Search Results

Search found 21002 results on 841 pages for 'oracle messages'.

Page 172/841 | < Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >

• Oracle Enterprise Manager Logs

  - by idea_

  Hi, I'm attempting to investigate the root cause of the following error which occurs each time a users call an Oracle 10g Forms applet: FRM-92102: A network error has occurred. The Forms Client has attempted to reestablish its connection to the Server 1 time(s) without success. Please check the network connection and try again later. Details... Java Exception: java.io.IOException: Connection failure with 503 This error remained after restarting all my system components: HTTP_Server, OC4J_BI_Forms, Web Cache, Reports Server, etc. The only way to clear this issue was to restart the server entirely. During the downtime, web pages were rendered with the PL/SQL cartridge and being served, so it appears as though this was isolated to forms. Does anybody know which log files may provide clues here? Any help would be much appreciated :) Update: If somebody can provide me with a way or reference to increase the capacity of my web server to minimize these errors, I will accept this as the solution.

  Read the article

• Cannot access or open Facebook messages [migrated]

  - by Ehsan Mamakani

  I was up to sending a very long message, about 90,000 characters, to a friend, I tried several times but I got an error sending the message. Finally, I think part of my message was sent because I could see the characters in my message list under my friend's name. When I clicked the name to see my whole message it wouldn't load the message. And now I can't access any of my messages and I get this message from Facebook: Sorry, messages are temporarily unavailable. Please try again in a few minutes. How can I get access to my messages and conversations again?

  Read the article

• Oracle tuning optimizer index cost adj and optimizer index caching

  - by Darryl Braaten

  What is the correct way to set the optimizer index cost adj parameter for Oracle. As a developer I have observed huge performance improvements as this parameter is lowered. Common queries are reduced from 2 seconds to 200ms. There are lots of warnings on the net that lowering this value will cause dire issues with the database, but no detail is given on what will start going wrong. I am currently only seeing only an upside, much improved application performance and no downside. I need to better understand the possible negative repercussions of adjusting these parameters.

  Read the article

• How to keep haproxy log messages out of /var/log/syslog

  - by itsadok

  I set up haproxy logging via rsyslogd using the tips from this article, and everything seems to be working fine. The log files get the log messages. However, every log message from haproxy also shows up at /var/log/syslog. This means that once the server goes live, the syslog will be quite useless, as it will be run over with haproxy log messages. I would like to filter out those messages from /var/log/syslog. After going over the rsyslogd documentation, I tried to change the file /etc/rsyslog.d/50-default.conf thus: *.*;auth,authpriv.none;haproxy.none -/var/log/syslog I simply added the ;haproxy.nonepart. After restarting rsyslogd it stopped working completely until I reverted my changes. What am I doing wrong?

  Read the article

• Fixed expired accounts in Oracle 11g

  - by Álvaro G. Vicario

  I have an Oracle 11g server that's used for PHP development. Recently, I had a problem logging into the Enterprise Manager due to expired passwords. I've already changed settings so passwords no longer expire and I've unlocked all users. However, the user manager shows most built-in users as expired. How can I fix that? (If I just set a password for each expired account I guess that whatever services are using it will no longer be able to log in.)

  Read the article

• Oracle account locked

  - by Priya

  Hi All, I had a user in my oracle DB with some 'x' password for sometime. Without notifying my team I changed the password to 'y'. But my team members tried to connect to the machine with the old passowrd 'x' and as the limit was set, the user account got locked. I know how to set the resource limit for the login. It would be helpful if anyone can help in finding who and all has tried to connect to the DB. As a administrator I would like to view from where the connection was from. Thanks in advance. Priya.R

  Read the article

• ICQ offline messages (do not show up)

  - by Nils Riedemann

  Hi there, I have a weird problem with offline messages: I use Adium on 2 Macs (home and office) and Beejive (iPhone) for connecting to ICQ and other protocols. When someone sends me an offline messages I expect them to show up the next time I login with any of my 3 devices. But thats not the case. Recently some show up at the office, some at home and some on my iPhone – couldnt figure out any logic behind it, seems rather random. I thought for a while that it depends on the last device i have been logged in with. But thats not the case either. A friend can send me offline Messages during the weekend, i can login with my Mac at home or iPhone, yet in some cases it only shows up when logging in from office. Weird. It really freaks me out – and no, i can't make 'em go to jabber or the like. Anyone experiencing a similar problem?

  Read the article

• Oracle 10g cannot see any data in tables

  - by MMRUSer

  Im getting this error in Oracle 10g log file 2010-11-12 16:07:41.838: [ OCROSD][3069777600]utgdv:2:ocr loc file cannot be opened 2010-11-12 16:07:41.865: [ OCROSD][3069777600]utopen:1: Couldnt find ocr,[ocrmirror] location in config file 2010-11-12 16:07:41.865: [ OCRRAW][3069777600]proprinit: Could not open raw device 2010-11-12 16:07:41.865: [ default][3069777600]a_init:7!: Backend init unsuccessful : [33] 2010-11-12 16:07:41.865: [ CSSCLNT][3069777600]clsssinit: error(33 ) in OCR initialization I was able to connect but can't generate table data form my client program. Plus it was working earlier. Im running on Redhat EL 5 Thanks.

  Read the article

• Permissions needed to read event log messages remotely?

  - by Neolisk

  When running under a limited account, local event log messages are displaying fine, for remote computer I am getting this error: The description for Event ID ( xxxxx ) in Source ( yyyyy ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: zzzzz. Same remote computer works fine under domain administrator. I am currently experimenting with just the Event Viewer, by using Run As. Original issue is a PowerShell script which does Get-EventLog. Are there any special permissions that need to be in place to able to read event log messages remotely? Supposedly there is a simple solution in Windows 2008 and higher, i.e. just add user to Event Log Readers group. Is there anything like that for Windows 2003?

  Read the article

• Encryption messages in a queue between 2 dlls.

  - by scope-creep

  Hi, I'm sending messages between 1 dll and another, effectively posting messages onto the dll input queue and receiving a messages back from the dll output queue. These two dlls are very tightly integrated. DLL 1 is a producer,and DLL2 is the consumer. I want to encrypt the messages before they are sent. What would be the best approach? Any help would be appreciated.

  Read the article

• Oracle Logical Standby redo generation

  - by DCookie

  Oracle 10.2.0.4 database with a logical standby on Win2K3. Recently a rather large delete operation was carried out on the production instance. I'm experiencing difficulty with the logical standby, in that it gets a couple of hundred (58M size) archive logs into the operation and the apply process fails with an out-of-memory error. Unfortunately, every time it fails it has to restart the apply from the beginning of the transaction. This is taking a couple of days each time. Anyway, in trying to resolve this problem, I've noticed that each archive log from the production system generates 5 or 6 log switches on the standby. I don't understand why this should be. Anyone have any ideas? A related question that I've not found the answer for: does anyone know if the logical standby must be running in archivelog mode? I really don't have a need to keep the logs.

  Read the article

• oracle virtualbox doesn't work for host Kubuntu since Lucid Lynx 10.04

  - by 13east

  I have a thinkpad edge 14 core i3 2.4 ghz and 4g ram; I have tried kubuntu 10.04, 10.10, 11.10, 12.04 and 12.10 (all x64 architecture); Both oracle and ose virtualbox only works properly to install XP and windows 7 quest system on kubuntu 10.04; For every other kubuntu release since, the guest installation goes as far as formatting the virtual drive, freezes at this step, and doesn't even go as far as copying files to hard-drive to begin installation. But virtualbox has not stopped responding to commands; I can kill that one specific window with the problem installation ("machine" - "close" - "power off the machine") and start over again without having to force-kill virtualbox application. If anyone knows how I can go about addressing this problem, any help you can provide would be very much appreciated. Thank You.

  Read the article

• Oracle application - files missing in the Mount point in UNix server

  - by arun_V

  My oracle application test instance is down, When I browse through the Unix server, I couldn’t find any files in the mount point,U01 U06 or U10, when I put BDF command it shows the following $ bdf Filesystem kbytes used avail %used Mounted on /dev/vg00/lvol3 204800 35571 158662 18% / /dev/vg00/lvol1 299157 38506 230735 14% /stand /dev/vg00/lvol8 1392640 1261068 123620 91% /var /dev/vg00/lvol7 1327104 825170 470631 64% /usr /dev/vg00/lvol4 716800 385891 310746 55% /tmp /dev/vg00/lvol6 872448 814943 53936 94% /opt /dev/vg00/lvolssh 32768 13243 18306 42% /opt/openssh /dev/vg00/lvol5 204800 187397 16334 92% /home /dev/vg00/lvolback 512000 472879 36704 93% /backup dg-ora04:/dgora03_u10 204800 167088 35416 83% /u10 dg-ora04:/dgora03_u06 204800 167088 35416 83% /u06 dg-ora04:/dgora03_u01 204800 167088 35416 83% /u01 Why can't I see any files inside the mount points?

  Read the article

• Oracle redo log performance degradation when inserting

  - by Aldarund

  I have a oracle 11g database. I'm testing in for inserts. The database running in noarchive mode. I have 3 redo log configured, each 2gb. I'm trying to insert data into test table. At begin it goes fine with 15k ins/second. I make a commit after 200 inserts. But after about 1.3m inserted records it become really slow, about 1-2k ins/second. As i noticed in resource explorer at this point we have filled all redo logs and so the inserts from this points work slow. So my question is why it become so slow when it fills redo logs, even if i commit each 200 records. And how this situation can be fixed ( except the turning off logging completely at inserts)

  Read the article

• Mutt: apply command to all tagged messages

  - by mrucci

  From the mutt manual: Once you have tagged the desired messages, you can use the tag-prefix operator, which is the ; (semicolon) key by default. When the tag-prefix operator is used, the next operation will be applied to all tagged messages if that operation can be used in that manner. But it seems that I can only execute commands that are already bound to a specific keyboard shortcut. For example I can use ;d to delete all selected messages. What if I want to apply an "unbound" command (such as purge-message)? I have also tried using something based on :exec tag-prefix or :push tag-prefix without success.

  Read the article

• Formset Messages

  - by Dave

  I want to be able to send a message using the new messages framework. Something along the lines of : ... if formset.is_valid return HttpResponseRedirect( some page ) messages.add_message(request,messages.INFO, '%i objects added') %formset.number_of_forms But two questions: Im not sure if i should put the messages before or after the render to response Is there a method akin to number_of_forms

  Read the article

• Experience with Intel X25-M 160GB and Oracle

  - by derobert

  We're considering building an Oracle database with 12 Intel X25-M G2 160GB drives in software RAID10. It'd be running Linux. Database gets some very heavy write activity during the early morning data load, other than that it is mostly read-only (and the read load is fairly minimal). We're currently running on 11 150GB Velociraptors (also Linux software RAID10), and are hoping the X25-M will speed up the data load. We currently have redo on different disks than the rest of the data. I'm wondering a few things: Any experience with using X25-M drives for databases? The X25-E are unfortunately beyond our budget. Would it hurt to separate redo off to some magnetic (non-SSD) drives, say 2 (raid1) or 4 (raid10) Seagate Constellations?

  Read the article

• Oracle backup and recovery

  - by kupa

  During recovery Oracle writes the following error: RMAN-06054: media recovery requesting unknown log: thread 1 seq 9 lowscn 4034762 I have used in mount mode this command: change archivelog all crosscheck; delete expired archivelog all; Then restore and tried to recover again:But still RMAN-06054 error.Than I wrote: run{ SET UNTIL SEQUENCE 9 THREAD 1; RESTORE DATABASE; RECOVER DATABASE; } It helped me to recover database...But after that when I do the backup and then recover the same error occurs and solution is the same... I wonder to solve this problem without SET UNTIL SEQUENCE 9 THREAD 1; maybe I should unregister this archive log from control file(I am using control file not catalog) Can you tell me how?

  Read the article

• Removing BIOS Post Messages

  - by Steve

  I am working on a project where a standard x86 desktop system will boot and run a single program until it is shut down. I would like to remove all the bios post messages so that it looks a little more "finished" and cleaner when it starts up. I was hoping that there might by a standard implementation/terms to know about so I can avoid having to dig through every manual to see if there are options, or get some advice on a standard set of tools I should be using. I was thinking about getting a board that has an image that covers up the post messages until you press a key and trying to customize it to all black, but it's not clear if this is a good direction. I started looking for OEM motherboards but my searches were filled with standard commercial stuff, or seemed to be way to big for my toy project. What is the best way to go about removing all the bios post messages and just having a blank screen or "loading" message until OS loads?

  Read the article

• again again again…. it is Oracle Open World 2012

  - by JuergenKress

  Again… again I crashed my knee during kite surfing. Again the right knee, again the outside meniscus, again the same doctor, again the same operation, again they could sew my meniscus, again the same physiotherapy… again I will miss OOW. OOW session you should not miss Oracle PartnerNetwork Exchange Middleware stream Focus on SOA and BPM Focus on BPM For OFM Partner Advisory Councils please contact [email protected] Keynotes and General sessions to attend: Thomas Kurian: Tuesday, October 2 8:45 a.m. 9:45 a.m., Moscone North, Hall D Hasan Rizvi: General session middleware: Tuesday, October 3 10:15 am 11:15 am, Moscone North, Hall D If you can’t make it to San Francisco watch the keynotes live on-demand Tips and tricks for OOW Plan your visit well in advance! Which keynotes & session do you want to attend? Demo Grounds are highly recommended and the best of OOW! Which 1:1 meetings do you want to arrange? Attend a Partner or Customer Advisory Council? Attend a Country or Community Reception? Attire during OOW: casual clothing, comfortable shoes and light luggage! Do not forget to drink water. Sign an international travel and health insurance before you leave home! What we want from you! Send your tweets: twitter.com/soacommunity @soacommunity and share your pictures at http://www.facebook.com/soacommunity SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: OOW,Oracle Open World,SOA Community,Oracle SOA,Oracle BPM,BPM,Community,OPN,Jürgen Kress

  Read the article

• again again again…. it is Oracle Open World 2012

  - by JuergenKress

  Again… again I crashed my knee during kite surfing. Again the right knee, again the outside meniscus, again the same doctor, again the same operation, again they could sew my meniscus, again the same physiotherapy… again I will miss OOW. OOW session you should not miss Oracle PartnerNetwork Exchange Middleware stream CAF Overall (WebLogic Server, Tuxedo, Coherence, Java Cloud Service, GlassFish) Oracle WebLogic Server Oracle Coherence Java Cloud Service GlassFish Traffic Director Tuxedo For OFM Partner Advisory Councils please contact [email protected] Keynotes and General sessions to attend: Thomas Kurian: Tuesday, October 2 8:45 a.m. 9:45 a.m., Moscone North, Hall D Hasan Rizvi: General session middleware: Tuesday, October 3 10:15 am 11:15 am, Moscone North, Hall D If you can’t make it to San Francisco watch the keynotes live on-demand Tips and tricks for OOW Plan your visit well in advance! Which keynotes & session do you want to attend? Demo Grounds are highly recommended and the best of OOW! Which 1:1 meetings do you want to arrange? Attend a Partner or Customer Advisory Council? Attend a Country or Community Reception? Attire during OOW: casual clothing, comfortable shoes and light luggage! Do not forget to drink water. Sign an international travel and health insurance before you leave home! What we want from you! Send your tweets: http://twitter.com/wlscommunity and @wlscommnity share your pictures at http://www.facebook.com/WebLogicCommunity WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Oracle Open World,OOW,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Floating Panels and Describe Windows in Oracle SQL Developer

  - by thatjeffsmith

  One of the challenges I face as I try to share tips about our software is that I tend to assume there are features that you just ‘know about.’ Either they’re so intuitive that you MUST know about them, or it’s a feature that I’ve been using for so long I forget that others may have never even seen it before. I want to cover two of those today - Describe (DESC) – SHIFT+F4 Floating Panels My super-exciting desktop SQL Developer and Describe DESC or Describe is an Oracle SQL*Plus command. It shows what a table or view is composed of in terms of it’s column definition. Here’s an example: SQL*Plus: Release 11.2.0.3.0 Production on Fri Sep 21 14:25:37 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - Production With the Partitioning, OLAP, Data Mining and Real Application Testing options SQL> desc beer; Name Null? Type ----------------------------------------- -------- ---------------------------- BREWERY NOT NULL VARCHAR2(100) CITY VARCHAR2(100) STATE VARCHAR2(100) COUNTRY VARCHAR2(100) ID NUMBER SQL> You can get the same information – and a good bit more – in SQL Developer using the SQL Developer DESC command. You invoke it with SHIFT+F4. It will open a floating (non-modal!) window with the information you want. Here’s an example: I can see my column definitions, constratins, stats, privs, etc A few ‘cool’ things you should be aware of: I can open as many as I want, and still work in my worksheet, browser, etc. I can also DESC an index, user, or most any other database object I can of course move them off my primary desktop display The DESC panel’s are read-only. I can’t drop a constraint from within the DESC window of a given table. But for dragging columns into my worksheet, and checking out the stats for my objects as I query them – it’s very, very handy. Try This Right Now Type ‘scott.emp’ (or some other table you have), place your cursor on the text, and hit SHIFT+F4. You’ll see the EMP object open. Now click into a column name in the columns page. Drag it into your worksheet. It will paste that column name into your query. This is an alternative for those that don’t like our code insight feature or dragging columns off the connection tree (new for v3.2!) Got it? SQL Developer’s Floating Panels Ok, let’s talk about a similar feature. Did you know that any dockable panel from the View menu can also be ‘floated?’ One of my favorite features is the SQL History. Every query I run is recorded, and I can recall them later without having to remember what I ran and when. And I USUALLY use the keyboard shortcuts for this. Let your trouble float away…if only it were so easy as a right-click in the real world. But sometimes I still want to see my recall list without having to give up my screen real estate. So I just mouse-right click on the panel tab and select ‘Float.’ Then I move it over to my secondary display – see the poorly lit picture in the beginning of this post. And that’s it. Simple, I know. But I thought you should know about these two things!

  Read the article

• Have you registered? Oracle 'In Touch' PartnerCast: Be prepared for a year of growth

  - by Julien Haye

  Hi there Oracle Partners, We hope you’ve seen our recent blog post regarding the next Oracle ‘In Touch’ PartnerCast? Hosted by David Callaghan, Senior Vice President EMEA Alliances and Channels, to be broadcast on Tuesday 1st July 2014 from 10:30am UK/11:30am CET. David and his studio guests will be discussing the latest news from Oracle; including highlights of FY14, Strategic themes for FY15 and SaaS. We will also have an exclusive for ‘In Touch’ whereby David interviews Senior Vice President, Global Alliances & Channels, Rich Geraffo, on what the FY15 Oracle Global Partner Kick Off means for EMEA Oracle Partners. Also, David provides your chance to hear from some of the newly appointed Oracle Worldwide A&C Leadership Team. Got a question for David and his guests? Get in touch on Twitter using the hashtag #OracleInTouch or by emailing [email protected] to get your questions featured in the cast! To find out more information and to watch previous episodes on-demand, please visit our webpage here. We hope you can make it! Oracle EMEA Alliances & Channels

  Read the article

• Venez nous voir au Forum Oracle Big Data le 5 avril !

  - by Kinoa

  Le Big Data vient de plus en plus souvent au devant de la scène et vous souhaitez en apprendre davantage ? Générés à partir des réseaux sociaux, de capteurs numériques et autres équipements mobiles, les Big Data - autrement dits, d'énormes volumes de données - constituent une mine d'informations précieuses sur vos activités et les comportements de vos clients. Votre challenge aujourd’hui consiste à gérer l’acquisition, l’organisation et la compréhension de ces volumes de données non structurées, et à les intégrer dans votre système d’information. Vous avez des questions ? Ca vous parait complexe ? Alors le Forum Oracle Bid Data organisé par Oracle et Intel est fait pour vous !   Nous aborderons plusieurs points : Accélération du déploiement de Big Data par l'approche intégrée du hardware et du software Mise à disposition de tous les outils nécessaires au processus complet, de l'acquisition des données à la restitution Intégration de Big Data dans votre système d'information pour fournir aux utilisateurs la quintessence de l'information Nous vous avons concocté un programme des plus alléchant pour cette journée du 5 avril : 9h00 Accueil et remise des badges 9h30 Big Data : The Industry View. Are you ready ?Johan Hendrickx, Core Technology Director, Oracle EMEA Keynote : Big Data – Are you ready ? George Lumpkin, Vice President of DW Product Management, Oracle Corporation Acquisition des données dans votre Big Dataavec Hadoop et Oracle NoSQL Pause Organisez et structurez l'information au sein de votre Big Data avec Big Data Connectors et Oracle Data Integrator Tirez parti des analyses des données de votre Big Dataavec Oracle Endeca et Oracle Business Intelligence 13h00 Cocktail déjeunatoire Le nombre de places est limité, pensez à vous inscrire dès maintenant. Lieu :  Maison de la Chimie28 B, rue Saint Dominique 75007 Paris

  Read the article

• &ldquo;Why do transactional messages all have the same priority?&rdquo;

  - by John Breakwell

  I answered this question on the MSMQ forum on MSDN and thought it worth sharing here. The poster wanted to know why all transactional messages have a fixed priority of zero (instead of 0 through 7). They wanted the guaranteed delivery of messages to a queue but wanted to assign different levels of priority. Some aspects of MSMQ were defined way back in the last century and this is one of them. If I remember right, the reason was to avoid the following scenario: You have a single transaction of 3 messages (a, b and c) with priorities 5, 3 and 4 respectively. The messages are sent in order a,b,c The messages arrive in the queue and are arranged in order a,c,b to reflect priority order This breaks the guaranteed order part of the transaction.  I know that very few people send more than one message in a transaction but that is a scenario that MSMQ has to be able to handle; for the majority, including yourself, this scenario is irrelevant which is why you are surprised by the absence of transactional priorities. The options, therefore, available to the Microsoft developers were to: Implement code that allowed you to send messages with variable priority as long as any messages within the same transaction were the same priority, or Define a set priority for all transactional messages As you can understand, option 1 would be a complicated arrangement with all the necessary enforcement, error handling, user education and documentation, etc. Sure, it would have been possible to implement option 1 but I expect the product group decided to invest the development time in some other aspect of MSMQ. Now, with five versions out there, it would be confusing to change how the product operates, in addition to potentially breaking exisiting systems that have been working fine for years. So, balancing cost and risk against customer demand, I would not expect this feature to ever change.

  Read the article

< Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >