Search Results

Search found 449 results on 18 pages for 'shrink'.

Page 17/18 | < Previous Page | 13 14 15 16 17 18  | Next Page >

• Lenovo Windows 8 EFI restore from image

  - by anderhil

  First time here. I have bought e530 with windows 8 and the first hour of work with it i have a problem. I have ssd with windows 7 which i want to use with my new e530. I have made a sysprep of win 7 and installed ssd to the e530. The HDD which was inside e530 i want to use as second hdd instead of my DVD Drive. I connected this HDD through usb-to-sata adapter to copy some files from ssd to the hdd. Unfortunately it didn't see the file system on the HDD (but first time i have booted to it and first boot into Windows 8) I've made some mistakes and i corrupt the filesystem on the hdd. I tried bunch of tricks to recover the GPT, but it didn't work. I have managed to recover the Lenovo_Recovery partition to my ssd using recovery tools. And now I'm stuck, with this new things to me - EFI, GPT, etc i don't how this stuff works, and i have been trying to understand this for hours - but nothing seems to work. I want to restore the Windows 8 to the hdd, so it is there alive. What i have done so far: Formated the HDD I took the PBRALL file from the Lenovo_Recovery " convert gpt create partition Primary size=1000 ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC gpt attributes=0x8000000000000001 assign letter=W format quick LABEL=WINRE_DRV create partition efi size=260 assign letter=s format quick fs=fat32 LABEL=SYSTEM_DRV create par msr size=128 create partition primary noerr assign letter=t format quick LABEL=Windows8_OS shrink desired=12197 create partition Primary ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC gpt attributes=0x8000000000000001 assign letter=q format quick LABEL=Lenovo_Recovery " it recreated the partitions copied contents of SDRIVE.zip to SYSTEM_DRV partition copied contents of WDRIVE.zip to WINRE_DRV partition Copied restored Lenovo_Recovery back to Lenovo_Recovery partition So now I have 3 system partitions: SYSTE_DRV BOOT boot.sdi EFI BOOT bootx64.efi LenovoBT.efi Lenovo ... Microsoft ... WINRE_DRV\Recovery\WindowsRE\winre.wim Lenovo_Recovery (whic contains install.wim and bunch of other things) So i put back the HDD inside the laptop and tried to boot - but nothing works. It just doesn't boot to anything - no errors - nothing at all. When I choose this HDD manually for boot - just black screen blinks and that's all - it returns back to the devices boot menu. SYSTEM_DRV is EFI partition, so I don't understand why it doesn't boot, it has files needed inside. Can anybody tell me what should be done to make it boot to recovery console or smth like that? How to restore the Windows 8 from the Lenovo_Recovery install.wim image? As I understand I have all the files where they should be, but why it doesn't work? How to troubleshoot such things? Also, if somebody has good link where EFI booting process is explained in details that would be great. Cause i still don't understand how it knows what partition to boot?

  Read the article

• March 21st Links: ASP.NET, ASP.NET MVC, AJAX, Visual Studio, Silverlight

  - by ScottGu

  Here is the latest in my link-listing series. If you haven’t already, check out this month’s "Find a Hoster” page on the www.asp.net website to learn about great (and very inexpensive) ASP.NET hosting offers.  [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET URL Routing in ASP.NET 4: Scott Mitchell has a nice article that talks about the new URL routing features coming to Web Forms applications with ASP.NET 4.  Also check out my previous blog post on this topic. Control of Web Control ClientID Values in ASP.NET 4: Scott Mitchell has a nice article that describes how it is now easy to control the client “id” value emitted by server controls with ASP.NET 4. Web Deployment Made Awesome: Very nice MIX10 talk by Scott Hanselman on the new web deployment features coming with VS 2010, MSDeploy, and .NET 4.  Makes deploying web applications much, much easier. ASP.NET 4’s Browser Capabilities Support: Nice blog post by Stephen Walther that talks about the new browser definition capabilities support coming with ASP.NET 4. Integrating Twitter into an ASP.NET Website: Nice article by Scott Mitchell that demonstrates how to call and integrate Twitter from within your ASP.NET applications. Improving CSS with .LESS: Nice article by Scott Mitchell that describes how to optimize CSS using .LESS – a free, open source library. ASP.NET MVC Upgrading ASP.NET MVC 1 applications to ASP.NET MVC 2: Eilon Lipton from the ASP.NET team has a nice post that describes how to easily upgrade your ASP.NET MVC 1 applications to ASP.NET MVC 2.  He has an automated tool that makes this easy. Note that automated MVC upgrade support is also built-into VS 2010.  Use the tool in this blog post for updating existing MVC projects using VS 2008. Advanced ASP.NET MVC 2: Nice video talk by Brad Wilson of the ASP.NET MVC team.  In it he describes some of the more advanced features in ASP.NET MVC 2 and how to maximize your productivity with them. Dynamic Select Lists with ASP.NET MVC and jQuery: Michael Ceranski has a nice blog post that describes how to dynamically populate dropdownlists on the client using AJAX. AJAX Microsoft AJAX Minifier: We recently shipped an updated minifier utility that allows you to shrink/minify both JavaScript and CSS files – which can improve the performance of your web applications.  You can run this either manually as a command-line tool or now automatically integrate it using a Visual Studio build task.  You can download it for free here. Visual Studio VS 2010 Tip: Quickly Closing Documents: Nice blog post that describes some techniques for optimizing how windows are closed with the new VS 2010 IDE. Collpase to Definitions with Outlining: Nice tip from Zain on how to collapse your code editor to outline mode using Ctrl + M, Ctrl + O.  Also check out his post on copy/paste with outlining here. $299 VS 2010 Upgrade Offer for VS 2005/2008 Standard Users: Soma blogs about a nice VS 2010 upgrade offer you can take advantage of if you have VS 2005 or VS 2008 Standard editions.  For $299 you can upgrade to VS 2010 Professional edition. Dependency Graphics: Jason Zander (who runs the VS team) has a nice blog post that covers the new dependency graph support within VS 2010.  This makes it easier to visualize the dependencies within your application.  Also check out this video here. Layer Validation: Jason Zander has a nice blog post that talks about the new layer validation features in VS 2010.  This enables you to enforce cleaner layering within your projects and solutions.  VS 2010 Profiler Blog: The VS 2010 Profiler Team has their own blog and on it you can find a bunch of nice posts from the last few months that talk about a lot of the new features coming with VS 2010’s Profiler support.  Some really nice features coming. Silverlight Silverlight 4 Training Course: Nice free set of training courses from Microsoft that can help bring you up to speed on all of the new Silverlight 4 features and how to build applications with them.  Updated and current with the recently released Silverlight 4 RC build and tools. Getting Started with Silverlight and Windows Phone 7 Development: Nice blog post by Tim Heuer that summarizes how to get started building Windows Phone 7 applications using Silverlight.  Also check out my blog post from last week on how to build a Windows Phone 7 Twitter application using Silverlight. A Guide to What Has Changed with the Silverlight 4 RC: Nice summary post by Tim Heuer that describes all of the things that have changed between the Silverlight 4 Beta and the Silverlight 4 RC. Path Based Layout - Part 1 and Part 2: Christian Schormann has a nice blog post about a really cool new feature in Expression Blend 4 and Silverlight 4 called Path Layout. Also check out Andy Beaulieu’s blog post on this. Hope this helps, Scott

  Read the article

• Windows Workflow Foundation (WF) and things I wish were more intuitive

  - by pjohnson

  I've started using Windows Workflow Foundation, and so far ran into a few things that aren't incredibly obvious. Microsoft did a good job of providing a ton of samples, which is handy because you need them to get anywhere with WF. The docs are thin, so I've been bouncing between samples and downloadable labs to figure out how to implement various activities in a workflow. Code separation or not? You can create a workflow and activity in Visual Studio with or without code separation, i.e. just a .cs "Component" style object with a Designer.cs file, or a .xoml XML markup file with code behind (beside?) it. Absence any obvious advantage to one or the other, I used code separation for workflows and any complex custom activities, and without code separation for custom activities that just inherit from the Activity class and thus don't have anything special in the designer. So far, so good. Workflow Activity Library project type - What's the point of this separate project type? So far I don't see much advantage to keeping your custom activities in a separate project. I prefer to have as few projects as needed (and no fewer). The Designer's Toolbox window seems to find your custom activities just fine no matter where they are, and the debugging experience doesn't seem to be any different. Designer Properties - This is about the designer, and not specific to WF, but nevertheless something that's hindered me a lot more in WF than in Windows Forms or elsewhere. The Properties window does a good job of showing you property values when you hover the mouse over the values. But they don't do the same to find out what a control's type is. So maybe if I named all my activities "x1" and "x2" instead of helpful self-documenting names like "listenForStatusUpdate", then I could easily see enough of the type to determine what it is, but any names longer than those and all I get of the type is "System.Workflow.Act" or "System.Workflow.Compone". Even hitting the dropdown doesn't expand any wider, like the debugger quick watch "smart tag" popups do when you scroll through members. The only way I've found around this in VS 2008 is to widen the Properties dialog, losing precious designer real estate, then shrink it back down when you're done to see what you were doing. Really? WF Designer - This is about the designer, and I believe is specific to WF. I should be able to edit the XML in a .xoml file, or drag and drop using the designer. With WPF (at least in VS 2010 Ultimate), these are side by side, and changes to one instantly update the other. With WF, I have to right-click on the .xoml file, choose Open With, and pick XML Editor to edit the text. It looks like this is one way where WF didn't get the same attention WPF got during .NET Fx 3.0 development. Service - In the WF world, this is simply a class that talks to the workflow about things outside the workflow, not to be confused with how the term "service" is used in every other context I've seen in the Windows and .NET world, i.e. an executable that waits for events or requests from a client and services them (Windows service, web service, WCF service, etc.). ListenActivity - Such a great concept, yet so unintuitive. It seems you need at least two branches (EventDrivenActivity instances), one for your positive condition and one for a timeout. The positive condition has a HandleExternalEventActivity, and the timeout has a DelayActivity followed by however you want to handle the delay, e.g. a ThrowActivity. The timeout is simple enough; wiring up the HandleExternalEventActivity is where things get fun. You need to create a service (see above), and an interface for that service (this seems more complex than should be necessary--why not have activities just wire to a service directly?). And you need to create a custom EventArgs class that inherits from ExternalDataEventArgs--you can't create an ExternalDataEventArgs event handler directly, even if you don't need to add any more information to the event args, despite ExternalDataEventArgs not being marked as an abstract class, nor a compiler error nor warning nor any other indication that you're doing something wrong, until you run it and find that it always times out and get to check every place mentioned here to see why. Your interface and service need an event that consumes your custom EventArgs class, and a method to fire that event. You need to call that method from somewhere. Then you get to hope that you did everything just right, or that you can step through code in the debugger before your Delay timeout expires. Yes, it's as much fun as it sounds. TransactionScopeActivity - I had the bright idea of putting one in as a placeholder, then filling in the database updates later. That caused this error: The workflow hosting environment does not have a persistence service as required by an operation on the workflow instance "[GUID]". ...which is about as helpful as "Object reference not set to an instance of an object" and even more fun to debug. Google led me to this Microsoft Forums hit, and from there I figured out it didn't like that the activity had no children. Again, a Validator on TransactionScopeActivity would have pointed this out to me at design time, rather than handing me a nearly useless error at runtime. Easily enough, I disabled the activity and that fixed it. I still see huge potential in my work where WF could make things easier and more flexible, but there are some seriously rough edges at the moment. Maybe I'm just spoiled by how much easier and more intuitive development elsewhere in the .NET Framework is.

  Read the article

• Web Site Performance and Assembly Versioning – Part 2 Versioning Combined Files Using Subversion

  - by capgpilk

  Ok so it took a while to post this second part. Many apologies, we had a big roll out of a new platform at work and many things had to get sidelined. So this is the second part in a short series of website performance and using versioning to help improve it. Minification and Concatination of JavaScript and CSS Files Versioning Combined Files Using Subversion – this post Versioning Combined Files Using Mercurial – published shortly In the previous post we used AjaxMin to shrink js and css files then concatenated them into one file each which had the file name of site-script.combined.min.js and site-style.combined.min.css. These file names are fine, but you can configure IIS 7 to cache these static files and so lower the amount of data transferred between server and client. This is done by editing the response headers in IIS. 1. In IIS7 Manager, choose the directory where these files are located and select HTTP Response Headers. 2. Check the Expire Web Content and set a time period well into the future. 3. When refreshing the web page, the server will respond with HTTP 304 forcing the browser to retrieve the file from its cache. 4. As can be seen in FireBug, the Cache-Control header has a max age of 31536000 seconds which equates to 365 days.   The server will always send this HTTP 304 message unless the file changes forcing it to send new content. To help force this we can change the file name based on the latest build using the SVN revision number in the filename. So we have lowered data transfer on content that hasn’t changed, but forced it to be sent when you have made a change to the css or js files. Now to get the SVN revision number in to the file name. 1. Import the MSBuildCommunityTasks targets which can be dowloaded from here. 1: <Import Project="$(MSBuildExtensionsPath) 2: \MSBuildCommunityTasks 3: \MSBuild.Community.Tasks.Targets" /> 2. Edit the BeforeBuild target to call out to svn and get the latest revision 1: <SvnVersion LocalPath="$(MSBuildProjectDirectory)" 2: ToolPath="$(ProgramFiles)\VisualSVN Server\bin"> 3: <Output TaskParameter="Revision" PropertyName="Revision" /> 4: </SvnVersion> 3. Set it to update the project AssemblyInfo.cs file for the svn revision. 1: <FileUpdate Files="Properties\AssemblyInfo.cs" 2: Regex="(\d+)\.(\d+)\.(\d+)\.(\d+)" 3: ReplacementText="$1.$2.$3.$(Revision)" /> 4. Now edit the AfterBuild target to get the full dll version. You could combine these two steps and just get the version from svn, I am working on one project that updates the AssemblyInfo file and another project that allows manual editing of the file, but needs that version within the file name; so I just combined the two for this post. 1: <MSBuild.ExtensionPack.Framework.Assembly 2: TaskAction="GetInfo" 3: NetAssembly="$(OutputPath)\mydll.dll"> 4: <Output TaskParameter="OutputItems" ItemName="Info" /> 5: </MSBuild.ExtensionPack.Framework.Assembly> 6: <Message Text="Version: %(Info.AssemblyVersion)" 7: Importance="High" /> 5. Use this Info.AssemblyVersion to write out the combined css and js files as described in the last post. 1: <WriteLinestoFile File="Scripts\site-%(Info.AssemblyVersion).combined.min.js" 2: Lines="@(JSLinesSite)" Overwrite="true" />   In the next post I will cover doing the same, but for a Mercurial repository.

  Read the article

• Using Hadooop (HDInsight) with Microsoft - Two (OK, Three) Options

  - by BuckWoody

  Microsoft has many tools for “Big Data”. In fact, you need many tools – there’s no product called “Big Data Solution” in a shrink-wrapped box – if you find one, you probably shouldn’t buy it. It’s tempting to want a single tool that handles everything in a problem domain, but with large, complex data, that isn’t a reality. You’ll mix and match several systems, open and closed source, to solve a given problem. But there are tools that help with handling data at large, complex scales. Normally the best way to do this is to break up the data into parts, and then put the calculation engines for that chunk of data right on the node where the data is stored. These systems are in a family called “Distributed File and Compute”. Microsoft has a couple of these, including the High Performance Computing edition of Windows Server. Recently we partnered with Hortonworks to bring the Apache Foundation’s release of Hadoop to Windows. And as it turns out, there are actually two (technically three) ways you can use it. (There’s a more detailed set of information here: http://www.microsoft.com/sqlserver/en/us/solutions-technologies/business-intelligence/big-data.aspx, I’ll cover the options at a general level below)  First Option: Windows Azure HDInsight Service  Your first option is that you can simply log on to a Hadoop control node and begin to run Pig or Hive statements against data that you have stored in Windows Azure. There’s nothing to set up (although you can configure things where needed), and you can send the commands, get the output of the job(s), and stop using the service when you are done – and repeat the process later if you wish. (There are also connectors to run jobs from Microsoft Excel, but that’s another post)   This option is useful when you have a periodic burst of work for a Hadoop workload, or the data collection has been happening into Windows Azure storage anyway. That might be from a web application, the logs from a web application, telemetrics (remote sensor input), and other modes of constant collection.   You can read more about this option here:  http://blogs.msdn.com/b/windowsazure/archive/2012/10/24/getting-started-with-windows-azure-hdinsight-service.aspx Second Option: Microsoft HDInsight Server Your second option is to use the Hadoop Distribution for on-premises Windows called Microsoft HDInsight Server. You set up the Name Node(s), Job Tracker(s), and Data Node(s), among other components, and you have control over the entire ecostructure.   This option is useful if you want to  have complete control over the system, leave it running all the time, or you have a huge quantity of data that you have to bulk-load constantly – something that isn’t going to be practical with a network transfer or disk-mailing scheme. You can read more about this option here: http://www.microsoft.com/sqlserver/en/us/solutions-technologies/business-intelligence/big-data.aspx Third Option (unsupported): Installation on Windows Azure Virtual Machines  Although unsupported, you could simply use a Windows Azure Virtual Machine (we support both Windows and Linux servers) and install Hadoop yourself – it’s open-source, so there’s nothing preventing you from doing that.   Aside from being unsupported, there are other issues you’ll run into with this approach – primarily involving performance and the amount of configuration you’ll need to do to access the data nodes properly. But for a single-node installation (where all components run on one system) such as learning, demos, training and the like, this isn’t a bad option. Did I mention that’s unsupported? :) You can learn more about Windows Azure Virtual Machines here: http://www.windowsazure.com/en-us/home/scenarios/virtual-machines/ And more about Hadoop and the installation/configuration (on Linux) here: http://en.wikipedia.org/wiki/Apache_Hadoop And more about the HDInsight installation here: http://www.microsoft.com/web/gallery/install.aspx?appid=HDINSIGHT-PREVIEW Choosing the right option Since you have two or three routes you can go, the best thing to do is evaluate the need you have, and place the workload where it makes the most sense.  My suggestion is to install the HDInsight Server locally on a test system, and play around with it. Read up on the best ways to use Hadoop for a given workload, understand the parts, write a little Pig and Hive, and get your feet wet. Then sign up for a test account on HDInsight Service, and see how that leverages what you know. If you're a true tinkerer, go ahead and try the VM route as well. Oh - there’s another great reference on the Windows Azure HDInsight that just came out, here: http://blogs.msdn.com/b/brunoterkaly/archive/2012/11/16/hadoop-on-azure-introduction.aspx  

  Read the article

• Easing the Journey to the Private Cloud with Oracle Consulting

  - by MichaelM-Oracle

  By Sanjai Marimadaiah, Senior Director, Strategy & Business Development – Cloud Solutions, Oracle Consulting Services Business leaders are now leading the charge on how their firms can profit from cloud solutions. Agility and innovation are becoming the primary drivers of the business case for the cloud, even more than the anticipated cost savings. Leaders need to find the right strategy and optimize the use of cloud-based applications across their enterprise-computing infrastructure. The Problem – Current State With prevalent IT practices, many organizations find that they run multiple IT solutions serving similar business needs. This has led to the proliferation of technology stacks, for example: Oracle 10g on Sun T4 running Solaris 9; Oracle 11g on Exadata running Linux; or Oracle 12c on commodity x86 servers. This variance has a huge impact on an organization’s agility and expenses, and requires IT professionals with varied skills as well as on-going training for different systems and tools. Fortunately there is a practical business strategy to overcome this unneeded redundancy. Thus begins a journey to the right cloud computing solution. The Solution – Cloud Services from Oracle Consulting Services (OCS) Oracle Consulting Services (OCS ) works closely with our clients as trusted advisors to proactively respond to business needs and IT concerns. OCS understands that making the transition to cloud solutions begins with a strategic conversation, based on its deep expertise for successfully completing private cloud service engagements with several companies. For a journey to the cloud, Oracle Consulting Services leads the client through four phases– standardization, consolidation, service delivery, and enterprise cloud – to achieve optimal returns. Phase 1 - Standardization Oracle Consulting Services (OCS) works with clients to evaluate their business requirements and propose a set of standard solutions stacks for various IT solutions. This is an opportune time to evaluate cloud ready solutions, such as Oracle 12c, Oracle Exadata, and the Oracle Database Appliance (ODA). The OCS consultants, together with the delivery team, then turn to upgrading and migrating existing solution stacks to standardized offerings. OCS has the expertise and tools to complete this stage in a fraction of the time required by other IT services companies. Clients quickly realize cost savings in tools, processes, and type/number of resources required. This standardization also improves agility of the IT organizations and their abilities to respond to the needs of various business units. Phase 2 - Consolidation During the consolidation phase, OCS consultants programmatically consolidate hundreds of databases into a smaller number of servers to improve utilization, reduce floor space, and optimize maintenance costs. Consolidation helps clients realize huge savings in CapEx investments and shrink OpEx costs. The use of engineered systems, such as Oracle Exadata, greatly reduces the client’s risk of moving to a new solution stack. OCS recommends clients to pursue Phase 1 (Standardization) and Phase 2 (Consolidation) simultaneously to reduce the overall time, effort, and expense of the cloud journey. Phase 3 - Service Delivery Once a client is on a path of standardization and consolidation, OCS consultants create Service Catalogues based on the SLAs requirements and the criticality of the solutions. The number and types of Service Catalogues (Platinum, Gold, Silver, Bronze, etc.) vary from client to client. OCS consultants also implement a variety of value-added cloud solutions, including monitoring, metering, and charge-back solutions. At this stage, clients are able to achieve a high level of understanding in their cloud journey. Their IT organizations are operating efficiently and are more agile in responding to the needs of business units. Phase 4 - Enterprise Cloud In the final phase of the cloud journey, the economics of the IT organizations change. Business units can request services on-demand; applications can be deployed and consumed on a pay-as-you-go model. OCS has the expertise and capabilities to establish processes, programs, and solutions required for IT organizations to transform how they interact with business units. The Promise of Cloud Solutions Depending the size and complexity of their business model, some clients are able to abbreviate some phases of their cloud journey. Cloud solutions are still evolving and there is rapid pace of innovation to transform how IT organizations operate. The lesson is clear. Cloud solutions hold a lot of promise for business agility. Business leaders can now leverage an additional set of capabilities and services. They can ramp up their pace of innovation. With cloud maturity, they can compete more effectively in their respective markets. But there are certainly challenges ahead. A skilled consulting services partner can play a pivotal role as a trusted advisor in the successful adoption of cloud solutions. Oracle Consulting Services has expertise and a portfolio of services to help clients succeed on their journey to the cloud.

  Read the article

• #OOW 2012 @PARIS...talking Oracle and Clouds, and Optimized Datacenter

  - by Eric Bezille

  For those of you who want to get most out of Oracle technologies to evolve your IT to the Next Wave, I encourage you to register to the up coming Oracle Optimized Datacenter event that will take place in Paris on November 28th. You will get the opportunity to exchange with Oracle experts and customers having successfully evolve their IT by leveraging Oracle technologies. You will also get the latest news on some of the Oracle systems announcements made during OOW 2012. During this event we will make an update about Oracle and Clouds, from private to public and hybrid models. So in preparing this session, I thought it was a good start to make a status of Cloud Computing in France, and CIO requirements in particular. Starting in 2009 with the first Cloud Camp in Paris, the market has evolved, but the basics are still the same : think hybrid. From Traditional IT to Clouds One size doesn't fit all, and for big companies having already an IT in place, there will be parts eligible to external (public) cloud, and parts that would be required to stay inside the firewalls, so ability to integrate both side is key.  None the less, one of the major impact of Cloud Computing trend on IT, reported by Forrester, is the pressure it makes on CIO to evolve towards the same model that end-users are now used to in their day to day life, where self-service and flexibility are paramount. This is what is driving IT to transform itself toward "a Global Service Provider", or for some as "IT "is" the Business" (see : Gartner Identifies Four Futures for IT and CIO), and for both models toward a Private Cloud Service Provider. In this journey, there is still a big difference between most of existing external Cloud and a firm IT : the number of applications that a CIO has to manage. Most cloud providers today are overly specialized, but at the end of the day, there are really few business processes that rely on only one application. So CIOs has to combine everything together external and internal. And for the internal parts that they will have to make them evolve to a Private Cloud, the scope can be very large. This will often require CIOs to evolve from their traditional approach to more disruptive ones, the time has come to introduce new standards and processes, if they want to succeed. So let's have a look at the different Cloud models, what type of users they are addressing, what value they bring and most importantly what needs to be done by the  Cloud Provider, and what is left over to the user. IaaS, PaaS, SaaS : what's provided and what needs to be done First of all the Cloud Provider will have to provide all the infrastructure needed to deliver the service. And the more value IT will want to provide, the more IT will have to deliver and integrate : from disks to applications. As we can see in the above picture, providing pure IaaS, left a lot to cover for the end-user, that’s why the end-user targeted by this Cloud Service is IT people. If you want to bring more value to developers, you need to provide to them a development platform ready to use, which is what PaaS is standing for, by providing not only the processors power, storage and OS, but also the Database and Middleware platform. SaaS being the last mile of the Cloud, providing an application ready to use by business users, the remaining part for the end-users being configuring and specifying the application for their specific usage. In addition to that, there are common challenges encompassing all type of Cloud Services : Security : covering all aspect, not only of users management but also data flows and data privacy Charge back : measuring what is used and by whom Application management : providing capabilities not only to deploy, but also to upgrade, from OS for IaaS, Database, and Middleware for PaaS, to a full Business Application for SaaS. Scalability : ability to evolve ALL the components of the Cloud Provider stack as needed Availability : ability to cover “always on” requirements Efficiency : providing a infrastructure that leverage shared resources in an efficient way and still comply to SLA (performances, availability, scalability, and ability to evolve) Automation : providing the orchestration of ALL the components in all service life-cycle (deployment, growth & shrink (elasticity), upgrades,...) Management : providing monitoring, configuring and self-service up to the end-users Oracle Strategy and Clouds For CIOs to succeed in their Private Cloud implementation, means that they encompass all those aspects for each component life-cycle that they selected to build their Cloud. That’s where a multi-vendors layered approach comes short in terms of efficiency. That’s the reason why Oracle focus on taking care of all those aspects directly at Engineering level, to truly provide efficient Cloud Services solutions for IaaS, PaaS and SaaS. We are going as far as embedding software functions in hardware (storage, processor level,...) to ensure the best SLA with the highest efficiency. The beauty of it, as we rely on standards, is that the Oracle components that you are running today in-house, are exactly the same that we are using to build Clouds, bringing you flexibility, reversibility and fast path to adoption. With Oracle Engineered Systems (Exadata, Exalogic & SPARC SuperCluster, more specifically, when talking about Cloud), we are delivering all those components hardware and software already engineered together at Oracle factory, with a single pane of glace for the management of ALL the components through Oracle Enterprise Manager, and with high-availability, scalability and ability to evolve by design. To give you a feeling of what does that bring in terms just of implementation project timeline, for example with Oracle SPARC SuperCluster, we have a consistent track of record to have the system plug into existing Datacenter and ready in a week. This includes Oracle Database, OS, virtualization, Database Storage (Exadata Storage Cells in this case), Application Storage, and all network configuration. This strategy enable CIOs to very quickly build Cloud Services, taking out not only the complexity of integrating everything together but also taking out the automation and evolution complexity and cost. I invite you to discuss all those aspect in regards of your particular context face2face on November 28th.

  Read the article

• Data Source Security Part 5

  - by Steve Felts

  If you read through the first four parts of this series on data source security, you should be an expert on this focus area.  There is one more small topic to cover related to WebLogic Resource permissions.  After that comes the test, I mean example, to see with a real set of configuration parameters what the results are with some concrete values. WebLogic Resource Permissions All of the discussion so far has been about database credentials that are (eventually) used on the database side.  WLS has resource credentials to control what WLS users are allowed to access JDBC resources.  These can be defined on the Policies tab on the Security tab associated with the data source.  There are four permissions: “reserve” (get a new connection), “admin”, “shrink”, and reset (plus the all-inclusive “ALL”); we will focus on “reserve” here because we are talking about getting connections.  By default, JDBC resource permissions are completely open – anyone can do anything.  As soon as you add one policy for a permission, then all other users are restricted.  For example, if I add a policy so that “weblogic” can reserve a connection, then all other users will fail to reserve connections unless they are also explicitly added.  The validation is done for WLS user credentials only, not database user credentials.  Configuration of resources in general is described at “Create policies for resource instances” http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/security/CreatePoliciesForResourceInstances.html.  This feature can be very useful to restrict what code and users can get to your database. There are the three use cases: API Use database credentials User for permission checking getConnection() True or false Current WLS user getConnection(user,password) False User/password from API getConnection(user,password) True Current WLS user If a simple getConnection() is used or database credentials are enabled, the current user that is authenticated to the WLS system is checked. If database credentials are not enabled, then the user and password on the API are used. Example The following is an actual example of the interactions between identity-based-connection-pooling-enabled, oracle-proxy-session, and use-database-credentials. On the database side, the following objects are configured.- Database users scott; jdbcqa; jdbcqa3- Permission for proxy: alter user jdbcqa3 grant connect through jdbcqa;- Permission for proxy: alter user jdbcqa grant connect through jdbcqa; The following WebLogic Data Source objects are configured.- Users weblogic, wluser- Credential mapping “weblogic” to “scott”- Credential mapping "wluser" to "jdbcqa3"- Data source descriptor configured with user “jdbcqa”- All tests are run with Set Client ID set to true (more about that below).- All tests are run with oracle-proxy-session set to false (more about that below). The test program:- Runs in servlet- Authenticates to WLS as user “weblogic” Use DB Credentials Identity based getConnection(scott,***) getConnection(weblogic,***) getConnection(jdbcqa3,***) getConnection()  true  true Identity scottClient weblogicProxy null weblogic fails - not a db user User jdbcqa3Client weblogicProxy null Default user jdbcqaClient weblogicProxy null  false  true scott fails - not a WLS user User scottClient scottProxy null jdbcqa3 fails - not a WLS user User scottClient scottProxy null  true  false Proxy for scott fails weblogic fails - not a db user User jdbcqa3Client weblogicProxy jdbcqa Default user jdbcqaClient weblogicProxy null  false  false scott fails - not a WLS user Default user jdbcqaClient scottProxy null jdbcqa3 fails - not a WLS user Default user jdbcqaClient scottProxy null If Set Client ID is set to false, all cases would have Client set to null. If this was not an Oracle thin driver, the one case with the non-null Proxy in the above table would throw an exception because proxy session is only supported, implicitly or explicitly, with the Oracle thin driver. When oracle-proxy-session is set to true, the only cases that will pass (with a proxy of "jdbcqa") are the following.1. Setting use-database-credentials to true and doing getConnection(jdbcqa3,…) or getConnection().2. Setting use-database-credentials to false and doing getConnection(wluser, …) or getConnection(). Summary There are many options to choose from for data source security.  Considerations include the number and volatility of WLS and Database users, the granularity of data access, the depth of the security identity (property on the connection or a real user), performance, coordination of various components in the software stack, and driver capabilities.  Now that you have the big picture (remember that table in part 1), you can make a more informed choice.

  Read the article

• Android RelativeLayout fill_parent unexpected behavior in a ListView with varying row heights

  - by Jameel Al-Aziz

  I'm currently working on a small update to a project and I'm having an issue with Relative_Layout and fill_parent in a list view. I'm trying to insert a divider between two sections in each row, much like the divider in the call log of the default dialer. I checked out the Android source code to see how they did it, but I encountered a problem when replicating their solution. To start, here is my row item layout: <?xml version="1.0" encoding="utf-8"?> <RelativeLayout android:id="@+id/RelativeLayout01" android:layout_width="fill_parent" xmlns:android="http://schemas.android.com/apk/res/android" android:padding="10dip" android:layout_height="fill_parent" android:maxHeight="64dip" android:minHeight="?android:attr/listPreferredItemHeight"> <ImageView android:id="@+id/infoimage" android:layout_width="wrap_content" android:layout_height="wrap_content" android:clickable="true" android:src="@drawable/info_icon_big" android:layout_alignParentRight="true" android:layout_centerVertical="true"/> <View android:id="@+id/divider" android:background="@drawable/divider_vertical_dark" android:layout_marginLeft="11dip" android:layout_toLeftOf="@+id/infoimage" android:layout_width="1px" android:layout_height="fill_parent" android:layout_marginTop="5dip" android:layout_marginBottom="5dip" android:layout_marginRight="4dip"/> <TextView android:id="@+id/TextView01" android:textAppearance="?android:attr/textAppearanceLarge" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_centerVertical="true" android:layout_toRightOf="@+id/ImageView01" android:layout_toLeftOf="@+id/divider" android:gravity="left|center_vertical" android:layout_marginLeft="4dip" android:layout_marginRight="4dip"/> <ImageView android:id="@+id/ImageView01" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignParentLeft="true" android:background="@drawable/bborder" android:layout_centerVertical="true"/> </RelativeLayout> The issue I'm facing is that each row has a thumbnail of varying height (ImageView01). If I set the RelativeLayout's layout_height property to fill_parent, the divider does not scale vertically to fill the row (it just remains a 1px dot). If I set layout_height to "?android:attr/listPreferredItemHeight", the divider fills the row, but the thumbnails shrink. I've done some debugging in the getView() method of the adapter, and it seems that the divider's height is not being set properly once the row has it's proper height. Here is a portion of the getView() method: public View getView(int position, View view, ViewGroup parent) { if (view == null) { view = inflater.inflate(R.layout.tag_list_item, parent, false); } The rest of the method simply sets the appropriate text and images for the row. Also, I create the inflater object in the adapter's constructor with: inflater = LayoutInflater.from(context); Am I missing something essential? Or does fill_parent just not work with dynamic heights?

  Read the article

• Fluid CSS: floating column with max-width and overflow

  - by Ates Goral

  I'm using a fluid layout in the new theme that I'm working on for my blog. I often blog about code and include <pre> blocks within the posts. The float: left column for the content area has a max-width so that the column stops at a certain maximum width and can also be shrunk: +----------+ +------+ | text | | text | | | | | | | | | | | | | | | | | | | | | +----------+ +------+ max shrunk What I want is for the <pre> elements to be wider than the text column so that I can fit 80-character-wrapped code without horizontal scroll bars. But I want the <pre> elements to overflow from the content area, without affecting its fluidity: +----------+ +------+ | text | | text | | | | | +----------+--+ +------+------+ | code | | code | +----------+--+ +------+------+ | | | | +----------+ +------+ max shrunk But, max-width stops being fluid once I insert the overhanging <pre> in there: the width of the column remains at the specified max-width even when I shrink the browser beyond that width. I've reproduced the issue with this bare-minimum scenario: <div style="float: left; max-width: 460px; border: 1px solid red"> <p>Lorem ipsum dolor sit amet, consectetur adipisicing elit</p> <pre style="max-width: 700px; border: 1px solid blue"> function foo() { // Lorem ipsum dolor sit amet, consectetur adipisicing elit } </pre> <p>Lorem ipsum dolor sit amet, consectetur adipisicing elit</p> </div> I noticed that doing either of the following brings back the fluidity: Remove the <pre> (doh...) Remove the float: left The workaround I'm currently using is to insert the <pre> elements into "breaks" in the post column, so that the widths of the post segments and the <pre> segments are managed mutually exclusively: +----------+ +------+ | text | | text | +----------+ +------+ +-------------+ +-------------+ | code | | code | +-------------+ +-------------+ +----------+ +------+ +----------+ +------+ max shrunk But this forces me to insert additional closing and opening <div> elements into the post markup which I'd rather keep semantically pristine. Admittedly, I don't have a full grasp of how the box model works with floats with overflowing content, so I don't understand why the combination of float: left on the container and the <pre> inside it cripple the max-width of the container. I'm observing the same problem on Firefox/Chrome/Safari/Opera. IE6 (the crazy one) seems happy all the time. This also doesn't seem dependent on quirks/standards mode. Update I've done further testing to observe that max-width seems to get ignored when the element has a float: left. I glanced at the W3C box model chapter but couldn't immediately see an explicit mention of this behaviour. Any pointers?

  Read the article

• CGContextDrawPDFPage doesn't seem to persist in CGContext

  - by erichf

  I am trying to access the pixels of a CGContext written to with a PDF, but the bitmap buffer doesn't seem to update. Any help would be appreciated: //Get the reference to our current page pageRef = CGPDFDocumentGetPage(docRef, iCurrentPage); //Start with a media crop, but see if we can shrink to smaller crop CGRect pdfRect1 = CGRectIntegral(CGPDFPageGetBoxRect(pageRef, kCGPDFMediaBox)); CGRect r1 = CGRectIntegral(CGPDFPageGetBoxRect(pageRef, kCGPDFCropBox)); if (!CGRectIsEmpty(r1)) pdfRect1 = r1; int wide = pdfRect1.size.width + pdfRect1.origin.x; int high = pdfRect1.size.height + pdfRect1.origin.y; CGContextRef ctxBuffer = NULL; CGColorSpaceRef colorSpace; UInt8* bitmapData; int bitmapByteCount; int bitmapBytesPerRow; bitmapBytesPerRow = (wide * 4); bitmapByteCount = (bitmapBytesPerRow * high); colorSpace = CGColorSpaceCreateDeviceRGB(); bitmapData = malloc( bitmapByteCount ); if (bitmapData == NULL) { DebugLog (@"Memory not allocated!"); return; } ctxBuffer = CGBitmapContextCreate (bitmapData, wide, high, 8, // bits per component bitmapBytesPerRow, colorSpace, kCGImageAlphaPremultipliedLast | kCGBitmapByteOrder32Big); // if (ctxBuffer== NULL) { free (bitmapData); DebugLog (@"Context not created!"); return; } CGColorSpaceRelease( colorSpace ); //White out the current context CGContextSetRGBFillColor(ctxBuffer, 1.0, 1.0, 1.0, 1.0); CGContextFillRect(ctxBuffer, CGContextGetClipBoundingBox(ctxBuffer)); CGContextDrawPDFPage(ctxBuffer, pageRef); //!!!This displays just fine to the context passed in from - (void)drawLayer:(CALayer *)layer inContext:(CGContextRef)ctx. That is, I can see the PDf page rendered, so we know ctxBuffer was created correctly //However, if I view bitmapData in memory, it only shows as 0xFF (or whatever fill color I use) CGImageRef img = CGBitmapContextCreateImage(ctxBuffer); CGContextDrawImage(ctx, tiledLayer.frame, img); void *data = CGBitmapContextGetData (ctx); for (int i = 0; i < wide; i++) { for (int j = 0; j < high; j++) { //All of the bytes show as 0xFF (or whatever fill color I test with)?! int byteIndex = (j * 4) + i * 4; UInt8 red = bitmapData[byteIndex]; UInt8 green = bitmapData[byteIndex + 1]; UInt8 blue = bitmapData[byteIndex + 2]; UInt8 alpha = m_PixelBuf[byteIndex + 3]; } } I have also tried using CGDataProviderCopyData(CGImageGetDataProvider(img)) & CFDataGetBytePtr, but the results are the same?

  Read the article

• Unable to stretch TableLayout to screen width

  - by Rendrik

  I've tried unsuccessfully for quite a few hours now to simply get a TableLayout to scale to the full screen. I've tried stretchColumns, shrinkColumns, (specifying the column index or using *) you name it. It's almost as if the parent element (TableLayout) is completely ignoring 'android:layout_width="fill_parent"'. I've read through similar questions here, though they haven't solved it for me. The XML below has 3 rows, and the table always shrink wraps to the size of the content. Apparently I'm too new to post pictures(?) Here is the XML rendered into the project i'm working on. http://www.dashiva.com/images/Capture.png What am I missing here, it's quite frustrating! <TableLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent" android:stretchColumns="*"> <TableRow> <TextView android:id="@+id/AmountText" android:text="@string/general_amount" android:paddingRight="8dip" android:layout_gravity="center"></TextView> <TextView android:id="@+id/CardText" android:text="@string/general_card" android:paddingRight="8dip" android:layout_gravity="center"></TextView> <TextView android:text="@string/general_date" android:id="@+id/DateText" android:paddingRight="8dip" android:layout_gravity="center"></TextView> <TextView android:id="@+id/ErrorText" android:text="@string/general_error" android:paddingRight="8dip" android:layout_gravity="center"></TextView> </TableRow> <TableRow> <TextView android:text="Amount here..." android:id="@+id/AmountNum" android:paddingRight="8dip" android:layout_gravity="center"></TextView> <TextView android:id="@+id/CardNum" android:text="Num here..." android:paddingRight="8dip" android:layout_gravity="center"></TextView> <TextView android:text="date here..." android:id="@+id/DateDate" android:paddingRight="8dip" android:layout_gravity="center"></TextView> <TextView android:text="Code here..." android:id="@+id/ErrorCode" android:paddingRight="8dip" android:layout_gravity="center"></TextView> </TableRow> <TableRow> <ImageView android:id="@+id/cc_image" android:src="@drawable/mastercard" android:background="@drawable/row_bg2" android:layout_gravity="center" android:layout_weight="1"></ImageView> <TextView android:id="@+id/ResponseText" android:layout_span="4" android:text="Response text here..." android:textSize="18dip" android:layout_weight="1"></TextView> </TableRow> <ImageView android:layout_gravity="center_vertical" android:background="@drawable/gradient_bg" android:layout_height="3dip" android:layout_width="fill_parent"></ImageView> </TableLayout>

  Read the article

• WPF - Redrawing a Context Menu when Items change?

  - by Rachel

  I have a ItemsControl in a ScrollViewer, and when the items exceed the width of the ScrollViewer they are put into a ContextMenu and shown as a DropDown instead. My problem is that when the Context Menu is first loaded, it saves the saves the size of the Menu and does not redraw when more commands get added/removed. For example, a panel has 3 commands. 1 is visible and 2 are in the Menu. Viewing the menu shows the 2 commands and draws the control, but then if you resize the panel so 2 are visible and only 1 command is in the menu, it doesn't redraw the menu to eliminate that second menu item. Or even worse, if you shrink the panel so that no commands are shown and all 3 are in the Menu, it will only show the top 2. Here's my code: <Button Click="DropDownMenu_Click" ContextMenuOpening="DropDownMenu_ContextMenuOpening"> <Button.ContextMenu> <ContextMenu ItemsSource="{Binding Path=MenuCommands}" Placement="Bottom"> <ContextMenu.Resources> <Style TargetType="{x:Type MenuItem}"> <Setter Property="Command" Value="{Binding Path=Command}" /> <Setter Property="Visibility" Value="{Binding Path=IsVisible, Converter={StaticResource ReverseBooleanToVisibilityConverter}}"/> </Style> </ContextMenu.Resources> <ContextMenu.ItemTemplate> <DataTemplate> <TextBlock Text="{Binding Path=DisplayName}" /> </DataTemplate> </ContextMenu.ItemTemplate> </ContextMenu> </Button.ContextMenu> </Button> Code Behind: void DropDownMenu_ContextMenuOpening(object sender, ContextMenuEventArgs e) { Button b = sender as Button; b.ContextMenu.IsOpen = false; e.Handled = true; } private void DropDownMenu_Click(object sender, RoutedEventArgs e) { Button b = sender as Button; ContextMenu cMenu = b.ContextMenu; if (cMenu != null) { cMenu.PlacementTarget = b; cMenu.Placement = System.Windows.Controls.Primitives.PlacementMode.Bottom; } } I have tried using InvalidateVisual and passing an empty delegate on Render to try and force a redraw, however neither works. I'm using .Net 4.0.

  Read the article

• Modeling distribution of performance measurements

  - by peterchen

  How would you mathematically model the distribution of repeated real life performance measurements - "Real life" meaning you are not just looping over the code in question, but it is just a short snippet within a large application running in a typical user scenario? My experience shows that you usually have a peak around the average execution time that can be modeled adequately with a Gaussian distribution. In addition, there's a "long tail" containing outliers - often with a multiple of the average time. (The behavior is understandable considering the factors contributing to first execution penalty). My goal is to model aggregate values that reasonably reflect this, and can be calculated from aggregate values (like for the Gaussian, calculate mu and sigma from N, sum of values and sum of squares). In other terms, number of repetitions is unlimited, but memory and calculation requirements should be minimized. A normal Gaussian distribution can't model the long tail appropriately and will have the average biased strongly even by a very small percentage of outliers. I am looking for ideas, especially if this has been attempted/analysed before. I've checked various distributions models, and I think I could work out something, but my statistics is rusty and I might end up with an overblown solution. Oh, a complete shrink-wrapped solution would be fine, too ;) Other aspects / ideas: Sometimes you get "two humps" distributions, which would be acceptable in my scenario with a single mu/sigma covering both, but ideally would be identified separately. Extrapolating this, another approach would be a "floating probability density calculation" that uses only a limited buffer and adjusts automatically to the range (due to the long tail, bins may not be spaced evenly) - haven't found anything, but with some assumptions about the distribution it should be possible in principle. Why (since it was asked) - For a complex process we need to make guarantees such as "only 0.1% of runs exceed a limit of 3 seconds, and the average processing time is 2.8 seconds". The performance of an isolated piece of code can be very different from a normal run-time environment involving varying levels of disk and network access, background services, scheduled events that occur within a day, etc. This can be solved trivially by accumulating all data. However, to accumulate this data in production, the data produced needs to be limited. For analysis of isolated pieces of code, a gaussian deviation plus first run penalty is ok. That doesn't work anymore for the distributions found above. [edit] I've already got very good answers (and finally - maybe - some time to work on this). I'm starting a bounty to look for more input / ideas.

  Read the article

• WPF Datagrid zoom issue

  - by David Osborn

  I'm working with the WPF DataGrid from the WPFToolkit and I'm having issues with trying to zoom the entire datagrid. My initial thought was that it was going to be really easy and I would just apply a scale transform to the grid and animate the ScaleX, ScaleY properties when the used clicked a button. This did not work however because the scrollbar was zoomed in making it larger. I need fixed headers and fixed columns on the datagrid so I can't simple use a scrollviewer outside of the datagrid to handle the scrolling. The second thing I tried was to just scale the font size in the grid, but this failed because on shrinking the font size the columns stay at the original width and do not shrink. Finally I thought I had it working by using the below code which goes into the view tree for the datagrid and adds a scale transform to the Scroll Content Presenter. (Also not shown in this code, I apply a transform to the visual tree item for the headers in the same manner so that it scales as well). I thought this was working great until I tested out the horizontal scrolling after zooming. (Vertical scrolling works perfectly.) Before zooming at all the horizontal scrolling is fine, but after zooming, when I scroll horzonitally the display freaks out. It is hard to tell exactly what it is doing, but it sort of looks like the content that is scrolling off the left of the screen is "folding over" and coming back in on the left. Maybe it is just all smashing up on the left side. Does anyone have any ideas how I can get this working, hopefully without throwing out my whole datagrid that is already working quite well otherwise. ScrollContentPresenter sp = (ScrollContentPresenter) VisualTreeHelper.GetChild( VisualTreeHelper.GetChild( VisualTreeHelper.GetChild(VisualTreeHelper.GetChild(dgMatrix, 0), 0), 0),2); ScaleTransform st = new ScaleTransform(1, 1); sp.LayoutTransform = st; DoubleAnimation a = new DoubleAnimation(); a.By = 1.5; a.AutoReverse = false; a.Duration = new Duration(TimeSpan.Parse("0:0:0.25")); st.BeginAnimation(ScaleTransform.ScaleXProperty, a); st.BeginAnimation(ScaleTransform.ScaleYProperty, a);

  Read the article

• Scale background image to wrap content of layout

  - by bjg222

  I have a layout that contains some text fields and has a background image that's displayed at the top of my activity. I'd like the background image to scale to wrap the content (don't care about aspect ratio). However, the image is larger than content, so the layout instead wraps the background image. Here's my original code: <RelativeLayout android:layout_width="fill_parent" android:id="@+id/HeaderList" android:layout_gravity="top" android:layout_height="wrap_content" android:background="@drawable/header"> <TextView android:layout_height="wrap_content" android:layout_width="wrap_content" android:id="@+id/NameText" android:text="Jhn Doe" android:textColor="#FFFFFF" android:textSize="30sp" android:layout_alignParentLeft="true" android:layout_alignParentTop="true" android:paddingLeft="4dp" android:paddingTop="4dp" /> <TextView android:layout_height="wrap_content" android:layout_width="wrap_content" android:textColor="#FFFFFF" android:layout_alignParentLeft="true" android:id="@+id/HoursText" android:text="170 hours" android:textSize="23sp" android:layout_below="@+id/NameText" android:paddingLeft="4dp" /> </RelativeLayout> After searching through some other questions, I found these two: How to wrap content views rather than background drawable? Scale a Drawable or background image? Based on this, I created a FrameLayout w/ an ImageView showing the background. Unfortunately, I still can't get it to work. I want the height of the background image to shrink/expand w/ the size of the text views, but with the FrameLayout, the ImageView fits to the size of it's parent, and I can't find a way to make the parent fit to the size the text view layout. Here's my updated code: <FrameLayout android:layout_width="fill_parent" android:layout_height="wrap_content" > <ImageView android:src="@drawable/header" android:layout_width="fill_parent" android:scaleType="fitXY" android:layout_height="fill_parent" /> <RelativeLayout android:layout_width="fill_parent" android:id="@+id/HeaderList" android:layout_gravity="top" android:layout_height="wrap_content" > <TextView android:layout_height="wrap_content" android:layout_width="wrap_content" android:id="@+id/NameText" android:text="John Doe" android:textColor="#FFFFFF" android:textSize="30sp" android:layout_alignParentLeft="true" android:layout_alignParentTop="true" android:paddingLeft="4dp" android:paddingTop="4dp" /> <TextView android:layout_height="wrap_content" android:layout_width="wrap_content" android:textColor="#FFFFFF" android:layout_alignParentLeft="true" android:id="@+id/HoursText" android:text="170 hours" android:textSize="23sp" android:layout_below="@+id/NameText" android:paddingLeft="4dp" /> </RelativeLayout> </FrameLayout> Does anybody have any suggestions for how best to make an image scale to the size of the contents of some layout? I'm not concerned with the aspect ratio of the image, as it won't matter, I just want it to fill the background. Thanks!

  Read the article

• To detect if the user is closing the IE browser apart from onunload event, as it is triggerred when

  - by AndAars

  hi, After being through numerous forums available on the net for last 5 days, I am still not able to completely track down the browser close event. My requirement is to generate a popup message, when user tries to close the browser. I have called my javascript function on body 'onbeforeunload' event. And I have hardcoded the conditions to check the mouse-coordinates for the red 'X' buton of browser, refresh, File-close or Alt-F4. My code works fine when browser window is Maximized, but fails if we shrink it after a limit. Please help me, if some body has already found the solution to a similar problem. Thank you. Aggregated Responses of OP Ok, just tell me if it is possible to detect if a user has clicked on the Refresh button of the browser. Also, Refresh can be triggered by Right-click - Refresh or Ctrl-R. My requirement is to make a variable false on Refresh. I am just able to do it on F5, but all other ways are still out of my reach. The same would be applied to Back buton. Hi ppl, Thanks for all who replied atleast. I have talked to my seniors regarding this and they have now understood and have compromised with the browser menu buttons. So now my task has become easy. Now, I am using a variable and making it true by default. As, I mentioned earlier I just have to catch the onbeforeunload and popup a message when user tries to leave. The message will not popup when user is navigating to other pages, as I have made the variable as false on all the links of my page using following piece of code: document.onclick = function() { //To check if user is navigating from the page by clicking on a hyperlink. if (event.srcElement.tagName == 'A') blnShowMsg = false; //To not popup the warning message else blnShowMsg = true; //To popup the warning message } In my case still the message is shown when user does Refresh, back or goes to any link in Favorites, etc. Thanks buddy, but I have already gone through that and didn't find much help there too. My seniors are not happy with that solution as putting a flag on evry link of my application is a complicated job and they fear of breaking the application. Any other suggestions would be appreciated. Thanks once again. Is there no one who can think of a solution here!!! where are all the experts???

  Read the article

• File sizing issue in DOS/FAT

  - by Heather

  I've been tasked with writing a data collection program for a Unitech HT630, which runs a proprietary DOS operating system that can run executables compiled for 16-bit MS DOS with some restrictions. I'm using the Digital Mars C/C++ compiler, which is working well thus far. One of the application requirements is that the data file must be human-readable plain text, meaning the file can be imported into Excel or opened by Notepad. I'm using a variable length record format much like CSV that I've successfully implemented using the C standard library file I/O functions. When saving a record, I have to calculate whether the updated record is larger or smaller than the version of the record currently in the data file. If larger, I first shift all records immediately after the current record forward by the size difference calculated before saving the updated record. EOF is extended automatically by the OS to accommodate the extra data. If smaller, I shift all records backwards by my calculated offset. This is working well, however I have found no way to modify the EOF marker or file size to ignore the data after the end of the last record. Most of the time records will grow in size because the data collection program will be filling some of the empty fields with data when saving a record. Records will only shrink in size when a correction is made on an existing entry, or on a normal record save if the descriptive data in the record is longer than what the program reads in memory. In the situation of a shrinking record, after the last record in the file I'm left with whatever data was sitting there before the shift. I have been writing an EOF delimiter into the file after a "shrinking record save" to signal where the end of my records are and space-filling the remaining data, but then I no longer have a clean file until a "growing record save" extends the size of the file over the space-filled area. The truncate() function in unistd.h does not work (I'm now thinking this is for *nix flavors only?). One proposed solution I've seen involves creating a second file and writing all the data you wish to save into that file, and then deleting the original. Since I only have 4MB worth of disk space to use, this works if the file size is less than 2MB minus the size of my program executable and configuration files, but would fail otherwise. It is very likely that when this goes into production, users would end up with a file exceeding 2MB in size. I've looked at Ralph Brown's Interrupt List and the interrupt reference in IBM PC Assembly Language and Programming and I can't seem to find anything to update the file size or similar. Is reducing a file's size without creating a second file even possible in DOS?

  Read the article

• Stretching DIV to 100% height and width of window but not less than 800x600px

  - by El Eme

  I have a page that needs to stretch and resize with with window and I've managed to do that but I need that the "inner div" (#pgContent) stretch if the window is resized to higher dimensions but that it doesn't shrink more than, let's say for example 800 x 600 px. As I have it now it stretches well but it also shrinks more than I want! It's working as I want in width but not in height!? Here's a visual example: My CSS: * { margin: 0; padding: 0; outline: 0; } /*| PAGE LAYOUT |*/ html, body { height: 100%; width: 100%; /*text-align: center;*/ /*IE doesn't ~like this*/ cursor: default; } #pgWrapper { z-index: 1; min-height: 100%; height: auto !important; /*min-height: 600px;*/ /* THIS SHOULD WORK BUT IT DOESN'T */ height: 100%; min-width: 1000px; width: 100%; position: absolute; overflow: hidden; text-align: center; background: #000; } #pgContent { position: absolute; top: 30px; left: 30px; right: 30px; bottom: 50px; overflow: hidden; background: #CCC; } #footWrapper { z-index: 2; height: 50px; min-width: 940px; position: absolute; left: 30px; right: 30px; bottom: 0px; background: #C00; } /*| END PAGE LAYOUT |*/ And the HTML: <body> <div id="pgWrapper"> <div id="pgContent"> This DIV should stretch with window but never lower than for example 800px x 600px!<br /> If window size is lower then scrollbars should appear. </div> </div> <div id="footWrapper"> <div id="footLft"></div> <div id="footRgt"></div> </div> </body> If someone could give me a help on this I would appreciate. Thanks in advance.

  Read the article

• High Load mysql on Debian server

  - by Oleg Abrazhaev

  I have Debian server with 32 gb memory. And there is apache2, memcached and nginx on this server. Memory load always on maximum. Only 500m free. Most memory leak do MySql. Apache only 70 clients configured, other services small memory usage. When mysql use all memory it stops. And nothing works, need mysql reboot. Mysql configured use maximum 24 gb memory. I have hight weight InnoDB bases. (400000 rows, 30 gb). And on server multithread daemon, that makes many inserts in this tables, thats why InnoDB. There is my mysql config. [mysqld] # # * Basic Settings # default-time-zone = "+04:00" user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking default-time-zone='Europe/Moscow' # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. # # * Fine Tuning # #low_priority_updates = 1 concurrent_insert = ALWAYS wait_timeout = 600 interactive_timeout = 600 #normal key_buffer_size = 2024M #key_buffer_size = 1512M #70% hot cache key_cache_division_limit= 70 #16-32 max_allowed_packet = 32M #1-16M thread_stack = 8M #40-50 thread_cache_size = 50 #orderby groupby sort sort_buffer_size = 64M #same myisam_sort_buffer_size = 400M #temp table creates when group_by tmp_table_size = 3000M #tables in memory max_heap_table_size = 3000M #on disk open_files_limit = 10000 table_cache = 10000 join_buffer_size = 5M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #myisam_use_mmap = 1 max_connections = 200 thread_concurrency = 8 # # * Query Cache Configuration # #more ignored query_cache_limit = 50M query_cache_size = 210M #on query cache query_cache_type = 1 # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /var/log/mysql/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 1 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log server-id = 1 log-bin = /var/lib/mysql/mysql-bin #replicate-do-db = gate log-bin-index = /var/lib/mysql/mysql-bin.index log-error = /var/lib/mysql/mysql-bin.err relay-log = /var/lib/mysql/relay-bin relay-log-info-file = /var/lib/mysql/relay-bin.info relay-log-index = /var/lib/mysql/relay-bin.index binlog_do_db = 24avia expire_logs_days = 10 max_binlog_size = 100M read_buffer_size = 4024288 innodb_buffer_pool_size = 5000M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 8 table_definition_cache = 2000 group_concat_max_len = 16M #binlog_do_db = gate #binlog_ignore_db = include_database_name # # * BerkeleyDB # # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12. #skip-bdb # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # You might want to disable InnoDB to shrink the mysqld process by circa 100MB. #skip-innodb # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 500M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M key_buffer_size = 512M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ Please, help me make it stable. Memory used /etc/mysql # free total used free shared buffers cached Mem: 32930800 32766424 164376 0 139208 23829196 -/+ buffers/cache: 8798020 24132780 Swap: 33553328 44660 33508668 Maybe my problem not in memory, but MySQL stops every day. As you can see, cache memory free 24 gb. Thank to Michael Hampton? for correction. Load overage on server 3.5. Maybe hdd or another problem? Maybe my config not optimal for 30gb InnoDB ?

  Read the article

• How to stop windows resizing when the monitor display channel is turned off / switched to different source

  - by Heartspeace

  Have a new 6870 ati radeon adapter with its drivers set to 1080p 60hz resolution hooked up to a 2008 47" high end Samsung HDMI based TV. However, when the tv is turned to a different hdmi input -(when I come back into windows) somehow Windows decides to resize all the open apps to a lower resolution - including some of the side docked hidden pop-outs. When it resizes those though - it just sticked the pop-outs in the middle of the screen and all the resized windows from the open applications in the top left corner - all of them stacked on top of each other and resized to the smaller resolution. The things that seem to be ok after returning are the icons on the desktop, the taskbar, and the sidebar. Anyone have any knowledge of 1) how this happens 2) why it happens 3) how to stop it from resizing the applications and some of the docked pop-outs (they are not really resized after returning - they are just stuck in the middle of the screen approximately where they would be if the right or bottom sidebar should be if the screen was resized to that lower resolution). My hypothesis is that upon losing HDMI signal - that Windows is told by something (driver, or windows itself) that the resolution to be without a signal being present (noting that HDMI signals and handshakes are two way on HDMI devices. If it loses the signal or the tv is switched to another device - then the display adapter must figure that out and tell Windows or figures it out and designs randomly to change the display size). Any and all help is most appreciated. I asked AMD/ATI - but they said they don't know why or how this is happening. I was hoping that maybe this is THE place that the super users truly go to - those that develop display adapter drivers, or that dive deeply into these areas of windows. If there is better sites or just competing sites - please advise - noting I have already written AMD/ATI. HP Response / Additions 4/7/2011 It is really nice to get your reply Shinrai. (BTW is it proper etiquette on these forums to have a discussion?) Yet 'only one issue' - I am using a single display in this case - so Windows doesn't move application windows to another desktop. Windows (or something) decides to shrink the desktop it currently has and resize all windows to the maximum size of the desktop. As such I would be glad if Windows would just keep the current size of the one desktop that is in operation. I also know that this does NOT happen on monitors connected with DVI. There I have had one and two monitors setup and it doesn't resize those screens at all when disconnecting monitors, turning them off, whatever... they stay solid - everything in place - to such an extent that if you forgot the other monitor is off - you will have troubles finding some windows without using one of the control app utilities. So if I could even get the HDMI handling by Windows (or the display driver) ( 1] which is doing this anyway the display driver or Windows - and 2] where is that other resolution size (1024x768) coming from - its not the smallest and its not the largest?) to be having like DVI - Life would be golden (for this aspect anyway). ** found others with same problem in this thread: http://hardforum.com/showthread.php?t=1507324 Thanks, HP

  Read the article

• I&rsquo;m sorry RPGs, it&rsquo;s not you, it&rsquo;s me: The birth of my game idea

  - by George Clingerman

  One of the things I’ve had to give up in order to have some development time at night is gaming. It’s something I refused to admit for years but I’ve just had to face the facts. I’m no longer a gamer. I just don’t have hours and hours of free time to pour into gaming and when I do have hours and hours of free time I want to pour them into game development. That doesn’t mean I don’t game at all! I play games pretty much every day. It just means I’ve moved more into the casual game realm. It’s all I have time for when juggling priorities in my life. That means that games like Gears of War 2 sit shrink wrapped on my shelf and although I popped Dragon Age into my Xbox 360 one time, I barely made it through the opening sequence and haven’t had time to sit down and play again. Instead I’m playing short games like Jamestown, Atom Zombie Smasher, Fortix or if I have time to jump in and play a few rounds maybe some Monday Night Combat or Team Fortress 2. These are games I can instantly get into and play for just a short period of time and then walk away. Breath of Death VII saved my life: Back in the day (way, way back in the day) I used to be a pretty big RPG fan. Not big by a lot of RPG gamers' standards (most of the RPGs RPG fans about I’ve never heard of) but I used to LOVE to play them on the NES, SNES and Genesis and considered that my genre. Final Fantasy, Shining in the Darkness, Bard’s Tale, Faxanadu, Shadowrun, Ultima, Dragon Warrior, Chrono Trigger, Phantasy Star, Shining Force and well the list could go on but those are the ones I remember off the top of my head. I loved playing RPGs and they were my games of choice. After my first son was born (this was just about 12 years ago), I tried to continue playing RPGs and purchased games like Baldur’s Gate I & II, Neverwinter Nights, Fable, then a few of the Final Fantasy’s then Kingdom Hearts. I kept buying these games and then only playing for about fifteen minutes and never getting back to them. I still loved RPGs but they just no longer fit into my life (I still haven’t accepted that since I still purchased Dragon Age II for some reason and convinced myself I’d find the time). Adding three more sons to the mix (that’s 4 total) didn’t help much to finding more RPG time (except for Breath of Death VII and other XBLIG RPG titles, thanks guys!) All work and no RPG: A few months ago as I was sitting thinking about the lack of RPGs in my life and talking to my wife about why I wish RPGs were different and easier for a dad like me to get into. She seemed like she was listening, so I started listing all the things that made them impossible for me to play. Here’s a short list I came up with. They take 15 billion hours to complete I have a few minutes at a time I can grab to play them if I want to have time to code. At that rate it would take me 9 trillion years to beat just one RPG. There’s such long spans of times between when I can play them I forget what I was even doing so I have to spend most of the playtime I have just figuring that out and then my play time is over. Repeat. I’ll never finish one and since it takes so long to get to the fun part in an RPG, I’m never having fun. RPGs aren’t fun if you don’t have hours to play them at a time. As you can see based on my science and math, RPGs aren’t fun for me any more. From there my brain started toying around with ideas of RPGs that would work for me. They would have to be a short RPG, you know one you could beat in a single play session. A dad sized play session. I started thinking, wouldn’t it be awesome if there was a fifteen minute RPG? That got me laughing and I took that as a good sign that it sounded fun and so I thought about it a little more. I immediately discarded the idea of doing a real RPG. I’m sure a short RPG like that could be done but it wasn’t the vibe that I had in my head. No this was going to be something that just had the core essence of an RPG. In reality what I’d be making would be more of an arcade style game. One with high scores and lots of crazy action on the screen. And that’s when it hit me. It would be a speed run RPG. That’s the basics of the game I’m working on.   The Elevator Pitch: It’s a 2D top down RPG themed arcade game focused on speed. It sounds like an RPG, smells like an RPG but it’s merely emulating an RPG. The game is focused on fun and mayhem in RPG form with players leveling up in seconds instead of hours and rushing to finish quests as quickly as possible because they’ve only got fifteen minutes before EVIL overtakes the world. If the player takes longer than fifteen minutes, it’s game over man. One to four player co-operative play to really see just how fast players can level up and beat the game. Gamers will compete on leaderboards for bragging rights for fastest 1, 2, 3, and 4 player speed runs, lowest leveled characters to beat the game, highest leveled characters to beat the game and so on. Times will be tracked for everything from how long a player sat distributing stats, equipping items, talking to NPCs to running around the level. These stats will be shown at the end of each quest/level so the players can work on improving their speed run for that part of the game next time around. It’s the perfect RPG for those of us who only have fifteen minutes of game time! Where I’m at: I’m still at the prototyping stage attempting to but all the basic framework pieces in place that will at minimum give me one level to rush through. I’ve been working on this prototype for about a month now though so I’m going to have to step it up a bit or I’m not going to get finished in time (remember I’ve only got 85 days left!) Lots of the game code is in place (although pretty sloppy) but I still can’t play through that first quest/level just yet. That’s my goal to finish up by the end of next Sunday (3/25/2012). You can all hold me to that and cheer me on or heckle me throughout the week. Either way that should help me stay a bit more motivated and focused. In my head this feels like it’s going to be a fun game so I’m looking forward to seeing how it actually plays!

  Read the article

• Fragmented Log files could be slowing down your database

  - by Fatherjack

  Something that is sometimes forgotten by a lot of DBAs is the fact that database log files get fragmented in the same way that you get fragmentation in a data file. The cause is very different but the effect is the same – too much effort reading and writing data. Data files get fragmented as data is changed through normal system activity, INSERTs, UPDATEs and DELETEs cause fragmentation and most experienced DBAs are monitoring their indexes for fragmentation and dealing with it accordingly. However, you don’t hear about so many working on their log files. How can a log file get fragmented? I’m glad you asked. When you create a database there are at least two files created on the disk storage; an mdf for the data and an ldf for the log file (you can also have ndf files for extra data storage but that’s off topic for now). It is wholly possible to have more than one log file but in most cases there is little point in creating more than one as the log file is written to in a ‘wrap-around’ method (more on that later). When a log file is created at the time that a database is created the file is actually sub divided into a number of virtual log files (VLFs). The number and size of these VLFs depends on the size chosen for the log file. VLFs are also created in the space added to a log file when a log file growth event takes place. Do you have your log files set to auto grow? Then you have potentially been introducing many VLFs into your log file. Let’s get to see how many VLFs we have in a brand new database. USE master GO CREATE DATABASE VLF_Test ON ( NAME = VLF_Test, FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL10.ROCK_2008\MSSQL\DATA\VLF_Test.mdf', SIZE = 100, MAXSIZE = 500, FILEGROWTH = 50 ) LOG ON ( NAME = VLF_Test_Log, FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL10.ROCK_2008\MSSQL\DATA\VLF_Test_log.ldf', SIZE = 5MB, MAXSIZE = 250MB, FILEGROWTH = 5MB ); go USE VLF_Test go DBCC LOGINFO; The results of this are firstly a new database is created with specified files sizes and the the DBCC LOGINFO results are returned to the script editor. The DBCC LOGINFO results have plenty of interesting information in them but lets first note there are 4 rows of information, this relates to the fact that 4 VLFs have been created in the log file. The values in the FileSize column are the sizes of each VLF in bytes, you will see that the last one to be created is slightly larger than the others. So, a 5MB log file has 4 VLFs of roughly 1.25 MB. Lets alter the CREATE DATABASE script to create a log file that’s a bit bigger and see what happens. Alter the code above so that the log file details are replaced by LOG ON ( NAME = VLF_Test_Log, FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL10.ROCK_2008\MSSQL\DATA\VLF_Test_log.ldf', SIZE = 1GB, MAXSIZE = 25GB, FILEGROWTH = 1GB ); With a bigger log file specified we get more VLFs What if we make it bigger again? LOG ON ( NAME = VLF_Test_Log, FILENAME = 'C:\Program Files\Microsoft SQL Server\MSSQL10.ROCK_2008\MSSQL\DATA\VLF_Test_log.ldf', SIZE = 5GB, MAXSIZE = 250GB, FILEGROWTH = 5GB ); This time we see more VLFs are created within our log file. We now have our 5GB log file comprised of 16 files of 320MB each. In fact these sizes fall into all the ranges that control the VLF creation criteria – what a coincidence! The rules that are followed when a log file is created or has it’s size increased are pretty basic. If the file growth is lower than 64MB then 4 VLFs are created If the growth is between 64MB and 1GB then 8 VLFs are created If the growth is greater than 1GB then 16 VLFs are created. Now the potential for chaos comes if the default values and settings for log file growth are used. By default a database log file gets a 1MB log file with unlimited growth in steps of 10%. The database we just created is 6 MB, let’s add some data and see what happens. USE vlf_test go -- we need somewhere to put the data so, a table is in order IF OBJECT_ID('A_Table') IS NOT NULL DROP TABLE A_Table go CREATE TABLE A_Table ( Col_A int IDENTITY, Col_B CHAR(8000) ) GO -- Let's check the state of the log file -- 4 VLFs found EXECUTE ('DBCC LOGINFO'); go -- We can go ahead and insert some data and then check the state of the log file again INSERT A_Table (col_b) SELECT TOP 500 REPLICATE('a',2000) FROM sys.columns AS sc, sys.columns AS sc2 GO -- insert 500 rows and we get 22 VLFs EXECUTE ('DBCC LOGINFO'); go -- Let's insert more rows INSERT A_Table (col_b) SELECT TOP 2000 REPLICATE('a',2000) FROM sys.columns AS sc, sys.columns AS sc2 GO 10 -- insert 2000 rows, in 10 batches and we suddenly have 107 VLFs EXECUTE ('DBCC LOGINFO'); Well, that escalated quickly! Our log file is split, internally, into 107 fragments after a few thousand inserts. The same happens with any logged transactions, I just chose to illustrate this with INSERTs. Having too many VLFs can cause performance degradation at times of database start up, log backup and log restore operations so it’s well worth keeping a check on this property. How do we prevent excessive VLF creation? Creating the database with larger files and also with larger growth steps and actively choosing to grow your databases rather than leaving it to the Auto Grow event can make sure that the growths are made with a size that is optimal. How do we resolve a situation of a database with too many VLFs? This process needs to be done when the database is under little or no stress so that you don’t affect system users. The steps are: BACKUP LOG YourDBName TO YourBackupDestinationOfChoice Shrink the log file to its smallest possible size DBCC SHRINKFILE(FileNameOfTLogHere, TRUNCATEONLY) * Re-size the log file to the size you want it to, taking in to account your expected needs for the coming months or year. ALTER DATABASE YourDBName MODIFY FILE ( NAME = FileNameOfTLogHere, SIZE = TheSizeYouWantItToBeIn_MB) * – If you don’t know the file name of your log file then run sp_helpfile while you are connected to the database that you want to work on and you will get the details you need. The resize step can take quite a while This is already detailed far better than I can explain it by Kimberley Tripp in her blog 8-Steps-to-better-Transaction-Log-throughput.aspx. The result of this will be a log file with a VLF count according to the bullet list above. Knowing when VLFs are being created By complete coincidence while I have been writing this blog (it’s been quite some time from it’s inception to going live) Jonathan Kehayias from SQLSkills.com has written a great article on how to track database file growth using Event Notifications and Service Broker. I strongly recommend taking a look at it as this is going to catch any sneaky auto grows that take place and let you know about them right away. Hassle free monitoring of VLFs If you are lucky or wise enough to be using SQL Monitor or another monitoring tool that let’s you write your own custom metrics then you can keep an eye on this very easily. There is a custom metric for VLFs (written by Stuart Ainsworth) already on the site and there are some others there are very useful so take a moment or two to look around while you are there. Resources MSDN – http://msdn.microsoft.com/en-us/library/ms179355(v=sql.105).aspx Kimberly Tripp from SQLSkills.com – http://www.sqlskills.com/BLOGS/KIMBERLY/post/8-Steps-to-better-Transaction-Log-throughput.aspx Thomas LaRock at Simple-Talk.com – http://www.simple-talk.com/sql/database-administration/monitoring-sql-server-virtual-log-file-fragmentation/ Disclosure I am a Friend of Red Gate. This means that I am more than likely to say good things about Red Gate DBA and Developer tools. No matter how awesome I make them sound, take the time to compare them with other products before you contact the Red Gate sales team to make your order.

  Read the article

• Responsive Inline Elements with Twitter Bootstrap

  - by MightyZot

  Originally posted on: http://geekswithblogs.net/MightyZot/archive/2013/11/12/responsive-inline-elements-with-twitter-bootstrap.aspxTwitter Boostrap is a responsive css platform created by some dudes affiliated with Twitter and since supported and maintained by an open source following. I absolutely love the new version of this css toolkit. They rebuilt it with a mobile first strategy and it’s very easy to layout pages once you get the hang of it. Using a css / javascript framework like bootstrap is certainly much easier than coding your layout by hand. And, you get a “leg up” when it comes to adding responsive features to your site. Bootstrap includes column layout classes that let you specify size and placement based upon the viewport width. In addition, there are a handful of responsive helpers to hide and show content based upon the user’s device size. Most notably, the visible-xs, visible-sm, visible-md, and visible-lg classes let you show content for devices corresponding to those sizes (they are listed in the bootstrap docs.) hidden-xs, hidden-sm, hidden-md, and hidden-lg let you hide content for devices with those respective sizes. These helpers work great for showing and hiding block elements. Unfortunately, there isn’t a provision yet in Twitter Bootstrap (as of the time of this writing) for inline elements. We are using the navbar classes to create a navigation bar at the top of our website, www.crowdit.com. When you shrink the width of the screen to tablet or phone size, the tools in the navbar are turned into a drop down menu, and a button appears on the right side of the navbar. This is great! But, we wanted different content to display based upon whether the items were on the navbar versus when they were in the dropdown menu. The visible-?? and hidden-?? classes make this easy for images and block elements. In our case, we wanted our anchors to show different text depending upon whether they’re in the navbar, or in the dropdown. span is inherently inline and it can be a block element. My first approach was to create two anchors for each options, one set visible when the navbar is on a desktop or laptop with a wide display and another set visible when the elements converted to a dropdown menu. That works fine with the visible-?? and hidden-?? classes, but it just doesn’t seem that clean to me. I put up with that for about a week…last night I created the following classes to augment the block-based classes provided by bootstrap. .cdt-hidden-xs, .cdt-hidden-sm, .cdt-hidden-md, .cdt-hidden-lg {     display: inline !important; } @media (max-width:767px) {     .cdt-hidden-xs, .cdt-hidden-sm.cdt-hidden-xs, .cdt-hidden-md.cdt-hidden-xs, .cdt-hidden-lg.cdt-hidden-xs {         display: none !important;     } } @media (min-width:768px) and (max-width:991px) {     .cdt-hidden-xs.cdt-hidden-sm, .cdt-hidden-sm, .cdt-hidden-md.cdt-hidden-sm, .cdt-hidden-lg.cdt-hidden-sm {         display: none !important;     } } @media (min-width:992px) and (max-width:1199px) {     .cdt-hidden-xs.cdt-hidden-md, .cdt-hidden-sm.cdt-hidden-md, .cdt-hidden-md, .cdt-hidden-lg.cdt-hidden-md {         display: none !important;     } } @media (min-width:1200px) {     .cdt-hidden-xs.cdt-hidden-lg, .cdt-hidden-sm.cdt-hidden-lg, .cdt-hidden-md.cdt-hidden-lg, .cdt-hidden-lg {         display: none !important;     } } .cdt-visible-xs, .cdt-visible-sm, .cdt-visible-md, .cdt-visible-lg {     display: none !important; } @media (max-width:767px) {     .cdt-visible-xs, .cdt-visible-sm.cdt-visible-xs, .cdt-visible-md.cdt-visible-xs, .cdt-visible-lg.cdt-visible-xs {         display: inline !important;     } } @media (min-width:768px) and (max-width:991px) {     .cdt-visible-xs.cdt-visible-sm, .cdt-visible-sm, .cdt-visible-md.cdt-visible-sm, .cdt-visible-lg.cdt-visible-sm {         display: inline !important;     } } @media (min-width:992px) and (max-width:1199px) {     .cdt-visible-xs.cdt-visible-md, .cdt-visible-sm.cdt-visible-md, .cdt-visible-md, .cdt-visible-lg.cdt-visible-md {         display: inline !important;     } } @media (min-width:1200px) {     .cdt-visible-xs.cdt-visible-lg, .cdt-visible-sm.cdt-visible-lg, .cdt-visible-md.cdt-visible-lg, .cdt-visible-lg {         display: inline !important;     } } I created these by looking at the example provided by bootstrap and consolidating the styles. “cdt” is just a prefix that I’m using to distinguish these classes from the block-based classes in bootstrap. You are welcome to change the prefix to whatever feels right for you. These classes can be applied to spans in textual content to hide and show text based upon the browser width. Applying the styles is simple… <span class=”cdt-visible-xs”>This text is visible in extra small</span> <span class=”cdt-visible-sm”>This text is visible in small</span> Why would you want to do this? Here are a couple of examples, shown in screen shots. This is the CrowdIt navbar on larger displays. Notice how the text is two line and certain words are capitalized? Now, check this out! Here is a screen shot showing the dropdown menu that’s displayed when the browser window is tablet or phone sized. The markup to make this happen is quite simple…take a look. <li>     <a href="@Url.Action("what-is-crowdit","home")" title="Learn about what CrowdIt can do for your Small Business">         <span class="cdt-hidden-xs">WHAT<br /><small>is CrowdIt?</small></span>         <span class="cdt-visible-xs">What is CrowdIt?</span>     </a> </li> There is a single anchor tag in this example and only the spans change visibility based on browser width. I left them separate for readability and because I wanted to use the small tag; however, you could just as easily hide the “WHAT” and the br tag on small displays and replace them with “What “, consolidating this even further to text containing a single span. <span class=”cdt-hidden-xs”>WHAT<br /></span><span class=”cdt-visible-xs”>What </span>is CrowdIt? You might be a master of css and have a better method of handling this problem. If so, I’d love to hear about your solution…leave me some feedback! You’ll be entered into a drawing for a chance to win an autographed picture of ME! Yay!

  Read the article

• Expectations + Rewards = Innovation

  - by D'Arcy Lussier

  “Innovation” is a heavy word. We regard those that embrace it as “Innovators”. We describe organizations as being “Innovative”. We hold those associated with the word in high regard, even though its dictionary definition is very simple: Introducing something new. What our culture has done is wrapped Innovation in white robes and a gold crown. Innovation is rarely just introducing something new. Innovations and innovators are typically associated with other terms: groundbreaking, genius, industry-changing, creative, leading. Being a true innovator and creating innovations are a big deal, and something companies try to strive for…or at least say they strive for. There’s huge value in being recognized as an innovator in an industry, since the idea is that innovation equates to increased profitability. IBM ran an ad a few years back that showed what their view of innovation is: “The point of innovation is to make actual money.” If the money aspect makes you feel uneasy, consider it another way: the point of innovation is to <insert payoff here>. Companies that innovate will be more successful. Non-profits that innovate can better serve their target clients. Governments that innovate can better provide services to their citizens. True innovation is not easy to come by though. As with anything in business, how well an organization will innovate is reliant on the employees it retains, the expectations placed on those employees, and the rewards available to them. In a previous blog post I talked about one formula: Right Employees + Happy Employees = Productive Employees I want to introduce a new one, that builds upon the previous one: Expectations + Rewards = Innovation  The level of innovation your organization will realize is directly associated with the expectations you place on your staff and the rewards you make available to them. Expectations We may feel uncomfortable with the idea of placing expectations on our staff, mainly because expectation has somewhat of a negative or cold connotation to it: “I expect you to act this way or else!” The problem is in the or-else part…we focus on the negative aspects of failing to meet expectations instead of looking at the positive side. “I expect you to act this way because it will produce <insert benefit here>”. Expectations should not be set to punish but instead be set to ensure quality. At a recent conference I spoke with some Microsoft employees who told me that you have five years from starting with the company to reach a “Senior” level. If you don’t, then you’re let go. The expectation Microsoft placed on their staff is that they should be working towards improving themselves, taking more responsibility, and thus ensure that there is a constant level of quality in the workforce. Rewards Let me be clear: a paycheck is not a reward. A paycheck is simply the employer’s responsibility in the employee/employer relationship. A paycheck will never be the key motivator to drive innovation. Offering employees something over and above their required compensation can spur them to greater performance and achievement. Working in the food service industry, this tactic was used again and again: whoever has the highest sales over lunch will receive a free lunch/gift certificate/entry into a draw/etc. There was something to strive for, to try beyond the baseline of what our serving jobs were. It was through this that innovative sales techniques would be tried and honed, with key servers being top sellers time and time again. At a code camp I spoke at, I was amazed to see that all the employees from one company receive $100 Visa gift cards as a thank you for taking time to speak. Again, offering something over and above that can give that extra push for employees. Rewards work. But what about the fairness angle? In the restaurant example I gave, there were servers that would never win the competition. They just weren’t good enough at selling and never seemed to get better. So should those that did work at performing better and produce more sales for the restaurant not get rewarded because those who weren’t working at performing better might get upset? Of course not! Organizations succeed because of their top performers and those that strive to join their ranks. The Expectation/Reward Graph While the Expectations + Rewards = Innovation formula may seem like a simple mathematics formula, there’s much more going under the hood. In fact there are three different outcomes that could occur based on what you put in as values for Expectations and Rewards. Consider the graph below and the descriptions that follow: Disgruntled – High Expectation, Low Reward I worked at a company where the mantra was “Company First, Because We Pay You”. Even today I still hear stories of how this sentiment continues to be perpetuated: They provide you a paycheck and a means to live, therefore you should always put them as your top priority. Of course, this is a huge imbalance in the expectation/reward equation. Why would anyone willingly meet high expectations of availability, workload, deadlines, etc. when there is no reward other than a paycheck to show for it? Remember: paychecks are not rewards! Instead, you see employees be disgruntled which not only affects the level of production but also the level of quality within an organization. It also means that you see higher turnover. Complacent – Low Expectation, Low Reward Complacency is a systemic problem that typically exists throughout all levels of an organization. With no real expectations or rewards, nobody needs to excel. In fact, those that do try to innovate, improve, or introduce new things into the organization might be shunned or pushed out by the rest of the staff who are just doing things the same way they’ve always done it. The bigger issue for the organization with low/low values is that at best they’ll never grow beyond their current size (and may shrink actually), and at worst will cease to exist. Entitled – Low Expectation, High Reward It’s one thing to say you have the best people and reward them as such, but its another thing to actually have the best people and reward them as such. Organizations with Entitled employees are the former: their organization provides them with all types of comforts, benefits, and perks. But there’s no requirement before the rewards are dolled out, and there’s no short-list of who receives the rewards. Everyone in the company is treated the same and is given equal share of the spoils. Entitlement is actually almost identical with Complacency with one notable difference: just try to introduce higher expectations into an entitled organization! Entitled employees have been spoiled for so long that they can’t fathom having rewards taken from them, or having to achieve specific levels of performance before attaining them. Those running the organization also buy in to the Entitled sentiment, feeling that they must persist the same level of comforts to appease their staff…even though the quality of the employee pool may be suspect. Innovative – High Expectation, High Reward Finally we have the Innovative organization which places high expectations but also provides high rewards. This organization gets it: if you truly want the best employees you need to apply equal doses of pressure and praise. Realize that I’m not suggesting crazy overtime or un-realistic working conditions. I do not agree with the “Glengary-Glenross” method of encouragement. But as anyone who follows sports can tell you, the teams that win are the ones where the coaches push their players to be their best; to achieve new levels of performance that they didn’t know they could receive. And the result for the players is more money, fame, and opportunity. It’s in this environment that organizations can focus on innovation – true innovation that builds the business and allows everyone involved to truly benefit. In Closing Organizations love to use the word “Innovation” and its derivatives, but very few actually do innovate. For many, the term has just become another marketing buzzword to lump in with all the other business terms that get overused. But for those organizations that truly get the value of innovation, they will be the ones surging forward while other companies simply fade into the background. And they will be the organizations that expect more from their employees, and give them their just rewards.

  Read the article

< Previous Page | 13 14 15 16 17 18  | Next Page >