Search Results

Search found 24106 results on 965 pages for 'usb key'.

Page 17/965 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

• Looking for USB Network Attached Storage (NAS) Adapter that supports multiple drives, NTFS/FAT32 fil

  - by braveterry

  I'm looking for a NAS Adapter that supports attaching multiple USB devices to the network. Here's what I'd like to see in a NAS adapter: Under $100.00. Support for multiple devices. This can be through a USB hub or through multiple USB connectors on the device itself. Bittorrent support would be nice, but this isn't a deal-breaker. Filesystem support for at least NTFS or FAT32. I'd prefer to not have to reformat to use the device, but this is also not a deal-breaker. Here is what I am NOT looking for: I'm NOT looking for a NAS enclosure. I already have a couple of spare external USB drives that I'd like to use. I'm NOT looking for a networked USB hub like the one mentioned here. Network USB hubs only allow access to a drive from one PC at a time. I'm NOT looking for a wireless router with a NAS built in. I already have a wireless router, and I'd rather not go through the hassle of replacing it if possible. What I've looked at so far PogoPlug: This supports multiple devices via a USB hub, but there's not Bittorrent support. It's $99.00, so I may end up going with this and hope that they patch in Bittorrent support later. Addonics NAS Adapter: This supports only one device per adapter, so it's a non-starter. SimpleNET NAS Head USB 2.0 Portable Dongle: I'm not 100% sure this supports multiple devices. Plus there doesn't seem to be any Bittorrent support. I'll try to update this post as I explore other devices.

  Read the article

• Dell XPS 17 Laptop USB SS Ports don't work until machine rebooted

  - by Matt

  I have a new Dell XPS 17 laptop and have an issue that the two USB SS ports on the rear of the machine are not recognising anything when I start-up. Have tried mouse, keyboard, headset, USB display. If I plug a USB hub in the power light on the hub lights (presume this is hard-wired) but a mouse plugged into the hub does not light up. If I restart the pc the ports work fine. Also the other two USB ports work fine all the time. I have switched off the power saving setting on the device manager (Power managementAllow the computer to turn off this device to save power) and also in the advanced power settings (USB Settings USB Selective suspend setting:disabled) I have also disabled USB powershare in the BIOS (not sure what this actually does!) This is becoming very annoying having to restart the machine every day before I can start work Running Win 7 Pro x64 EDIT: I have found that setting USB Emulation to Disabled has helped the devices to be recognised during start up but they keep dropping out completely when in use EDIT 2: I contacted Dell about this issue who told me to update the BIOS driver, when I asked if I should downgrade from the factory installed A13 to the A12 posted on the dell website they said no. However there is now an A14 available on the website has anyone tried this?

  Read the article

• Multi-partition USB stick

  - by nightcracker

  In my freelance job as "the dude that fixes your computer" I have an extremely handy tool, a bootable USB stick with Ubuntu LiveCD that allows me to recover and investigate in a known, working environment. Now, I want to reformat this USB stick and reinstall with Casper-RW persistance. I did this a few times before with a FAT-formatted USB stick. It was a horror. The USB drive corrupted constantly, by people accidently removing the USB stick, the computer not properly shutting down, ETC. Now what I want to create a multi-partition USB stick so I can put Ubuntu on a ext partition, but still be able to store some Windows stuff in it, by having a secondary FAT partition. However I read somewhere that Windows will only check the first partition on USB sticks, giving a problem with the first bootable linux partition. Is this possible on some way? EDIT Perhaps it wasn't clear what the problem is. The problem is that I read somewhere that Windows will only recognize the first partition on a USB stick. But I want two partitions, a ext partition and a FAT partition. No issues so far, but in order to be bootable the ext partition must be the first one!

  Read the article

• usb wifi dongle on ubuntu server, cannot install realtek driver RTL 8188cus

  - by Sandro Dzneladze

  I got cheap Ebay wifi dongle from HongKong, Im trying to set it up on my ubuntu server. Occasionally need to move server, so it cannot always be connected to router via lan. Anyhow, usb wifi came with a driver cd. I uploaded files to my home directory and tried to run install script (RTL 8188cus): sudo bash install.sh But I get error: Authentication requested [root] for make driver: make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/2.6.38-8-server/build M=/home/minime/RTL 8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126 modules make[1]: Entering directory `/usr/src/linux-headers-2.6.38-8-server' make[1]: *** No rule to make target `8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126'. Stop. make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-server' make: *** [modules] Error 2 Compile make driver error: 2, Please check error Mesg Any ideas what Im doing wrong? There is another driver folder for linux called: RTL 81XX, which doesn't have install.sh at all! I tried to use make command, but I get: make: *** No targets specified and no makefile found. Stop. Any help? this is first time I'm installing driver from source. Im on Ubuntu 11.04 server. lsusb Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02) 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a001] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 01:00.0 Ethernet controller [0200]: Atheros Communications Device [1969:1083] (rev c0) sudo lshw description: Desktop Computer product: To Be Filled By O.E.M. (To Be Filled By O.E.M.) vendor: To Be Filled By O.E.M. version: To Be Filled By O.E.M. serial: To Be Filled By O.E.M. width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: AD525PV3 vendor: ASRock physical id: 0 *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: P1.20 date: 04/01/2011 size: 64KiB capacity: 448KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification netboot *-cpu description: CPU product: Intel(R) Atom(TM) CPU D525 @ 1.80GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Atom(TM) CPU D525 @ 1.80GHz serial: To Be Filled By O.E.M. slot: CPUSocket size: 1800MHz capacity: 1800MHz width: 64 bits clock: 200MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 48KiB capacity: 48KiB capabilities: internal write-back data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-back unified *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM DDR2 Synchronous 800 MHz (1.2 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-bank:1 description: DIMM [empty] product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 *-pci description: Host bridge product: N10 Family DMI Bridge vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 02 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display description: VGA compatible controller product: N10 Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:41 memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fe900000-fe9fffff *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:43 memory:fea78000-fea7bfff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:feb00000-febfffff ioport:80000000(size=2097152) *-network description: Ethernet interface product: Atheros Communications vendor: Atheros Communications physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: c0 serial: XX size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.99 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:42 memory:febc0000-febfffff ioport:ec00(size=128) *-usb:0 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:d880(size=32) *-usb:1 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:d800(size=32) *-usb:2 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:d480(size=32) *-usb:3 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:d400(size=32) *-usb:4 description: USB Controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fea77c00-fea77fff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-ide description: IDE interface product: N10/ICH7 Family SATA IDE Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list emulated configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff90(size=16) memory:80200000-802003ff *-disk description: ATA Disk product: WDC WD10TPVT-11U vendor: Western Digital physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WXC1A80P0314 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00088c47 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: /media/private version: 1.0 serial: 042daf2d-350c-4640-a76a-4554c9d98c59 size: 300GiB capacity: 300GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:03 filesystem=ext4 label=Private lastmountpoint=/media/private modified=2012-04-13 20:01:16 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-13 20:01:16 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 625GiB capacity: 625GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux filesystem partition physical id: 5 logical name: /dev/sda5 logical name: /media/storage capacity: 600GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: /media/dropbox capacity: 24GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-volume:2 description: EXT4 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 logical name: /media/www version: 1.0 serial: 9b0a27b4-05d8-40d5-bfc7-4aeba198db7b size: 2570MiB capacity: 2570MiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:11 filesystem=ext4 label=www lastmountpoint=/media/www modified=2012-04-15 11:31:12 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-15 11:31:12 state=mounted *-volume:3 description: Linux swap volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 version: 1 serial: 6ed1130e-3aad-4fa6-890b-77e729121e3b size: 4098MiB capacity: 4098MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:400(size=32) *-scsi physical id: 1 bus info: usb@1:4 logical name: scsi2 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@2:0.0.0 logical name: /dev/sdb size: 3864MiB (4051MB) capabilities: partitioned partitioned:dos configuration: signature=000b4c55 *-volume description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 logical name: /dev/sdb1 logical name: / version: 1.0 serial: 33926e39-4685-4f63-b83c-f2a67824b69a size: 3862MiB capacity: 3862MiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-10-11 14:03:46 filesystem=ext4 lastmountpoint=/ modified=2012-03-19 11:47:29 mount.fstype=ext4 mount.options=rw,noatime,errors=remount-ro,barrier=1,data=ordered mounted=2012-04-15 11:31:11 state=mounted rfkill list all Doesnt show anything! dmesg | grep -i firmware [ 0.715481] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared

  Read the article

• USB packets - receive wrong data

  - by regorianer

  i have a little python script which shows me the packets of an enocean device and does some events depending on the packet type. unfortunately it doesn't work because i'm getting wrong packets. Parts of the python script (used pySerial): Blockquote ser = serial.Serial('/dev/ttyUSB1',57600,bytesize = serial.EIGHTBITS,timeout = 1, parity = serial.PARITY_NONE , rtscts = 0) print 'clearing buffer' s = ser.read(10000) print 'start read' while 1: s = ser.read(1) for character in s: sys.stdout.write(" %s" % character.encode('hex')) print 'end' ser.close() output baudrate 57600: e0 e0 00 e0 00 e0 e0 e0 e0 e0 00 e0 e0 00 00 00 00 00 00 00 e0 e0 e0 00 00 00 00 e0 e0 e0 00 00 e0 e0 e0 e0 e0 00 e0 00 e0 e0 e0 e0 e0 00 e0 e0 00 00 00 00 00 00 e0 e0 e0 00 00 00 00 e0 e0 e0 00 00 e0 e0 e0 output baudrate 9600: a5 5a 0b 05 10 00 00 00 00 15 c4 56 20 6f a5 5a 0b 05 00 00 00 00 00 15 c4 56 20 5f linux terminal baudrate 57600: $stty -F /dev/ttyUSB1 57600 $stty < /dev/ttyUSB1 speed 57600 baud; line = 0; eof = ^A; min = 0; time = 0; -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke $while (true) do cat -A /dev/ttyUSB1 ; done myfile $hexdump -C myfile 00000000 4d 2d 60 4d 2d 60 5e 40 4d 2d 60 5e 40 4d 2d 60 |M-M-^@M-^@M-| 00000010 4d 2d 60 4d 2d 60 4d 2d 60 4d 2d 60 5e 40 4d 2d |M-M-M-M-^@M-| 00000020 60 4d 2d 60 5e 40 5e 40 5e 40 5e 40 5e 40 5e 40 |M-^@^@^@^@^@^@| 00000030 5e 40 4d 2d 60 4d 2d 60 4d 2d 60 5e 40 5e 40 5e |^@M-M-M-`^@^@^| 00000040 40 5e 40 4d 2d 60 4d 2d 60 4d 2d 60 |@^@M-M-M-`| 0000004c linux terminal baudrate 9600: $hexdump -C myfile2 00000000 5e 40 5e 55 4d 2d 44 56 30 4d 2d 3f 5e 40 5e 40 |^@^UM-DV0M-?^@^@| 00000010 5e 55 4d 2d 44 56 20 5f |^UM-DV _| 00000018 the specification says: 0x55 sync byte 1st 0xNNNN data length bytes (2 bytes) 0x07 opt length byte 0x01 type byte CRC, data, opt data und nochmal CRC but I'm not getting this packet structure. The output of the python script differs from the one I get via the terminal. I also wrote the python part with C, but the output is the same as with python As the USB receiver a BSC-BoR USB Receiver/Sender is used The EnOcean device is a simple button

  Read the article

• Gui Batch program on USB

  - by Chris Okyen

  When I put my USB drive into a computer, I want autorun.inf to run a batch file that will have a win32/winform GUI windows interface to allow the user to select a program to run from the beginning similiar to like this: Please let me know if windows allows this without it being done programmatically. I know their are some automation programs that work by generating code based on what it records you do. But I don't knwo of any already built windows prompt like this, so I don't knwo how to record such an action.

  Read the article

• Error splicing file: Input/output error with a USB SD/HC card reader [closed]

  - by PirateRussell

  I recently got a new Droid Bionic, and it has the SD/HC card. Today, I got a new USB card reader that reads the HC format. When I plug it into my Linux Mint 11 (katya), Gnome 32-bit computer, I get this error every I try to copy or move any file off of the card onto my desktop: Error splicing file: Input/output error I don't have the problem on a Windows Vista computer. Any ideas??? Thanks in advance...

  Read the article

• USB: Missing Operating System - MAC

  - by Viraj Rao

  Have installed Ubuntu 11.10 on USB using Live CD. Followed the steps as provided in below link https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation After installation is complete in Refit menu, when i click on Linux icon I receive "Missing Operating System" message. I followed the steps provided in the below link from this forum, but am still receiving the same message. Unable to boot: Missing Operating system Any assistance is highly appreciated.

  Read the article

• Ralink-based USB Wi-Fi adapter drops connection after some time

  - by Hector Aguilar

  I have an Intellinet Wireless 150N USB adapter (based on a Ralink rt3070 chip) in an Ubuntu 10.10 installation. The problem is, that it's dropping the connection after being connected to a wireless network for 10 - 20 minutes. I have to unplug it and plug it in again every time this happens. I read somewhere, that I need to blacklist some chipset modules, but I don't how? And which ralink modules I have to blacklist? Thanks for your answers! :D

  Read the article

• xubuntu 13.10: automount usb sticks

  - by netimen

  I have a freshly installed Xubuntu 13.10 on the Lenovo T520 laptop. In the Settings Manager — Removable Drives and Media I have the Mount removable drives when hot-plugged and Mount removable media when inserted checked. But when I insert an usb-stick (VFAT) it doesn't get auto-mounted. So I can't access it from terminal. It gets mounted only when I click on the drive icon on the desktop or in Thunar. Can I fix it somehow?

  Read the article

• import mini DV films from Samsung digital cam VP-D353 [USB]

  - by bobo

  I tried to import mini DV films from my old video camera VP-D353 and it's not reconised by my lubuntu.( 12.04 ) I tried "DVGRAB" which should work but it doesn't. I Found this tutorial http://www.foscode.com/linux-minidv-usb-video-capture/ But it's just saying "waiting for dv" I don't really know what should I do now. Here what I've got for the camera when I write : sudo lsub Bus 002 Device 013: ID 04e8:120f Samsung Electronics Co., Ltd thanks

  Read the article

• How to diagnose usb issue

  - by alexpotato

  Hey, So my kern.log and syslog files filled up with tons of the below messages: [514971.000109] phy0 - rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x30c4 with error -108. I was curious as to the steps to take, commands to run, places to look to help diagnose this issue (and curious as to what caused it)? I'm guessing it's something usb elated. I had some issues with my printer earlier today so this might be related. Thanks, Alex

  Read the article

• Unable to create an Ubuntu 12.10 USB stick on OS X

  - by Hex Bob-Omb

  I'm following the instructions to create a bootable Ubuntu 12.10 USB stick on OS X found here. I can do step 3 and hdiutil appears to work fine, but when I go to mount the resulting ubuntu.img file I get the same "no mountable file systems" error that I get when I try and open the ubuntu.iso file. No correctly sized volumes show up in diskutil list either. Any ideas? Using the most recent ubuntu-12.10-desktop-amd64.iso on Mountain Lion 10.8.2.

  Read the article

• "No caching mode page present" when USB flash disk attached

  - by evgeny9

  When attaching a USB flash disk (NTFS formatted) to a laptop with Ubuntu Server 12.04 on board, I get following messages: [ 3572.355603] sd 2:0:0:0: [sdb] No Caching mode page present [ 3572.355640] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 3572.361599] sd 2:0:0:0: [sdb] No Caching mode page present [ 3572.361636] sd 2:0:0:0: [sdb] Assuming drive cache: write through I get them right in the terminal, so that I should press Ctrl+C to proceed with working (entering commands). Is it normal or do I have to setup Caching mode somehow? Thank you.

  Read the article

• Can't boot from Ubuntu 12.04 live USB

  - by 8vius

  I'm trying to recover GRUB after installing Windows 7. I installed Ubuntu 12.04 first, then installed Windows 7 so I lost the GRUB at startup. Made a USB stick with Ubuntu to boot from, I get the menu tell it to start and it takes off but then gets stuck. The last line showing on the screen is: ata10: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 irq 17 or this: [4.793048] scsi9 : pata_jmicron Then it just gets stuck there and the screen flashes from time to time.

  Read the article

• Can't access external USB storage after updating to 12.10

  - by user99252

  I installed Ubuntu 12.04 after Windows failed me and Samsung got a bit pissy about providing any help. I then upgraded to 12.10 after a week or two and suddenly my external USB devices no longer work. The same devices I plugged in are no longer recognised. As I say, I'm only a user of Ubuntu for a fortnight, so any advice and directions to very simple instructions, would be appreciated greatly. I've seen this asked elsewhere, but the advice was to ask again if you needed clarification.

  Read the article

• Why isn't Startup Disk Creator working in 12.04?

  - by Steve Kelem

  I'm trying to create a bootable USB stick (7.5G) for Ubuntu 12.04 (x86_64) from another Ubuntu 12.04 x86_64 PC. I downloaded the Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425). When I run Make Startup Disk, I selected the downloaded release. The drive shows up with a capacity of 7.5GB and a blank space under "Free Space". I have tried using the "Erase Disk" button, which seems to erase the disk. The problem is that the options below the "Disk to use" section are grayed out. The "Make Startup Disk" is colored dull orange, while the source disc image and device to use are bright orange. The "Make Startup Disk" button doesn't do anything when I click it. The only working buttons are "Other...", "Erase Disk", and "Close". Upon using Other button to select the ISO, it allows to select the ISO but it doesn't load and the "Source Disk Image" field remains empty.

  Read the article

• Problems in detecting pen drive

  - by Mzk

  First of all, I don't have an issue with detecting my pen drive on 32-bit ubuntu 12.04. It can detect my pen drive very fast when plug in. Then, I bought a laptop installed with windows 7 64-bit operating system. I have decided to installed ubuntu alongside with win7. To be precise, I installed uBuntu 12.04.3 64-bit. It appears that every time I plug in my pen drive, it is either very slow automatically mount. It is even worst that the pen drive won't mount when plug in to usb 3.0 port. Anyone? UPDATE: My laptop can detect pen drive now either 3.0 or 2.0 port. The question is why the pen drive very slow shows up?

  Read the article

• Can I make USB drive bootable and install multiple OSes from it?

  - by Mirage

  Is it possible to have USB drive bootable and place multiple ISOs like Windows 7.iso WindowXP.iso Ubuntu.iso RHEL.iso so that I can choose which OS to install?

  Read the article

• Can I make USB drive bootable and install Multiple OS from it?

  - by Mirage

  Is it possible to have USB drive bootable and place multiple ISOs like Windows 7.iso WindowXP.iso Ubuntu.iso RHEL.iso so that I can choose which OS to install?

  Read the article

• [Windows] How do I preserve folder shares on a USB external drive?

  - by Brent.Longborough

  I'm using a WD Passport external hard drive with my notebook, and have a folder on this drive I need to share on my Windows network. Occasionally, when the drive is not plugged in, Windows appears to lose the shares, and I have to go in and share again. Does anyone have a good way to avoid losing the shares? Environment: Vista Home Premium, SP2 WD MyPassport USB-powered portable hard drive

  Read the article

• Are there any USB flash drives or SD cards which use RAID or redundant storage for additional reliability?

  - by Luke Dennis

  I'm looking to get a fault-tolerant USB flash drive, which saves data to multiple independent locations, whether using RAID or some other means to back up data. Has a product like this ever been created, or are my only options to hack something together? (By the way: I'm aware that RAID doesn't prevent data corruption from software or the file system. I'm just looking for something that can handle one of the memory sticks going dead.)

  Read the article

• How do I preserve folder shares on a USB external drive?

  - by Brent.Longborough

  I'm using a WD Passport external hard drive with my notebook, and have a folder on this drive I need to share on my Windows network. Occasionally, when the drive is not plugged in, Windows appears to lose the shares, and I have to go in and share again after it's plugged in again. Does anyone have a good way to avoid losing the shares? Environment: Vista Home Premium, SP2 WD MyPassport USB-powered portable hard drive

  Read the article

• My USB bootable thumb drive, no longer boots on a single particular computer on which it previously worked

  - by LiamMeron

  I created a bootable drive, booting CrunchBang, about 2 months ago. About a month ago, I booted into it on another laptop. After shutting down, I have been unable to get it to boot on my own laptop, despite having worked previously. I can still boot into it on my desktop, and can also boot into it on all other computers that I have tried. If I plug it in when I am running Ubuntu, the Home and / folders mount, the only error being that for some reason my PC likes to try and mount the swap partition too, which naturally, gives an error. The BIOS settings are all still setup to boot from USB. When I boot, all I get is a black screen with the white cursor, it will stay there for as long as I leave it. If it is worth anything, I have GRUB loader installed on the drive. The partitions look a little odd, but I am rather unfamiliar with how they are dealt with. The first partition, /, is sdb1 and has the bootable flag. The second partition is an extended system, and is sdb2. The third partition, according to GParted, seems to be nested under the second. This is the swap partition, and it is sdb5 The fourth partition is my home partition and is sdb6 and is also nested under the extended system. The first and fourth partitions are ext4. I don't know if that helps, but the more info, the better accuracy, generally. Thanks. EDIT: I tried reinstalling GRUB on the drive, but that didn't work. However, when I reinstalled GRUB on my laptop, I did it with my USB thumbdrive in. This caused the GRUB updater to find the /boot folder and add the proper details into my laptop's GRUB loader. I could log into CrunchBang from my laptop's GRUB but I was still unable to boot directly to the drive. It looked like my BIOS is unable to find the bootloader. I am unable to install GRUB to a partition I just created, a /boot partition at the start of the drive, GRUB just doesn't allow it. I think I'm going to have to reinstall #! on my drive, which won't be a great loss as I haven't put much time into it.

  Read the article

• Reading a ZFS USB drive with Mac OS X Mountain Lion

  - by Karim Berrah

  The problem: I'm using a MacBook, mainly with Solaris 11, but something with Mac OS X (ML). The only missing thing is that Mac OS X can't read my external ZFS based USB drive, where I store all my data. So, I decided to look for a solution. Possible solution: I decided to use VirtualBox with a Solaris 11 VM as a passthrough to my data. Here are the required steps: Installing a Solaris 11 VM Install VirtualBox on your Mac OS X, add the extension pack (needed for USB) Plug your ZFS based USB drive on your Mac, ignore it when asked to initialize it. Create a VM for Solaris (bridged network), and before installing it, create a USB filter (in the settings of your Vbox VM, go to Ports, then USB, then add a new USB filter from the attached device "grey usb-connector logo with green plus sign")  Install a Solaris 11 VM, boot it, and install the Guest addition check with "ifconfg -a" the IP address of your Solaris VM Creating a path to your ZFS USB drive In MacOS X, use the "Disk Utility" to unmount the USB attached drive, and unplug the USB device. Switch back to VirtualBox, select the top of the window where your Solaris 11 is running plug your ZFS USB drive, select "ignore" if Mac OS invite you to initialize the disk In the VirtualBox VM menu, go to "Devices" then "USB Devices" and select from the dropping menu your "USB device" Connection your Solaris VM to the USB drive Inside Solaris, you might now check that your device is accessible by using the "format" cli command If not, repeat previous steps Now, with root privilege, force a zpool import -f myusbdevicepoolname because this pool was created on another system check that you see your new pool with "zpool status" share your pool with NFS: share -F NFS /myusbdevicepoolname Accessing the USB ZFS drive from Mac OS X This is the easiest step: access an NFS share from mac OS Create a "ZFSdrive" folder on your MacOS desktop from a terminal under mac OS: mount -t nfs IPadressofMySoalrisVM:/myusbdevicepoolname  /Users/yourusername/Desktop/ZFSdrive et voila ! you might access your data, on a ZFS USB drive, directly from your Mountain Lion Desktop. You might play with the share rights in order to alter any read/write rights as needed. You might activate compression, encryption inside the Solaris 11 VM ...

  Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >