Search Results

Search found 12371 results on 495 pages for 'ok'.

Page 172/495 | < Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >

• Oracle 11g network configuration

  - by Kylo

  I installed Oracle 11g Enterprise Edition on my Windows 7 Pro. My problem is that I cannot log into database from other host (local network). When I connect to database using Oracle SQLdeveloper everything is ok as long as I specify 'localhost' in connection configuration. However, when I change it to '192.168.0.190' which is my host IP address I get 'The Network Adapter could not establish the connection'. I get the same error when logging in from other host in local network. What is the problem?

  Read the article

• If-Modified-Since vs If-None-Match

  - by Roger

  This question is based on this article response header HTTP/1.1 200 OK Last-Modified: Tue, 12 Dec 2006 03:03:59 GMT ETag: "10c24bc-4ab-457e1c1f" Content-Length: 12195 request header GET /i/yahoo.gif HTTP/1.1 Host: us.yimg.com If-Modified-Since: Tue, 12 Dec 2006 03:03:59 GMT If-None-Match: "10c24bc-4ab-457e1c1f" HTTP/1.1 304 Not Modified In this case browser is sending both If-None-Match and If-Modified-Since. My question is on the server side do I need to match BOTH etag and If-Modified-Since before I send 304. Or Should I just look at etag and send 304 if etag is a match. In this case I am ignoring If-Modified-Since .

  Read the article

• Setting multiple Apache2 VirtualHosts with the same DocumentRoot?

  - by sobi3ch

  I'm trying to accomplish something like this DocumentRoot /www/_offline.com <VirtualHost *:80> ServerName example1.com ServerAlias www.example1.com </VirtualHost> <VirtualHost *:80> ServerName example2.com ServerAlias www.example2.com DocumentRoot /www/_offline.com </VirtualHost> Is it possible to have ONE documentRoot for different domains? VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:80 is a NameVirtualHost default server localhost (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost localhost (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost aa.atd (/etc/apache2/sites-enabled/all-phoenix-domains:2) port 80 namevhost atd.atd (/etc/apache2/sites-enabled/all-phoenix-domains:13) port 80 namevhost test (/etc/apache2/sites-enabled/test:1) Syntax OK

  Read the article

• Corrupted .WAR file after transfer from 32-64 bit Windows Server to Desktop or vice versa

  - by Albert Widjaja

  Hi All, Does anyone experience this problem of corrupted .WAR file after it has been copied over the network share ? this is .WAR file (Web Archive) the J2EE application file (.WAR file is compressed with the same zip algorithm i think ?) Scenario 1: Windows Server 2008 x64 transfer into Windows XP using RDP client (Local Devices and Resources) Scenario 2: Windows XP 32 bit transfer into Windows Server 2003 x64 using shared network drive (port 445 SMB ?) for both of the scenario it always failed / corrupted (the source code seems to be duplicated at the end of line when you open up in the Eclipse / Java IDE). but when in both scenario i compressed the file into .ZIP file everything is OK. can anyone explains why this problem happens ? Thanks, Albert

  Read the article

• Apache is running but there is no page displayed

  - by Michael Ozeryansky

  I am on a Mac OSX and I am using the built in PHP and Apache2. I have been setting up MySQL and finally when I got MySQL working my local site won't display. Do note that I did have the web server running and delivering PHP enabled pages, just no database connection. But my question is not about MySQL. I have changed various settings in the 'http.conf' file, and I have the line: '127.0.0.1 localhost' in my hosts file. I also have other alias' pointing to 127.0.0.1. I have checked everything I could about Apache and I have made sure that any message in the error_log is ok. I currently have my errorLevel set to debug, so I get all the messages. At this point (HOURS of self fixing) I think I need help. What can I provide for someone to figure this out with me. Thanks.

  Read the article

• rsync chown warning

  - by Ted Kim

  I try to sync two directories using rsync. the source is on Linux, and the other is on windows. So, I mount the directory on windows using the command mount -t cifs ..... in Linux system. Then I execute rsync .... Everything is OK, but rsync prints out rsync: chown "/mnt/windows/A/." failed: Permission denied (13) rsync: chown "/mnt/windows/A/readme.txt" failed: Permission denied (13) I want to sync the directories without changing ownership. How can I do? please let me know. Thanks in advance.

  Read the article

• mdadm raid5 recover double disk failure - with a twist (drive order)

  - by Peter Bos

  Let me acknowledge first off that I have made mistakes, and that I have a backup for most but not all of the data on this RAID. I still have hope of recovering the rest of the data. I don't have the kind of money to take the drives to a recovery expert company. Mistake #0, not having a 100% backup. I know. I have a mdadm RAID5 system of 4x3TB. Drives /dev/sd[b-e], all with one partition /dev/sd[b-e]1. I'm aware that RAID5 on very large drives is risky, yet I did it anyway. Recent events The RAID become degraded after a two drive failure. One drive [/dev/sdc] is really gone, the other [/dev/sde] came back up after a power cycle, but was not automatically re-added to the RAID. So I was left with a 4 device RAID with only 2 active drives [/dev/sdb and /dev/sdd]. Mistake #1, not using dd copies of the drives for restoring the RAID. I did not have the drives or the time. Mistake #2, not making a backup of the superblock and mdadm -E of the remaining drives. Recovery attempt I reassembled the RAID in degraded mode with mdadm --assemble --force /dev/md0, using /dev/sd[bde]1. I could then access my data. I replaced /dev/sdc with a spare; empty; identical drive. I removed the old /dev/sdc1 from the RAID mdadm --fail /dev/md0 /dev/sdc1 Mistake #3, not doing this before replacing the drive I then partitioned the new /dev/sdc and added it to the RAID. mdadm --add /dev/md0 /dev/sdc1 It then began to restore the RAID. ETA 300 mins. I followed the process via /proc/mdstat to 2% and then went to do other stuff. Checking the result Several hours (but less then 300 mins) later, I checked the process. It had stopped due to a read error on /dev/sde1. Here is where the trouble really starts I then removed /dev/sde1 from the RAID and re-added it. I can't remember why I did this; it was late. mdadm --manage /dev/md0 --remove /dev/sde1 mdadm --manage /dev/md0 --add /dev/sde1 However, /dev/sde1 was now marked as spare. So I decided to recreate the whole array using --assume-clean using what I thought was the right order, and with /dev/sdc1 missing. mdadm --create /dev/md0 --assume-clean -l5 -n4 /dev/sdb1 missing /dev/sdd1 /dev/sde1 That worked, but the filesystem was not recognized while trying to mount. (It should have been EXT4). Device order I then checked a recent backup I had of /proc/mdstat, and I found the drive order. md0 : active raid5 sdb1[0] sde1[4] sdd1[2] sdc1[1] 8790402048 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/4] [UUUU] I then remembered this RAID had suffered a drive loss about a year ago, and recovered from it by replacing the faulty drive with a spare one. That may have scrambled the device order a bit...so there was no drive [3] but only [0],[1],[2], and [4]. I tried to find the drive order with the Permute_array script: https://raid.wiki.kernel.org/index.php/Permute_array.pl but that did not find the right order. Questions I now have two main questions: I screwed up all the superblocks on the drives, but only gave: mdadm --create --assume-clean commands (so I should not have overwritten the data itself on /dev/sd[bde]1. Am I right that in theory the RAID can be restored [assuming for a moment that /dev/sde1 is ok] if I just find the right device order? Is it important that /dev/sde1 be given the device number [4] in the RAID? When I create it with mdadm --create /dev/md0 --assume-clean -l5 -n4 \ /dev/sdb1 missing /dev/sdd1 /dev/sde1 it is assigned the number [3]. I wonder if that is relevant to the calculation of the parity blocks. If it turns out to be important, how can I recreate the array with /dev/sdb1[0] missing[1] /dev/sdd1[2] /dev/sde1[4]? If I could get that to work I could start it in degraded mode and add the new drive /dev/sdc1 and let it resync again. It's OK if you would like to point out to me that this may not have been the best course of action, but you'll find that I realized this. It would be great if anyone has any suggestions.

  Read the article

• Backup to disk, encrypted, without any installed local software

  - by user30064

  Hi, Ok, this is a tough one, and it might not even be possible, but no harm in asking I guess. I have a Buffalo Terastation file server that I use for network attached storage. After a couple of phone calls to customer services I realised that there is no way to backup to disk encrypted. In effect, I would be carrying unencrypted company data off-site daily, which is obviously unacceptable. I had a go at TrueCrypt, EncFS, and a few others, and as far as I could see all of them required that you install some software on the machine that is to use the file system, which makes sense. Unfortunately the firmware on the Terastation is closed and I cannot install any software (and I can't build from source either, since Buffalo didn't include a compiler). Are there any ways to copy files to disk, where as soon as they are written to the disk they are transparently encrypted, without having to install additional software? I'm not sure it matters too much, but the Terastation firmware is Linux based, although as I mentioned, closed. Many thanks, Andreas

  Read the article

• Ubuntu VPS - email and webserver

  - by xZero

  I have a VPS based on Ubuntu, it has installed whole LAMP, everything needed for a web server and it works perfectly, but I'm still not able to configure it as a mail server.... I have configured MX record for my domain mail.mydomain.com and this part is OK, I also installed Postfix, Dovecot and Roundcube, configured it using this tutorial: http://ubuntuguide.org/wiki/Mail_Server_setup And after hours of configuring it doesn't work. I have experience with Linux and web hosting, but I successfully configured mail server once in past on Debian 6, and that with help from there. When I try to send email to me my gmail says: Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the server for the recipient domain mydomain.com by dc147738a1117e4c12273.mydomain.com. [MY_SERVER_IP]. The error that the other server returned was: 554 5.7.1 <[email protected]>: Relay access denied Also I have Webmin control panel which works perfectly, how to configure postfix and dovecot from there? Thanks in advance.

  Read the article

• Apache server in raspberry PI not visible from outside( public IP)

  - by Kronos

  I have made a fresh install of Arch Linux ARM into a Raspberry PI and I mounted there a LAMP, all fresh. I have another Arch(x86) in my laptop with Apache also there, and as far as I know, two web servers cannot run in the same network segment so, the problem is as follows. I my laptop, having Apache running, if I enter via the public ip of my network everything turns ok and I can see my website but, (obviously turning this server down) if I enter from the public IP with the Apache running in the raspberry pi( yes, only that Apache running) i cannot see my website in there. Also, if I access via local network it is a normal success, I can see my website. So, I can enter my raspberry website only via local but in my other web server i can enter it via local and public. I have the same conf files in both of them so what is the difference? I was planning in making the rpi as a development server. Thanks in advance

  Read the article

• net use mapping not working in batch files but works in cmd

  - by Philippe

  Ok so here's the problem : I've got users using logon script in the domain (username.bat). The script simply lists 4 or 5 (net use letter: \\SERVER\directory\). However, when they open their session, the logon script doesnt work and returns system error 53 or 67 for all of them. I tried running the script after the profile has loaded and evrything is running, and it still gives me the error. I've then tried to run the same command in the cmd.exe. Everything mapped correctly. It also works fine if I map the drives using the "Tools Map network drives" utility. Is there anything that can prevent a command to work when ran in a batch-file but works correctly when typed in manually?

  Read the article

• How to avoid tilde ~ in Bash prompt?

  - by Jirka

  Hello! I have set my prompt in bash in a such way that I can use it directly in scp command: My current PS1 string: PS1="\h:\w\n$" And the prompt looks like this: lnx-hladky:/tmp/plugtmp $ What I don't like at all is the fact that $HOME directory is displayed as tilde. Can this be avoided? It's causing problems when switching between different users. Example: lnx-hladky:~/DOC $ Documentation says: \w : the current working directory, with $HOME abbreviated with a tilde \W: the basename of the current working directory, with $HOME abbreviated with a tilde Is there any possibility to avoid $HOME being abbreviated with a tilde? I have found one way around but I feel like it's overcomplicated: PROMPT_COMMAND='echo -ne "\e[4;35m$(date +%T)\e[24m$(whoami)@$(hostname):$(pwd)\e[m\n"' PS1=$ Can anyone propose a better solution? I have a feeling it's not quite OK to run so many commands just to get prompt. (date,whoami,hostname,pwd). Thanks a lot! Jirka

  Read the article

• Server 2008 Hard Faults

  - by claw

  Hey all, plase bear with me as I haven't looked at a server in a very long time. The problem I am having is with a Windows 2008 Standard FE Service Pack 2 Intel Xeon X3430 @ 2.40 2.39 GHZ 4 GB Memory 64 Bit There seems to be no problems other than the physical memory peaking at 91%, always with over 100 Hard Faults Per Second. To my understanding hard faults should be fairly rare on a machine with. Are there any logs I can show you? Or investigate myself. The general performance of the machine is ok, i can access SBS2008 and change settings fairly smoothly without hangs etc. However, we connect to the server and do quite a bit of SQL via an application. For a record to retrieve say 20 rows, it can take 20+ seconds. Thanks in advance, Jamie EDIT: What the server is used for: IIS ASP Web Service SQL 2008 List item Exchange unable to upload screenshots due to low reputation - why doesnt my SO work here :)

  Read the article

• file-name encoding problems

  - by tenhouse

  I googled over this topic but couldn't find what I was looking for... the following "happend" to me: I had my files stored on a NTFS-USB Harddisk, because of space problems I moved them to an ext3 system....somehow the filename (content is still ok as far as I saw) encoding screwed up....my files look like the following now: Kküken <--- should have an "ü" Jäger <--- should be an "ä" Zwölf <--- should be an "ö" fünfte <-- should be an "ü" etc .... These are just examples, but already give me my first question Why has the "ü" two different representations? (Maybe I screw up, before I screw up and now I have a mixing of x different encoding-layers? :) ) I tried the following command: convmv -r -f UTF-8 -t ISO-8859-1 * This command work for some files (for example Zwölf) but not for all: iso-8859-1 doesn't cover all needed characters for: "fünfte" So Iguess it must be another encoding - but which? How can I find out this? And is there any way that I can still fix all of this?

  Read the article

• Mouse for a lefty?

  - by Kyralessa

  As a programmer, I'm fairly particular about my keyboard and mouse. One thing I've only recently noticed is that the mice I tend to prefer don't work well for my five-year-old. He's left-handed, but ends up mousing with his right hand on the computer because (a) that's where the mouse is, and (b) most mice are designed for right-handed people anyway. So, a couple of questions: If you're left-handed and you mouse with your left hand, do you have any recommendations on good mice? If you have a lefty in your household (whether or not it's you), is there an easy way to swap settings between left-handed and right-handed mouse buttons? One way is Control Panel Mouse Check the box on the first tab OK. Do you know of anything faster? Or, better yet, what I'd really like is a way to reverse those settings on only one particular mouse, which would be designated as my son's mouse.

  Read the article

• Jerky animation on window open/close

  - by Jan Zich

  Today, I received and installed Windows 7, and one of the first (slightly) annoying things I noticed is a visible jerk when opening of closing new windows. When I minimize or maximize already running window, the animation is smooth from beginning to end, but when I start a new program, it seems that just at the end of the animation Windows thinks for a fraction of a second. It is a bit distracting; especially since Windows 7 seems to be overall more responsive than Windows Vista. Does anybody has the same experience? Could it, for instance, a 64bit version specific issue (just in case)? I upgraded Vidia drivers, and even though my video card is not capable running latest games, it should be able to handle this (since it was OK in Vista, and since it does not look like a video issue).

  Read the article

• CPU I/O communication part 2

  - by b-gen-jack-o-neill

  Hi, I was suggested when I have some further questions on my older ones, to create newer Question and reffer to old one. So, this is the original question: CPU I/O communication OK, I have just 2 more questions. 1, How is MMIO set? I mean, lets say I have developed some extension card with PCI interface. How do you say to memory controller to redirect desired memory space to my card´s RAM? I mean, I think standart text-mode VGA MMIO adress is 0x8000. Is this HW set (every motherboard automatically redirects 0x8000 adress to PCI-E) or its just standart and can be changed (VGA says to motherboard: give me memory mapped IO at 0x8000) 2, Can one expansion card have more MMIO connections? I mean, lets say I have card with 10 Bytes of RAM. Can Bytes 0-4 be mapped to 0x0 and bytes 5-9 to 0x5000? Please, if you know about some good article about this, please post link. Thanks.

  Read the article

• Server Performance

  - by Burt

  We have a dedicated server that we use to stage websites (our test server). The performance of the server has become really bad and we regularly have to restart it. When performance is poor I have checked task manager for the processes and memory but everything looks OK. We use a content management system and it is always when using the admin section of this CMS that we notice the performance degrade which makes me think it may have something to do with DB calls the CMS is making. Does this sound viable? Any other sggestions of how I can go about testing this? Thanks in advance...

  Read the article

• CPU fan making noise

  - by superb1

  CPU fan is making noise. I figured out some reasons: Cable coming out of fan is vibrating. And maybe also CPU fan is loose causing vibration. Suggest options. I cleaned the fan. But found that there is no heatsink compound /paste between processor and the fan. Is it OK? My processor is P4 2.4 GHz. Motherboard Intel 845 GVSR.

  Read the article

• magento on Zend Server (Win7) installation error

  - by czerasz

  I try to install magento for the first time. I've created the database with the name "project" in my C:\Zend\Apache2\conf\httpd.conf I added on the end: <Directory "C:\Zend\Apche2\htdocs\project"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> in my ZendServer/Server Setup/Extensions: PDO_MySQL, simplexml, mcrypt, hash, GD, DOM, iconv, curl, SOAP are on in C:\Zend\ZendServer\etc\php.ini I set: safe_mode = Off ;<-- was set to off ... memory_limit = 512M; Maximum amount of memory a script may consume (128MB) After step "Configuration" of magento installation (with Use Web Server (Apache) Rewrites enabled) I get: Internal Server Error My database is full of tables (that schould be ok) My Zend Server shows: 27-Oct 06:55 6 Severe Slow Request Execution (Absolute) http://localhost/project/index.php/install/wizard/installDb/ Critical Open 27-Oct 06:55 4 Fatal PHP Error C:\Zend\Apache2\htdocs\project\lib\Varien\Db\Adapter\Pdo\Mysql.php Critical Open 27-Oct 06:55 5 Slow Function Execution curl_exec Warning Open 27-Oct 06:55 5 Slow Request Execution (Absolute) http://localhost/project/index.php/install/wizard/configPost/ What can be wrong?

  Read the article

• Webkit based browsers on Mac refuse to load certain websites or resources, other browsers work fine from the same machine

  - by BergQuester

  OK, this one has really been puzzling me. Certain websites (such as instapaper.com ) or certain resources (such as the CSS and images for icanhazcheezeburger.com sites) refuse to load at all in Safari or Chrome on any of my Mac machines. Rebooting the machine doesn't fix it. If I use another browser, such as Firefox or a browser on my iPhone or in my Windows virtual machine, the pages load just fine. When the whole page errors out, Safari displays an error: "WebKit encountered an internal error" WebKitErrorDomain:300 This is all from within my home network. Any ideas what could possibly be causing such bizarre behavior?

  Read the article

• Why is DAVExplorer not connecting?

  - by C.W.Holeman II

  DAVExplorer is not connecting. Connecting to a WebDAV Server states: Once you have entered a location URL, and (if necessary) your login name and password, DAV Explorer will connect to the remote WebDAV server, and request a listing of the resources there. A hierarchical view of the sub-collections will be displayed Invoke Apache Jackrabbit $ java -jar jackrabbit-standalone-2.0.0.jar --port 8200 Welcome to Apache Jackrabbit! ------------------------------- Using repository directory jackrabbit Writing log messages to jackrabbit/log Starting the server... Apache Jackrabbit is now running at http://localhost:8200/ Use DAVExplorer $ java -jar DAVExplorer.jar Then connect to localhost:8200/repository/default/ which pops up: Login ===== Login name: [admin] Password: [admin] <OK> The pop up closes then nothing changes. Using cadaver confirms Jackrabbit is working: $ cadaver http://localhost:8200/repository/default/ Authentication required for Jackrabbit Webdav Server on server `localhost': Username: admin Password: dav:/repository/default/> ls Listing collection `/repository/default/': succeeded. Coll: com 0 Mar 13 11:07 Coll: it 0 Mar 13 11:07 Coll: net 0 Mar 13 11:07 Coll: org 0 Mar 13 11:07 Coll: za 0 Mar 13 11:07

  Read the article

• How to make use of movie events imported by imovie 09 from a DVR

  - by overboming

  I have imported about 100 clips of video from my DVR using imovie 09 and they are all saved under movie events folder, this is ok. The problem is all the movie events files are not in standard formats, they are in some 'Apple Intermediate Format' only Quicktime and iMovie recoginize and play. My problem is I simply want to give my 100 clips of video to someone using PC and this intermediate format produced by imovie is not playable or convertable by anything I have found. Now the only option for me seems to be creating a project in iMovie and drag all the clips into the project and then export these 100 clips into a single standard file, but iMovie doesn't even let me conveninent do that, I can only click at some clip, select all, drag into the project, and repeat for 100 more times, Is there a alternative way I can do so? (or use Quicktime player to convert video formats one by one). Thanks

  Read the article

• Applescript cannot find sed during application install

  - by jsmorris

  I am attempting to install an application, but the installer fails with the following error message: sh: sed: command not found and there is an Edit and OK button in the dialog, so I click the Edit button which launches the AppleScript Editor to show me the script that is executing. Running it from within the Editor doesn't work either. The first line of the script with sed is set currdir_modified to do shell script ("echo " & currdir & " | sed 's/ /\\ /g'") I went to the terminal to make sure sed was available, and it is, in /usr/bin. This sounds like a path problem, but I am not sure where to go from here. What can I do to further troubleshoot or solution this issue? I have successfully installed this app on another mac running the same OS X version, so it is specific to my mac and the application's support is not providing any more help because it is my mac's problem, not theirs.

  Read the article

• Unexpected Access Denied error while accessing EFS encrypted file

  - by pozi

  I am getting Access Denied error when I try to access some files. ACL is OK, all ACE's all intherited, I have full access to these files and I am the owner of these files. ACE's are exactly same as other files in the same directory which are accessible without problems (doublechecked through Security Tab on file properties and cacls command). Files are EFS encrypted, however I should have access to these files, because they were encrypted by the same user account I am trying to access (decrypt) them. EFS settings are exactly same as other files in the same directory which are also encrypted and accessible without problems (doublechecked through cipher command and efsdump command (SysInternals)). In ProcMon utility (SysInternals) I am getting Access Denied entry while accessing these files. Files are not used (locked), checked by Unlocker utility. Up to now, I tought I understand NTFS ACL's and EFS mechanisms fairly well, but now I am completely stuck and I do not know how to access these files. Any thoughts?

  Read the article

< Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >