Search Results

Search found 7374 results on 295 pages for 'strange behaviour'.

Page 172/295 | < Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >

• Linux RAID: Replacing Failed Drive...permanantly

  - by user137519

  Okay, odd question here. I have a server with RAID 5. A drive failed, in a really physically in a really odd way. On the machine it boots and is seen by the BIOS but...no partition can be seen on the drive consistantly (in and out). 2 out of 3 drives working...I made new spare disk and added it, RAID 5 rebuilt clean. All appears well but...when I reboot it keeps trying to use the 2nd drive which doesn't give any partition data, so of course the RAID 5 gets 2 out of 3...again. The status of my drive is as follows: /dev/sda2:Good /dev/sdb2 (drive has physical problem so no partition data) bad, /dev/sdc2:good /dev/sdd2:good. Every time I reboot the mdadm system seems to keep trying to use /dev/sdb which has physical failure (although spins and is detected). /dev/sdd is the new drive I created. I added /dev/sdd to the raid and it rebuilds the raid but this action isn't memorized upon reboot so it keeps listing /dev/sda and /dev/sdc but doesn't use the perfectly good /dev/sdd until I re-add manually. I've tried removing the dead drive with the mdadm tool, but as it cannot see /dev/sdb paritions it will not fail or remove it (says partition doesn't exist). the /etc/mdadm.conf was automatically made on the original OS install which only lists: DEVICE partitions MAILADDR root ARRAY /dev/md2 super-minor=2 ARRAY /dev/md0 super-minor=0 ARRAY /dev/md1 super-minor=1 Basically just the raids to use on boot. I need to remove this semi-dead drive (/dev/sdb) but I'd prefer to know why this is happening before I do. any ideas or suggestions. I supposed I could attempt to clone/replace /dev/sdb (the partitions on drive show up, then disappear shortly after) but given the partition "chester cat" behaviour this seems risky to me and as I have a working "spare" it seems unnecessary. Thanks in advance for your insight.

  Read the article

• Copying files to my laptop makes them locked

  - by John

  When I save files from e.g. remote desktop or from an email (outlook) attachments, or from skype even to my local machine they show a locked Icon on the file. Then e.g. SQL Server doesn't let me restore backups as it says the operating system doesn't have access to the file. I've had success fixing this by setting the ownership of the parent folder to my user and then let it apply to sub folders. Also sometimes I need to click - Proerties - Security - Advanced - Change Permmissions, then check "change child permissions..." and apply on the parent dir. I'm using Windows 7 64 bit Proffessional, on HP Probook 4530, and I have a administrator user. This is a real pain to do everytime. I suspect it might be because of HP software that came with the laptop, I think there is drive encryption as part of the protect tools. Although I'm hoping there's something in windows i can set to change the behaviour to not lock these files.

  Read the article

• How to setup apache to catch a proxy_pass from nginx?

  - by Paté

  I have a working apache vhost such as <VirtualHost localhost:10006> DocumentRoot "/home/pate/***/git/kohana_site/public/site/" </VirtualHost> <VirtualHost *:10006> ServerName api.* DocumentRoot "/home/pate/***/git/kohana_site/public/api/" LogLevel debug </VirtualHost> If i point to localhost:10006 I get my website and api.localhost:10006 I get my api. Then I have haproxy setup on top of that, that runs on port 10010 and both localhost:10010 and api.localhost:10010 have the expected behaviour. Now I have nginx setup on port 80 with this configuration. server { listen 10000; server_name api.*; location / { proxy_pass http://legacy_server; } } server { listen 10000 default; server_name _; location /nginx_status { stub_status on; access_log off; } # images are accessed via the CDN over HTTP (not https) location /n/image { proxy_pass http://image_caching_server; } location / { return 301 https://$host:10014$request_uri; } } upstream legacy_server { server localhost:10010 fail_timeout=0; } the problem is that apache does not recognize the vhost properly and redirects api.localhost to the website instead of the api. I tried playing with set_proxy_header Host $host but it doesn't seem to do anything.

  Read the article

• SSH hangs when executing command remotely

  - by Serty Oan

  Client : OpenSSH_5.1p1 Debian-5ubuntu1 (Ubuntu 9.04) Server : OpenSSH_5.1p1 Debian-5 (Proxmox 2.6.24-7-pve) I use SSH to execute commands remotely on the server (module check_by_ssh of Nagios). But SSH hangs from time to time when trying to execute commands. I can log to the server via SSH but not executing a simple 'ls'. And it seems to block from all clients from the same IP address. Authentication is not the problem, may it be made by SSH keys or password. ssh -l root -p 2222 server.domain.tld 'ls' Here the client debug info debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR *** skipping approx 40 env var ignored debug1: Sending command: ls debug2: channel 0: request exec confirm 1 It hangs there. Then after a random time, it works again (without doing anything). Killing all sshd process on the server seems to work too. It works from a Putty. I saw that some people had trouble like this due to ISP reverse DNS problem, but it does not seem to be the case here. It can work for hours and then not work for half an hour or so. What could explain this behaviour ?

  Read the article

• Is it possible to get ESC to behave as an actual escape key?

  - by leftaroundabout

  So I have finally switched, not so much because I'm yet convinced Emacs in itself is the better editor but because it certainly does have more powerful extensions. I am still using vim-mode though, perhaps that's part of my problem... but I really don't intend to abandon the modes-approach, so I'll probably stay with it. I'm getting along quite well, but one thing I find really unnerving is the behaviour of the esc key (which I have in the shift-lock position). I'm used to relying on this a lot as more or less a "panic key", which may not be nice but I find allows me to work generally quite a bit less caring about the keystrokes themselves, and thus faster. What I'd like this key to do is just get me out of any minibuffer or special editing mode into a well-defined normal state. Perhaps most importantly, I would like it to not do anything unrelated, Simulate meta. What do I have an alt key for? Close windows I'm not even in at the time. Getting interpreted as the final key in some key sequence. ... Is it possible to turn all that off and make esc an actual escape key? Vim-mode does make it behave kind of as I like in some situations, but when other plugins are involves this often breaks. Alternatively, are there different options that might suit my kind of workflow?

  Read the article

• Manual Http error response code in non-existent folder via routing

  - by Slytherin

  Apache server running on ubuntu-like linux I am getting unexpected behaviour when i try to manually send error response. If my .htaccess is responsible for the error response , then appropriate error document is loaded and displayed , with according response code in browser console. However , if my router is origin of the response code , then i get blank screen , but correct response code. .htaccess looks like this RewriteEngine On # RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule !\.(css|js|icon|zip|rar|png|jpg|gif|pdf)$ index.php [L] ErrorDocument 404 /err/404.html ErrorDocument 403 /err/403.html ErrorDocument 500 /err/500.html part of my router that sends the response is the following header("HTTP/1.1 403 Forbidden"); trying this format didnt help either header("HTTP/1.1 403 Forbidden", TRUE, 403); I also tried HTTP/1.0. Furthermore i was thinking that maybe relative path to error page might be an issue , but discarded this idea after attempting to access a document that is forbidden via .htaccess EDIT I should also point out , this scenario happens when URL for not-existing article is requested. Is it possible that Server is looking for a .htaccess file in a folder based on URL ? Eg: domain/blog/non-existent , is server looking for blog folder ? I am specifically asking this because there is no blog folder

  Read the article

• MSMQ on Win2008 R2 won't receive messages from older clients

  - by Graffen

  I'm battling a really weird problem here. I have a Windows 2008 R2 server with Message Queueing installed. On another machine, running Windows 2003 is a service that is set up to send messages to a public queue on the 2008 server. However, messages never show up on the server. I've written a small console app that just sends a "Hello World" message to a test queue on the 2008 machine. Running this app on XP or 2003 results in absolutely nothing. However, when I try running the app on my Windows 7 machine, a message is delivered just fine. I've been through all sorts of security settings, disabled firewalls on all machines etc. The event log shows nothing of interest, and no exceptions are being thrown on the clients. Running a packet sniffer (WireShark) on the server reveals only a little. When trying to send a message from XP or 2003 I only see an ICMP error "Port Unreachable" on port 3527 (which I gather is an MQPing packet?). After that, silence. Wireshark shows a nice little stream of packets when I try from my Win7 client (as expected - messages get delivered just fine from Win7). I've enabled MSMQ End2End logging on the server, but only entries from the messages sent from my Win7 machine are appearing in the log. So somehow it seems that messages are being dropped silently somewhere along the route from XP or 2003 to my 2008 server. Does anyone have any clues as to what might be causing this mysterious behaviour? -- Jesper

  Read the article

• Hiding my location to websites with region-specific languages/content

  - by Tudor

  I just went to download Microsoft Secority Essentials and it enraged me as it redirected me to a site in my home language and not the default English. If I go to America, I don't want them to speak Swahili. It reminded me of all the other websites who try to do the same. I don't want my content in greek when I'm on vacation! I for one simply can't work on a computer unless the language is English (or unless there's a VERY good reason to change the language). Location aware content is only good for download mirrors, and even then I would rather pick from a list of countries myself. (or if you can't speak anything but your own language) I know websites get your location from your IP and ISP, but is there any way you can inhibit this behaviour on a browser level? Is there any Chrome/Firefox extension for it? Do I really have no choice but to hide my IP? There's all sorts of services that claim they're hiding your IP for free so that people can't log and trace your steps through the internet, but they're probably logging it themselves and making money off it. Why else would they be free? I've found that Firefox has an Option that says "Choose your preferred language when displaying pages". Haven't found anything for Chrome.

  Read the article

• Cisco AnyConnect VPN client - prevent connecting as work network

  - by Opmet

  From Windows 7 I'm using "Cisco AnyConnect Secure Mobility Client 3.0" to connect to our corporate network. Every time I establish the VPN connection Windows will set the type as "work network". I don't want this. So I go to "network and sharing center" and manually / interactively change it to "public network". But I have to repeat it for every new VPN connection. Is there any way to make Windows remember / persist this configuration? Can it be configured in the VPN client? Do our IT admins need to change something at server end? Motivation: A "work network" per default uses different firewall settings that allows for stuff like "network discovery" and "file shares". But I just need "remote desktop" (mstsc). Additional info: Our IT admins claimed this would be Windows default behaviour and there was nothing we could do about it: Windows would always initiate a VPN connection as "work network". Based on this statement I assume this is a "general" issue and went ahead posting here (at superuser.com).

  Read the article

• Boot stuck at blinking cursor before GRUB - only works via BIOS boot menu

  - by delta1

  I have a new box running Debian Squeeze. Grub is installed on /dev/sda, but when booting up I just get a blinking cursor, before the Grub menu. I can only boot to grub successfully when I choose boot options (during post) and select that specific drive! I have made sure the correct drive is set to boot first in the BIOS. So Grub works, but the system won't boot to that drive automatically? Any ideas on what could cause this? Drives sda/b/c are all 2TB (sda runs the system with b/c as raid device md0) with the following partitions: $ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 977 sda1 8 2 9765625 sda2 8 3 6445313 sda3 8 4 1937302627 sda4 8 32 1953514584 sdc 8 16 1953514584 sdb 9 0 1953513424 md0 but # fdisk -l /dev/sda gives WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 243202 1953514583+ ee GPT Any insight into this strange behaviour would be greatly appreciated.

  Read the article

• mod_rewrite with AJAX applictions: possible?

  - by MrJackV

  I am trying to run Shell In a Box (link) through another server (the computer running shellinabox is not accessible from the internet) . Ideally I could use ProxyPass in the Apache config to have a reverse proxy. Problem is I can't access the conf file. So I tried using .htaccess and I discover that I cannot use ProxyPass in there. So I tried and used mod_rewrite to do the job. Currently I have the following on the .htaccess file RewriteEngine On RewriteRule ^$ http://10.1.13.236:4200/ [P] However while it displays the title correctly and if I open up the source code I can see there is something in the page, nothing is diplayed on the screen (it remains blank). My suspicion is that there are problems with AJAX and this kind of proxy. What I am trying to accomplish with the mod_rewrite as close as possible behaviour to ProxyPass (Mirorr a website in a subdirectory). Is this possible? Is there some other solution (I tried phproxy and khproxy but neither of them is able to display anything)? Thanks in advance

  Read the article

• Apache Virtual Host with directory aliases

  - by brechtvhb

  Hi, I'm trying to set up a dynamic virtual host in apache with a directory alias pointing to a difirent path for every domain. Here's what I'm trying to achive. Say I have 2 domains: * www.domain1.com * www.domein2.com I want both to point to the same index.php file (C:/cms/index.php). Now the hard part ... I want directories or certain file types to point to a diffirent path for each domain. Example: * www.domain1.com/layout -> C:/store/www.domain1.com/layout * www.domain2.com/layout -> C:/store/www.domain2.com/layout * www.domain1.com/image.png -> C:/store/www.domain1.com/image.png * www.domain2.com/image.png -> C:/store/www.domain2.com/image.png However the admin directory should point to the same path again for all sites * www.domain1.com/admin -> C:/cms/admin * www.domain2.com/admin -> C:/cms/admin Is there a way to achieve this kind of behaviour in apache 2.2 without having to create a virtualhost entry for each new domain?

  Read the article

• Windows 7 boot manager not localized on UEFI systems

  - by Massimo

  I originally posted this on SuperUser because I discovered this behaviour on my home computer, but this seems to be a general issue on UEFI systems, thus I'm posting here too; I also hope someone here can shed some light on what's going on. Italian version of Windows 7 x64 SP1, same installation media used for both situations. When running on BIOS systems, the boot manager is fully localized, both for the loading screen and for the F8 boot menu. When running on UEFI systems, the boot manager always runs in English, even if it's correctly configured to use the it-IT locale, as BCDEDIT clearly shows: Windows Boot Manager -------------------- identificatore {bootmgr} device partition=\Device\HarddiskVolume1 path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale it-IT inherit {globalsettings} default {current} resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Caricatore di avvio di Windows ------------------- identificatore {current} device partition=C: path \Windows\system32\winload.efi description Windows 7 locale it-IT inherit {bootloadersettings} recoverysequence {9ef36aa8-4188-11e3-909d-d32f0c3871c8} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} nx OptIn I also noticed something strange here; the motherboard setup shows "Windows Boot Manager" as the main boot option, while the actual boot disk is listed as the second one. Looks like the Windows Boot Manager is actually being loaded from somewhere else than the first partition of the first disk... what's going on here? Update I've also checked the EFI boot manager using bcdedit /enum FIRMWARE. That one looks correctly localized, too: Boot Manager per firmware --------------------- identificatore {fwbootmgr} displayorder {bootmgr} {9ef36aa4-4188-11e3-909d-d32f0c3871c8} {a30e8550-47e4-11e3-9ad1-806e6f6e6963} timeout 1 Windows Boot Manager -------------------- identificatore {bootmgr} device partition=\Device\HarddiskVolume1 path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale it-IT inherit {globalsettings} default {current} resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Applicazione firmware (101fffff) ------------------------------- identificatore {9ef36aa4-4188-11e3-909d-d32f0c3871c8} description CD/DVD Drive Applicazione firmware (101fffff) ------------------------------- identificatore {a30e8550-47e4-11e3-9ad1-806e6f6e6963} description Hard Drive

  Read the article

• SQL Server 2012 memory usage steadily growing

  - by pgmo

  I am very worried about the SQL Server 2012 Express instance on which my database is running: the SQL Server process memory usage is growing steadily (1.5GB after only 2 days working). The database is made of seven tables, each having a bigint primary key (Identity) and at least one non-unique index with some included columns to serve the majority of incoming queries. An external application is calling via Microsoft OLE DB some stored procedures, each of which do some calculations using intermediate temporary tables and/or table variables and finally do an upsert (UPDATE....IF @@ROWCOUNT=0 INSERT.....) - I never DROP those temporary tables explicitly: the frequency of those calls is about 100 calls every 5 seconds (I saw that the DLL used by the external application open a connection to SQL Server, do the call and then close the connection for each and every call). The database files are organized in only one filgegroup, recovery type is set to simple. Some questions to diagnose the problem: is that steadily growing memory normal? did I do any mistake in database design which probably lead to this behaviour? (no explicit temp-table drop, filegroup organization, etc) can SQL Server manage such a stored procedure call rate (100 calls every 5 seconds, i.e. 100 upsert every 5 seconds, beyond intermediate calculations)? do the continuous "open connection/do sp call/close connection" pattern disturb SQL Server? is it possible to diagnose what is causing such a memory usage? Perhaps queues of wating requests? (I ran sp_who2, but I didn't see a big amount of orphan connections from the external application) if I restrict the amount of memory which SQL Server is allowed to use, may I sooner or later get into trouble?

  Read the article

• Configuring iPad Mail app & Gmail app with different accounts? [migrated]

  - by Steve Crane

  I prefer to use the Gmail app over the standard Mail app on my iPad for reading my personal Gmail (I delete a lot of mails, newsletters, etc., after reading and this is one tap in Gmail and several in Mail). I have them set up so my personal Gmail uses the Gmail app and my work email is set up to use the standard Mail app. This all works fine except for one problem. If I'm in Gmail or Mail and send an email it sends from the relevant email address as expected. My problem is that when I share something via email from Safari or another app it sends from the email address configured in Settings for Mail (the work one) and I would prefer to do such sharing from my personal email address. Does anyone know if there is a way to achieve this? I could switch the addresses to use the other app but as I never delete work email and delete personal mail at least 50% of the time, the behaviour of the apps is perfect the way I have them set up; if only I could solve that one little problem of controlling where shared items are sent from. I am using an iPad 2 with iOS 5.1 should that be relevant.

  Read the article

• Cancelling Window 7 shutdown diables power button

  - by Jens

  Normally, pressing the power button once initiates a shut-down in Windows 7. If any programs are still running that will not quit (e.g. waiting for a dialogue response), Windows overlays the screen with a dialogue allowing the user to cancel the shut-down. I've just noticed that on two different systems here, using this cancel option disables the shut-down via power button. The power button can still be used to kill the system by holding it for a few seconds, using the Start menu button to shut the PC down still works as well. Steps to reproduce: Open Notepad, type a few characters. Do not save. Press the computer's power button. Wait until the dark screen appears. Press cancel. Press the power button again. Notice how nothing happens. What is the reason for this behaviour, and can it be disabled to always try and shut down the PC when the power button is pressed?

  Read the article

• RDP with multiple monitors, display preferences get reset?

  - by Martijn Kooij

  Problem: When I connect to my pc at the office via RDP all the application windows I had previously carefully placed on either monitor 1 or 2 will be "scrambled". Either all applications show on monitor 1 and monitor 2 is empty, or they have switched 1 <- 2. Expected behaviour: When I connect I see all the application windows on exactly the same position and in the exact same size as I left them the night before. I have the exact same monitors at home as I have at work: Primary 2560x1440, Secondary 900x1440. Yesterday I tried switching the physical cables on the host machine hoping that the hardware order of the monitors was the difference. But this morning my secondary monitor was completely blank, not even the taskbar (which I had set to ONLY show on the secondary). Somewhere there must be something to help Windows understand which physical monitor is which virtual RDP monitor is which RDP "server" monitor... Are there more options than switching the cables? This one has been bothering me for a long long time now, I hope someone has a solution or workaround for me. Edit I want to use both monitors, so I have checked the "Use all monitors" setting in the RDP client. For example I leave my mail and total commander on the right monitor, and visual studio and Firefox on the left monitor. When I connect to RDP I want to see those applications on the same positions and sizes.

  Read the article

• very slow connection to ssh server from client (but not other servers)

  - by AntonOfTheWoods

  I have an Ubuntu 12.04 laptop that is taking so long to connect to various servers (in different data centres) that it seems like a bit of a lottery whether I'll actually get a connection. If I connect to the servers between themselves it's instantaneous, and I've set UseDNS no AddressFamily inet On the servers I'm connecting to (and rebooted for good measure). I also put in the reverse DNS+IP of the cable connection I'm connecting from. If I connect from the laptop via telnet: telnet my.server 22 Then the connection is also instantaneous, so it doesn't appear to be a problem with an intervening firewall. I have the same behaviour whether I connect with the IP, a short name in my hosts or the FQDN. I'm connecting with a 50mbps (cable, sync) connection so that doesn't appear to be the problem, and when I do finally get a connection then it's a good, quick, stable one. I have tried listening on another port (8000) and that makes no difference. Web and other connections from the laptop to the machine are also very good. Does anyone have any ideas here?

  Read the article

• IIS 7: launch unique site instance per host name

  - by OlduwanSteve

  Is it possible to configure IIS 7 so that a single site with multiple bindings (or wildcard bindings) will launch a unique instance for each unique host name? To explain why this is desirable, we have an application that retrieves its configuration from a remote system. The behaviour of the application is governed by this configuration and not by the 'web.config'. The application uses its host name as a key to retrieve the configuration. Currently it is a manual process to create an identical IIS site for each instance of the application, differing only by the bindings. My thought, if it were possible, is that it would be nice to have one IIS site that effectively works as a template for an arbitrary number of dynamic sites. Whenever it is accessed by a unique host name a new instance of the site would be launched, and all further requests to that host name would go to that instance just as though I had created the site by hand. I use IIS regularly, but only for fairly straightforward site hosting. I'd like to know if this could be configured with vanilla IIS 7, but would also welcome answers that require a plugin or 3rd party product. Programming/architectural suggestions about changes to the app wouldn't really be appropriate for serverfault.

  Read the article

• What can cause the system to freeze in a way where even the reset button takes a long time to react?

  - by ThiefMaster

  What can be the reason for system freezes that are so "hard" that even the hardware reset button takes about 3 seconds until it actually resets the system (and then it actually powers down and up again instead of doing a "clean" hard reset like when pressing it during a normally running system). Since it initially happened mainly while playing videos from YouTube I suspected the graphics card - however, I replaced it recently and it did not change it. It still happens from time to time (and sometimes more often, like a few times times in the last few hours). The system is running Windows 7 - but I don't think this matters since I don't think any software, not even the OS, can actually affect the reset button's behaviour. The PC is not overheated and the freezes happen randomly. There is also no malware on the system. The CPU is an Intel Core i7-920 on a Gigabyte EX58-UD5 mainboard. What could be the cause for this problem? Faulty RAM? I did not run a full memtest86 check yet, but I wonder if there is a more likely issue than faulty RAM - checking 12G of ram does take some time after all! There are no entries in the event log - but that's what I expected since the system freezes so hard that I doubt it has time to write anything to any log.

  Read the article

• How do you get linux to honor setuid directories?

  - by Takigama

  Some time ago while in a conversation in IRC, one user in a channel I was in suggested someone setuid a directory in order for it to inherit the userid on files to solve a problem someone else was having. At the time I spoke up and said "linux doesn't support setuid directories". After that, the person giving the advice showed me a pastebin (http://codepad.org/4In62f13) of his system honouring the setuid permission set on a directory. Just to explain, when i say "linux doesnt support setuid directories" what I mean is that you can go "chmod u+s directory" and it will set the bit on the directory. However, linux (as i understood it) ignores this bit (on directories). Try as I might, I just cant quite replicate that pastebin. Someone suggested to me once that it might be possible to emulate the behaviour with selinux - and playing around with rules, its possible to force a uid on a file, but not from a setuid directory permission (that I can see). Reading around on the internet has been fairly uninformative - most places claim "no, setuid on directories does not work with linux" with the occasional "it can be done under specific circumstances" (such as this: http://arstechnica.com/etc/linux/2003/linux.ars-12032003.html) I dont remember who the original person was, but the original system was a debian 6 system, and the filesystem it was running was xfs mounted with "default,acl". I've tried replicating that, but no luck so far (tried so far with various versions of debian, ubuntu, fedora and centos) Can anyone clue me in on what or how you get a system to honor setuid on a directory?

  Read the article

• Monitor programs accessing my keyboard?

  - by Anti Earth

  As of a few days ago, my computer is behaving 'erratically'. When I am typing, my pointer will randomly move to another place in the text and start typing a semi-random string of characters. ("gvyfn" is common; It has typed this about 8 times whilst I composed all the text above) It often highlights part of or all the text and overwrites it. It sometimes goes into loops of pressing Control-alt-delete down, bringing up Windows 7 menu thing. It sometimes even messes with mouseclicks; they have unexpected results, like requesting admin priveledges from applications, instead of switching to their window. I believe this is because it is holding a alt-function key down. This behaviour happens periodically, in waves. It might subside for an hour, then continue to haunt me. I believe it to be a virus or malicious program. My anti-virus (Symantec) and multiply MS rootkit removers could not find anything suspicious. I've noticed that sometimes it re-maps keys, and types gibberish when I press certain keys (though no pattern is evident). I believe a malicious program has installed a keyhook on my computer. I'm wondering... - Is there a way to let me view which programs are emulating keystrokes? - Is there a way to view what keyboard hooks are installed? (I'm also at liberty to try any other techniques to remove this blasted thing. It is easily the most fustrating computer problem I've encountered). Thanks!

  Read the article

• SSL and regular VHost on the same server [duplicate]

  - by Pascal Boutin

  This question already has an answer here: How to stop HTTPS requests for non-ssl-enabled virtual hosts from going to the first ssl-enabled virtualhost (Apache-SNI) 1 answer I have a server running Apache 2.4 on which run several virtual hosts. The problem I noticed is that if I try to access let's say https://example.com that have no SSL setuped, apache will automatically try to access the first VHost that has SSL activated (which is litteraly not the same site). How can we prevent this strange behaviour, or in other words, how to say to Apache to ignore SSL for a given site. Here's sample of what my .conf files look like : <VirtualHost foobar.com:80> DocumentRoot /somepath/foobar.com <Directory /somepath/foobar.com> Options -Indexes Require all granted DirectoryIndex index.php AllowOverride All </Directory> ServerName foobar.com ServerAlias www.foobar.com </VirtualHost> <VirtualHost test.example.com:443> DocumentRoot /somepath/ <Directory /somepath/> Options -Indexes Require all granted AllowOverride All </Directory> ServerName test.example.com SSLEngine on SSLCertificateFile [­...] SSLCertificateKeyFile [­...] SSLCertificateChainFile [­...] </VirtualHost> With this, if I try to access https://foobar.com chrome will show me a SSL error that mention that the server was identifying itself as test.example.org Thanks in advance !

  Read the article

• What could possibly cause my computer to power down at random times?

  - by geoffreydv

  I have recently bought a new Power Supply and a new graphics card. My PC ran smoothly for a few months now but since a couple of days I'm having a strange problem. I am trying to isolate the problem to a specific piece of hardware (because if it's either the Power Supply or the Graphics card they are still under warranty). The problem started when I was playing a game (diablo 3). My PC suddenly powered down. I was unable to turn it on again by pressing the power button. I unplugged the power cable for a few seconds and plugged it back in. This time the pc powered on but the indication light turned orange instead of white as it normally does. The fans were not spinning and I did not see anything on my screen. After trying a couple of times I gave up. Two days later I tried again and this time the PC did boot up as usual. Everything looked okay until I tested if the problem was resolved by starting Diablo again. After about two minutes it powered down again as it did the first time. If I don't run any games my PC does power down after about 3-5 hours. Another fact that might be relevant: One time the PC did not shut down immediatly, instead first my graphics "powered down" but the music I was playing kept on playing. After about 20 seconds the pc powered down completely as usual. What I also noticed is that when I boot instantly after a power down, the chance of another power down occuring is much higher. Does anyone have an idea what could be causing this kind of behaviour or has a certain tool to diagnose the specific hardware parts? Thanks Specs: Memory: 6GB Processor: Intel i5 OS: Windows 7 64 bit The PC is a Dell Studio XPS 8100 with a replaced PSU and Graphics card: PSU: Corsair CX500 (500 watt) Graphics card: AMD Radeon 6850

  Read the article

• Copy past speed very slow for a large number of files on Windows [closed]

  - by Arno2501

  I've run the following test I've created a folder containing 15'000 files of 400 bytes using this batch : @ECHO off SET times=15000 FOR /L %%i IN (1,1,%times%) DO ( fsutil file createnew filename%%i.txt 400 ) then I copy past it on my Windows Computer using this command : robocopy LargeNumberOfFiles\ LargeNumberOfFiles2\ After it has completed I can see that the transfer rate was 915810 Bytes/sec this is less than 1 MB/s. It took me several seconds to copy 7 MBytes Please note that this is very slow. I've tried the same with a folder with a single file of 50 Mbytes and the transfer rate is 1219512195 Bytes/sec. (yeah GB/s) instantaneous. Why copying large number of files take so much time - ressources on a windows filesystem ? Please note that I've tried to do the same on a linux system which runs on the same computer in a virtual machine (vmware player) with ext3 filesystem. I use the cp command and the copy is instantaneous ! Please also note the following : no antivirus I've tested that behaviour on multiple windows computers (always ntfs) i always get comparable results (transfer rate under 1MB/s avg 7-8 seconds to copy 7 MBytes) I've tested on multiple linux ext3 system the copy is always instantaneous for that amount (15000 files of 400 bytes) The question is about understanding what makes windows filesystem so slow to copy large number of files compared to a linux one for instance.

  Read the article

< Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >