Search Results

Search found 1559 results on 63 pages for 'scott mayfield'.

Page 17/63 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Security of BitLocker with no PIN from WinPE?

    - by Scott Bussinger
    Say you have a computer with the system drive encrypted by BitLocker and you're not using a PIN so the computer will boot up unattended. What happens if an attacker boots the system up into the Windows Preinstallation Environment? Will they have access to the encrypted drive? Does it change if you have a TPM vs. using only a USB startup key? What I'm trying to determine is whether the TPM / USB startup key is usable without booting from the original operating system. In other words, if you're using a USB startup key and the machine is rebooted normally then the data would still be protected unless an attacker was able to log in. But what if the hacker just boots the server into a Windows Preinstallation Environment with the USB startup key plugged in? Would they then have access to the data? Or would that require the recovery key? Ideally the recovery key would be required when booted like this, but I haven't seen this documented anywhere.

    Read the article

  • Lightweight, low cost enterprise backup solution

    - by Scott
    Looking for a backup solution primarily for Windows clients (XP/7), that will either back up to 2 different servers (1 on site, 1 off site - internet - can be our own server), or back up to 1 server and then we would need to somehow backup that server offsite/internet. By lightweight, I mean the backup client software should not eat up much memory and processor since some of the client machines are older. I am used to using Crashplan for home use - the pricing is nice for the amount of backup I get, and it works great / easy to install and get going - I can back up to my own machines locally and over the net. However, the price is going to be a little steep for enterprise level backup, 1500+ machines. Possibly ZManda and Bacula are good choices to consider? Are they light weight? Can the clients/agents be set to go over the net and/or multiple backup servers?

    Read the article

  • How to diagnose computer lockups and freezes?

    - by Scott Mitchell
    I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6 MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256 MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4 GB (2 x 2 GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Resolution I have never did figure out the particular problems, but based on the suggestions here and elsewhere, I'm presuming it was a motherboard issue. In any event, I recently upgraded my system, buying a new motherbeard, PSU, CPU, and RAM, and that new rig has been working splendidly the past several weeks. I am using the same graphic cards as in the old setup, so I think it's safe to reason that they weren't the cause of the problem.

    Read the article

  • Can you please explain substitution in RewriteRule

    - by Scott
    I have the following statements in an .htaccess file RewriteCond %{HTTP_HOST} ^myOldDomain\.com$ [NC] RewriteRule ^(.*)$ https://myNewDomaink.com/$1 [R=301,L] It works fine. I basically found some sample code and modified it to my specific purpose. What I don't quite understand is: Why does $1 refer to the the portion of the supplied url after the hostname - where is the documentation for this? There is no backreference in the RewriteCond.

    Read the article

  • Does the password get sent in the clear when connecting to Sql-Server?

    - by Scott Chamberlain
    I was asked this today and I honestly did not know the answer. If you connect using a connection string without sspi to a server is there any way a 3rd party can intercept on the wire the password used to log in? "Data Source=MyServer;Initial Catalog=MyDatabase;User Id=sa;Password=CanThisBeSniffed;" I am not asking about MiTM attacks just someone listing on the same computer or on the same hub on the network with wireshark or something similar running. I fired up wireshark myself and did not see it in plain text but it could be a simple obfuscation or proper encryption, I just wanted to know which.

    Read the article

  • Macbook Pro + Windows 7 (bootcamp) = Terrible battery life

    - by Scott Beeson
    I recently put Windows 7 Ultimate x64 on my wife's Macbook pro because of some software she bought for her business. Since then, the battery life has been abysmal. I've identified and researched one of the problems, which is display brightness. There is no brightness control in the windows power options, but I did manually turn it down in Bootcamp. However, it is still reporting very low battery life estimates. I'm wondering if this is because Windows thinks the display is at full brightness. Can anyone shed any light on this? (Pun intended). Also, are there any other things to look out for that may improve the battery life? (I mean in the context of Mac + Windows, not in general)

    Read the article

  • Migrating Linux user data to Windows profiles automatically

    - by scott ryan
    I have what seems to be an incredibly simple problem with a very simple solution but I'm having some trouble connecting dots. I have an aging server running Ubuntu Server which hosts roaming profiles. I am switching to a Windows Server 2012 DS shortly. Users used to be named firstinitial.lastname and we are switching to firstname.lastname. I need to transfer things like favorites, documents, etc. from the roaming Linux profile to the user's local Windows profile. So, the way I think it'd work is by using a login script. I think I'd use a script to mount the Linux server's /home for each user, then do copy to various paths (documents, pictures, etc.). But, how do I automate this for each user that logs in? I'm working with a nonprofit, so doing this by hand would probably be out of their budget. I'm open to suggestions, though. What I want is basically Windows Easy Migration, but I'm fairly certain that won't work under Wine... (Kidding, I promise). Thanks!

    Read the article

  • Automatically restarting Perfmon Data Collector Sets

    - by Scott Herbert
    I have a number of User Defined Data Collector Sets running on a Windows 2008R2 server, collecting perfmon stats from various servers. Whenever there is a network interruption, or a server rebooted (at worst, when the server which is running all these DCSs is rebooted), I have to manually restart some or all of the Data Collector Sets. Is there a way to configure them to automatically restart, or otherwise be more resilient?

    Read the article

  • View scheduled recordings remotely

    - by Scott
    I have one computer which is equipped with a TV tuner card. The Recorded TV folder is shared so that other computers on the network can watch recordings. Now that I am upgrading my computers to Windows 7, they have Media Center, which makes for a nicer viewing experience than a Windows Explorer folder view. I have set up Media Center on my laptop to considering the Recorded TV folder on the tuner-equipped PC as an extended library location, so now I can view all the recordings from within Media Center on the laptop. To make this experience even better, is there a way to view the list of scheduled recordings on the tuner-equipped PC from within Media Center on my laptop?

    Read the article

  • Emails Generated From Our Linux Server are Blocked By Our Exchange Server (That Has Barracuda)

    - by Scott
    We have our company website hosted on a Linux machine. It is sending mail via postfix. The emails are working and being sent to all email clients like Gmail. However, we are not receiving the emails on our exchange server. When we look at the logs, we see that the connection is being refused, presumably by the exchange server. postfix/qmgr[11865]: DA6D42FF13: from=<[email protected]>, size=3166, nrcpt=1 (queue active) postfix/smtp[12474]: connect to mail.sanitizeddomain.com[XXX.XXX.XXX.XXX]:25: Connection refused postfix/smtp[12474]: DA6D42FF13: to=<[email protected]>, relay=none, delay=172915, delays=172914/0.03/0.07/0, dsn=4.4.1, status=deferred (connect to mail.sanitizeddomain.com[XXX.XXX.XXX.XXX]:25: Connection refused) We do run Barracuda. We cannot telnet from the linux machine to our mail server b/c we get the same message.

    Read the article

  • outbound ftp on server 2008 r2 stalls

    - by Scott Kramer
    the built in command line ftp client in server 2008 does not support passive mode so I've used these commands to allow outbound ftp (it stalls without this) 1) Open port 21 on the firewall netsh advfirewall firewall add rule name="FTP (no SSL)" action=allow protocol=TCP dir=in localport=21 2) Activate firewall application filter for FTP (aka Stateful FTP) that will dynamically open ports for data connections netsh advfirewall set global StatefulFtp enable however in server 2008 r2, these commands seem to work, but it does not affect the outbound ftp, it stalls I do not want to use an alt client

    Read the article

  • Install PHP 5.1.2, Requires: libcurl.so.3()(64bit) error

    - by Scott Rowley
    I'm trying to install php 5.1.2 on a CentOS 6 server (for grandfathering in old websites). I downloaded an RPM file ( php-5.1.2-5.x86_64.rpm ), but when I use: yum install php-5.1.2-5.x86_64.rpm I get the following error: Error: Package: php-5.1.2-5.x86_64 (/php-5.1.2-5.x86_64) Requires: libcurl.so.3()(64bit) I have tried several things including the following: ln -s /usr/lib64/libcurl.so.4 /usr/lib64/libcurl.so.3 (To make it symlink to the newer version) Downloaded curl-7.15.5-2.1.el5_3.5.x86_64.rpm and took the libcurl.so.3 out of the rpm and placed it in /usr/lib64/libcurl.so.3 with the same permissions as libcurl.so.4. Nothing has worked. Any ideas?

    Read the article

  • Log shipping on select tables.

    - by Scott Chamberlain
    I know I am most likely using incorrect terminology so please correct me if I use the wrong terms so I can search better. We have a very large database at a client's site and we would like to have up to date copies of some of the tables sent across the internet to our servers at our office. We would like to only copy a few of the tables because the bandwidth requirement to do log shipping of the entire database (our current solution) is too high. Also replication directly to our servers is out of the question as our servers are not accessible from the internet and management does not want to do replication (more on that later). One possible Idea we had is to do some form of replication on the tables we need to another database on the same server and do log shipping of that second smaller database but management is concerned that the clients have broken replication (it was between two servers on their internal network however) on us in the past and would like to stay away from it if possible. Any recommendations would be greatly appreciated. If using some form of replication is the only solution, I am not against replication, I just need compelling arguments to convince management to do it. This is to be set up on multiple sites that are running either Sql2005 or Sql2008 we will have both versions on our end to restore the data to so that is not a issue. Thank you.

    Read the article

  • Run a script on user connection on the VM host

    - by Scott Chamberlain
    I have a server running a Virtual Desktop Managed Pool, what I would like to do is when a user logs in I would like a script to check the number of available VMs and if below a threashold add additional VMs to the pool. The script to check the load and add to the pool is not the problem, I have that already figured out: $collectionName = "Test1"; $rdvh = "vmHost.example.com"; $minAvailableVMs = 2; Import-Module RemoteDesktop; $pool = Get-VirtualDesktopCollection -CollectionName $collectionName; $availableVMs = $pool.Size - ($pool.Size * $pool.PercentInUse / 100); $status = Get-VirtualDesktopCollectionJobStatus $collectionName #only add new servers if we are below the threashold and in the JOB_COMPLETEED state if($availableVMs -lt $minAvailableVMs -and $status.Status -eq [Microsoft.RemoteDesktopServices.Management.VirtualDesktopCollectionJobStatus]::JOB_COMPLETED) { Add-RDVirtualDesktopToCollection -CollectionName $collectionName -VirtualDesktopAllocation @{"$rdvh" = 1} } The problem I am having is, how do I run the above script on the Virtualization Host/Connection Broker/Some other server when a user connects?. I don't think it would be appropriate to run this as a logon script inside the VM, I think there is a way to do this on the management side but I don't know the new scripting interface in Server 2012 R2 well enough to know which commandlets I should look for to schedule this. EDIT: I know System Center is perfect for this but I do not have a license and was denied when I asked for it to be added to the budget.

    Read the article

  • Local dedicated hosting space (own hardware)

    - by Scott
    Where can I find local dedicated hosting space for my own hardware? I know I can rent dedicated hosting from various companies online, but usually I think that means I'm renting their hardware too. I just need a space with a network connection and a power outlet. That's it. How much would this cost? What would I search for? Is it available easily? Or would it only be the sort of thing huge companies would do? I'm in the greater NYC area. It's for a project I'm working on, but the thing's loud and annoying. I'd be willing to pay a little to get it out of sight and out of mind. I don't even care too much about the quality of the network connection. I'd rather not rent other people's hardware cause it probably would cost a fortune to rent a machine like this (tons of ram).

    Read the article

  • Why would searching in Websphere Portal Administration exclude some results?

    - by Scott Leis
    I have logged into a website based on Websphere Portal 6.0, gone to the Administration console, then to Portlet Management - Portlets. At a guess, there are about 200 portlets on this server. 22 portlets have a title starting with "IGM", but if I use the "Title starts with" search option and enter "igm" (or any case variation), only one of these portlets is found. The portlets excluded from the "Title starts with" search are also excluded from the "Title contains" search, but some of them can be found with the "Unique name contains" search (noting that only 5 of these have a unique name). Why would title searches exclude these portlets? I also see similar behaviour in other areas of the Portal administration. E.g. going to Portal Settings - Custom Unique Names - Pages, and performing title searches excludes some results, depending on the search terms entered.

    Read the article

  • User-unique .vimrc file for servers as root user

    - by Scott
    I'm getting thrown into an IDE war at the office, where multiple users have root access on our servers, and like to have everything their own way with VIM. Unfortunately, we have our servers locked down enough to where if you want to do anything, you need to have root access. Obviously (although this is obviously frowned upon), we get tired of typing sudo before each command we type, which would require that we constantly type in our wonderfully complex passwords that are mandated on us over and over again, so naturally we all just execute the sudo su - command upon login to avoid all of this. Of course, when it comes to VIM and custom .vimrc files, we are often times stepping on someone else's custom .vimrc file, and we have some whacked out functionality in these files that users have that may overwrite functionality that we have no idea about, much less have the patience to learn either. When as root on a linux box, is there any way for all of us to still maintain our .vimrc file without having to overwrite the file over and over again every time someone wants to use VIM? Ideally, we have many virtual machines all with VIM installed, so a universal solution across all servers would be best, and we do have our Microsoft Windows user specific home directories mounted on the servers under /home/username. Any recommendations for accommodating this?

    Read the article

  • Two users using the same same user profile while not in a domain.

    - by Scott Chamberlain
    I have a windows server 2003 acting as a terminal server, this computer is not a member of any domain. We demo our product on the server by creating a user account. The person logs in uses the demo for a few weeks and when they are done we delete the user account. However every time we do this it creates a new folder in C:\Documents and Settings\. I know with domains you can have many users point at one profile and make it read only so all changes are dumped afterwords, but is there a way to do that when the machine is not on a domain? I would really like it if I didn't have to remote in and clean up the folders every time.

    Read the article

  • Postgres pgpass windows - not working

    - by Scott
    DB: Postgres 9.0 Client: Windows 7 Server Windows 2008, 64bit I'm trying to connect remotely to a postgres instance for purposes of performing a pg_dump to my local machine. Everything works from my client machine, except that I need to provide a password at the password prompt, and I'd ultimately like to batch this with a script. I've followed the instructions here: http://www.postgresql.org/docs/current/static/libpq-pgpass.html but it's not working. To recap, I've created a file on the client (and tried the server as well): C:/Users/postgres/AppData/postgresql/pgpass.conf, where postgresql is the db user. The file has one line with the following data: *:5432:*postgres:[mypassword] (also tried explicit ip/dbname values, all asterisks, and every combination in between. (I've also tried replacing each '*' with [localhost|myip] and [mydatabasename] respectively. From my client machine, I connect using: pg_dump -h [myip] -U postgres -w [mydbname] [mylocaldumpfile] I'm presuming that I need to provide the '-w' switch in order to ignore password prompt, at which point it should look in the AppData directory on the server. It just comes back with "connection to database failed: fe_sendauth: no password supplied. Any insights are appreciated. As a hack workaround, if there was a way I could tell the windows batch file on my client machine to inject the password at the postgres prompt, that would work as well. Thanks.

    Read the article

  • How to add "most recent emails from this user" to Gmail inbox as a sidebar

    - by Scott B
    I use and love gmail. However, since i use email for customer support, I'm always doing a cross reference lookup via the search feature to see my past conversations with the person whose email I'm reading. I'd love to have a right sidebar widget that shows me, for any email I choose to read, the list of previous conversations/emails with that person. Is this possible? I'm using Chrome Ideally, this sidebar would bump or replace the contextual ads that now display over there.

    Read the article

  • VMWare Workstation 8 Disk I/O & Hard Faults

    - by Scott
    I have VMWare Workstation 8 installed on a host machine with the following specs: Intel i5 2500k CPU 16GB DDR3 1600 ram 1TB Western Digital Caviar Black HD I have two Windows 7 virtual machines configured (currently running one at a time but will be operating both at once when my 32GB RAM kit arrives in a couple days). Each one is configured with 8GB of RAM and no tweaks/performance customizations or anything done. All of the VMWare settings are the defaults. When I boot into these machines and run various programs (Visual Studio, Outlook, etc), I can hear the disk thrashing quite a bit and checking Resource Monitor, I can see that I'm getting anywhere between 300-800 hard faults per second. From the host machine, it shows they're coming from the VMWare image. If I go to the virtual machine, whatever app I'm currently loading is the image that's causing the hard faults. As I understand it, hard faults are (simply) when an address in memory has been swapped out to the page file and has to be read from the page file instead of from memory. I don't understand why this is happening though. With 8GB of ram on the guest machine and 6.5GB available, what could be causing this? I know Windows 7 supposedly improved on page file management over XP but it seems excessive for this kind of slowdown, disk thrashing and high hard fault count when I have that much free RAM. Is there anything I can to to improve the performance in my guest machines? On the host machine, I can open/run any applications at all and hard faults stays around 0 with low disk I/O.

    Read the article

  • then an error occurred during the login process - Connection Error 233

    - by scott brunner
    We have SQL Server 2008 installed on 64Bit Windows Server 2003. When we try connect to the local SQL Server using SQL Server Management Studio at the console, we get the error: A connection was successfully established with the server, but then an error occurred during the login process. provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe. When we try TCP from same local SSMS to local server, we get the same error but intead of the pipe message its something like "connection forcibly closed". Now, here is the strange part - we CAN connect to this SQL Server from any other machine on the network using SSMS. - AND - WE CAN'T connect to ANY SQL Server from the problem server. So it seems the SQL Server instance is fine and accepting remote connections. However, the SSMS on that machine will not connect to any SQL Server even remotely. When we try an ADO.NET connection from C# remotely we can connect, run that same code on the console of the trouble server and we get the same errors. How can this be solved?

    Read the article

  • Two users using the same same user profile while not in a domain.

    - by Scott Chamberlain
    I have a windows server 2003 acting as a terminal server, this computer is not a member of any domain. We demo our product on the server by creating a user account. The person logs in uses the demo for a few weeks and when they are done we delete the user account. However every time we do this it creates a new folder in C:\Documents and Settings\. I know with domains you can have many users point at one profile and make it read only so all changes are dumped afterwords, but is there a way to do that when the machine is not on a domain? I would really like it if I didn't have to remote in and clean up the folders every time.

    Read the article

  • load balancing two web servers each on two different isp's?

    - by Scott
    I have two ISP's that provide me hosting via apache / php / mysql. I am running drupal on them. On occasion the mysql server will go away (crash), so I was hoping to find a reasonable way to have a fail over, if server A SQL is down, all traffic is sent to server B. I know traditionally this is handled in DNS where a second alternate ip is given if there is a problem - or similar. But I do not have control over the isp, other than I can run php, perl and the usual apache stuff. Also, I have static ip's on each isp, and I can create dns entries (A/CNAME/TXT). So, I was hoping there might be a way for me to have a script that checks if drupal has a problem, and if so, somehow alter dns, or ? Or, any other ideas? (other than spending lots more $ on a better isp)

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >