition to disabling the DHCP server, also uncheck all the DNSMasq boxes as the bottom of the DHCP sub-menu. If you want to activate the extra port (and why wouldn’t you), in the WAN port section: Assign WAN Port to Switch [X] At this point the router has become a switch and you have access to the WAN port so the LAN ports are all free. Since we’re already in the control panel, however, we might as well flip a few optional toggles that further lock down the switch and prevent something odd from happening. The optional settings are arranged via the menu you find them in. Remember to save your settings with the save button before moving onto a new tab. While still in the Setup -> Basic Setup menu, change the following: Gateway/Local DNS : [IP address of primary router, e.g. 192.168.1.1] NTP Client : Disable The next step is to turn off the radio completely (which not only kills the Wi-Fi but actually powers the physical radio chip off). Navigate to Wireless -> Advanced Settings -> Radio Time Restrictions: Radio Scheduling: Enable Select “Always Off” There’s no need to create a potential security problem by leaving the Wi-Fi radio on, the above toggle turns it completely off. Under Services -> Services: DNSMasq : Disable ttraff Daemon : Disable Under the Security -> Firewall tab, uncheck every box except “Filter Multicast”, as seen in the screenshot above, and then disable SPI Firewall. Once you’re done here save and move on to the Administration tab. Under Administration -> Management:  Info Site Password Protection : Enable Info Site MAC Masking : Disable CRON : Disable 802.1x : Disable Routing : Disable After this final round of tweaks, save and then apply your settings. Your router has now been, strategically, dumbed down enough to plod along as a very dependable little switch. Time to stuff it behind your desk or entertainment center and streamline your cabling.     

    Read the article

  • jQuery CSS Property Monitoring Plug-in updated

    - by Rick Strahl
    A few weeks back I had talked about the need to watch properties of an object and be able to take action when certain values changed. The need for this arose out of wanting to build generic components that could 'attach' themselves to other objects. One example is a drop shadow - if I add a shadow behavior to an object I want the shadow to be pinned to that object so when that object moves I also want the shadow to move with it, or when the panel is hidden the shadow should hide with it - automatically without having to explicitly hook up monitoring code to the panel. For example, in my shadow plug-in I can now do something like this (where el is the element that has the shadow attached and sh is the shadow): if (!exists) // if shadow was created el.watch("left,top,width,height,display", function() { if (el.is(":visible")) $(this).shadow(opt); // redraw else sh.hide(); }, 100, "_shadowMove"); The code now monitors several properties and if any of them change the provided function is called. So when the target object is moved or hidden or resized the watcher function is called and the shadow can be redrawn or hidden in the case of visibility going away. So if you run any of the following code: $("#box") .shadow() .draggable({ handle: ".blockheader" }); // drag around the box - shadow should follow // hide the box - shadow should disappear with box setTimeout(function() { $("#box").hide(); }, 4000); // show the box - shadow should come back too setTimeout(function() { $("#box").show(); }, 8000); This can be very handy functionality when you're dealing with objects or operations that you need to track generically and there are no native events for them. For example, with a generic shadow object that attaches itself to any another element there's no way that I know of to track whether the object has been moved or hidden either via some UI operation (like dragging) or via code. While some UI operations like jQuery.ui.draggable would allow events to fire when the mouse is moved nothing of the sort exists if you modify locations in code. Even tracking the object in drag mode this is hardly generic behavior - a generic shadow implementation can't know when dragging is hooked up. So the watcher provides an alternative that basically gives an Observer like pattern that notifies you when something you're interested in changes. In the watcher hookup code (in the shadow() plugin) above  a check is made if the object is visible and if it is the shadow is redrawn. Otherwise the shadow is hidden. The first parameter is a list of CSS properties to be monitored followed by the function that is called. The function called receives this as the element that's been changed and receives two parameters: The array of watched objects with their current values, plus an index to the object that caused the change function to fire. How does it work When I wrote it about this last time I started out with a simple timer that would poll for changes at a fixed interval with setInterval(). A few folks commented that there are is a DOM API - DOMAttrmodified in Mozilla and propertychange in IE that allow notification whenever any property changes which is much more efficient and smooth than the setInterval approach I used previously. On browser that support these events (FireFox and IE basically - WebKit has the DOMAttrModified event but it doesn't appear to work) the shadow effect is instant - no 'drag behind' of the shadow. Running on a browser that doesn't support still uses setInterval() and the shadow movement is slightly delayed which looks sloppy. There are a few additional changes to this code - it also supports monitoring multiple CSS properties now so a single object can monitor a host of CSS properties rather than one object per property which is easier to work with. For display purposes position, bounds and visibility will be common properties that are to be watched. Here's what the new version looks like: $.fn.watch = function (props, func, interval, id) { /// <summary> /// Allows you to monitor changes in a specific /// CSS property of an element by polling the value. /// when the value changes a function is called. /// The function called is called in the context /// of the selected element (ie. this) /// </summary> /// <param name="prop" type="String">CSS Properties to watch sep. by commas</param> /// <param name="func" type="Function"> /// Function called when the value has changed. /// </param> /// <param name="interval" type="Number"> /// Optional interval for browsers that don't support DOMAttrModified or propertychange events. /// Determines the interval used for setInterval calls. /// </param> /// <param name="id" type="String">A unique ID that identifies this watch instance on this element</param> /// <returns type="jQuery" /> if (!interval) interval = 200; if (!id) id = "_watcher"; return this.each(function () { var _t = this; var el$ = $(this); var fnc = function () { __watcher.call(_t, id) }; var itId = null; var data = { id: id, props: props.split(","), func: func, vals: [props.split(",").length], fnc: fnc, origProps: props, interval: interval }; $.each(data.props, function (i) { data.vals[i] = el$.css(data.props[i]); }); el$.data(id, data); hookChange(el$, id, data.fnc); }); function hookChange(el$, id, fnc) { el$.each(function () { var el = $(this); if (typeof (el.get(0).onpropertychange) == "object") el.bind("propertychange." + id, fnc); else if ($.browser.mozilla) el.bind("DOMAttrModified." + id, fnc); else itId = setInterval(fnc, interval); }); } function __watcher(id) { var el$ = $(this); var w = el$.data(id); if (!w) return; var _t = this; if (!w.func) return; // must unbind or else unwanted recursion may occur el$.unwatch(id); var changed = false; var i = 0; for (i; i < w.props.length; i++) { var newVal = el$.css(w.props[i]); if (w.vals[i] != newVal) { w.vals[i] = newVal; changed = true; break; } } if (changed) w.func.call(_t, w, i); // rebind event hookChange(el$, id, w.fnc); } } $.fn.unwatch = function (id) { this.each(function () { var el = $(this); var fnc = el.data(id).fnc; try { if (typeof (this.onpropertychange) == "object") el.unbind("propertychange." + id, fnc); else if ($.browser.mozilla) el.unbind("DOMAttrModified." + id, fnc); else clearInterval(id); } // ignore if element was already unbound catch (e) { } }); return this; } There are basically two jQuery functions - watch and unwatch. jQuery.fn.watch(props,func,interval,id) Starts watching an element for changes in the properties specified. props The CSS properties that are to be watched for changes. If any of the specified properties changes the function specified in the second parameter is fired. func (watchData,index) The function fired in response to a changed property. Receives this as the element changed and object that represents the watched properties and their respective values. The first parameter is passed in this structure:    { id: itId, props: [], func: func, vals: [] }; A second parameter is the index of the changed property so data.props[i] or data.vals[i] gets the property value that has changed. interval The interval for setInterval() for those browsers that don't support property watching in the DOM. In milliseconds. id An optional id that identifies this watcher. Required only if multiple watchers might be hooked up to the same element. The default is _watcher if not specified. jQuery.fn.unwatch(id) Unhooks watching of the element by disconnecting the event handlers. id Optional watcher id that was specified in the call to watch. This value can be omitted to use the default value of _watcher. You can also grab the latest version of the  code for this plug-in as well as the shadow in the full library at: http://www.west-wind.com:8080/svn/jquery/trunk/jQueryControls/Resources/ww.jquery.js watcher has no other dependencies although it lives in this larger library. The shadow plug-in depends on watcher.© Rick Strahl, West Wind Technologies, 2005-2011

    Read the article

  • C#: Handling Notifications: inheritance, events, or delegates?

    - by James Michael Hare
    Often times as developers we have to design a class where we get notification when certain things happen. In older object-oriented code this would often be implemented by overriding methods -- with events, delegates, and interfaces, however, we have far more elegant options. So, when should you use each of these methods and what are their strengths and weaknesses? Now, for the purposes of this article when I say notification, I'm just talking about ways for a class to let a user know that something has occurred. This can be through any programmatic means such as inheritance, events, delegates, etc. So let's build some context. I'm sitting here thinking about a provider neutral messaging layer for the place I work, and I got to the point where I needed to design the message subscriber which will receive messages from the message bus. Basically, what we want is to be able to create a message listener and have it be called whenever a new message arrives. Now, back before the flood we would have done this via inheritance and an abstract class: 1:  2: // using inheritance - omitting argument null checks and halt logic 3: public abstract class MessageListener 4: { 5: private ISubscriber _subscriber; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber) 11: { 12: _subscriber = subscriber; 13: _messageThread = new Thread(MessageLoop); 14: _messageThread.Start(); 15: } 16:  17: // user will override this to process their messages 18: protected abstract void OnMessageReceived(Message msg); 19:  20: // handle the looping in the thread 21: private void MessageLoop() 22: { 23: while(!_isHalted) 24: { 25: // as long as processing, wait 1 second for message 26: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 27: if(msg != null) 28: { 29: OnMessageReceived(msg); 30: } 31: } 32: } 33: ... 34: } It seems so odd to write this kind of code now. Does it feel odd to you? Maybe it's just because I've gotten so used to delegation that I really don't like the feel of this. To me it is akin to saying that if I want to drive my car I need to derive a new instance of it just to put myself in the driver's seat. And yet, unquestionably, five years ago I would have probably written the code as you see above. To me, inheritance is a flawed approach for notifications due to several reasons: Inheritance is one of the HIGHEST forms of coupling. You can't seal the listener class because it depends on sub-classing to work. Because C# does not allow multiple-inheritance, I've spent my one inheritance implementing this class. Every time you need to listen to a bus, you have to derive a class which leads to lots of trivial sub-classes. The act of consuming a message should be a separate responsibility than the act of listening for a message (SRP). Inheritance is such a strong statement (this IS-A that) that it should only be used in building type hierarchies and not for overriding use-specific behaviors and notifications. Chances are, if a class needs to be inherited to be used, it most likely is not designed as well as it could be in today's modern programming languages. So lets look at the other tools available to us for getting notified instead. Here's a few other choices to consider. Have the listener expose a MessageReceived event. Have the listener accept a new IMessageHandler interface instance. Have the listener accept an Action<Message> delegate. Really, all of these are different forms of delegation. Now, .NET events are a bit heavier than the other types of delegates in terms of run-time execution, but they are a great way to allow others using your class to subscribe to your events: 1: // using event - ommiting argument null checks and halt logic 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private bool _isHalted = false; 6: private Thread _messageThread; 7:  8: // assign the subscriber and start the messaging loop 9: public MessageListener(ISubscriber subscriber) 10: { 11: _subscriber = subscriber; 12: _messageThread = new Thread(MessageLoop); 13: _messageThread.Start(); 14: } 15:  16: // user will override this to process their messages 17: public event Action<Message> MessageReceived; 18:  19: // handle the looping in the thread 20: private void MessageLoop() 21: { 22: while(!_isHalted) 23: { 24: // as long as processing, wait 1 second for message 25: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 26: if(msg != null && MessageReceived != null) 27: { 28: MessageReceived(msg); 29: } 30: } 31: } 32: } Note, now we can seal the class to avoid changes and the user just needs to provide a message handling method: 1: theListener.MessageReceived += CustomReceiveMethod; However, personally I don't think events hold up as well in this case because events are largely optional. To me, what is the point of a listener if you create one with no event listeners? So in my mind, use events when handling the notification is optional. So how about the delegation via interface? I personally like this method quite a bit. Basically what it does is similar to inheritance method mentioned first, but better because it makes it easy to split the part of the class that doesn't change (the base listener behavior) from the part that does change (the user-specified action after receiving a message). So assuming we had an interface like: 1: public interface IMessageHandler 2: { 3: void OnMessageReceived(Message receivedMessage); 4: } Our listener would look like this: 1: // using delegation via interface - omitting argument null checks and halt logic 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private IMessageHandler _handler; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber, IMessageHandler handler) 11: { 12: _subscriber = subscriber; 13: _handler = handler; 14: _messageThread = new Thread(MessageLoop); 15: _messageThread.Start(); 16: } 17:  18: // handle the looping in the thread 19: private void MessageLoop() 20: { 21: while(!_isHalted) 22: { 23: // as long as processing, wait 1 second for message 24: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 25: if(msg != null) 26: { 27: _handler.OnMessageReceived(msg); 28: } 29: } 30: } 31: } And they would call it by creating a class that implements IMessageHandler and pass that instance into the constructor of the listener. I like that this alleviates the issues of inheritance and essentially forces you to provide a handler (as opposed to events) on construction. Well, this is good, but personally I think we could go one step further. While I like this better than events or inheritance, it still forces you to implement a specific method name. What if that name collides? Furthermore if you have lots of these you end up either with large classes inheriting multiple interfaces to implement one method, or lots of small classes. Also, if you had one class that wanted to manage messages from two different subscribers differently, it wouldn't be able to because the interface can't be overloaded. This brings me to using delegates directly. In general, every time I think about creating an interface for something, and if that interface contains only one method, I start thinking a delegate is a better approach. Now, that said delegates don't accomplish everything an interface can. Obviously having the interface allows you to refer to the classes that implement the interface which can be very handy. In this case, though, really all you want is a method to handle the messages. So let's look at a method delegate: 1: // using delegation via delegate - omitting argument null checks and halt logic 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private Action<Message> _handler; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber, Action<Message> handler) 11: { 12: _subscriber = subscriber; 13: _handler = handler; 14: _messageThread = new Thread(MessageLoop); 15: _messageThread.Start(); 16: } 17:  18: // handle the looping in the thread 19: private void MessageLoop() 20: { 21: while(!_isHalted) 22: { 23: // as long as processing, wait 1 second for message 24: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 25: if(msg != null) 26: { 27: _handler(msg); 28: } 29: } 30: } 31: } Here the MessageListener now takes an Action<Message>.  For those of you unfamiliar with the pre-defined delegate types in .NET, that is a method with the signature: void SomeMethodName(Message). The great thing about delegates is it gives you a lot of power. You could create an anonymous delegate, a lambda, or specify any other method as long as it satisfies the Action<Message> signature. This way, you don't need to define an arbitrary helper class or name the method a specific thing. Incidentally, we could combine both the interface and delegate approach to allow maximum flexibility. Doing this, the user could either pass in a delegate, or specify a delegate interface: 1: // using delegation - give users choice of interface or delegate 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private Action<Message> _handler; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber, Action<Message> handler) 11: { 12: _subscriber = subscriber; 13: _handler = handler; 14: _messageThread = new Thread(MessageLoop); 15: _messageThread.Start(); 16: } 17:  18: // passes the interface method as a delegate using method group 19: public MessageListener(ISubscriber subscriber, IMessageHandler handler) 20: : this(subscriber, handler.OnMessageReceived) 21: { 22: } 23:  24: // handle the looping in the thread 25: private void MessageLoop() 26: { 27: while(!_isHalted) 28: { 29: // as long as processing, wait 1 second for message 30: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 31: if(msg != null) 32: { 33: _handler(msg); 34: } 35: } 36: } 37: } } This is the method I tend to prefer because it allows the user of the class to choose which method works best for them. You may be curious about the actual performance of these different methods. 1: Enter iterations: 2: 1000000 3:  4: Inheritance took 4 ms. 5: Events took 7 ms. 6: Interface delegation took 4 ms. 7: Lambda delegate took 5 ms. Before you get too caught up in the numbers, however, keep in mind that this is performance over over 1,000,000 iterations. Since they are all < 10 ms which boils down to fractions of a micro-second per iteration so really any of them are a fine choice performance wise. As such, I think the choice of what to do really boils down to what you're trying to do. Here's my guidelines: Inheritance should be used only when defining a collection of related types with implementation specific behaviors, it should not be used as a hook for users to add their own functionality. Events should be used when subscription is optional or multi-cast is desired. Interface delegation should be used when you wish to refer to implementing classes by the interface type or if the type requires several methods to be implemented. Delegate method delegation should be used when you only need to provide one method and do not need to refer to implementers by the interface name.

    Read the article

  • The Return Of __FILE__ And __LINE__ In .NET 4.5

    - by Alois Kraus
    Good things are hard to kill. One of the most useful predefined compiler macros in C/C++ were __FILE__ and __LINE__ which do expand to the compilation units file name and line number where this value is encountered by the compiler. After 4.5 versions of .NET we are on par with C/C++ again. It is of course not a simple compiler expandable macro it is an attribute but it does serve exactly the same purpose. Now we do get CallerLineNumberAttribute  == __LINE__ CallerFilePathAttribute        == __FILE__ CallerMemberNameAttribute  == __FUNCTION__ (MSVC Extension)   The most important one is CallerMemberNameAttribute which is very useful to implement the INotifyPropertyChanged interface without the need to hard code the name of the property anymore. Now you can simply decorate your change method with the new CallerMemberName attribute and you get the property name as string directly inserted by the C# compiler at compile time.   public string UserName { get { return _userName; } set { _userName=value; RaisePropertyChanged(); // no more RaisePropertyChanged(“UserName”)! } } protected void RaisePropertyChanged([CallerMemberName] string member = "") { var copy = PropertyChanged; if(copy != null) { copy(new PropertyChangedEventArgs(this, member)); } } Nice and handy. This was obviously the prime reason to implement this feature in the C# 5.0 compiler. You can repurpose this feature for tracing to get your hands on the method name of your caller along other stuff very fast now. All infos are added during compile time which is much faster than other approaches like walking the stack. The example on MSDN shows the usage of this attribute with an example public static void TraceMessage(string message, [CallerMemberName] string memberName = "", [CallerFilePath] string sourceFilePath = "", [CallerLineNumber] int sourceLineNumber = 0) { Console.WriteLine("Hi {0} {1} {2}({3})", message, memberName, sourceFilePath, sourceLineNumber); }   When I do think of tracing I do usually want to have a API which allows me to Trace method enter and leave Trace messages with a severity like Info, Warning, Error When I do print a trace message it is very useful to print out method and type name as well. So your API must either be able to pass the method and type name as strings or extract it automatically via walking back one Stackframe and fetch the infos from there. The first glaring deficiency is that there is no CallerTypeAttribute yet because the C# compiler team was not satisfied with its performance.   A usable Trace Api might therefore look like   enum TraceTypes { None = 0, EnterLeave = 1 << 0, Info = 1 << 1, Warn = 1 << 2, Error = 1 << 3 } class Tracer : IDisposable { string Type; string Method; public Tracer(string type, string method) { Type = type; Method = method; if (IsEnabled(TraceTypes.EnterLeave,Type, Method)) { } } private bool IsEnabled(TraceTypes traceTypes, string Type, string Method) { // Do checking here if tracing is enabled return false; } public void Info(string fmt, params object[] args) { } public void Warn(string fmt, params object[] args) { } public void Error(string fmt, params object[] args) { } public static void Info(string type, string method, string fmt, params object[] args) { } public static void Warn(string type, string method, string fmt, params object[] args) { } public static void Error(string type, string method, string fmt, params object[] args) { } public void Dispose() { // trace method leave } } This minimal trace API is very fast but hard to maintain since you need to pass in the type and method name as hard coded strings which can change from time to time. But now we have at least CallerMemberName to rid of the explicit method parameter right? Not really. Since any acceptable usable trace Api should have a method signature like Tracexxx(… string fmt, params [] object args) we not able to add additional optional parameters after the args array. If we would put it before the format string we would need to make it optional as well which would mean the compiler would need to figure out what our trace message and arguments are (not likely) or we would need to specify everything explicitly just like before . There are ways around this by providing a myriad of overloads which in the end are routed to the very same method but that is ugly. I am not sure if nobody inside MS agrees that the above API is reasonable to have or (more likely) that the whole talk about you can use this feature for diagnostic purposes was not a core feature at all but a simple byproduct of making the life of INotifyPropertyChanged implementers easier. A way around this would be to allow for variable argument arrays after the params keyword another set of optional arguments which are always filled by the compiler but I do not know if this is an easy one. The thing I am missing much more is the not provided CallerType attribute. But not in the way you would think of. In the API above I did add some filtering based on method and type to stay as fast as possible for types where tracing is not enabled at all. It should be no more expensive than an additional method call and a bool variable check if tracing for this type is enabled at all. The data is tightly bound to the calling type and method and should therefore become part of the static type instance. Since extending the CLR type system for tracing is not something I do expect to happen I have come up with an alternative approach which allows me basically to attach run time data to any existing type object in super fast way. The key to success is the usage of generics.   class Tracer<T> : IDisposable { string Method; public Tracer(string method) { if (TraceData<T>.Instance.Enabled.HasFlag(TraceTypes.EnterLeave)) { } } public void Dispose() { if (TraceData<T>.Instance.Enabled.HasFlag(TraceTypes.EnterLeave)) { } } public static void Info(string fmt, params object[] args) { } /// <summary> /// Every type gets its own instance with a fresh set of variables to describe the /// current filter status. /// </summary> /// <typeparam name="T"></typeparam> internal class TraceData<UsingType> { internal static TraceData<UsingType> Instance = new TraceData<UsingType>(); public bool IsInitialized = false; // flag if we need to reinit the trace data in case of reconfigured trace settings at runtime public TraceTypes Enabled = TraceTypes.None; // Enabled trace levels for this type } } We do not need to pass the type as string or Type object to the trace Api. Instead we define a generic Api that accepts the using type as generic parameter. Then we can create a TraceData static instance which is due to the nature of generics a fresh instance for every new type parameter. My tests on my home machine have shown that this approach is as fast as a simple bool flag check. If you have an application with many types using tracing you do not want to bring the app down by simply enabling tracing for one special rarely used type. The trace filter performance for the types which are not enabled must be therefore the fasted code path. This approach has the nice side effect that if you store the TraceData instances in one global list you can reconfigure tracing at runtime safely by simply setting the IsInitialized flag to false. A similar effect can be achieved with a global static Dictionary<Type,TraceData> object but big hash tables have random memory access semantics which is bad for cache locality and you always need to pay for the lookup which involves hash code generation, equality check and an indexed array access. The generic version is wicked fast and allows you to add more features to your tracing Api with minimal perf overhead. But it is cumbersome to write the generic type argument always explicitly and worse if you do refactor code and move parts of it to other classes it might be that you cannot configure tracing correctly. I would like therefore to decorate my type with an attribute [CallerType] class Tracer<T> : IDisposable to tell the compiler to fill in the generic type argument automatically. class Program { static void Main(string[] args) { using (var t = new Tracer()) // equivalent to new Tracer<Program>() { That would be really useful and super fast since you do not need to pass any type object around but you do have full type infos at hand. This change would be breaking if another non generic type exists in the same namespace where now the generic counterpart would be preferred. But this is an acceptable risk in my opinion since you can today already get conflicts if two generic types of the same name are defined in different namespaces. This would be only a variation of this issue. When you do think about this further you can add more features like to trace the exception in your Dispose method if the method is left with an exception with that little trick I did write some time ago. You can think of tracing as a super fast and configurable switch to write data to an output destination or to execute alternative actions. With such an infrastructure you can e.g. Reconfigure tracing at run time. Take a memory dump when a specific method is left with a specific exception. Throw an exception when a specific trace statement is hit (useful for testing error conditions). Execute a passed delegate which e.g. dumps additional state when enabled. Write data to an in memory ring buffer and dump it when specific events do occur (e.g. method is left with an exception, triggered from outside). Write data to an output device. …. This stuff is really useful to have when your code is in production on a mission critical server and you need to find the root cause of sporadic crashes of your application. It could be a buggy graphics card driver which throws access violations into your application (ok with .NET 4 not anymore except if you enable a compatibility flag) where you would like to have a minidump or you have reached after two weeks of operation a state where you need a full memory dump at a specific point in time in the middle of an transaction. At my older machine I do get with this super fast approach 50 million traces/s when tracing is disabled. When I do know that tracing is enabled for this type I can walk the stack by using StackFrameHelper.GetStackFramesInternal to check further if a specific action or output device is configured for this method which is about 2-3 times faster than the regular StackTrace class. Even with one String.Format I am down to 3 million traces/s so performance is not so important anymore since I do want to do something now. The CallerMemberName feature of the C# 5 compiler is nice but I would have preferred to get direct access to the MethodHandle and not to the stringified version of it. But I really would like to see a CallerType attribute implemented to fill in the generic type argument of the call site to augment the static CLR type data with run time data.

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >