Search Results

Search found 4762 results on 191 pages for 'ref cursor'.

Page 172/191 | < Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >

  • SQLAuthority News – Storing Data and Files in Cloud – Dropbox – Personal Technology Tip

    - by pinaldave
    I thought long and hard about doing a Personal Technology Tips series for this blog.  I have so many tips I’d like to share.  I am on my computer almost all day, every day, so I have a treasure trove of interesting tidbits I like to share if given the chance.  The only thing holding me back – which tip to share first?  The first tip obviously has the weight of seeming like the most important.  But this would mean choosing amongst my favorite tricks and shortcuts.  This is a hard task. Source: Dropbox.com My Dropbox I have finally decided, though, and have determined that the first Personal Technology Tip may not be the most secret or even trickier to master – in fact, it is probably the easiest.  My today’s Personal Technology Tip is Dropbox. I hope that all of you are nodding along in recognition right now.  If you do not use Dropbox, or have not even heard of it before, get on the internet and find their site.  You won’t be disappointed.  A quick recap for those in the dark: Dropbox is an online storage site with a lot of additional syncing and cloud-computing capabilities.  Now that we’ve covered the basics, let’s explore some of my favorite options in Dropbox. Collaborate with All The first thing I love about Dropbox is the ability it gives you to collaborate with others.  You can share files easily with other Dropbox users, and they can alter them, share them with you, all while keeping track of different versions in on easy place.  I’d like to see anyone try to accomplish that key idea – “easily” – using e-mail versions and multiple computers.  It’s even difficult to accomplish using a shared network. Afraid that this kind of ease looks too good to be true?  Afraid that maybe there isn’t enough storage space, or the user interface is confusing?  Think again.  There is plenty of space – you can get 2 GB with just a free account, and upgrades are inexpensive and go up to 100 GB of storage.  And the user interface is so easy that anyone can learn to use it. What I use Dropbox for I love Dropbox because I give a lot of presentations and often they are far from home.  I can keep my presentations on Dropbox and have easy access to them anywhere, without needing to have my whole computer with me.  This is just one small way that you can use Dropbox. You can sync your entire hard drive, or hard drives if you have multiple computers (home, work, office, shared), and you can set Dropbox to automatically sync files on a certain timeline, or whenever Dropbox notices that they’ve been changed. Why I love Dropbox Dropbox has plenty of storage, but 2 GB still has a hard time competing with the average desktop’s storage space.  So what if you want to sync most of your files, but only the ones you use the most and share between work and home, and not all your files (especially large files like pictures and videos)?  You can use selective sync to choose which files to sync. Above all, my favorite feature is LanSync.  Dropbox will search your Local Area Network (LAN) for new files and sync them to Dropbox, as well as downloading the new version to all the shared files across the network.  That means that if move around on different computers at work or at home, you will have the same version of the file every time.  Or, other users on the LAN will have access to the new version, which makes collaboration extremely easy. Ref: rzfeeser.com Dropbox has so many other features that I feel like I could create a Personal Technology Tips series devoted entirely to Dropbox.  I’m going to create a bullet list here to make things shorter, but I strongly encourage you to look further into these into options if it sounds like something you would use. Theft Recover Home Security File Hosting and Sharing Portable Dropbox Sync your iCal calendar Password Storage What is your favorite tool and why? I could go on and on, but I will end here.  In summary – I strongly encourage everyone to investigate Dropbox to see if it’s something they would find useful.  If you use Dropbox and know of a great feature I failed to mention, please share it with me, I’d love to hear how everyone uses this program. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Personal Technology

    Read the article

  • C# 4.0: Covariance And Contravariance In Generics

    - by Paulo Morgado
    C# 4.0 (and .NET 4.0) introduced covariance and contravariance to generic interfaces and delegates. But what is this variance thing? According to Wikipedia, in multilinear algebra and tensor analysis, covariance and contravariance describe how the quantitative description of certain geometrical or physical entities changes when passing from one coordinate system to another.(*) But what does this have to do with C# or .NET? In type theory, a the type T is greater (>) than type S if S is a subtype (derives from) T, which means that there is a quantitative description for types in a type hierarchy. So, how does covariance and contravariance apply to C# (and .NET) generic types? In C# (and .NET), variance applies to generic type parameters and not to the resulting generic type. A generic type parameter is: covariant if the ordering of the generic types follows the ordering of the generic type parameters: Generic<T> = Generic<S> for T = S. contravariant if the ordering of the generic types is reversed from the ordering of the generic type parameters: Generic<T> = Generic<S> for T = S. invariant if neither of the above apply. If this definition is applied to arrays, we can see that arrays have always been covariant because this is valid code: object[] objectArray = new string[] { "string 1", "string 2" }; objectArray[0] = "string 3"; objectArray[1] = new object(); However, when we try to run this code, the second assignment will throw an ArrayTypeMismatchException. Although the compiler was fooled into thinking this was valid code because an object is being assigned to an element of an array of object, at run time, there is always a type check to guarantee that the runtime type of the definition of the elements of the array is greater or equal to the instance being assigned to the element. In the above example, because the runtime type of the array is array of string, the first assignment of array elements is valid because string = string and the second is invalid because string = object. This leads to the conclusion that, although arrays have always been covariant, they are not safely covariant – code that compiles is not guaranteed to run without errors. In C#, the way to define that a generic type parameter as covariant is using the out generic modifier: public interface IEnumerable<out T> { IEnumerator<T> GetEnumerator(); } public interface IEnumerator<out T> { T Current { get; } bool MoveNext(); } Notice the convenient use the pre-existing out keyword. Besides the benefit of not having to remember a new hypothetic covariant keyword, out is easier to remember because it defines that the generic type parameter can only appear in output positions — read-only properties and method return values. In a similar way, the way to define a type parameter as contravariant is using the in generic modifier: public interface IComparer<in T> { int Compare(T x, T y); } Once again, the use of the pre-existing in keyword makes it easier to remember that the generic type parameter can only be used in input positions — write-only properties and method non ref and non out parameters. Because covariance and contravariance apply only to the generic type parameters, a generic type definition can have both covariant and contravariant generic type parameters in its definition: public delegate TResult Func<in T, out TResult>(T arg); A generic type parameter that is not marked covariant (out) or contravariant (in) is invariant. All the types in the .NET Framework where variance could be applied to its generic type parameters have been modified to take advantage of this new feature. In summary, the rules for variance in C# (and .NET) are: Variance in type parameters are restricted to generic interface and generic delegate types. A generic interface or generic delegate type can have both covariant and contravariant type parameters. Variance applies only to reference types; if you specify a value type for a variant type parameter, that type parameter is invariant for the resulting constructed type. Variance does not apply to delegate combination. That is, given two delegates of types Action<Derived> and Action<Base>, you cannot combine the second delegate with the first although the result would be type safe. Variance allows the second delegate to be assigned to a variable of type Action<Derived>, but delegates can combine only if their types match exactly. If you want to learn more about variance in C# (and .NET), you can always read: Covariance and Contravariance in Generics — MSDN Library Exact rules for variance validity — Eric Lippert Events get a little overhaul in C# 4, Afterward: Effective Events — Chris Burrows Note: Because variance is a feature of .NET 4.0 and not only of C# 4.0, all this also applies to Visual Basic 10.

    Read the article

  • Oracle’s Web Experience Management

    - by Christie Flanagan
    Today’s guest post on Oracle’s Web Experience Management comes from a member of our WebCenter Evangelist team, Noël Jaffré, a Principal Technologist based in France.Oracle’s Web Experience Management (WEM) solution enables organizations to optimize the online channel for driving marketing and customer experience management success. It empowers business users to manage the web presence and create rich and engaging online experiences for customers and prospects. Oracle's WEM platform provides a framework to simplify the integration of Oracle, third-party and custom-built applications. This framework essentially allows the creation and integration of applications using one single business interface called the WEM interface. It includes the following: Single sign-on access control for all integrated applications using the Central Authentication Service (CAS) component. A single centralized administration window for user, role, and native applications management including site management. Community server management, gadget server management as well as management for partner integrated technologies. A Representational State Transfer (REST) API for accessing WebCenter Sites data. REST services are supported on both Oracle WebCenter Sites and Oracle WebCenter Sites Satellite Server to leverage the satellite server cache. All REST requests are cached for web consuming applications as well for the high performance delivery of native applications on the mobile channel. Oracle WebCenter Sites’ Web Experience Management environment enables organizations to deliver a compelling online experience to customers by simplifying the deployment and management of sophisticated and engaging websites. The WebCenter Sites platform automates the entire process of managing web content including: Authoring:  Business users can easily contribute and manage web content in real-time, with intuitive interfaces and drag-and-drop content authoring and layout capabilities designed for the non-technical user. Contextual Content Targeting: Marketers are empowered to create and manage targeted campaigns with relevant recommendations and promotions based on the context of the session of the visitor such as his or her navigation history, user profile, language, location or other information shared during the visitor session. Content Publishing and Deployment: It offers advanced multi-site management capabilities for departmental or regional sites, as well as strong multi-lingual and multi-locale content management. The remote satellite server caching infrastructure provides high-performance, distributed caching, tuned to deliver high-volume, targeted and multi-lingual sites. Analytics and Optimization: Business users and marketers have the ability to measure the effectiveness of their online content and campaigns at a granular level. Editors and marketers can immediately determine whether a given article or promotion is relevant to a particular customer segment. User-generated Content: Marketers can enable blogs, comments, rating and reviews on the website.  All comments and reviews posted to the website can be moderated from the administrator interface either manually or automatically using filters, whitelists, blacklists or community based moderation. Personalized Gadget Dashboards:  Site managers can deploy gadgets, small applications using web content, individually or as part of dashboards containing multiple gadgets.  These gadget dashboards enable site visitors to create their own “MyPage” on a given site where they can select and customize the gadgets that the site administrator has made available.  Any gadget that conforms to the iGoogle/OpenSocial standard can be made available to site visitors, or they can be created within the WEM interface. Oracle's WEM platform also provides a unique environment for the delivery of a rich, multichannel online experience for site visitors through its advanced management modules for mobile. With Oracle’s WEM solution, it’s easy to control branding and deliver a consistent message while repurposing web content for publication to mobile devices, kiosks and much more. This distinctive approach provides: HTML5 Delivery: HTML5 delivery which includes native support for adaptive design that responds to the user’s computer screen resolution and orientation. The approach is less driven by the particular hardware and more driven by the user’s interactions with the device. In other words, this approach takes both the screen interactions (either cursor or touch) and screen sizes and orientation into consideration. A Unique Native Mobile Extension Environment for Contributors: From the WEM interface, a contributor can directly manage their mobile channel, using the tooling already in place for driving the traditional web presence. This includes the mobile presentation, as well as mobile insite editing, drag and drop page layout, and in-context recommendations and personalization. Optimized REST APIs for High Performance Content Delivery on Native Mobile Device Applications: WebCenter Sites’ REST API uses the underlying HTTP methods (GET, POST, PUT, DELETE) to interact with resources. Resources support two types of input and output formats -- XML and JSON. REST calls are customizable to optimize the interactions between the content repositories and the client applications. Caching is essential to decrease network loads and improve overall reliability and usability of the applications and user interactions. REST results are cached through the highly efficient Oracle WebCenter Sites caching architecture.

    Read the article

  • org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'transactionManager

    - by BilalFromParis
    when I add the code into my spring configuration file beans-hibernate.xml <bean id="transactionManager" class="org.springframework.orm.hibernate3.HibernateTransactionManager"> <property name="sessionFactory" ref="sessionFactory" /> </bean> It doesn't work and I don't know why, can someone help me please ? My Dao Class is : public class CourseDaoImpl implements CourseDao { private SessionFactory sessionFactory; public void setSessionFactory(SessionFactory sessionFactory) { this.sessionFactory = sessionFactory; } @Transactional public void store(Course course) { sessionFactory.getCurrentSession().saveOrUpdate(course); } @Transactional public void delete(Long courseId) { Course course = (Course)sessionFactory.getCurrentSession().get(Course.class, courseId); sessionFactory.getCurrentSession().delete(course); } @Transactional(readOnly=true) public Course findById(Long courseId) { return (Course)sessionFactory.getCurrentSession().get(Course.class, courseId); } @Transactional public List<Course> findAll() { Query query = sessionFactory.getCurrentSession().createQuery("FROM Course"); return (List<Course>)query.list(); } } but : juil. 04, 2012 3:38:18 AM org.springframework.context.support.AbstractApplicationContext prepareRefresh Infos: Refreshing org.springframework.context.support.ClassPathXmlApplicationContext@6ba8fb1b: startup date [Wed Jul 04 03:38:18 CEST 2012]; root of context hierarchy juil. 04, 2012 3:38:18 AM org.springframework.beans.factory.xml.XmlBeanDefinitionReader loadBeanDefinitions Infos: Loading XML bean definitions from class path resource [beans-hibernate.xml] juil. 04, 2012 3:38:19 AM org.springframework.beans.factory.support.DefaultListableBeanFactory preInstantiateSingletons Infos: Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@5a7fed46: defining beans [org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.annotation.AnnotationTransactionAttributeSource#0,org.springframework.transaction.interceptor.TransactionInterceptor#0,org.springframework.transaction.config.internalTransactionAdvisor,sessionFactory,transactionManager,courseDao]; root of factory hierarchy juil. 04, 2012 3:38:19 AM org.hibernate.annotations.common.Version INFO: HCANN000001: Hibernate Commons Annotations {4.0.1.Final} juil. 04, 2012 3:38:19 AM org.hibernate.Version logVersion INFO: HHH000412: Hibernate Core {4.1.3.Final} juil. 04, 2012 3:38:19 AM org.hibernate.cfg.Environment INFO: HHH000206: hibernate.properties not found juil. 04, 2012 3:38:19 AM org.hibernate.cfg.Environment buildBytecodeProvider INFO: HHH000021: Bytecode provider name : javassist juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl configure INFO: HHH000402: Using Hibernate built-in connection pool (not for production use!) juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl configure INFO: HHH000115: Hibernate connection pool size: 20 juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl configure INFO: HHH000006: Autocommit mode: false juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl configure INFO: HHH000401: using driver [org.hibernate.dialect.PostgreSQLDialect] at URL [jdbc:postgresql://localhost:5432/spring] juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl configure INFO: HHH000046: Connection properties: {user=Bilal, password=**} juil. 04, 2012 3:38:19 AM org.hibernate.dialect.Dialect INFO: HHH000400: Using dialect: org.hibernate.dialect.PostgreSQLDialect juil. 04, 2012 3:38:19 AM org.hibernate.engine.jdbc.internal.LobCreatorBuilder useContextualLobCreation INFO: HHH000423: Disabling contextual LOB creation as JDBC driver reported JDBC version [3] less than 4 juil. 04, 2012 3:38:19 AM org.hibernate.engine.transaction.internal.TransactionFactoryInitiator initiateService INFO: HHH000399: Using default transaction strategy (direct JDBC transactions) juil. 04, 2012 3:38:19 AM org.hibernate.hql.internal.ast.ASTQueryTranslatorFactory INFO: HHH000397: Using ASTQueryTranslatorFactory juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.SchemaUpdate execute INFO: HHH000228: Running hbm2ddl schema update juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.SchemaUpdate execute INFO: HHH000102: Fetching database metadata juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.SchemaUpdate execute INFO: HHH000396: Updating schema juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.TableMetadata INFO: HHH000261: Table found: public.course juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.TableMetadata INFO: HHH000037: Columns: [fee, id, title, end_date, begin_date] juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.TableMetadata INFO: HHH000108: Foreign keys: [] juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.TableMetadata INFO: HHH000126: Indexes: [course_pkey] juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.SchemaUpdate execute INFO: HHH000232: Schema update complete juil. 04, 2012 3:38:19 AM org.springframework.beans.factory.support.DefaultSingletonBeanRegistry destroySingletons Infos: Destroying singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@5a7fed46: defining beans [org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.annotation.AnnotationTransactionAttributeSource#0,org.springframework.transaction.interceptor.TransactionInterceptor#0,org.springframework.transaction.config.internalTransactionAdvisor,sessionFactory,transactionManager,courseDao]; root of factory hierarchy juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl stop INFO: HHH000030: Cleaning up connection pool [jdbc:postgresql://localhost:5432/spring] Exception in thread "main" org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'transactionManager' defined in class path resource [beans-hibernate.xml]: Invocation of init method failed; nested exception is java.lang.NoClassDefFoundError: org/hibernate/engine/SessionFactoryImplementor at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1455) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:294) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:225) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:291) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:193) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:585) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:913) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:464) at org.springframework.context.support.ClassPathXmlApplicationContext.(ClassPathXmlApplicationContext.java:139) at org.springframework.context.support.ClassPathXmlApplicationContext.(ClassPathXmlApplicationContext.java:83) at com.boutaya.bill.main.Main.main(Main.java:14) Caused by: java.lang.NoClassDefFoundError: org/hibernate/engine/SessionFactoryImplementor at org.springframework.orm.hibernate3.SessionFactoryUtils.getDataSource(SessionFactoryUtils.java:123) at org.springframework.orm.hibernate3.HibernateTransactionManager.afterPropertiesSet(HibernateTransactionManager.java:411) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1514) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1452) ... 12 more Caused by: java.lang.ClassNotFoundException: org.hibernate.engine.SessionFactoryImplementor at java.net.URLClassLoader$1.run(Unknown Source) at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) ... 16 more I think the problem is when I use the Class : org.springframework.orm.hibernate3.HibernateTransactionManager ???

    Read the article

  • Code Structure / Level Design: Plants vs Zombies game level dissection

    - by lalan
    Hi Friends, I am interested in learning the class structure of Plants vs Zombies, particularly level design; for those who haven't played it - this video contains nice play-through: http://www.youtube.com/watch?v=89DfdOIJ4xw. How would I go ahead and design the code, mostly structure & classes, which allows for maximum flexibility & clean development? I am familiar with data driven design concepts, and would use events to handle most of dynamic behavior. Dissection at macro level: (Once every Level) Load tilemap, props, etc -- basically build the map (Once every Level) Camera Movement - might consider it as short cut-scene (Once every Level) Show Enemies you'll face during present level (Once every Level) Unit Selection Window/Panel - selection of defensive plants (Once every Level) Camera Movement - might consider it as short cut-scene (Once every Level) HUD Creation - based on unit selection (Level Loop) Enemy creation - based on types of zombies allowed (Level Loop) Sun/Resource generation (Level Loop) Show messages like 'huge wave of zombies coming', 'final wave' (Level Loop) Other unique events - Spawn gifts, money, tombstones, etc (Once every Level) Unlock new plant Potential game scripts: a) Level definitions: Level_1_1.xml, Level_1_2.xml, etc. Level_1_1.xml :: Sample script <map> <tilemap>tilemapFrontLawn</tilemap> <SpawnPoints> tiles where particular type of zombies (land vs water) may spawn</spawnPoints> <props> position, entity array -- lawnmower, </props> </map> <zombies> <... list of zombies who gonna attack by ids...> </zombies> <plants> <... list by plants which are available for defense by ids...> </plants> <progression> <ZombieWave name='first wave' spawnScript='zombieLightWave.lua' unlock='null'> <startMessages time=1.5>Ready</startMessages> <endMessages time=1.5>Huge wave of zombies incoming</endMessages> </ZombieWave> </progression> b) Entities definitions: .xmls containing zombies, plants, sun, lawnmower, coins, etc description. Potential classes: //LevelManager - Based on the level under play, it will load level script. Few of the // functions it may have: class LevelManager { public: bool load(string levelFileName); bool enter(); bool update(float deltatime); bool exit(); private: LevelData* mLevelData; } // LevelData - Contains the details of level loaded by LevelManager. class LevelData { private: string file; // array of camera,dialog,attackwaves, etc in active level LevelCutSceneCamera** mArrayCutSceneCamera; LevelCutSceneDialog** mArrayCutSceneDialog; LevelAttackWave** mArrayAttackWave; .... // which camera,dialog,attackwave is active in level uint mCursorCutSceneCamera; uint mCursorCutSceneDialog; uint mCursorAttackWave; public: // based on cursor, get the next camera,dialog,attackwave,etc in active level // return false/true based on failure/success bool nextCutSceneCamera(LevelCutSceneCamera**); bool nextCutSceneDialog(LevelCutSceneDialog**); } // LevelUnderPlay- LevelManager class LevelUnderPlay { private: LevelCutSceneCamera* mCutSceneCamera; LevelCutSceneDialog* mCutSceneDialog; LevelAttackWave* mAttackWave; Entities** mSelectedPlants; Entities** mAllowedZombies; bool isCutSceneCameraActive; public: bool enter(); bool update(float deltatime); bool exit(); } I am totally confused.. :( Does it make sense of using class composition (have flat class hierarchy) for managing levels. Is it a good idea to just add/remove/update sprites (or any drawable stuff) to current scene from LevelManager or LevelUnderPlay? If I want to make non-linear level design, how should I go ahead? Perhaps I would need a LevelProgression class, which would decide what to do based on decision tree. Any suggestions would be appreciated very much. Thank for your time, lalan

    Read the article

  • Aggregating cache data from OCEP in CQL

    - by Manju James
    There are several use cases where OCEP applications need to join stream data with external data, such as data available in a Coherence cache. OCEP’s streaming language, CQL, supports simple cache-key based joins of stream data with data in Coherence (more complex queries will be supported in a future release). However, there are instances where you may need to aggregate the data in Coherence based on input data from a stream. This blog describes a sample that does just that. For our sample, we will use a simplified credit card fraud detection use case. The input to this sample application is a stream of credit card transaction data. The input stream contains information like the credit card ID, transaction time and transaction amount. The purpose of this application is to detect suspicious transactions and send out a warning event. For the sake of simplicity, we will assume that all transactions with amounts greater than $1000 are suspicious. The transaction history is available in a Coherence distributed cache. For every suspicious transaction detected, a warning event must be sent with maximum amount, total amount and total number of transactions over the past 30 days, as shown in the diagram below. Application Input Stream input to the EPN contains events of type CCTransactionEvent. This input has to be joined with the cache with all credit card transactions. The cache is configured in the EPN as shown below: <wlevs:caching-system id="CohCacheSystem" provider="coherence"/> <wlevs:cache id="CCTransactionsCache" value-type="CCTransactionEvent" key-properties="cardID, transactionTime" caching-system="CohCacheSystem"> </wlevs:cache> Application Output The output that must be produced by the application is a fraud warning event. This event is configured in the spring file as shown below. Source for cardHistory property can be seen here. <wlevs:event-type type-name="FraudWarningEvent"> <wlevs:properties type="tuple"> <wlevs:property name="cardID" type="CHAR"/> <wlevs:property name="transactionTime" type="BIGINT"/> <wlevs:property name="transactionAmount" type="DOUBLE"/> <wlevs:property name="cardHistory" type="OBJECT"/> </wlevs:properties </wlevs:event-type> Cache Data Aggregation using Java Cartridge In the output warning event, cardHistory property contains data from the cache aggregated over the past 30 days. To get this information, we use a java cartridge method. This method uses Coherence’s query API on credit card transactions cache to get the required information. Therefore, the java cartridge method requires a reference to the cache. This may be set up by configuring it in the spring context file as shown below: <bean class="com.oracle.cep.ccfraud.CCTransactionsAggregator"> <property name="cache" ref="CCTransactionsCache"/> </bean> This is used by the java class to set a static property: public void setCache(Map cache) { s_cache = (NamedCache) cache; } The code snippet below shows how the total of all the transaction amounts in the past 30 days is computed. Rest of the information required by CardHistory object is calculated in a similar manner. Complete source of this class can be found here. To find out more information about using Coherence's API to query a cache, please refer Coherence Developer’s Guide. public static CreditHistoryData(String cardID) { … Filter filter = QueryHelper.createFilter("cardID = :cardID and transactionTime :transactionTime", map); CardHistoryData history = new CardHistoryData(); Double sum = (Double) s_cache.aggregate(filter, new DoubleSum("getTransactionAmount")); history.setTotalAmount(sum); … return history; } The java cartridge method is used from CQL as seen below: select cardID, transactionTime, transactionAmount, CCTransactionsAggregator.execute(cardID) as cardHistory from inputChannel where transactionAmount1000 This produces a warning event, with history data, for every credit card transaction over $1000. That is all there is to it. The complete source for the sample application, along with the configuration files, is available here. In the sample, I use a simple java bean to load the cache with initial transaction history data. An input adapter is used to create and send transaction events for the input stream.

    Read the article

  • Cross-language Extension Method Calling

    - by Tom Hines
    Extension methods are a concise way of binding functions to particular types. In my last post, I showed how Extension methods can be created in the .NET 2.0 environment. In this post, I discuss calling the extensions from other languages. Most of the differences I find between the Dot Net languages are mainly syntax.  The declaration of Extensions is no exception.  There is, however, a distinct difference with the framework accepting excensions made with C++ that differs from C# and VB.  When calling the C++ extension from C#, the compiler will SOMETIMES say there is no definition for DoCPP with the error: 'string' does not contain a definition for 'DoCPP' and no extension method 'DoCPP' accepting a first argument of type 'string' could be found (are you missing a using directive or an assembly reference?) If I recompile, the error goes away. The strangest problem with calling the C++ extension from C# is that I first must make SOME type of reference to the class BEFORE using the extension or it will not be recognized at all.  So, if I first call the DoCPP() as a static method, the extension works fine later.  If I make a dummy instantiation of the class, it works.  If I have no forward reference of the class, I get the same error as before and recompiling does not fix it.  It seems as if this none of this is supposed to work across the languages. I have made a few work-arounds to get the examples to compile and run. Note the following examples: Extension in C# using System; namespace Extension_CS {    public static class CExtension_CS    {  //in C#, the "this" keyword is the key.       public static void DoCS(this string str)       {          Console.WriteLine("CS\t{0:G}\tCS", str);       }    } } Extension in C++ /****************************************************************************\  * Here is the C++ implementation.  It is the least elegant and most quirky,  * but it works. \****************************************************************************/ #pragma once using namespace System; using namespace System::Runtime::CompilerServices;     //<-Essential // Reference: System.Core.dll //<- Essential namespace Extension_CPP {        public ref class CExtension_CPP        {        public:               [Extension] // or [ExtensionAttribute] /* either works */               static void DoCPP(String^ str)               {                      Console::WriteLine("C++\t{0:G}\tC++", str);               }        }; } Extension in VB ' Here is the VB implementation.  This is not as elegant as the C#, but it's ' functional. Imports System.Runtime.CompilerServices ' Public Module modExtension_VB 'Extension methods can be defined only in modules.    <Extension()> _       Public Sub DoVB(ByVal str As String)       Console.WriteLine("VB" & Chr(9) & "{0:G}" & Chr(9) & "VB", str)    End Sub End Module   Calling program in C# /******************************************************************************\  * Main calling program  * Intellisense and VS2008 complain about the CPP implementation, but with a  * little duct-tape, it works just fine. \******************************************************************************/ using System; using Extension_CPP; using Extension_CS; using Extension_VB; // vitual namespace namespace TestExtensions {    public static class CTestExtensions    {       /**********************************************************************\        * For some reason, this needs a direct reference into the C++ version        * even though it does nothing than add a null reference.        * The constructor provides the fake usage to please the compiler.       \**********************************************************************/       private static CExtension_CPP x = null;   // <-DUCT_TAPE!       static CTestExtensions()       {          // Fake usage to stop compiler from complaining          if (null != x) {} // <-DUCT_TAPE       }       static void Main(string[] args)       {          string strData = "from C#";          strData.DoCPP();          strData.DoCS();          strData.DoVB();       }    } }   Calling program in VB  Imports Extension_CPP Imports Extension_CS Imports Extension_VB Imports System.Runtime.CompilerServices Module TestExtensions_VB    <Extension()> _       Public Sub DoCPP(ByVal str As String)       'Framework does not treat this as an extension, so use the static       CExtension_CPP.DoCPP(str)    End Sub    Sub Main()       Dim strData As String = "from VB"       strData.DoCS()       strData.DoVB()       strData.DoCPP() 'fake    End Sub End Module  Calling program in C++ // TestExtensions_CPP.cpp : main project file. #include "stdafx.h" using namespace System; using namespace Extension_CPP; using namespace Extension_CS; using namespace Extension_VB; void main(void) {        /*******************************************************\         * Extension methods are called like static methods         * when called from C++.  There may be a difference in         * syntax when calling the VB extension as VB Extensions         * are embedded in Modules instead of classes        \*******************************************************/     String^ strData = "from C++";     CExtension_CPP::DoCPP(strData);     CExtension_CS::DoCS(strData);     modExtension_VB::DoVB(strData); //since Extensions go in Modules }

    Read the article

  • View Docs and PDFs Directly in Google Chrome

    - by Matthew Guay
    Would you like to view documents, presentations, and PDFs directly in Google Chrome?  Here’s a handy extension that makes Google Docs your default online viewer so don’t have to download the file first. Getting Started By default, when you come across a PDF or other common document file online in Google Chrome, you’ll have to download the file and open it in a separate application. It’d be much easier to simply view online documents directly in Chrome.  To do this, head over to the Docs PDF/PowerPoint Viewer page on the Chrome Extensions site (link below), and click Install to add it to your browser. Click Install to confirm that you want to install this extension. Extensions don’t run by default in Incognito mode, so if you’d like to always view documents directly in Chrome, open the Extensions page and check Allow this extension to run in incognito. Now, when you click a link for a document online, such as a .docx file from Word, it will open in the Google Docs viewer. These documents usually render in their original full-quality.  You can zoom in and out to see exactly what you want, or search within the document.  Or, if it doesn’t look correct, you can click the Download link in the top left to save the original document to your computer and open it in Office.   Even complex PDF render very nicely.  Do note that Docs will keep downloading the document as you’re reading it, so if you jump to the middle of a document it may look blurry at first but will quickly clear up. You can even view famous presentations online without opening them in PowerPoint.  Note that this will only display the slides themselves, but if you’re looking for information you likely don’t need the slideshow effects anyway.   Adobe Reader Conflicts If you already have Adobe Acrobat or Adobe Reader installed on your computer, PDF files may open with the Adobe plugin.  If you’d prefer to read your PDFs with the Docs PDF Viewer, then you need to disable the Adobe plugin.  Enter the following in your Address Bar to open your Chrome Plugins page: chrome://plugins/ and then click Disable underneath the Adobe Acrobat plugin. Now your PDFs will always open with the Docs viewer instead. Performance Who hasn’t been frustrated by clicking a link to a PDF file, only to have your browser pause for several minutes while Adobe Reader struggles to download and display the file?  Google Chrome’s default behavior of simply downloading the files and letting you open them is hardly more helpful.  This extension takes away both of these problems, since it renders the documents on Google’s servers.  Most documents opened fairly quickly in our tests, and we were able to read large PDFs only seconds after clicking their link.  Also, the Google Docs viewer rendered the documents much better than the HTML version in Google’s cache. Google Docs did seem to have problem on some files, and we saw error messages on several documents we tried to open.  If you encounter this, click the Download link in the top left corner to download the file and view it from your desktop instead. Conclusion Google Docs has improved over the years, and now it offers fairly good rendering even on more complex documents.  This extension can make your browsing easier, and help documents and PDFs feel more like part of the Internet.  And, since the documents are rendered on Google’s servers, it’s often faster to preview large files than to download them to your computer. Link Download the Docs PDF/PowerPoint Viewer extension from Google Similar Articles Productive Geek Tips Integrate Google Docs with Outlook the Easy WayGoogle Image Search Quick FixView the Time & Date in Chrome When Hiding Your TaskbarView Maps and Get Directions in Google ChromeHow To Export Documents from Google Docs to Your Computer TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium

    Read the article

  • How does one find out which application is associated with an indicator icon?

    - by Amos Annoy
    It is trivial to do this in Ubuntu 10.04. The question is specific to Ubuntu 12.04. some pertinent references (src: answer to What is the difference between indicators and a system tray?: Here is the documentation for indicators: Application indicators | Ubuntu App Developer libindicate Reference Manual libappindicator Reference Manual also DesktopExperienceTeam/ApplicationIndicators - Ubuntu Wiki ref: How can the application that makes an indicator icon be identified? bookmark: How does one find out which application is associated with an indicator icon in Ubuntu 12.04? is a serious question for reasons & problems outlined below and for which a significant investment has been made and is necessary for remedial purposes. reviewing refs. to find an orchestrated resolution ... (an indicator ap. indicator maybe needed) This has nothing to do (does it?) with right click. How can an indicator's icon in Ubuntu 12.04 be matched with the program responsible for it's manifestation on the top panel? A list of running applications can include all processes using System Monitor. How is the correct matching process found for an indicator? How are the sub-indicator applications identified? These are the aps associated with the components of an indicators drop-down menu. (This was to be a separate question and quite naturally follows up the progression. It is included here as it is obvious there is no provisioning to track down offending either sub or indicator aps. easily.) (The examination of SM points out a rather poignant factor in the faster battery depletion and shortened run time - the ambient quiescent CPU rate in 12.04 is now well over 20% when previously, in 10.04, it was well under 10%, between 5% and 7%! - the huge inordinate cpu overhead originates from Xorg and compiz - after booting the system, only SM is run and All Processes are selected, sorting on %CPU - switching between Resources and Processes profiles the execution overhead problem - running another ap like gedit "Text Editor" briefly gives it CPU priority - going back to S&M several aps. are at the top of the list in order: gnome-system-monitor as expected, then: Xorg, compiz, unity-panel-service, hud-service, with dbus-daemon and kworker/x:y's mixed in with some expected daemons and background tasks like nm-applet - not only do Xorg and compiz require excessive CPU time but their entourage has to come along too! further exacerbating the problem - our compute bound tasks no longer work effectively in the field - reduced battery life, reduced CPU time for custom ap.s etc. - and all this precipitated from an examination of what is going on with the battery ap. indicator - this was and is not a flippant, rhetorical or idle musing but has consequences for the credible deployment of 12.04 to reduce the negative impact of its overhead in a production environment) (I have a problem with the battery indicator - it sometimes has % and other times hh:mm - it is necessary to know the ap. & v. to get more info on controlling same. ditto: There are issues with other indicator aps.: NM vs. iwlist/iwconfig conflict, BT ap. vs RF switch, Battery ap. w/ no suspend/sleep for poor battery runtime, ... the list goes on) Details from: How can I find Application Indicator ID's? suggests looking at: file:///usr/share/indicator-application/ordering-override.keyfile [Ordering Index Overrides] nm-applet=1 gnome-power-manager=2 ibus=3 gst-keyboard-xkb=4 gsd-keyboard-xkb=5 which solves the battery ap. identification, and presumably nm is NetworkManager for the rf icon, but the envelope, blue tooth and speaker indicator aps. are still a mystery. (Also, the ordering is not correlated.) Mind you, it was simple in the past to simply right click to get the About option to find the ap. & v. info. browsing around and about: file:///usr/share/indicator-application/ordering-override.keyfile examined: file:///usr/share/indicators file:///usr/share/indicators/messages/applications/ ... perhaps?/presumably? the information sought may be buried in file:///usr/share/indicators A reference in the comments was given to: What is the difference between indicators and a system tray? quoting from that source ... Unfortunately desktop indicators are not well documented yet: I couldn't find any specification doc ... Well ... the actual document https://wiki.ubuntu.com/DesktopExperienceTeam/ApplicationIndicators#Summary does not help much but it's existential information provides considerable insight ...

    Read the article

  • Performing a clean database creation using msbuild

    - by Robert May
    So I’m taking a break from writing about other Agile stuff for a post. :)  I’m still going to get back to the other subjects, but this is fun too. Something I’ve done quite a bit of is MSBuild and CI work.  I’m experimenting with ways to improve what I’ve done in the past, particularly around database CI. Today, I developed a mechanism for starting from scratch with your database.  By scratch, I mean blowing away the existing database and creating it again from a single command line call.  I’m a firm believer that developers should be able to get to a known clean state at the database level with a single command and that they should be operating off of their own isolated database to improve productivity.  These scripts will help that. Here’s how I did it.  First, we have to disconnect users.  I did so using the help of a script from sql server central.  Note that I’m using sqlcmd variable replacement. -- kills all the users in a particular database -- dlhatheway/3M, 11-Jun-2000 declare @arg_dbname sysname declare @a_spid smallint declare @msg varchar(255) declare @a_dbid int set @arg_dbname = '$(DatabaseName)' select @a_dbid = sdb.dbid from master..sysdatabases sdb where sdb.name = @arg_dbname declare db_users insensitive cursor for select sp.spid from master..sysprocesses sp where sp.dbid = @a_dbid open db_users fetch next from db_users into @a_spid while @@fetch_status = 0 begin select @msg = 'kill '+convert(char(5),@a_spid) print @msg execute (@msg) fetch next from db_users into @a_spid end close db_users deallocate db_users GO Once all users are booted from the database, we can commence with recreating the database.  I generated the script that is used to create a database from SQL Server management studio, so I’m only going to show the bits that weren’t generated that are important.  There are a bunch of Alter Database statements that aren’t shown. First, I had to find the default location of the database files in the install, since they can be in many different locations.  I used Method 1 from a technet blog and then modified it a bit to do what I needed to do.  I ended up using dynamic SQL because for the life of me, I couldn’t get the “Filename” property to not return an error when I used anything besides a string.  I’m dropping the database first, if it exists.  Here’s the code:   IF EXISTS(SELECT 1 FROM [master].[sys].[databases] WHERE [name] = N'$(DatabaseName)') BEGIN drop database $(DatabaseName) END; go IF EXISTS(SELECT 1 FROM [master].[sys].[databases] WHERE [name] = 'zzTempDBForDefaultPath') BEGIN DROP DATABASE zzTempDBForDefaultPath END; -- Create temp database. Because no options are given, the default data and --- log path locations are used CREATE DATABASE zzTempDBForDefaultPath; DECLARE @Default_Data_Path VARCHAR(512), @Default_Log_Path VARCHAR(512); --Get the default data path SELECT @Default_Data_Path = ( SELECT LEFT(physical_name,LEN(physical_name)-CHARINDEX('\',REVERSE(physical_name))+1) FROM sys.master_files mf INNER JOIN sys.[databases] d ON mf.[database_id] = d.[database_id] WHERE d.[name] = 'zzTempDBForDefaultPath' AND type = 0); --Get the default Log path SELECT @Default_Log_Path = ( SELECT LEFT(physical_name,LEN(physical_name)-CHARINDEX('\',REVERSE(physical_name))+1) FROM sys.master_files mf INNER JOIN sys.[databases] d ON mf.[database_id] = d.[database_id] WHERE d.[name] = 'zzTempDBForDefaultPath' AND type = 1); --Clean up. IF EXISTS(SELECT 1 FROM [master].[sys].[databases] WHERE [name] = 'zzTempDBForDefaultPath') BEGIN DROP DATABASE zzTempDBForDefaultPath END; DECLARE @SQL nvarchar(max) SET @SQL= 'CREATE DATABASE $(DatabaseName) ON PRIMARY ( NAME = N''$(DatabaseName)'', FILENAME = N''' + @Default_Data_Path + N'$(DatabaseName)' + '.mdf' + ''', SIZE = 2048KB , FILEGROWTH = 1024KB ) LOG ON ( NAME = N''$(DatabaseName)Log'', FILENAME = N''' + @Default_Log_Path + N'$(DatabaseName)' + '.ldf' + ''', SIZE = 1024KB , FILEGROWTH = 10%) ' exec (@SQL) GO And with that, your database is created.  You can run these scripts on any server and on any database name.  To do that, I created an MSBuild script that looks like this: <Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003" ToolsVersion="4.0"> <PropertyGroup> <DatabaseName>MyDatabase</DatabaseName> <Server>localhost</Server> <SqlCmd>sqlcmd -v DatabaseName=$(DatabaseName) -S $(Server) -i </SqlCmd> <ScriptDirectory>.\Scripts</ScriptDirectory> </PropertyGroup> <Target Name ="Rebuild"> <ItemGroup> <ScriptFiles Include="$(ScriptDirectory)\*.sql"/> </ItemGroup> <Exec Command="$(SqlCmd) &quot;%(ScriptFiles.Identity)&quot;" ContinueOnError="false"/> </Target> </Project> Note that the Scripts directory is underneath the directory where I’m running the msbuild command and is relative to that directory.  Note also that the target is using batching to run each script in the scripts subdirectory, one after the other.  Each script is passed to the sqlcmd command line execution using the .Identity property on the itemgroup that is created.  This target file is saved in the file “Database.target”. To make this work, you’ll need msbuild in your path, and then run the following command: msbuild database.target /target:Rebuild Once you’ve got your virgin database setup, you’d then need to use a tool like dbdeploy.net to determine that it was a virgin database, build a change script based on the change scripts, and then you’d want another sqlcmd call to update the database with the appropriate scripts.  I’m doing that next, so I’ll post a blog update when I’ve got it working. Technorati Tags: MSBuild,Agile,CI,Database

    Read the article

  • Find odd and even rows using $.inArray() function when using jQuery Templates

    - by hajan
    In the past period I made series of blogs on ‘jQuery Templates in ASP.NET’ topic. In one of these blogs dealing with jQuery Templates supported tags, I’ve got a question how to create alternating row background. When rendering the template, there is no direct access to the item index. One way is if there is an incremental index in the JSON string, we can use it to solve this. If there is not, then one of the ways to do this is by using the jQuery’s $.inArray() function. - $.inArray(value, array) – similar to JavaScript indexOf() Here is an complete example how to use this in context of jQuery Templates: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server">     <style type="text/css">         #myList { cursor:pointer; }                  .speakerOdd { background-color:Gray; color:White;}         .speaker { background-color:#443344; color:White;}                  .speaker:hover { background-color:White; color:Black;}         .speakerOdd:hover { background-color:White; color:Black;}     </style>     <title>jQuery ASP.NET</title>     <script src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.min.js" type="text/javascript"></script>     <script src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.min.js" type="text/javascript"></script>     <script language="javascript" type="text/javascript">         var speakers = [             { Name: "Hajan1" },             { Name: "Hajan2" },             { Name: "Hajan3" },             { Name: "Hajan4" },             { Name: "Hajan5" }         ];         $(function () {             $("#myTemplate").tmpl(speakers).appendTo("#myList");         });         function oddOrEven() {             return ($.inArray(this.data, speakers) % 2) ? "speaker" : "speakerOdd";         }     </script>     <script id="myTemplate" type="text/x-jquery-tmpl">         <tr class="${oddOrEven()}">             <td> ${Name}</td>         </tr>     </script> </head> <body>     <table id="myList"></table> </body> </html> So, I have defined stylesheet classes speakerOdd and speaker as well as corresponding :hover styles. Then, you have speakers JSON string containing five items. And what is most important in our case is the oddOrEven function where $.inArray(value, data) is implemented. function oddOrEven() {     return ($.inArray(this.data, speakers) % 2) ? "speaker" : "speakerOdd"; } Remark: The $.inArray() method is similar to JavaScript's native .indexOf() method in that it returns -1 when it doesn't find a match. If the first element within the array matches value, $.inArray() returns 0. From http://api.jquery.com/jQuery.inArray/ So, now we can call oddOrEven function from inside our jQuery Template in the following way: <script id="myTemplate" type="text/x-jquery-tmpl">     <tr class="${oddOrEven()}">         <td> ${Name}</td>     </tr> </script> And the result is I hope you like it. Regards, Hajan

    Read the article

  • Day 4 - Game Sprites In Action

    - by dapostolov
    Yesterday I drew an image on the screen. Most exciting, but ... I spent more time blogging about it then actual coding. So this next little while I'm going to streamline my game and research and simply post key notes. Quick notes on the last session: The most important thing I wanted to point out were the following methods:           spriteBatch.Begin(SpriteBlendMode.AlphaBlend);           spriteBatch.Draw(sprite, position, Color.White);           spriteBatch.End(); The spriteBatch object is used to draw Textures and a 2D texture is called a Sprite A texture is generally an image, which is called an Asset in XNA The Draw Method in the Game1.cs is looped (until exit) and utilises the spriteBatch object to draw a Scene To begin drawing a Scene you call the Begin Method. To end a Scene you call the End Method. And to place an image on the Scene you call the Draw method. The most simple implementation of the draw method is:           spriteBatch.Draw(sprite, position, Color.White); 1) sprite - the 2D texture you loaded to draw 2) position - the 2d vector, a set of x & y coordinates 3) Color.White - the tint to apply to the texture, in this case, white light = nothing, nada, no tint. Game Sprites In Action! Today, I played around with Draw methods to get comfortable with their "quirks". The following is an example of the above draw method, but with more parameters available for us to use. Let's investigate!             spriteBatch.Draw(sprite, position2, null, Color.White, MathHelper.ToRadians(45.0f), new Vector2(sprite.Width / 2, sprite.Height / 2), 1.0F, SpriteEffects.None, 0.0F); The parameters (in order): 1) sprite  the texture to display 2) position2 the position on the screen / scene this can also be a rectangle 3) null the portion of the image to display within an image null = display full image this is generally used for animation strips / grids (more on this below) 4) Color.White Texture tinting White = no tint 5) MathHelper.ToRadians(45.0f) rotation of the object, in this case 45 degrees rotates from the set plotting point. 6) new Vector(0,0) the plotting point in this case the top left corner the image will rotate from the top left of the texture in the code above, the point is set to the middle of the image. 7) 1.0f Image scaling (1x) 8) SpriteEffects.None you can flip the image horizontally or vertically 9) 0.0f The z index of the image. 0 = closer, 1 behind? And playing around with different combinations I was able to come up with the following whacky display:   Checking off Yesterdays Intention List: learn game development terminology (in progress) - We learned sprite, scene, texture, and asset. how to place and position (rotate) a static image on the screen (completed) - The thing to note was, it's was in radians and I found a cool helper method to convert degrees into radians. Also, the image rotates from it's specified point. how to layer static images on the screen (completed) - I couldn't seem to get the zIndex working, but one things for sure, the order you draw the image in also determines how it is rendered on the screen. understand image scaling (in progress) - I'm not sure I have this fully covered, but for the most part plug a number in the scaling field and the image grows / shrinks accordingly. can we reuse images? (completed) - yes, I loaded one image and plotted the bugger all over the screen. understand how framerate is handled in XNA (in progress) - I hacked together some code to display the framerate each second. A framerate of 60 appears to be the standard. Interesting to note, the GameTime object does provide you with some cool timing capabilities, such as...is the game running slow? Need to investigate this down the road. how to display text , basic shapes, and colors on the screen (in progress) - i got text rendered on the screen, and i understand containing rectangles. However, I didn't display "shapes" & "colors" how to interact with an image (collision of user input?) (todo) how to animate an image and understand basic animation techniques (in progress) - I was able to create a stripe animation of numbers ranging from 1 - 4, each block was 40 x 40 pixles for a total stripe size of 160 x 40. Using the portion (source Rectangle) parameter, i limited this display to each section at varying intervals. It was interesting to note my first implementation animated at rocket speed. I then tried to create a smoother animation by limiting the redraw capacity, which seemed to work. I guess a little more research will have to be put into this for animating characters / scenes. how to detect colliding images or screen edges (todo) - but the rectangle object can detect collisions I believe. how to manipulate the image, lets say colors, stretching (in progress) - I haven't figured out how to modify a specific color to be another color, but the tinting parameter definately could be used. As for stretching, use the rectangle object as the positioning and the image will stretch to fit! how to focus on a segment of an image...like only displaying a frame on a film reel (completed) - as per basic animation techniques what's the best way to manage images (compression, storage, location, prevent artwork theft, etc.) (todo) Tomorrows Intention Tomorrow I am going to take a stab at rendering a game menu and from there I'm going to investigate how I can improve upon the code and techniques. Intention List: Render a menu, fancy or not Show the mouse cursor Hook up click event A basic animation of somesort Investigate image / menu techniques D.

    Read the article

  • Can't connect to Wired Network after installing 12.04

    - by ezz9
    I have installed 12.04 into a used HP Compaq DC 7100 CMT. Plugged in LAN cable into the computer and it says network disconnected. from what I understand on the things I've read, it's not getting the address right, maybe it's just a guess (hardware address 00:16:35:78:47:bb). I know the LAN cable is working I can get on the net with the old computer. (Old computer is using device MAC address; Auto eth0 00:11:11:E6:4F:FE). I have put this address into the newer HP and it shows last used (minutes ago) but no Internet sever not found. I tried the hardware address it says never. I feel and think this should be easy to fix. But I just don't know. Here is the info everyone has asked for, but they never say what I should do. sudo lshw -C network; rfkill list; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; uname -a; ifconfig; route -n *-network description: ethernet interface product; NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:40:00.0 logical name: eth0 verson: 01 serial: 00:16:35:78:47:bb size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000-fd configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 duplex=full firmware=5751-v3.29a latency=0 link=yes multicast=yes port=twi sted pair speed=100Mbit/s resources: irq:17 memory:f0400000-f040ffff auto lo iface lo inet loopback DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION= "Ubuntu 12.04 LTS" 00:00.0 host bridge [0600]: Inter Corporation 82915G/P/GV/GL/PL/910GL Memory Con troller Hub [8086:2580] (rev 04) 00.02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL inte grated Graphics Controller [8086:2582] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #1 [8086:2658] (rev 03) 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #2 [8086:2659] (rev 03) 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #3 [8086:265a] (rev 03) 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #4 [8086:265b] (rev 03) 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB2 UHCI Controller [8086:265c] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI bridge [8086:244e] (rev d 3) 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/ FRW (ICH6 Family) AC'97 Autio conrtroller [8086:266e] (rev 03) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/RF (ICH6/ICH6R) LPC Interfa ce Bridge [8086:2640] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 fami ly) IDE Controller [8086:266f] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Con troller [8086:2651] (rev 03) 40:00.0 Ethernet controller [0200]: Broadcom Corporation NetXreme BCM5751 Gigab it Ethernet PCI Express [14e4:1677} (rev 01) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Linux bob-desktop 3.2.0-23-generic-pae #36-Ubuntu SMP Tpr 10 22:19:09 UTC 20 12 i686 i686 i386 GNU/Linux eth0 Link encap:Ethernet HWaddr 00:16:35:78:47:bb inet6 addr: fe80::216:35ff:47bb/64 Scope:link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2517 errors:0 dropped:0 overruns:0 frame:0 TX packets:164 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:164508 (164.5 KB) TX bytes: 40884 (40.0 KB) Interrupt:17 lo Link encap:Local loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3290 errors:0 dropped:0 overruns:0 frame:0 TX packets:3290 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen: 0 RX bytes:267212 (267.2 KB) TX bytes: 267212 (267.2 KB) Kernel Ip routing table Destination Gateway Genmask Flags Metric Ref Use Iface ran this sudo dhclient eth0 no reply ran this ip addr 1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST ,MULTICAST ,UP ,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/enter 00:16:35:78:47:BB brd ff:ff:ff:ff:ff:ff inet 169.254.7.172/16 brd 169.254.255.255 scope link eth0:avahi inet6 fe80::216:35ff:fe78:47bb/64 scope link valid_lft forever preferred_lft forever Help please.

    Read the article

  • Subterranean IL: Generics and array covariance

    - by Simon Cooper
    Arrays in .NET are curious beasts. They are the only built-in collection types in the CLR, and SZ-arrays (single dimension, zero-indexed) have their own commands and IL syntax. One of their stranger properties is they have a kind of built-in covariance long before generic variance was added in .NET 4. However, this causes a subtle but important problem with generics. First of all, we need to briefly recap on array covariance. SZ-array covariance To demonstrate, I'll tweak the classes I introduced in my previous posts: public class IncrementableClass { public int Value; public virtual void Increment(int incrementBy) { Value += incrementBy; } } public class IncrementableClassx2 : IncrementableClass { public override void Increment(int incrementBy) { base.Increment(incrementBy); base.Increment(incrementBy); } } In the CLR, SZ-arrays of reference types are implicitly convertible to arrays of the element's supertypes, all the way up to object (note that this does not apply to value types). That is, an instance of IncrementableClassx2[] can be used wherever a IncrementableClass[] or object[] is required. When an SZ-array could be used in this fashion, a run-time type check is performed when you try to insert an object into the array to make sure you're not trying to insert an instance of IncrementableClass into an IncrementableClassx2[]. This check means that the following code will compile fine but will fail at run-time: IncrementableClass[] array = new IncrementableClassx2[1]; array[0] = new IncrementableClass(); // throws ArrayTypeMismatchException These checks are enforced by the various stelem* and ldelem* il instructions in such a way as to ensure you can't insert a IncrementableClass into a IncrementableClassx2[]. For the rest of this post, however, I'm going to concentrate on the ldelema instruction. ldelema This instruction pops the array index (int32) and array reference (O) off the stack, and pushes a pointer (&) to the corresponding array element. However, unlike the ldelem instruction, the instruction's type argument must match the run-time array type exactly. This is because, once you've got a managed pointer, you can use that pointer to both load and store values in that array element using the ldind* and stind* (load/store indirect) instructions. As the same pointer can be used for both input and output to the array, the type argument to ldelema must be invariant. At the time, this was a perfectly reasonable restriction, and maintained array type-safety within managed code. However, along came generics, and with it the constrained callvirt instruction. So, what happens when we combine array covariance and constrained callvirt? .method public static void CallIncrementArrayValue() { // IncrementableClassx2[] arr = new IncrementableClassx2[1] ldc.i4.1 newarr IncrementableClassx2 // arr[0] = new IncrementableClassx2(); dup newobj instance void IncrementableClassx2::.ctor() ldc.i4.0 stelem.ref // IncrementArrayValue<IncrementableClass>(arr, 0) // here, we're treating an IncrementableClassx2[] as IncrementableClass[] dup ldc.i4.0 call void IncrementArrayValue<class IncrementableClass>(!!0[],int32) // ... ret } .method public static void IncrementArrayValue<(IncrementableClass) T>( !!T[] arr, int32 index) { // arr[index].Increment(1) ldarg.0 ldarg.1 ldelema !!T ldc.i4.1 constrained. !!T callvirt instance void IIncrementable::Increment(int32) ret } And the result: Unhandled Exception: System.ArrayTypeMismatchException: Attempted to access an element as a type incompatible with the array. at IncrementArrayValue[T](T[] arr, Int32 index) at CallIncrementArrayValue() Hmm. We're instantiating the generic method as IncrementArrayValue<IncrementableClass>, but passing in an IncrementableClassx2[], hence the ldelema instruction is failing as it's expecting an IncrementableClass[]. On features and feature conflicts What we've got here is a conflict between existing behaviour (ldelema ensuring type safety on covariant arrays) and new behaviour (managed pointers to object references used for every constrained callvirt on generic type instances). And, although this is an edge case, there is no general workaround. The generic method could be hidden behind several layers of assemblies, wrappers and interfaces that make it a requirement to use array covariance when calling the generic method. Furthermore, this will only fail at runtime, whereas compile-time safety is what generics were designed for! The solution is the readonly. prefix instruction. This modifies the ldelema instruction to ignore the exact type check for arrays of reference types, and so it lets us take the address of array elements using a covariant type to the actual run-time type of the array: .method public static void IncrementArrayValue<(IncrementableClass) T>( !!T[] arr, int32 index) { // arr[index].Increment(1) ldarg.0 ldarg.1 readonly. ldelema !!T ldc.i4.1 constrained. !!T callvirt instance void IIncrementable::Increment(int32) ret } But what about type safety? In return for ignoring the type check, the resulting controlled mutability pointer can only be used in the following situations: As the object parameter to ldfld, ldflda, stfld, call and constrained callvirt instructions As the pointer parameter to ldobj or ldind* As the source parameter to cpobj In other words, the only operations allowed are those that read from the pointer; stind* and similar that alter the pointer itself are banned. This ensures that the array element we're pointing to won't be changed to anything untoward, and so type safety within the array is maintained. This is a typical example of the maxim that whenever you add a feature to a program, you have to consider how that feature interacts with every single one of the existing features. Although an edge case, the readonly. prefix instruction ensures that generics and array covariance work together and that compile-time type safety is maintained. Tune in next time for a look at the .ctor generic type constraint, and what it means.

    Read the article

  • The Linux powered LAN Gaming House

    - by sachinghalot
    LAN parties offer the enjoyment of head to head gaming in a real-life social environment. In general, they are experiencing decline thanks to the convenience of Internet gaming, but Kenton Varda is a man who takes his LAN gaming very seriously. His LAN gaming house is a fascinating project, and best of all, Linux plays a part in making it all work.Varda has done his own write ups (short, long), so I'm only going to give an overview here. The setup is a large house with 12 gaming stations and a single server computer.The client computers themselves are rack mounted in a server room, and they are linked to the gaming stations on the floor above via extension cables (HDMI for video and audio and USB for mouse and keyboard). Each client computer, built into a 3U rack mount case, is a well specced gaming rig in its own right, sporting an Intel Core i5 processor, 4GB of RAM and an Nvidia GeForce 560 along with a 60GB SSD drive.Originally, the client computers ran Ubuntu Linux rather than Windows and the games executed under WINE, but Varda had to abandon this scheme. As he explains on his site:"Amazingly, a majority of games worked fine, although many had minor bugs (e.g. flickering mouse cursor, minor rendering artifacts, etc.). Some games, however, did not work, or had bad bugs that made them annoying to play."Subsequently, the gaming computers have been moved onto a more conventional gaming choice, Windows 7. It's a shame that WINE couldn't be made to work, but I can sympathize as it's rare to find modern games that work perfectly and at full native speed. Another problem with WINE is that it tends to suffer from regressions, which is hardly surprising when considering the difficulty of constantly improving the emulation of the Windows API. Varda points out that he preferred working with Linux clients as they were easier to modify and came with less licensing baggage.Linux still runs the server and all of the tools used are open source software. The hardware here is a Intel Xeon E3-1230 with 4GB of RAM. The storage hanging off this machine is a bit more complex than the clients. In addition to the 60GB SSD, it also has 2x1TB drives and a 240GB SDD.When the clients were running Linux, they booted over PXE using a toolchain that will be familiar to anyone who has setup Linux network booting. DHCP pointed the clients to the server which then supplied PXELINUX using TFTP. When booted, file access was accomplished through network block device (NBD). This is a very easy to use system that allows you to serve the contents of a file as a block device over the network. The client computer runs a user mode device driver and the device can be mounted within the file system using the mount command.One snag with offering file access via NBD is that it's difficult to impose any security restrictions on different areas of the file system as the server only sees a single file. The advantage is perfomance as the client operating system simply sees a block device, and besides, these security issues aren't relevant in this setup.Unfortunately, Windows 7 can't use NBD, so, Varda had to switch to iSCSI (which works in both server and client mode under Linux). His network cards are not compliant with this standard when doing a netboot, but fortunately, gPXE came to the rescue, and he boostraps it over PXE. gPXE is also available as an ISO image and is worth knowing about if you encounter an awkward machine that can't manage a network boot. It can also optionally boot from a HTTP server rather than the more traditional TFTP server.According to Varda, booting all 12 machines over the Gigabit Ethernet network is surprisingly fast, and once booted, the machines don't seem noticeably slower than if they were using local storage. Once loaded, most games attempt to load in as much data as possible, filling the RAM, and the the disk and network bandwidth required is small. It's worth noting that these are aspects of this project that might differ from some other thin client scenarios.At time of writing, it doesn't seem as though the local storage of the client machines is being utilized. Instead, the clients boot into Windows from an image on the server that contains the operating system and the games themselves. It uses the copy on write feature of LVM so that any writes from a client are added to a differencing image allocated to that client. As the administrator, Varda can log into the Linux server and authorize changes to the master image for updates etc.SummaryOverall, Varda estimates the total cost of the project at about $40,000, and of course, he needed a property that offered a large physical space in order to house the computers and the gaming workstations. Obviously, this project has stark differences to most thin client projects. The balance between storage, network usage, GPU power and security would not be typical of an office installation, for example. The only letdown is that WINE proved to be insufficiently compatible to run a wide variety of modern games, but that is, perhaps, asking too much of it, and hats off to Varda for trying to make it work.

    Read the article

  • MERGE gives better OUTPUT options

    - by Rob Farley
    MERGE is very cool. There are a ton of useful things about it – mostly around the fact that you can implement a ton of change against a table all at once. This is great for data warehousing, handling changes made to relational databases by applications, all kinds of things. One of the more subtle things about MERGE is the power of the OUTPUT clause. Useful for logging.   If you’re not familiar with the OUTPUT clause, you really should be – it basically makes your DML (INSERT/DELETE/UPDATE/MERGE) statement return data back to you. This is a great way of returning identity values from INSERT commands (so much better than SCOPE_IDENTITY() or the older (and worse) @@IDENTITY, because you can get lots of rows back). You can even use it to grab default values that are set using non-deterministic functions like NEWID() – things you couldn’t normally get back without running another query (or with a trigger, I guess, but that’s not pretty). That inserted table I referenced – that’s part of the ‘behind-the-scenes’ work that goes on with all DML changes. When you insert data, this internal table called inserted gets populated with rows, and then used to inflict the appropriate inserts on the various structures that store data (HoBTs – the Heaps or B-Trees used to store data as tables and indexes). When deleting, the deleted table gets populated. Updates get a matching row in both tables (although this doesn’t mean that an update is a delete followed by an inserted, it’s just the way it’s handled with these tables). These tables can be referenced by the OUTPUT clause, which can show you the before and after for any DML statement. Useful stuff. MERGE is slightly different though. With MERGE, you get a mix of entries. Your MERGE statement might be doing some INSERTs, some UPDATEs and some DELETEs. One of the most common examples of MERGE is to perform an UPSERT command, where data is updated if it already exists, or inserted if it’s new. And in a single operation too. Here, you can see the usefulness of the deleted and inserted tables, which clearly reflect the type of operation (but then again, MERGE lets you use an extra column called $action to show this). (Don’t worry about the fact that I turned on IDENTITY_INSERT, that’s just so that I could insert the values) One of the things I love about MERGE is that it feels almost cursor-like – the UPDATE bit feels like “WHERE CURRENT OF …”, and the INSERT bit feels like a single-row insert. And it is – but into the inserted and deleted tables. The operations to maintain the HoBTs are still done using the whole set of changes, which is very cool. And $action – very convenient. But as cool as $action is, that’s not the point of my post. If it were, I hope you’d all be disappointed, as you can’t really go near the MERGE statement without learning about it. The subtle thing that I love about MERGE with OUTPUT is that you can hook into more than just inserted and deleted. Did you notice in my earlier query that my source table had a ‘src’ field, that wasn’t used in the insert? Normally, this would be somewhat pointless to include in my source query. But with MERGE, I can put that in the OUTPUT clause. This is useful stuff, particularly when you’re needing to audit the changes. Suppose your query involved consolidating data from a number of sources, but you didn’t need to insert that into the actual table, just into a table for audit. This is now very doable, either using the INTO clause of OUTPUT, or surrounding the whole MERGE statement in brackets (parentheses if you’re American) and using a regular INSERT statement. This is also doable if you’re using MERGE to just do INSERTs. In case you hadn’t realised, you can use MERGE in place of an INSERT statement. It’s just like the UPSERT-style statement we’ve just seen, except that we want nothing to match. That’s easy to do, we just use ON 1=2. This is obviously more convoluted than a straight INSERT. And it’s slightly more effort for the database engine too. But, if you want the extra audit capabilities, the ability to hook into the other source columns is definitely useful. Oh, and before people ask if you can also hook into the target table’s columns... Yes, of course. That’s what deleted and inserted give you.

    Read the article

  • Migrating Virtual Iron guest to Oracle VM 3.x

    - by scoter
    As stated on the official site, Oracle in 2009, acquired a provider of server virtualization management software named Virtual Iron; you can find all the acquisition details at this link. Into the FAQ on the official site you can also view that, for the future, Oracle plans to fully integrate Virtual Iron technology into Oracle VM products, and any enhancements will be delivered as a part of the combined solution; this is what is going on with Oracle VM 3.x. So, customers started asking us to migrate Virtual Iron guests to Oracle VM. IMPORTANT: This procedure needs a dedicated OVM-Server with no-guests running on top; be careful while execute this procedure on production environments. In these little steps you will find how-to migrate, as fast as possible, your guests between VI ( Virtual Iron ) and Oracle VM; keep in mind that OracleVM has a built-in P2V utility ( Official Documentation )  that you can use to migrate guests between VI and Oracle VM. Concepts: VI repositories.  On VI we have the same "repository" concept as in Oracle VM; the difference between these two products is that VI use a raw-lun as repository ( instead of using ocfs2 and its capabilities, like ref-links ). The VI "raw-lun" repository, with a pure operating-system perspective, may be presented as in this picture: Infact on this "raw-lun" VI create an LVM2 volume-group. The VI "raw-lun" repository, with an hypervisor perspective, may be presented as in this picture: So, the relationships are: LVM2-Volume-Group <-> VI Repository LVM2-Logical-Volume <-> VI guest virtual-disk The first step is to present the VI repository ( raw-lun ) to your dedicated OVM-Server. Prepare dedicated OVM-Server On the OVM-Server ( OVS ) you need to discover new lun and, after that, discover volume-group and logical-volumes containted in VI repository; due to default OVS configuration you need to edit lvm2 configuration file: /etc/lvm/lvm.conf     # By default for OVS we restrict every block device:     # filter = [ "r/.*/" ] and comment the line starting with "filter" as above. Now you have to discover the raw-lun presented and, next, activate volume-group and logical-volumes: #!/bin/bash for HOST in `ls /sys/class/scsi_host`;do echo '- - -' > /sys/class/scsi_host/$HOST/scan; done CPATH=`pwd` cd /dev for DEVICE in `ls sd[a-z] sd?[a-z]`;do echo '1' > /sys/block/$DEVICE/device/rescan; done cd $CPATH cd /dev/mapper for PARTITION in `ls *[a-z] *?[a-z]`;do partprobe /dev/mapper/$PARTITION; done cd $CPATH vgchange -a yAfter that you will see a new device:[root@ovs01 ~]# cd /dev/6000F4B00000000000210135bef64994[root@ovs01 6000F4B00000000000210135bef64994]# ls -l 6000F4B0000000000061013* lrwxrwxrwx 1 root root 77 Oct 29 10:50 6000F4B00000000000610135c3a0b8cb -> /dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cb By your OVM-Manager create a guest server with the same definition as on VI:same core number as VI source guestsame memory as VI source guestsame number of disks as VI source guest ( you can create OVS virtual disk with a small size of 1GB because the "clone" will, eventually, extend the size of your new virtual disks )Summarizing:source-virtual-disk path ( VI ):/dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cbdest-virtual-disk path ( OVS ):/OVS/Repositories/0004fb00000300006cfeb81c12f12f00/VirtualDisks/0004fb000012000055e0fc4c5c8a35ee.img ** ** = to identify your virtual disk you have verify its name under the "vm.cfg" file of your new guest.Clone VI virtual-disk to OVS virtual-diskdd if=/dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cb of=/OVS/Repositories/0004fb00000300006cfeb81c12f12f00/VirtualDisks/0004fb000012000055e0fc4c5c8a35ee.img Clean unsupported parameters and changes on OVS.1. Restore original /etc/lvm/lvm.conf    # By default for OVS we restrict every block device:     filter = [ "r/.*/" ]    and uncomment the line starting with "filter" as above.2. Force-stop lvm2-monitor service  # service lvm2-monitor force-stop 3. Restore original /etc/lvm directories ( archive, backup and cache )  # cd /etc/lvm  # rm -fr archive backup cache; mkdir archive backup cache4. Reboot OVSRefresh OVS repository and start your guest.By OracleVM Manager refresh your repository:By OracleVM Manager start your "migrated" guest: Comments and corrections are welcome.  Simon COTER 

    Read the article

  • SQL Server - Rebuilding Indexes

    - by Renso
    Goal: Rebuild indexes in SQL server. This can be done one at a time or with the example script below to rebuild all index for a specified table or for all tables in a given database. Why? The data in indexes gets fragmented over time. That means that as the index grows, the newly added rows to the index are physically stored in other sections of the allocated database storage space. Kind of like when you load your Christmas shopping into the trunk of your car and it is full you continue to load some on the back seat, in the same way some storage buffer is created for your index but once that runs out the data is then stored in other storage space and your data in your index is no longer stored in contiguous physical pages. To access the index the database manager has to "string together" disparate fragments to create the full-index and create one contiguous set of pages for that index. Defragmentation fixes that. What does the fragmentation affect?Depending of course on how large the table is and how fragmented the data is, can cause SQL Server to perform unnecessary data reads, slowing down SQL Server’s performance.Which index to rebuild?As a rule consider that when reorganize a table's clustered index, all other non-clustered indexes on that same table will automatically be rebuilt. A table can only have one clustered index.How to rebuild all the index for one table:The DBCC DBREINDEX command will not automatically rebuild all of the indexes on a given table in a databaseHow to rebuild all indexes for all tables in a given database:USE [myDB]    -- enter your database name hereDECLARE @tableName varchar(255)DECLARE TableCursor CURSOR FORSELECT table_name FROM information_schema.tablesWHERE table_type = 'base table'OPEN TableCursorFETCH NEXT FROM TableCursor INTO @tableNameWHILE @@FETCH_STATUS = 0BEGINDBCC DBREINDEX(@tableName,' ',90)     --a fill factor of 90%FETCH NEXT FROM TableCursor INTO @tableNameENDCLOSE TableCursorDEALLOCATE TableCursorWhat does this script do?Reindexes all indexes in all tables of the given database. Each index is filled with a fill factor of 90%. While the command DBCC DBREINDEX runs and rebuilds the indexes, that the table becomes unavailable for use by your users temporarily until the rebuild has completed, so don't do this during production  hours as it will create a shared lock on the tables, although it will allow for read-only uncommitted data reads; i.e.e SELECT.What is the fill factor?Is the percentage of space on each index page for storing data when the index is created or rebuilt. It replaces the fill factor when the index was created, becoming the new default for the index and for any other nonclustered indexes rebuilt because a clustered index is rebuilt. When fillfactor is 0, DBCC DBREINDEX uses the fill factor value last specified for the index. This value is stored in the sys.indexes catalog view. If fillfactor is specified, table_name and index_name must be specified. If fillfactor is not specified, the default fill factor, 100, is used.How do I determine the level of fragmentation?Run the DBCC SHOWCONTIG command. However this requires you to specify the ID of both the table and index being. To make it a lot easier by only requiring you to specify the table name and/or index you can run this script:DECLARE@ID int,@IndexID int,@IndexName varchar(128)--Specify the table and index namesSELECT @IndexName = ‘index_name’    --name of the indexSET @ID = OBJECT_ID(‘table_name’)  -- name of the tableSELECT @IndexID = IndIDFROM sysindexesWHERE id = @ID AND name = @IndexName--Show the level of fragmentationDBCC SHOWCONTIG (@id, @IndexID)Here is an example:DBCC SHOWCONTIG scanning 'Tickets' table...Table: 'Tickets' (1829581556); index ID: 1, database ID: 13TABLE level scan performed.- Pages Scanned................................: 915- Extents Scanned..............................: 119- Extent Switches..............................: 281- Avg. Pages per Extent........................: 7.7- Scan Density [Best Count:Actual Count].......: 40.78% [115:282]- Logical Scan Fragmentation ..................: 16.28%- Extent Scan Fragmentation ...................: 99.16%- Avg. Bytes Free per Page.....................: 2457.0- Avg. Page Density (full).....................: 69.64%DBCC execution completed. If DBCC printed error messages, contact your system administrator.What's important here?The Scan Density; Ideally it should be 100%. As time goes by it drops as fragmentation occurs. When the level drops below 75%, you should consider re-indexing.Here are the results of the same table and clustered index after running the script:DBCC SHOWCONTIG scanning 'Tickets' table...Table: 'Tickets' (1829581556); index ID: 1, database ID: 13TABLE level scan performed.- Pages Scanned................................: 692- Extents Scanned..............................: 87- Extent Switches..............................: 86- Avg. Pages per Extent........................: 8.0- Scan Density [Best Count:Actual Count].......: 100.00% [87:87]- Logical Scan Fragmentation ..................: 0.00%- Extent Scan Fragmentation ...................: 22.99%- Avg. Bytes Free per Page.....................: 639.8- Avg. Page Density (full).....................: 92.10%DBCC execution completed. If DBCC printed error messages, contact your system administrator.What's different?The Scan Density has increased from 40.78% to 100%; no fragmentation on the clustered index. Note that since we rebuilt the clustered index, all other index were also rebuilt.

    Read the article

  • How to fix Ubuntu 12.04.3 boot to black screen full of errors in white text, after upgrading on dell inspiron 1501

    - by Ibuntu
    I am running a Dell Inspiron 1501 I use Linux only. No Microsoft or Apple operating systems (or really anything closed-source). I've only been using Linux for a little over a year but I'm starting to gain a comfortable level of familiarity with the system and terminology. I've been having some issues with Quantel Quetzal and Raring Ringtail, especially with older hardware, so I opted to install Ubuntu 12.04.3 Precise Pangolin on the Inspiron 1501. I checked my MD5 sum after downloading my ISO and all was good. I have in fact used this iso/dvd to install Precise Pangolin successfully on a few other systems (some of which are even older than this laptop). Install goes fine. The wireless card doesn't work out of the box but this is a known issue which is fairly easy to fix. So, first thing I did was open up a terminal and run sudo apt-get update && sudo apt-get upgrade which, part way through, crashed (I assume lightdm and possibly X) and took me to a black screen filled with white lines of text that were either errors or just the ouputs of commands. The reason I say that is because I was unable to gleam any useful information from the output on the screen. I did take a picture however and will post a link. After that, every time I boot the system it goes right to that black screen posting all the error messages or output in white text. I never get a purple Ubuntu splash, so from what I can tell after reading this wiki article: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen That means that after the kernel is selected, it is unable to correctly implement the settings it needs. If the purple splash never shows, the frame buffer was never set correctly right? This leads me to believe that it could be a kernel issue? The wiki suggested to try and pinpoint the issue by rolling back kernels until I find one that works. Is this my best option? I think I'm going to give it a try anyways and will let everyone know if I am able to solve the issue this way. I have since done a few reinstalls and some trouble-shooting including a couple hours scouring the net for anyone with any kind of similar issue. Most of the issues I could find involved getting a black screen after login and none of them said anything about any information output on this black screen. My reinstalls have taught me that there is no issue updating, but as soon as I run sudo apt-get upgrade my system goes to the black screen and every time I boot it up it does the same thing. The only way to fix is by reinstall. I never get any ability to log in. After a hard power off to the laptop (because I cannot use ctrl+alt+del to reboot) when it boots again it goes to the grub boot menu and I can select between regular boot, recovery mode and the two memtest options. I never tried the memtest options but the other two both lead to the same black screen. Some people having a black/blank screen issue claim to have fixed it by using 12.10 or 13.04 but I believe they were having a different issue where they got a black/blank screen after logging in. I think I will still give these images a try, but mostly figured I would just wait another day or two for 13.10. Other things I figured I would try from the following three articles: After logging in, there's a black screen and my cursor, nothing else! in Ubuntu 12.10 Black Screen on Login After Upgrading to 12.04 I can't get to the login screen include opening a terminal using ctrl+alt+f1 and trying a variety of reseting unity, x settings, lightdm (or switching to gdm); but I doubt this will work or that I will even be able to access a terminal. I'm pretty sure the whole system is stuck after it loads the last line on the black screen. I will try these things and post more information when I have. Hopefully someone has an idea in the meantime and I will keep checking back trying to find a solution. Thank you. Here are 3 different pictures of the error message. I had to take with my phone: http://ubuntuone.com/album/0TBBkxmVajJIQQtoN9mVdN

    Read the article

  • How to create Captcha in ASP.NET

    - by Samir R. Bhogayta
    1. Create one page with name "Captcha.aspx" 2. No any control require in this page 3. Go to Captcha.aspx.vb write the below code Protected Sub Page_Load(sender As Object, e As System.EventArgs) Handles Me.Load         'create object of Bitmap Class and set its width and height.         Dim objBMP As Bitmap = New Bitmap(180, 51)         'Create Graphics object and assign bitmap object to graphics' object.         Dim objGraphics As Graphics = Graphics.FromImage(objBMP)         objGraphics.Clear(Color.White)         objGraphics.TextRenderingHint = TextRenderingHint.AntiAlias         Dim objFont As Font = New Font("arial", 30, FontStyle.Bold)         'genetating random 6 digit random number         Dim randomStr As String = GeneratePassword()         'set this random number in session         Session.Add("randomStr", randomStr)         Session.Add("randomStrCountry", randomStr)         objGraphics.DrawString(randomStr, objFont, Brushes.Black, 2, 2)         Response.ContentType = "image/GIF"         objBMP.Save(Response.OutputStream, ImageFormat.Gif)         objFont.Dispose()         objGraphics.Dispose()         objBMP.Dispose()     End Sub     Public Function GeneratePassword() As String         ' Below code describes how to create random numbers.some of the digits and letters         ' are ommited because they look same like "i","o","1","0","I","O".         Dim allowedChars As String = "a,b,c,d,e,f,g,h,j,k,m,n,p,q,r,s,t,u,v,w,x,y,z,"         allowedChars += "A,B,C,D,E,F,G,H,J,K,L,M,N,P,Q,R,S,T,U,V,W,X,Y,Z,"         allowedChars += "2,3,4,5,6,7,8,9"         Dim sep() As Char = {","c}         Dim arr() As String = allowedChars.Split(sep)         Dim passwordString As String = ""         Dim temp As String         Dim rand As Random = New Random()         Dim i As Integer         For i = 0 To 5 - 1 Step i + 1             temp = arr(rand.Next(0, arr.Length))             passwordString += temp         Next         Return passwordString     End Function 4. Use this page in you aspx page like this img alt="" border="0" src="Captcha.aspx" style="cursor: move; height: 60px; width: 200px;" //                                   your textbox to insert code by user.

    Read the article

  • Why Moq is thorwing "expected Invocation on the mock at least once". Where as it is being set once,e

    - by Mohit
    Following is the code. create a class lib add the ref to NUnit framework 2.5.3.9345 and Moq.dll 4.0.0.0 and paste the following code. Try running it on my machine it throws TestCase 'MoqTest.TryClassTest.IsMessageNotNull' failed: Moq.MockException : Expected invocation on the mock at least once, but was never performed: v = v.Model = It.Is(value(Moq.It+<c__DisplayClass21[MoqTest.GenInfo]).match) at Moq.Mock.ThrowVerifyException(IProxyCall expected, Expression expression, Times times, Int32 callCount) at Moq.Mock.VerifyCalls(Interceptor targetInterceptor, MethodCall expected, Expression expression, Times times) at Moq.Mock.VerifySet[T](Mock1 mock, Action1 setterExpression, Times times, String failMessage) at Moq.Mock1.VerifySet(Action`1 setterExpression) Class1.cs(22,0): at MoqTest.TryClassTest.IsMessageNotNull() using System; using System.Collections.Generic; using System.Linq; using System.Text; using Moq; using NUnit.Framework; namespace MoqTest { [TestFixture] public class TryClassTest { [Test] public void IsMessageNotNull() { var mockView = new Mock<IView<GenInfo>>(); mockView.Setup(v => v.ModuleId).Returns(""); TryPresenter tryPresenter = new TryPresenter(mockView.Object); tryPresenter.SetMessage(new object(), new EventArgs()); // mockView.VerifySet(v => v.Message, Times.AtLeastOnce()); mockView.VerifySet(v => v.Model = It.Is<GenInfo>(x => x != null)); } } public class TryPresenter { private IView<GenInfo> view; public TryPresenter(IView<GenInfo> view) { this.view = view; } public void SetMessage(object sender, EventArgs e) { this.view.Model = null; } } public class MyView : IView<GenInfo> { #region Implementation of IView<GenInfo> public string ModuleId { get; set; } public GenInfo Model { get; set; } #endregion } public interface IView<T> { string ModuleId { get; set; } T Model { get; set; } } public class GenInfo { public String Message { get; set; } } } And if you change one line mockView.VerifySet(v = v.Model = It.Is(x = x != null)); to mockView.VerifySet(v = v.Model, Times.AtLeastOnce()); it works fine. I think Exception is incorrect.

    Read the article

  • CodeIgniter: Passing variables via URL - alternatives to using GET

    - by John Durrant
    I'm new to CodeIgniter and have just discovered the difficulties using the GET method of passing variables via the URL (e.g. domain.com/page.php?var1=1&var2=2). I gather that one approach is to pass the variables in the URI segments but haven't quite figured out how to do that yet as it seems to create the expectation of having a function in the controller named as the specific URI segment???? Anyway Instead of using GET I've decided to use POST by adapting a submit button (disguised as a link) with the variables in hidden input fields. I've created the following solution which seems to work fine, but am wondering whether I'm on the right track here or whether there is an easier way of passing variables via a link within CodeIgniter? I've created the following class in application/libraries/ <?php if ( ! defined('BASEPATH')) exit('No direct script access allowed'); class C_variables { function variables_via_link($action, $link_text, $style, $link_data) { $attributes = array('style' => 'margin:0; padding:0; display: inline;'); echo form_open($action, $attributes); $attributes = array('class' => $style, 'name' => 'link'); echo form_submit($attributes, $link_text); foreach ($link_data as $key => $value){ echo form_hidden($key, $value); } echo form_close(); } } ?> With the following CSS: /* SUBMIT BUTTON AS LINK adapted from thread: http://forums.digitalpoint.com/showthread.php?t=403667 Cross browser support (apparently). */ .submit_as_link { background: transparent; border-top: 0; border-right: 0; border-bottom: 1px solid #00F; border-left: 0; color: #00F; display: inline; margin: 0; padding: 0; cursor: hand /* Added to show hand when hovering */ } *:first-child+html .submit_as_link { /* hack needed for IE 7 */ border-bottom: 0; text-decoration: underline; } * html .submit_as_link { /* hack needed for IE 5/6 */ border-bottom: 0; text-decoration: underline; } Link then created using the following code in the VIEW: <?php $link = new C_variables; $link_data=array('var1' => 1, 'var2' => 2); $link ->variables_via_link('destination_page', 'here is a link!', 'submit_as_link', $link_data); ?> Thanks for your help...

    Read the article

  • Android: Adding static header to the top of a ListActivity

    - by GrandPrix
    Currently I have a class that is extending the ListActivity class. I need to be able to add a few static buttons above the list that are always visible. I've attempted to grab the ListView using getListView() from within the class. Then I used addHeaderView(View) to add a small layout to the top of the screen. Header.xml <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent" > <Button android:id="@+id/testButton" android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="Income" android:textSize="15dip" android:layout_weight="1" /> </LinearLayout> Before I set the adapter I do: ListView lv = getListView(); lv.addHeaderView(findViewById(R.layout.header)); This results in nothing happening to the ListView except for it being populated from my database. No buttons appear above it. Another approach I tried as adding padding to the top of the ListView. When I did this it successfully moved down, however, if I added any above it, it pushed the ListView over. No matter what I do it seems as though I cannot put a few buttons above the ListView when I used the ListActivity. Thanks in advance. synic, I tried your suggestion previously. I tried it again just for the sake of sanity, and the button did not display. Below is the layout file for the activity and the code I've implemented in the oncreate(). //My listactivity I am trying to add the header to public class AuditActivity extends ListActivity { Budget budget; @Override public void onCreate(Bundle savedInstanceState) { Cursor test; super.onCreate(savedInstanceState); setContentView(R.layout.audit); ListView lv = getListView(); LayoutInflater infalter = getLayoutInflater(); ViewGroup header = (ViewGroup) infalter.inflate(R.layout.header, lv, false); lv.addHeaderView(header); budget = new Budget(this); /* try { test = budget.getTransactions(); showEvents(test); } finally { } */ // switchTabSpecial(); } Layout.xml for activity: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent"> <ListView android:id="@android:id/list" android:layout_width="wrap_content" android:layout_height="wrap_content" /> <TextView android:id="@android:id/empty" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="@string/empty" /> </LinearLayout>

    Read the article

  • JsTree v1.0 - How to manipulate effectively the data from the backend to render the trees and operate correctly?

    - by Jean Paul
    Backend info: PHP 5 / MySQL URL: http://github.com/downloads/vakata/jstree/jstree_pre1.0_fix_1.zip Table structure for table discussions_tree -- CREATE TABLE IF NOT EXISTS `discussions_tree` ( `id` int(11) NOT NULL AUTO_INCREMENT, `parent_id` int(11) NOT NULL DEFAULT '0', `user_id` int(11) NOT NULL DEFAULT '0', `label` varchar(16) DEFAULT NULL, `position` bigint(20) unsigned NOT NULL DEFAULT '0', `left` bigint(20) unsigned NOT NULL DEFAULT '0', `right` bigint(20) unsigned NOT NULL DEFAULT '0', `level` bigint(20) unsigned NOT NULL DEFAULT '0', `type` varchar(255) CHARACTER SET utf8 COLLATE utf8_unicode_ci DEFAULT NULL, `h_label` varchar(16) NOT NULL DEFAULT '', `fulllabel` varchar(255) DEFAULT NULL, UNIQUE KEY `uidx_3` (`id`), KEY `idx_1` (`user_id`), KEY `idx_2` (`parent_id`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=8 ; /*The first element should in my understanding not even be shown*/ INSERT INTO `discussions_tree` (`id`, `parent_id`, `user_id`, `label`, `position`, `left`, `right`, `level`, `type`, `h_label`, `fulllabel`) VALUES (0, 0, 0, 'Contacts', 0, 1, 1, 0, NULL, '', NULL); INSERT INTO `discussions_tree` (`id`, `parent_id`, `user_id`, `label`, `position`, `left`, `right`, `level`, `type`, `h_label`, `fulllabel`) VALUES (1, 0, 0, 'How to Tag', 1, 2, 2, 0, 'drive', '', NULL); Front End : I've simplified the logic, it has 6 trees actually inside of a panel and that works fine $array = array("Discussions"); $id_arr = array("d"); $nid = 0; foreach ($array as $k=> $value) { $nid++; ?> <li id="<?=$value?>" class="label"> <a href='#<?=$value?>'><span> <?=$value?> </span></a> <div class="sub-menu" style="height:auto; min-height:120px; background-color:#E5E5E5" > <div class="menu" id="menu_<?=$id_arr[$k]?>" style="position:relative; margin-left:56%"> <img src="./js/jsTree/create.png" alt="" id="create" title="Create" > <img src="./js/jsTree/rename.png" alt="" id="rename" title="Rename" > <img src="./js/jsTree/remove.png" alt="" id="remove" title="Delete"> <img src="./js/jsTree/cut.png" alt="" id="cut" title="Cut" > <img src="./js/jsTree/copy.png" alt="" id="copy" title="Copy"> <img src="./js/jsTree/paste.png" alt="" id="paste" title="Paste"> </div> <div id="<?=$id_arr[$k]?>" class="jstree_container"></div> </div> </li> <!-- JavaScript neccessary for this tree : <?=$value?> --> <script type="text/javascript" > jQuery(function ($) { $("#<?=$id_arr[$k]?>").jstree({ // List of active plugins used "plugins" : [ "themes", "json_data", "ui", "crrm" , "hotkeys" , "types" , "dnd", "contextmenu"], // "ui" :{ "initially_select" : ["#node_"+ $nid ] } , "crrm": { "move": { "always_copy": "multitree" }, "input_width_limit":128 }, "core":{ "strings":{ "new_node" : "New Tag" }}, "themes": {"theme": "classic"}, "json_data" : { "ajax" : { "url" : "./js/jsTree/server-<?=$id_arr[$k]?>.php", "data" : function (n) { // the result is fed to the AJAX request `data` option return { "operation" : "get_children", "id" : n.attr ? n.attr("id").replace("node_","") : 1, "state" : "", "user_id": <?=$uid?> }; } } } , "types" : { "max_depth" : -1, "max_children" : -1, "types" : { // The default type "default" : { "hover_node":true, "valid_children" : [ "default" ], }, // The `drive` nodes "drive" : { // can have files and folders inside, but NOT other `drive` nodes "valid_children" : [ "default", "folder" ], "hover_node":true, "icon" : { "image" : "./js/jsTree/root.png" }, // those prevent the functions with the same name to be used on `drive` nodes.. internally the `before` event is used "start_drag" : false, "move_node" : false, "remove_node" : false } } }, "contextmenu" : { "items" : customMenu , "select_node": true} }) //Hover function binded to jstree .bind("hover_node.jstree", function (e, data) { $('ul li[rel="drive"], ul li[rel="default"], ul li[rel=""]').each(function(i) { $(this).find("a").attr('href', $(this).attr("id")+".php" ); }) }) //Create function binded to jstree .bind("create.jstree", function (e, data) { $.post( "./js/jsTree/server-<?=$id_arr[$k]?>.php", { "operation" : "create_node", "id" : data.rslt.parent.attr("id").replace("node_",""), "position" : data.rslt.position, "label" : data.rslt.name, "href" : data.rslt.obj.attr("href"), "type" : data.rslt.obj.attr("rel"), "user_id": <?=$uid?> }, function (r) { if(r.status) { $(data.rslt.obj).attr("id", "node_" + r.id); } else { $.jstree.rollback(data.rlbk); } } ); }) //Remove operation .bind("remove.jstree", function (e, data) { data.rslt.obj.each(function () { $.ajax({ async : false, type: 'POST', url: "./js/jsTree/server-<?=$id_arr[$k]?>.php", data : { "operation" : "remove_node", "id" : this.id.replace("node_",""), "user_id": <?=$uid?> }, success : function (r) { if(!r.status) { data.inst.refresh(); } } }); }); }) //Rename operation .bind("rename.jstree", function (e, data) { data.rslt.obj.each(function () { $.ajax({ async : true, type: 'POST', url: "./js/jsTree/server-<?=$id_arr[$k]?>.php", data : { "operation" : "rename_node", "id" : this.id.replace("node_",""), "label" : data.rslt.new_name, "user_id": <?=$uid?> }, success : function (r) { if(!r.status) { data.inst.refresh(); } } }); }); }) //Move operation .bind("move_node.jstree", function (e, data) { data.rslt.o.each(function (i) { $.ajax({ async : false, type: 'POST', url: "./js/jsTree/server-<?=$id_arr[$k]?>.php", data : { "operation" : "move_node", "id" : $(this).attr("id").replace("node_",""), "ref" : data.rslt.cr === -1 ? 1 : data.rslt.np.attr("id").replace("node_",""), "position" : data.rslt.cp + i, "label" : data.rslt.name, "copy" : data.rslt.cy ? 1 : 0, "user_id": <?=$uid?> }, success : function (r) { if(!r.status) { $.jstree.rollback(data.rlbk); } else { $(data.rslt.oc).attr("id", "node_" + r.id); if(data.rslt.cy && $(data.rslt.oc).children("UL").length) { data.inst.refresh(data.inst._get_parent(data.rslt.oc)); } } } }); }); }); // This is for the context menu to bind with operations on the right clicked node function customMenu(node) { // The default set of all items var control; var items = { createItem: { label: "Create", action: function (node) { return {createItem: this.create(node) }; } }, renameItem: { label: "Rename", action: function (node) { return {renameItem: this.rename(node) }; } }, deleteItem: { label: "Delete", action: function (node) { return {deleteItem: this.remove(node) }; }, "separator_after": true }, copyItem: { label: "Copy", action: function (node) { $(node).addClass("copy"); return {copyItem: this.copy(node) }; } }, cutItem: { label: "Cut", action: function (node) { $(node).addClass("cut"); return {cutItem: this.cut(node) }; } }, pasteItem: { label: "Paste", action: function (node) { $(node).addClass("paste"); return {pasteItem: this.paste(node) }; } } }; // We go over all the selected items as the context menu only takes action on the one that is right clicked $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element) { if ( $(element).attr("id") != $(node).attr("id") ) { // Let's deselect all nodes that are unrelated to the context menu -- selected but are not the one right clicked $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); } }); //if any previous click has the class for copy or cut $("#<?=$id_arr[$k]?>").find("li").each(function(index,element) { if ($(element) != $(node) ) { if( $(element).hasClass("copy") || $(element).hasClass("cut") ) control=1; } else if( $(node).hasClass("cut") || $(node).hasClass("copy")) { control=0; } }); //only remove the class for cut or copy if the current operation is to paste if($(node).hasClass("paste") ) { control=0; // Let's loop through all elements and try to find if the paste operation was done already $("#<?=$id_arr[$k]?>").find("li").each(function(index,element) { if( $(element).hasClass("copy") ) $(this).removeClass("copy"); if ( $(element).hasClass("cut") ) $(this).removeClass("cut"); if ( $(element).hasClass("paste") ) $(this).removeClass("paste"); }); } switch (control) { //Remove the paste item from the context menu case 0: switch ($(node).attr("rel")) { case "drive": delete items.renameItem; delete items.deleteItem; delete items.cutItem; delete items.copyItem; delete items.pasteItem; break; case "default": delete items.pasteItem; break; } break; //Remove the paste item from the context menu only on the node that has either copy or cut added class case 1: if( $(node).hasClass("cut") || $(node).hasClass("copy") ) { switch ($(node).attr("rel")) { case "drive": delete items.renameItem; delete items.deleteItem; delete items.cutItem; delete items.copyItem; delete items.pasteItem; break; case "default": delete items.pasteItem; break; } } else //Re-enable it on the clicked node that does not have the cut or copy class { switch ($(node).attr("rel")) { case "drive": delete items.renameItem; delete items.deleteItem; delete items.cutItem; delete items.copyItem; break; } } break; //initial state don't show the paste option on any node default: switch ($(node).attr("rel")) { case "drive": delete items.renameItem; delete items.deleteItem; delete items.cutItem; delete items.copyItem; delete items.pasteItem; break; case "default": delete items.pasteItem; break; } break; } return items; } $("#menu_<?=$id_arr[$k]?> img").hover( function () { $(this).css({'cursor':'pointer','outline':'1px double teal'}) }, function () { $(this).css({'cursor':'none','outline':'1px groove transparent'}) } ); $("#menu_<?=$id_arr[$k]?> img").click(function () { switch(this.id) { //Create only the first element case "create": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ switch(index) { case 0: $("#<?=$id_arr[$k]?>").jstree("create", '#'+$(element).attr("id"), null, /*{attr : {href: '#' }}*/null ,null, false); break; default: $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); break; } }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; //REMOVE case "remove": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ //only execute if the current node is not the first one (drive) if( $(element).attr("id") != $("div.jstree > ul > li").first().attr("id") ) { $("#<?=$id_arr[$k]?>").jstree("remove",'#'+$(element).attr("id")); } else $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; //RENAME NODE only one selection case "rename": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ if( $(element).attr("id") != $("div.jstree > ul > li").first().attr("id") ) { switch(index) { case 0: $("#<?=$id_arr[$k]?>").jstree("rename", '#'+$(element).attr("id") ); break; default: $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); break; } } else $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; //Cut case "cut": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ switch(index) { case 0: $("#<?=$id_arr[$k]?>").jstree("cut", '#'+$(element).attr("id")); $.facebox('<p class=\'p_inner teal\'>Operation "Cut" successfully done.<p class=\'p_inner teal bold\'>Where to place it?'); setTimeout(function(){ $.facebox.close(); $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id")); }, 2000); break; default: $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); break; } }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; //Copy case "copy": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ switch(index) { case 0: $("#<?=$id_arr[$k]?>").jstree("copy", '#'+$(element).attr("id")); $.facebox('<p class=\'p_inner teal\'>Operation "Copy": Successfully done.<p class=\'p_inner teal bold\'>Where to place it?'); setTimeout(function(){ $.facebox.close(); $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); }, 2000); break; default: $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); break; } }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; case "paste": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ switch(index) { case 0: $("#<?=$id_arr[$k]?>").jstree("paste", '#'+$(element).attr("id")); break; default: $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); break; } }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; } }); <? } ?> server.php $path='../../../..'; require_once "$path/phpfoo/dbif.class"; require_once "$path/global.inc"; // Database config & class $db_config = array( "servername"=> $dbHost, "username" => $dbUser, "password" => $dbPW, "database" => $dbName ); if(extension_loaded("mysqli")) require_once("_inc/class._database_i.php"); else require_once("_inc/class._database.php"); //Tree class require_once("_inc/class.ctree.php"); $dbLink = new dbif(); $dbErr = $dbLink->connect($dbName,$dbUser,$dbPW,$dbHost); $jstree = new json_tree(); if(isset($_GET["reconstruct"])) { $jstree->_reconstruct(); die(); } if(isset($_GET["analyze"])) { echo $jstree->_analyze(); die(); } $table = '`discussions_tree`'; if($_REQUEST["operation"] && strpos($_REQUEST["operation"], "_") !== 0 && method_exists($jstree, $_REQUEST["operation"])) { foreach($_REQUEST as $k => $v) { switch($k) { case 'user_id': //We are passing the user_id from the $_SESSION on each request and trying to pick up the min and max value from the table that matches the 'user_id' $sql = "SELECT max(`right`) , min(`left`) FROM $table WHERE `user_id`=$v"; //If the select does not return any value then just let it be :P if (!list($right, $left)=$dbLink->getRow($sql)) { $sql = $dbLink->dbSubmit("UPDATE $table SET `user_id`=$v WHERE `id` = 1 AND `parent_id` = 0"); $sql = $dbLink->dbSubmit("UPDATE $table SET `user_id`=$v WHERE `parent_id` = 1 AND `label`='How to Tag' "); } else { $sql = $dbLink->dbSubmit("UPDATE $table SET `user_id`=$v, `right`=$right+2 WHERE `id` = 1 AND `parent_id` = 0"); $sql = $dbLink->dbSubmit("UPDATE $table SET `user_id`=$v, `left`=$left+1, `right`=$right+1 WHERE `parent_id` = 1 AND `label`='How to Tag' "); } break; } } header("HTTP/1.0 200 OK"); header('Content-type: application/json; charset=utf-8'); header("Cache-Control: no-cache, must-revalidate"); header("Expires: Mon, 26 Jul 1997 05:00:00 GMT"); header("Pragma: no-cache"); echo $jstree->{$_REQUEST["operation"]}($_REQUEST); die(); } header("HTTP/1.0 404 Not Found"); ?> The problem: DND *(Drag and Drop) works, Delete works, Create works, Rename works, but Copy, Cut and Paste don't work

    Read the article

  • How to set up default schema name in JPA configuration?

    - by Roman
    I found that in hibernate config file we could set up parameter hibernate.default_schema: <hibernate-configuration> <session-factory> ... <property name="hibernate.default_schema">myschema</property> ... </session-factory> </hibernate-configuration> Now I'm using JPA and I want to do the same. Otherwise I have to add parameter schema to each @Table annotation like: @Entity @Table (name = "projectcategory", schema = "SCHEMANAME") public class Category implements Serializable { ... } As I understand this parameter should be somewhere in this part of configuration: <bean id="domainEntityManagerFactory" class="org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean"> <property name="persistenceUnitName" value="JiraManager"/> <property name="dataSource" ref="domainDataSource"/> <property name="jpaVendorAdapter"> <bean class="org.springframework.orm.jpa.vendor.HibernateJpaVendorAdapter"> <property name="generateDdl" value="false"/> <property name="showSql" value="false"/> <property name="databasePlatform" value="${hibernate.dialect}"/> </bean> </property> </bean> <bean id="domainDataSource" class="com.mchange.v2.c3p0.ComboPooledDataSource" destroy-method="close"> <property name="driverClass" value="${db.driver}" /> <property name="jdbcUrl" value="${datasource.url}" /> <property name="user" value="${datasource.username}" /> <property name="password" value="${datasource.password}" /> <property name="initialPoolSize" value="5"/> <property name="minPoolSize" value="5"/> <property name="maxPoolSize" value="15"/> <property name="checkoutTimeout" value="10000"/> <property name="maxStatements" value="150"/> <property name="testConnectionOnCheckin" value="true"/> <property name="idleConnectionTestPeriod" value="50"/> </bean> ... but I can't find its name in google. Any ideas?

    Read the article

< Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >