Search Results

Search found 4501 results on 181 pages for 'interesting'.

Page 170/181 | < Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >

• Big data: An evening in the life of an actual buyer

  - by Jean-Pierre Dijcks

  Here I am, and this is an actual story of one of my evenings, trying to spend money with a company and ultimately failing. I just gave up and bought a service from another vendor, not the incumbent. Here is that story and how I think big data could actually fix this (and potentially prevent some of this from happening). In the end this story should illustrate how big data can benefit me (get me what I want without causing grief) and the company I am trying to buy something from. Note: Lots of details left out, I have no intention of being the annoyed blogger moaning about a specific company. What did I want to get? We watch TV, we have internet and we do have a land line. The land line is from a different vendor then the TV and the internet. I have decided that this makes no sense and I was going to get a bundle (no need to infer who this is, I just picked the generic bundle word as this is what I want to get) of all three services as this seems to save me money. I also want to not talk to people, I just want to click on a website when I feel like it and get it all sorted. I do think that is reality. I want to just do my shopping at 9.30pm while watching silly reruns on TV. Problem 1 - Bad links So, I'm an existing customer of the company I want to buy my bundle from. I go to the website, I click on offers. Turns out they are offers for new customers. After grumbling about how good they are, I click on offers for existing customers. Bummer, it goes to offers for new customers, so I click again on the link for offers for existing customers. No cigar... it just does not work. Big data solutions: 1) Do not show an existing customer the offers for new customers unless they are the same => This is only partially doable without login, but if a customer logs in the application should always know that this is an existing customer. But in general, imagine I do this from my home going through the internet service of this vendor to their domain... an instant filter should move me into the "existing customer route". 2) Flag dead or incorrect links => I've clicked the link for "existing customer offers" at least 3 times in under 5 seconds... Identifying patterns like this is easy in Hadoop and can very quickly make a list of potentially incorrect links. No need for realtime fixing, just the fact that this link can be pro-actively fixed across my entire web domain is a good thing. Preventative maintenance! Problem 2 - Purchase cannot be completed Apart from the fact that the browsing pattern to actually get to what I want is poorly designed, my purchase never gets past a specific point. In other words, I put something into my shopping cart and when I want to move on the application either crashes (with me going to an error page) or hangs or goes into something like chat. So I try again, and again and again. I think I tried this entire path (while being logged in!!) at least 10 times over the course of 20 minutes. I also clicked on the feedback button and, frustrated as I was, tried to explain this did not work... Big Data Solutions: 1) This web site does shopping cart analysis. I got an email next day stating I have things in my shopping cart, just click here to complete my purchase. After the above experience, this just added insult to my pain... 2) What should have happened, is a Hadoop job going over all logged in customers that are on the buy flow. It should flag anyone who is trying (multiple attempts from the same user to do the same thing), analyze the shopping card, the clicks to identify what the customers wants, his feedback provided (note: always own your own website feedback, never just farm this out!!) and in a short turn around time (30 minutes to 2 hours or so) email me with a link to complete my purchase. Not with a link to my shopping cart 12 hours later, but a link to actually achieve what I wanted... Why should this company go through the big data effort? I do believe this is relatively easy to do using our Oracle Event Processing and Big Data Appliance solutions combined. It is almost so simple (to my mind) that it makes no sense that this is not in place? But, now I am ranting... Why is this interesting? It is because of $$$$. After trying really hard, I mean I did this all in the evening, and again in the morning before going to work. I kept on failing, But I really wanted this to work... so an email that said, sorry, we noticed you tried to get a bundle (the log knows what I wanted, where I failed, so easy to generate), here is the link to click and complete your purchase. And here is 2 movies on us as an apology would have kept me as a customer, and got the additional $$$$ per month for the next couple of years. It would also lead to upsell on my phone package etc. Instead, I went to a completely different company, bought service from them. Lost money for company A, negative sentiment for company A and me telling this story at the water cooler so I'm influencing more people to think negatively about company A. All in all, a loss of easy money, a ding in sentiment and image where a relatively simple solution exists and can be in place on the software I describe routinely in this blog... For those who are coming to Openworld and maybe see value in solving the above, or are thinking of how to solve this, come visit us in Moscone North - Oracle Red Lounge or in the Engineered Systems Showcase.

  Read the article

• Making Those PanelBoxes Behave

  - by Duncan Mills

  I have a little problem to solve earlier this week - misbehaving <af:panelBox> components... What do I mean by that? Well here's the scenario, I have a page fragment containing a set of panelBoxes arranged vertically. As it happens, they are stamped out in a loop but that does not really matter. What I want to be able to do is to provide the user with a simple UI to close and open all of the panelBoxes in concert. This could also apply to showDetailHeader and similar items with a disclosed attrubute, but in this case it's good old panelBoxes.  Ok, so the basic solution to this should be self evident. I can set up a suitable scoped managed bean that the panelBoxes all refer to for their disclosed attribute state. Then the open all / close commandButtons in the UI can simply set the state of that bean for all the panelBoxes to pick up via EL on their disclosed attribute. Sound OK? Well that works basically without a hitch, but turns out that there is a slight problem and this is where the framework is attempting to be a little too helpful. The issue is that is the user manually discloses or hides a panelBox then that will override the value that the EL is setting. So for example. I start the page with all panelBoxes collapsed, all set by the EL state I'm storing on the session I manually disclose panelBox no 1. I press the Expand All button - all works as you would hope and all the panelBoxes are now disclosed, including of course panelBox 1 which I just expanded manually. Finally I press the Collapse All button and everything collapses except that first panelBox that I manually disclosed.  The problem is that the component remembers this manual disclosure and that overrides the value provided by the expression. If I change the viewId (navigate away and back) then the panelBox will start to behave again, until of course I touch it again! Now, the more astute amoungst you would think (as I did) Ah, sound like the MDS personalizaton stuff is getting in the way and the solution should simply be to set the dontPersist attribute to disclosed | ALL. Alas this does not fix the issue.  After a little noodling on the best way to approach this I came up with a solution that works well, although if you think of an alternative way do let me know. The principle is simple. In the disclosureListener for the panelBox I take a note of the clientID of the panelBox component that has been touched by the user along with the state. This all gets stored in a Map of Booleans in ViewScope which is keyed by clientID and stores the current disclosed state in the Boolean value.  The listener looks like this (it's held in a request scope backing bean for the page): public void handlePBDisclosureEvent(DisclosureEvent disclosureEvent) { String clientId = disclosureEvent.getComponent().getClientId(FacesContext.getCurrentInstance()); boolean state = disclosureEvent.isExpanded(); pbState.addTouchedPanelBox(clientId, state); } The pbState variable referenced here is a reference to the bean which will hold the state of the panelBoxes that lives in viewScope (recall that everything is re-set when the viewid is changed so keeping this in viewScope is just fine and cleans things up automatically). The addTouchedPanelBox() method looks like this: public void addTouchedPanelBox(String clientId, boolean state) { //create the cache if needed this is just a Map<String,Boolean> if (_touchedPanelBoxState == null) { _touchedPanelBoxState = new HashMap<String, Boolean>(); } // Simply put / replace _touchedPanelBoxState.put(clientId, state); } So that's the first part, we now have a record of every panelBox that the user has touched. So what do we do when the Collapse All or Expand All buttons are pressed? Here we do some JavaScript magic. Basically for each clientID that we have stored away, we issue a client side disclosure event from JavaScript - just as if the user had gone back and changed it manually. So here's the Collapse All button action: public String CloseAllAction() { submitDiscloseOverride(pbState.getTouchedClientIds(true), false); _uiManager.closeAllBoxes(); return null; }  The _uiManager.closeAllBoxes() method is just manipulating the master-state that all of the panelBoxes are bound to using EL. The interesting bit though is the line:  submitDiscloseOverride(pbState.getTouchedClientIds(true), false); To break that down, the first part is a call to that viewScoped state holder to ask for a list of clientIDs that need to be "tweaked": public String getTouchedClientIds(boolean targetState) { StringBuilder sb = new StringBuilder(); if (_touchedPanelBoxState != null && _touchedPanelBoxState.size() > 0) { for (Map.Entry<String, Boolean> entry : _touchedPanelBoxState.entrySet()) { if (entry.getValue() == targetState) { if (sb.length() > 0) { sb.append(','); } sb.append(entry.getKey()); } } } return sb.toString(); } You'll notice that this method only processes those panelBoxes that will be in the wrong state and returns those as a comma separated list. This is then processed by the submitDiscloseOverride() method: private void submitDiscloseOverride(String clientIdList, boolean targetDisclosureState) { if (clientIdList != null && clientIdList.length() > 0) { FacesContext fctx = FacesContext.getCurrentInstance(); StringBuilder script = new StringBuilder(); script.append("overrideDiscloseHandler('"); script.append(clientIdList); script.append("',"); script.append(targetDisclosureState); script.append(");"); Service.getRenderKitService(fctx, ExtendedRenderKitService.class).addScript(fctx, script.toString()); } } This method constructs a JavaScript command to call a routine called overrideDiscloseHandler() in a script attached to the page (using the standard <af:resource> tag). That method parses out the list of clientIDs and sends the correct message to each one: function overrideDiscloseHandler(clientIdList, newState) { AdfLogger.LOGGER.logMessage(AdfLogger.INFO, "Disclosure Hander newState " + newState + " Called with: " + clientIdList); //Parse out the list of clientIds var clientIdArray = clientIdList.split(','); for (var i = 0; i < clientIdArray.length; i++){ var panelBox = flipPanel = AdfPage.PAGE.findComponentByAbsoluteId(clientIdArray[i]); if (panelBox.getComponentType() == "oracle.adf.RichPanelBox"){ panelBox.broadcast(new AdfDisclosureEvent(panelBox, newState)); } }  }  So there you go. You can see how, with a few tweaks the same code could be used for other components with disclosure that might suffer from the same problem, although I'd point out that the behavior I'm working around here us usually desirable. You can download the running example (11.1.2.2) from here. 

  Read the article

• At times, you need to hire a professional.

  - by Phil Factor

  After months of increasingly demanding toil, the development team I belonged to was told that the project was to be canned and the whole team would be fired.  I’d been brought into the team as an expert in the data implications of a business re-engineering of a major financial institution. Nowadays, you’d call me a data architect, I suppose.  I’d spent a happy year being paid consultancy fees solving a succession of interesting problems until the point when the company lost is nerve, and closed the entire initiative. The IT industry was in one of its characteristic mood-swings downwards.  After the announcement, we met in the canteen. A few developers had scented the smell of death around the project already hand had been applying unsuccessfully for jobs. There was a sense of doom in the mass of dishevelled and bleary-eyed developers. After giving vent to anger and despair, talk turned to getting new employment. It was then that I perked up. I’m not an obvious choice to give advice on getting, or passing,  IT interviews. I reckon I’ve failed most of the job interviews I’ve ever attended. I once even failed an interview for a job I’d already been doing perfectly well for a year. The jobs I’ve got have mostly been from personal recommendation. Paradoxically though, from years as a manager trying to recruit good staff, I know a lot about what IT managers are looking for.  I gave an impassioned speech outlining the important factors in getting to an interview.  The most important thing, certainly in my time at work is the quality of the résumé or CV. I can’t even guess the huge number of CVs (résumés) I’ve read through, scanning for candidates worth interviewing.  Many IT Developers find it impossible to describe their  career succinctly on two sides of paper.  They leave chunks of their life out (were they in prison?), get immersed in detail, put in irrelevancies, describe what was going on at work rather than what they themselves did, exaggerate their importance, criticize their previous employers, aren’t  aware of the important aspects of a role to a potential employer, suffer from shyness and modesty,  and lack any sort of organized perspective of their work. There are many ways of failing to write a decent CV. Many developers suffer from the delusion that their worth can be recognized purely from the code that they write, and shy away from anything that seems like self-aggrandizement. No.  A resume must make a good impression, which means presenting the facts about yourself in a clear and positive way. You can’t do it yourself. Why not have your resume professionally written? A good professional CV Writer will know the qualities being looked for in a CV and interrogate you to winkle them out. Their job is to make order and sense out of a confused career, to summarize in one page a mass of detail that presents to any recruiter the information that’s wanted. To stand back and describe an accurate summary of your skills, and work-experiences dispassionately, without rancor, pity or modesty. You are no more capable of producing an objective documentation of your career than you are of taking your own appendix out.  My next recommendation was more controversial. This is to have a professional image overhaul, or makeover, followed by a professionally-taken photo portrait. I discovered this by accident. It is normal for IT professionals to face impossible deadlines and long working hours by looking more and more like something that had recently blocked a sink. Whilst working in IT, and in a state of personal dishevelment, I’d been offered the role in a high-powered amateur production of an old ex- Broadway show, purely for my singing voice. I was supposed to be the presentable star. When the production team saw me, the air was thick with tension and despair. I was dragged kicking and protesting through a succession of desperate grooming, scrubbing, dressing, dieting. I emerged feeling like “That jewelled mass of millinery, That oiled and curled Assyrian bull, Smelling of musk and of insolence.” (Tennyson Maud; A Monodrama (1855) Section v1 stanza 6) I was then photographed by a professional stage photographer.  When the photographs were delivered, I was amazed. It wasn’t me, but it looked somehow respectable, confident, trustworthy.   A while later, when the show had ended, I took the photos, and used them for work. They went with the CV to job applications. It did the trick better than I could ever imagine.  My views went down big with the developers. Old rivalries were put immediately to one side. We voted, with a show of hands, to devote our energies for the entire notice period to getting employable. We had a team sourcing the CV Writer,  a team organising the make-overs and photographer, and a third team arranging  mock interviews. A fourth team determined the best websites and agencies for recruitment, with the help of friends in the trade.  Because there were around thirty developers, we were in a good negotiating position.  Of the three CV Writers we found who lived locally, one proved exceptional. She was an ex-journalist with an eye to detail, and years of experience in manipulating language. We tried her skills out on a developer who seemed a hopeless case, and he was called to interview within a week.  I was surprised, too, how many companies were experts at image makeovers. Within the month, we all looked like those weird slick  people in the ‘Office-tagged’ stock photographs who stare keenly and interestedly at PowerPoint slides in sleek chromium-plated high-rise offices. The portraits we used still adorn the entries of many of my ex-colleagues in LinkedIn. After a months’ worth of mock interviews, and technical Q&A, our stutters, hesitations, evasions and periphrastic circumlocutions were all gone.  There is little more to relate. With the résumés or CVs, mugshots, and schooling in how to pass interviews, we’d all got new and better-paid jobs well  before our month’s notice was ended. Whilst normally, an IT team under the axe is a sad and depressed place to belong to, this wonderful group of people had proved the power of organized group action in turning the experience to advantage. It left us feeling slightly guilty that we were somehow cheating, but I guess we were merely leveling the playing-field.

  Read the article

• Chart Filtering

  - by Tim Dexter

  Interesting question from a colleague this week. Can you add a filter to a chart to just show a specific set of data? In an RTF template, you need to do a little finagling in the chart definition. In an online template, a couple of clicks and you're done. RTF Build your chart as you would normally to include all the data to start with. Now flip to the Advanced tab to see the code behind the chart. Its not very pretty but with a little effort you can get it looking a little more friendly. Here's my chart showing employees and their salaries. <Graph depthAngle="50" depthRadius="8" seriesEffect="SE_AUTO_GRADIENT"> <LegendArea visible="true"/>  <Title text="Executive Department Only" visible="true" horizontalAlignment="CENTER"/>  <LocalGridData colCount="{count(.//G_2)}" rowCount="1">   <RowLabels>    <Label>SALARY</Label>   </RowLabels>   <ColLabels>    <xsl:for-each select=".//G_2">     <Label><xsl:value-of select="EMP_NAME"/></Label>    </xsl:for-each>   </ColLabels>   <DataValues>    <RowData>     <xsl:for-each select=".//G_2">      <Cell><xsl:value-of select="SALARY"/></Cell>     </xsl:for-each>    </RowData>   </DataValues>  </LocalGridData> </Graph> Note the emboldened text. Its currently grabbing all values in the G_2 level of the data. We can use an XPATH expression to filter the data to the set we want to see. In my case I want to only see the employees that are in the Executive department. My  data is structured thus:   <DATA_DS>     <G_1>         <DEPARTMENT_NAME>Accounting</DEPARTMENT_NAME>         <G_2>             <MANAGER>Higgins</MANAGER>             <EMPLOYEE_ID>206</EMPLOYEE_ID>             <HIRE_DATE>2002-06-07T00:00:00.000-04:00</HIRE_DATE>             <SALARY>8300</SALARY>             <JOB_TITLE>Public Accountant</JOB_TITLE>             <PARAS>11000</PARAS>             <EMP_NAME>William Gietz</EMP_NAME>         </G_2> So the XPATH expression Im going to use to limit the data to the Executive department would be .//G_2[../DEPARTMENT_NAME='Executive'] Note the ../ moves the parser up the XML tree to be able to test the DEPARTMENT_NAME value. I added this XPATH expression to the three instances that need it ColCount, ColLabels and RowData. Its simple enough to do. Testing your XPATH expression is easier to do using a table of data. Please note, as soon as you make changes to the chart code. Going back to the Builder tab, you'll find that everything is grayed out. I recommend you make all the changes you can via the chart dialog before updating the code. Online Template Implementing the filter is much simpler, there is a dialog box to help you out. Add you chart and fill out the various data points you want to show. then hit the Filter item in the ribbon above the chart. That will pop the filter dialog box where you can then add a filter to the chart.   You can add multiple filters if needed and of course you can use the Manage Filters button to re-open and edit the filters. Pretty straightforward stuff!

  Read the article

• Nokia Windows Phone 8 App Collection

  - by Tim Murphy

  I recently upgraded to a Nokia Lumia 920.  Along with it came the availability of a number of Nokia developed apps or apps that Nokia has made available from other developers.  Below is a summary of some of the ones that I have used to this point.  There are quite a few of them so I won’t be covering everything that is available. Nokia Maps I am quite pleased with the accuracy of Nokia Maps and not having to tap the screen for each turn any more.  The information on the screen is quite good as well.  The couple of improvements I would like to see are for the voice directions to include which street or exit you need to use and improve the search accuracy.  Bing maps had much better search results in my opinion. Nokia Drive This one really had me confused when I first setup the phone.  I was driving down the road and suddenly I am getting notification tones, but there were no visual notifications on the phone.  It seems that in their infinite wisdom Nokia thinks I don’t know when I am going over the speed limit and need to be told. ESPN I really liked my ESPN app on Windows Phone 7.5, but I am not getting the type of experience I was looking for out of this app.  While it allows me to pick my favorite teams, but there isn’t a pivot page or panorama page that shows a summary of my favorite teams.  I have also found that the live tile don’t update very often.  Over all I am rather disappointed compared app produced by ESPN. Smart Shoot I really need to get the kids to let me use this on.  I like the concept, but I need to spend more time with it.  The idea how running the camera through a continuous shooting mode and then picking the best is something that I have done with my DSLR and am glad to see it available here. Cinemagraph Here is a fun filter.  It doesn’t have the most accurate editing features, but it is fun to stop certain parts of a scene and let other parts move.  As a test I stopped the traffic on the highway and let the traffic on the frontage road flow.  It makes for a fun effect.  If nothing else it could be great for sending prank animations to your friends. YouSendIt I have only briefly touched this application.  What I don’t understand is why it is needed.  Most of the functionality seems to be similar to SkyDrive and it gives you less storage.  They only feature that seems to differentiate the app is the signature capability. Creative Studio This app has some nice quick edits, but it is not very comprehensive.  I am also not to thrilled with the user experience.  It puts you though an initial color cast series that I’m not sure why it is there.  Discovery of the remaining adjustments isn’t that great.  In the end I found myself wanting Thumbia back. Panorama This is one of the apps that I like.  I found it easy to use as it guides you with a target circle that you center for it to take the next pictures.  It also stitches the images with amazing speed.  The one thing I wish it had was the capability to turn the phone into portrait orientation and do a taller panorama.  Perhaps we will see this in the future. Nokia Music After getting over the missing album art I found that there were a number of missing features with this app as well.  I have a Zune HD and I am used to being able to go through my collection and adding songs, albums or artists to my now playing.  There also doesn’t seem to be a way to manage playlists that I have seen yet.  Other than that the UI is familiar and it give Nokia City Lens Augmented reality is a cool concept, but I still haven’t seen it implemented in a compelling fashion beyond a demo at TED a couple of years ago.  The app still leaves me wanting as well.  It does give an interesting toy.  It gives you the ability to look for general categories and see general direction and clusters of locations.  I think as this concept is better thought out it will become more compelling. Nokia Trailers I don’t know how often I will use this app, but I do like being able to see what movies are being promoted.  I can’t wait for The Hobbit to come out and the trailer was just what the doctor ordered.  I can see coming back to this app from time to time. PhotoBeamer PhotoBeamer is a strange beast that needs a better instruction manual.  It seems a lot like magic but very confusing.  I need some more testing, but I don’t think this is something that most people are going to understand quickly and may give up before getting it to work.  I may put an update here after playing with it further. Ringtone Maker The app was just published and it didn’t work very well for me. It couldn’t find 95% of the songs that Nokia Music was playing for me and crashed several times.  It also had songs named wrong that when I checked them in Nokia Music they were fine.  This app looks like it has a long way to go. Summary In all I think that Nokia is offering a well rounded set of initial applications that can get any new owner started.  There is definitely room for improvement in all of these apps.  The main need is usability upgrades.  I would guess that with feedback from users they will come up to acceptable levels.  Try them out and see if you agree. del.icio.us Tags: Windows Phone,Nokia,Lumia,Nokia Apps,ESPN,PhotoBeamer,City Lens,YouSendIt,Drive,Maps

  Read the article

• Troubleshooting Windows Authentication problems (no challenge) in IIS 7.5?

  - by Aaronaught

  I know that there are thousands of reports of people having trouble getting Integrated Windows Authentication to work with IIS, but they all seem to lead to web pages that don't apply or solutions that I've already tried. I've deployed dozens of sites like this before, so either there's something bizarre going on with the server/configuration, or I've been looking at this too long and not seeing the obvious. Simply put, everything works perfectly on my local machine, but falls apart on the production server, which as far as I can tell has the exact same configuration. On the local machine: The machine is running Windows 7 Ultimate, Service Pack 1, IIS 7.5. The site has been tested successfully, using both IIS and the VS Web Development Server. The IIS site config has all authentication methods disabled except Windows Authentication. The local machine is not on any domain. The Providers set up are Negotiate and NTLM (not Negotiate:Kerberos). Extended Protection is Off. All browsers tested (IE, Firefox, Chrome) show the challenge prompt and allow me to log in to the localhost domain with my (local) Windows account. All browsers tested also work using an opaque local IP address - so the browsers themselves don't seem to care whether the site appears "local" or "remote". I've added a display line to the web page which shows the currently-logged-in user and it shows exactly what I would expect (whichever local user I logged in with). On the remote machine: The server is running Windows Server 2008 R2, IIS 7.5. Loading the web page results in an immediate 401.2 error: You are not authorized to view this page due to invalid authentication headers. No challenge prompt ever appears. The IIS site config has all authentication methods disabled except Windows Authentication. The remote machine is not on any domain. The Providers set up are Negotiate and NTLM (not Negotiate:Kerberos). Extended Protection is Off. On the remote machine (remote desktop session), the same error appears in Internet Explorer regardless of whether the domain is localhost or the external IP address. If I try to view the remote web site from my local machine, the error is still 401, but a slightly different 401. No subcode, with the text: Access is denied due to invalid credentials. The Windows Authentication IIS role feature is installed. The WindowsAuthentication Module is added (at the Server level). The exact same error occurs if I turn off Windows Authentication and enable Basic Authentication. The site does load if I turn off Windows Authentication and enable Anonymous (obviously). I've already followed all of the troubleshooting steps on Microsoft Support: Troubleshooting HTTP 401 errors in IIS I've already tried the workaround shown on another Microsoft support page (supposedly to force NTLM as the only method). Last but not least, I tried turning on FREB for 401.2 errors and the results don't seem to tell me anything useful, all I see is the following warning: MODULE_SET_RESPONSE_ERROR_STATUS ModuleName IIS Web Core Notification 2 HttpStatus 401 HttpReason Unauthorized HttpSubStatus 2 ErrorCode 2147942405 ConfigExceptionInfo Notification AUTHENTICATE_REQUEST ErrorCode Access is denied. (0x80070005) ...this seems to just be telling me what I already know (that it's simply rejecting the request instead of negotiating the credentials). The trace does indicate that the WindowsAuthentication module is correctly loaded because there is a NOTIFY_MODULE_START line with ModuleName = WindowsAuthentication (and various other ASP.NET follow-up events - [un]fortunately, no interesting errors or warnings here). Can anyone tell me what I might be missing here? Quick Update: I'm a little uncomfortable sending a whole Wireshark dump as it would reveal IPs, URLs and other stuff, but I did a side-by-side comparison of the HTTP responses from localhost and the remote server in Fiddler, and it seems fairly self-evident what the problem is: Localhost: HTTP/1.1 401 Unauthorized Cache-Control: private Content-Type: text/html; charset=utf-8 Server: Microsoft-IIS/7.5 WWW-Authenticate: Negotiate WWW-Authenticate: NTLM X-Powered-By: ASP.NET Date: Sat, 17 Dec 2011 23:42:34 GMT Content-Length: 6399 Proxy-Support: Session-Based-Authentication Remote: HTTP/1.1 401 Unauthorized Content-Type: text/html Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET Date: Sat, 17 Dec 2011 23:43:13 GMT Content-Length: 1293 Aside from a few seemingly-inconsequential differences like cache-control, the main difference is that the remote server is not sending the WWW-Authenticate headers back to the client. So, I guess that narrows the question down to: Why is IIS not sending WWW-Authenticate headers when Windows Authentication appears to be installed, loaded, and exclusively enabled?

  Read the article

• boost fusion: strange problem depending on number of elements on a vector

  - by ChAoS

  I am trying to use Boost::Fusion (Boost v1.42.0) in a personal project. I get an interesting error with this code: #include "boost/fusion/include/sequence.hpp" #include "boost/fusion/include/make_vector.hpp" #include "boost/fusion/include/insert.hpp" #include "boost/fusion/include/invoke_procedure.hpp" #include "boost/fusion/include/make_vector.hpp" #include <iostream> class Class1 { public: typedef boost::fusion::vector<int,float,float,char,int,int> SequenceType; SequenceType s; Class1(SequenceType v):s(v){} }; class Class2 { public: Class2(){} void met(int a,float b ,float c ,char d ,int e,int f) { std::cout << a << " " << b << " " << c << " " << d << " " << e << std::endl; } }; int main(int argn, char**) { Class2 p; Class1 t(boost::fusion::make_vector(9,7.66f,8.99f,'s',7,6)); boost::fusion::begin(t.s); //OK boost::fusion::insert(t.s, boost::fusion::begin(t.s), &p); //OK boost::fusion::invoke_procedure(&Class2::met,boost::fusion::insert(t.s, boost::fusion::begin(t.s), &p)); //FAILS } It fails to compile (gcc 4.4.1): In file included from /home/thechaos/Escriptori/of_preRelease_v0061_linux_FAT/addons/ofxTableGestures/ext/boost/fusion/include/invoke_procedur e.hpp:10, from problema concepte.cpp:11: /home/thechaos/Escriptori/of_preRelease_v0061_linux_FAT/addons/ofxTableGestures/ext/boost/fusion/functional/invocation/invoke_procedure.hpp: I n function ‘void boost::fusion::invoke_procedure(Function, const Sequence&) [with Function = void (Class2::*)(int, float, float, char, int, in t), Sequence = boost::fusion::joint_view<boost::fusion::joint_view<boost::fusion::iterator_range<boost::fusion::vector_iterator<const boost::f usion::vector<int, float, float, char, int, int, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_>, 0>, boost::fusion::vector_iterator<boost::fusion::vector<int, float, float, char, int, int, boost::fusion::void_, boost::fusion::void_, boost::fus ion::void_, boost::fusion::void_>, 0> >, const boost::fusion::single_view<Class2*> >, boost::fusion::iterator_range<boost::fusion::vector_iter ator<boost::fusion::vector<int, float, float, char, int, int, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion: :void_>, 0>, boost::fusion::vector_iterator<const boost::fusion::vector<int, float, float, char, int, int, boost::fusion::void_, boost::fusion ::void_, boost::fusion::void_, boost::fusion::void_>, 6> > >]’: problema concepte.cpp:39: instantiated from here /home/thechaos/Escriptori/of_preRelease_v0061_linux_FAT/addons/ofxTableGestures/ext/boost/fusion/functional/invocation/invoke_procedure.hpp:88 : error: incomplete type ‘boost::fusion::detail::invoke_procedure_impl<void (Class2::*)(int, float, float, char, int, int), const boost::fusio n::joint_view<boost::fusion::joint_view<boost::fusion::iterator_range<boost::fusion::vector_iterator<const boost::fusion::vector<int, float, f loat, char, int, int, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_>, 0>, boost::fusion::vector_itera tor<boost::fusion::vector<int, float, float, char, int, int, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion:: void_>, 0> >, const boost::fusion::single_view<Class2*> >, boost::fusion::iterator_range<boost::fusion::vector_iterator<boost::fusion::vector< int, float, float, char, int, int, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_, boost::fusion::void_>, 0>, boost::fusion: :vector_iterator<const boost::fusion::vector<int, float, float, char, int, int, boost::fusion::void_, boost::fusion::void_, boost::fusion::voi d_, boost::fusion::void_>, 6> > >, 7, true, false>’ used in nested name specifier However, if I change the number of arguments in the vectors and the method from 6 to 5 from int,float,float,char,int,int to int,float,float,char,int,I can compile it without problems. I suspected about the maximum number of arguments being a limitation, but I tried to change it through defining FUSION_MAX_VECTOR_SIZE without success. I am unable to see what am I doing wrong. Can you reproduce this? Can it be a boost bug (i doubt it but is not impossible)?

  Read the article

• NLP with greatly contrained input and abilities

  - by Mike F

  Hat in hand here. I'm a seasoned developer and I would be grateful for a bit of help. I don't have time to read or digest long intricate discussions on theoretical concepts around NLP (or go get my PHD). That said, I have read a few and it's a damn interesting field. The problem is I need real world solutions, for real world products, in real world time frames. The problem I'm having is right now I'm not sure what the right questions are to ask to get started implementing. I believe this is mostly related to vocabulary. I'll read somewhere, a blog post, a forum post, a whitepaper, and it says, I'm doing flooping with the blargy blarg method, and I go google flooping and blargy blarg, and I get references to more obscurity. It seemingly never ends. So, my question is multiphased. First, more generally, how do I become passingly educated on this quickly? Just in time educated. I only need to know what I need to know to take the next step. I've spent 20 years writing code. Explain quick. I'll get it. (I mean provide a reference to something that explains quickly of course). I'm happy to read the right book, but I don't want to read a book where I read the chapter introduction that explains what floopy floop is and then skip over the rest of the chapter with examples of floopy flooping (because now I get what it is). I also don't want to read a book that goes into too much detail with theoretical underpinnings or history. For example, the Jurafsky book seems like way more than I need: http://www.amazon.com/gp/product/0131873210. But I will read it if this is the right book to read. (It's also dang expensive!) I need the root node of the expedited learning tree here, if you will. Point me in the right direction and I'll be quite grateful. I'm expecting quite a lot of firehose drinking - I just need the right firehose. Second, what I need to do is take a single sentence, with a very reduced vocabulary, and get a grammar tree (sorry if this is the wrong terminology) that I can do something with. I know I could easily write this command line input style in c in a more conventional manner, but I need it to be way better than that. But I don't need a chatterbot either. What I'm doing needs to live in a constrained environment. I can't use Python (unfortunately). I can't ship with gigabytes of corpuses. I need any libraries I use to be in c/c++. If I have to write this myself, I will. Hopefully, it will be achievable considering the reduced problem set. Maybe, probably, that's just naive. If so, let me know. :-) Thanks in advance - Mike

  Read the article

• ADO.NET (WCF) Data Services Query Interceptor Hangs IIS

  - by PreMagination

  I have an ADO.NET Data Service that's supposed to provide read-only access to a somewhat complex database. Logically I have table-per-type (TPT) inheritance in my data model but the EDM doesn't implement inheritance. (Limitation of EF and navigation properties on derived types. STILL not fixed in EF4!) I can query my EDM directly (using a separate project) using a copy of the query I'm trying to run against the web service, results are returned within 10 seconds. Disabling the query interceptors I'm able to make the same query against the web service, results are returned similarly quickly. I can enable some of the query interceptors and the results are returned slowly, up to a minute or so later. Alternatively, I can enable all the query interceptors, expand less of the properties on the main object I'm querying, and results are returned in a similar period of time. (I've increased some of the timeout periods) Up til this point Sql Profiler indicates the slow-down is the database. (That's a post for a different day) But when I enable all my query interceptors and expand all the properties I'd like to have the IIS worker process pegs the CPU for 20 minutes and a query is never even made against the database. This implies to me that yes, my implementation probably sucks but regardless the Data Services "tier" is having an issue it shouldn't. WCF tracing didn't reveal anything interesting to my untrained eye. Details: Data model: Agent-Person-Student Student has a collection of referrals Students and referrals are private, queries against the web service should only return "your" students and referrals. This means Person and Agent need to be filtered too. Other entities (Agent-Organization-School) can be accessed by anyone who has authenticated. The existing security model is poorly suited to perform this type of filtering for this type of data access, the query interceptors are complicated and cause EF to generate some entertaining sql queries. Sample Interceptor [QueryInterceptor("Agents")] public Expression<Func<Agent, Boolean>> OnQueryAgents() { //Agent is a Person(1), Educator(2), Student(3), or Other Person(13); allow if scope permissions exist return ag => (ag.AgentType.AgentTypeId == 1 || ag.AgentType.AgentTypeId == 2 || ag.AgentType.AgentTypeId == 3 || ag.AgentType.AgentTypeId == 13) && ag.Person.OrganizationPersons.Count<OrganizationPerson>(op => op.Organization.ScopePermissions.Any<ScopePermission> (p => p.ApplicationRoleAccount.Account.UserName == HttpContext.Current.User.Identity.Name && p.ApplicationRoleAccount.Application.ApplicationId == 124) || op.Organization.HierarchyDescendents.Any<OrganizationsHierarchy>(oh => oh.AncestorOrganization.ScopePermissions.Any<ScopePermission> (p => p.ApplicationRoleAccount.Account.UserName == HttpContext.Current.User.Identity.Name && p.ApplicationRoleAccount.Application.ApplicationId == 124))) > 0; } The query interceptors for Person, Student, Referral are all very similar, ie they traverse multiple same/similar tables to look for ScopePermissions as above. Sample Query var referrals = (from r in service.Referrals .Expand("Organization/ParentOrganization") .Expand("Educator/Person/Agent") .Expand("Student/Person/Agent") .Expand("Student") .Expand("Grade") .Expand("ProblemBehavior") .Expand("Location") .Expand("Motivation") .Expand("AdminDecision") .Expand("OthersInvolved") where r.DateCreated >= coupledays && r.DateDeleted == null select r); Any suggestions or tips would be greatly associated, for fixing my current implementation or in developing a new one, with the caveat that the database can't be changed and that ultimately I need to expose a large portion of the database via a web service that limits data access to the data authorized for, for the purpose of data integration with multiple outside parties. THANK YOU!!!

  Read the article

• Load-balancing between a Procurve switch and a server

  - by vlad

  Hello I've been searching around the web for this problem i've been having. It's similar in a way to this question: How exactly & specifically does layer 3 LACP destination address hashing work? My setup is as follows: I have a central switch, a Procurve 2510G-24, image version Y.11.16. It's the center of a star topology, there are four switches connected to it via a single gigabit link. Those switches service the users. On the central switch, I have a server with two gigabit interfaces that I want to bond together in order to achieve higher throughput, and two other servers that have single gigabit connections to the switch. The topology looks as follows: sw1 sw2 sw3 sw4 | | | | --------------------- | sw0 | --------------------- || | | srv1 srv2 srv3 The servers were running FreeBSD 8.1. On srv1 I set up a lagg interface using the lacp protocol, and on the switch I set up a trunk for the two ports using lacp as well. The switch showed that the server was a lacp partner, I could ping the server from another computer, and the server could ping other computers. If I unplugged one of the cables, the connection would keep working, so everything looked fine. Until I tested throughput. There was only one link used between srv1 and sw0. All testing was conducted with iperf, and load distribution was checked with systat -ifstat. I was looking to test the load balancing for both receive and send operations, as I want this server to be a file server. There were therefore two scenarios: iperf -s on srv1 and iperf -c on the other servers iperf -s on the other servers and iperf -c on srv1 connected to all the other servers. Every time only one link was used. If one cable was unplugged, the connections would keep going. However, once the cable was plugged back in, the load was not distributed. Each and every server is able to fill the gigabit link. In one-to-one test scenarios, iperf was reporting around 940Mbps. The CPU usage was around 20%, which means that the servers could withstand a doubling of the throughput. srv1 is a dell poweredge sc1425 with onboard intel 82541GI nics (em driver on freebsd). After troubleshooting a previous problem with vlan tagging on top of a lagg interface, it turned out that the em could not support this. So I figured that maybe something else is wrong with the em drivers and / or lagg stack, so I started up backtrack 4r2 on this same server. So srv1 now uses linux kernel 2.6.35.8. I set up a bonding interface bond0. The kernel module was loaded with option mode=4 in order to get lacp. The switch was happy with the link, I could ping to and from the server. I could even put vlans on top of the bonding interface. However, only half the problem was solved: if I used srv1 as a client to the other servers, iperf was reporting around 940Mbps for each connection, and bwm-ng showed, of course, a nice distribution of the load between the two nics; if I run the iperf server on srv1 and tried to connect with the other servers, there was no load balancing. I thought that maybe I was out of luck and the hashes for the two mac addresses of the clients were the same, so I brought in two new servers and tested with the four of them at the same time, and still nothing changed. I tried disabling and reenabling one of the links, and all that happened was the traffic switched from one link to the other and back to the first again. I also tried setting the trunk to "plain trunk mode" on the switch, and experimented with other bonding modes (roundrobin, xor, alb, tlb) but I never saw any traffic distribution. One interesting thing, though: one of the four switches is a Cisco 2950, image version 12.1(22)EA7. It has 48 10/100 ports and 2 gigabit uplinks. I have a server (call it srv4) with a 4 channel trunk connected to it (4x100), FreeBSD 8.0 release. The switch is connected to sw0 via gigabit. If I set up an iperf server on one of the servers connected to sw0 and a client on srv4, ALL 4 links are used, and iperf reports around 330Mbps. systat -ifstat shows all four interfaces are used. The cisco port-channel uses src-mac to balance the load. The HP should use both the source and destination according to the manual, so it should work as well. Could this mean there is some bug in the HP firmware? Am I doing something wrong?

  Read the article

• How to pre-load all deployed assemblies for an AppDomain

  - by Andras Zoltan

  Given an App Domain, there are many different locations that Fusion (the .Net assembly loader) will probe for a given assembly. Obviously, we take this functionality for granted and, since the probing appears to be embedded within the .Net runtime (Assembly._nLoad internal method seems to be the entry-point when Reflect-Loading - and I assume that implicit loading is probably covered by the same underlying algorithm), as developers we don't seem to be able to gain access to those search paths. My problem is that I have a component that does a lot of dynamic type resolution, and which needs to be able to ensure that all user-deployed assemblies for a given AppDomain are pre-loaded before it starts its work. Yes, it slows down startup - but the benefits we get from this component totally outweight this. The basic loading algorithm I've already written is as follows. It deep-scans a set of folders for any .dll (.exes are being excluded at the moment), and uses Assembly.LoadFrom to load the dll if it's AssemblyName cannot be found in the set of assemblies already loaded into the AppDomain (this is implemented inefficiently, but it can be optimized later): void PreLoad(IEnumerable<string> paths) { foreach(path p in paths) { PreLoad(p); } } void PreLoad(string p) { //all try/catch blocks are elided for brevity string[] files = null; files = Directory.GetFiles(p, "*.dll", SearchOption.AllDirectories); AssemblyName a = null; foreach (var s in files) { a = AssemblyName.GetAssemblyName(s); if (!AppDomain.CurrentDomain.GetAssemblies().Any( assembly => AssemblyName.ReferenceMatchesDefinition( assembly.GetName(), a))) Assembly.LoadFrom(s); } } LoadFrom is used because I've found that using Load() can lead to duplicate assemblies being loaded by Fusion if, when it probes for it, it doesn't find one loaded from where it expects to find it. So, with this in place, all I now have to do is to get a list in precedence order (highest to lowest) of the search paths that Fusion is going to be using when it searches for an assembly. Then I can simply iterate through them. The GAC is irrelevant for this, and I'm not interested in any environment-driven fixed paths that Fusion might use - only those paths that can be gleaned from the AppDomain which contain assemblies expressly deployed for the app. My first iteration of this simply used AppDomain.BaseDirectory. This works for services, form apps and console apps. It doesn't work for an Asp.Net website, however, since there are at least two main locations - the AppDomain.DynamicDirectory (where Asp.Net places it's dynamically generated page classes and any assemblies that the Aspx page code references), and then the site's Bin folder - which can be discovered from the AppDomain.SetupInformation.PrivateBinPath property. So I now have working code for the most basic types of apps now (Sql Server-hosted AppDomains are another story since the filesystem is virtualised) - but I came across an interesting issue a couple of days ago where this code simply doesn't work: the nUnit test runner. This uses both Shadow Copying (so my algorithm would need to be discovering and loading them from the shadow-copy drop folder, not from the bin folder) and it sets up the PrivateBinPath as being relative to the base directory. And of course there are loads of other hosting scenarios that I probably haven't considered; but which must be valid because otherwise Fusion would choke on loading the assemblies. I want to stop feeling around and introducing hack upon hack to accommodate these new scenarios as they crop up - what I want is, given an AppDomain and its setup information, the ability to produce this list of Folders that I should scan in order to pick up all the DLLs that are going to be loaded; regardless of how the AppDomain is setup. If Fusion can see them as all the same, then so should my code. Of course, I might have to alter the algorithm if .Net changes its internals - that's just a cross I'll have to bear. Equally, I'm happy to consider SQL Server and any other similar environments as edge-cases that remain unsupported for now. Any ideas!?

  Read the article

• ASP.NET Membership API not working on Win2008 server/IIS7

  - by Program.X

  I have a very odd problem. I have a web app that uses the .NET Membership API to provide login functionality. This works fine on my local dev machine, using WebDev 4.0 server. I'm using .NET 4.0 with some URL Rewriting, but not on the pages where login is required. I have a Windows Server 2008 with IIS7 However, the Membership API seemingly does not work on the server. I have set up remote debugging and the LoginUser.LoggedIn event of the LoginUser control gets fired okay, but the MembershipUser is null. I get no answer about the username/password being invalid so it seems to be recognising it. If I enter an invalid username/password, I get an invalid username/password response. Some code, if it helps: <asp:ValidationSummary ID="LoginUserValidationSummary" runat="server" CssClass="validation-error-list" ValidationGroup="LoginUserValidationGroup"/> <div class="accountInfo"> <fieldset class="login"> <legend>Account Information</legend> <p> <asp:Label ID="UserNameLabel" runat="server" AssociatedControlID="UserName">Username:</asp:Label> <asp:TextBox ID="UserName" runat="server" CssClass="textEntry"></asp:TextBox> <asp:RequiredFieldValidator ID="UserNameRequired" runat="server" ControlToValidate="UserName" CssClass="validation-error" Display="Dynamic" ErrorMessage="User Name is required." ToolTip="User Name is required." ValidationGroup="LoginUserValidationGroup">*</asp:RequiredFieldValidator> </p> <p> <asp:Label ID="PasswordLabel" runat="server" AssociatedControlID="Password">Password:</asp:Label> <asp:TextBox ID="Password" runat="server" CssClass="passwordEntry" TextMode="Password"></asp:TextBox> <asp:RequiredFieldValidator ID="PasswordRequired" runat="server" ControlToValidate="Password" CssClass="validation-error" Display="Dynamic" ErrorMessage="Password is required." ToolTip="Password is required." ValidationGroup="LoginUserValidationGroup">*</asp:RequiredFieldValidator> </p> <p> <asp:CheckBox ID="RememberMe" runat="server"/> <asp:Label ID="RememberMeLabel" runat="server" AssociatedControlID="RememberMe" CssClass="inline">Keep me logged in</asp:Label> </p> </fieldset> <p class="login-action"> <asp:Button ID="LoginButton" runat="server" CommandName="Login" CssClass="submitButton" Text="Log In" ValidationGroup="LoginUserValidationGroup"/> </p> and the code behind: protected void Page_Load(object sender, EventArgs e) { LoginUser.LoginError += new EventHandler(LoginUser_LoginError); LoginUser.LoggedIn += new EventHandler(LoginUser_LoggedIn); } void LoginUser_LoggedIn(object sender, EventArgs e) { // this code gets run so it appears logins work Roles.DeleteCookie(); // this behaviour has been removed for testing - no difference } void LoginUser_LoginError(object sender, EventArgs e) { HtmlGenericControl htmlGenericControl = LoginUser.FindControl("errorMessageSpan") as HtmlGenericControl; if (htmlGenericControl != null) htmlGenericControl.Visible = true; } I have "Fiddled" with the Login form reponse and I get the following Cookie-Set headers: Set-Cookie: ASP.NET_SessionId=lpyyiyjw45jjtuav1gdu4jmg; path=/; HttpOnly Set-Cookie: .ASPXAUTH=A7AE08E071DD20872D6BBBAD9167A709DEE55B352283A7F91E1066FFB1529E5C61FCEDC86E558CEA1A837E79640BE88D1F65F14FA8434AA86407DA3AEED575E0649A1AC319752FBCD39B2A4669B0F869; path=/; HttpOnly Set-Cookie: .ASPXROLES=; expires=Mon, 11-Oct-1999 23:00:00 GMT; path=/; HttpOnly I don't know what is useful here because it is obviously encrypted but I find the .APXROLES cookie having no value interesting. It seems to fail to register the cookie, but passes authentication

  Read the article

• Why might login failures cause SQL 2005 to dump and ditch?

  - by Byron Sommardahl

  Our SQL 2005 server began timing out and finally stopped responding on Oct 26th. The application logs showed a ton of 17883 events leading up to a reboot. After the reboot everything was fine but we were still scratching our heads. Fast forward 6 days... it happened again. Then again 2 days later. The last night. Today it has happened three times to far. The timeline is fairly predictable when it happens: Trans log backups. Login failure for "user2". Minidump Another minidump for the scheduler Repeated 17883 events. Server fails little by little until it won't accept any requests. Reboot is all that gets us going again (a band-aid) Interesting, though, is that the server box itself doesn't seem to have any problems. CPU usage is normal. Network connectivity is fine. We can remote in and look at logs. Management studio does eventually bog down, though. Today, for the first time, we tried stopping services instead of a reboot. All services stopped on their own except for the SQL Server service. We finally did an "end task" on that one and were able to bring everything back up. It worked fine for about 30 minutes until we started seeing timeouts and 17883's again. This time, probably because we didn't reboot all the way, we saw a bunch of 844 events mixed in with the 17883's. Our entire tech team here is scratching heads... some ideas we're kicking around: MS Cumulative Update hit around the same time as when we first had a problem. Since then, we've rolled it back. Maybe it didn't rollback all the way. The situation looks and feels like an unhandled "stack overflow" (no relation) in that it starts small and compounds over time. Problem with this is that there isn't significant CPU usage. At any rate, we're not ruling SQL 2005 bug out at all. Maybe we added one too many import processes and have reached our limit on this box. (hard to believe). Looking at SQLDUMP0151.log at the time of one of the crashes. There are some "login failures" and then there are two stack dumps. 1st a normal stack dump, 2nd for a scheduler dump. Here's a snippet: (sorry for the lack of line breaks) 2009-11-10 11:59:14.95 spid63 Using 'xpsqlbot.dll' version '2005.90.3042' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required. 2009-11-10 11:59:15.09 spid63 Using 'xplog70.dll' version '2005.90.3042' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required. 2009-11-10 12:02:33.24 Logon Error: 18456, Severity: 14, State: 16. 2009-11-10 12:02:33.24 Logon Login failed for user 'standard_user2'. [CLIENT: 50.36.172.101] 2009-11-10 12:08:21.12 Logon Error: 18456, Severity: 14, State: 16. 2009-11-10 12:08:21.12 Logon Login failed for user 'standard_user2'. [CLIENT: 50.36.172.101] 2009-11-10 12:13:49.38 Logon Error: 18456, Severity: 14, State: 16. 2009-11-10 12:13:49.38 Logon Login failed for user 'standard_user2'. [CLIENT: 50.36.172.101] 2009-11-10 12:15:16.88 Logon Error: 18456, Severity: 14, State: 16. 2009-11-10 12:15:16.88 Logon Login failed for user 'standard_user2'. [CLIENT: 50.36.172.101] 2009-11-10 12:18:24.41 Logon Error: 18456, Severity: 14, State: 16. 2009-11-10 12:18:24.41 Logon Login failed for user 'standard_user2'. [CLIENT: 50.36.172.101] 2009-11-10 12:18:38.88 spid111 Using 'dbghelp.dll' version '4.0.5' 2009-11-10 12:18:39.02 spid111 *Stack Dump being sent to C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\SQLDump0149.txt 2009-11-10 12:18:39.02 spid111 SqlDumpExceptionHandler: Process 111 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process. 2009-11-10 12:18:39.02 spid111 * ***************************************************************************** 2009-11-10 12:18:39.02 spid111 * 2009-11-10 12:18:39.02 spid111 * BEGIN STACK DUMP: 2009-11-10 12:18:39.02 spid111 * 11/10/09 12:18:39 spid 111 2009-11-10 12:18:39.02 spid111 * 2009-11-10 12:18:39.02 spid111 * 2009-11-10 12:18:39.02 spid111 * Exception Address = 0159D56F Module(sqlservr+0059D56F) 2009-11-10 12:18:39.02 spid111 * Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION 2009-11-10 12:18:39.02 spid111 * Access Violation occurred writing address 00000000 2009-11-10 12:18:39.02 spid111 * Input Buffer 138 bytes - 2009-11-10 12:18:39.02 spid111 * " N R S C _ P T A 22 00 4e 00 52 00 53 00 43 00 5f 00 50 00 54 00 41 00 2009-11-10 12:18:39.02 spid111 * C _ Q A . d b o . 43 00 5f 00 51 00 41 00 2e 00 64 00 62 00 6f 00 2e 00 2009-11-10 12:18:39.02 spid111 * U s p S e l N e x 55 00 73 00 70 00 53 00 65 00 6c 00 4e 00 65 00 78 00 2009-11-10 12:18:39.02 spid111 * t A c c o u n t 74 00 41 00 63 00 63 00 6f 00 75 00 6e 00 74 00 00 00 2009-11-10 12:18:39.02 spid111 * @ i n t F o r m I 0a 40 00 69 00 6e 00 74 00 46 00 6f 00 72 00 6d 00 49 2009-11-10 12:18:39.02 spid111 * D & 8 @ t x 00 44 00 00 26 04 04 38 00 00 00 09 40 00 74 00 78 00 2009-11-10 12:18:39.02 spid111 * t A l i a s § 74 00 41 00 6c 00 69 00 61 00 73 00 00 a7 0f 00 09 04 2009-11-10 12:18:39.02 spid111 * Ð GQE9732 d0 00 00 07 00 47 51 45 39 37 33 32 2009-11-10 12:18:39.02 spid111 * 2009-11-10 12:18:39.02 spid111 * 2009-11-10 12:18:39.02 spid111 * MODULE BASE END SIZE 2009-11-10 12:18:39.02 spid111 * sqlservr 01000000 02C09FFF 01c0a000 2009-11-10 12:18:39.02 spid111 * ntdll 7C800000 7C8C1FFF 000c2000 2009-11-10 12:18:39.02 spid111 * kernel32 77E40000 77F41FFF 00102000

  Read the article

• ASP.net roles and Projects

  - by Zyphrax

  EDIT - Rewrote my original question to give a bit more information Background info At my work I'm working on a ASP.Net web application for our customers. In our implementation we use technologies like Forms authentication with MembershipProviders and RoleProviders. All went well until I ran into some difficulties with configuring the roles, because the roles aren't system-wide, but related to the customer accounts and projects. I can't name our exact setup/formula, because I think our company wouldn't approve that... What's a customer / project? Our company provides management information for our customers on a yearly (or other interval) basis. In our systems a customer/contract consists of: one Account: information about the Company per Account, one or more Products: the bundle of management information we'll provide per Product, one or more Measurements: a period of time, in which we gather and report the data Extranet site setup Eventually we want all customers to be able to access their management information with our online system. The extranet consists of two sites: Company site: provides an overview of Account information and the Products Measurement site: after selecting a Measurement, detailed information on that period of time The measurement site is the most interesting part of the extranet. We will create submodules for new overviews, reports, managing and maintaining resources that are important for the research. Our Visual Studio solution consists of a number of projects. One web application named Portal for the basis. The sites and modules are virtual directories within that application (makes it easier to share MasterPages among things). What kind of roles? The following users (read: roles) will be using the system: Admins: development users :) (not customer related, full access) Employees: employees of our company (not customer related, full access) Customer SuperUser: top level managers (full access to their account/measurement) Customer ContactPerson: primary contact (full access to their measurement(s)) Customer Manager: a department manager (limited access, specific data of a measurement) What about ASP.Net users? The system will have many ASP.Net users, let's focus on the customer users: Users are not shared between Accounts SuperUser X automatically has access to all (and new) measurements User Y could be Primary contact for Measurement 1, but have no role for Measurement 2 User Y could be Primary contact for Measurement 1, but have a Manager role for Measurement 2 The department managers are many individual users (per Measurement), if Manager Z had a login for Measurement 1, we would like to use that login again if he participates in Measurement 2. URL structure These are typical urls in our application: http://host/login - the login screen http://host/project - the account/product overview screen (measurement selection) http://host/project/1000 - measurement (id:1000) details http://host/project/1000/planning - planning overview (for primary contact/superuser) http://host/project/1000/reports - report downloads (manager department X can only access report X) We will also create a document url, where you can request a specific document by it's GUID. The system will have to check if the user has rights to the document. The document is related to a Measurement, the User or specific roles have specific rights to the document. What's the problem? (finally ;)) Roles aren't enough to determine what a user is allowed to see/access/download a specific item. It's not enough to say that a certain navigation item is accessible to Managers. When the user requests Measurement 1000, we have to check that the user not only has a Manager role, but a Manager role for Measurement 1000. Summarized: How can we limit users to their accounts/measurements? (remember superusers see all measurements, some managers only specific measurements) How can we apply roles at a product/measurement level? (user X could be primarycontact for measurement 1, but just a manager for measurement 2) How can we limit manager access to the reports screen and only to their department's reports? All with the magic of asp.net classes, perhaps with a custom roleprovider implementation. Similar Stackoverflow question/problem http://stackoverflow.com/questions/1367483/asp-net-how-to-manage-users-with-different-types-of-roles

  Read the article

• Linux networking crash: best steps to find out the cause?

  - by Aron Rotteveel

  One of our Linux (CentOS) servers was unreachable last night. The server was not reachable in any way except for the remote console. After logging in with the remote console, it turned out I could not ping any outside hosts either. A simple service network restart solved the issue, but I am still wondering what could have caused this. My log files seem to indicate no error at all (except for the various daemons that need a network connection and failed after the network failure). Are there any additional steps I can take to find out the cause of this problem? EDIT: this just happened again. The server was completely unresponsive until I issued a networking service restart. Any advise is welcome. Could this be caused by a faulty hardware component? As per Madhatters request, here are some excerpts from the log at the time (the network crashed at 20:13): /var/log/messages: Dec 2 20:01:05 graviton kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=<stripped> SRC=<stripped> DST=<stripped> LEN=40 TOS=0x00 PREC=0x00 TTL=101 ID=256 PROTO=TCP SPT=6000 DPT=3306 WINDOW=16384 RES=0x00 SYN URGP=0 Dec 2 20:01:05 graviton kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=<stripped> SRC=<stripped> DST=<stripped> LEN=40 TOS=0x00 PREC=0x00 TTL=100 ID=256 PROTO=TCP SPT=6000 DPT=3306 WINDOW=16384 RES=0x00 SYN URGP=0 Dec 2 20:01:05 graviton kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=<stripped> SRC=<stripped> DST=<stripped> LEN=40 TOS=0x00 PREC=0x00 TTL=101 ID=256 PROTO=TCP SPT=6000 DPT=3306 WINDOW=16384 RES=0x00 SYN URGP=0 Dec 2 20:13:34 graviton junglediskserver: Connection to gateway failed: xGatewayTransport - Connection to gateway failed. The first three messages are simple responses to iptables rules I have set up through the LFD firewall. The last message indicates that JungleDisk, which I use for backups can no longer connect to the gateway. Apart from this, there are no interesting messages around this time. EDIT 4 dec: as per Mattdm's request, here is the output of ethtool eth0: (Please not that these are the settings that currently work. If things go wrong again, I will be sure to post this again if necessary. Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: d Link detected: yes As per Joris' request, here is also the output of route -n: aron@graviton [~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface xx.xx.xx.58 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.42 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.43 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.41 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.46 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.47 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.44 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.45 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.50 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.51 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.48 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.49 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.54 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.52 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.53 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.0 0.0.0.0 255.255.255.192 U 0 0 0 eth0 xx.xx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 xx.xx.xx.62 0.0.0.0 UG 0 0 0 eth0 The bottom xx.62 is my gateway. EDIT december 28th: the problem occurred again and I got the chance to compare some of the outputs of the above tests. What I found out is that arp -an returns an incomplete MAC address for my gateway (which is not under my control; the server is in a shared rack): During failure: ? (xx.xx.xx.62) at <incomplete> on eth0 After service network restart: ? (xx.xx.xx.62) at 00:00:0C:9F:F0:30 [ether] on eth0 Is this something I can fix or is it time for me to contact the data centre?

  Read the article

• Macports irssi & perl5 installation issues

  - by Dmitri DB

  Long time reader, first time poster. Big, appreciative thanks for everyone's collective questioning and answering here and at stackoverflow, it's helped me quite a lot over the time I've been learning answers through these sites! Apologies in advance if I didn't search hard enough on posts already up on this site to find out what I could do about this issue, but I thought I'd just reach out for the sake of trying at least once. I've experienced this issue while starting up my macports-installed version of irssi: 13:25 -!- Irssi: Error in script dispatch: 13:25 Can't locate lib.pm in @INC (@INC contains: /opt/local/lib/perl5/site_perl/5.12.4/darwin-multi-2level /opt/local/lib/perl5/site_perl/5.12.4 /opt/local/lib/perl5/vendor_perl/5.12.4/darwin-multi-2level /opt/local/lib/perl5/vendor_perl/5.12.4 /opt/local/lib/perl5/5.12.4/darwin-multi-2level /opt/local/lib/perl5/5.12.4 /opt/local/lib/perl5/site_perl/5.12.3/darwin-multi-2level /opt/local/lib/perl5/site_perl/5.12.3 /opt/local/lib/perl5/site_perl /opt/local/lib/perl5/vendor_perl .) at (eval 18) line 1. 13:25 BEGIN failed--compilation aborted at (eval 18) line 1. 13:25 Huh, strange. I looked into it a bit: [email protected] /opt/local/lib/perl5 ?- find . -name "lib.pm" -ls 14673887 16 -r--r--r-- 1 root admin 6853 25 Jun 23:39 ./5.12.4/darwin-thread-multi- 2level/lib.pm [email protected] /opt/local/lib/perl5 ?- l 5.12.4/darwin-thread-multi-2level total 1864 drwxr-xr-x 55 root admin 1870 28 Jun 19:28 . drwxr-xr-x 158 root admin 5372 28 Jun 19:28 .. -rw-r--r-- 1 root admin 177814 25 Jun 23:39 .packlist drwxr-xr-x 6 root admin 204 28 Jun 19:28 B -r--r--r-- 1 root admin 25714 25 Jun 23:39 B.pm drwxr-xr-x 64 root admin 2176 28 Jun 19:28 CORE drwxr-xr-x 3 root admin 102 28 Jun 19:28 Compress -r--r--r-- 1 root admin 3000 25 Jun 23:39 Config.pm -r--r--r-- 1 root admin 228094 25 Jun 23:39 Config.pod -r--r--r-- 1 root admin 409 25 Jun 23:39 Config_git.pl -r--r--r-- 1 root admin 38759 25 Jun 23:39 Config_heavy.pl -r--r--r-- 1 root admin 21174 25 Jun 23:39 Cwd.pm -r--r--r-- 1 root admin 63535 25 Jun 23:39 DB_File.pm drwxr-xr-x 3 root admin 102 28 Jun 19:28 Data drwxr-xr-x 5 root admin 170 28 Jun 19:28 Devel drwxr-xr-x 4 root admin 136 28 Jun 19:28 Digest -r--r--r-- 1 root admin 25185 25 Jun 23:39 DynaLoader.pm drwxr-xr-x 22 root admin 748 28 Jun 19:28 Encode -r--r--r-- 1 root admin 29731 25 Jun 23:39 Encode.pm -r--r--r-- 1 root admin 6736 25 Jun 23:39 Errno.pm -r--r--r-- 1 root admin 5445 25 Jun 23:39 Fcntl.pm drwxr-xr-x 5 root admin 170 28 Jun 19:28 File drwxr-xr-x 3 root admin 102 28 Jun 19:28 Filter -r--r--r-- 1 root admin 1819 25 Jun 23:39 GDBM_File.pm drwxr-xr-x 4 root admin 136 28 Jun 19:28 Hash drwxr-xr-x 3 root admin 102 28 Jun 19:28 I18N drwxr-xr-x 11 root admin 374 28 Jun 19:28 IO -r--r--r-- 1 root admin 1404 25 Jun 23:39 IO.pm drwxr-xr-x 6 root admin 204 28 Jun 19:28 IPC drwxr-xr-x 4 root admin 136 28 Jun 19:28 List drwxr-xr-x 4 root admin 136 28 Jun 19:28 MIME drwxr-xr-x 3 root admin 102 28 Jun 19:28 Math -r--r--r-- 1 root admin 2519 25 Jun 23:39 NDBM_File.pm -r--r--r-- 1 root admin 4208 25 Jun 23:39 O.pm -r--r--r-- 1 root admin 15563 25 Jun 23:39 Opcode.pm -r--r--r-- 1 root admin 21011 25 Jun 23:39 POSIX.pm -r--r--r-- 1 root admin 58962 25 Jun 23:39 POSIX.pod drwxr-xr-x 5 root admin 170 28 Jun 19:28 PerlIO -r--r--r-- 1 root admin 2515 25 Jun 23:39 SDBM_File.pm drwxr-xr-x 4 root admin 136 28 Jun 19:28 Scalar -r--r--r-- 1 root admin 10837 25 Jun 23:39 Socket.pm -r--r--r-- 1 root admin 41003 25 Jun 23:39 Storable.pm drwxr-xr-x 4 root admin 136 28 Jun 19:28 Sys drwxr-xr-x 3 root admin 102 28 Jun 19:28 Text drwxr-xr-x 5 root admin 170 28 Jun 19:28 Time drwxr-xr-x 3 root admin 102 28 Jun 19:28 Unicode -r--r--r-- 1 root admin 14462 25 Jun 23:39 attributes.pm drwxr-xr-x 38 root admin 1292 28 Jun 19:28 auto -r--r--r-- 1 root admin 19892 25 Jun 23:39 encoding.pm -r--r--r-- 1 root admin 6853 25 Jun 23:39 lib.pm -r--r--r-- 1 root admin 11044 25 Jun 23:39 mro.pm -r--r--r-- 1 root admin 997 25 Jun 23:39 ops.pm -r--r--r-- 1 root admin 13945 25 Jun 23:39 re.pm drwxr-xr-x 3 root admin 102 28 Jun 19:28 threads -r--r--r-- 1 root admin 33283 25 Jun 23:39 threads.pm So, it sort of seems to me that the permissions which perl5 got installed with for these modules has gotten mixed up somehow? I'm not really a perl user beyond enjoying it for massive directory-recursive find/replace operations within text files, so I haven't much of an idea what the permissions here are supposed to look like, and I'm not really sure how to go about determining how macports has gone and installed perl this way when it's otherwise worked without failure for years now. Does anyone have any recommendations for the sanest path towards rectifying this issue? Also, is there any interesting reason as to why the macports default for the perl5 port installs 5.12.4, and not 5.16.0, which has to be explicitly installed via the perl5.16 port? Thanks again!

  Read the article

• SVN: Release branch headaches, how to merge in website revisions as and when cleared to go live?

  - by Pete Duncanson

  I need a sanity check here if we can, any ideas on correcting/changing the following are very welcome! We've been getting ourselves in knots of late with our SVN and are trying to correct it by putting a Trunk/Release system in place. We have a large website that we develop on and we store it all in SVN. Heres what we had in mind: We have trunk and a release branch All work gets checked into Trunk. When a feature is deemed ready for the next release it is merged into a Release branch. We only have one release branch and just tag "Latest" when we do a push to live We hope to be able to get all the files changed from Latest to Head to give us a zip that we can upload (any ideas on an easy way to do this via scripting?) So we set all this up and where very happy with ourselves. Except its not working and heres why. We work on lots a different features/fixes/problems at once and they don't all get nicely checked in feature complete (but always working at least). Then sometimes you have to wait for Clients to sign off. As a result you end up with revisions which are "ready for live" being scattered with ones which are "still being worked on" in trunk. That means that the completed revisions are not getting merged in sequentially but out of order. I thought SVN could handle this, clever little thing it is, but apparently not. Heres an example: Pete changes some CSS to make a new button look pretty (Revision 1) Dave add some CSS to the bottom of the same CSS file as Pete's for a new feature (Revision 2) Dave's mod gets the nod so he merges it into Release and commits it with a log message mentioning revision number and bug tracking id. Pete adds more buttons to finish this mod, no CSS changes here though (Revision 3) Pete then merges his mods (Revision 1 and 3) into the Head of Release (which has Daves merge in it) but this over-writes Daves CSS additions which now dissapear completely. This leads to the site being broken and the Release branch being pretty much useless. So we tried some other ideas like reverting Release back to "Latest" and then just merging in all the Revisions 1,2 and 3 in order. This worked fine until we had Revision 4 which was not ready for live and Revision 5 which was. Suddenly we are getting ourselves in knots again with exactly the same problem! Ok so take three. Revert to Latest, merge in Revision 5, then do any update back to Head. Tree conflicts galore! So thats a no no. I cracked in the end and built it all up manaually but its not something I want to do regular, ideally I want to script our deployment but can't while Release is in such a mess. HELP! What the heck are we doing wrong? I can't seem to find any solutions to this problem of wanting different none sequential Revisions in Release. If its not possible thats fine but how the heck are we meant to get stuff live easily. We can't branch for every single change, the site takes 30 minutes+ to check out it would take too long. Side note, we are using TortoiseSVN so can we keep command line examples to a minimum in any answers? Latest version of TSVN and SVN Version 1.6 so we have the funky merge tracking etc. EDIT: An excellent blog post which deals with the dev/release cycle (although using GIT but still relivant) thought everyone would like to read it if they found this question interesting. (http://nvie.com/git-model) EDIT 2: I wrote a blog post on how to show which branch you are working on in your website which others have asked me about (http://www.offroadcode.com/2010/5/14/which-svn-branch-are-you-working-on.aspx). Hope that helps. In the meantime we are looking at Kiln and hoping to make the switch next month (gulp!)

  Read the article

• Spotlight Infinite Indexing issue (external data drive)

  - by Manca Weeks

  This is an external drive, formerly a boot drive which is now in use only to access music files (sibelius, audio, midi, live, logic etc.) without transferring the data into a new boot system, partly because of the issue I am about to describe, but mostly because the majority of the data is mainly there for archival purposes. The user is a composer and prominent musician and needs to be able to rehash the data at will. I have tried several things - here is a list: - make complete filesystem clone with antonio diaz's ddrescue - run Disk Warrior on copy, repair whatever errors occurred - wipe out all ACLs on entire drive - set all permissions to the same value - wide open 777 - remove any system data (applications, system files, including hidden files to the best of my knowledge) by selecting only non-system/app data and using Carbon Copy Cloner to put only the data of interest onto a newly formatted drive - transfer data to newly formatted drive folder by folder, resetting the spotlight index in between adding each to observe for issues (interesting here is that no issues occurred except for in Documents folder - when I transferred only the Documents folder to a newly formatted drive on its own - no trouble. It appears almost as thought it may not be the content but the quantity or specific combination of data that results in problems) - use DataRescue to transfer the data to yet another newly formatted drive to expose any missed hidden files Between each of the above steps I stopped Spotlight (search for anything beginning with md in Activity Monitor - All Processes and quitting it), deleted the .Spotlight-V100 directory from the affected drive. Restart Splotlight indexing by adding drive to Spotlight privacy list and removing it. In each case the same issue occurs - Spotlight begins indexing normally (or so it seems), then the index estimated time increases, usually to 4 hours remaining. This is where it gets stuck and continues to predict 4 hours remaining but never finishes. Sometimes I can't eject the drive and have to quit the md.. processes from Activity Monitor to be able to eject the drive without Force Eject. Once I disconnect the drive after the 4 hours remaining situation - if I reattach it, Spotlight forever estimates remaining time and never gets going again. So there it is. It is apparently not a filesystem issue, not a permissions issue and not tied to any particular piece of hardware or protocol (used USB and FW drives). I have tried this on several machines (3 to be precise) and in 10.5.8 and 10.6.5. Simply disabling Spotlight on this volume is not an option because the owner has no clue where things are as the data on the volume dates back to music projects and compositions from 2003 and before. He needs to be able to query for results. Anyone got any ideas? ---update 2-6-11 Since I have not received any responses except the one below which appears to misunderstand my point, I am updating this post hoping to get more responses. I have used the terminal command sudo opensnoop -p PID where PID is the mdworker process ID to try and determine what Spotlight is doing and hopefully find the files it's having trouble with. Here's what happens: After indexing for a few hours, mdworker is gone. It no longer shows up in Activity Monitor under "All Processes" and the Terminal window with the opensnoop result stops moving. I then proceeded to execute the same command on mds to see what it was doing and here's what I get, repeatedly: 501 57 mds 21 / 501 57 mds 21 /Volumes/Sno Leppard 501 57 mds 21 /Volumes/Tiger 501 57 mds 21 /Volumes/Leppard 501 57 mds 21 /Volumes/Disk Warrior 501 57 mds 21 /Volumes/ONM Data These represent all the volumes currently mounted in the system. All except ONM Data, which is the one I am trying to index, are excluded from SPotlight indexing at the moment. The sequence above repeats over and over, with slight variation, sometimes skipping one of the volumes. Questions - what happened to mdworker? What is mds doing? I will let this run until tomorrow morning and throughout the day and monitor for any changes. Any input would be very much appreciated. Even if you're not sure what the ultimate answer is, please alert me to anything you think I may be missing. Hopefully at some point we will figure this out... Thanks, M __final edit__ I finally resolved the issue and here is how I did it. I used the terminal command "sudo opensnoop -p PID" where the PID is the process id of the processes I was monitoring. I was looking at all instances of mds and mdworker running in the system. After the third time through indexing the same data set (see info above), I contacted Apple and got to their highest level of support - they were flabbergasted as well. They advised me to install yet another default 10.6.6 system and try again. The same pattern repeated - mds and mdworker(s) would start indexing and eventually the spotlight icon would say 6 hours remaining and all mdworkers were gone, mds at 90% or so of CPU. But I did finally figure out that the first time mdworker stopped like that, the last file it touched was always in the same folder. I excluded that folder from spotlight search and the rest of the data set indexed within about 2 hours with no strange behavior or failures. I copied that folder to another machine and Spotlight barfed immediately. Exclude that folder and all is well again. I have no clue what is causing this behavior, still, but I did find a functional solution to the problem. Anyone with a similar problem - run opensnoop on all instances of mds and mdworker and wait patiently for wdworker to exit. Look at the last file it touched and exclude the enclosing folder from being indexed. I was able to repeat the issue and solution on 2 different installs and 2 different copies of the data set. Hope this helps. If we find an actual cause of the folder being such a problem (it is called MICHAEL BRECKER RECORD SOLOS and contains almost 1 GB of audio related files - performer, live, SD2 - things like that), I will edit again to let you all know. Thanks for ay attempts to help, M

  Read the article

• Database - Designing an "Events" Table

  - by Alix Axel

  After reading the tips from this great Nettuts+ article I've come up with a table schema that would separate highly volatile data from other tables subjected to heavy reads and at the same time lower the number of tables needed in the whole database schema, however I'm not sure if this is a good idea since it doesn't follow the rules of normalization and I would like to hear your advice, here is the general idea: I've four types of users modeled in a Class Table Inheritance structure, in the main "user" table I store data common to all the users (id, username, password, several flags, ...) along with some TIMESTAMP fields (date_created, date_updated, date_activated, date_lastLogin, ...). To quote the tip #16 from the Nettuts+ article mentioned above: Example 2: You have a “last_login” field in your table. It updates every time a user logs in to the website. But every update on a table causes the query cache for that table to be flushed. You can put that field into another table to keep updates to your users table to a minimum. Now it gets even trickier, I need to keep track of some user statistics like how many unique times a user profile was seen how many unique times a ad from a specific type of user was clicked how many unique times a post from a specific type of user was seen and so on... In my fully normalized database this adds up to about 8 to 10 additional tables, it's not a lot but I would like to keep things simple if I could, so I've come up with the following "events" table: |------|----------------|----------------|--------------|-----------| | ID | TABLE | EVENT | DATE | IP | |------|----------------|----------------|--------------|-----------| | 1 | user | login | 201004190030 | 127.0.0.1 | |------|----------------|----------------|--------------|-----------| | 1 | user | login | 201004190230 | 127.0.0.1 | |------|----------------|----------------|--------------|-----------| | 2 | user | created | 201004190031 | 127.0.0.2 | |------|----------------|----------------|--------------|-----------| | 2 | user | activated | 201004190234 | 127.0.0.2 | |------|----------------|----------------|--------------|-----------| | 2 | user | approved | 201004190930 | 217.0.0.1 | |------|----------------|----------------|--------------|-----------| | 2 | user | login | 201004191200 | 127.0.0.2 | |------|----------------|----------------|--------------|-----------| | 15 | user_ads | created | 201004191230 | 127.0.0.1 | |------|----------------|----------------|--------------|-----------| | 15 | user_ads | impressed | 201004191231 | 127.0.0.2 | |------|----------------|----------------|--------------|-----------| | 15 | user_ads | clicked | 201004191231 | 127.0.0.2 | |------|----------------|----------------|--------------|-----------| | 15 | user_ads | clicked | 201004191231 | 127.0.0.2 | |------|----------------|----------------|--------------|-----------| | 15 | user_ads | clicked | 201004191231 | 127.0.0.2 | |------|----------------|----------------|--------------|-----------| | 15 | user_ads | clicked | 201004191231 | 127.0.0.2 | |------|----------------|----------------|--------------|-----------| | 15 | user_ads | clicked | 201004191231 | 127.0.0.2 | |------|----------------|----------------|--------------|-----------| | 2 | user | blocked | 201004200319 | 217.0.0.1 | |------|----------------|----------------|--------------|-----------| | 2 | user | deleted | 201004200320 | 217.0.0.1 | |------|----------------|----------------|--------------|-----------| Basically the ID refers to the primary key (id) field in the TABLE table, I believe the rest should be pretty straightforward. One thing that I've come to like in this design is that I can keep track of all the user logins instead of just the last one, and thus generate some interesting metrics with that data. Due to the nature of the events table I also thought of making some optimizations, such as: #9: Since there is only a finite number of tables and a finite (and predetermined) number of events, the TABLE and EVENTS columns could be setup as ENUMs instead of VARCHARs to save some space. #14: Store IPs as UNSIGNED INT with INET_ATON() instead of VARCHARs. Store DATEs as TIMESTAMPs instead of DATETIMEs. Use the ARCHIVE (or the CSV?) engine instead of InnoDB / MyISAM. Overall, each event would only consume 14 bytes which is okay for my traffic I guess. Pros: Ability to store more detailed data (such as logins). No need to design (and code for) almost a dozen additional tables (dates and statistics). Reduces a few columns per table and keeps volatile data separated. Cons: Non-relational (still not as bad as EAV): SELECT * FROM events WHERE id = 2 AND table = 'user' ORDER BY date DESC(); 6 bytes overhead per event (ID, TABLE and EVENT). I'm more inclined to go with this approach since the pros seem to far outweigh the cons, but I'm still a little bit reluctant.. Am I missing something? What are your thoughts on this? Thanks!

  Read the article

• Qt 4.6 Adding objects and sub-objects to QWebView window object (C++ & Javascript)

  - by Cor

  I am working with Qt's QWebView, and have been finding lots of great uses for adding to the webkit window object. One thing I would like to do is nested objects... for instance: in Javascript I can... var api = new Object; api.os = new Object; api.os.foo = function(){} api.window = new Object(); api.window.bar = function(){} obviously in most cases this would be done through a more OO js-framework. This results in a tidy structure of: >>>api ------------------------------------------------------- - api Object {os=Object, more... } - os Object {} foo function() - win Object {} bar function() ------------------------------------------------------- Right now I'm able to extend the window object with all of the qtC++ methods and signals I need, but they all have 'seem' to have to be in a root child of "window". This is forcing me to write a js wrapper object to get the hierarchy that I want in the DOM. >>>api ------------------------------------------------------- - api Object {os=function, more... } - os_foo function() - win_bar function() ------------------------------------------------------- This is a pretty simplified example... I want objects for parameters, etc... Does anyone know of a way to pass an child object with the object that extends the WebFrame's window object? Here's some example code of how I'm adding the object: mainwindow.h #ifndef MAINWINDOW_H #define MAINWINDOW_H #include <QtGui/QMainWindow> #include <QWebFrame> #include "mainwindow.h" #include "happyapi.h" class QWebView; class QWebFrame; QT_BEGIN_NAMESPACE class MainWindow : public QMainWindow { Q_OBJECT public: MainWindow(QWidget *parent = 0); private slots: void attachWindowObject(); void bluesBros(); private: QWebView *view; HappyApi *api; QWebFrame *frame; }; #endif // MAINWINDOW_H mainwindow.cpp #include <QDebug> #include <QtGui> #include <QWebView> #include <QWebPage> #include "mainwindow.h" #include "happyapi.h" MainWindow::MainWindow(QWidget *parent) : QMainWindow(parent) { view = new QWebView(this); view->load(QUrl("file:///Q:/example.htm")); api = new HappyApi(this); QWebPage *page = view->page(); frame = page->mainFrame(); attachWindowObject(); connect(frame, SIGNAL(javaScriptWindowObjectCleared()), this, SLOT(attachWindowObject())); connect(api, SIGNAL(win_bar()), this, SLOT(bluesBros())); setCentralWidget(view); }; void MainWindow::attachWindowObject() { frame->addToJavaScriptWindowObject(QString("api"), api); }; void MainWindow::bluesBros() { qDebug() << "foo and bar are getting the band back together!"; }; happyapi.h #ifndef HAPPYAPI_H #define HAPPYAPI_H #include <QObject> class HappyApi : public QObject { Q_OBJECT public: HappyApi(QObject *parent); public slots: void os_foo(); signals: void win_bar(); }; #endif // HAPPYAPI_H happyapi.cpp #include <QDebug> #include "happyapi.h" HappyApi::HappyApi(QObject *parent) : QObject(parent) { }; void HappyApi::os_foo() { qDebug() << "foo called, it want's it's bar back"; }; I'm reasonably new to C++ programming (coming from a web and python background). Hopefully this example will serve to not only help other new users, but be something interesting for a more experienced c++ programmer to elaborate on. Thanks for any assistance that can be provided. :)

  Read the article

• Running 32 bit assembly code on a 64 bit Linux & 64 bit Processor : Explain the anomaly.

  - by claws

  Hello, I'm in an interesting problem.I forgot I'm using 64bit machine & OS and wrote a 32 bit assembly code. I don't know how to write 64 bit code. This is the x86 32-bit assembly code for Gnu Assembler (AT&T syntax) on Linux. //hello.S #include <asm/unistd.h> #include <syscall.h> #define STDOUT 1 .data hellostr: .ascii "hello wolrd\n"; helloend: .text .globl _start _start: movl $(SYS_write) , %eax //ssize_t write(int fd, const void *buf, size_t count); movl $(STDOUT) , %ebx movl $hellostr , %ecx movl $(helloend-hellostr) , %edx int $0x80 movl $(SYS_exit), %eax //void _exit(int status); xorl %ebx, %ebx int $0x80 ret Now, This code should run fine on a 32bit processor & 32 bit OS right? As we know 64 bit processors are backward compatible with 32 bit processors. So, that also wouldn't be a problem. The problem arises because of differences in system calls & call mechanism in 64-bit OS & 32-bit OS. I don't know why but they changed the system call numbers between 32-bit linux & 64-bit linux. asm/unistd_32.h defines: #define __NR_write 4 #define __NR_exit 1 asm/unistd_64.h defines: #define __NR_write 1 #define __NR_exit 60 Anyway using Macros instead of direct numbers is paid off. Its ensuring correct system call numbers. when I assemble & link & run the program. $cpp hello.S hello.s //pre-processor $as hello.s -o hello.o //assemble $ld hello.o // linker : converting relocatable to executable Its not printing helloworld. In gdb its showing: Program exited with code 01. I don't know how to debug in gdb. using tutorial I tried to debug it and execute instruction by instruction checking registers at each step. its always showing me "program exited with 01". It would be great if some on could show me how to debug this. (gdb) break _start Note: breakpoint -10 also set at pc 0x4000b0. Breakpoint 8 at 0x4000b0 (gdb) start Function "main" not defined. Make breakpoint pending on future shared library load? (y or [n]) y Temporary breakpoint 9 (main) pending. Starting program: /home/claws/helloworld Program exited with code 01. (gdb) info breakpoints Num Type Disp Enb Address What 8 breakpoint keep y 0x00000000004000b0 <_start> 9 breakpoint del y <PENDING> main I tried running strace. This is its output: execve("./helloworld", ["./helloworld"], [/* 39 vars */]) = 0 write(0, NULL, 12 <unfinished ... exit status 1> Explain the parameters of write(0, NULL, 12) system call in the output of strace? What exactly is happening? I want to know the reason why exactly its exiting with exitstatus=1? Can some one please show me how to debug this program using gdb? Why did they change the system call numbers? Kindly change this program appropriately so that it can run correctly on this machine. EDIT: After reading Paul R's answer. I checked my files claws@claws-desktop:~$ file ./hello.o ./hello.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped claws@claws-desktop:~$ file ./hello ./hello: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, not stripped All of my questions still hold true. What exactly is happening in this case? Can someone please answer my questions and provide an x86-64 version of this code?

  Read the article

• .NET Declarative Security: Why is SecurityAction.Deny impossible to work with?

  - by rally25rs

  I've been messing with this for about a day and a half now sifting through .NET reflector and MSDN docs, and can't figure anything out... As it stands in the .NET framework, you can demand that the current Principal belong to a role to be able to execute a method by marking a method like this: [PrincipalPermission(SecurityAction.Demand, Role = "CanEdit")] public void Save() { ... } I am working with an existing security model that already has a "ReadOnly" role defined, so I need to do exactly the opposite of above... block the Save() method if a user is in the "ReadOnly" role. No problem, right? just flip the SecurityAction to .Deny: [PrincipalPermission(SecurityAction.Deny, Role = "ReadOnly")] public void Save() { ... } Well, it turns out that this does nothing at all. The method still runs fine. It seems that the PrincipalPermissionAttribute defines: public override IPermission CreatePermission() But when the attribute is set to SecurityAction.Deny, this method is never called, so no IPermission object is ever created. Does anyone know of a way to get .Deny to work? I've been trying to make a custom secutiry attribute, but even that doesn't work. I tried to get tricky and do: public class MyPermissionAttribute : CodeAccessSecurityAttribute { private SecurityAction securityAction; public MyPermissionAttribute(SecurityAction action) : base(SecurityAction.Demand) { if (action != SecurityAction.Demand && action != SecurityAction.Deny) throw new ArgumentException("Unsupported SecurityAction. Only Demand and Deny are supported."); this.securityAction = action; } public override IPermission CreatePermission() { // do something based on the SecurityAction... } } Notice my attribute constructor always passes SecurityAction.Demand, which is the one action that would work previously. However, even in this case, the CreatePermission() method is still only called when the attribute is set to .Demand, and not .Deny! Maybe the runtime is actually checking the attribute instead of the SecurityAction passed to the CodeAccessSecurityAttribute constructor? I'm not sure what else to try here... anyone have any ideas? You wouldn't think it would be that hard to deny method access based on a role, instead of only demanding it. It really disturbed me that the default PrincipalPermission appears from within an IDE like it would be just fine doing a .Deny, and there is like a 1-liner in the MSDN docs that hint that it won't work. You would think the PrincipalPermissionAttribute constructor would throw an exception immediately if anything other that .Demand is specified, since that could create a big security hole! I never would have realized that .Deny does nothing at all if I hadn't been unit testing! Again, all this stems from having to deal with an existing security model that has a "ReadOnly" role that needs to be denied access, instead of doing it the other way around, where I cna just grant access to a role. Thanks for any help! Quick followup: I can actually make my custom attribute work by doing this: public class MyPermissionAttribute : CodeAccessSecurityAttribute { public SecurityAction SecurityAction { get; set; } public MyPermissionAttribute(SecurityAction action) : base(action) { } public override IPermission CreatePermission() { switch(this.SecurityAction) { ... } // check Demand or Deny } } And decorating the method: [MyPermission(SecurityAction.Demand, SecurityAction = SecurityAction.Deny, Role = "ReadOnly")] public void Save() { ... } But that is terribly ugly, since I'm specifying both Demand and Deny in the same attribute. But it does work... Another interesting note: My custom class extends CodeAccessSecurityAttribute, which in turn only extends SecurityAttribute. If I cnage my custom class to directly extend SecurityAttribute, then nothing at all works. So it seems the runtime is definately looking for only CodeAccessSecurityAttribute instances in the metadata, and does something funny with the SecurityAction specified, even if a custom constructor overrides it.

  Read the article

• Chaining CSS classes in IE6 - Trying to find a jQuery solution?

  - by Mike Baxter

  Right, perhaps I ask the impossible? I consider myself fairly new to Javscript and jQuery, but that being said, I have written some fairly complex code recently so I am definitely getting there... however I am now possed with a rather interesting issue at my current freelance contract. The previous web coder has taken a Grid-960 approach to the HTML and as a result has used chained classes to style many of the elements. The example below is typical of what can be found in the code: <div class='blocks four-col-1 orange highlight'>Some content</div> And in the css there will be different declarations for: (not actual css... but close enough) .blocks {margin-right:10px;} .orange {background-image:url(someimage.jpg);} .highlight {font-weight:bold;} .four-col-1 {width:300px;} and to make matters worse... this is in the CSS: .blocks.orange.highlight {background-colour:#dd00ff;} Anyone not familiar with this particular bug can read more on it here: http://www.ryanbrill.com/archives/multiple-classes-in-ie/ it is very real and very annoying. Without wanting to go into the merrits of not chaining classes (I told them this, but it is no longer feasible to change their approach... 100 hand coded pages into a 150 page website, no CMS... sigh) and without the luxury of being able to change the way these blocks are styled... can anyone advise me on the complexity and benefits between any of my below proposed approaches or possible other options that would adequately solve this problem. Potential Solution 1 Using conditional comments I am considering loading a jquery script only for IE6 that: Reads the class of all divs in a certain section of the page and pushes to an array creates empty boxes off screen with only one of the classes applied at a time Reads the applied CSS values for each box Re-applies these styles to the individual box, somehow bearing in mind the order in which they are called and overwriting conflicting instructions as required Potential Solution 2 read the class of all divs in a certain section of the page and push to an array Scan the document for links to style sheets Ajax grab the stylesheets and traverse looking for matching names to those in class array Apply styles as needed Potential Solution 3 Create an IE6 only stylesheet containing the exact style to be applied as a unique name (ie: class='blocks orange highlight' becomes class='blocks-orange-highlight') Traverse the document in IE6 and convert all spaces in class declarations to hyphens and reapply classes based on new style name Summary: Solution 1 allows the people at this company to apply any styles in the future and the script will adjust as needed. However it does not allow for the chained style to be added, only the individual style... it is also processor intensive and time consuming, but also the most likely to be converted into a plugin that could be used the world over Solution 2 is a potential nightmare to code. But again will allow for an endless number of updates without breaking Solution 3 will require someone at the companty to hardcode the new styles every time they make a change, and if they don't, IE6 will break. Ironically the site, whilst needing to conform to IE6 in a limited manner, does not need to run wihtout javascript (they've made the call... have JS or go away), so consider all jQuery and JS solutions to be 'game on'. Did I mention how much i hate IE6? Anyway... any thoughts or comments would be appreciated. I will continue to develop my own solution and if I discover one that can be turned into a jQuery plugin I will post it here in the comments. Regards, Mike.

  Read the article

• Can't find the source of an exception in Java

  - by Invader Zim

  Basically an exception is being thrown and I can't find the reason. Here is what I get on the console: Exception in thread "AWT-EventQueue-0" java.lang.ArrayIndexOutOfBoundsException: 0 at org.apache.batik.gvt.renderer.StrokingTextPainter.computeTextRuns(Unknown Source) at org.apache.batik.gvt.renderer.StrokingTextPainter.getTextRuns(Unknown Source) at org.apache.batik.gvt.renderer.StrokingTextPainter.getOutline(Unknown Source) at org.apache.batik.gvt.renderer.BasicTextPainter.getGeometryBounds(Unknown Source) at org.apache.batik.gvt.TextNode.getGeometryBounds(Unknown Source) at org.apache.batik.gvt.TextNode.getSensitiveBounds(Unknown Source) at org.apache.batik.gvt.AbstractGraphicsNode.getTransformedSensitiveBounds(Unknown Source) at org.apache.batik.gvt.CompositeGraphicsNode.getSensitiveBounds(Unknown Source) at org.apache.batik.gvt.CompositeGraphicsNode.getTransformedSensitiveBounds(Unknown Source) at org.apache.batik.gvt.CompositeGraphicsNode.getSensitiveBounds(Unknown Source) at org.apache.batik.gvt.CompositeGraphicsNode.getTransformedSensitiveBounds(Unknown Source) at org.apache.batik.gvt.CompositeGraphicsNode.getSensitiveBounds(Unknown Source) at org.apache.batik.gvt.CompositeGraphicsNode.getTransformedSensitiveBounds(Unknown Source) at org.apache.batik.gvt.CompositeGraphicsNode.getSensitiveBounds(Unknown Source) at org.apache.batik.gvt.CompositeGraphicsNode.nodeHitAt(Unknown Source) at org.apache.batik.gvt.event.AbstractAWTEventDispatcher.dispatchMouseEvent(Unknown Source) at org.apache.batik.gvt.event.AbstractAWTEventDispatcher.dispatchEvent(Unknown Source) at org.apache.batik.gvt.event.AWTEventDispatcher.dispatchEvent(Unknown Source) at org.apache.batik.gvt.event.AbstractAWTEventDispatcher.mouseEntered(Unknown Source) at org.apache.batik.swing.gvt.AbstractJGVTComponent$Listener.dispatchMouseEntered(Unknown Source) at org.apache.batik.swing.svg.AbstractJSVGComponent$SVGListener.dispatchMouseEntered(Unknown Source) at org.apache.batik.swing.gvt.AbstractJGVTComponent$Listener.mouseEntered(Unknown Source) at java.awt.AWTEventMulticaster.mouseEntered(Unknown Source) at java.awt.AWTEventMulticaster.mouseEntered(Unknown Source) at java.awt.Component.processMouseEvent(Unknown Source) at javax.swing.JComponent.processMouseEvent(Unknown Source) at java.awt.Component.processEvent(Unknown Source) at java.awt.Container.processEvent(Unknown Source) at java.awt.Component.dispatchEventImpl(Unknown Source) at java.awt.Container.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source) at java.awt.LightweightDispatcher.trackMouseEnterExit(Unknown Source) at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source) at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source) at java.awt.Container.dispatchEventImpl(Unknown Source) at java.awt.Window.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.EventQueue.dispatchEventImpl(Unknown Source) at java.awt.EventQueue.access$400(Unknown Source) at java.awt.EventQueue$2.run(Unknown Source) at java.awt.EventQueue$2.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source) at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source) at java.awt.EventQueue$3.run(Unknown Source) at java.awt.EventQueue$3.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source) It is obviously from a batik lib that I use to paint SVG files, but I made sure that nothing is painted until the document is loaded, ready and showing on screen. When thrown nothing is painted. Another interesting thing is the timing of the throwing. I am unable to find any logical patern, as sometimes it is thrown as soon as I initiate the class and sometimes it needs more then five minutes. In addition to this, as far as I tested there is no single action that calls repaint() that triggers it or rather all do. I am new to Java and all the other exceptions had the class and row number of where they were thrown so I don't know what to do here. Any suggestions would be greatly appreciated. The code is enormous so I'll put just the paint method and if anything additional is needed please say so. @Override public void paint(Graphics g) { if(documentLoaded && showingOnScreen){ try{ rad = (int)(radInit+zoom*faktorRad); //max rad = 20 super.paint(g); Graphics2D g2d = (Graphics2D) g; paintElements(g2d); } catch(NullPointerException nulle){ } } } edit: There is no array in my class so i can't check any index. I think that this exception is thrown from a library I use, but it's a .jar file and I don't know how to open it.

  Read the article

• File Fix-it codegolf (GCJ 2010 1B-A)

  - by KirarinSnow

  Last year (2009), the Google Code Jam featured an interesting problem as the first problem in Round 1B: Decision Tree As the problem seemed tailored for Lisp-like languages, we spontaneously had an exciting codegolf here on SO, in which a few languages managed to solve the problem in fewer characters than any Lisp variety, using quite a number of different techniques. This year's Round 1B Problem A (File Fix-it) also seems tailored for a particular family of languages, Unix shell scripts. So continuing the "1B-A tradition" would be appropriate. :p But which language will end up with the shortest code? Let us codegolf and see! Problem description (adapted from official page): You are given T test cases. Each test case contains N lines that list the full path of all directories currently existing on your computer. For example: /home/awesome /home/awesome/wheeeeeee /home/awesome/wheeeeeee/codegolfrocks /home/thecakeisalie Next, you are given M lines that list the full path of directories you would like to create. They are in the same format as the previous examples. You can create a directory using the mkdir command, but you can only do so if the parent directory already exists. For example, to create the directories /pyonpyon/fumufumu/yeahyeah and /pyonpyon/fumufumu/yeahyeahyeah, you would need to use mkdir four times: mkdir /pyonpyon mkdir /pyonpyon/fumufumu mkdir /pyonpyon/fumufumu/yeahyeah mkdir /pyonpyon/fumufumu/yeahyeahyeah For each test case, return the number of times you have to call mkdir to create all the directories you would like to create. Input Input consists of a text file whose first line contains the integer T, the number of test cases. The rest of the file contains the test cases. Each test case begins with a line containing the integers N and M, separated by a space. The next N lines contain the path of each directory currently existing on your computer (not including the root directory /). This is a concatenation of one or more non-empty lowercase alphanumeric strings, each preceded by a single /. The following M lines contain the path of each directory you would like to create. Output For each case, print one line containing Case #X: Y, where X is the case number and Y is the solution. Limits 1 = T = 100. 0 = N = 100. 1 = M = 100. Each path contains at most 100 characters. Every path appears only once in the list of directories already on your computer, or in the list of desired directories. However, a path may appear on both lists, as in example case #3 below. If a directory is in the list of directories already on your computer, its parent directory will also be listed, with the exception of the root directory /. The input file is at most 100,000 bytes long. Example Larger sample test cases may be downloaded here. Input: 3 0 2 /home/sparkle/pyon /home/sparkle/cakes 1 3 /z /z/y /z/x /y/y 2 1 /moo /moo/wheeeee /moo Output: Case #1: 4 Case #2: 4 Case #3: 0 Code Golf Please post your shortest code in any language that solves this problem. Input and output may be handled via stdin and stdout or by other files of your choice. Please include a disclaimer if your code has the potential to modify or delete existing files when executed. Winner will be the shortest solution (by byte count) in a language with an implementation existing prior to the start of Round 1B 2010.

  Read the article

< Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >