Search Results

Search found 9332 results on 374 pages for 'an original alias'.

Page 171/374 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

  • HP dv6000 laptop powers on only if plugged in

    - by Ben
    My HP dv6000 laptop will not run on battery power. It will only run while plugged into the wall. I have already replaced the battery, but it still will not operate on battery power. The problem began slowly. The original battery's life got shorter and shorter, until eventually it would only last ~45 seconds before going into hibernation. Finally, the battery would not work at all, so I threw it out and just used it without a battery. I bought a replacement recently.... but the problem persists. When I connect the new battery to the system, the "charging" light turns on for about 30 seconds, then goes dark. I'm assuming there's something wrong with the internal charging circuitry? If this is the case, how would I go about fixing this, short of buying a new motherboard? If anyone could give me some assistance in confirming/rejecting my diagnosis I'd be very appreciative! :)

    Read the article

  • Browsers ignoring hosts file

    - by madkris
    Until recently my browsers started to ignore my hosts file. I have Windows 7 operating system installed. 192.168.0.5 livesite.com I have tried: Clearing browser cache Issued "ipconfig /flushdns" from the command line Issued "ping livesite.com" from the command line (response was "Reply from 192.168.0.5: bytes=32 time=1ms TTL=128") Restarting unit Backing up original hosts file and making a new one Checking lmhosts.sam (everything is commented out) Connecting directly to modem using cable Checked \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Tried it on another laptop with exactly the specs as I have Then I tried Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser ok but only for a sec) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser not ok) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Any idea why it worked for a moment? Or better yet anything I havent tried or some error I may have overlooked?

    Read the article

  • How to Acitvate Window 7 on second computer

    - by Abdullah BaMusa
    I bought Windows 7 Professional which I installed it on my laptop. Now i decide to move it to be on my desktop PC, so I uninstall the windows from my laptop which I returned to the original OS came with the laptop (Vista Business) and insall windows 7 on my desktop PC. The problem is I cannot activate my copy of windows 7 on the desktop PC. and every time I try to activate it I get the error message " The product key you typed cannot be used to activate windows on this computer" and the code of the error is: Code: 0xc004c008 Description: The activation server determined that the specified product key could not be used. Hoe can I solve this problem.

    Read the article

  • Fatal error on "mode 120000" file during git -> svn migration

    - by Oliver
    Following instructions from the following website: http://code.google.com/p/support/wiki/ImportingFromGit I'm trying to migrate a git repository to svn, but during the "git rebase master tmp" step it fails with the following error after apply the first few patches: $ git rebase master tmp First, rewinding head to replay your work on top of it... Applying: Imported Applying: Cleaned up the readme file Applying: fix problem with versions fatal: unable to write file foobar mode 120000 Patch failed at 0003 fix problem with versions When you have resolved this problem run "git rebase --continue". If you would prefer to skip this patch, instead run "git rebase --skip". To restore the original branch and stop rebasing run "git rebase --abort". I understand that 120000 may refer to a symlink, but Subversion has supported symlinks for a long time now. Subversion installed is 1.6.5, Git is 1.6.3.3. Running on Ubuntu Linux. The system is not running out of disk space and this operation is taking place within my home directory so permissions should not be an issue.

    Read the article

  • Virtualmin - Added Virtual Server - Stopped access to Rails app?

    - by Dan
    Hi, Sorry if this sounds pretty simple, I'm new to Virtualmin and running servers in general. I recently purchased a VPS and installed Virtualmin with no problems. I then installed mod_rails and uploaded my first rails app, which I got working by adding the following to my apache httpd.conf file: <VirtualHost *:80> ServerName testing.mydomain.com DocumentRoot /home/myapp/public <Directory /home/myapp/public> Allow from All AllowOverride all Options -MultiViews </Directory> RailsBaseURI / </VirtualHost> I then tried adding a virtual server through Virtualmin, using mydomain.com. Now, the site this created (plus several sub-servers) and working as expected. However, my original Rails app is no longer accessible. The URL now sends me to the parent application (ie mydomain.com) The Rails app is not located within the parent's application directory, would this be a problem? Can anyone help? Any advice appreciated. Thanks.

    Read the article

  • How to restore jump list for Windows Explorer pinned taskbar icon?

    - by Dario Solera
    I pinned Windows Explorer's icon to my taskbar months ago, and all worked fine, including jump lists. Note: I changed the default Explorer's folder using the usual trick of changing the GUID in the shortcut. Now, all of a sudden, the jump list is empty, and dropping folders on the pinned icon does not produce any effect, nor recently-opened folders show up in the list (although in the taskbar options I made sure to have it remember recently open items). How can I restore the original functionality, given that all other pinned applications jump lists work correctly? I'm running Windows 7 Ultimate x64, updated with the latest patches. The OS is in US English and my locale is Italian-Italy.

    Read the article

  • Starting/Stopping IBM WebSphere Application Server (WAS) 7 from the Command Line

    - by Christopher Parker
    I've written a script to automate the process of starting, stopping, and restarting WAS7 from the command line. Nothing starts automatically on one of our staging servers, so I have to start everything: deployment manager, node agent, app server, and Web server. The script I wrote seems to work pretty well. A coworker of mine recommended that I structure my commands differently. I'm wondering if there's a good, valid reason for doing so. First, my variables: WAS_HOME="/opt/IBM/WebSphere/AppServer" WAS_PROFILE_NAME="AppSrv01" WAS_APP_SERVER="server1" WAS_WEB_SERVER="webserver1" How I had the start commands: "${WAS_HOME}/bin/startManager.sh" "${WAS_HOME}/bin/startNode.sh" -profileName $WAS_PROFILE_NAME "${WAS_HOME}/bin/startServer.sh" -profileName $WAS_PROFILE_NAME $WAS_APP_SERVER "${WAS_HOME}/bin/startServer.sh" -profileName $WAS_PROFILE_NAME $WAS_WEB_SERVER I was told that I should do it like this, instead: WAS_DMGR="Dmgr01" # Added variable "${WAS_HOME}/profiles/${WAS_PROFILE_NAME}/bin/startNode.sh" "${WAS_HOME}/profiles/${WAS_DMGR}/bin/startManager.sh" "${WAS_HOME}/profiles/${WAS_PROFILE_NAME}/bin/startServer.sh" $WAS_APP_SERVER "${WAS_HOME}/profiles/${WAS_PROFILE_NAME}/bin/startServer.sh" $WAS_WEB_SERVER How is the second way of starting up everything for WebSphere any better or more correct than the first, original, way?

    Read the article

  • Good free OCR with GUI for correcting mistakes? (for Windows)

    - by Hugh Allen
    I've used SimpleOCR, which has a nice GUI for correcting mistakes. Unfortunately it makes a lot of mistakes! (and suffers other bugs and limitations) On the other hand Tesseract is more accurate but has no GUI at all. Is there a free OCR program for Windows which has a nice GUI and a low error rate? I want it to highlight suspect words (by OCR uncertainty, not just spell checking) and show the original (bitmap) word while I'm editing the OCRed word similar to what SimpleOCR does. Open-source would be best, followed by freeware, then trial / demo / crippleware a long way behind.

    Read the article

  • MX Record for SubDomains

    - by Steve Sloka
    I want to be able to send email to any subdomain I like and not have to configure A records and MX records for each subdomain. Ideally I could send an email to [email protected] and [email protected] and not have to configure anything other than my original domain.com. My current setup: I have a domain (domain.com) and want to have multiple subdomains. (a.domain.com, b.domain.com, c.domain.com, etc). I have an MX record setup to point to domain.com and all email works fine for that domain. I have NOT setup A records for all the subdomains (and really don't want to).

    Read the article

  • Display won't come back from power saver mode

    - by tynor
    I wan't sure where exactly to post this question, but this one seemed the most relevant. I have a Dell LCD monitor running off a Dell Inspiron 531 tower with an Nvidia GeForce 8600 GT video card. Just recently, when I turn my computer on, the display immediately enters its "Power Saver" mode, and never wakes up. This problem doesn't occur with other computers, or even with this same computer when I use the integrated graphics. I have no other displays to test the card on. I have also tried replacing the power supply (my original one, which ran that video card for 4 years, was 300w, and I replaced it with 500w). Is there anything else I can try to troubleshoot this issue?

    Read the article

  • Is mismatched firmware on drives in a raid-6 a bad thing?

    - by bwerks
    Hi all, I recently expanded a raid-1 to a raid-6 with six drives. I ordered all four of the new drives from the same place, and all of them were advertised to be the same drives as the original two--Seagate 15krpm 146gb. However, when I was looking at the drives in the perc6/i utility, one of them appeared to be an earlier firmware version; it had S515, compared to the other five drives with S527. Sure enough, after inspecting the drive itself, the label advertised the earlier firmware version. Running Dell's SAS firmware upgrade utility should have in theory moved them all up to S52A, but when I ran it it moved the S527 drives up to S52A, and left the S515 drive untouched. Is this something to be worried about? If it's something that should be corrected, is there a way to target a particular drive for upgrade since the firmware utility didn't seem to do it by itself?

    Read the article

  • How do I recover missing partition. Windows 8 with recovery USB?

    - by Akbar Ali
    i bought a Samsung laptop with Windows 8 preinstalled. After a year I removed Windows 8 and installed Windows 7. Before removing Windows 8, I made a Windows 8 recovery USB. Now I want to get back my original Windows 8. When I used the USB, it said missing recovery partition or partition has been deleted. Can I install Windows 8 from the internet, and if I use my recovery USB will it activate Windows or not? Or is there any other way to do this task?

    Read the article

  • Toshiba Satellite error 10053A0000 when re installing windows xp home on an existing windows 7

    - by Jayapal Chandran
    I had installed windows 7 for testing. Now i want to re-install windows xp home original. I am using the toshiba installation(recovery) disk. The installation process asked a few questions. I selected the option to retain other partitions and to delete only c drive. In the next step i got this error. http://web1.toshiba.ca/support//techsupport/tsbs/all/-tsb001404.htm So, what should i do to retain my files in d drive and only allow the installation to delete c drive?

    Read the article

  • Using the Drop Box folder while sharing on Mac OS X, files are locked.

    - by vgm64
    While using the Drop Box in the Shared folder on two MacBook Pros running Mac OS X 10.6, I noticed that when files were dropped into the drop box they were read only (locked?) when going from one of the laptops to the other (but not necessarily the other direction). Is there a way to change this? My girlfriend nearly had an aneurism because she couldn't rename a file. I duplicated it and deleted the original, but this seems unnecessary. I remember the permissions on the file were: nobody: Read Only everyone: Read Only

    Read the article

  • Convert a gray PNG with alpha to a 1-bit black rectanble with 8-bit alpha

    - by jcayzac
    I use a tool to render LaTeX equations as PNG. The resulting images are in RGBA8888 format. I would like to extract the luminance (grayscale from RGB channels, multiplied by the A channel) as my new alpha channel, set the picture fully black, and save the result in Gray1Alpha8 (G1A8) format. So far I've only managed to get G1A4 or G8A8 but not G1A8. Also, the resulting picture looks like it's not multiplied correctly… convert original.png \ \( -clone 0 -alpha extract \) \ \( -clone 0 -clone 1 -compose multiply -composite \) \ -delete 0 +swap -alpha off -compose copy_opacity -composite -colorspace Gray -depth 4 result.png What am I missing?

    Read the article

  • Customized windows xp installation

    - by user23950
    How to create a customized version of an xp installation cd. I want a hand's off installation that will install all the themes, drivers , and applications I need without my intervention. How can I do that. I tried to make use of this software called Nlite. But when I tested the iso file using virtual box. The virtual box said that there's a certain file that cannot be copied. And by the way, before I customized the original iso image of windows xp sp3, it doesn't have the file copying problem that I mentioned above.

    Read the article

  • Using AHK PostMessage to send WM_WININICHANGE to Program Manager

    - by SaintWacko
    I've written a script which updates an environment variable, but I need to tell Program Manager to update the computer's programs with this new information. I was given this as the API call that is made within another program to cause this: ::SendMessage(::FindWindow("Progman", NULL), WM_WININICHANGE, 0L, (LPARAM)"Environment"); I am attempting to translate this into an AutoHotKey PostMessage call, but I'm doing something wrong, as it isn't working. Here's where I've gotten so far: PostMessage, 0x1A,, (LPARAM)"Environment", "Program Manager" Here are the AHK resources I've been looking at to do this: List of Windows Messages Send Messages to a Window or Its Controls PostMessage / SendMessage And here are the resources that I used to figure out the original API call: SendMessage function WM_WININICHANGE message Can anyone help me figure out what I'm doing wrong?

    Read the article

  • Creating hard drive backup images efficiently

    - by Arrieta
    We are in the process of pruning our directories to recuperate some disk space. The 'algorithm' for the pruning/backup process consists of a list of directories and, for each one of them, a set of rules, e.g. 'compress *.bin', 'move *.blah', 'delete *.crap', 'leave *.important'; these rules change from directory to directory but are well known. The compressed and moved files are stored in a temporary file system, burned onto a blue ray, tested within the blue ray, and, finally, deleted from their original locations. I am doing this in Python (basically a walk statement with a dictionary with the rules for each extension in each folder). Do you recommend a better methodology for pruning file systems? How do you do it? We run on Linux.

    Read the article

  • CPU I/O communication part 2

    - by b-gen-jack-o-neill
    Hi, I was suggested when I have some further questions on my older ones, to create newer Question and reffer to old one. So, this is the original question: CPU I/O communication OK, I have just 2 more questions. 1, How is MMIO set? I mean, lets say I have developed some extension card with PCI interface. How do you say to memory controller to redirect desired memory space to my card´s RAM? I mean, I think standart text-mode VGA MMIO adress is 0x8000. Is this HW set (every motherboard automatically redirects 0x8000 adress to PCI-E) or its just standart and can be changed (VGA says to motherboard: give me memory mapped IO at 0x8000) 2, Can one expansion card have more MMIO connections? I mean, lets say I have card with 10 Bytes of RAM. Can Bytes 0-4 be mapped to 0x0 and bytes 5-9 to 0x5000? Please, if you know about some good article about this, please post link. Thanks.

    Read the article

  • How to stop pptpd even when there are active vpn client connections?

    - by Michael Z
    After issued command to stop pptpd, the pptpd won't stop until all the VPN client has disconnected. The following code shows pptpd is still running after issuing the stop command. ubuntu@ip-10-138-31-87:~$ sudo /etc/init.d/pptpd stop Stopping PPTP: pptpd. ubuntu@ip-10-138-31-87:~$ ps -ef |grep pptpd root 5524 1 0 21:46 ? 00:00:00 pptpd [<myIp>:8544 - 0000] root 5525 5524 0 21:46 pts/1 00:00:00 /usr/sbin/pppd local file /etc/ppp/pptpd-options 115200 192.168.0.1:192.168.0.234 ipparam <myIP> plugin /usr/lib/pptpd/pptpd-logwtmp.so pptpd-original-ip <myIP> ubuntu 5564 4668 0 21:50 pts/4 00:00:00 grep --color=auto pptpd After all the active vpn client connections were disconnected mannually, the pptpd then stops. Is there a way that pptpd can be forced to stop even there are active vpn client connections?

    Read the article

  • How to get back to having OPEN IN SINGLE INSTANCE" as default for Excel 2007?

    - by rweeks
    In June Mikhail asked the same question but the answer was how to do the opposite (make multiple instances the default). I am trying to get to an answer to Mikhail's question which I rephrase as :- I have same problem with 64 byte Windows 7 and Excel 2007. Excel always used to open in a single instance n o matter how/where I opened the sheets. Because of this I could always copy and paste, etc with full formatting, formulas, etc. Suddenly, Excel switched to opening everything in fresh, separate, multiple instances and destroyed the basic cut and paste options. Wasn't the original question how to go back to everything in a single instance ? I have been searching for the answer to that question (rather than the opposite) Richard

    Read the article

  • keeping URL domain the same when pointing A record to a hosting account

    - by kwight
    Hello, I have a new WordPress website and a legacy billing system. For technical reasons, they cannot be on the same hosting plan. The hosting account for billing (and the original abc.com website) also manages DNS and mail. I'm trying to incorporate the new website under the same domain, eg. abc.com (website, on a different hosting account) and billing.abc.com (billing). I assume the answer is having a different A record for abc.com. I currently have a CPanel shared hosting account to use for the website (but can upgrade if necessary). How would I set this up in CPanel, so that the URLs work properly? Do I need a dedicated IP and then add the domain as an add-on domain? Thanks

    Read the article

  • MS Word reports files read-only on Win Server 2003 file server

    - by Larry Hamelin
    I'm not a sysadmin, but I play one on TV: I'm trying to fix a problem for my mom's tiny non-profit company's server. I set up a Windows Server 2003 machine as a domain controller and file server. Everything has been working well for a few months, but lately when she tries to save changes to a Word (Office XP) document stored on the server, Word will intermittently report that the file is read-only. Saving to an alternate file in the same directory works, and when she closes Word and re-opens the original document, it'll save changes just fine. No one else ever has these files open. I've checked security and share permissions, and everything's OK. We've tried rebooting the server, but the problem continues, but intermittently. I have no clue what's going on. Help!

    Read the article

  • Redirect email based on Source IP / Hostname

    - by PostMan
    So, we have a situation where we would like to be able to redirect (ignoring original destination) emails coming through out exchange server (locally sent) to a different email address. The situation is as follows: Testing a new server, this hosts a lot of our custom applications / scheduled tasks (as does the production version of this server). Instead of changing config files / parameters for these applications we'd rather leave them as they are, as we want to be as close to production as possible, however we don't want the emails go to the staff they would normally go to, we'd rather they were sent to a test email address where we are able to confirm the results. The emails look exactly like the production emails (same from / to / cc / bcc) except their source, hence why we'd like to know if the ability to redirect based on hostname exists. Cheers.

    Read the article

  • How to maintain the log source host using logstash

    - by Ray Rodriguez
    I am following the steps in this blog to set up rsyslog + logstash + graylog2 and I can't figure out how to replace the @source_host attribute in logstash using the mutate - replace filter. In the exmaple the author replaces his @source_host with a string value but I'd like to use the actual value that is parsed from in this case a syslog. mutate { type => loc1 replace => ["@source_host", "loc1"] } mutate { type => loc2 replace => ["@source_host", "loc2"] } How do I actually maintain the original source host in my logs?

    Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >