Search Results

Search found 4848 results on 194 pages for 'cocoa matters'.

Page 177/194 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

• SSD as primary or secondary drive on a small Linux server?

  - by Alex Martelli

  I'm pensioning off my 10-years-old home server and replacing it with an Ubuntu 10.04 box. The two storage devices are a Western Digital Caviar Green 2.0TB HD and an Intel X25-M 34nm Gen 2 80GB SATA II 2.5inch SSD (the box has 8GB RAM and an i5 750, if it matters). I don't care much about boot times (since I don't plan to reboot all that often;-); the main frequent, performance-demanding task will be (re)building large open source C or C++ software packages from sources (as an open source contributor, I do that often). So, I thought I'd keep the SSD as the secondary drive and the HD as the primary one, using the SSD mostly for the files that can otherwise demand a lot of seeking (esp. in a parallel make). However, the friendly vendor (perhaps more experienced in Windows systems than in Linux ones) thinks the "normal" way to configure the machine would be with the SSD as the primary drive. I'm pretty rusty on configuring and tuning systems, so, I thought I'd better double check on SuperUser... thanks in advance for advice about this choice!

  Read the article

• I have a perl script that is supposed to run indefinitely. It's being killed... how do I determine who or what kills it?

  - by John O

  I run the perl script in screen (I can log in and check debug output). Nothing in the logic of the script should be capable of killing it quite this dead. I'm one of only two people with access to the server, and the other guy swears that it isn't him (and we both have quite a bit of money riding on it continuing to run without a hitch). I have no reason to believe that some hacker has managed to get a shell or anything like that. I have very little reason to suspect the admins of the host operation (bandwidth/cpu-wise, this script is pretty lightweight). Screen continues to run, but at the end of the output of the perl script I see "Killed" and it has dropped back to a prompt. How do I go about testing what is whacking the damn thing? I've checked crontab, nothing in there that would kill random/non-random processes. Nothing in any of the log files gives any hint. It will run from 2 to 8 hours, it would seem (and on my mac at home, it will run well over 24 hours without a problem). The server is running Ubuntu version something or other, I can look that up if it matters.

  Read the article

• Change A Password

  - by Thomas

  I have a non-domain machine that I use with our company's domain resources over vpn regularly. I switched to Windows 8 (fresh install), and the "Change a password" option went away from the Ctrl-Alt-Del window. Can't seem to google anything about this subject, or find a way to access that password change dialog. I tried running the .reg file from http://www.sevenforums.com/tutorials/63014-ctrl-alt-del-screen-add-remove-change-password.html with no luck. I also tried to Disable "Remove Change Password" via gpedit.msc. I could do it from my domain laptop, but I like to do it on this machine because it updates all my saved copies of those credentials. My local account is tied to my hotmail account if that matters. Updates: Administrator account. I apologize for stating this was an upgrade, it was a fresh install to a diff't drive. 64-bit Pro install. Bounty's almost up If someone can just confirm that the Change A Password... should or should not be present on a non-domain, Live tied, Win8 install, I'll be satisfied that I can or cannot expect to fix it.

  Read the article

• Message to distribution list with removed recipient bouncing back when sent from external mail server

  - by jshin47

  I removed a particular user from all distribution groups manually about five days ago. This user was a member of two particular groups that have other recipients. The OAB polling interval is 30 minutes, not that it really matters here. The situation is that I have an SMTP server that is not part of my Exchange organization that sends out automated email reports to these distribution groups. It sends them using a from: address that is a member of our Exchange organization. That member receives a bounce-back email indicating the member that should have been removed from the group does not exist. I have also verified that this is the same behavior when sending an email from a webmail service like GMail or Hotmail (outside of our Exchange organization of course) to either of those distribution group addresses. However when I send an email internally to one of those distribution group addresses everything works as expected (no bounce messages.) Not sure why this would be happening, but also not sure how to go about diagnosing the issue. I've looked at the SMTP headers and there are no relevant clues there as far as I can tell. I think it's an Exchange issue.

  Read the article

• Firefox: Clear History Is SUPER EFFECTIVE?

  - by acidzombie24

  I'm seeing a performance problem on certain sites (like gmail) which clearing the history should not affect. Is this a website problem or a firefox problem and what can i do to fix it w/o clearing my history? Also as a webdeveloper i am interested in how to make this happen (or not happen). I'm using firefox 8 and i confirmed the problem by copying my profile to firefox 11 (portable). To reproduce go to gmail.com and sign in. Have your task manager open. Once you click signin or hit enter gmail will bring up your emails. Keep your eye on the CPU usage. I checked and right now on this machine its using all my CPU for 22seconds!!!! Yes. 22 seconds. Once i cleared my "browser & download history" Its <6seconds. WTF. I have no idea why or how the size of history and CPU usage when loading up gmail are correlated. I have firefox setup so it never clears the history. But... 22seconds is a disaster. Can someone explain why this is happening or a fix that isnt clearing my history? I tried visiting a few websites and only gmail eats up that much CPU. Most websites only take <5sec of max CPU. So maybe this is a gmail problem? Or a firefox problem that gmail happens to hit? I still dont understand why it happens. -edit- I forgot to mention places.sqlite is 90mb. I dont think that matters. I have a sqlite file 400mb which is pretty much 2 large tables. It has no performance issues

  Read the article

• Trouble Letting Users Get to Certain Sites through Squid Proxy

  - by armani

  We have Squid running on a RHEL server. We want to block users from getting to Facebook, other than a couple specific sites, like our organization's page. Unfortunately, I can't get those specific pages unblocked without allowing ALL of Facebook through. [squid.conf] # Local users: acl local_c src 192.168.0.0/16 # HTTP & HTTPS: acl Safe_ports port 80 443 # File containing blocked sites, including Facebook: acl blocked dst_dom_regex "/etc/squid/blocked_content" # Whitelist: acl whitelist url_regex "/etc/squid/whitelist" # I do know that order matters: http_access allow local_c whitelist http_access allow local_c !blocked http_access deny all [blocked_content] .porn_site.com .porn_site_2.com [...] facebook.com [whitelist] facebook.com/pages/Our-Organization/2828242522 facebook.com/OurOrganization facebook.com/media/set/ facebook.com/photo.php www.facebook.com/OurOrganization My biggest weakness is regular expressions, so I'm not 100% sure about if this is all correct. If I remove the "!blocked" part of the http_access rule, all of Facebook works. If I remove "facebook.com" from the blocked_content file, all of Facebook works. Right now, visiting facebook.com/OurOrganization gives a "The website declined to show this webpage / HTTP 403" error in Internet Explorer, and "Error 111 (net::ERR_TUNNEL_CONNECTION_FAILED): Unknown error" in Chrome. WhereGoes.com tells me the URL redirects for that URL goes like this: facebook.com/OurOrganization -- [301 Redirect] -- http://www.facebook.com/OurOrganization -- [302 Redirect] -- https://www.facebook.com/OurOrganization I tried turning up the debug traffic out of squid using "debug_options ALL,6" but I can't narrow anything down in /var/log/access.log and /var/log/cache.log. I know to issue "squid -k reconfigure" whenever I make changes to any files.

  Read the article

• MongoDB and GrifFS. What are the best storage options in the range of 1 TB?

  - by Nerian

  We are going to launch a service that will require between 1 and 2 GB for file storage per paid user. I am going to use GridFS for storing files. I am pondering the different options for storing the database. But since I am unexperienced at deployment and it is my first time with Mongodb I need your experience. Criteria: I want to spend my time developing my core business, that is, my own application. I am a Ruby on Rails developer. I do not like to mess with server configuration. Hence, I would like a fully managed hosting solution. But I would like to know about any other option, if you think it is worth it. It should be able to scale. Cloud style. Pay as you go. The lower the price, the better. So far I known of these services: https://mongohq.com/pricing https://mongomachine.com/pricing https://mongolab.com/about/pricing/ http://cloudcontrol.com/add-ons/mongodb/ And they seem to be OK for common needs, that is no file storage. But I am going to use GridFS, so the size matters. These services seems to scale, in price, quite poorly. MongoHQ: The larger plan max storage is 20 GB. Seems like a very little storage, for GridFS. MongoMachine: Flat price, 2.5$ per GB. I didn't found the limit. Seems like a good price, comparing the others. MongoLab: 3.984 GB max, which I don't think I will hit, so perfect. 8$ per GB, quite costly. CloudControl: The larger plan is 20 Gb. The custom service starts at 250€ plus some unspecified charge per GB. What is your experience with these services? Any downtimes? Other possibilities?

  Read the article

• What are the best tricks for learning how to -think- in Objective-C?

  - by Braintapper

  Before I get flamed out for not checking previous questions, I have read most of the tutorials, and have Hillegass' book, as well as O'Reilly's book on it. I'm not asking for tips on Cocoa or what IDE to use. Where my issue lies - my 'mental muscle memory' is making it hard for me to read Objective-C code. I have no problems at all reading Java and C code and understanding what's going on. Maybe I'm getting to old to learn a new syntax, but it's a struggle shifting mental gears and looking at Objective-C code and just "getting it" (I thought it might be an isolated case, but I have other friends who are seasoned devs who have said the same thing). Are there any tricks that any non-Objective-C programmers who now know Objective-C used to help process the syntactical differences when learning it? For some reason, I get dyslexic when reading Objective-C code. Maybe I'm not meant to be able to learn it (and that's ok too). I was hoping/wondering if there might be others who have had the same experience.

  Read the article

• Cant ping ip on LAN. Port forward works fine though.

  - by Anoop

  I have a Solaris 11 machine running inside the LAN. It is a default install. I can access the machine and ping it if I ssh into my router (if it matters, it is running dd-wrt). I cannot ping the Solaris machine using ip address from any other machine inside the LAN. But if I setup port forwarding everything works perfectly fine. I can also use the port forward from outside the LAN (from my office) - which is good and how I want it to be. I can SSH and ping and do pretty much everything else from outside as well as inside but only as long as I have the port forwarded from my router. Why would I not be able to ping or ssh or even access the Solaris 11 machine from within the LAN - I have checked and couldn't find any firewall running on the Solaris 11 box. I even tried disabling every known firewall on the router (dd-wrt, it had something like SPI firewall running). I even tried setting a static IP for my Solaris box but all in vain! Please help me understand how and why this happens!! Thanks.

  Read the article

• I have bought a custom domain and am using it with Gmail. All My mail is being sent as spam. What can I do?

  - by Leonnears

  A while ago, I purchased my own custom domains for my websites. Before I moved them to Gmail, I just created the e-mails in my CPanel at Bluehost.com and worked from there. When the setup was like that, I could send and receive e-mail fine, and it wouldn't be marked as spam. Now I have moved these custom domains to send and receive e-mails at Gmail using Google apps. I have done everything. I have marked the domains as "Authorized" and I believe that should be enough for the mail I send with these custom e-mails is not send as spam. If it matters, I have configured my iPhone to use these custom domains with it and I'm sending all the e-mail from it. What can I do? I started doing all this today but apparently the DNS changes have already taken place. Is there something I have to do, or is it a matter of waiting 48 hours for my mail to not be marked as spam by other providers yet? EDIT: If I send mail via Gmail itself, the mail is delivered fine. If I use my iPhone however, it gets marked as spam.

  Read the article

• Programming texts and reference material for my Kindle DX, creating the ultimate reference device?

  - by mwilliams

  (Revisiting this topic with the release of the Kindle DX) Having owned both generation Kindle readers and now getting a Kindle DX; I'm very excited for true PDF handling on an e-ink device! An image of _Why's book on my Kindle (from my iPhone). This gives me a device capable of storing hundreds of thousands of pages that are full text search capable in the form factor of a magazine. What references (preferably PDF to preserve things such as code samples) would you recommend? Ultimately I would like reference material for every modern and applicable programming language (C, C++, Objective-C, Python, Ruby, Java, .NET (C#, Visual Basic, ASP.NET), Erlang, SQL references) as well as general programming texts and frameworks (algorithms, design patterns, theory, Rails, Django, Cocoa, ORMs, etc) and anything else that could be thought of. With so many developers here using such a wide array of languages, as a professional in your particular field, what books or references would you recommend to me for my Kindle? Creative Commons material a plus (translate that to free) as well as the material being in the PDF file format. File size is not an issue. If this turns out to be a success, I will update with a follow-up with a compiled list generated from all of the answers. Thanks for the assistance and contributing! UPDATE I have been using the Kindle DX a lot now for technical books. Check out this blog post I did for high resolution photos of different material: http://www.matthewdavidwilliams.com/2009/06/12/technical-document-pdfs-on-the-kindle-dx/

  Read the article

• IP Masquerade and forwarding

  - by poelinca

  Hi all , i got a dedicated server running ubuntu server 10.10 with 3 ip adresses on the same eth card ( example: eth0 192.168.0.1 , eth0:0 188.78.45.0 , eth0:1 ... ) with a 3 virtual machines running ( virtualization technologi used is lxc but i don't think this matters too much ) . Now i need to redirect all ports opened ( using ufw to close/open ports ) from the ip 188.78.54.0 ( eth0:0 ) to a virtual machine ip ( let's say for example 192.168.2.3 ) , all requests made by a virtual machine should be redirected back to the virtual machine that made the request ( in this example 192.168.2.3 ) . Lets say the second vm has the ip 192.168.2.4 now i need to redirect all opened ports to from eth0:1 to this ip and viceversa . And so on and so on , what are the iptables/ufw rules to get this done ? and where to save them ( witch config file ) so they stay the same after reboot . In a few words redirect all requests comming from/to eth0:0 to a certan ip , all requests comming from/to eth0:1 to another ip ... Remember i'm saying all ports opened becouse they might be dynamicly changed . p.s. please excuse my bad english

  Read the article

• Remote reboot of windows to knoppix

  - by user64452

  I am attempting to develop an Auditing application. This audit application will be employed on windows networks. The Audit will need to discover Hardware and software details of all machines attached to the network (including Printers) I do not want to have to install this application on each workstation. The audit app. needs to discover all the ip addresses of all the networked workstations. I have been prototyping this app for the last couple of months and have decided to try a new tack Is this possible? a). You have a windows network, min Windows XP sp3 and upwards b). Maximum of 100 Networked machines (if that matters) c). I need to remotely reboot each WINDOWS machine in turn on the entire network and get it to startup using UNIX, say knoppix for example! d). however the knoppix live cd is only available from one of the networked machines Questions... Morphology? Longevity? Incept dates? Cheers DD

  Read the article

• Looking for a good C++/.net

  - by Michael Minerva

  I have recently started to feel that I need to greatly improve my C++ skills especially in the realm of .net. I graduated from a good four year university with a degree in computer science about 9 months ago and I have since been doing full time contract work for a small software company in my local area. Most of my work has been done using Java/lisp/cocoa/XML and before that most of my programming in my senior year was in java/C#. I did a decent amount of C++ in my Sophomore year and in my free time before that but I feel that my general knowledge of C++/.net is very lacking for the opportunities that are now coming my way. Can anyone recommend a good book that could help me get up too speed? I feel I do not need a very basic introduction to C++ but something that covers the fundamentals of .net would be good for me. So basically what I need is a book or books that would be good for a .net novice and a C++ developer who is just beyond novice. Also, a book that would help bein an interview by giving me a conversional understanding of C++ would be great. Thanks a lot!.

  Read the article

• Clone a Windows Installation to a 3TB Hard Drive; MBR to GPT

  - by DanBlakemore

  I have Windows 7 Professional 64-bit installed on my desktop. Unfortunately for me and my wallet my hard drive is failing. I have purchased a 3TB hard drive as a replacement for my current 2TB drive. I would like to avoid as much hassle as possible in moving to this new drive so I would like to copy my current partition to the new drive using Gparted. The problem is that I suspect that my current partition is MBR, and I need GPT on my new drive since it is 3TB. Can I simply copy the MBR partition onto the new disk and then convert it to GPT after the fact (can you even convert the type of a partition)? Or would I need to somehow copy the contents of the partition into a GPT partition on the new drive? How do I go about making this transistion? Also, are there any issues I should be wary of booting to a GPT partition? If it matters, my motherboard is 1 year old as of May, 2012. Edit: My motherboard is 1 day old. My old one does not have UEFI compatibility, so I decided to make an upgrade to Intel today given that I would need a UEFI motherboard to use my new HDD. How much can I use a dying hard drive (bad sectors according to Hitachi Drive Fitness Test)? I have assumed not at all, to be safe.

  Read the article

• How do I configure Jetty (via jettyrunner) so that it names a character set in the Content-Type response header?

  - by Pointy

  I use Jetty (via the oh-so-handy Jetty Runner) for day-to-day web application testing. One thing I've recently stumbled on is the fact that I don't get a character set called out in the "Content-Type" response header all the time. I do get it in response to my application's XMLHttpRequest transactions, but not for plain old pages loaded by <a> links or whatever. I've read a little bit about how to set up a Jetty config file, but I've never been able to completely understand that; all servlet containers are complicated, and while Jetty is pretty simple it's just weird enough that I don't grok the overall idea. Thus, all I do to launch my app is to run the Jetty Runner .jar file with a couple of simple arguments to set up the port number and logfile path, and then I just give it the .war file to run. It works great — except for the missing character set :-) Anybody have a quick sample config file that might fix this? edit — oh if it matters, I'm running Jetty 7.0.0 RC3; I've also tried with a slightly newer version (still 7.something) with exactly the same issue. All my testing is on Ubuntu.

  Read the article

• How would I write a terminal command to download a folder with wget from a Media Temple (gs) server?

  - by racl101

  I'm trying to download a folder using wget on the Terminal (I'm usin a Mac if that matters) because my ftp client sucks and keeps timing out. It doesn't stay connected for long. So I was wondering if I could use wget to connect via ftp protocol to the server to download the directory in question. I have searched around in the internet for this and have attempted to write the command but it keeps failing. So assuming the following: ftp username is: [email protected] ftp host is: ftp.s12345.gridserver.com ftp password is: somepassword I have tried to write the command in the following ways: wget -r ftp://[email protected]:[email protected]/path/to/desired/folder/ wget -r ftp://serveradmin:[email protected]/path/to/desired/folder/ When I try the first way I get this error: Bad port number. When I try the second way I get a little further but I get this error: Resolving s12345.gridserver.com... 71.46.226.79 Connecting to s12345.gridserver.com|71.46.226.79|:21... connected. Logging in as serveradmin ... Login incorrect. What could I be doing wrong?

  Read the article

• VirtualName-based local development host behind corporate proxy (MAMP)

  - by geerlingguy

  I am behind a corporate proxy server/firewall, and this firewall seems to not be too happy with my idea of local development. On my home computer (Mac/Leopard), I have MAMP running, with a rule in /etc/hosts that directs dev.example.com to 127.0.0.1, and I have a virtualhost set up in the httpd.conf file which works great for me. However, at work, I set up the exact same configuration, but am not able to access dev.example.com, likely due to some address/DNS translation going on via the proxy server. Here are the relevant details from Terminal: $ ping dev.example.com PING dev.example.com (127.0.0.1): 56 data bytes 64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=0.025 ms $ host dev.example.com Host dev.example.com not found: 3(NXDOMAIN) I've tried adding dev.example.com to the list of bypass addresses in System Preferences (the 'Bypass proxy settings for these Hosts & Domains' list), but that had no effect. Is there any way I can develop locally using name-based hosts at work? I can access localhost, but can't get to the dev.example.com (or any other custom virtualhosts) here at work, which complicates other matters related to the sites on which I'm working...

  Read the article

• Apache /server-status/ gives a 404 not found

  - by user57069

  I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking. first, system info: monitored server CentOS 5.3 kernel 2.6.18-128.1.1.el5 Apache/2.2.3 "server-status" directive in httpd.conf (i've cross-compared this with another system that i did a successful parallel install of Munin on, correctly showing Apache stats, and the directive below is the same for both) ExtendedStatus On <Location /server-status> SetHandler server-status Order deny,allow Deny from all Allow from 127.0.0.1 </Location> ran lynx http://localhost/server-status got HTTP/1.1 404 taking a look at Apache access_log: 127.0.0.1 - - [13/Oct/2010:07:00:47 -0700] "GET /server-status HTTP/1.0" 404 11237 "-" "Lynx/2.8.5rel.1 libwww-FM/2.14 SSL-MM/1.4.1 OpenSSL/0.9.8e-fips-rhel5" mod_status is also loaded: % grep "mod_status" /etc/httpd/conf/httpd.conf LoadModule status_module modules/mod_status.so iptables is turned off also i did notice that the ownership status on httpd.conf on this system is root.root.. whereas the system that is displaying correctly is apache.www -- not certain that this matters?? its got to be permission issue, but i'm not certain where the permissions are messed up. any thoughts on why the test of server-status is giving me a 404?

  Read the article

• How can I create two partitions and clone one to the other (using Clonezilla)?

  - by johnny

  I was hoping someone could help. I want to create a "backup" partition. I want to create two partitions on my drive. One is a good install, which I want to then use clonezilla to copy the good partition to the broken/unused partition and have the restored partition boot up as usual. Example, C: goes bad. D: is a "good" copy of C. C gets a corrupt registry. I restore D to C, C will then boot up as usual. So, I need to do the clone with Clonezilla and the restore with the same. I see the part_...clone and restore. Will this do it? How do I get the partitions? EDIT: I am using XP. How can I do this? Also, I know this is not the best thing for all occasions. I have a offline backup as well. I would like to have both. Thanks for any help. I'm using Clonezilla if it matters.

  Read the article

• VPN with VLANs? [closed]

  - by Craig

  As usual, I'm sure I'm in way over my head on this one. My networking skills are limited; so, bear with me if you will. What I have are a few testing servers at my house as well as at a friends house that I want to link together so they can see each other (VPN right? I've done those before). We want to be able to see all the servers and work with them from either location. All the servers also need to be able to see each other. But, we don't want to see each others PCs, printers, PS3s etc. How do we pull that trick off? Multiple VLAN?... subnets?... what? If hardware matters, I have an old PC I was planning on loading pfSense onto because my current el-cheapo router doesn't support VPN. The VPN linking the houses is about the only thing I'm sure on. Beyond that, I'm lost. I'm not a complete noob; but, like I said, I'm not so sharp with the more complex networking. I do however read well... So use lots of descriptive words and feel free to link away to long dry articles if necessary. :-)

  Read the article

• What steps should I take to secure Tomcat 6.x?

  - by PAS

  I am in the process of setting up an new Tomcat deployment, and want it to be as secure as possible. I have created a 'jakarta' user and have jsvc running Tomcat as a daemon. Any tips on directory permissions and such to limit access to Tomcat's files? I know I will need to remove the default webapps - docs, examples, etc... are there any best practices I should be using here? What about all the config XML files? Any tips there? Is it worth enabling the Security manager so that webapps run in a sandbox? Has anyone had experience setting this up? I have seen examples of people running two instances of Tomcat behind Apache. It seems this can be done using mod_jk or with mod_proxy... any pros/cons of either? Is it worth the trouble? In case it matters, the OS is Debian lenny. I am not using apt-get because lenny only offers tomcat 5.5 and we require 6.x. Thanks!

  Read the article

• Replacing Failing RAID 1 Drive

  - by mrduclaw

  I hope this is a simple question, but I simply don't know anything about RAID. Some time ago I received a machine that, as I understand it, has two drives in it under RAID 1 (or so that one drive is mirrored on the other and appears as just 1 drive to the OS). Recently, one of these drives has started marking a clicking noise and I would like to replace it. I believe the machine has a hardware RAID controller on the motherboard that handles the RAID stuff, but if it matters the Operating System is Windows XP 32-bit. Is the solution to my problem as simple as buying another drive that is of the same capacity and plugging it in where the clicking drive is currently? Or could I possibly lose everything if the drive that's clicking is the one being mirrored on to the other drive? Is there some menu I need to find before unhooking things? Any best practices out there? I'm sure I'm leaving out some required information, so please just tell me what I'm missing. Thanks!

  Read the article

• iptables rules for DNS/Transparent proxy with ip exceptions

  - by SlimSCSI

  I am running a router (A Netgear WNDR3700 if that matters) with dd-wrt. For content filtering I am using OpenDNS. I wanted to make sure a user could not bypass OpenDNS by putting in their own name servers, so I have a rule to catch all DNS traffic. iptables -t nat -A PREROUTING -i br0 -p all --dport 53 -j DNAT --to $LAN_IP I did have one computer on the network I wanted to allow past OpenDNS filters. On that machine I manually set the name servers, and created another rule to allow it to pass iptables -t nat -I PREROUTING -i br0 -s 192.168.1.2 -j ACCEPT This worked well. Today, I installed a transparent proxy (squid) on the router and added these rules: iptables -t nat -A PREROUTING -i br0 -s $LAN_NET -d $LAN_NET -p tcp --dport 80 -j ACCEPT iptables -t nat -A PREROUTING -i br0 -s ! $PROXY_IP -p tcp --dport 80 -j DNAT --to $PROXY_IP:$PROXY_PORT iptables -t nat -I POSTROUTING -o br0 -s $LAN_NET -d $PROXY_IP -p tcp -j SNAT --to $LAN_IP iptables -I FORWARD -i br0 -o br0 -s $LAN_NET -d $PROXY_IP -p tcp --dport $PROXY_PORT -j ACCEPT This also works, however the 192.168.1.2 address does not get routed through squid. How can I have 192.168.1.2 (and maybe others in the future) by-pass the port 53 rules, but not the port 80 rules?

  Read the article

• How can I change the default program installation directory in Windows 7?

  - by Max

  Windows 7 is installed on my C drive, which is quite small. I am very tired of instructing new programs to put their files on my larger D drive during installation; I would like to change the default drive. This article says that you can use a registry hack, but I am giving Microsoft the benefit of the doubt and naively assuming that a configuration option exists somewhere. It's 2010... do I really have to hack my registry to make a simple tweak like this? Also, there's a ServerFault question that explains how to move the "Users" directory and create a symlink, which could also work. However, at the moment I have some apps in C:\Program Files, some apps in C:\Program Files (x86), and some apps in the corresponding folders on D:\, so it would be a hassle. Also, my small OS boot drive is a 10k RPM WD Raptor, and I feel like that probably gives a speed boost to apps installed on it that need to read & write to their directories a bunch. I wonder if it actually matters.

  Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >