Search Results

Search found 14821 results on 593 pages for 'device driver'.

Page 171/593 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

• Is there a way to disable the hardware on/off switch for the Wireless interface?

  - by avee

  I have an HP 520 and is running the latest Ubuntu 11.10. The hardware works fine with Ubuntu with one exception: The device has a hardware switch for turning the wifi on and off. Every time the wi-fi is disabled through the hardware switch, I am unable to bring it on again. The message on the networking popup would be device not ready. What I am looking for is a way to disable the hardware switch altogether so that when users accidentally press the button, the wifi would not be disabled. There is no setting to disable the switch in the BIOS. Hardware info from lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) 02:06.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01) 02:08.0 Ethernet controller [0200]: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile [8086:1068] (rev 01) 10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) The output from lsmod | grep iwl: iwl3945 73329 0 iwl_legacy 71499 1 iwl3945 mac80211 272785 2 iwl3945,iwl_legacy cfg80211 172392 3 iwl3945,iwl_legacy,mac80211

  Read the article

• SD-CARD reader does not show in ubuntu

  - by shantanu

  I bought Acer asipre 4250. It have built-in SD card reader. But it is not working. Nothing show in /media or fdisk but something in dmesg. dmesg: new high-speed USB device number 3 using ehci_hcd [ 127.396733] scsi5 : usb-storage 2-2:1.0 [ 128.526562] scsi 5:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 128.532512] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 129.008110] ohci_hcd 0000:00:12.0: PCI INT A disabled [ 129.032083] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 129.056411] ohci_hcd 0000:00:16.0: PCI INT A disabled [ 129.338026] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 129.808328] ohci_hcd 0000:00:14.5: PCI INT C disabled [ 167.728616] usb 2-2: USB disconnect, device number 3 [ 169.872284] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 169.872340] ehci_hcd 0000:00:13.2: PME# enabled fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0006bc6d Device Boot Start End Blocks Id System /dev/sda1 * 2048 48828415 24413184 7 HPFS/NTFS/exFAT /dev/sda2 48828416 50829311 1000448 82 Linux swap / Solaris /dev/sda3 50829312 99657727 24414208 83 Linux /dev/sda4 99659774 625141759 262740993 5 Extended Partition 4 does not start on physical sector boundary. /dev/sda5 99659776 275439615 87889920 7 HPFS/NTFS/exFAT /dev/sda6 275441664 451221503 87889920 7 HPFS/NTFS/exFAT /dev/sda7 451223552 625141759 86959104 7 HPFS/NTFS/exFAT I found another problem just right now. I format last three drives as EXT4 with disk utility. But they are showing as NTFS/exFAT in fdisk. :-(

  Read the article

• Bluetooth adapter turned from working fine to unrecognized

  - by easoncxz

  i had been using bluetooth fine, with devices working, but today when i turned on my computer again bluetooth strangely failed. there is a bluetooth icon on the top bar, showing "bluetooth on", but if i click on the "bluetooth settings" item, a system settings window shows up and shows me a bluetooth on-off switch which is disabled (i.e. fixed to off). more information about my case: i am a new linux used, coming from windows, and do not know supposedly-obvious commands. i am using a laptop. it initially doesn't have bluetooth. i bought a built-in type (instead of USB type) bluetooth module, and added it inside the laptop. hence, i do not have a specific FN+* key for bluetooth. in windows, i needed to install an additional driver that was intended for other machines in my laptop's seires which have built-in (i.e. factoryly built-in)j bluetooth modules. the Fn+* key seemed to only affect wifi under ubuntu. i have been successfully using magicmouse with my later-added built-in bluetooth module/adapter on both windows and ubuntu i have been trying to tweak the magicmouse scrolling speed with commands rmmod something, modprobe hid_magicmouse --scroll_speed=45 --scroll_acceleration=30 or something, then added a file `/etc/modprobe.d/magicmouse.conf". the mouse seemed to be working fine with these changes. now if i run commands like hcitool dev, the shell tells me that i do not have any "Devices" or "adapters". i seem to have bluez installed, because when i type "blue" then tab-autocomplete, a bunch of commands like bluez-test-device pops up. -- update -- some commands and their results: easoncxz@eason-Aspire-4741-ubuntu:/etc$ hcitool dev Devices: easoncxz@eason-Aspire-4741-ubuntu:/etc$ hcitool scan Device is not available: No such device easoncxz@eason-Aspire-4741-ubuntu:/etc$ rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: no Hard blocked: no easoncxz@eason-Aspire-4741-ubuntu:/etc$ rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no

  Read the article

• How to visualize timer functionality in sequence diagram?

  - by truthseeker

  I am developing software for communication with external device through serial port. To better understand the new functionality I am trying to display it in sequence diagram. Flow of events is as follows. I send to the device command to reset it. This is asynchronous operation so there is some delay between request and response (typically 100 ms). There can be case when the answer never comes (for example device is not connected to the specified port or is currently turned off). For this purpose I create a timer with period twice the maximum answer time. In my case it is 2 * 125 ms = 250 ms. If the answer comes in predefined time interval, I destroy already running timer. If the answer doesnt come in predefined interval, timer initiates some action. After this action we can destroy it. How to effectively model this situation in sequence diagram? Addendum 1: Based on advices made by scarfridge i drew following UML diagram. Comment by Ozair is also helpful for simplifying the diagram even more.

  Read the article

• No WIFI or LAN on Ubuntu 12.04 or 12.10 Live CD/USB using Toshiba qosmio x870

  - by Mighty

  I recently had issues with secure boot and couldn't boot the Live CD/USB but after disabling secure boot, I was able to 'TRY UBUNTU'. My currently problem is that I can't access WIFI or LAN from either Ubuntu 12.04 or 12.10 Live CD/USB which I do from Windows 8. Also, the wireless button is able to turn on and off the wireless LED but doesn't find available WIFI. Please, what should I do to get both WIFI and LAN working on Ubuntu using Toshiba qosmio x870? UPDATED: Here's the output of lspci: ubuntu@ubuntu:~$ lspci 00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev a1) 07:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10) 08:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8723 09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)

  Read the article

• Using orientation to calculate position on Windows Phone 7

  - by Lavinski

  I'm using the motion API and I'm trying to figure out a control scheme for the game I'm currently developing. What I'm trying to achive is for a orienation of the device to correlate directly to a position. Such that tilting the phone forward and to the left represents the top left position and back to the right would be the bottom right position. Photos to make it clearer (the red dot would be the calculated position). Forward and Left Back and Right Now for the tricky bit. I also have to make sure that the values take into account left landscape and right landscape device orientations (portrait is the default so no calculations would be needed for it). Has anyone done anything like this? Notes: I've tried using the yaw, pitch, roll and Quaternion readings. Sample: // Get device facing vector public static Vector3 GetState() { lock (lockable) { var down = Vector3.Forward; var direction = Vector3.Transform(down, state); switch (Orientation) { case Orientation.LandscapeLeft: return Vector3.TransformNormal(direction, Matrix.CreateRotationZ(-rightAngle)); case Orientation.LandscapeRight: return Vector3.TransformNormal(direction, Matrix.CreateRotationZ(rightAngle)); } return direction; } }

  Read the article

• Dell Laptop's Bluetooth isn't detected by Ubuntu

  - by vishwaje

  I have Dell vostro 3500 Laptop. I Installed Ubuntu 12.04. It doesn't detect my bluetooth. below is my information. lsusb | grep Bluetooth Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) lsmod | grep bluetooth bluetooth 158438 10 bnep,rfcomm rfkill list 0: brcmwl-0: Wireless LAN Soft blocked: yes Hard blocked: no 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: no (wifi working fine. I disabled it using network menu. So, it's fine) dmesg | grep Bluetooth [ 21.981835] Bluetooth: Core ver 2.16 [ 21.981872] Bluetooth: HCI device and connection manager initialized [ 21.981877] Bluetooth: HCI socket layer initialized [ 21.981881] Bluetooth: L2CAP socket layer initialized [ 21.981891] Bluetooth: SCO socket layer initialized [ 21.986047] Bluetooth: RFCOMM TTY layer initialized [ 21.986059] Bluetooth: RFCOMM socket layer initialized [ 21.986065] Bluetooth: RFCOMM ver 1.11 [ 22.361783] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.361791] Bluetooth: BNEP filters: protocol multicast So How can I fix this? I saw other place (I don't remember which site) They said, some times, when in windows, if bluetooth disabled by windows driver, It can't be enabled by linux. So, I should install windows and enable blueethooth from windows and then re install linux. That is impossible for me, because I don't have Windows installation media. But I tried this, which is I installed windows xp on virtual box. Vbox showed me thow unknow USB devices. I connected them and installed windows bluethooth drivers to xp. But it didn't ditected Bluethooth either. Also, when I set off mode in hardware switch, those unknown devices disappear from Vbox usb device seletcion menu. So, they are definitely something to do with wifi or bluethooth. Please help me..

  Read the article

• Problem with SANE and CardScan

  - by TiuTalk

  I have a CardScan 60 II device and installed SANE in my Ubuntu 10.10 laptop. The problem is I can't make scanimage find the device. Quote: $ sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x08f0 [Corex Technologies Corporation], product=0x1000 [Corex CardScan 60], chip=LM9832/3) at libusb:006:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. But I can't find the device: $ sudo scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

  Read the article

• Another guvcview issue? Core dump!

  - by user290498

  guvcview is core dumping with my Sony Handycam plugged in. It works fine with my standard Logitech Webcam. I deleted the config file so it could re-create it. here is the output: $ guvcview guvcview 1.5.3 Could not open /home/rayj/.guvcviewrc for read, will try to create it write /home/rayj/.guvcviewrc OK ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 ERROR opening V4L2 interface for /dev/video1 Init. stk1160 (location: usb-0000:00:1d.0-1.5) { pixelformat = 'UYVY', description = '16 bpp YUY2, 4:2:2, packed' } VIDIOC_ENUM_FRAMESIZES - Error enumerating frame sizes: Inappropriate ioctl for device Unable to enumerate frame sizes. : Inappropriate ioctl for device { pixelformat = 'RGB3', description = 'RGB3' } { ?GSPCA? : width = 720, height = 480 } fmtind:2 fsizeind: 1 { pixelformat = 'BGR3', description = 'BGR3' } { ?GSPCA? : width = 720, height = 480 } fmtind:3 fsizeind: 1 { pixelformat = 'YU12', description = 'YU12' } { ?GSPCA? : width = 720, height = 480 } fmtind:4 fsizeind: 1 { pixelformat = 'YV12', description = 'YV12' } { ?GSPCA? : width = 720, height = 480 } fmtind:5 fsizeind: 1 vid:05e1 pid:0408 driver:stk1160 checking format: 1196444237 Format unavailable: 1196444237. Init v4L2 failed !! Init video returned -2 trying minimum setup ... Segmentation fault (core dumped)

  Read the article

• Unable to mount external hard drive - Damaged file system and MFT

  - by Khalifa Abbas Lame

  I get the following error when i try to mount my external hard drive. UNABLE TO MOUNT Error mounting /dev/sdc1 at /media/khalibloo/Khalibloo2: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdc1" "/media/khalibloo/Khalibloo2"' exited with non-zero exit status 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to read of MFT, mft=6 count=1 br=-1: Input/output error Failed to open inode FILE_Bitmap: Input/output error Failed to mount '/dev/sdc1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. It doesn't mount on windows either: "I/O Device error" it's an ntfs hard drive with a single partition Of course, i tried chkdsk /f. it reported several file segments as unreadable, but didn't say whether it fixed them or not (apparently not). also tried with the /b flag. ntfsfix reported the volume as corrupt. TestDisk was able to fix a small error with the partition table by adding the "80" flag for the active (only) partition. TestDisk also confirmed that the boot sector was fine and it matched the backup. However, when attempting to repair the MFT, it couldn't read the MFT. It also couldn't list the files on the hard drive. It says file system may be damaged. Active@ also shows that MFT is missing or corrupt. So how do i fix the file system? or the MFT?

  Read the article

• Error instantiating Texture2D in MonoGame for Windows 8 Metro Apps

  - by JimmyBoh

  I have an game which builds for WindowsGL and Windows8. The WindowsGL works fine, but the Windows8 build throws an error when trying to instantiate a new Texture2D. The Code: var texture = new Texture2D(CurrentGame.SpriteBatch.GraphicsDevice, width, 1); // Error thrown here... texture.setData(FunctionThatReturnsColors()); You can find the rest of the code on Github. The Error: SharpDX.SharpDXException was unhandled by user code HResult=-2147024809 Message=HRESULT: [0x80070057], Module: [Unknown], ApiCode: [Unknown/Unknown], Message: The parameter is incorrect. Source=SharpDX StackTrace: at SharpDX.Result.CheckError() at SharpDX.Direct3D11.Device.CreateTexture2D(Texture2DDescription& descRef, DataBox[] initialDataRef, Texture2D texture2DOut) at SharpDX.Direct3D11.Texture2D..ctor(Device device, Texture2DDescription description) at Microsoft.Xna.Framework.Graphics.Texture2D..ctor(GraphicsDevice graphicsDevice, Int32 width, Int32 height, Boolean mipmap, SurfaceFormat format, Boolean renderTarget) at Microsoft.Xna.Framework.Graphics.Texture2D..ctor(GraphicsDevice graphicsDevice, Int32 width, Int32 height) at BrewmasterEngine.Graphics.Content.Gradient.CreateHorizontal(Int32 width, Color left, Color right) in c:\Projects\Personal\GitHub\BrewmasterEngine\BrewmasterEngine\Graphics\Content\Gradient.cs:line 16 at SampleGame.Menu.Widgets.GradientBackground.UpdateBounds(Object sender, EventArgs args) in c:\Projects\Personal\GitHub\BrewmasterEngine\SampleGame\Menu\Widgets\GradientBackground.cs:line 39 at SampleGame.Menu.Widgets.GradientBackground..ctor(Color start, Color stop, Int32 scrollamount, Single scrollspeed, Boolean horizontal) in c:\Projects\Personal\GitHub\BrewmasterEngine\SampleGame\Menu\Widgets\GradientBackground.cs:line 25 at SampleGame.Scenes.IntroScene.Load(Action done) in c:\Projects\Personal\GitHub\BrewmasterEngine\SampleGame\Scenes\IntroScene.cs:line 23 at BrewmasterEngine.Scenes.Scene.LoadScene(Action`1 callback) in c:\Projects\Personal\GitHub\BrewmasterEngine\BrewmasterEngine\Scenes\Scene.cs:line 89 at BrewmasterEngine.Scenes.SceneManager.Load(String sceneName, Action`1 callback) in c:\Projects\Personal\GitHub\BrewmasterEngine\BrewmasterEngine\Scenes\SceneManager.cs:line 69 at BrewmasterEngine.Scenes.SceneManager.LoadDefaultScene(Action`1 callback) in c:\Projects\Personal\GitHub\BrewmasterEngine\BrewmasterEngine\Scenes\SceneManager.cs:line 83 at BrewmasterEngine.Framework.Game2D.LoadContent() in c:\Projects\Personal\GitHub\BrewmasterEngine\BrewmasterEngine\Framework\Game2D.cs:line 117 at Microsoft.Xna.Framework.Game.Initialize() at BrewmasterEngine.Framework.Game2D.Initialize() in c:\Projects\Personal\GitHub\BrewmasterEngine\BrewmasterEngine\Framework\Game2D.cs:line 105 at Microsoft.Xna.Framework.Game.DoInitialize() at Microsoft.Xna.Framework.Game.Run(GameRunBehavior runBehavior) at Microsoft.Xna.Framework.Game.Run() at Microsoft.Xna.Framework.MetroFrameworkView`1.Run() InnerException: Is this an error that needs to be solved in MonoGame, or is there something that I need to do differently in my engine and game?

  Read the article

• XNA, how to draw two cubes standing in line parallelly?

  - by user3535716

  I just got a problem with drawing two 3D cubes standing in line. In my code, I made a cube class, and in the game1 class, I built two cubes, A on the right side, B on the left side. I also setup an FPS camera in the 3D world. The problem is if I draw cube B first(Blue), and move the camera to the left side to cube B, A(Red) is still standing in front of B, which is apparently wrong. I guess some pics can make much sense. Then, I move the camera to the other side, the situation is like: This is wrong.... From this view, the red cube, A should be behind the blue one, B.... Could somebody give me help please? This is the draw in the Cube class Matrix center = Matrix.CreateTranslation( new Vector3(-0.5f, -0.5f, -0.5f)); Matrix scale = Matrix.CreateScale(0.5f); Matrix translate = Matrix.CreateTranslation(location); effect.World = center * scale * translate; effect.View = camera.View; effect.Projection = camera.Projection; foreach (EffectPass pass in effect.CurrentTechnique.Passes) { pass.Apply(); device.SetVertexBuffer(cubeBuffer); RasterizerState rs = new RasterizerState(); rs.CullMode = CullMode.None; rs.FillMode = FillMode.Solid; device.RasterizerState = rs; device.DrawPrimitives( PrimitiveType.TriangleList, 0, cubeBuffer.VertexCount / 3); } This is the Draw method in game1 A.Draw(camera, effect); B.Draw(camera, effect); **

  Read the article

• Ubuntu installer does not show drives

  - by Tanweer Rashid

  I am trying to install Ubuntu 12.04 LTS on my Inspiron laptio, but the installer does not show any drives. My system has a 1TB SATA drive and a 32GB SSD. As far as I can figure, the boot files are kept on the SSD for fast startup (for Windows). During Win7 installation, I had to manually load drivers for RAID controller to see all available drives. Running fdisk -l from the live CD shows the following: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x234b4782 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 81920 41627647 20772864 7 HPFS/NTFS/exFAT /dev/sda3 41627648 357019647 157696000 7 HPFS/NTFS/exFAT /dev/sda4 357019648 1953517567 798248960 f W95 Ext'd (LBA) /dev/sda5 672415744 1312966655 320275456 7 HPFS/NTFS/exFAT /dev/sda6 1312968704 1953517567 320274432 7 HPFS/NTFS/exFAT Disk /dev/sdb: 32.0 GB, 32017047552 bytes 255 heads, 63 sectors/track, 3892 cylinders, total 62533296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x234b474b Device Boot Start End Blocks Id System /dev/sdb1 2048 16775167 8386560 84 OS/2 hidden C: drive ubuntu@ubuntu:~$ In the Ubuntu installer, I can only choose /dev/sdb for "Device for boot loader installation", and sdb doesn't show any drives. I cannot select /dev/sda. Any ideas anyone? Thanks.

  Read the article

• Oracle Java Embedded Client 1.1 Released

  - by Roger Brinkley

  Yesterday an update release of Oracle Java Embedded Client (OJEC) 1.1 quietly slipped out door for general availability. Until last year it was pretty difficult to get your hands on either a Connected Limited Device Configuration (CLDC) for small devices or a Connected Device Configuration (CDC) for medium devices java implementation without a substantial initial commitment. But with the the release of OJWC (CLDC) and OJEC (CDC) last year that has changed. OJEC 1.1 is a binary distribution designed for installation on medium configurations which is a mid range processor requiring a  slow startup time, seamless upgrades, in a cost sensitive hardware environment  anywhere from 3.5mb to 8 mb. There are headless as well as headed versions available. It is intended for devices, such as Blu-­-ray Disc players, set-­-top boxes, residential gateways,VOIP phones, and similar. From a software point of view, OJEC is the Java runtime platform implementation of Connected Device Configuration (CDC v1.1, JSR-­-218), Foundation Profile (FP v1.1, JSR-­-219), and Personal Basis Profile (PBP v1.1, JSR-­-217)  and includes optional packages RMI (JSR 66), JDBC (JSR 169) and XML API for Java ME (JSR 280), and Java TV (JSR-­-927). New to this release is support for the XML API (JSR 280) and a number of bug fixes and performance enhancements, including an improved Just-in-Time (JIT) compilation for the x86 chipset architecture. The platforms supported include ArmV5, ArmV6/ArmV7, MIPS 32 74K, and X86 in headless mode. For embedded developers there are number of advantages to using Java and if you have shied away from the JavaME edition in the past I would encourage you to look into the updated version of OJEC 1.1.

  Read the article

• Wifi - wireless network not working after installing Ubuntu 12.04

  - by Nilesh

  I had installed ubuntu 12.04 in my Dell Vostro 3460. Initially wired as well wireless both are not working. After installing compat-wireless-2012-07-03-pc.tar.bz2 wired network fine but wireless is not working. Previously both were working fine with ubuntu 11.10. Also presently both network are working fine in Win7. lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10) iwconfig: lo no wireless extensions. eth0 no wireless extensions. ifconfig: eth0 Link encap:Ethernet HWaddr 84:8f:69:d4:35:9b inet addr:10.24.22.72 Bcast:10.24.31.255 Mask:255.255.224.0 inet6 addr: fe80::868f:69ff:fed4:359b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15332 errors:0 dropped:0 overruns:0 frame:0 TX packets:10425 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:9262594 (9.2 MB) TX bytes:1572030 (1.5 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1432 errors:0 dropped:0 overruns:0 frame:0 TX packets:1432 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:145656 (145.6 KB) TX bytes:145656 (145.6 KB)

  Read the article

• grub workaround for cannot find UUID in dual boot system fails and now grub won't boot anything

  - by keepitsimpleengineer

  New clean install of x86 11.10 desktop. Dual boot with windows XP and Linux on separate drives. After install grub will not boot Windows, but by changing boot drive boots fine. When I go to fix this I find from http://bootinfoscript.sourceforge.net/ and a link to http://sourceforge.net/apps/mediawiki/bootinfoscript/index.php?title=Boot_Problems:search my problem, the message on the grub boot error screen: error: no such device: 6??????? So I follow the Step2 and compare the output of: sudo blkid and sudo nano /boot/grub/grub.cfg The UUIDs in both match for the Windows drive, so I do the fix in Step 4 "remove the search lines for …" in /usr/lib/grub/grub-mkconfig_lib, commenting out the three lines as before? # if fs_uuid="`${grub_probe} --device ${device} --target=fs_uuid 2> /dev/null`" ; then # echo "search --no-floppy --fs-uuid --set ${fs_uuid}" # fi I run sudo update-grub and check /etc/default/grub.cfg and see that it now identifies the Windows partition not by UUID, which I suppose is the workaround. But now when I try to boot 11.10 Desktop, I get: error: no such partition… … and when I try to boot Windows, I get: error: invalid signature. So Now, how do I fix this… The boot problem and find a workaround that works?

  Read the article

• Webcam doesn't work in Ubuntu 12.10

  - by Kzhi

  I have Gembird cam68ut. On my Ubuntu 12.10 it shows black screen in cheese and guvcview. I tested it in win7, it works fine. Here what I found: It is a uvc compliant camera, I checked on the site: 18ec:3299 USB 2.0 PC Camera (model number QC3231) ArkMicro This webcam is report by lsusb: Bus 001 Device 004: ID 18ec:3299 Arkmicro Technologies Inc. Here is the output of dmesg | tail: uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (18ec:3299) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. input: USB2.0 PC CAMERA as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input17 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) When I run cheese (or guvcview), here what I get in terminal: libv4l2: error turning on stream: No space left on device (cheese:11797): cheese-WARNING **: Internal data flow error. I tried it on different usb slots with the same results The Webcam's microphone works, I can record audio with it Guys, any thoughts on what can be done to make it work?

  Read the article

• System speakers not recognized

  - by Kyle Maxwell

  Since upgrading to Xubuntu 13.10, sound has not functioned properly (e.g. screeching when playing Skype notifications). Now, however, it does not function at all. pavucontrol only shows Dummy Output and does not recognize the built-in speakers on my Dell Precision M4600. Possibly related, the sound indicator applet does not come up when I click on it, only showing a small white bar underneath it. I have purged and reinstalled pulseaudio. lspci -v shows: 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) Subsystem: Dell Precision M4600 Flags: bus master, fast devsel, latency 0, IRQ 56 Memory at f2560000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 14a3 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0080000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel The "Capabilities: <access denied" line makes me wonder if there's a permissions issue, as the Log Out applet now shows "Restart" and "Shutdown" grayed out. groups shows me in: kmaxwell adm dialout cdrom sudo dip plugdev fuse lpadmin netdev sambashare vboxusers

  Read the article

• Is it unethical to sell the award of a competition? [closed]

  - by Ahmet Yildirim

  This summer, i won a competition held by microsoft & nokia... Winners from each uni. received an high-end smartphone... Knowing that particular "high-end smartphone" had not much user to develop for, as soon as i receive it, i put an ad on a ebay-like site to sell it. Eventually i exchanged it with a tablet which had high developer demand & many many users to develop for , so i could make money by developing for it. I also email microsoft asking, when something technical goes wrong with the device , can i get it fixed by warranty. Which i never received a respond. Later on, after a while... I got some feedback from a connection i have from nokia, regarding sale of the device & asking for the warranty.. He says and i quote : " They say, they werent happy that you sold the device and got offended that you asked for warranty. You should not expect anything at all from microsoft or nokia in the future. " I was like what the frak, they didnt gave it to me as a gift, i won it in a competition as an award , it is my right to do whatever i want. How ethical is that , they dont respond to my email directly? Is it unethical to sell a gadget you won in a competition? Is it unethical to ask for warranty on award?

  Read the article

• Unable to mount NTFS Partition after resizing

  - by sam

  I was having only 15 GB space allocated to LINUX. I wanted to have more space available to linux. So I just re sized one of my ntfs partition using GParted. But after resizing I am not able to open the partition neither in Ubuntu nor in windows. OS: Dual Boot Win7/Ubuntu 10.10 The error message i get is the following: Error mounting: mount exited with exit code 12: Failed to read last sector (395458824): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sda5': Invalid argument The device '/dev/sda5' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

  Read the article

• What is bondib1 used for on SPARC SuperCluster with InfiniBand, Solaris 11 networking & Oracle RAC?

  - by user12620111

  A co-worker asked the following question about a SPARC SuperCluster InfiniBand network: > on the database nodes the RAC nodes communicate over the cluster_interconnect. This is the > 192.168.10.0 network on bondib0. (according to ./crs/install/crsconfig_params NETWORKS> setting) > What is bondib1 used for? Is it a HA counterpart in case bondib0 dies? This is my response: Summary: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic. Details: bondib0 is the cluster_interconnect $ oifcfg getif            bondeth0  10.129.184.0  global  public bondib0  192.168.10.0  global  cluster_interconnect ipmpapp0  192.168.30.0  global  public bondib0 and bondib1 are on 192.168.10.1 and 192.168.10.2 respectively. # ipadm show-addr | grep bondi bondib0/v4static  static   ok           192.168.10.1/24 bondib1/v4static  static   ok           192.168.10.2/24 Hostnames tied to the IPs are node1-priv1 and node1-priv2  # grep 192.168.10 /etc/hosts 192.168.10.1    node1-priv1.us.oracle.com   node1-priv1 192.168.10.2    node1-priv2.us.oracle.com   node1-priv2 For the 4 node RAC interconnect: Each node has 2 private IP address on the 192.168.10.0 network. Each IP address has an active InfiniBand link and a failover InfiniBand link. Thus, the 4 node RAC interconnect is using a total of 8 IP addresses and 16 InfiniBand links. bondib1 isn't being used for the Virtual IP (VIP): $ srvctl config vip -n node1 VIP exists: /node1-ib-vip/192.168.30.25/192.168.30.0/255.255.255.0/ipmpapp0, hosting node node1 VIP exists: /node1-vip/10.55.184.15/10.55.184.0/255.255.255.0/bondeth0, hosting node node1 bondib1 is on bondib1_0 and fails over to bondib1_1: # ipmpstat -g GROUP       GROUPNAME   STATE     FDT       INTERFACES ipmpapp0    ipmpapp0    ok        --        ipmpapp_0 (ipmpapp_1) bondeth0    bondeth0    degraded  --        net2 [net5] bondib1     bondib1     ok        --        bondib1_0 (bondib1_1) bondib0     bondib0     ok        --        bondib0_0 (bondib0_1) bondib1_0 goes over net24 # dladm show-link | grep bond LINK                CLASS     MTU    STATE    OVER bondib0_0           part      65520  up       net21 bondib0_1           part      65520  up       net22 bondib1_0           part      65520  up       net24 bondib1_1           part      65520  up       net23 net24 is IB Partition FFFF # dladm show-ib LINK         HCAGUID         PORTGUID        PORT STATE  PKEYS net24        21280001A1868A  21280001A1868C  2    up     FFFF net22        21280001CEBBDE  21280001CEBBE0  2    up     FFFF,8503 net23        21280001A1868A  21280001A1868B  1    up     FFFF,8503 net21        21280001CEBBDE  21280001CEBBDF  1    up     FFFF On Express Module 9 port 2: # dladm show-phys -L LINK              DEVICE       LOC net21             ibp4         PCI-EM1/PORT1 net22             ibp5         PCI-EM1/PORT2 net23             ibp6         PCI-EM9/PORT1 net24             ibp7         PCI-EM9/PORT2 Outbound traffic on the 192.168.10.0 network will be multiplexed between bondib0 & bondib1 # netstat -rn Routing Table: IPv4   Destination           Gateway           Flags  Ref     Use     Interface -------------------- -------------------- ----- ----- ---------- --------- 192.168.10.0         192.168.10.2         U        16    6551834 bondib1   192.168.10.0         192.168.10.1         U         9    5708924 bondib0   There is a lot more traffic on bondib0 than bondib1 # /bin/time snoop -I bondib0 -c 100 > /dev/null Using device ipnet/bondib0 (promiscuous mode) 100 packets captured real        4.3 user        0.0 sys         0.0 (100 packets in 4.3 seconds = 23.3 pkts/sec) # /bin/time snoop -I bondib1 -c 100 > /dev/null Using device ipnet/bondib1 (promiscuous mode) 100 packets captured real       13.3 user        0.0 sys         0.0 (100 packets in 13.3 seconds = 7.5 pkts/sec) Half of the packets on bondib0 are outbound (from self). The remaining packet are split evenly, from the other nodes in the cluster. # snoop -I bondib0 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib0 (promiscuous mode) 100 packets captured   49 node1-priv1.us.oracle.com   24 node2-priv1.us.oracle.com   14 node3-priv1.us.oracle.com   13 node4-priv1.us.oracle.com 100% of the packets on bondib1 are outbound (from self), but the headers in the packets indicate that they are from the IP address associated with bondib0: # snoop -I bondib1 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured  100 node1-priv1.us.oracle.com The destination of the bondib1 outbound packets are split evenly, to node3 and node 4. # snoop -I bondib1 -c 100 | awk '{print $3}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured   51 node3-priv1.us.oracle.com   49 node4-priv1.us.oracle.com Conclusion: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic.

  Read the article

• Unable to mount USBDRIVE Error creating moint point: Permission denied

  - by steve

  Whenever I plug a usb into my computer a window pops up and says Unable to mount [Name of USB] Error creating moint point: Permission denied steve@goliath:/$ uname -a Linux goliath 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux steve@goliath:/$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f716ee1 Device Boot Start End Blocks Id System /dev/sda1 1 234441647 117220823+ ee GPT WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f710ee1 Device Boot Start End Blocks Id System /dev/sdb1 1 2930277167 1465138583+ ee GPT Disk /dev/sdc: 16.0 GB, 16005464064 bytes 74 heads, 10 sectors/track, 42244 cylinders, total 31260672 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 31260671 15626304 c W95 FAT32 (LBA) steve@goliath:/$ sudo mkdir /media/external mkdir: cannot create directory `/media/external': Permission denied steve@goliath:/$ sudo mkdir /media/usb0 mkdir: cannot create directory `/media/usb0': Permission denied steve@goliath:/$ sudo ls -l / | grep media drwxr-xr-x 3 root root 4096 Oct 3 22:48 media steve@goliath:/$ ls /media/ -a . .. MediaShare MediaShare is the the directory on my server that has all my movies and music. If there is any information I left out please let me know.

  Read the article

• How do I require use of the 5 GHz band when connecting to a Wireless N access point?

  - by cqcallaw

  What is says in the topic: there's a Wireless N access point to which I'd like to connect using the 5 GHz band exclusively. How does one accomplish this? Using the directive band=a in the connection configuration file in /etc/NetworkManager/system-connections doesn't seem to affect anything (/var/log/syslog still shows attempts by wpa_supplicant to connect using the 2.4 GHz band), and running iwconfig wlan0 freq 5G per this question results in the following error: Error for wireless request "Set Frequency" (8B04) : SET failed on device wlan0 ; Invalid argument. [Edit] I'm hoping the answer won't depend on the hardware in use, but here's some information about the hardware, just in case: System is an Asus ZenBook Prime UX31A-DB51, running Ubuntu 12.04. lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:04.0 Signal processing controller: Intel Corporation Device 0153 (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 00:1f.6 Signal processing controller: Intel Corporation Panther Point Thermal Management Controller (rev 04) 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) The driver for the wireless interface is iwlwifi.

  Read the article

• Wirelessly Sync Photos From iPhone To Computer Using CameraSync

  - by Gopinath

  How do you upload photos captured on your iOS device to your computer? By connecting the device using a cable and then syncing up with an app?? Ah..is’nt it a boring way. Here comes CameraSync – an app that lets you wirelessly send your iOS device photos to DropBox, so that you can access on your computer irrespective of the platform (Windows, Mac, Linux). By the way, this app works in the background and syncs the  files without disturbing  you. You don’t like DropBox? CameraSync works with a variety  of cloud services : Flickr, Amazon S3, iDisk, FTP and Box.net. If you looking for a step by step guide on how to setup CameraSync for DropBox then check this post. CameraSync cost $1.99 and runs on iOS4.0+ devices. CameraSync [iTunes App via Lifehacker] This article titled,Wirelessly Sync Photos From iPhone To Computer Using CameraSync, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• How to connect MTS MBlaze on ubuntu 11.04

  - by murali_ma

  i have installed ubuntu 11.04 inside the windows xp. i have MTS Mblaze USB Modem. (my service provider is MTS MBlaze,india) i want to use Mblaze into ubuntu so that i did the following steps for make connecting the device. from the task bar->edit connections->mobile broadband->choose country->mts mblaze and ok i give username and password ([email protected] and password MTS. ok now i enable mobile broadband , MTS MBlaze connection1(connection name) from task bar. steps followed from "http://randomshandom.wordpress.com/2010/12/20/how-to-connect-mts-mblaze-device-in-ubuntu-10-10-11-04/#more-3" for the first time it successfully connected and browse the internet. after i restart the system i connect it. it does not connected. it shows Modem network disconnected. i accessed many times and delete the connection and recreated but i does not help me. if i try to connect device i think it the search the network, i saw the wave signal. img Image for showing problem:

  Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >