Search Results

Search found 16587 results on 664 pages for 'virtual hardware'.

Page 170/664 | < Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >

• need advice for storing data setup hardware for client with 80TB per year of data footprint increase

  - by dasko

  hi everyone, i currently have a client that will be adding replicated data from satellite locations in the number of approximately 80TB per year. with this said in year 2 we will have 160TB and so on year after year. i want to do some sort of raid 10 or raid 6 setup. i want to keep the servers to approximately 4u high and rack mounted. all suggestions welcome on a replication strategy. we will be wanting to have one instance of the data in house and the other to be co-located (any suggestions on co-locate sites too?). the obvious hardware will be something like a rack mount server with hot swap trays and dual xeon based type processors. the use of the data is for archives of information, files will be made up of small file sizes. i can add or expand to this question if it is too vague. thanks for looking.

  Read the article

• Is there any software or hardware which lets you stop, slow down, speed up or even reverse time?

  - by tjrobinson

  Obviously I'm talking about time in terms of the PC clock rather than real time. We were testing an application we've developed at work by setting the clock forward and back to simulate different scenarios and I started thinking how useful it would be if you could adjust the rate(?) of the system clock with finer control. So you could make a minute pass in a second or a day pass in 30 seconds and watch how the program you're developing copes with changes in date and time. I'd be interested to hear if anyone knows of any software or hardware which can let you do some or all of the above.

  Read the article

• How do I know if my Xeon Processor supports hardware virtualisation?

  - by gshankar

  I've been scouring the net (mainly the wikipaedia lists and intel's site. I even pulled out the datasheet for my processor) but I can't seem to answer this question. Does my Xeon support hardware virtualisation? The processor in question is a: "Nocona" (standard-voltage, 90 nm) 2800MHz. Other details can be found here: http://en.wikipedia.org/wiki/List_of_Intel_Xeon_microprocessors#.22Nocona.22_.28standard-voltage.2C_90_nm.29 I'm pretty sure the answer is no as it's a pretty old server but I can't find a single place which has a definitive yes/no answer so I'm still looking...

  Read the article

• Why does Resource Monitor in windows 7 show half my memory as "Hardware Reserved"?

  - by Brandon

  Does anyone know why in Windows 7 Resource Monitor shows that I have 8 GB of RAM installed on my computer, but I only have 3.2 GB available as 4.8 GB are in "Hardware Reserve". I researched this issue and tried going into msconfig and making sure that in the boot options the number of processors and max memory options were turned off. I also opened the computer up and reseated each of the memory sticks while clearing out any dust that was in there. Some info on the system I am using: OS: Windows 7 Enterprise 64-bit Edition CPU: AMD Phenom X4 9750 Memory: 4 X 2GB DDR2 memory Motherboard: MS-7548 (Aspen) Any help would be much appreciated.

  Read the article

• How can one create a bootable linux usb key that works on Mac (Intel 64 bit CPU) hardware ?

  - by user3621

  Hi, I'm trying to create a bootable usb key with linux (debian) and that can be booted on Macintel hardware. I have read that MAC's EFI can only boot GPT GUID formatted disks. I'm desperately trying to find a good tutorial which explains how to create such a key. Here what I have done so far: create a GUID partition on te key using linux GNU parted create a HFS+ or ext3 partition on the key, with the boot flag on install a linux .iso with unetbootin While all steps were successfull and in some cases I could even boot on a PC, the step of booting on Macintel software failed (on a macbook). I need to precise that I holded the "alt" key while booting the mac and the only visible bootable disk was the hard disk. Thanks for any advice. PS: I have tried with rEFIt as well. In one case I had a "windows" icon but it then failed to boot with a message like "no system found"

  Read the article

• Central Storage for windows user accounts homedirs .. hardware/software needed?

  - by mtkoan

  We have ~120+ users in our network, and are endeavoring to centralize logon authentication and home directory storage server-side. Most of the users are Windows 2000/XP machines, and a few running Mac OS X. Ideally the solution will be open-source-- can this all be managed from a Linux server running LDAP and Samba? Or would a hacked-NAS Box with a FreeNAS or similar suffice? Or is Micro$oft's Active Directory really the preference here. Is it viable to store PST files on this server for users to read from and write to? They are very large ~1.5gb. We have no mail server (or money) capable of Exchange or IMAP, only an old POP3. What kind of hardware horsepower and network architecture should we have for this kind of thing?

  Read the article

• Configure Linux server hardware buttons for soft reset or power cycle?

  - by Jakobud

  I have a small modest CentOS server at home. I run it headless because anytime I access it, it's always via SSH. Anyways, tonight it became unresponsive to the network. I could not connect to it to investigate. In this case, I have to hook up a keyboard and monitor to see the problem. I ended up just rebooting it. But after this experience, I was wondering if it's possible to configure the hardware buttons on the CPU case to perform a graceful reboot or graceful power cycle in Linux. Even though the server becomes unresponsive once in a blue moon, it would be nice to simply press a button and have it shutdown all services and gracefully reboot. Anyone know how this could be accomplished?

  Read the article

• "Missing operating system" even when booting from Linux Live CD: hardware problem?

  - by contextfree

  My parents' computer stopped booting from the HDD into Windows: it's showing a "Missing operating system" error. I tried burning a Live CD of the latest Ubuntu and booting from that, but it's giving me the same error. I know the Live CD works (I can boot my laptop from it). It does seem to be actually trying to boot from the CD (when I boot with the CD in it takes longer to get to the error message than if I boot with the CD out, or if I change the BIOS boot order to skip the CD drive; and the CD drive light is active during that time). Might this be a hardware problem? Are there common problems I can look for that might cause this?

  Read the article

• HTG Explains: What Is Bitcoin, the Virtual Digital Currency?

  - by YatriTrivedi

  Bitcoin is a virtual currency that employs some very interesting principles. Here’s the skinny on what exactly it is and how the fascinating technology behind it works. Disclaimer: This is NOT financial or legal advice. This. Is. NOT. Financial. Or. Legal. Advice. This is not, in any way, shape, or form, financial or legal advice. We’re covering this topic because of the technological implementations it uses and the innovations it attempts to make. If you do anything because of this post, we are not responsible because this is NOT financial or legal advice. ^_^ Latest Features How-To Geek ETC Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 The History Of Operating Systems [Infographic] DriveSafe.ly Reads Your Text Messages Aloud The Likability of Angry Birds [Infographic] Dim an Overly Bright Alarm Clock with a Binder Divider Preliminary List of Keyboard Shortcuts for Unity Now Available Bring a Touch of the Wild West to Your Desktop with the Rango Theme for Windows 7

  Read the article

• Does a system exist to facilitate virtual meetings and file sharing?

  - by CSharp Mania

  I'm looking for a system that is similar to an online classroom setup but allows for virtual meeting rooms with video/audio conferencing, and of course file sharing. I'm preferring an open source solution that I can edit/tweak myself as needed, and is of course free. Ultimately, I guess what I'm looking for is something that we could possibly tweak to give our own "branded" look and feel, if possible, along with full integration within our own servers. Thus the reason I brought up open source solutions. Do you masters of the web know of such a system available? If so, do you have a preferred one that you would suggest? OR, can such a system be developed by slapping together a couple of open source projects to derive at what is desired? Thanks for sharing your expertise. (FYI - I am a developer that is comfortable with PHP and C#. I'm not experienced with Ruby or Python, but a system using them or something else is acceptable. We can figure it out I'm sure.)

  Read the article

• Using mod_rewrite for a Virtual Filesystem vs. Real Filesystem

  - by philtune

  I started working in a department that uses a CMS in which the entire "filesystem" is like this: create a named file or folder - this file is given a unique node (ex. 2345) as well as a default "filename" (ex. /WelcomeToOurProductsPage) and apply a template assign one or more aliases to the file for a URL redirect (ex. /home-page-products - can also be accessed by /home-page-products.aspx) A new Rewrite command is written on the .htaccess file for each and every alias Server accesses either /WelcomeToOurProductsPage or /home-page-products and redirects to something like /template.aspx?tmp=2&node=2345 (here I'm guessing what it does - I only have front-end access for now - but I have enough clues to strongly assume) Node 2345 grabs content stored in a SQL Db and applies it to the template. Note: There are no actual files being created on the filesystem. It's entirely virtual. This is probably a very common thing, but since I have never run across this kind of system before two months ago, I wanted to explain it in case it isn't common. I'm not a fan at all of ASP or closed-sourced systems, so it may be that this is common practice for ASP developers. My question, that has taken far too long to ask, is: what are the benefits of this kind of system, as opposed to creating an actual file hierarchy? Are there any drawbacks to having every single file server call redirected? To having the .htaccess file hold rewrite rules for every single alias?

  Read the article

• how can I detect the maximum size of overlay hardware via Direct Draw library?

  - by Marian Klein

  how can I detect the maximum size of overlay hardware via Direct Draw library?

  Read the article

• Turn class "Interfaceable"

  - by scooterman

  Hi folks, On my company system, we use a class to represent beans. It is just a holder of information using boost::variant and some serialization/deserialization stuff. It works well, but we have a problem: it is not over an interface, and since we use modularization through dlls, building an interface for it is getting very complicated, since it is used in almost every part of our app, and sadly interfaces (abstract classes ) on c++ have to be accessed through pointers, witch makes almost impossible to refactor the entire system. Our structure is: dll A: interface definition through abstract class dll B: interface implementation there is a painless way to achieve that (maybe using templates, I don't know) or I should forget about making this work and simply link everything with dll B? thanks Edit: Here is my example. this is on dll A BeanProtocol is a holder of N dataprotocol itens, wich are acessed by a index. class DataProtocol; class UTILS_EXPORT BeanProtocol { public: virtual DataProtocol& get(const unsigned int ) const { throw std::runtime_error("Not implemented"); } virtual void getFields(std::list<unsigned int>&) const { throw std::runtime_error("Not implemented"); } virtual DataProtocol& operator[](const unsigned int ) { throw std::runtime_error("Not implemented"); } virtual DataProtocol& operator[](const unsigned int ) const { throw std::runtime_error("Not implemented"); } virtual void fromString(const std::string&) { throw std::runtime_error("Not implemented"); } virtual std::string toString() const { throw std::runtime_error("Not implemented"); } virtual void fromBinary(const std::string&) { throw std::runtime_error("Not implemented"); } virtual std::string toBinary() const { throw std::runtime_error("Not implemented"); } virtual BeanProtocol& operator=(const BeanProtocol&) { throw std::runtime_error("Not implemented"); } virtual bool operator==(const BeanProtocol&) const { throw std::runtime_error("Not implemented"); } virtual bool operator!=(const BeanProtocol&) const { throw std::runtime_error("Not implemented"); } virtual bool operator==(const char*) const { throw std::runtime_error("Not implemented"); } virtual bool hasKey(unsigned int field) const { throw std::runtime_error("Not implemented"); } }; the other class (named GenericBean) implements it. This is the only way I've found to make this work, but now I want to turn it in a truly interface and remove the UTILS_EXPORT (which is an _declspec macro), and finally remove the forced linkage of B with A.

  Read the article

• ANDROID. Emulate Hardware Keys with an IME. Doesn't work with Dialog and Spinner

  - by shutdown11

  I have understand that the only way to inject KeyEvents in the Android System is to implement an Input Method. I have created my IME with the purpose to control from remote the device. I emulate the hardware keys using the method private void keyDownUp(int keyEventCode) { getCurrentInputConnection().sendKeyEvent( new KeyEvent(KeyEvent.ACTION_DOWN, keyEventCode)); getCurrentInputConnection().sendKeyEvent( new KeyEvent(KeyEvent.ACTION_UP, keyEventCode)); } in my class that extends InputMethodService. It works fine until an AlertDialog, or the menu of a Spinner comes in foreground. Also the windows that appears when the Menu key is problematic. My IME can't get focus on them, and the keyevents are sent to the activity behind them. Using hardware keys, the Dialog get the focus and you can select the botton on the Dialog. How can i emulate that, using the IME(or anything else)?

  Read the article

• What's the bottom half for a driver that doesn't actually have a corresponding hardware?

  - by user198729

  This question is inspired from this answer, what does the bottom half do for a driver that doesn't have actual hardware device?

  Read the article

• What benchmark tool to use to benchmark hardware for VM server?

  - by Mark0978

  We are setting up a new piece of hardware to virtualize several of our servers on. Choices are RAID 5, RAID 6, and RAID 0+1. We are wanting to benchmark all three before we go live with the machine, but I'm not sure how to test the speed. Since we will be using it to host VMs, what will the actual disk traffic look like? What can I use to see if RAID 6 is too slow? Short of setting up the system with all the VM's on it and running that way, then redoing on all the work, I'm not sure how to test it. It them becomes more of a subjective test than an objective one. I'm worried that RAID6 will have too much overhead, that RAID5 will be to fragile with 3TB drives and I've never worked with 0+1 at all. So in short I'd like to setup the base machine (which will be running Linux) and then test the underlying SW RAID for speed. What kind of tool exists to simulate this kind of load? Barring the lack of a specific tool, how about a generic FS testing tool that will simulate different loads?

  Read the article

• Advice needed for a home network setup (hardware & software) to handle many clients and potentially heavy traffic

  - by posdef

  I have recently decided to re-structure the home network of our flatshare here. Here's a quick outline of the situation. I envision to have the following 4 devices connected to the router via cable: Xbox 360 IP phone Printer QNAP server (Web, File and Multimedia) We are three people living here, so on top of that there will be to 5-6 computers/mobile devices connecting as wireless clients. My goal is to be able to transfer files (when needed) between the computer and the Multimedia server, which I can reach via 360 and play on the TV. I also would like to keep a high level of security; right now I have the encryption on WPA2 and MAC filtering. I don't believe the web server will get heavy traffic, though I would like to have it responsive. Likewise, I don't have a habit of downloading via torrent etc, but I greatly appreciate my network being responsive and fast, especially when I am browsing or streaming high quality media. Now my questions are: is this setup feasible? smart? efficient? can this be improved somehow? my current router (D-Link DI624) and the previous one (DI-524) used to have spontaneous drops in network, which I find highly irritating. I don't believe in my router, especially now that it completely crashed when I was test-running the setup by transferring a large media file to server while xbox was playing music from the server, and two computers browsing the net. Do I need to get new hardware, if so, any recommendations for a reliable and fast router?

  Read the article

• Computer locking up, looking for bootable hardware diagnostic tool.

  - by Carl Menke

  Well today I helped my friend build a computer. All went pretty well until we got to installing Win7. Thing is, we thought, it was crashing constantly. I adjusted pretty much every setting in the BIOS and removed as much hardware as possible to try and prevent a crash. No dice. So far I've tried running an Ubuntu live cd without the harddrive installed. Nope, crashed on boot. And then I just tried Microsoft's ram utility disk and it eventually locked up on that (the ram passed though). So it seems to me like it's either the CPU (AMD PhenomII x3) or the motherboard that could be bad, but I don't know how to test them individually for problems. I thought it could be a overheating issue, but the BIOS reports that the CPU temp is fine idling around 34C. Any advice or diagnostic disk that could help me out? TL;DR: Computer locks up frequently during use (cannot even boot/install an operating system), memory is fine, probably CPU or Mobo, BIOS says CPU temps are fine. What should I try?

  Read the article

• How do I migrate Exchange 2007 to new hardware?

  - by Graeme Donaldson

  As per my previous question, I have an Exchange 2007 box which is also a DC. Since I can't demote it while Exchange is installed, I want to move Exchange to a different server. Does anyone have any articles, tips or experiences to share on this? The last time I did this it was with Exchange 2003 and even that is a little rusty in my head. The setup is a single Exchange 2007 Hub/Edge/Mailbox/CAS server. Its currently on Windows Server 2008, I can migrate it to the same OS, or I can go to 2008 R2, I'm not really picky on that. We're running OWA/ActiveSync/POP3(S)/IMAP(S) for client access. I already have another fully functional DC/GC/DNS box in the same site and clients in the site are already using that for DNS. It's also the preferred site bridgehead for AD replication. Update: After reading Evan's answer I realised that my original question wasn't worded correctly. I'm not looking to do a swing migration, I actually need to move Exchange completely over to a new box. I have done swing migrations in the past, i.e. moving over to a temporary box and back to the original hardware afterwards, and I'm not really sure why I used that term in the original question since it's not what I intended. Any tips?

  Read the article

• Swapping out a hardware firewall does the mac address get cached?

  - by Dan

  We need to replace a hardware firewall (cisco pix) and have a spare that we will use (temporarily). The firewall sits in front of a couple of web-servers colocated at a data-centre. The replacement will be configured with identical settings (external/internal IP addresses, configured ports etc.). When we swap the firewalls over, will this work immediately or will the old Pix's mac address be cached and the new firewall not be seen until the cache is cleared? (What is it though that is caching the address? Is it just the switch/router that our pix is connected to?) Reason for asking is a few years ago I had a smoothwall firewall in front of a lone server (the external IP of the smoothwall was also the external IP of the web-server). When I replaced the smoothwall with a pix, the IP address of the web-server stayed the same but it now had to be reached via the new firewall on a different IP. It took about 2-4 hours before the rest of the world could see that web-server again. I'm hoping for less downtime this time!

  Read the article

• Microphone array support in Windows. Info on performance and compatible hardware?

  - by exinocactus

  It is officially claimed by Microsoft (Audio Device Technologies for Windows), that Windows Vista has an integrated system-level support of microphone arrays for improved sound capturing by isolating a sound source in target direction and rejecting ambient noise and reverberation. In more technical terms, an implementation of an adaptive beamformer. Theoretically, microphone arrays with 2-4 mics can substantially improve SNR under some conditions like speaker in front of the laptop in noisy environment (airport, cafe). Surprisingly, though, I find very little information about commercially-available products supporting these new features. I mean products like portable usb micropone arrays or laptops or flat screens with integrated mic arrays. I could only find info about two laptop models having "noise cancelling digital array microphone". These are Dell Latitude and Eee PC 1008P-KR. Now my questions: Do you have any experience with the Windows beamformer implementation? For instance, in the above mentioned laptops. How well does it work? Are there any tests results available in the net or in print (papers?)? Do you know about other microphone array hardware? What could be the reason why mic array technology didn't get sucess Is there mic arrays support in 'Windows 7'?

  Read the article

• Linux 'top' utility widly inaccurate (more so for multi-CPU/core hardware)?

  - by amn

  Hi all. After using 'top' for long time, albeit basically, I have grown to distrust it's '% CPU' column reports. I have a 8-core (quad core Intel i7 920 with hyperthreading) hardware, and see some wild numbers when running a process that should not use more than 5% overall. top happily reports 50%, and I suspect it is not so. My question is, is it a known fact that it's inaccurate when several CPUs/cores are present? I used 'mpstat' from the 'sysstat' package, and it's showings are much more conservative, certainly within my expectations. I did press '1' for 'top' to switch it to show all the core and us/sy/io stats, but the numbers are substantially higher than with 'mpstat'... I know that my expectations can be unfound as well, but my gut feeling tells me 'top' is wrong! :-) The reason I need to know is because the process I am monitoring only guarantees quality of service with CPU usage "less than 80%" (however vague that sounds), and I need to know how much headroom I have left. It's a streaming server.

  Read the article

• I installed XAMPP in a virtual drive and now I can't run its services. Why?

  - by Haris

  Hi, The description is quite long. Please spend some time to read it. ^:)^ I have an old PHP application and I'm trying to test and debug it. Unfortunately, the application uses important data so I can't just click this and that. Now, what I'm trying to do is create a copy of the application in a different computer. From now on, I will call the computer running my original PHP application as 'Computer A' and the computer which I'm going to use to run the copy of the application as 'Computer B'. To prevent missing link problems since the application contains static paths, such in images or tags, I have to copy all files and folder related to my PHP application from Computer A to the same path in Computer B. Unfortunately, Computer B only has drive C while Computer A has drive D and the files of my PHP application is located in 'D:\xampp\htdocs' in Computer A. OK, now I have to create drive D in computer B. At first, I tried to create a second partition in Computer B by using PowerQuest Partition Magic 8, but somehow Partition Magic doesn't run in Computer B. I have tried to reinstall it but it still doesn't run. So, another alternative is to create a virtual drive. That is what I did. I created a virtual drive by running the 'subst' command in Command Prompt. The virtual drive is D and it refers to a directory, which is 'C:\Virtual'. After I have drive D in Computer B, I installed XAMPP there. The installation was successful. Now, I also have 'D:\xampp\htdocs' in Computer B. However, when I ran the Apache, MySQL, or Filezilla service, I receive an error message "Error 3: The system cannot find the file specified.". In Computer B, there is no IIS or process using the port 80. What should I do? Please help me. Many thanks in advance, Haris

  Read the article

• Hyper-V + RRAS NAT + Port Forwarding + RDP, can I get it all working together?

  - by Tom Bull

  I am running a Windows 2008 R2 server with various services running natively and two virtualised servers running on Hyper-V. The hardware server, I'm going to call it REAL1, has one external NIC, to which I can assign any of the following IP addresses: 1.2.3.4, 1.2.3.5, 1.2.3.6, etc... I need to achieve the following: I would like to be able to connect to REAL1 via remote desktop (RDP / port 3389) on one IP address (say 1.2.3.4), but also to the virtualised servers (I'm going to call them VIRTUAL1 and VIRTUAL2) on the other available IP addresses (say 1.2.3.5 and 1.2.3.6). The easiest way of doing this is to connect the virtual servers directly to the external interface and assign them each their own IP address. REAL1 will have 1.2.3.4, VIRTUAL1 will have 1.2.3.5 and VIRTUAL2 will have 1.2.3.6. Unfortunately, although I don't directly manage the two virtual servers, I have responsibility for their security. I would like to have some kind of firewall between the virtual servers an the internet. I have tried running a virtual machine firewall, but have found the performance on Hyper-V pretty terrible. The alternative I am now trying is Routing and Remote Access (RRAS): I have set up a virtual network called 'Internal' and REAL1 has a virtual network adapter connected to this virtual network I have connected each of the virtual servers to this network too I have assigned each server static IP addresses on this virtual network (REAL1 has 10.1.1.1, VIRTUAL1 has 10.1.1.2 and VIRTUAL2 has 10.1.1.3) I have installed RRAS and set up a NAT. The external interface is the external NIC, the internal interface is the virtual NIC connected to the internal network I have assigned all the available external IP addresses to the external NIC on REAL1. The virtual servers have been set up appropriately such that their default gateway is pointing to 10.1.1.1 and they can both access externally. Success! The RRAS is routing packets. The problem I have is that when I try to port forward services from the external IP address on REAL1, it only works if there is not already a service bound to the port. Remote desktop 'greedily' binds to every available IP address on port 3389 on REAL1 so I can't selectively forward incoming traffic for 1.2.3.5:3389 to 10.1.1.2:3389. RRAS will allow me to set up this port forwarding, and no errors come up. It just doesn't work. So the question I have is: Is there a better way of doing this? Or at least is there a way of resolving the apparant conflict between RRAS and everything else on the physical server?

  Read the article

• Are there any tools for monitoring individual Apache virtual hosts in real-time?

  - by Dave Forgac

  I'm looking for a way to monitor and record Apache traffic, separated by virtual host. I am currently using Munin to capture this and other data for the entire server however I can't seem to find a way to do this by vhost. This link describes using a module called mod_watch which is apparently no longer in development: http://www.freshnet.org/wordpress/2007/03/08/monitoring-apaches-virtualhost-with-munin/ The file that is listed as being compatible with Apache 2.x is reported to have problems with missing vhosts an reporting data correctly. Does anyone know of a reliable way to determine real-time traffic per vhost? If I can find this it should be easy enough to write a new Munin plugin. Edit: What I'd really like to see is something similar to the Apache server-status scoreboard page with the number of connections / requests separated by virtual host. This would give me the ability to check which vhost may be experiencing a spike in traffic in real time and would also provide the data needed for a Munin module (or some alternative performance monitoring / analysis system.)

  Read the article

< Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >