Search Results

Search found 4848 results on 194 pages for 'cocoa matters'.

Page 171/194 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

• *Un*installing with Ubuntu Software Center (Centre) doesn't work on 64-bit 12.04.1

  - by likethesky

  Not sure if I'm doing something wrong, or if the .deb package I'm installing is broken in some way (I've built it, using NetBeans 7.2), or if indeed this is a bug in Software Center. When I install this particular 32-bit .deb on Ubuntu 10.04 LTS--all updates applied--(where it was built), GDebi shows it and has an 'Uninstall' button next to it. So it works fine to uninstall it there, via the GDebi GUI. However, when I install it on 12.04.1 LTS--all updates applied--it installs fine, but then does not show up in Ubuntu Software Center as available to be uninstalled. No combination of searching finds it. However, I can from the command line, do sudo apt-get purge javafxapplication1 and it finds it and deletes it. The same thing happens when I build a 64-bit .deb and attempt to install it to the same (64-bit AMD) or a different 64-bit Ubuntu 12.04.1 system. So it seems to be isolated to this NetBeans-generated .deb and the 64-bit AMD build (though I haven't tried it on a 32-bit 12.04.1 install yet). These are all on VirtualBox VMs, btw, if that matters. Any way to 'clean up' my Software Center and see if it's something I've done to get it in this state? Could this behavior be due to how this particular .deb has been built? (It doesn't have an 'Installed-Size' control field, so I do get the "Package is of bad quality" warning when I install it--which I do by clicking 'Ignore and install' button.) If you want all the gory details about why this happening--a bug has been reported against NetBeans for this behavior here: http://javafx-jira.kenai.com/browse/RT-25486 (EDIT: Just to be clear, the app installs fine, runs fine, all works as intended--I just can't get that 'bad package' message to go away, and now... I also can't uninstall it via Software Center, but rather, need to use sudo apt-get purge to uninstall it, after it installs. /END EDIT) Thanks for any pointers. I'm happy to report this as a bug against Ubuntu Software Center/Centre too, if that's what it seems to be, just tell me where to do so (a link). I'm a relative Ubuntu, NetBeans, and JavaFX newbie, though a long-time programmer. If I report it as a bug, I'll try it on the 32-bit build of 12.04.1 as well. Also, if I should add any more detail to the bug reported against NetBeans above, let me know--or feel free to add it yourself to the bug report above, if you would like. Thanks again!

  Read the article

• Unable to boot ubuntu 11.10 from external usb drive

  - by user45006

  I'm new to Ubuntu (and actually all things Linux) as of this morning, so please excuse any stupid mistakes I may be making. I recently bought an external hard drive for my newly built PC (that is running windows 7 if it matters). I would like to install Ubuntu onto the external drive and boot from there. I downloaded Ubuntu 11.10 and made a bootable cd, unplugged my internal HDDs, plugged in the external drive, installed Ubuntu 11.10 on the external drive via the installer, and replugged in my internal HDDs. Then I set my bios boot order to: Boot from USB-HDD - Boot from Hard Disk - Boot from CD/DVD. Now when I restart I get the message "Starting Operating System..." (or something like that, I forget exactly what it says) that lingers on the screen for a moment and then windows starts. Any idea what the problem may be? ~Relevant info~ BIOS version: Award Software International, Inc. F2, 2/22/2011 Ubuntu Version: 11.10 External Hard Drive: Western Digital My Passport Essential 500GB Portable Hard Drive (Black) ~Things I've already tried~ 1) Unplug internal HDDs so that only external drive was plugged in via usb. Same thing happened only obviously my BIOS could not detect any hard drives besides the external one. When booting received error "Could not detect operating system" 2) Formatted external hard drive and re installed. It didn't make a difference, however interestingly when I booted from cd the ubuntu installer said it detected ubuntu 11.10 on the external hard drive. 3) Within BIOS I've messed around with every boot order combo I could think of both in the "Hard Disk boot order" screen and the "Boot order" screen. I'm a little confused of why there are two screens for this. 4) Held F12 during startup which opens (what I think is) the one time boot screen and it gave me the options "Hard Drive", "cd/dvd", "USB-FDD", "USB-cdrom", "USB-HDD", and "USB-something else I can't remember what it was". I tried all of them, but the same thing as before happened each time. ~References~ I noticed several people on askubuntu have tried to do something similar if not the exact same. In fact, I even found a post that pretty much outlines step by step exactly what I did... only their's worked. /jealous. Linky: Install Ubuntu or Kubuntu on a External USB Drive I'm willing to try a different version of ubuntu - it's not like my heart is set on 11.10, but it's a pain to open my case and unplug my internal hard drives so I'd prefer not to do this unless someone is reasonably confident it'll work. Thank you for all of your help in advance! I'm really looking forward to exploring Ubuntu!

  Read the article

• ArchBeat Link-o-Rama for 2012-08-29

  - by Bob Rhubart

  ORCLville: OOW 2012 - Crystal BallOracle ACE Director Floyd Teter cooks up some tongue-in-cheek predictions for news and announcements that might come out of Oracle OpenWorld 2012. What's your prediction? Oracle Optimized Solutions at Oracle OpenWorld 2012 | Oracle Hardware Hardware matters, too! The people behind the Oracle Hardware blog have put together a list of Oracle Openworld 2012 sessions focused Oracle Optimized Solutions, "designed, pre-tested, tuned and fully documented architectures for optimal performance and availability." Just plug the session ID numbers into Schedule Builder and you're good to go. AIX Checklist for stable OBIEE deployment | Dick Dunbar "OBIEE is a complicated system with many moving parts and connection points," according to Oracle Business Inteligence escalation engineer Dick Dunbar. "The purpose of this article is to provide a checklist to discuss OBIEE deployment with your systems administrators." Demo for OPN: Coherence Management with EM Cloud Control 12c Oracle Partner Network members can check out a new Coherence Management demo that showcases some of the key capabilities of Management Pack for Oracle Coherence and JVM Diagnostics. "The demo flow showcases the key enhancements made in Enterprise Manager 12c release which includes new customizable performance summary, cache data management and configuration management," according to the WebLogic Partner Community EMEA blog. The Pragmatic Architect: To Boldly Go Where No One Has Gone Before | Frank Buschmann "Many architects have technical knowledge that's both impressive and sound, which is indeed an inevitable basis for design success," says Frank Buschmann. "Yet, a lot of software projects fail or suffer due to severe challenges in their architecture. The key to mastery is how architects approach design, what they value, and where they focus their attention and work." As retail dies, whom will be the winners? | Peter Evans-Greenwood "The problem for many retailers is that how consumers shop has changed but the the retailers haven't adapted, " says Peter Evans-Greenwood. "Their sole virtue was to be the last step in a supply chain delivering somebody else's products to the consumer. However, being the last step in the supply chain is no longer a virtue when consumers skip across channels and can reach around the globe, no longer dependant on or limited to what they can find locally." Thought for the Day "Brains require stimulation. If you're locked into a pattern of work, work, and more work, your brain soon habituates - the same way that it lets you stop hearing a clock ticking. So, if you want to be more effective at work, you must, paradoxically, be less single-minded in your devotion to work. Anything you do—anything—that stimulates new segments of your brain will make you a more effective programmer or analyst. I promise, with a money-back guarantee." — Gerald M. Weinberg Source: SoftwareQuotes.com

  Read the article

• Representing complex object dependencies

  - by max

  I have several classes with a reasonably complex (but acyclic) dependency graph. All the dependencies are of the form: class X instance contains an attribute of class Y. All such attributes are set during initialization and never changed again. Each class' constructor has just a couple parameters, and each object knows the proper parameters to pass to the constructors of the objects it contains. class Outer is at the top of the dependency hierarchy, i.e., no class depends on it. Currently, the UI layer only creates an Outer instance; the parameters for Outer constructor are derived from the user input. Of course, Outer in the process of initialization, creates the objects it needs, which in turn create the objects they need, and so on. The new development is that the a user who knows the dependency graph may want to reach deep into it, and set the values of some of the arguments passed to constructors of the inner classes (essentially overriding the values used currently). How should I change the design to support this? I could keep the current approach where all the inner classes are created by the classes that need them. In this case, the information about "user overrides" would need to be passed to Outer class' constructor in some complex user_overrides structure. Perhaps user_overrides could be the full logical representation of the dependency graph, with the overrides attached to the appropriate edges. Outer class would pass user_overrides to every object it creates, and they would do the same. Each object, before initializing lower level objects, will find its location in that graph and check if the user requested an override to any of the constructor arguments. Alternatively, I could rewrite all the objects' constructors to take as parameters the full objects they require. Thus, the creation of all the inner objects would be moved outside the whole hierarchy, into a new controller layer that lies between Outer and UI layer. The controller layer would essentially traverse the dependency graph from the bottom, creating all the objects as it goes. The controller layer would have to ask the higher-level objects for parameter values for the lower-level objects whenever the relevant parameter isn't provided by the user. Neither approach looks terribly simple. Is there any other approach? Has this problem come up enough in the past to have a pattern that I can read about? I'm using Python, but I don't think it matters much at the design level.

  Read the article

• Cloning a dual boot system from HDD to SSD

  - by Alex

  I'm planning on replacing my laptop's HDD with a 256GB SSD, but I have a dual-boot (12.04 and Windows 7) setup and I'd like to be able to directly migrate Ubuntu over without having to reinstall and lose all of my settings. GParted reports the following partition setup on my HDD. I am, of course, able to modify it if necessary. /dev/sda1 (NTFS) 66.92 out of 200.00 MB used I'm honestly not sure what this partition is for. Maybe for Windows 7 system files? I'm hesitant to mess with it. (edit; it turns out it is a partition for Windows recovery files in the event of OS corruption, so I don't want to remove it. Plus it also appears to be a major pain to remove anyways) /dev/sda2 (NTFS) 116.35 out of 339.06 GB used (boot) This partition is the C:/ drive on my Windows installation. I don't use it on my Ubuntu installation, except it is the boot partition and thus has grub on it. /dev/sda4 (extended) > /dev/sda5 (ext4) 14.49 out of 91.34 GB used > /dev/sda6 (linux-swap) 5.92 GB These are my Ubuntu partitions. /sda5 contains my documents and all of the files I use on Ubuntu, and (as far as I know) the system files for Ubuntu itself (it's the partition I created when prompted by the Live-DVD installer). /sda6 is, of course, the swap partition which I only need for hibernation (6GB of RAM). /dev/sda3 (NTFS) 9.89 out of 14.75 GB used This is an annoying partition that Lenovo created to store some drivers and files that I might need later on. For example, it allows me to use OneKeyRecovery for a quick factory recovery if absolutely necessary, not sure if that'll work on an SSD. It also contains not-so-important files for bloatware installation. In total, my HDD only has about 150GB of files on it so it should fit comfortably on the SSD. The problem is, I want to exactly migrate my files, partitions, OSes, MBR, etc. from my HDD to my SSD and I'm not quite sure how to do this. I've seen CloneZilla referenced before, but I'm not all too experienced and the documentation for it quite frankly seems a bit like a foreign language to me. So, put simply, is there any way I can exactly clone this HDD to an SSD without a massive headache? Also, if it matters, I'll probably be using an external hard drive case (as recommended in online tutorials) to externally attach the SSD to my laptop during the cloning process due to the lack of two hard drive slots in the machine.

  Read the article

• Why does switching users completely hang my system every time?

  - by Stéphane

  I have a fresh install of 11.04 64bit, with 2 administrator accounts and 4 normal accounts. The 4 normal accounts (the kids' accounts) don't have passwords, they can login simply by clicking on their names. When any of the users -- either admin or normal -- tries to switch to another account by clicking in the top-right corner of the screen and selecting another user, the screen goes black and the entire system locks up. Even CTRL+ALT+F1 through F7 does nothing. This is reproducible 100% of the time on this system. I can ssh into the box when the console locks up, and by running top, I see that Xorg is consuming about 100% of the CPU. Looking at the output of "ps axfu" in bash while the system is in this "locked up" state, here is the lightdm and X process tree: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1153 0.0 0.1 183508 4292 ? Ssl Dec26 0:00 lightdm root 2187 0.4 4.6 265976 164168 tty7 Ss+ 00:43 0:21 \_ /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch stephane 2612 0.0 0.3 266400 10736 ? Ssl 01:52 0:00 \_ /usr/bin/gnome-session --session=ubuntu stephane 2650 0.0 0.0 12264 276 ? Ss 01:52 0:00 | \_ /usr/bin/ssh-agent /usr/bin/dbus-launch --exit-with-session /usr/bin/gnome-session --session=ubuntu stephane 2703 0.8 3.0 562068 106548 ? Sl 01:52 0:08 | \_ compiz stephane 2801 0.0 0.0 4264 584 ? Ss 01:52 0:00 | | \_ /bin/sh -c /usr/bin/compiz-decorator stephane 2802 0.0 0.3 265744 13772 ? Sl 01:52 0:00 | | \_ /usr/bin/unity-window-decorator ...cut... root 3024 80.6 0.3 107928 13088 tty8 Rs+ 01:53 12:34 \_ /usr/bin/X :1 -auth /var/run/lightdm/root/:1 -nolisten tcp vt8 -novtswitch That last process, pid #3024 in this case, is what has the CPU pegged. In case it matters (I suspect it might) here is what I think may be the relevant information for my video card, taken from /var/log/Xorg.0.log: [ 3392.653] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so [ 3392.653] (II) Module glx: vendor="FireGL - AMD Technologies Inc." [ 3392.653] compiled for 6.9.0, module version = 1.0.0 ... [ 3392.655] (II) LoadModule: "fglrx" [ 3392.655] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so [ 3392.672] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 3392.672] compiled for 1.4.99.906, module version = 8.88.7 [ 3392.672] Module class: X.Org Video Driver ... [ 3392.759] (==) fglrx(0): ATI 2D Acceleration Architecture enabled [ 3392.759] (--) fglrx(0): Chipset: "AMD Radeon HD 6410D" (Chipset = 0x9644) Lastly: I did see this posting: Change user on 11.10 hangs system ...but I checked, and the libpam-smbpass package isn't installed on this system.

  Read the article

• Data Transformation Pipeline

  - by davenewza

  I have create some kind of data pipeline to transform coordinate data into more useful information. Here is the shell of pipeline: public class PositionPipeline { protected List<IPipelineComponent> components; public PositionPipeline() { components = new List<IPipelineComponent>(); } public PositionPipelineEntity Process(Position position) { foreach (var component in components) { position = component.Execute(position); } return position; } public PositionPipeline RegisterComponent(IPipelineComponent component) { components.Add(component); return this; } } Every IPipelineComponent accepts and returns the same type - a PositionPipelineEntity. Code: public interface IPipelineComponent { PositionPipelineEntity Execute(PositionPipelineEntity position); } The PositionPipelineEntity needs to have many properties, many which are unused in certain components and required in others. Some properties will also have become redundant at the end of the pipeline. For example, these components could be executed: TransformCoordinatesComponent: Parse the raw coordinate data into a Coordinate type. DetermineCountryComponent: Determine and stores country code. DetermineOnRoadComponent: Determine and store whether coordinate is on a road. Code: pipeline .RegisterComponent(new TransformCoordinatesComponent()) .RegisterComponent(new DetermineCountryComponent()) .RegisterComponent(new DetermineOnRoadComponent()); pipeline.Process(positionPipelineEntity); The PositionPipelineEntity type: public class PositionPipelineEntity { // Only relevant to the TransformCoordinatesComponent public decimal RawCoordinateLatitude { get; set; } // Only relevant to the TransformCoordinatesComponent public decimal RawCoordinateLongitude { get; set; } // Required by all components after TransformCoordinatesComponent public Coordinate CoordinateLatitude { get; set; } // Required by all components after TransformCoordinatesComponent public Coordinate CoordinateLongitude { get; set; } // Set in DetermineCountryComponent, not required anywhere. // Requires CoordinateLatitude and CoordinateLongitude (TransformCoordinatesComponent) public string CountryCode { get; set; } // Set in DetermineOnRoadComponent, not required anywhere. // Requires CoordinateLatitude and CoordinateLongitude (TransformCoordinatesComponent) public bool OnRoad { get; set; } } Problems: I'm very concerned about the dependency that a component has on properties. The way to solve this would be to create specific types for each component. The problem then is that I cannot chain them together like this. The other problem is the order of components in the pipeline matters. There is some dependency. The current structure does not provide any static or runtime checking for such a thing. Any feedback would be appreciated.

  Read the article

• How to manage a Closed Source High-Risk Project?

  - by abel

  I am currently planning to develop a J2EE website and wish to bring in 1 developer and 1 web designer to assist me. The project is a financial app with a niche market. I plan to keep the source closed . However, I fear that my would-be employees could easily copy the codebase and use it /sell it to a third party especially when they switch jobs. The app development will take 4-6months and perhaps more and I may have to bring in people after the app goes live. How do I keep the source to myself. Are there techniques companies use to guard their source. I foresee disabling pendrives and dvd writers on my development machines, but uploading data or attaching the code in one's mail would still be possible. My question is incomplete. But programmers who have been in my situation, please advice. How should I go about this? Building a team, maintaining code-secrecy,etc. I am looking forward to sign a secrecy contract with the employees if needed too. (Please add relevant tags) Update Thank you for all the answers. I certainly won't be disabling all USB ports and DVD writers now. But I think I should be logging activity(How exactly should I do that?) I am wary of scalpers who would join and then run off with the existing code. I haven't met any, but I have been advised to be wary of them. I would include a secrecy clause, but given this is a startup with almost no funding and in a highly competitive business niche with bigger players in the field, I doubt I would be able to detect or pursue any scalpers. How do I hire people I trust, when I don't know them personally. Their resume will be helpful but otherwise trust will develop only with time. But finally even if they do run away with the code, it is service that matters after the sale is made. So I am not really worried for the long term.

  Read the article

• Layout of mathematical views (iOS)

  - by William Jockusch

  I am trying to figure out the right way to encapsulate graphical information about mathematical objects. It is not simple. For example, a matrix can include square brackets around its entries, or not. Some things carry down to sub-objects -- for example, a matrix might track the font size to be used by its entries. Similarly, the font color and the background color would carry down to the entries. Other things do not carry down. For example, the entries of the matrix do not need to know whether or not the matrix has those square brackets. Based on all of the above, I need to calculate sizes for everything, then frames. All of this can depend on the properties stored above. The size of a matrix depends on the sizes of its entries, and also on whether or not it has those brackets. What I am having a hard time with is not the individual ways to calculate sensible frames for this or that. It is the overall organizational structure of the whole thing. How can I keep track of it all without going crazy. One particular obstacle is worth mentioning -- for reasons I don't want to go into here, I need to calculate the sizes and frames for everything before I instantiate any actual views. So, for example, if I have a Matrix object, I need to calculate its size before I make a MatrixView. If I have an equation, I need to calculate the size of the view for the equation before I create the actual view. So I clearly need separate objects for those calculations. But I can't figure out a sensible class structure for those objects. If I put them all into a single class, I get some advantages because copying then becomes easy. But I also end up with a bloated class that contains info that is irrelevant for some objects -- such as whether or not to include those brackets around the matrix. But if I use a lot of different classes, copying properties becomes a real pain. If it matters, this is all in Objective C, for an iOS environment. Any pointers would be greatly appreciated.

  Read the article

• How to optimise mesh data

  - by Wardy

  So i have some procedurally generated mesh data and i want to reduce it down to its minimum number of verts. In case it matters this is a unity project. Working on the basis of a simple example, lets assume a typical flat surface of points 2 by 3. The point / vertex at [1,1] is used in many triangles. I've generated mesh for a voxel type engine that adds verts to a list based on face visiblility and now I want to remove all the duplicates. Can anyone come up with an efficient way of doing this because what i have is sooo bad its not even funny (and i don't even think it's logically correct) ... private void Optimize() { Vector3 v; Vector3 v2; for (int i = 0; i < Vertices.Count; i++) { v = Vertices[i]; for (int j = i+1; j < Vertices.Count; j++) { v2 = Vertices[j]; if (v.x == v2.x && v.y == v2.y && v.z == v2.z) { for (int ind = 0; ind < Indices.Count; ind++) { if (Indices[ind] == j) { Indices[ind] = i; } else if (Indices[ind] > j && Indices[ind] > 0) Indices[ind]--; } Vertices.RemoveAt(j); Uvs.RemoveAt(j); Normals.RemoveAt(j); } } } } EDIT: Ok i managed to get this (code sample above updated) to render an "optimised" set of verts but the UV data is all wrong now, which would make sense because i'm basically just removing any UV Vector that represents a UV coord for a removed vert and not actually considering what I need to do to "fix the tri" so to speak. The code now seemingly does work but its quite time consuming, still looking to further optimise.

  Read the article

• Setting up Ubuntu on my mother's computer

  - by idealmachine

  Intended use My mother had an old Compaq desktop computer running Windows 98, which she used for occasional Web browsing and playing cards. The name of her card game is Hoyle Card Games 3. Although I had to repair it several times over the last 10 years, it worked fine until it finally died at the end of last year. Hardware specifications A relative brought up a newer computer soon afterward: Operating system: Windows XP Asus K8N motherboard (with broken on-board sound; getting a sound card) Athlon 64? processor (don't remember the clock speed) 512 MB RAM Hope the graphics card works... Replacement sound card will be one of: Ensoniq ES1370 AudioPCI Diamond Monster Sound MX300 (Aureal chipset) Sound Blaster Audigy 2 SE Peripherals HP Scanjet 3400c scanner (USB connected) HP LaserJet multi-function printer (parallel port connected, and printing works with a PCL driver) Same serial mouse as old computer Question I had set up an SSH/VNC connection to allow for remotely working out problems. Or so I thought. A month later, the computer would not boot, rendering the SSH connection useless and an OS reinstall necessary. Unfortunately, I have neither the original Windows disc nor the product key. Unless I were to pay $200 for a full Windows 7 Home Premium license for my computer, I would not be able to re-install Windows XP on hers. I consider myself an advanced Linux user, having used Debian for years. So here are my questions. I have only one day to decide whether to use Ubuntu or buy Windows: A quick search leads me to believe all the hardware listed above is supposed to work with Linux, but am I mistaken? Would Ubuntu/Xubuntu suffice (specify which one if it matters), or would I be better off paying the $200 necessary for Windows XP? Is the card game likely to run on Wine? I believe the minimum system requirement is Windows 95. Failing Wine compatibility, will VirtualBox run fast enough on such a computer (Windows 98 as the guest OS)? Are there any free card games just as good? She plays mainly Bridge, Poker, and Solitaire. Is there any "Large Fonts" option for those with poor vision? The lack of it would be a big disadvantage. BONUS: Although I would probably replace the old mouse upon a move to Ubuntu, is it even possible to get a serial mouse working?

  Read the article

• Does the method of adjustment matter, or just the final calibration?

  - by Steve

  A company produces software (and hardware) that is used to both perform automatic adjustments on electronic test equipment as well as perform calibrations of the same equipment. The results of the calibrations are put onto a certificate of calibration that is sent to the customer along with the equipment. This calibration certificate states various conditions of the calibration, such as what hardware (models/serial numbers) and software (version) was used to perform the calibration, as well as things like environmental conditions, etc. Making the assumption that the software used to produce the data (and listed on the calibration certificate) used on the certificate of calibration must have gone through a "test/release" process and must be considered "released" software - does this also mean that the software used for adjustment must also be released? I believe that the method (software/environmental conditions/etc) used or present during adjustment doesn't matter, all that really matters is the end result of the calibration, the conditions present during the calibration, and whether or not the equipment was within the specifications. The real question I'm hoping to get answered: Is there a reputable source (e.g. NIST or somewhere similar) that addresses this question? (I have searched...) The thinking is that during high volume production runs, the "unreleased" system can be used to perform adjustments, as long as a released system is used to perform the calibrations, since the time required to perform the adjustments is much longer than the calibration. This unreleased system will eventually become released for use, but currently is not. Also, please not that there is a distinction between "adjustment" and "calibration". The definition from BIPM International vocabulary of metrology, 2.39: Operation that, under specified conditions, in a first step, establishes a relation between the quantity values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties (of the calibrated instrument or secondary standard) and, in a second step, uses this information to establish a relation for obtaining a measurement result from an indication. Followed by NOTE 2 (emphasis in original text): Calibration should not be confused with adjustment of a measuring system, often mistakenly called "self-calibration", nor with verification of calibration As a side note, I'm not sure why this got down voted. It's regarding software and it's use before and after release for use. I believe there is a best practice that can be applied and this is (hopefully) not primarily opinion based.

  Read the article

• External hard drive issue

  - by Blind Fish

  I am running Ubuntu 12.04 and I have a 500GB external hard drive, formatted in ext4, which I have used for about a year to store batches of data that I am sifting through. About once a week I move a chunk of data from the external drive to my internal drive for processing. As I do that I delete the data from the external drive and empty the trash, thereby clearing up space on the external and also preventing myself from grabbing stuff that I've already sorted through. The vast majority of this is text files, but there are a few .jpegs and .mp4s thrown in, if that matters. Anyway, this has been working without a hitch for nearly a year. So today I plug in the drive and I have an odd issue. I was able to move folders from the external over to my internal drive with no problem, but when I tried to delete those files I was unable to do so. I kept getting the "unable to send file to trash, do you wish to delete permanently?" message. I clicked yes / delete all, but no files were actually deleted. It just sat there. Even worse, while the system was trying in vain to delete those files I was unable to move more files over. In short, I was stuck. I canceled the operation, unmounted and remounted the drive, and then I had an even bigger problem. I have a spreadsheet of all the different folders on there ( exactly 818 ) and yet when I opened the drive in Nautilus, it was only finding 512 folders. So I had 306 missing folders, but my free space was unchanged. Immediately I think that the drive may be corrupted. I went into Disk Utility and ran the check disk option. It said that the drive was NOT clean, but offered no remedy or option to repair. I went back into the drive in Nautilus and once again attempted to delete the files I had already moved. Same issue. I clicked on Details and it said that it was unable to create a trashing file I/O error. I've looked, and it's not a permissions issue. The drive and all folders that are in it all belong to me, and they are all read / write. I've started running badblocks on the drive, but it looks like that is going to take several hours to complete. Any ideas?

  Read the article

• 2D Collision in Canvas - Balls Overlapping When Velocity is High

  - by kushsolitary

  I am doing a simple experiment in canvas using Javascript in which some balls will be thrown on the screen with some initial velocity and then they will bounce on colliding with each other or with the walls. I managed to do the collision with walls perfectly but now the problem is with the collision with other balls. I am using the following code for it: //Check collision between two bodies function collides(b1, b2) { //Find the distance between their mid-points var dx = b1.x - b2.x, dy = b1.y - b2.y, dist = Math.round(Math.sqrt(dx*dx + dy*dy)); //Check if it is a collision if(dist <= (b1.r + b2.r)) { //Calculate the angles var angle = Math.atan2(dy, dx), sin = Math.sin(angle), cos = Math.cos(angle); //Calculate the old velocity components var v1x = b1.vx * cos, v2x = b2.vx * cos, v1y = b1.vy * sin, v2y = b2.vy * sin; //Calculate the new velocity components var vel1x = ((b1.m - b2.m) / (b1.m + b2.m)) * v1x + (2 * b2.m / (b1.m + b2.m)) * v2x, vel2x = (2 * b1.m / (b1.m + b2.m)) * v1x + ((b2.m - b1.m) / (b2.m + b1.m)) * v2x, vel1y = v1y, vel2y = v2y; //Set the new velocities b1.vx = vel1x; b2.vx = vel2x; b1.vy = vel1y; b2.vy = vel2y; } } You can see the experiment here. The problem is, some balls overlap each other and stick together while some of them rebound perfectly. I don't know what is causing this issue. Here's my balls object if that matters: function Ball() { //Random Positions this.x = 50 + Math.random() * W; this.y = 50 + Math.random() * H; //Random radii this.r = 15 + Math.random() * 30; this.m = this.r; //Random velocity components this.vx = 1 + Math.random() * 4; this.vy = 1 + Math.random() * 4; //Random shade of grey color this.c = Math.round(Math.random() * 200); this.draw = function() { ctx.beginPath(); ctx.fillStyle = "rgb(" + this.c + ", " + this.c + ", " + this.c + ")"; ctx.arc(this.x, this.y, this.r, 0, Math.PI*2, false); ctx.fill(); ctx.closePath(); } }

  Read the article

• SQL Saturday 194 - Exeter

  - by Dave Ballantyne

  Many kudos goes to Jonathan and Annette Allen and the others on the team for confirming SQL Saturday 194 in Exeter on the 8th and 9th of March.  The event home page is here http://www.sqlsaturday.com/194/eventhome.aspx and I delighted that myself and Dave Morrison will be presenting a full day pre-con on the 8th on favourite subjects “TSQL and Internals”. Here is the full abstract : TSQL and internals - When faced with performance issues there are many lines of attack. Tuning the engine itself can get you so far, however for maximum effect you need to understand how the engine and how it translates SQL statements into performable actions. This is not a simple task, it is a massive task to deal with a multi-table join and the number of permutations can be immense. To back up this knowledge, we can create better performing TSQL and understand the impact that is has upon the engine and recognize the pitfalls and gotcha’s that exist in SQLServer. Ultimately, there is no ‘best way’ to perform a single task only many variations of ‘it depends’ , but now we can pick the most appropriate option for the required dataload. Over the years, there have been many myths and misconceptions have grown around the product, some have basis in older versions and some are just wrong. Continuing to build on the knowledge given so far these issue will be explored and broken down and proved or disproved. Finally we will look to the future and explore SQL Server 2012 and the new functionality that that brings and some of the common uses that we will be able to address. After completion of this days pre-con, attendees will have a more complete knowledge of execution plans, and how they relate to the physical and logical actions that SQLServer will be executing on their behalf. The attendees will also have a more rounded and fuller knowledge of TSQL and the implications of incorrectly defining a query. Dave is a fountain of knowledge on execution plans and optimizer internals and ,though i may flatter myself, I’m no shrinking violet when it comes to TSQL and such matters.  I hope that if you cant join us, then there are other pre-cons available from other experts in their fields that may ‘float you boat’ too.  The pre-con page is http://sqlsouthwest.co.uk/SQLSaturday_precon.htm Also, excitingly, this pre-con day is sponsored by Fusion-IO which is a great boon for the day. If you want a more of this then i am offering a 2 day TSQL course starting on the 19th of March. More details on this are available here

  Read the article

• Storing a looong lookup table

  - by inquisitive

  Background The product i am working on has a very long lookup-table. the table contains static data and cannot be auto generated. there are about 500 rows and 10 columns. columns have mostly integers and strings. to complicate the matters, there are actually two such tables. every row in table-1 maps to zero-or-more rows in table-2. we use an SQLite database with two tables. the product installer places the SQLite file in the installation directory. the application is written in dot-net and we use ADO to load the data once on startup. now, the lookup table grows. in each release a month, we add about 10 new entries existing entries are adjusted. every release we fine tune existing entries. The problem a team of (10) developers work on the lookup table. Code goes in the SVN, but the little devil the SQLite does not. this prevents multiple developers to work on it. we do take regular backups of the file, but proper versioning is not possible. we never know who did the breaking change. the worse thing is we dont know if there is any change at all. diff'ing databases is tedious if not impossible. the tables are expected to grow quite large in years to come and we would need developers to work in parallel on it. the data is business critical. we need to be able to audit changes made to it. Question What would be a solution for the problems outlines above? one idea was to transform the whole thing to XML and treat it like just another source file. that way SVN can do the versioning and we can work in parallel. but the data shows relational behavior. with XML we loose the unique and foreign-key constraints. also we cant query it with sql like ease. any help here will be appreciated.

  Read the article

• Imperative vs. component based programming [closed]

  - by AlexW

  I've been thinking about how programming and more specifically the teaching of programming is advocated amongst the community (online). Often I've heard that Ruby and RoR is an ideal platform for learning to program. I completely disagree... RoR and Ruby are based on the application of the component based paradigm, which means they are ideal for rapid application development. This is much like the MVC model in PHP and ASP.NET But, learning a proper imperative language like Java or C/C++ (or even Perl and PHP) is the only way for a new programmer to explore logic itself, and not get too bogged down in architectural concerns like the need for separation of concerns, and the preference for components. Maybe it's a personal preference thing. I rather think that the most interesting aspects to programming are the procedural bits of code I write that actually do stuff rather than the project planning, and modelling that comes about from fully object oriented engineering or simply using the MVC model. I know this may sound confused to some of you. I feel strongly though that the best way for programming to be taught is through imperative and procedural methods. Architectural (component) methods come later, if at all. After all, none of the amazing algorithms that exist were based on OOP practice! It's all procedural code when it comes to the 'magic'. OOP is useful in creating products and utilities. Algorithms are what makes things happen, and move data around, and so imperative (and/or procedural) code are what matters most. When I see programmers recommending Ruby on Rails to newbie developers, I think it's just so wrong. Just because you write less code with Ruby does not make it easier to do! It's the opposite... you have to know loads more to appreciate its succinct nature. New coders who really want to understand the nuts and bolts of coding need to go away and figure out writing methods/functions (i.e. imperative programming) and working in procedural style, in order to grasp the fundamentals, first, before looking into architectural ways of working. So, my question is: should Ruby ever be recommended as a first language? I think no (obviously)... what arguments are there for it?

  Read the article

• Need Help with partitions and such Dual Booting 13.10 w/ windows 7

  - by Aymax

  so I've spent the past couple days freaking out about this and looking for answers, and I decided to resort to asking on forums. probably should have before I wasted 2 entire days. so I am trying to DUAL-INSTALL Ubuntu 13.10 with my x64 Windows 7 home premium computer. I have 6 gb of ram, 1TB hard drive, and a 3.3GHZ dual core processer (just in case it matters). I've managed to figure some things out. I've burned the ubuntu files onto a DVD, and I have been able to successfully run it off the disk. I also shrunk my Windows partition by 120Gb and partitioned that for Ubuntu (all using the windows Disk Manager). Problems: When I turn my computer on with the DVD in the tray, the computer cant find windows. it flashes a screen real quick that says something about not being able to find an operating system, and then goes to "grub" and asks what i want to do with Ubuntu. this scares me, because I don't know if that means that I will not be able to boot windows if I install Ubuntu. The Ubuntu 13.10 installer does not detect my Windows operating system. I only have the options to Erase everything on my drive, or "something else." I choose that, which brings me to 3 I don't understand the partition table. I have no idea which drive im selecting to install stuff on, much less which one to select. I tried to tell by the amount of memory partitioned off, but none of the numbers seem to be accurate. Plus, all the names are dev/sda(#). I know Ubuntu knows the name of my partition, because on the sidebars it shows the names of the different drives, including the partition I made; so why don't they use the names? I have no idea what I'm going to be erasing. I've read that I should know which is which by the file system type, but they are all NTFS, including the one I made. my only other option was FAT, none for EXT2 or any of that like people said to do. My main concerns are that of accidentally erasing windows or not being able to access windows. any feasible solution is helpful, weather it helps me with the install or to make Ubuntu see windows. I realize this question has been asked much, but i have found no feasible answers so far. I am relatively new to this, and have never installed an operating system before, so I do not know most of the jargon. please keep it relatively simple, please. I am not a programmer. Thanks.

  Read the article

• Did I choose proper career path? [closed]

  - by Liston Catch

  I am a C# Junior. My company has it's own enterprise documents-flow system written, my job along with 10 other programmers is to write modules/add-ons for it. I am totally bored of this job, I dont like Microsoft's technologies stack (dont hate me here, just subjective), but it's plain boring, enterprise is boring (subjective again, everyone's tastes differ), days on this work last long and I am tired of it. In short - I dont like my job. In my spare time I am doing PHP-development and I totally like it. I am also doing web-design, so I am LAMP-kind of guy who loves his Ubuntu and does design aswell. I know that most programmers don't do design themselves, so some person is either all about design or all about coding, but I enjoy both and do both. I often get interesting sites orders, I love to make whole websites with all the design, I love the feeling of site completeness, I enjoy talking with customers. I like that PHP is simple and skill cap is lower than one of java, meaning I can become expert in it after some years. But C# (and J2EE also) pay more, and I am doing really good in C#. But I dont like it. I can go for J2EE, platform itself seems more fun to me rather than .NET, but EE development is still boring to me. But it seems higher payed, easier to find job (since PHP is too common for its easiness. But if you are expert in something it doesnt matter, right? Just a higher skillcap.) Question: I want to go on with freelance. I want to have an opportunity to start my own startup in web. Actually I have a browser-game already written by myself, it earns me around 500$ per month which I am really proud of since I am 21 only and still noob in coding. I want to find part-time PHP job. 3 days per week so I can get some stable income, I can work in team and learn from them, social factor matters aswell as ensurance and diversity. I also want my total income (freelance + part-time job + own startup maybe)to be not too much less than one I have working in EE development sector. Maximum of 25% lower, but not more. Is it all possible if I stick with web-development (LAMP + HTML/CSS/JS/Jquery/AJAX)? Or is it easier to reach my goals with EE development?

  Read the article

• Should we persist with an employee still writing bad code after many years?

  - by user94986

  I've been assigned the task of managing developers for a well-established company. They have a single developer who specialises in all their C++ coding (since forever), but the quality of the work is abysmal. Code reviews and testing have revealed many problems, one of the worst being memory leaks. The developer has never tested his code for leaks, and I discovered that the applications could leak many MBs with only a minute of use. User's were reporting huge slowdowns, and his take was, "it's nothing to do with me - if they quit and restart, it's all good again." I've given him tools to detect and trace the leaks, and sat down with him for many hours to demonstrate how the tools are used, where the problems occur, and what to do to fix them. We're 6 months down the track, and I assigned him to write a new module. I reviewed it before it was integrated into our larger code base, and was dismayed to discover the same bad coding as before. The part that I find incomprehensible is that some of the coding is worse than amateurish. For example, he wanted a class (Foo) that could populate an object of another class (Bar). He decided that Foo would hold a reference to Bar, e.g.: class Foo { public: Foo(Bar& bar) : m_bar(bar) {} private: Bar& m_bar; }; But (for other reasons) he also needed a default constructor for Foo and, rather than question his initial design, he wrote this gem: Foo::Foo() : m_bar(*(new Bar)) {} So every time the default constructor is called, a Bar is leaked. To make matters worse, Foo allocates memory from the heap for 2 other objects, but he didn't write a destructor or copy constructor. So every allocation of Foo actually leaks 3 different objects, and you can imagine what happened when a Foo was copied. And - it only gets better - he repeated the same pattern on three other classes, so it isn't a one-off slip. The whole concept is wrong on so many levels. I would feel more understanding if this came from a total novice. But this guy has been doing this for many years and has had very focussed training and advice over the past few months. I realise he has been working without mentoring or peer reviews most of that time, but I'm beginning to feel he can't change. So my question is, would you persist with someone who is writing such obviously bad code?

  Read the article

• Good bug tracking with Sharepoint?

  - by torbengb

  At my place of work, it has been decided to move many processes to Sharepoint. I'm now looking into how Sharepoint can be used for bug tracking (à la Mantis, FogBugz etc. but within Sharepoint). Specifically, we're using a collaboration room and the solution must work inside that. I know that I can create lists using an "Issue tracker" template, but it lacks workflow, integrated correspondence (like FogBugz), and audit log (any user can edit any field any time, without it being noted anywhere). That's not sufficient, so I am looking for "bigger" solutions but haven't yet found anything at all. This question is similar but aims at Helpdesk use; we aim at bug tracking and change requests to a system. I'm open to suggestions! As I'm not an administrator, I can't just grab a Sharepoint component and install it for testing. I'm looking for experiences, documentation, white papers, screen shots -- the actual downloadable will be relevant later. Ideally, some of these matters should be covered: Support for different ticket types (bug, feature, inquiry, internal task). Configurable workflow per ticket type, no fixed number of steps. Configurable read/write permissions per field and per workflow status. Configurable dashboard for managers with nice charts. Configurable email notifications. Correspondence à la FogBugz. (Challenge: we use Notes, not Exchange.)

  Read the article

• Kernel panic while loading Mac OS X on VMWare

  - by Vladimir Gritsenko

  I have Mac OS X 10.6.3 and VMWare 7.1. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

  Read the article

• Noob Objective-C/C++ - Linker Problem/Method Signature Problem

  - by Josh

  There is a static class Pipe, defined in C++ header that I'm including. The static method I'm interested in calling (from Objetive-c) is here: static ERC SendUserGet(const UserId &_idUser,const GUID &_idStyle,const ZoneId &_idZone,const char *_pszMsg); I have access to an objetive-c data structure that appears to store a copy of userID, and zoneID -- it looks like: @interface DataBlock : NSObject { GUID userID; GUID zoneID; } Looked up the GUID def, and its a struct with a bunch of overloaded operators for equality. UserId and ZoneId from the first function signature are #typedef GUID Now when I try to call the method, no matter how I cast it (const UserId), (UserId), etc, I get the following linker error: Ld build/Debug/Seeker.app/Contents/MacOS/Seeker normal i386 cd /Users/josh/Development/project/Mac/Seeker setenv MACOSX_DEPLOYMENT_TARGET 10.5 /Developer/usr/bin/g++-4.2 -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk -L/Users/josh/Development/TS/Mac/Seeker/build/Debug -L/Users/josh/Development/TS/Mac/Seeker/../../../debug -L/Developer/Platforms/iPhoneOS.platform/Developer/usr/lib/gcc/i686-apple-darwin10/4.2.1 -F/Users/josh/Development/TS/Mac/Seeker/build/Debug -filelist /Users/josh/Development/TS/Mac/Seeker/build/Seeker.build/Debug/Seeker.build/Objects-normal/i386/Seeker.LinkFileList -mmacosx-version-min=10.5 -framework Cocoa -framework WebKit -lSAPI -lSPL -o /Users/josh/Development/TS/Mac/Seeker/build/Debug/Seeker.app/Contents/MacOS/Seeker Undefined symbols: "SocPipe::SendUserGet(_GUID const&, _GUID const&, _GUID const&, char const*)", referenced from: -[PeoplePaneController clickGet:] in PeoplePaneController.o ld: symbol(s) not found collect2: ld returned 1 exit status Is this a type/function signature error, or truly some sort of linker error? I have the headers where all these types and static classes are defined #imported -- I tried #include too, just in case, since I'm already stumbling :P Forgive me, I come from a web tech background, so this c-style memory management and immutability stuff is super hazy. Edit: Added full linker error text. Changed "function" to "method" Thanks, Josh

  Read the article

• Building Dynamic Classes in Objective C

  - by kjell_

  I'm a somewhat competent ruby programmer. Yesterday I decided to finally try my hand with Apple's Cocoa frameworks. Help me see things the ObjC way? I'm trying to get my head around objc_allocateClassPair and objc_registerClassPair. My goal is to dynamically generate a few classes and then be able to use them as I would any other class. Does this work in Obj C? Having allocated and registered class A, I get a compile error when calling [[A alloc] init]; (it says 'A' Undeclared). I can only instantiate A using runtime's objc_getClass method. Is there any way to tell the compiler about A and pass it messages like I would NSString? A compiler flag or something? I have 10 or so other classes (B, C, …), all with the same superclass. I want to message them directly in code ([A classMethod], [B classMethod], …) without needing objc_getClass. Am I trying to be too dynamic here or just botching my implementation? It looks something like this… NSString *name = @"test"; Class newClass = objc_allocateClassPair([NSString class], [name UTF8String], 0); objc_registerClassPair(newClass); id a = [[objc_getClass("A") alloc] init]; NSLog(@"new class: %@ superclass: %@", a, [a superclass]); //[[A alloc] init]; blows up.

  Read the article

• gen-msg.map missing in Snort rules?

  - by TheLQ

  I am trying to install Snort 2.8.4.1 (only package available in the repos) with Barnyard2 with limited success. I've managed to fix everything but this: [lordquackstar@quackwall rules]$ sudo barnyard2 -c /etc/snort/barnyard2.conf -d /var/log/snort -f snort.u2 -w /etc/snort/barny Password: Running in Continuous mode --== Initializing Barnyard2 ==-- Initializing Input Plugins! Initializing Output Plugins! Parsing config file "/etc/snort/barnyard2.conf" ERROR: Unable to open Generator file "/etc/snort/gen-msg.map": No such file or directory ERROR: Stat check on log dir (/var/log/barnyard2) failed: No such file or directory. Fatal Error, Quitting.. The gen-msg.map error is puzzling me. The rulesets that come with the package do not contain this file. The newish rules I just downloaded from Snort.org for version 2.8.6.1 don't have this file. The only file that looks close is called sid-msg.map, but that's the wrong one. Where can I obtain this file? Just in case it matters: The packages come from the ClearOS repositories (OS is based off of CentOS). I'm running CentOS 5.2

  Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >