Search Results

Search found 7777 results on 312 pages for 'my resources'.

Page 171/312 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

• How to use chain.p7b with Apache?

  - by Debianuser

  I wanted to setup a SSL website on Apache and applied for a certificate from my local ISP. All they sent me was a single file named chain.p7b. I have always used certificates from other vendors without any issues but they usually provide two files to be configured as SSLCertificateFile and SSLCertificateChainFile in Apache. Following instructions from several online resources, I opened the p7b file in Windows and extracted 4 certificates from the file. I then tried configuring Apache with one of the files and it worked, but shows a warning: The certificate is not trusted because no issuer chain was provided. I though I have to use remaining 3 files as SSLCertificateChainFile and/or SSLCACertificateFile. I tried that but it didn't work so I am assuming it might be something completely different. Anyone faced this issue before? The following page http://www-01.ibm.com/support/docview.wss?uid=swg21458997 talks about using a keystore but is that relevant to Apache?

  Read the article

• How do I set up disk quotas over LDAP on CentOs?

  - by Noxshun

  I've been google-ing for some time and I haven't been able to find any resources or hints on the subject. I am wondering if it is possible to do so, if so how? Any nudge in right direction will be appricated. I do know that if you download and install "Linux Quota" from source, you'll get some perl scripts which are supposed to aid with the matter. But there is as far as I know absolutely no good documentation to help you along the way. I am also running a NFS server from the same machine. Note: This is for a university assignment, so I might be totally stupid for asking this question. I am trying to explore the options. If there is a better way of solving this, please do tell. Edit: Here is a link to the site of Linux Quota. They do include a LDAP schema, so it should be possible.

  Read the article

• How can I disable HTML5 content in popular browsers like Firefox and Chrome?

  - by HRJ

  The bad thing about Flash video was that it required a third-party plugin to play the content. The good thing was I could select which content to play; using the click-to-play feature in Firefox and Chrome. But now that HTML5 video is getting popular, I see a lot of ads popping into view again. They are not only a distraction, they hog resources on my computer and make the fans spin full speed. Is there a way to disable HTML5 audio/video content by default, and enable it only selectively?

  Read the article

• Micrsoft fax server not seeing new modem

  - by Tim Meers

  I recently added a new modem (a plain ol consumer grade one) to a fax server thats been up and running for years running on Microsoft Server 2003 fax services. The server currently has two modems, the new one is identical to one of the existing. After installing the new modem it showed up in the Fax Server Manager as a device but was not doing outbound faxes. (The server by default does not handle incoming.) So after a reboot the server no loger sees the modem in the Fax Server Manager but is listed as a device in device manager. I've attempted to restart just the fax service and even the whole box again but to no avail. Any one have any ideas on this one? Or any one with good links to resources for the fax service?

  Read the article

• How do I add an Approver to SharePoint 2010?

  - by CompGeekess

  I am still new to SharePoint and am learning so much, but have came in to a few hic-ups and here is one. I want to add an approver to SharePoint 2010 who has FULL CONTROL. My manager requested that I find out where the approval request are going and redirect them to him. (I have no idea where or how to find this out). Is this possible to do on the Central Administration or must I go into each site/subsite and set him to be the approver this way? Googled and the site was showing me how to approve workflows or how to create approvals, my other resources didn't give much help either. So far I had gone into a few individual sites and set my manager and I up as approvers with full control, but am uncertain if this is the correct procedure or if there is a better way to do this. For example, have the lower levels inherit from the higher level - set security at the highest level and cascade to the child levels. Thank You.

  Read the article

• Error 18446744073709551615 when running iptables in OpenVZ container

  - by xsaero00

  This is related to the question I asked before. Now I am getting a different error. iptables: Unknown error 18446744073709551615 when trying to apply a simple rule in VZ container iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 8080 I have done everything that was suggested to do on hardware node and container but the error persists. On hardware node: /etc/sysconfig/iptables-config IPTABLES_MODULES="ip_conntrack_netbios_ns ipt_REJECT ipt_tos ipt_TOS ipt_LOG ip_conntrack ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length ipt_state iptable_nat ip_nat_ftp" /etc/vz/vz.conf IPTABLES="ipt_REJECT ipt_tos ipt_TOS ipt_LOG ip_conntrack ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length ipt_state iptable_nat ip_nat_ftp" /etc/rc.local modprobe xt_tcpudp; modprobe ip_conntrack; modprobe xt_state container config IPTABLES="ip_tables iptable_filter iptable_mangle ipt_limit ipt_multiport ipt_tos ipt_TOS ipt_REJECT ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_LOG ipt_length ip_conntrack ip_conntrack_ftp ipt_state iptable_nat ip_nat_ftp " I have restarted HN and container numerous times, but the error is still there. It seems like all config is in place but something like lack of some resources is preventing the rule from being applied. Thanks for any help.

  Read the article

• What is OpenSVC?

  - by sh-beta

  OpenSVC was just ported to the FreeBSD platform. The little blurb in that announcement intrigued me so I went to the OpenSVC website and found this: OpenSVC is a 'service' manager, as in clustered service manager, designed for real-world heterogeneous datacenters and large-scale operations orchestrator (disaster recovery, for example). Services are collections of resources (virtual machine, ip, disk groups, filesystems, file synchronizations, and application launchers). Services can be started, stopped and queried for status, providing a consistent command set for wildly different service integration types. Service configurations, status and logs are pushed to a central database coupled to a web front-end (collector). Services can be administered using the stand-alone GPLv2 software stack deployed on the nodes (nodeware), or through the web-front end. Plus some UML-type graphics. Which is all neat, but I still don't understand: what does it do? Am I just being dense? What's the use case for this system?

  Read the article

• What is the lightest, basic Email Server for Linux?

  - by Xeoncross

  I would like to install an extremely small mail server on my VPS and I am only interested in it sending out mail (activation links) from my web site. I don't need it to support mailboxes or incoming mail (although having that option for the future might be nice). The main requirement is that I don't have to worry about monitoring it as often and protecting against people bouncing messages off my server or wasting resources with incoming mail. I just want to send mail out. So something small that only listens on localhost would be ideal. The other requirement is that it is documented so I can learn how to set it up and manage it.

  Read the article

• How to manage large number of desktop VMs?

  - by symcbean

  I'm looking at the feasibility of providing remote access to multiple virtual machines. The VMs themselves will provide user desktops. To make best use of the available resources, I'd like the VMs to hibernate when the user disconnects. Which implies being able to start them up when a user connects. Ideally each user would 'own' a VM image - but if not then I'd require that the session was terminated. Obviously this would require the remote access protocol to be tied into the VM management. Is there anything out there to provide such functionality? (extra credit for open protocols! ;)

  Read the article

• Windows 7 x64. Some 32 bit applications refuse to install.

  - by user250712

  I have been having problems lately when trying to install older games onto my PC. It is only with 32 bit applications. A few games that will not install are: Drakan: Order Of The Flame TA Kingdoms (Total Annihilation installed fine) Baldur's Gate. In Baldur's Gate, when I use autorun.exe and choose install, the autorun closes and the computer loads for a second (as it should) then nothing pops up. Ten minutes later still nothing, so I try again, still nothing. So next I use Setup.exe. Still nothing. I run it in every compatibility mode, and as Administrator in every mode, still nothing. Then I open Task Manager, and there are about 80 setup.exe processes running, all of them doing nothing and taking up next to no resources.

  Read the article

• How to move a windows machine properly from RAID 1 to raid 10? [migrated]

  - by goober

  Goal I would like to add two more hard drives to my current RAID 1 setup and create a RAID 0 setup on top of the two RAID 1 setups (which I believe is referred to as "RAID 10"). Components Involved Intel P68 Chipset Motherboard 4 SATA ports that can be configured for Raid An intel SSD cache that sits in front of the RAID, and a 64 GB SSD configured in that manner Two 1TB HDDs configured in RAID 1 OS: Windows 7 Professional Resources Consulted so far I found a great resource on LinuxQuestions.org for a good "best practices" process for Linux machines, but I'd like to develop a similar process that I know works on Windows Machines.

  Read the article

• ESXI with non standard hardware HDD issues

  - by Hurricanepkt

  I have 3 very underutilized servers that I am condensing to one of those shuttle PC's with VMWare ESXi The HDD seems to be the bottle neck right now (the light is almost always pure solid) right now I have a single 1TB Seagate 7200.11 connected by SATA. VMWare ESXi cannot detect it when running in AHCI mode, but does when running in IDE mode. I have read that IDE mode can give a 5% performance hit which might give me enough breathing room. However, I am open to setting up an external eSATA or some sort of raid to give me more than just the 5%. I am just weary of sinking some money into a bit of hardware without knowledge of whether it will work. Does anyone know of resources or procedures of how to get this working.

  Read the article

• Learn Linux Command Line for Web Server Management [closed]

  - by Jonathan

  I've searched high and low for a good resource for learning the Linux command line. I've found a handful of separate resources, but none that really can assist in web server management. I'm currently learning through trial an error with 'man' pages, along with Google. I was just wondering if anyone had a solid resource that they used to learn, and would be willing to share it with me. Thanks so much for your time, I really appreciate it! EDIT: I have a few CentOS servers at current, and I know the basics, I'm just trying to get to a more advanced level.

  Read the article

• How do I get a PDF link in a Word document to open in the default browser?

  - by Tweek

  I'm trying to create a Word document with links to resources on the web. If I create a hyperlink to a regular HTML file, when I click on the link, it opens in my default browser (Google Chrome) as expected. However, if I click on a link to a PDF file on a website, it opens in Internet Explorer. Before it opens, I also get the following prompt: Microsoft Office Opening http://www.example.com/example.pdf Some files can contain viruses or otherwise be harmful to your computer. It is important to be certain that this file is from a trustworthy source. Would you like to open this file? OK Cancel I'm using Office 2010, but I'm asking for a user who is using Office 2007 and is experiencing the same issue. (His default browser is Firefox.) We're both on Windows 7.

  Read the article

• Is it possible to view Facebook news feeds page by page rather than loading it all as I scroll?

  - by oscilatingcretin

  If you want to scroll through your Facebook news feed (be it on the main feed, your personal feed, or in groups) to older parts, you have to scroll to the bottom, wait for the ajax load of the next part of the feed, and repeat. The problem with this is that, if you're scrolling down very far, the HTML document just gets bigger and bigger until your browser starts to die due to the overload of resources brought on by added HTML, text, and even images. This pretty much sets a limit to how far back you can scroll. Clicking on months and years on your personal feed has the same effect of cumulatively adding feed segments to the HTML document. I notice that this month/year feature is not available on the main feed and for groups. If there were a way to literally page through the feed so that only a single page's worth of feed data is loaded at a time, that would make scrolling through it much more doable.

  Read the article

• How can I deactivate the gnome desktop of my ubuntu server?

  - by 19 Lee

  I'm running a home server on my old laptop (atom cpu). I installed ubuntu 12.04 server edition, but I also installed ubuntu-desktop. So, when I turn it on, ubuntu desktop is shown. I sometimes use GUI, but I want to turn the ubuntu-desktop (gnome-desktop) off when I don't use it. I think I can save resources by turning off the GUI. It's necessary since my laptop's performance is not very good and it often becomes very hot. I guess I can run ubuntu-desktop on my terminal with "startx" command. But, I don't know how to turn the X window off for a moment. Anybody have an idea? Thanks in advance.

  Read the article

• Several devices in Device Manager have Code 3 error

  - by John Straka

  One of our users' machines (Dell Optiplex 380 running Windows 7 32-bit) is having a weird driver issue. A bunch of devices have Error Code 3: The driver for this device might be corrupted, or your system may be running low on memory or other resources. (Code 3) The system isn't low on memory (only 1GB in use out of whatever the max for 32-bit is.) Here's a screenshot of the affected devices: I tried reinstalling the chipset and audio drivers to no avail. I have no idea what prompted it, and I'm not sure how the basic Windows Generic PnP Monitor driver could even be corrupted. What might be causing this error?

  Read the article

• Change MacOS X guest screen resolution for VirtualBox

  - by Pymoo

  I have tried all alternatives and resources that I found on internet to achieve to change screen resolution in my MacOS X guest. I have the latest VirtualBox version (4.1.22) and I have MacOS X 10.6.3 Snow Leopard running in a vm guest. Some solutions that don't work for me are: Tuning virtual machine settings: Adding and in the .vbox file, or running these two commands: vboxmanage setextradata "MAC OS X" "CustomVideoMode1" "1360x768x32" vboxmanage setextradata "MAC OS X" "GUI/CustomVideoMode1" "1360x768x32" Editing Guest OS boot configuration: Modify /Library/Preferences/SystemConfiguration/com.apple.boot.plist with these lines: <key>Kernel Flags</key> <string>"Graphics Mode"="1360x768x32"</string> <key>Graphics Mode</key> <string>1360x768x32</string> Any other suggestion, something that I was missing. Thanks in advance,

  Read the article

• Backing up an rsnapshot directory to a remote device

  - by user123480

  I have a local backup server that uses rsnapshot with hard links that contains about 10TBs of information which add about 4 to 5GBs per day. It's works great. I've been requested to set up and maintain a remote backup of the local rsnapshot directory structure. It's a nightly backup. I've tried using rsync with encryption which takes forever and eats system resources. A previous post says not to use rsync with hard links for that reason. I need a suggestion of how I can keep the local and remote copies of the rsnapshot structures in sync? Thanks

  Read the article

• Receiving a notification on a Cluster Group Failover

  - by Diego

  Hi all, I have several Windows Cluster set up and I have the need of keeping track of failovers. I'd need to receive a notification of sort whenever a group fails over. I've seen some examples around, but I can't rely on the approach of just sending a message whenever the resources are stopped/restarted as it would generate too many false alarms. In few words, I need to be notified if and only if the group really fails over. I was thinking that probably the best way is monitoring the System Event Log, but, if possible, I'd prefer not having to write a script/program from scratch for this issue. Is there any script/product that already does it? Thanks.

  Read the article

• How to generate good serials for DNS zones with Puppet?

  - by Bittrance

  My tradition is to set all zone serials to the timestamp at modification. Now that Puppet is my new religion, I want to set serial timestamps when building zone files from exported resources. A somewhat trivialized example may look like this: file { "/tmp/dafile": content = inline_template("<%= Time.now.to_i %>"), } The problem with this approach is that content will be different all the time, which will (ultimately) provoke rebuilding of zone files on each puppet config poll. Is there some way I can insert a timestamp without it being included in the data that is compared against previous state?

  Read the article

• How to send a direccion to the void using the Hosts file and without using 127.0.0.1?

  - by magallanes

  I have some name address that i want to send straight to the void using the HOSTS file but i don't want to use the 127.0.0.1. How can i do that?. Why?, I want to speed up some proccess but 127.0.0.1 is serving a webserver, so if i use 127.0.0.1 then this process will call my webserver, consuming resources and may be delaying the process. Right now, i am using 0.0.0.0 instead of 127.0.0.1 but i am not sure if it is correct. 0.0.0.0 crl.microsoft.com

  Read the article

• Why do mapped drives only reappear after logging out and back in, and not after a reboot?

  - by razumny

  I work in a corporate environment, where we use mostly Windows 7 Professional computers, though some legacy applications are still being run on Windows XP. We have security in place on the network not to allow access to network resources to computers that are not members of Active Directory. When logging in, our users get their home folder and a common network drive mapped to H: and F:, respectively. Sometimes, this does not happen, and the drives are not mapped. The solution is to have the user log off, and back in to Windows. If they reboot, the drives remain unmapped. Does anyone know why this may be?

  Read the article

• Playing games over RDP and utilizing other res of powerfull PC... [closed]

  - by Alex

  Possible Duplicate: Is it possible to run games over remote desktop? Hey guys, I have the one question..that may be not usual but very interesting.. Well, I have laptop and some powerfull PC, now I want to utilize ALL energy of the powerfull PC on my notebook.. for example, run games like F.E.A.R on powefull PC and next play it over the Remote Desktop on my laptop.. both PC may be connected lan < lan, or thru Wi-Fi, or FireWare, or (?) any other way that does not matter.. Google told me that it won't work over RDP due to protocol lacks and there should be many bump on the road on that way.. but, maybe , you guys will give me the right point ? Let's formalzie.. we'd like to utilize all resources of one PC on another PC via network, how we should do that ? Any ideas?

  Read the article

• UID uniqueness of IMAP mails

  - by SecStone

  In our internal webmail system, we'd like to attach notes and contacts to certain mails. In order to do this, we have to keep track of every mail on our IMAP server. Unfortunately the IMAP standard doesn't enforce the uniqueness of the UID of a mail in a mailbox (just in subfolders). Is there any tool/IMAP server which generates UIDs which are truly unique? Or is there any other way how we can identify each mail? (the Message-ID header field is not unique as some mails do not contain such a field). Additional resources: Unique ID in IMAP protocol - Limilabs.com

  Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >