Search Results

Search found 13178 results on 528 pages for 'subsonic active record'.

Page 172/528 | < Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >

  • Recommended Setup

    - by Chris Ryan
    I have been running into issue with my MSSQL Database setup with speed. Here is my scenario. About 100M Rows Average: 1k Updates Per Second Hard Drives: RAID 10 SSD MDF --Active Time: 0 Log Drives: 1 SSD LDF - Simple Recovery --Active Time 99.9 --Queue: 8 I do not need a back up of the log so it is set to simple recovery but my bottleneck is still at my log. I get high WAITLOG times and thus it can not update any faster. I can't do bulk updates/transactions and each update needs to be one at a time. Is my only option to increase write performance of the log drives, add a RAID drives? Any suggestions on increasing the performance?

    Read the article

  • need to run command against multiple lines in file that start with ica-tcp

    - by Nick Parsells
    I want to run a command on each line of a file I have, however its a bit more complicated then I originally thought. The file contents look like this typically; however there are sometimes more connections: SESSIONNAME USERNAME ID STATE TYPE DEVICE services 0 Disc console 1 Conn t-rpal 48 Disc ica-tcp#0 bpofiretest 50 Active wdica rdp-tcp#2 a-nparsells 51 Active rdpwd ica-tcp 65536 Listen rdp-tcp 65537 Listen The command I want to run is reset session ica-tcp#0. I also want to run the same command on any additional connections that start with ica-tcp that the scripts finds in the file. How can I write a script like that in powershell? thanks!

    Read the article

  • Weird Windows 2003 MSDTC and SQL 2005 issue

    - by seagull surfer
    scenario: Windows 2003 sp2 x64 enterprise edition. SQL 2005 sp2 cu9 x64 Enterprise edition After restarting the resource groups on two node active-active cluster, 3 SQL 2005 instances start up fine. The 4th one starts up but starts throwing the following error. "Enlist operation failed: 0x8004d00e(XACT E NOTRANSACTION). SQL Server could not register with Microsoft Distributed Transaction Coordinator (MS DTC) as a resource manager for this transaction. The transaction may have been stopped by the client or the resource manager." MSDTC is fine since the other 3 function normally. The only way to "fix" it is to take the 4th instance offline and bring it online again. Is there any way to fix this enlistment without restarting?

    Read the article

  • Exchange 2010 - Trying to add an additional domain fails

    - by Tom Beech
    We're trying to add an additional domain to our existing exchange 2010 box. I'm doing this under our network administrator user which has pretty much every permission but i'm getting: VERBOSE: Connecting to EXCHANGE01.isd.isdevelopment.co.uk VERBOSE: Connected to EXCHANGE01.isd.isdevelopment.co.uk. [PS] C:\Windows\system32>new-AcceptedDomain -Name 'NewName' -DomainName 'newDomainaddress.com' -DomainType 'Autho ritative' Active Directory operation failed on DCSERVER01.isd.isdevelopment.co.uk. This error is not retriable. Additional inform ation: Insufficient access rights to perform the operation. Active directory response: 00002098: SecErr: DSID-03150BB9, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0 + CategoryInfo : NotSpecified: (0:Int32) [New-AcceptedDomain], ADOperationException + FullyQualifiedErrorId : 282695C2,Microsoft.Exchange.Management.SystemConfigurationTasks.NewAcceptedDomain Any help will be appreciated. Tom

    Read the article

  • php-fpm or nginx: bad gateway

    - by John Tate
    I'm getting a bad gateway error all the sudden for a site. I didn't change the configuration for the site, I just added a new server config where I put them under /etc/nginx/servers and it stopped working. The new server works, and there is no conflict between the php-fpm listen addresses. server { listen 80; server_name obfuscated.onion; location = / { root /var/www/sites/obfuse; index index.php; } location / { root /var/www/sites/obfuse; index index.php; if (!-f $request_filename) { rewrite ^(.*)$ /index.php?q=$1 last; break; } if (!-d $request_filename) { rewrite ^(.*)$ /index.php?q=$1 last; break; } } error_page 404 /index.php; location ~* ^.+.(jpg|jpeg|gif|css|png|js|ico)$ { root /var/www/sites/obfuse; access_log off; expires 30d; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/sites/obfuse$fastcgi_script_name; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param PATH_INFO $fastcgi_script_name; include fastcgi_params; } } There is nothing unusual in php-fpm's log even when I raised the level to debug. [24-Jun-2013 09:10:37.357943] DEBUG: pid 6756, fpm_scoreboard_init_main(), line 40: got clock tick '100' [24-Jun-2013 09:10:37.358950] DEBUG: pid 6756, fpm_event_init_main(), line 333: event module is kqueue and 1 fds have been reserved [24-Jun-2013 09:10:37.358978] NOTICE: pid 6756, fpm_init(), line 83: fpm is running, pid 6756 [24-Jun-2013 09:10:37.359009] DEBUG: pid 6756, main(), line 1832: Sending "1" (OK) to parent via fd=5 [24-Jun-2013 09:10:37.389215] DEBUG: pid 6756, fpm_children_make(), line 421: [pool cyruserv] child 22288 started [24-Jun-2013 09:10:37.391343] DEBUG: pid 6756, fpm_children_make(), line 421: [pool cyruserv] child 21911 started [24-Jun-2013 09:10:37.391914] DEBUG: pid 6756, fpm_event_loop(), line 362: 5776 bytes have been reserved in SHM [24-Jun-2013 09:10:37.391941] NOTICE: pid 6756, fpm_event_loop(), line 363: ready to handle connections [24-Jun-2013 09:10:38.393048] DEBUG: pid 6756, fpm_pctl_perform_idle_server_maintenance(), line 379: [pool cyruserv] currently 0 active children, 2 spare children, 2 running children. Spawning rate 1 [24-Jun-2013 09:10:39.403032] DEBUG: pid 6756, fpm_pctl_perform_idle_server_maintenance(), line 379: [pool cyruserv] currently 0 active children, 2 spare children, 2 running children. Spawning rate 1 [24-Jun-2013 09:10:40.413070] DEBUG: pid 6756, fpm_pctl_perform_idle_server_maintenance(), line 379: [pool cyruserv] currently 0 active children, 2 spare children, 2 running children. Spawning rate 1 I don't know why this has started happening, but the logs are not telling me anything. Please ask for more information than this, you'll probably need it.

    Read the article

  • Access Methods to a computer Using MAC Address

    - by Dimal Chandrasiri
    I have my own wifi network at home & recently when I checked the active clients on the wifi I found out the there is one active client. Router shows the MAC address of this client and I want to Access this computer in order to let him know that he's doing a wrong thing. I dont intent to do any harm to his data. I just want to know a method to send him a message saying "Buy you own wifi". How can I achieve this using a windows 8 computer. Is there any specific softwares that I can use or will the netsend command do the trick! Thank you.

    Read the article

  • how to find the clientname of an remote desktop session?

    - by Hemal Pandya
    We have servers on which we run tests and all users connect using the same credentials. The server allows 2 connections. What happens often is that one user is already active and the other two users keep hijacking the remaining session. Using query session, I can find out what are the active connections. But it does not list the client machine from where the session originates, which taskmanager displays. How do I get this information from a remote machine? I prefer a command line solution. Thanks in advance.

    Read the article

  • Are there videocamera which geotag individual frames?

    - by Grzegorz Adam Hankiewicz
    I'm looking for a way to record live video with the specific requirement of having each frame georeferenced with GPS. Right now I'm using a normal video camera with a PDA+GPS that records the position, but it's difficult to sync both of these plus sometimes I've forgotten to turn the PDA+GPS or it has failed for some reason and all my video has been useless. Using google I found that about two years ago a company named Seero produced such video cameras and software, but apparently the domain doesn't exist any more and I only find references of other pages mentioning it. Does somebody know of any other product? I need to record this video in HD and have some way to export to Google Maps or other GIS software the positions of the frames in a way that I can click on the map and see what was being recorded in the video at that point. The precission of the GPS tracking is good enough as one position per second, intermediate frames of the video stream can be interpolated.

    Read the article

  • Speeding up ROW_NUMBER in SQL Server

    - by BlueRaja
    We have a number of machines which record data into a database at sporadic intervals. For each record, I'd like to obtain the time period between this recording and the previous recording. I can do this using ROW_NUMBER as follows: WITH TempTable AS ( SELECT *, ROW_NUMBER() OVER (PARTITION BY Machine_ID ORDER BY Date_Time) AS Ordering FROM dbo.DataTable ) SELECT [Current].*, Previous.Date_Time AS PreviousDateTime FROM TempTable AS [Current] INNER JOIN TempTable AS Previous ON [Current].Machine_ID = Previous.Machine_ID AND Previous.Ordering = [Current].Ordering + 1 The problem is, it goes really slow (several minutes on a table with about 10k entries) - I tried creating separate indicies on Machine_ID and Date_Time, and a single joined-index, but nothing helps. Is there anyway to rewrite this query to go faster?

    Read the article

  • Possible to make mysql server both master and slave?

    - by Amy Anuszewski
    I am getting ready to move a database from one server to another. In order to reduce downtime for the client, I am wondering if it would be possible for me to turn on replication and give it time to replicate fully, then just point the customer to the new server. The issue I have is that the server I'm moving to has existing, active databases for other customers. And, the server I'm moving from has other active customers who will not be moving at this time. Is this even possible? If so, how do I configure the server I am moving from and the one I am moving to?

    Read the article

  • Domain Computers Not Listed In Network

    - by Giawa
    Our network computers are all connected to a domain, and I can see them if I search the active directory (I can click 'search active directory' and then select 'computers' and then Find Now, and all of the computers will appear). However, the computers are not listed in the network browser on any of our computers (Win XP, Win7, Linux, etc) which are connected to the domain. DC is running Windows Server 2008 (Windows Server Standard) with a configured DNS and DHCP server. All of the IPs on our local network are static IPs, although I can't see how that would make a difference. I can still connect to computers on the network via \\computer_name, but I cannot browse them in 'network' or in 'my network places'. The computer browser service is not started on the DC, but I tried starting that and it had no effect. DC currently has the firewall configured as 'off' to try to debug this problem. Thanks in advance

    Read the article

  • CNAME Wildcards Server 2003

    - by Sean.C
    Hi Gents, I'm looking to set up a wildcard cname on a FQDN but cant seem to get it to work. This is what i'm trying to achive: A Record : domain.co.uk : my.ip.address.1 A Record : en.domain.co.uk : my.ip.address.1 cname : www.*.en.domain.co.uk : --> uk.domain.co.uk I'm reasonably new to all this kind of thing, so it's pretty probably pretty straight forward. The number of sites forbids the use of multiple IP addresses. Thanks for any assistance.

    Read the article

  • What are the equivalent of the following .NET concepts (ASP.NET, IIS, Linq, etc.) in Java world?

    - by Richard77
    Hello, I'm the only one among my people who navigate in .NET water, the rest is in the Java world. So, I'd like to have some common points to talk with them. What are the equivalent concepts in Java for: (by concept, I mean the purpose of such technology) Visual Studio IIS Linq Development server that ships with VS (I don't know the name) NHibernate, Subsonic, ... ASP.NET WebForm (Is there any equivalent in Java with drag and drop) ASP.NET MVC etc.(Please, add some other concepts if they are important to know) Thanks for helping

    Read the article

  • Log monitoring using Zabbix

    - by Supratik
    I am trying to monitor a log file using Zabbix 1.8.4. I created an item using the following details: Host: Zabbix server Description: logger_test Type: Zabbix agent (active) Key: log[/tmp/scribetest/test3/test3_current,error,,100] Type of Infromation: Log Update interval (in sec): 1 sec Keep history (in days): 90 Status: Active Applications: Log files I created a trigger and attached it with the item logger_test using the following details: Name: logger_test_trigger Expression: {Zabbix server:log[/tmp/scribetest/test3/test3_current,error,,100].str(error)}=1 Severity: disaster The above settings works fine for the first time but next time the trigger shows ZBX_NOTSUPPORTED and after that item also shows "not supported" message. Can you please tell me if anything I am doing wrong here ?

    Read the article

  • AMD Radeon 7900 series: setting up 3 monitors

    - by Nilzone-
    I have an AMD Radeon 7900 series, which should support up to 6 screens. I'm having problems getting my third one working. Im running windows 8, and have installed all the latest AMD drivers. My screens are: Samusng syncmaster S27D391HS Samusng syncmaster S24B350H Samusng syncmaster S24B350H The first 24" monitor I use HDMI to DVI cable. The second 24" I use VGA to DVI cable. Lastly, for the 27" I use HDMI cable. The result is, no matter what I do, I never get more than two screens on simultaneously. I have also tried getting a DisplayPort to HDMI cable to use for the 27", but Im not sure if it was passive or active (didn't say on the box, nor did I ask). So my question is: is an active displayport to HDMI the solution, or is there someting else Im overlooking? (I have read similar posts on this subject, but I use a slightly different combo of cables. That is why I made a post of my own as well)

    Read the article

  • Cannot install grub to RAID1 (md0)

    - by Andrew Answer
    I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat This is the my mdadm output after sync: /dev/md0: Version : 0.90 Creation Time : Wed Feb 17 16:18:25 2010 Raid Level : raid1 Array Size : 470455360 (448.66 GiB 481.75 GB) Used Dev Size : 470455360 (448.66 GiB 481.75 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Nov 1 15:19:31 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 92e6ff4e:ed3ab4bf:fee5eb6c:d9b9cb11 Events : 0.11049560 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. This is my fdisk -l output: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057d19 Device Boot Start End Blocks Id System /dev/sda1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sda2 940910985 976768064 17928540 5 Extended /dev/sda5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table This is my grub install output: root@answe:~# grub-install /dev/sda /usr/sbin/grub-setup: warn: Attempting to install GRUB to a disk with multiple partition labels or both partition label and filesystem. This is not supported yet.. /usr/sbin/grub-setup: error: embedding is not possible, but this is required for cross-disk install. root@answe:~# grub-install /dev/sdb Installation finished. No error reported. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... Anybody can resolve this issue? I have big headache with this.

    Read the article

  • Log monitoring using Zabbix

    - by Supratik
    Hi I am monitoring logs using Zabbix. I am trying to monitor a log file using Zabbix 1.8.4. I created an item using the following details: Host: Zabbix server Description: logger_test Type: Zabbix agent (active) Key: log[/tmp/scribetest/test3/test3_current,error,,100] Type of Infromation: Log Update interval (in sec): 1 sec Keep history (in days): 90 Status: Active Applications: Log files I created a trigger and attached it with the item logger_test using the following details. Name: logger_test_trigger Expression: {Zabbix server:log[/tmp/scribetest/test3/test3_current,error,,100].str(error)}=1 Severity: disaster The above settings works fine for the first time but next time the trigger shows ZBX_NOTSUPPORTED and after that item also shows "not supported" message. Can you please tell me if anything I am doing wrong here ? Warm Regards Supratik

    Read the article

  • What can I do to enhance MacBook Pro internal mic sound quality in iMovie?

    - by gaearon
    After using MacBook for two years, I bought 17'' MacBook Pro. I'm pretty happy with it, performance and all, but I also was going to record some music videos for YouTube. I play guitar and sing. However I was extremely disappointed with the sound quality that comes by default. I'm 100% sure my 13'' MacBook mic was much better at recording music and singing. Currently mic can't event handle acoustic guitar, outputting sound you'd think was recorded 5 years ago in ARM format on a Nokia phone on a loud concert. It totally feels like some lame filter is cutting low and high frequencies. I want to know what settings (visible or hidden) in iMovie or Mac OS itself I might want to tweak in order to get my MBP mic record clean sound.

    Read the article

  • Any InstallPad alternatives?

    - by ianfuture
    Hi, I'm about to install new bunch of software on a Windows XP Pro PC and found InstallPad as a potential method to do it all. However before using it I was wondering if there were any other similar apps that could be better or easier to use? Requirements (should haves more than must haves): - Free - Easy to use and configure - preferably from point and click in a GUI instead of command line params or config files - Robust - bug free or still in active/ongoing development - Some level of support or active community for help or tips - Pre-existing file lists that can be adapted for own use or used outright. Thanks in advance.. Ian

    Read the article

  • Conflict between some JavaScript and jQuery on same page

    - by hollyb
    I am using a JavaScript function and some jQuery to perform two actions on a page. The first is a simple JS function to hide/show divs and change the active state of a tab: This is the JS that show/hides divs and changes the active state on some tabs: var ids=new Array('section1','section2','section3'); function switchid(id, el){ hideallids(); showdiv(id); var li = el.parentNode.parentNode.childNodes[0]; while (li) { if (!li.tagName || li.tagName.toLowerCase() != "li") li = li.nextSibling; // skip the text node if (li) { li.className = ""; li = li.nextSibling; } } el.parentNode.className = "active"; } function hideallids(){ //loop through the array and hide each element by id for (var i=0;i<ids.length;i++){ hidediv(ids[i]); } } function hidediv(id) { //safe function to hide an element with a specified id document.getElementById(id).style.display = 'none'; } function showdiv(id) { //safe function to show an element with a specified id document.getElementById(id).style.display = 'block'; } The html: <ul> <li class="active"><a onclick="switchid('section1', this);return false;">ONE</a></li> <li><a onclick="switchid('section2', this);return false;">TWO</a></li> <li><a onclick="switchid('section3', this);return false;">THREE</a></li> </ul> <div id="section1" style="display:block;">TEST</div> <div id="section2" style="display:none;">TEST 2</div> <div id="section3" style="display:none;">TEST 3</div> Now the problem.... I've added the jQuery image gallery called galleria to one of the tabs. The gallery works great when it resides in the div that is intially set to display:block. However, when it is in one of the divs that is set to display: none; part of the gallery doesn't work when the div is toggled to be visible. Specifically, the following css ceases to be written (this is created by galleria jQuery): element.style { display:block; height:50px; margin-left:-17px; width:auto; } For the life of me, I can't figure out why the gallery fails when it's div is set to display: none. Since this declaration is overwritten when a tab is clicked (via the Javascript functions above), why would this cause a problem? As I mentioned, it works perfectly when it lives the in display: block; div. Any ideas? I don't expect anybody to be familiar with the jQuery galleria image gallery... but perhaps an idea of how one might repair this problem? Thanks!

    Read the article

  • How to upgrade a single instance's size without downtime

    - by Justin Meltzer
    I'm afraid there may not be a way to do this since we're not load balancing, but I'd like to know if there is any way to upgrade an EC2 EBS backed instance to a larger size without downtime. First of all, we have everything on one instance: both our app and our database (mongodb). This is along the lines i'm thinking: I know you can create snapshots of your EBS and an AMI of your instance. We already have an AMI and we create hourly snapshots. If I spin up a new separate instance of a larger size and then implement (not sure what the right term is here) the snapshots so that our database is up to date, then I could switch the A record of our domain from the old ip address to the new one. However, I'm afraid that after copying over the data from the snapshot, by the time it takes to change the A record and have that change propagate, the data could potentially be stale. Is there a way to prevent this, and is there a better way to do this than I am suggesting?

    Read the article

  • Mac OS X 10.5/6, authenticate against by NIS or LDAP when both servers have your username

    - by Wang
    We have an organization-wide LDAP server and a department-only NIS server. Many users have accounts with the same name on both servers. Is there any way to get Leopard/Snow Leopard machines to query one server, and then the other, and let the user log in if his username/password combination matches at least one record? I can get either NIS authentication or LDAP authentication. I can even enable both, with LDAP set as higher priority, and authenticate using the name and password listed on the LDAP server. However, in the last case, if I set the LDAP domain as higher-priority in Directory Utility's search path and then provide the username/password pair listed in the NIS record, then my login is rejected even though the NIS server would accept it. Is there any way to make the OS check the rest of the search path after it finds the username?

    Read the article

  • Deployment/provisioning tool for commercial applications (not developed in-house)

    - by mfinni
    I help manage a few hosted commercial applications, and we have a lot of manual processes involved when doing new customer-instance deployments into the shared (multitenant) environment. Allow me to describe the most relevant features, and then we can talk about the tools. We have an application on AIX, that requires dozens of changes to config files (some plain text, some XML) as well as a good number of commands to be run on multiple servers - some to start the new instance, some to restart our shared authentication and reporting engines, etc. The config changes follow templates, of course. The servers in question will also depend on the initial conditions specified by the implementer/deployer - we may choose to deploy a given customer to our servers in Europe, or one set of servers may be active-active whereas a different set of servers is active-passive - in short, there's a lot of complications. We have another application that run on IIS 6 and SQL. The DBAs don't want any automation of the SQL components and that's fine with me, but automating the IIS bit would be great. For a new customer instance, we make a filesystem copy of a template Virtual Directory target named after the new customer, make a new AppPool to match, edit a VirDir template .xml file to replace the filepaths and AppPool names with the new ones, and then make a new VirDir from the modified template XML to point to the new filesystem folder and app pool. For the first case, something like ControlTier or Chef might be good. For the second, the new(ish) Web Deploy from MS would probably do a good job. Has anyone used these tools or others to do something similar for applications? More of a nice-to-have, not a fixed requirement - Has anyone used anything that works on both platforms? I'm looking for something free, because the official word is that within a year, we will have whatever HP has renamed the OpsWare suite, which should be able to do stuff like this. Edit - based on someone's suggestion, looking at CFengine for the AIX application, it doesn't seem to address my pain. The problem isn't keeping a given config synced across dozens of servers, we have rsync for that. The problem is that onboarding a new customer instance touches dozens of files, putting pieces of the same or similar information into them - some are new stanzas in existing files, some are new files, and some are new directories. This is a several-hours-long process that is also error-prone because it's mostly done by hand. I guess I'm looking for config-file generation and management. I have built a small Perl script to do something similar for a much smaller case - it binds a CSV file into variables, and then does a copy-and-search-and-replace from a set of template config files. I could probably do the same here.

    Read the article

  • Sync iPhone applications in iTunes

    - by Uwe Honekamp
    Suppose I have one the one hand one iTunes library on a PC used to sync Outlook contacts and calendar plus on the other hand one iTunes library on a Mac that syncs music, podcasts, apps, ringtones, etc. Both libraries are based on iTunes 9.0.2. It turns out that the iTunes library on the PC always tries to sync apps and ringtones as well. Unfortunately, this boils down to deleting apps and ringtones from the iPhone because the apps are not part of the iTunes library on the PC. After unchecking the checkbox to sync apps and ringtones and plugging the iPhone into the Mac the checkbox is also unchecked on the Mac. It seems as if the settings for syncing apps and ringtones are stored on the iPhone rather than in the particular iTunes library. Whenever syncing apps and ringtones is active on one machine it is also active on the other and vice versa. How can I make the PC ignore apps and ringtones and only sync contacts and calendar?

    Read the article

< Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >