Search Results

Search found 23832 results on 954 pages for 'home drive'.

Page 171/954 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

  • How to use 2 or more internet connections on the same network?

    - by Rogue
    Living in a joint family we have 3 internet connections, each floor has one internet connection which is split per floor. Each internet connection is shared between 4-5 computers using a switch per floor. Each of these internet sharing networks are independent of each other. What I want to achieve here is a local network (for local messenger and file sharing) that can combine all the 3 independent networks, problem is that whenever I try to do that the whole network tends to use just one internet connection. I have all the necessary hardware. How do I solve this problem, one approach could be that I could get one PC to act as a server and bridge the internet connections and then the whole network would have to access the internet through this server. Theoretically this could be possible but I have never tried this approach in real life. Also if certain computers need be restricted from internet access how would this be possible on the same network?

    Read the article

  • Automatically distinguish difference between multiple HDDs in linux?

    - by Jakobud
    I'm running Ubuntu Server 9.10. I have two external USB HDDs. I use them each for different backup reasons. So certain data gets stored on one HDD, and different information gets stored on the other HDD. I want to make a script that can look at the external HDD can determine which HDD it is, so that it can copy the proper information to it. Is there a way for Linux to determine this? Like if I see one HDD as /dev/sdc1, then unplug it and plug in the other HDD, should Linux see it as /dev/sdd1 or will it be /dev/sdc1? I'm a bit of a Linux newb and I don't quite understand how it determines the /dev/sdxx values that it assigns to drives.

    Read the article

  • What are the replacement options for an IDE hard disk for a DOS based system?

    - by dummzeuch
    I have got a few "embedded" systems running MSDOS 6.2 which boot from and store data to IDE hard disks. Since these drives are nearing their end of life, the question arises how we can replace them. The requirements are: DOS must be able to install and boot from these drives. They must be able to sustain heavy (mostly) write access. If possible, they should be able to survive moderate vibrations (not too bad since the current hard disks have survived several years of that) I considered the following options so far: other ide hard drives: Unfortunately modern IDE drives are too large so DOS cannot boot from them even if I create small partitions. Older IDE drives are just that: old, so they are probably not the most reliable ones any more. SSDs: There are a few SSDs with IDE interface available. I have not yet tried them. Does anybody have any experience with them? They look like the ideal replacement provided that DOS can boot from them and that writing speed does not deteriorate too much (the old hard disks are no race cars either). Compact Flash: There are adapters for using CF with IDE controllers and they work fine. DOS can boot from them and they have no problems at all with vibrations. What I am not sure about is their durability. DOS uses FAT so some very few sectors are written every time the medium is being written to. IDE to SATA converters: I have no idea whether they are any good. Has anybody tried them? It might be an option to use one of these to connect an SATA SSD to the system. Are there any alternatives that I have missed? (We are working on replacing these systems, but it will still take a few years.)

    Read the article

  • Brand new Seagate HDD has high raw read error rate

    - by kpax
    I've just purchased a brand new Seagate ST31000524AS 1TB HDD. Manufacture date shows as January 2012 (yes that's as new as new can get), so must be one of the new batches from the post-flood Thailand. Anyway, I downloaded a copy of Active Hard Disk Monitor tool to check the S.M.A.R.T. parameters and I find the parameter Raw Read Error Rate is very low. Should I be worried? Will this rectify over time? This hdd is just 7 hours old; what gives? Edit: I meant high raw read error rate - Title updated accordingly

    Read the article

  • How do I make a USB stick from which to install different OS's?

    - by Hanno Fietz
    Recently, I have made a number of USB sticks to install OS's (several Linux flavors, BSD, Windows) from, on machines that didn't have CD drives. Now, I would prefer to not overwrite the install USB sticks all the time, since it's handy to have them, but neither do I want to pile up USB sticks that I only need every 6 months. It would be great to have a bootable USB stick that fires up some minimal system, lets you choose an ISO image and then reboots from there. How would I go about this? Do I use some minimal Linux? Is there some kind of modified / specialized boot loader? Can I set up GRUB to do this? Should I use virtualization?

    Read the article

  • frequent errors with subversion repository on fat32 on USB memory stick

    - by sal
    I keep a copy of a Subversion Repository on a USB memory stick that is formatted with FAT32. I am using TortoiseSVN on XP and command line svn 1.6.x on Ubuntu and OSX with this memory stick. I notice that I need to do an svn cleanup just about every time or updates and commits will not work. I routinely have errors with .lock and *.svn/text-base/** files getting corrupted. Errors tend to be parameter is incorrect or lock file can not be read Sometimes svn cleanup works and sometimes chflags -R nouchg * Is there anything I can do to prevent this?

    Read the article

  • Using Ubuntu switch a failing windows 7 harddrive?

    - by firefusion
    My laptop harddrive has developed some serious read errors in the windows partition. Windows 7 still boots but every single action takes an aeon, and it is definitely due to a harddisk error not due to any spyware. I'm using the Ubuntu partition now. I've ordered a new harddrive but my laptop didn't come with a Windows 7 install disk (I think I was meant to make one with the windows 7 tools). So how can I install Windows 7 on my new harddrive?

    Read the article

  • "Can't find root filesystem / error mounting /dev/root" when booting to new kernel

    - by salparadise
    I am trying to upgrade my kernel from 2.6.18-274 to 2.6.39 for some wireless card drivers. When I boot into the new kernel I get the "Can't find root filesystem / error mounting /dev/root" googling led me to this page http://fedoraproject.org/wiki/Common_kernel_problems#Can.27t_find_root_filesystem_.2F_error_mounting_.2Fdev.2Froot From what I am reading seems to be an issue with a driver for my SATA controller or HD, but I can't find what option I need to add to the kernel. Doing a diff from the old initrd to the new one gives me the following: root-> diff /tmp/kafter /tmp/kbefore 6a7,8 > lib/dm-message.ko > lib/dm-region_hash.ko 8a11 > lib/dm-raid45.ko 13d15 < lib/dm-region-hash.ko 16a19 > lib/dm-mem-cache.ko Do I need any of those? not sure if I would need dm-raid45.ko as I am not running a raid. I have the same SATA and IDE options configured for both kernels so not sure what else to look for, any help is appreciated. Additionally here is the HW info: 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Hewlett-Packard Company Unknown device 3006 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233 I/O ports at 1818 [size=8] I/O ports at 1830 [size=4] I/O ports at 1820 [size=8] I/O ports at 1834 [size=4] I/O ports at 14f0 [size=16] Capabilities: [70] Power Management version 2 root-> smartctl -a /dev/sda ... === START OF INFORMATION SECTION === Device Model: WDC WD5000AADS-00S9B0

    Read the article

  • Ubuntu 12.04 doesn't detect hard disk partitions

    - by m0skit0
    I just installed Ubuntu 12.04 32-bit on an ASUS Laptop and wanted to install it in another one, the ASUS A55V. After booting the laptop and setting up Windows 7 (I unfortunately cannot wipe out Windows), and creating one extra partition to install Ubuntu there, when I reboot from USB and launch Ubuntu installation, it doesn't recognize any partition on /dev/sda, but shows the whole disk as unpartitioned. I guess this is due to UEFI, but I don't know how I can make Ubuntu see the partitions created by Windows. Or any workaround for this to be able to install Ubuntu on /dev/sda. Thanks in advance

    Read the article

  • install Ubuntu and remove Windows 7

    - by dani
    I'm using Windows 7 on my laptop (2GB RAM, 250 GB HDD). I want to install Ubuntu and remove Windows 7. I have Partitioned my laptop into 2 partitions: , C Drive - 105 GB and D Drive - 145 GB. I want to install Ubuntu on C drive all my data in D drive, no backup I have already selected the "Try something else option " /dev/sdb /dev/sdb1 ntfs 104855 MB unknown C drive /dev/sdb5 ntfs 145192 MB unknown D drive I need help using the "Try Something Else" Option My course of action: laptop power on bootubuntu nextsomething elsepartition.

    Read the article

  • Completely replacing (upgrading) a RAID 5 array of disks on an ESXi server

    - by jshin47
    I have a development server that runs several VM on ESXi 5. It has an array of disks in the RAID 5 configuration where all of the disks are currently the same size. I would like to expand storage on this box greatly, but I am not sure what the smartest way to go about this would be. My current plan is to: Turn off all VM Copy VM folders from server to another location Verify that I can mount all the VM on the new location (ie that the copy went ok) Replace all the disks with new, bigger ones Reinstall ESXi5 Copy the VM back over This seems like it might take a while to accomplish and is not terribly slick, especially since I will have to reconfigure ESXi 5, but is there a smarter alternative?

    Read the article

  • Raid recovery in gigabyte GA-8I945 Pro

    - by epeleg
    This was a working machine until a few days ago. And now it won't boot into the OS, during startup if makes clicking sounds (I think from one of the drives). Installed OS: Windows 2003 Web edition Hardware: Gigabyte GA-8I945P Pro , 2*160G Sata in RAID1 configuration , 2 Volumes – 25G and the rest. When I installed windows on it, during setup, I pressed F6 and used ICH7DH drivers of RAID. The manual for the MOBO says: Step 1: After the POST memory test begins and before the operating system boot begins, look for a message which says "Press to enter Configuration utility" (Figure 4). Press CTRL+ I to enter the RAID BIOS setup utility. But the machine never shows this message. BIOS SATA RAID/AHCI Mode is set to RAID. Any ideas or pointers on what I can do to recover my data? Thanks

    Read the article

  • How to find out which app locks a given USB storage device?

    - by Dimitri C.
    I'd like to unplug my USB mass storage device, but I get the following error message from Windows: Windows can't stop your 'XYZ' device because it is in use. Close any programs or windows that might be using the device, and then try again later. How can I find out which application locks the device, so I can safely unplug it without having to close all running applications first? Note: I'm working on a Windows Vista system.

    Read the article

  • How to use File History with Recovery partition?

    - by Karl
    I formatted the recovery partition right after installing Windows 8. I'm curious as to why File history only allow the use of external HDD. Instead of using the Recovery Partition. I can't find a way to use it. I decided to use it exclusively for Restore Points. Is there any way to make the Recovery Partition exclusively for the use of File History? Or should I use 3rd Party programs instead, (Easeus Todo Backup, Macrium Reflect, etc)?

    Read the article

  • Cancelled a format using diskpart at 0%. Can I get the data back?

    - by Sudarshan
    I wanted to format my USB thumbdrive, but incorrectly did the following on my external HDD!! CMD -- Diskpart select disk 2 clean create partition primary select partition 1 active format fs=fat32 While it was still at 0% however, I cancelled the format and quit from CMD. I can no longer see the HDD in My computer though, and it shows up as below in diskpart Disk 1 Status - Online Size- 1800 GB Free - 0B Is there anything I can do to get the data and HDD back?

    Read the article

  • How long do uploaded files stay in the tmp folder in Linux Ubuntu?

    - by Jean-Nicolas Boulay Desjardins
    I am building a web application where my users will be able to upload files. After the files are uploaded I need to send the files to two other servers, and after they will be deleted from the server where they were just uploaded to. I am wandering is it a good I idea to keep the uploaded files in the tmp/ folder the time the uploaded files are sent to the other two servers or should I move them to another folder incase they get deleted? I am also wandering because I would like to know if I have to build a cron script to get rid of the files that have been transfered to the other servers so that I get my disk space back.

    Read the article

  • XP: cannot assign a letter to a FAT32 partition

    - by Toc
    I have an external hard disk, where I have created many partitions to use also in Linux. The first two partitions are FAT32. The third is a Truecrypt Partition. I cannot assign a letter to the second partition. When I go to Manage disk and make right clic on the unassigned partition, most of the items are not enables. See screenshot: http://i42.tinypic.com/ofsh9u.jpg What have I to do to see this partition on my XP pc?

    Read the article

  • My WD passport detected but not shown on my computer

    - by Rakesh Patel
    1TB WD harddisk is detected in laptop but drives not visible on my computer. Under disk managment drives shown without letters. Right clicking on these drives give 2 options: Delete volume Help. The same harddisk was running well on the same laptop a day before. It is also showing full size of hard drives, Healthy (Primary Partition) etc. (this happened after harddisk usage by guest). Harddisk is new only (about 5 month usage) Please suggest: Is there hardware related problem inside harddisk, if so is it repairable? Is there any option to recover data?

    Read the article

  • can I consolidate a multi-disk zfs zpool to a single (larger) disk?

    - by rmeden
    I have this zpool: bash-3.2# zpool status dpool pool: dpool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM dpool ONLINE 0 0 0 c3t600601604F021A009E1F867A3E24E211d0 ONLINE 0 0 0 c3t600601604F021A00141D843A3F24E211d0 ONLINE 0 0 0 I would like to replace both of these disks with a single (larger disk). Can it be done? zpool attach allows me to replace one physical disk, but it won't allow me to replace both at once.

    Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >