Search Results

Search found 5398 results on 216 pages for 'anup 24'.

Page 173/216 | < Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >

• dhcp-snooping option 82 drops valid dhcp requests on 2610 series Procurve switches

  - by kce

  We are slowly starting to implement dhcp-snooping on our HP ProCurve 2610 series switches, all running the R.11.72 firmware. I'm seeing some strange behavior where dhcp-request or dhcp-renew packets are dropped when originating from "downstream" switches due "untrusted relay information from client". The full error: Received untrusted relay information from client <mac-address> on port <port-number> In more detail we have a 48 port HP2610 (Switch A) and a 24 port HP2610 (Switch B). Switch B is "downstream" of Switch A by virtue of a DSL connection to one of Switch A ports. The dhcp server is connected to Switch A. The relevant bits are as follows: Switch A dhcp-snooping dhcp-snooping authorized-server 192.168.0.254 dhcp-snooping vlan 1 168 interface 25 name "Server" dhcp-snooping trust exit Switch B dhcp-snooping dhcp-snooping authorized-server 192.168.0.254 dhcp-snooping vlan 1 interface Trk1 dhcp-snooping trust exit The switches are set to trust BOTH the port the authorized dhcp server is attached to and its IP address. This is all well and good for the clients attached to Switch A, but the clients attached to Switch B get denied due to the "untrusted relay information" error. This is odd for a few reasons 1) dhcp-relay is not configured on either switch, 2) the Layer-3 network here is flat, same subnet. DHCP packets should not have a modified option 82 attribute. dhcp-relay does appear to be enabled by default however: SWITCH A# show dhcp-relay DHCP Relay Agent : Enabled Option 82 : Disabled Response validation : Disabled Option 82 handle policy : append Remote ID : mac Client Requests Server Responses Valid Dropped Valid Dropped ---------- ---------- ---------- ---------- 0 0 0 0 SWITCH B# show dhcp-relay DHCP Relay Agent : Enabled Option 82 : Disabled Response validation : Disabled Option 82 handle policy : append Remote ID : mac Client Requests Server Responses Valid Dropped Valid Dropped ---------- ---------- ---------- ---------- 40156 0 0 0 And interestingly enough the dhcp-relay agent seems very busy on Switch B, but why? As far as I can tell there is no reason why dhcp requests need a relay with this topology. And furthermore I can't tell why the upstream switch is dropping legitimate dhcp requests for untrusted relay information when the relay agent in question (on Switch B) isn't modifying the option 82 attributes anyway. Adding the no dhcp-snooping option 82 on Switch A allows the dhcp traffic from Switch B to be approved by Switch A, by virtue of just turning off that feature. What are the repercussions of not validating option 82 modified dhcp traffic? If I disable option 82 on all my "upstream" switches - will they pass dhcp traffic from any downstream switch regardless of that traffic's legitimacy? This behavior is client operating system agnostic. I see it with both Windows and Linux clients. Our DHCP servers are either Windows Server 2003 or Windows Server 2008 R2 machines. I see this behavior regardless of the DHCP servers' operating system. Can anyone shed some light on what's happening here and give me some recommendations on how I should proceed with configuring the option 82 setting? I feel like i just haven't completely grokked dhcp-relaying and option 82 attributes.

  Read the article

• iSCSI timeouts under high load

  - by Antonio

  I have two servers connected via Gigabit Ethernet. One is iSCSI target, the second one is initiator. When I run mkfs.ext4 at initiator, after a while disk IO slows down critically. In the target host I can see the following in syslog: Sep 14 09:40:03 sh11 tgtd: abort_task_set(1139) found 119668c 0 Sep 14 09:40:03 sh11 tgtd: abort_cmd(1115) found 119668c 6 Sep 14 09:40:03 sh11 tgtd: abort_task_set(1139) found 119668d 0 Sep 14 09:40:03 sh11 tgtd: abort_cmd(1115) found 119668d 6 Sep 14 09:40:03 sh11 tgtd: abort_task_set(1139) found 119668e 0 Sep 14 09:40:03 sh11 tgtd: abort_cmd(1115) found 119668e 6 Sep 14 09:40:03 sh11 tgtd: abort_task_set(1139) found 1196696 0 Sep 14 09:40:03 sh11 tgtd: abort_cmd(1115) found 1196696 6 Sep 14 09:40:03 sh11 tgtd: abort_task_set(1139) found 119669e 0 Sep 14 09:40:03 sh11 tgtd: abort_cmd(1115) found 119669e 6 Sep 14 09:40:04 sh11 tgtd: abort_task_set(1139) found 119669f 0 Sep 14 09:40:04 sh11 tgtd: abort_cmd(1115) found 119669f 6 And load average grows to 12 or even more: # uptime 12:37:00 up 23 days, 13:25, 1 user, load average: 12.00, 7.00, 4.00 CentOS 6.3 tgtd 1.0.24 Intel Pentium 4 2.4GHz 1Gb RAM 2Tb WD Cavlar Green SATA 2.0 #lspci 00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02) 00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 02) 00:1d.0 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82) 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV200 QW [Radeon 7500] 02:01.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11) 02:02.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE/SATA Controller (rev 50) 02:03.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE/SATA Controller (rev 50) 02:04.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) 02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (CNR) Ethernet Controller (rev 82) Is there a way to tune target host to avoid these timeouts?

  Read the article

• PHP-FPM High Memory Usage

  - by Ruel

  I have a wordpress blog, that uses WP-SuperCache, and normally I get 100 visitors per day. With nginx + php-fpm it's blazing fast, and I have no regrets. One thing i noticed, php-fpm takes a lot of memory: top - 09:20:43 up 5 days, 15:53, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 26 total, 1 running, 25 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048576k total, 329956k used, 718620k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 10226 www-data 15 0 145m 52m 4584 S 0.0 5.1 0:07.55 php-fpm 10223 www-data 16 0 141m 48m 4692 S 0.0 4.8 0:08.70 php-fpm 20277 www-data 15 0 138m 46m 4368 S 0.0 4.5 0:07.55 php-fpm 20259 www-data 15 0 133m 41m 4600 S 0.0 4.0 0:06.68 php-fpm 12201 www-data 15 0 133m 41m 4632 S 0.0 4.0 0:08.31 php-fpm 11586 www-data 15 0 132m 40m 4292 S 0.0 3.9 0:03.27 php-fpm 29822 www-data 15 0 128m 36m 4356 S 0.0 3.6 0:05.26 php-fpm 28427 mysql 15 0 200m 7300 4764 S 0.0 0.7 0:47.89 mysqld 10202 root 18 0 98.3m 4320 1204 S 0.0 0.4 0:03.80 php-fpm 22524 root 18 0 86064 3396 2652 S 0.0 0.3 0:16.74 sshd 9882 www-data 18 0 42052 2572 804 S 0.0 0.2 0:27.52 nginx 9884 www-data 18 0 42052 2560 804 S 0.0 0.2 0:26.26 nginx 9881 www-data 18 0 42064 2524 804 S 0.0 0.2 0:29.24 nginx 9879 www-data 18 0 42032 2480 804 S 0.0 0.2 0:29.58 nginx 23771 root 15 0 12176 1820 1316 S 0.0 0.2 0:00.08 bash 28344 root 22 0 11932 1416 1184 S 0.0 0.1 0:00.00 mysqld_safe 18167 root 16 0 62628 1208 648 S 0.0 0.1 0:00.55 sshd 25941 root 15 0 12612 1192 928 R 0.0 0.1 0:02.21 top 11573 root 15 0 20876 1168 592 S 0.0 0.1 0:00.67 crond 9878 root 18 0 41000 1112 284 S 0.0 0.1 0:00.00 nginx 21736 root 23 0 21648 936 716 S 0.0 0.1 0:00.00 xinetd 11585 root 18 0 46748 816 428 S 0.0 0.1 0:00.00 saslauthd 14125 root 12 -4 12768 768 452 S 0.0 0.1 0:00.00 udevd 1 root 18 0 10352 728 616 S 0.0 0.1 0:17.93 init 24564 root 15 0 5912 680 544 S 0.0 0.1 0:01.90 syslogd 11618 root 18 0 46748 548 160 S 0.0 0.1 0:00.00 saslauthd Here's my php-fpm config: [global] pid = run/php-fpm.pid error_log = log/php-fpm.log log_level = notice [www] listen = 127.0.0.1:9000 user = www-data group = www-data pm = dynamic pm.max_children = 50 pm.start_servers = 3 pm.min_spare_servers = 3 pm.max_spare_servers = 10 pm.max_requests = 500 Sometimes it goes up to 400MB. And I'm planning to add a new website on my VPS. Is this normal?

  Read the article

• Why can blocked IPs get through my iptables? What's wrong with this configuration?

  - by NeedSomeHelp

  (Why can/How are) blocked IPs (get/getting) through my iptables? Hello and thanks for your consideration... I have configured iptables and included (below) output from the command "iptables --line-numbers -n -L" yet IP addresses (like 31.41.219.180) from IP blocks I have already blocked are getting through. Please take a look and share any input you may have. Thank you. P.S. The initial ACCEPT IP addresses are for CloudFlare. . Chain INPUT (policy DROP 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 32267 14M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 0 0 REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:!0x17/0x02 state NEW reject-with tcp-reset 3 149 8570 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 4 434 25606 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 5 0 0 ACCEPT udp -- * * 103.21.244.0/22 0.0.0.0/0 6 0 0 ACCEPT udp -- * * 103.22.200.0/22 0.0.0.0/0 7 0 0 ACCEPT udp -- * * 103.31.4.0/22 0.0.0.0/0 8 0 0 ACCEPT udp -- * * 104.16.0.0/12 0.0.0.0/0 9 0 0 ACCEPT udp -- * * 108.162.192.0/18 0.0.0.0/0 10 0 0 ACCEPT udp -- * * 141.101.64.0/18 0.0.0.0/0 11 0 0 ACCEPT udp -- * * 162.158.0.0/15 0.0.0.0/0 12 0 0 ACCEPT udp -- * * 173.245.48.0/20 0.0.0.0/0 13 0 0 ACCEPT udp -- * * 188.114.96.0/20 0.0.0.0/0 14 0 0 ACCEPT udp -- * * 190.93.240.0/20 0.0.0.0/0 15 0 0 ACCEPT udp -- * * 197.234.240.0/22 0.0.0.0/0 16 0 0 ACCEPT udp -- * * 198.41.128.0/17 0.0.0.0/0 17 0 0 ACCEPT udp -- * * 199.27.128.0/21 0.0.0.0/0 18 0 0 ACCEPT tcp -- * * 103.21.244.0/22 0.0.0.0/0 19 9 468 ACCEPT tcp -- * * 103.22.200.0/22 0.0.0.0/0 20 0 0 ACCEPT tcp -- * * 103.31.4.0/22 0.0.0.0/0 21 0 0 ACCEPT tcp -- * * 104.16.0.0/12 0.0.0.0/0 22 858 44616 ACCEPT tcp -- * * 108.162.192.0/18 0.0.0.0/0 23 376 19552 ACCEPT tcp -- * * 141.101.64.0/18 0.0.0.0/0 24 0 0 ACCEPT tcp -- * * 162.158.0.0/15 0.0.0.0/0 25 257 13364 ACCEPT tcp -- * * 173.245.48.0/20 0.0.0.0/0 26 0 0 ACCEPT tcp -- * * 188.114.96.0/20 0.0.0.0/0 27 0 0 ACCEPT tcp -- * * 190.93.240.0/20 0.0.0.0/0 28 0 0 ACCEPT tcp -- * * 197.234.240.0/22 0.0.0.0/0 29 0 0 ACCEPT tcp -- * * 198.41.128.0/17 0.0.0.0/0 30 92 4784 ACCEPT tcp -- * * 199.27.128.0/21 0.0.0.0/0 31 0 0 DROP tcp -- * * 1.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 32 0 0 DROP tcp -- * * 101.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 33 0 0 DROP tcp -- * * 102.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 34 0 0 DROP tcp -- * * 103.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 35 18 1080 DROP tcp -- * * 109.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 36 0 0 DROP tcp -- * * 112.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 37 12 656 DROP tcp -- * * 113.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 38 0 0 DROP tcp -- * * 114.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 39 0 0 DROP tcp -- * * 115.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 40 8 352 DROP tcp -- * * 116.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 41 0 0 DROP tcp -- * * 117.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 42 0 0 DROP tcp -- * * 118.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 43 2 120 DROP tcp -- * * 119.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 44 0 0 DROP tcp -- * * 120.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 45 0 0 DROP tcp -- * * 121.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 46 4 160 DROP tcp -- * * 122.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 47 4 240 DROP tcp -- * * 123.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 48 0 0 DROP tcp -- * * 125.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 49 0 0 DROP tcp -- * * 134.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 50 0 0 DROP tcp -- * * 146.185.0.0/16 0.0.0.0/0 tcp dpts:1:50000 51 6 360 DROP tcp -- * * 148.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 52 0 0 DROP tcp -- * * 151.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 53 0 0 DROP tcp -- * * 175.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 54 0 0 DROP tcp -- * * 176.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 55 0 0 DROP tcp -- * * 177.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 56 46 2696 DROP tcp -- * * 178.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 57 0 0 DROP tcp -- * * 179.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 58 4 224 DROP tcp -- * * 180.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 59 0 0 DROP tcp -- * * 181.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 60 0 0 DROP tcp -- * * 182.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 61 34 2040 DROP tcp -- * * 183.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 62 0 0 DROP tcp -- * * 185.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 63 0 0 DROP tcp -- * * 186.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 64 0 0 DROP tcp -- * * 187.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 65 18 912 DROP tcp -- * * 188.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 66 0 0 DROP tcp -- * * 189.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 67 0 0 DROP tcp -- * * 190.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 68 2 120 DROP tcp -- * * 192.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 69 0 0 DROP tcp -- * * 196.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 70 0 0 DROP tcp -- * * 197.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 71 5 300 DROP tcp -- * * 198.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 72 0 0 DROP tcp -- * * 2.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 73 0 0 DROP tcp -- * * 200.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 74 0 0 DROP tcp -- * * 201.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 75 6 360 DROP tcp -- * * 202.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 76 0 0 DROP tcp -- * * 203.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 77 4 160 DROP tcp -- * * 210.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 78 0 0 DROP tcp -- * * 211.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 79 2 96 DROP tcp -- * * 212.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 80 4 240 DROP tcp -- * * 213.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 81 0 0 DROP tcp -- * * 214.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 82 0 0 DROP tcp -- * * 215.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 83 0 0 DROP tcp -- * * 216.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 84 0 0 DROP tcp -- * * 217.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 85 4 172 DROP tcp -- * * 218.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 86 12 576 DROP tcp -- * * 219.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 87 7 372 DROP tcp -- * * 220.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 88 0 0 DROP tcp -- * * 222.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 89 0 0 DROP tcp -- * * 27.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 90 12 608 DROP tcp -- * * 31.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 91 11 528 DROP tcp -- * * 37.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 92 0 0 DROP tcp -- * * 41.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 93 0 0 DROP tcp -- * * 42.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 94 0 0 DROP tcp -- * * 43.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 95 8 480 DROP tcp -- * * 46.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 96 0 0 DROP tcp -- * * 49.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 97 6 360 DROP tcp -- * * 5.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 98 0 0 DROP tcp -- * * 58.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 99 0 0 DROP tcp -- * * 60.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 100 4 160 DROP tcp -- * * 61.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 101 32 1848 DROP tcp -- * * 62.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 102 0 0 DROP tcp -- * * 63.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 103 20 1200 DROP tcp -- * * 64.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 104 0 0 DROP tcp -- * * 65.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 105 266 15960 DROP tcp -- * * 66.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 106 3 180 DROP tcp -- * * 69.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 107 5 272 DROP tcp -- * * 72.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 108 0 0 DROP tcp -- * * 78.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 109 0 0 DROP tcp -- * * 81.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 110 3 180 DROP tcp -- * * 82.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 111 0 0 DROP tcp -- * * 83.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 112 8 384 DROP tcp -- * * 84.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 113 0 0 DROP tcp -- * * 85.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 114 0 0 DROP tcp -- * * 86.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 115 6 360 DROP tcp -- * * 87.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 116 7 408 DROP tcp -- * * 88.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 117 0 0 DROP tcp -- * * 89.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 118 0 0 DROP tcp -- * * 90.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 119 0 0 DROP tcp -- * * 91.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 120 3 152 DROP tcp -- * * 92.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 121 20 992 DROP tcp -- * * 93.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 122 9 512 DROP tcp -- * * 94.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 123 5 272 DROP tcp -- * * 95.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 124 0 0 DROP udp -- * * 1.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 125 0 0 DROP udp -- * * 101.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 126 0 0 DROP udp -- * * 102.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 127 0 0 DROP udp -- * * 103.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 128 0 0 DROP udp -- * * 109.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 129 0 0 DROP udp -- * * 112.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 130 0 0 DROP udp -- * * 113.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 131 0 0 DROP udp -- * * 114.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 132 1 112 DROP udp -- * * 115.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 133 0 0 DROP udp -- * * 116.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 134 0 0 DROP udp -- * * 117.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 135 0 0 DROP udp -- * * 118.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 136 0 0 DROP udp -- * * 119.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 137 0 0 DROP udp -- * * 120.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 138 0 0 DROP udp -- * * 121.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 139 0 0 DROP udp -- * * 122.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 140 0 0 DROP udp -- * * 123.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 141 0 0 DROP udp -- * * 125.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 142 0 0 DROP udp -- * * 134.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 143 0 0 DROP udp -- * * 146.185.0.0/16 0.0.0.0/0 udp dpts:1:50000 144 0 0 DROP udp -- * * 148.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 145 0 0 DROP udp -- * * 151.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 146 0 0 DROP udp -- * * 175.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 147 0 0 DROP udp -- * * 176.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 148 1 70 DROP udp -- * * 177.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 149 0 0 DROP udp -- * * 178.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 150 0 0 DROP udp -- * * 179.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 151 0 0 DROP udp -- * * 180.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 152 0 0 DROP udp -- * * 181.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 153 0 0 DROP udp -- * * 182.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 154 0 0 DROP udp -- * * 183.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 155 0 0 DROP udp -- * * 185.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 156 1 74 DROP udp -- * * 186.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 157 0 0 DROP udp -- * * 187.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 158 0 0 DROP udp -- * * 188.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 159 0 0 DROP udp -- * * 189.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 160 0 0 DROP udp -- * * 190.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 161 0 0 DROP udp -- * * 192.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 162 0 0 DROP udp -- * * 196.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 163 0 0 DROP udp -- * * 197.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 164 0 0 DROP udp -- * * 198.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 165 0 0 DROP udp -- * * 2.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 166 0 0 DROP udp -- * * 200.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 167 0 0 DROP udp -- * * 201.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 168 0 0 DROP udp -- * * 202.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 169 0 0 DROP udp -- * * 203.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 170 0 0 DROP udp -- * * 210.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 171 0 0 DROP udp -- * * 211.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 172 0 0 DROP udp -- * * 212.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 173 0 0 DROP udp -- * * 213.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 174 0 0 DROP udp -- * * 214.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 175 0 0 DROP udp -- * * 215.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 176 0 0 DROP udp -- * * 216.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 177 0 0 DROP udp -- * * 217.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 178 1 80 DROP udp -- * * 218.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 179 0 0 DROP udp -- * * 219.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 180 0 0 DROP udp -- * * 220.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 181 0 0 DROP udp -- * * 222.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 182 0 0 DROP udp -- * * 27.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 183 0 0 DROP udp -- * * 31.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 184 0 0 DROP udp -- * * 37.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 185 0 0 DROP udp -- * * 41.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 186 0 0 DROP udp -- * * 42.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 187 0 0 DROP udp -- * * 43.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 188 0 0 DROP udp -- * * 46.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 189 0 0 DROP udp -- * * 49.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 190 0 0 DROP udp -- * * 5.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 191 0 0 DROP udp -- * * 58.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 192 0 0 DROP udp -- * * 60.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 193 0 0 DROP udp -- * * 61.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 194 0 0 DROP udp -- * * 62.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 195 0 0 DROP udp -- * * 63.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 196 0 0 DROP udp -- * * 64.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 197 0 0 DROP udp -- * * 65.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 198 0 0 DROP udp -- * * 66.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 199 0 0 DROP udp -- * * 69.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 200 0 0 DROP udp -- * * 72.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 201 0 0 DROP udp -- * * 78.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 202 0 0 DROP udp -- * * 81.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 203 0 0 DROP udp -- * * 82.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 204 0 0 DROP udp -- * * 83.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 205 0 0 DROP udp -- * * 84.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 206 0 0 DROP udp -- * * 85.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 207 0 0 DROP udp -- * * 86.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 208 0 0 DROP udp -- * * 87.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 209 0 0 DROP udp -- * * 88.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 210 0 0 DROP udp -- * * 89.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 211 0 0 DROP udp -- * * 90.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 212 0 0 DROP udp -- * * 91.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 213 0 0 DROP udp -- * * 92.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 214 2 72 DROP udp -- * * 93.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 215 0 0 DROP udp -- * * 94.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 216 0 0 DROP udp -- * * 95.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 217 0 0 DROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:12443 218 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:11443 219 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:11444 220 23 1104 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:8447 221 24 1152 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:8443 222 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:8880 223 207 11096 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 224 19 996 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 225 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 226 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 227 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:587 228 4 216 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 229 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:465 230 14 840 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:110 231 2 120 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:995 232 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:143 233 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:993 234 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:106 235 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 236 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:5432 237 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:9008 238 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:9080 239 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:137 240 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:138 241 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:139 242 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:445 243 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:1194 244 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:53 245 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 246 73 4488 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 8 code 0 247 77 23598 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 0 0 REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:!0x17/0x02 state NEW reject-with tcp-reset 3 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 4 0 0 ACCEPT all -- lo lo 0.0.0.0/0 0.0.0.0/0 5 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy DROP 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 31004 25M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 1 333 REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:!0x17/0x02 state NEW reject-with tcp-reset 3 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 4 434 25606 ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 5 328 21324 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0

  Read the article

• 5.5.0 smtp;554 transaction failed spam message not queued

  - by Miguel

  Some users are trying to send email to certain domains using Exchange Server 2003, but the message is always is rejected and the following message is shown: 5.5.0 smtp;554 Transaction Failed Spam Message not queued The IP is not in a black list (checked using http://whatismyipaddress.com/blacklist-check and is clean - not listed). The emails were checked using using smtpdiag ("a troubleshooting tool designed to work directly on a Windows server with IIS/SMTP service enabled or with Exchange Server installed") and the connection using port 25 is ok. Also, an nslookup with set type=ptr shows (names and IP changed, "" means I typed something): C:\Documents and Settings\administrator>nslookup Default Server: publicdns.isp.net Address: 10.10.10.10 > server publicdns.isp.net Default Server: publicdns.isp.net Address: 10.10.10.10 > set type=ptr >mydomain.com Server: publicdns.isp.net Address: 10.10.10.10 mydomain.com primary name server = publicdns.isp.net responsible mail addr = root.isp.net serial = 2011061301 refresh = 10800 (3 hours) retry = 3600 (1 hour) expire = 604800 (7 days) default TTL = 86400 (1 day) > 20.21.22.23 Server: publicdns.isp.net Address: 10.10.10.10 23.22.21.20.in-addr.arpa name = mail.mydomain.com 20.21.in-addr.arpa nameserver = publicdns.isp.net 20.21.in-addr.arpa nameserver = publicdns2.isp.net publicdns2.isp.net internet address = 10.10.10.11 publicdns.isp.net internet address = 10.10.10.10 Server: publicdns.isp.net Address: 10.10.10.10 23.22.21.20.in-addr.arpa name = mail.mydomain.com 20.21.in-addr.arpa nameserver = publicdns.isp.net 20.21.in-addr.arpa nameserver = publicdns2.isp.net publicdns2.isp.net internet address = 10.10.10.11 publicdns.isp.net internet address = 10.10.10.10 > set type=mx > mydomain.com Server: publicdns.isp.net Address: 10.10.10.10 mydomain.com MX preference = 10, mail exchanger = mail.mydomain.com mydomain.com nameserver = publicdns.isp.net mydomain.com nameserver = publicdns2.isp.net mail.mydomain.com internet address = 20.21.22.23 publicdns2.isp.net internet address = 10.10.10.11 publicdns.isp.net internet address = 10.10.10.10 > set type=a > mydomain.com Server: publicdns.isp.net Address: 10.10.10.10 Nombre: mydomain.com Address: 20.21.22.23 When I test the spf record with http://www.mxtoolbox.com it shows: TXT mydomain.com 24 hrs v=spf1 a mx ptr ip4:20.21.22.23 mx:mail.mydomain.com -all Any clues of what's happening here?

  Read the article

• Squid 2.7.STABLE3-4.1 as a transparent proxy on Ubuntu Server 9.04

  - by E3 Group

  Can't get this to work at all! I'm trying to get this linux box to act as a transparent proxy and, with the help of DHCP, force everyone on the network to gate into the proxy. I have two ethernet connections, both to the same switch. And I'm trying to get 192.168.1.234 to become the default gateway. The actual WAN connection is to a gateway 192.168.1.1. eth0 is 192.168.1.234 eth1 is 192.168.1.2 Effectively I'm trying to make eth0 a LAN only interface and eth1 a WAN interface. I've oi should set the gateway for eth1 to point to 192.168.1.234 my squid.conf file has the following directives added at the bottom: nly set eth0 to have a gateway address in /etc/network/interfaces I'm not sure whether http_port 3128 transparent acl lan src 192.168.1.0/24 acl lh src 127.0.0.1/255.255.255.0 http_access allow lan http_access allow lh i've added the following routing commands: iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.1.2:3128 iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 I set a computer with TCP settings 192.168.1.234 as the gateway and opened up google.com, but it comes up with a request error. Any ideas why this isn't working? :( Been searching continuously for a solution to no avail. ----------------------------- EDIT ------------------------------- Managed to get it to route properly to the squid, here's the error I get in the browser: ERROR The requested URL could not be retrieved While trying to process the request: GET / HTTP/1.1 Host: www.google.com User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-gb,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cache-Control: max-age=0 The following error was encountered: * Invalid Request Some aspect of the HTTP Request is invalid. Possible problems: * Missing or unknown request method * Missing URL * Missing HTTP Identifier (HTTP/1.0) * Request is too large * Content-Length missing for POST or PUT requests * Illegal character in hostname; underscores are not allowed Your cache administrator is webmaster. Generated Mon, 26 Oct 2009 03:41:15 GMT by mjolnir.lloydharrington.local (squid/2.7.STABLE3)

  Read the article

• DPM 2010 PowerShell Script to Easily Restore Multiple Files

  - by bmccleary

  I’ve got what I thought would be a simple task with Data Protection Manager 2010 that is turning out to be quite frustrating. I have a file server on one server and it is the only server in a protection group. This file server is the repository for a document management application which stores the files according to the data within a SQL database. Sometimes users inadvertently delete files from within our application and we need to restore them. We have all the information needed to restore the files to include the file name, the folder that the file was stored in and the exact date that the file was deleted. It is easy for me to restore the file from within the DPM console since we have a recovery point created every day, I simply go to the day before the delete, browse to the proper folder and restore the file. The problem is that using the DPM console, the cumbersome wizard requires about 20 mouse clicks to restore a single file and it takes 2-4 minutes to get through all the windows. This becomes very irritating when a client needs 100’s of files restored… it takes all day of redundant mouse clicks to restore the files. Therefore, I want to use a PowerShell script (and I’m a novice at PowerShell) to automate this process. I want to be able to create a script that I pass in a file name, a folder, a recovery point date (and a protection group/server name if needed) and simply have the file restored back to its original location with some sort of success/failure notification. I thought it was a simple basic task of a backup solution, but I am having a heck of a time finding the right code. I have seen the sample code at http://social.technet.microsoft.com/wiki/contents/articles/how-to-use-a-windows-powershell-script-to-recover-an-item-in-data-protection-manager.aspx that I have tried to follow, but it doesn’t accomplish what I really want to do (it’s too simplistic) and there are errors in the sample code. Therefore, I would like to get some help writing a script to restore these files. An example of the known values to restore the data are: DPM Server: BACKUP01 Protection Group: Document Repository Data Protected Server: FILER01 File Path: R:\DocumentRepository\ToBackup\ClientName\Repository\2010\07\24\filename.pdf Date Deleted: 8/2/2010 (last recovery point = 8/1/2010) Bonus Points: If you can help me not only create this script, but also show me how to automate by providing a text file with the above information that the PowerShell script loops through, or even better, is able to query our SQL server for the needed data, then I would be more than willing to pay for this development.

  Read the article

• DNS "recursion not available" using a Cisco AnyConnect VPN connection

  - by codeape

  Does anyone have experience with configuring Cisco AnyConnect VPN? We have a problem with client DNS name resolution when connected over VPN. To me, it looks as if the Cisco AnyConnect VPN client intercepts DNS queries from the clients. Can someone confirm that the AnyConnect VPN client in fact does this (intercepts DNS traffic)? Where is this configured on the VPN server? EDIT: Here's how the routing table changes when I connect to the VPN: [~] $ diff -u /tmp/route_normal /tmp/route_vpn --- /tmp/route_normal 2010-01-20 19:23:47.000000000 +0100 +++ /tmp/route_vpn 2010-01-20 19:24:46.000000000 +0100 @@ -1,6 +1,10 @@ Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface +xxx.xxx.xx.xx.i 10.0.0.1 255.255.255.255 UGH 0 0 0 ath0 172.16.53.0 * 255.255.255.0 U 0 0 0 vmnet1 10.0.0.0 * 255.255.255.0 U 0 0 0 ath0 +172.17.20.0 * 255.255.255.0 U 0 0 0 cscotun 0 +192.168.111.0 172.17.20.212 255.255.255.0 UG 0 0 0 cscotun 0 172.16.140.0 * 255.255.255.0 U 0 0 0 vmnet8 +172.16.0.0 172.17.20.212 255.255.0.0 UG 0 0 0 cscotun 0 default 10.0.0.1 0.0.0.0 UG 0 0 0 ath0 EDIT 2: The IT guy has done "something" on the VPN endpoint. Now I get "recursion not available" when doing nslookup. The DNS servers have recursion enabled. So it must be the Cisco VPN DNS interception messing this up. ubuntu@domU-12-31-39-00-ED-14:~$ /opt/cisco/vpn/bin/vpn connect xxx.xxxxxx.xx ... >> Please enter your username and password ... >> notice: Establishing VPN... >> state: Connected >> notice: VPN session established to ... ubuntu@domU-12-31-39-00-ED-14:~$ nslookup www.vg.no ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server Server: 172.16.0.23 Address: 172.16.0.23#53 ** server can't find www.vg.no.compute-1.internal: REFUSED ubuntu@domU-12-31-39-00-ED-14:~$ ping 195.88.55.16 PING 195.88.55.16 (195.88.55.16) 56(84) bytes of data. 64 bytes from 195.88.55.16: icmp_seq=1 ttl=240 time=110 ms 64 bytes from 195.88.55.16: icmp_seq=2 ttl=240 time=111 ms 64 bytes from 195.88.55.16: icmp_seq=3 ttl=240 time=109 ms ^C --- 195.88.55.16 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2017ms rtt min/avg/max/mdev = 109.953/110.379/111.075/0.496 ms

  Read the article

• Dynamic DNS with Comcast

  - by colithium

  I've just recently moved across town. Previously, I had Dynamic DNS set up so I could remotely connect to my desktop (primarily to use TightVNC). My ISP was Comcast and I'm in the Denver, Colorado area. Currently, I'm still with Comcast and still in Denver. My router connects to the internet just fine and my Dynamic DNS record over at DynDNS did get updated with my router's current external IP address. So my router, DynDNS, and public DNS records all agree what my IP address is. However, I can't actually connect to anything from the outside world. My trace route to Google looks something like: Tracing route to google.com [74.125.19.147] 1 3 ms 1 ms 1 ms 192.168.1.1 (this is the internal IP address of my router) 2 * * * Request timed out. 3 9 ms 8 ms 10 ms te-8-2-ur02.wheatridge.co.denver.comcast.net [68.85.221.177] 4 12 ms 12 ms 19 ms te-0-8-0-2-ar02.aurora.co.denver.comcast.net [68.86.103.97] 5 16 ms 13 ms 11 ms pos-0-3-0-0-cr01.denver.co.ibone.comcast.net [68.86.91.1] 6 28 ms 28 ms 27 ms pos-0-9-0-0-cr01.dallas.tx.ibone.comcast.net [68.86.85.174] 7 29 ms 27 ms 28 ms pos-0-1-0-0-pe01.1950stemmons.tx.ibone.comcast.net [68.86.86.94] 8 66 ms 108 ms * 75.149.231.70 9 65 ms 68 ms 93 ms 72.14.233.77 10 67 ms 66 ms 66 ms 72.14.233.111 11 67 ms 67 ms 69 ms 216.239.43.144 12 68 ms 71 ms 73 ms 209.85.249.30 13 66 ms 66 ms 68 ms nuq04s01-in-f147.1e100.net [74.125.19.147] This is what the trace route looks like from an outside source to my DynDNS domain name: traceroute to 98.245.67.65 (98.245.67.65) 1 illuminati-130 138.67.130.61 2 138.67.63.253 138.67.63.253 3 vermiculite 138.67.253.20 4 csm-ct-gw 138.67.253.244 5 138.67.253.2 138.67.253.2 6 ge-7-24-ar01.denver.co.denver.comcast.net 68.86.128.17 7 te-0-4-0-0-ar02.denver.co.denver.comcast.net 68.86.179.21 8 te-9-3-ur01.wheatridge.co.denver.comcast.net 68.86.103.18 9 * * * {Times Out} Now my guess is, whatever is sitting just beyond my router (what the modem connects to) is gumming things up. Even though the routes aren't EXACTLY the same, that appears to be the spot that the trace route either stops or doesn't get a response. My question is, for Comcast networks (particularly in Denver), what would be the device that typically sits there? Is there anything I can do about it? That device seems to not respond to PING but does forward it along when I'm going outwards. But it looks like it eats it when the request is coming in. It's hard to prove that from these logs but I'm assuming that's the case because my router used to accept connections from the outside and I haven't changed anything on it.

  Read the article

• I can't send email from my server to gmail addresses

  - by brianegge

  I'm using postfix, and have setup spf, dkim, and domainkeys. I can get my email to go to Yahoo, but not gmail. Here's the headers from an email send to Yahoo. Yahoo reports the email as domain key verified. X-Apparently-To: brianegge at yahoo.com via 68.142.206.167; Sat, 20 Mar 2010 05:29:19 -0700 Return-Path: <domains at theeggeadventure.com> X-YahooFilteredBulk: 67.207.137.114 X-YMailISG: x7_Rl9EWLDuugoqPcORhih0FeQMOaIIpz4qfuu9ttx1xbo3uKI2kz.CLUy2cJ1BTtHAwuJtrsGRsveHIx.Dx95avNGlPPGWy_cSpnEwWLXGxBciO.YgtSQxdURQiWLCLvbHej0QPjQIHFjAFjdeGhJd2Y8NgTW1wcExq45Sb7LMlOGvtGMjSQuc8QazwXUxpZrQbIxgSQUTmzQO1x30xaZ2Us6TQTab7Wpya6OgAX.emKOM3phfS5kfhYj9FLQ.qi32sFNWnAoFdVK596OTP2F63PAJOVM5qPsM2jIAbJylIBmnj94LO7hOVr3KOS6XLtCPRn2Oe X-Originating-IP: [67.207.137.114] Authentication-Results: mta1055.mail.mud.yahoo.com from=theeggeadventure.com; domainkeys=pass (ok); from=theeggeadventure.com; dkim=pass (ok) Received: from 127.0.0.1 (EHLO mail.theeggeadventure.com) (67.207.137.114) by mta1055.mail.mud.yahoo.com with SMTP; Sat, 20 Mar 2010 05:29:19 -0700 Received: by mail.theeggeadventure.com (Postfix, from userid 1003) id BB5B01C16A4; Sat, 20 Mar 2010 12:29:16 +0000 (UTC) DomainKey-Signature: a=rsa-sha1; s=2010; d=theeggeadventure.com; c=simple; q=dns; b=JHbK9VhqyQTfpQFqaXxJrKpEG9h9H0IZ0LdWoBooJEA7hv3SYWmFUtyE247EuwoaG gzApKJ1DuRhwESZ7PswrbzuaUL8poAUO8LmMvZ+OqnDolgNSJUYWu0FcO+fe3H4m9ZD grkj0xMpHw+uFjXV4plKO+sa8olJXJAmP+9cMEo= X-DKIM: Sendmail DKIM Filter v2.8.2 mail.theeggeadventure.com BB5B01C16A4 DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=theeggeadventure.com; s=2010; t=1269088156; bh=bUlMldcnzFCmCmNT8qjpRl6fiY1YyjiZiC9jhCXASOw=; h=Subject:To:Message-Id:Date:From; b=EVNolTlh4Gch5/HIrrHaRQvcApl7wkB42gB44NsPcLZD2QrhuOvnhanhnEB4UbV0e A+3dAOjhX7LKzgGrn11jXNTiEjNX1vQDsX3HyG0fNra73aWiGTzr1nHJfnuEJ7Ph0j 5tp0HRL5jjikD1XJcvmsYzTpT22mxuz60HXYRB1s= Subject: cron To: <brianegge at yahoo.com> X-Mailer: mail (GNU Mailutils 1.2) Message-Id: <[email protected]> Date: Sat, 20 Mar 2010 12:29:16 +0000 (UTC) From: This sender is DomainKeys verified [email protected] (domains) View contact details Content-Length: 818 When I send to gmail, I see the following in my server log, but the message doesn't even reach my spam folder. Mar 20 12:59:12 Everest postfix/pickup[27802]: C81C61C16A4: uid=1000 from=<egge> Mar 20 12:59:12 Everest postfix/cleanup[27847]: C81C61C16A4: message-id=<[email protected]> Mar 20 12:59:13 Everest postfix/qmgr[27801]: C81C61C16A4: from=<[email protected]>, size=2784, nrcpt=1 (queue active) Mar 20 12:59:14 Everest postfix/smtp[27849]: C81C61C16A4: to=<brianegge at gmail.com>, relay=gmail-smtp-in.l.google.com[209.85.223.24]:25, delay=2.1, delays=0.39/0.28/0.13/1.3, dsn=2.0.0, status=sent (250 2.0.0 OK 1269089954 32si4566750iwn.51) Mar 20 12:59:14 Everest postfix/qmgr[27801]: C81C61C16A4: removed I've send to email to test services, and the report everything verifies ok. I've also checked all the RBL lists, and I'm not on any of them.

  Read the article

• ESXi 5.1 ghettoVCB stuck at Clone: 10% done

  - by stormdrain

  Trying to run ghettoVCB for the first time here. I am using a NAS that is set up as a datastore on the host. I did a dry run and it completed without error. The VM is ~500GB and there is only one on the host that I'm trying to backup. I proceeded to start the actual backup: ./ghettoVCB.sh -m vmname -g ghettoVCB.conf It goes though the config and looks like it's taking off: 2013-10-24 11:43:19 -- info: CONFIG - USING GLOBAL GHETTOVCB CONFIGURATION FILE = ghettoVCB.conf 2013-10-24 11:43:19 -- info: CONFIG - VERSION = 2013_01_11_0 2013-10-24 11:43:19 -- info: CONFIG - GHETTOVCB_PID = 17398616 2013-10-24 11:43:19 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/nas2tb-001/esxi4 2013-10-24 11:43:19 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3 2013-10-24 11:43:19 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2013-10-24_11-43-18 2013-10-24 11:43:19 -- info: CONFIG - DISK_BACKUP_FORMAT = thin 2013-10-24 11:43:19 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2013-10-24 11:43:19 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2013-10-24 11:43:19 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4 2013-10-24 11:43:19 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2013-10-24 11:43:19 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2013-10-24 11:43:19 -- info: CONFIG - LOG_LEVEL = info 2013-10-24 11:43:19 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2013-10-24_11-43-18-17398616.log 2013-10-24 11:43:19 -- info: CONFIG - ENABLE_COMPRESSION = 0 2013-10-24 11:43:19 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2013-10-24 11:43:19 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2013-10-24 11:43:19 -- info: CONFIG - ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP = 0 2013-10-24 11:43:19 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all 2013-10-24 11:43:19 -- info: CONFIG - VM_SHUTDOWN_ORDER = 2013-10-24 11:43:19 -- info: CONFIG - VM_STARTUP_ORDER = 2013-10-24 11:43:19 -- info: CONFIG - EMAIL_LOG = 0 2013-10-24 11:43:19 -- info: 2013-10-24 11:43:22 -- info: Initiate backup for vmname 2013-10-24 11:43:22 -- info: Creating Snapshot "ghettoVCB-snapshot-2013-10-24" for serv2 Destination disk format: VMFS thin-provisioned Cloning disk '/vmfs/volumes/esxi4-storage/vmname/vmname_1.vmdk'... Clone: 10% done. and it's been that way for over an hour now. Stuck at Clone: 10% done.. Thing is: I can see the vmdk on the NAS. And it looks like almost the whole thing is there. On the NAS it's showing ~430GB but on vSphere Client Summary is shows as 507GB. I don't see the vmdk on the NAS growing any more. The logfile mimics some of the above and is sitting at "Creating Snapshot..." and nothing else is coming in. Is the vmdk on the NAS showing all those GB because of the provisioning or something? i.e. is the size of the file not necessarily indicative of the amount of actual data that has been copied? Is there are reason it might be "Stuck" at 10%? i.e. could it really be taking this long? Any other tips? Thanks. Edit: as soon as I hit the Submit button, I glance over to see that it has incremented to 11% done. Good to know it'll be complete sometime around when the sun explodes.

  Read the article

• Old operational master still thinks it is the "one"

  - by Doug

  Hi there, I have a domain with 3 AD servers for now i'll just call them: AD01 (Win 2008 GC, Operations master) AD02 (Win 2008 GC) AD03 (Win 2003 GC) A couple of months there was some hardware issues with AD01 so the operations master, PDC and Infrastructure Master was moved to AD02. All machines where on while this was happening. AD01 (Win 2008 GC) AD02 (Win 2008 GC, Operations master) AD03 (Win 2003 GC) AD01 was then shutdown for a month. Upon starting this machine up with replaced hardware (NIC and RAID card) i now have a weird problem. AD01 Thinks it is operations master still in AD on the local box AD02 & AD03 Thinks AD02 is operations master in AD on both boxes When running DCDIAG on AD01 i get a number of issues (listed below) When running "dcdiag /test:advertising" on AD01: Doing primary tests Testing server: Default-First-Site-Name\AD01 Starting test: Advertising Warning: DsGetDcName returned information for \\ad02.domain.local, when we were trying to reach AD01. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... AD01 failed test Advertising Running partition tests on : ForestDnsZones Running partition tests on : DomainDnsZones Running partition tests on : Schema Running partition tests on : Configuration Running partition tests on : domain Running enterprise tests on : domain.local When running "dcdiag" on AD01 i get the following errors (excerpt of the Final output): Testing server: Default-First-Site-Name\AD01 Starting test: Advertising Warning: DsGetDcName returned information for \\ad02.domain.local, when we were trying to reach AD01. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... AD01 failed test Advertising Starting test: FrsEvent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=domain,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=domain,DC=local Starting test: Replications [Replications Check,Replications Check] Inbound replication is disabled. To correct, run "repadmin /options AD01 -DISABLE_INBOUND_REPL" [Replications Check,AD01] Outbound replication is disabled. To correct, run "repadmin /options AD01 -DISABLE_OUTBOUND_REPL" So the problem appeasr to be that when i moved the operations master, AD01 never got the memo, and now that it's started up, all the other AD servers don't think its the boss anymore when it trys to replicate etc. So i really need to manually update AD01 so that it knows who the operations master, instrastructure and PDC is - but i'm not having any luck I've been googling for nearly a day and all solutions lead to "the cake is a lie" Your ninja skills will be greatly appreciated

  Read the article

• tproxy squid bridge very slow when cache is full

  - by Roberto

  I have installed a bridge tproxy proxy in a fast server with 8GB ram. The traffic is around 60Mb/s. When I start for first time the proxy (with the cache empty) the proxy works very well but when the cache becomes full (few hours later) the bridge goes very slow, the traffic goes below 10Mb/s and the proxy server becomes unusable. Any hints of what may be happening? I'm using: linux-2.6.30.10 iptables-1.4.3.2 squid-3.1.1 compiled with these options: ./configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --localstatedir=/var/lib --sysconfdir=/etc/squid --libexecdir=/usr/libexec/squid --localstatedir=/var --datadir=/usr/share/squid --enable-removal-policies=lru,heap --enable-icmp --disable-ident-lookups --enable-cache-digests --enable-delay-pools --enable-arp-acl --with-pthreads --with-large-files --enable-htcp --enable-carp --enable-follow-x-forwarded-for --enable-snmp --enable-ssl --enable-async-io=32 --enable-linux-netfilter --enable-epoll --disable-poll --with-maxfd=16384 --enable-err-languages=Spanish --enable-default-err-language=Spanish My squid.conf: cache_mem 100 MB memory_pools off acl manager proto cache_object acl localhost src 127.0.0.1/32 acl localhost src ::1/128 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 acl to_localhost dst ::1/128 acl localnet src 10.0.0.0/8 # RFC1918 possible internal network acl localnet src 172.16.0.0/12 # RFC1918 possible internal network acl localnet src 192.168.0.0/16 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl net-g1 src xxx.xxx.xxx.xxx/24 acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow net-g1 from where browsing should be allowed http_access allow localnet http_access allow localhost http_access deny all http_port 3128 http_port 3129 tproxy hierarchy_stoplist cgi-bin ? cache_dir ufs /var/spool/squid 8000 16 256 access_log none cache_log /var/log/squid/cache.log coredump_dir /var/spool/squid refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . I have this issue when the cache is full, but do not really know if it is because of that. Thanks in advance and sorry my english. roberto

  Read the article

• BAD DC transfering FSMO Roles to ADC

  - by Suleman

  I have a DC (FQDN:server.icmcpk.local) and an ADC (FQDN:file-server.icmcpk.local). Recently my DC is facing a bad sector problem so I changed the Operation Masters to file-server for all five roles. but when ever i turn off the OLD DC the file-server also stops wroking with AD and GPMC further i m also unable to join any other computer to this domain. For Test purpose i also added a new ADC (FQDN:wds-server.icmcpk.local) but no succes with the old DC off i had to turn the old DC on and then joined it. I m attaching the Dcdiags for all three servers. Kindly help me so that i b able to reinstall new HDD and it can go online again. --------------------------------------- Server --------------------------------------- C:\Program Files\Support Tools>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\SERVER Starting test: Connectivity ......................... SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\SERVER Starting test: Replications [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: DC=ForestDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=ForestDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: DC=DomainDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=DomainDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: CN=Schema,CN=Configuration,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: CN=Schema,CN=Configuration,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. ......................... SERVER passed test Replications Starting test: NCSecDesc ......................... SERVER passed test NCSecDesc Starting test: NetLogons ......................... SERVER passed test NetLogons Starting test: Advertising ......................... SERVER passed test Advertising Starting test: KnowsOfRoleHolders ......................... SERVER passed test KnowsOfRoleHolders Starting test: RidManager ......................... SERVER passed test RidManager Starting test: MachineAccount ......................... SERVER passed test MachineAccount Starting test: Services ......................... SERVER passed test Services Starting test: ObjectsReplicated ......................... SERVER passed test ObjectsReplicated Starting test: frssysvol ......................... SERVER passed test frssysvol Starting test: frsevent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. ......................... SERVER failed test frsevent Starting test: kccevent ......................... SERVER passed test kccevent Starting test: systemlog An Error Event occured. EventID: 0x80001778 Time Generated: 05/04/2012 14:05:39 Event String: The previous system shutdown at 1:26:31 PM on An Error Event occured. EventID: 0x825A0011 Time Generated: 05/04/2012 14:07:45 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:13:40 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:25 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:25 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:38 (Event String could not be retrieved) An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:16:14 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:16:14 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0x825A0011 Time Generated: 05/04/2012 14:22:57 (Event String could not be retrieved) An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:22:59 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:22:59 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Generate Activation Context failed for ......................... SERVER failed test systemlog Starting test: VerifyReferences ......................... SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : icmcpk Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Running enterprise tests on : icmcpk.local Starting test: Intersite ......................... icmcpk.local passed test Intersite Starting test: FsmoCheck ......................... icmcpk.local passed test FsmoCheck ---------------------- File-Server ---------------------- C:\Users\Administrator.ICMCPK>dcdiag Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = FILE-SERVER * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\FILE-SERVER Starting test: Connectivity ......................... FILE-SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\FILE-SERVER Starting test: Advertising Warning: DsGetDcName returned information for \\Server.icmcpk.local, when we were trying to reach FILE-SERVER. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... FILE-SERVER failed test Advertising Starting test: FrsEvent ......................... FILE-SERVER passed test FrsEvent Starting test: DFSREvent ......................... FILE-SERVER passed test DFSREvent Starting test: SysVolCheck ......................... FILE-SERVER passed test SysVolCheck Starting test: KccEvent ......................... FILE-SERVER passed test KccEvent Starting test: KnowsOfRoleHolders ......................... FILE-SERVER passed test KnowsOfRoleHolders Starting test: MachineAccount ......................... FILE-SERVER passed test MachineAccount Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=icmcpk,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=icmcpk,DC=local ......................... FILE-SERVER failed test NCSecDesc Starting test: NetLogons Unable to connect to the NETLOGON share! (\\FILE-SERVER\netlogon) [FILE-SERVER] An net use or LsaPolicy operation failed with error 67, The network name cannot be found.. ......................... FILE-SERVER failed test NetLogons Starting test: ObjectsReplicated ......................... FILE-SERVER passed test ObjectsReplicated Starting test: Replications ......................... FILE-SERVER passed test Replications Starting test: RidManager ......................... FILE-SERVER passed test RidManager Starting test: Services ......................... FILE-SERVER passed test Services Starting test: SystemLog An Error Event occurred. EventID: 0x00000469 Time Generated: 05/04/2012 14:01:10 Event String: The processing of Group Policy failed because of lack of network con nectivity to a domain controller. This may be a transient condition. A success m essage would be generated once the machine gets connected to the domain controll er and Group Policy has succesfully processed. If you do not see a success messa ge for several hours, then contact your administrator. An Warning Event occurred. EventID: 0x8000A001 Time Generated: 05/04/2012 14:07:11 Event String: The Security System could not establish a secured connection with th e server ldap/icmcpk.local/[email protected]. No authentication protocol was available. An Warning Event occurred. EventID: 0x00000BBC Time Generated: 05/04/2012 14:30:34 Event String: Windows Defender Real-Time Protection agent has detected changes. Mi crosoft recommends you analyze the software that made these changes for potentia l risks. You can use information about how these programs operate to choose whet her to allow them to run or remove them from your computer. Allow changes only if you trust the program or the software publisher. Windows Defender can't undo changes that you allow. An Warning Event occurred. EventID: 0x00000BBC Time Generated: 05/04/2012 14:30:36 Event String: Windows Defender Real-Time Protection agent has detected changes. Mi crosoft recommends you analyze the software that made these changes for potentia l risks. You can use information about how these programs operate to choose whet her to allow them to run or remove them from your computer. Allow changes only if you trust the program or the software publisher. Windows Defender can't undo changes that you allow. ......................... FILE-SERVER failed test SystemLog Starting test: VerifyReferences ......................... FILE-SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : icmcpk Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Running enterprise tests on : icmcpk.local Starting test: LocatorCheck ......................... icmcpk.local passed test LocatorCheck Starting test: Intersite ......................... icmcpk.local passed test Intersite --------------------- WDS-Server --------------------- C:\Users\Administrator.ICMCPK>dcdiag Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = WDS-SERVER * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\WDS-SERVER Starting test: Connectivity ......................... WDS-SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\WDS-SERVER Starting test: Advertising Warning: DsGetDcName returned information for \\Server.icmcpk.local, when we were trying to reach WDS-SERVER. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... WDS-SERVER failed test Advertising Starting test: FrsEvent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. ......................... WDS-SERVER passed test FrsEvent Starting test: DFSREvent ......................... WDS-SERVER passed test DFSREvent Starting test: SysVolCheck ......................... WDS-SERVER passed test SysVolCheck Starting test: KccEvent ......................... WDS-SERVER passed test KccEvent Starting test: KnowsOfRoleHolders ......................... WDS-SERVER passed test KnowsOfRoleHolders Starting test: MachineAccount ......................... WDS-SERVER passed test MachineAccount Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=icmcpk,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=icmcpk,DC=local ......................... WDS-SERVER failed test NCSecDesc Starting test: NetLogons Unable to connect to the NETLOGON share! (\\WDS-SERVER\netlogon) [WDS-SERVER] An net use or LsaPolicy operation failed with error 67, The network name cannot be found.. ......................... WDS-SERVER failed test NetLogons Starting test: ObjectsReplicated ......................... WDS-SERVER passed test ObjectsReplicated Starting test: Replications ......................... WDS-SERVER passed test Replications Starting test: RidManager ......................... WDS-SERVER passed test RidManager Starting test: Services ......................... WDS-SERVER passed test Services Starting test: SystemLog An Error Event occurred. EventID: 0x0000041E Time Generated: 05/04/2012 14:02:55 Event String: The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name Sysytem (DNS) is configured and working correctly. An Error Event occurred. EventID: 0x0000041E Time Generated: 05/04/2012 14:08:33 Event String: The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name Sysytem (DNS) is configured and working correctly. ......................... WDS-SERVER failed test SystemLog Starting test: VerifyReferences ......................... WDS-SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : icmcpk Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Running enterprise tests on : icmcpk.local Starting test: LocatorCheck ......................... icmcpk.local passed test LocatorCheck Starting test: Intersite ......................... icmcpk.local passed test Intersite

  Read the article

• Best Practise: DNS and VPN (with private network IPs)

  - by ribx

  I am trying to find the best solution for my DNS problem. We are running several services in our company that you can reach only over VPN. Other services, that are reachable through the internet got the domain ... At the moment all services inside the VPN network go by .local... These have an VPN IP of the private network 192.168.252.0/24. Clients reach from Linux over OSX to Windows. I can think of 4 possibilities to implement a DNS infrastructure: Most common: an internal DNS Server, that is pushed by the VPN. But this has several drawbacks: your DNS responses are limited to the speed of the VPN Connection and your own DNS server. Because of very complex websites, this can increase the time for a page to load quite a lot. Also: we have several VPNs that are not connected to each other and all of them have their own DNS server. Several DNS servers locally. These have to be configured by hand. And you have to use some third party tool like dnsmasq. If you start a DNS request, you ask your locally running DNS server, which decides which server to ask for which domain name. One college of mine uses such a solution with this OSX (I am sorry, I don't remember the name of the application). You use your domain hoster. Most of them have APIs available to manipulate your DNS entries. So you could pull your private network informations to your domain hoster. I am not sure whether they all accept private network IPs. But I guess there will be some problems in the same way as in number 4. The one we currently use, because it's for us the most logical choice: we forward the sub domain *.local.. to our own public DNS Server. This works quite good for some public DNS Servers like Google. But most ISPs do not forward the answers. Or don't do that always. Like my ISP sends me a positive result of the a DNS request of a *.local.. domain only every 10th time I make a nslookup. (Can someone explain this?) Here the real Question: Is there another solution we were not thinking about? Or: What of these methods do you use?

  Read the article

• Cannot run a VM with more than three network interfaces with KVM

  - by Bostonvaulter

  I'm running KVM on top of Ubuntu 10.10 Server I can create VM's (Virtual Machine) and network interfaces fine but I cannot seem to add more than three network interfaces. As soon as I have a VM with four network interfaces it gets stuck on startup at the starting SeaBIOS page with this message: Starting SeaBIOS (version pre-0.6.1-20100702_143500-palmer) So far I've verified this with two VM's, a Ubuntu 10.10 desktop and a Vyatta router. The specific network hardware I assign to the VM's doesn't seem to matter. I'm trying to have one bridged interface and three private networks using Vyatta to route between them. Does anyone know why I can't run a VM with more than three network interfaces? Edit: Additionally the KVM thread responsible for the specific VM hangs using ~100% CPU (i.e. one core). Here's the command for the process that is hanging: /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 512 -smp 1,sockets=1,cores=1,threads=1 -name vyatta -uuid 6dff7c94-6810-423e-5fea-fec10da0e9b7 -nodefaults -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/vyatta.monitor,server,nowait -mon chardev=monitor,mode=readline -rtc base=utc -boot c -drive file=/home/rams/virtual-machines/vyatta.img,if=none,id=drive-ide0-0-0,boot=on,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -device rtl8139,vlan=0,id=net0,mac=00:54:00:be:cc:4b,bus=pci.0,addr=0x3 -net tap,fd=97,vlan=0,name=hostnet0 -device rtl8139,vlan=1,id=net1,mac=52:54:00:da:59:ed,bus=pci.0,addr=0x5 -net tap,fd=98,vlan=1,name=hostnet1 -device rtl8139,vlan=2,id=net2,mac=52:54:00:ce:22:b6,bus=pci.0,addr=0x6 -net tap,fd=99,vlan=2,name=hostnet2 -device rtl8139,vlan=3,id=net3,mac=52:54:00:1e:bc:46,bus=pci.0,addr=0x7 -net tap,fd=101,vlan=3,name=hostnet3 -chardev pty,id=serial0 -device isa-serial,chardev=serial0 -usb -vnc 127.0.0.1:0 -k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 Edit: I've also found an error in dmesg that might be related (it also shows up when running virtd in verbose mode): 14:47:24.399: warning : qemudParsePCIDeviceStrs:1422 : Unexpected exit status '1', qemu probably failed I've also tried disabling app armor but that doesn't seem to make a difference.

  Read the article

• MySQL daemon keeps terminating unexpectedly

  - by Yehia A.Salam

  The MySQL daemon on my CentOS server keeps crashing, i got the logs from /var/logs/mysqld but still i am not sure how to fix this: 121114 16:22:56 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended 121114 21:55:11 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121114 21:55:11 [Note] Plugin 'FEDERATED' is disabled. 121114 21:55:11 InnoDB: The InnoDB memory heap is disabled 121114 21:55:11 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121114 21:55:11 InnoDB: Compressed tables use zlib 1.2.3 121114 21:55:11 InnoDB: Using Linux native AIO 121114 21:55:11 InnoDB: Initializing buffer pool, size = 128.0M 121114 21:55:11 InnoDB: Completed initialization of buffer pool 121114 21:55:11 InnoDB: highest supported file format is Barracuda. InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 121114 21:55:11 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 121114 21:55:12 InnoDB: Waiting for the background threads to start 121114 21:55:13 InnoDB: 1.1.6 started; log sequence number 77177262 121114 21:55:13 [Note] Event Scheduler: Loaded 0 events 121114 21:55:13 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.5.12' socket: '/var/lib/mysql/mysql.sock' port: 3306 MySQL Community Server (GPL) by Remi 121115 00:19:44 mysqld_safe Number of processes running now: 0 121115 00:19:44 mysqld_safe mysqld restarted 121115 0:19:47 [Note] Plugin 'FEDERATED' is disabled. 121115 0:19:47 InnoDB: The InnoDB memory heap is disabled 121115 0:19:47 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121115 0:19:47 InnoDB: Compressed tables use zlib 1.2.3 121115 0:19:47 InnoDB: Using Linux native AIO 121115 0:19:47 InnoDB: Initializing buffer pool, size = 128.0M InnoDB: mmap(137363456 bytes) failed; errno 12 121115 0:19:47 InnoDB: Completed initialization of buffer pool 121115 0:19:47 InnoDB: Fatal error: cannot allocate memory for the buffer pool 121115 0:19:47 [ERROR] Plugin 'InnoDB' init function returned error. 121115 0:19:47 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 121115 0:19:47 [ERROR] Unknown/unsupported storage engine: InnoDB 121115 0:19:47 [ERROR] Aborting Edit #1 total used free shared buffers cached Mem: 496 370 126 0 24 110 -/+ buffers/cache: 234 261 Swap: 1023 9 1014 Edit #2 Also, largest table in my mysql is 20MB, so my the memory used should be pretty moderate. SELECT CONCAT(table_schema, '.', table_name), CONCAT(ROUND(table_rows / 1000000, 2), 'M') rows, CONCAT(ROUND(data_length / ( 1024 * 1024 * 1024 ), 2), 'G') DATA, CONCAT(ROUND(index_length / ( 1024 * 1024 * 1024 ), 2), 'G') idx, CONCAT(ROUND(( data_length + index_length ) / ( 1024 * 1024 * 1024 ), 2), 'G') total_size, ROUND(index_length / data_length, 2) idxfrac FROM information_schema.TABLES ORDER BY data_length + index_length DESC LIMIT 10;

  Read the article

• How to change mouse pointer icon in Xfce Debian 7 Wheezy?

  - by kadaj

  I copied the cursor theme (oxy-neon or Oxygen Neon) to /usr/share/icons and from Applications Menu - Settings - Mouse, I am able to see the new theme. I clicked on it and the pointer doesn't change. However the text typing icon ('I'), busy icon, hand icon, and resize window icons got changed. The pointer icon remains the same, the black Adwaita. I removed the Adwaita folder from the icons folder, and still the mouse pointer doesn't change. Is the pointer theme specified elsewhere? I have no setting under home directory. I tried logging out, restart, restarting xfwm4, but nothing works. I just found that the icon pointer changes when the pointer is inside Firefox, but it's not consistent. It keeps changing when I click menu items. Very weird. Any idea how to fix this? This is the output of running: gsettings list-recursively org.gnome.desktop.interface : ~$ gsettings list-recursively org.gnome.desktop.interface org.gnome.desktop.interface automatic-mnemonics true org.gnome.desktop.interface buttons-have-icons false org.gnome.desktop.interface can-change-accels false org.gnome.desktop.interface clock-format '24h' org.gnome.desktop.interface clock-show-date false org.gnome.desktop.interface clock-show-seconds false org.gnome.desktop.interface cursor-blink true org.gnome.desktop.interface cursor-blink-time 1200 org.gnome.desktop.interface cursor-blink-timeout 10 org.gnome.desktop.interface cursor-size 24 org.gnome.desktop.interface cursor-theme 'Adwaita' org.gnome.desktop.interface document-font-name 'Sans 11' org.gnome.desktop.interface enable-animations true org.gnome.desktop.interface font-name 'Cantarell 11' org.gnome.desktop.interface gtk-color-palette 'black:white:gray50:red:purple:blue:light blue:green:yellow:orange:lavender:brown:goldenrod4:dodger blue:pink:light green:gray10:gray30:gray75:gray90' org.gnome.desktop.interface gtk-color-scheme '' org.gnome.desktop.interface gtk-im-module '' org.gnome.desktop.interface gtk-im-preedit-style 'callback' org.gnome.desktop.interface gtk-im-status-style 'callback' org.gnome.desktop.interface gtk-key-theme 'Default' org.gnome.desktop.interface gtk-theme 'Adwaita' org.gnome.desktop.interface gtk-timeout-initial 200 org.gnome.desktop.interface gtk-timeout-repeat 20 org.gnome.desktop.interface icon-theme 'gnome' org.gnome.desktop.interface menubar-accel 'F10' org.gnome.desktop.interface menubar-detachable false org.gnome.desktop.interface menus-have-icons false org.gnome.desktop.interface menus-have-tearoff false org.gnome.desktop.interface monospace-font-name 'Monospace 11' org.gnome.desktop.interface show-input-method-menu true org.gnome.desktop.interface show-unicode-menu true org.gnome.desktop.interface text-scaling-factor 1.0 org.gnome.desktop.interface toolbar-detachable false org.gnome.desktop.interface toolbar-icons-size 'large' org.gnome.desktop.interface toolbar-style 'both-horiz' org.gnome.desktop.interface toolkit-accessibility false ~$

  Read the article

• Nameserver not resolving or domain not pingable [closed]

  - by Ricky

  Sorry, if anyone can think of a better title please change it! I want to host my own websites from home. For testing purposes, I have a virtual machine running a trial version of Windows Server 2008 Enterprise. Note I currently run a VPS and host my own websites but due to a nice speed upgrade on our line I now want to host from home. I have several domains but I wanted to test with one, that is rickyoleary.com. Our ISP does not provide static IP addresses unless we have a business account so I've been looking at no-ip.com. I admit my networking isn't the best, hence this question but I've been bashing my head all day on this one. I created a host name, muffinbubble.no-ip.org which runs on IP: 86.148.124.15. I've setup IIS on the server with a simple test page. I've then forwarded port 80 traffic from the router and from what I can see, it's working. If I access my website (I was unable to link to this for some reason so please copy and paste this) - http://86.148.124.15/ - I see my test page. So the next step was to create my nameservers. This domain is with namecheap.com so I created my nameservers, ns1.rickyoleary.com and ns2.rickyoleary.com. Both these point to the same IP (and yes, that will be changed after testing), the same IP as above: 86.148.124.15. On the server itself I have set up DNS entries as below which I believe to be correct and added rickyoleary.com and www.rickyoleary.com in the host headers (or bindings) in IIS 7.0. If I try and look up my domain, rickyoleary.com it shows ns1.rickyoleary.com and ns2.rickyoleary.com as the nameservers. I then tried to use just-ping.com on my nameserver ns1.rickyoleary.com. I get 100% packets lost, but the correct IP address is returned (I'm guessing the router does not allow pings, but is still accessible...). I get no response when pinging rickyoleary.com. Here's the problems: I cannot ping ns1.rickyoleary.com or ns2.rickyoleary.com from a command prompt. I'm not sure if this is an issue. When I added the nameservers in Windows Server 2008 and clicked 'resolve' a message box displays stating "No such host is known". I cannot ping rickyoleary.com. rickyoleary.com is not showing my test page on my server. Now - please note, I've waited around 6 hours for propagation. From my experience, although you're told to wait 24 - 48 hours, the changes are normally pretty quick so perhaps I'm being impatient or naive to think it should all be working fine until then. I would really appreciate some help here. Thanks.

  Read the article

• custom route not working on windows

  - by Michael Closson

  My windows laptop is directly connected to 192.168.1.0/24 (wireless lan). I access 10.21.0.0/16 though a router that is connected to both networks. The routing works fine with this configuration. I have a VPN, that connects to 10.0.0.0/8. The VPN network doesn't actually use any IPs in the 10.21.0.0/16 range. So I should be able to configure my routing table to route all the 10.21.0.0/16 IPs through the wireless lan, and all other 10.0.0.0/8 through the VPN. My understanding is that I can do this if the metric for the 10.21.0.0 is lower than that of the 10.0.0.0. The VPN (10.0.0.0) is automatically assigned metric 20. I have manually assigned the WLAN a metric of 1. I manually add an entry to the routing table with this command: route add 10.21.0.0 mask 255.255.0.0 192.168.1.201 metric 1 The route is then assigned a metric of 2 (which is expected). The problem is that it doesn't work. I can't ping any machine on the 10.21.0.0 network. But I can access other stuff on the 10.0.0.0. I can also access stuff on the 192.168.1.0. To debug this i've done the following. Run tcpdump on the router (192.168.1.201). I can verify that no packets for 10.21.0.0 arrive on that interface. Disable iptables on the router. Disable the windows firewall. Run wireshark on my laptop, to try and see which interface the ping requests go to. But I can't see them go anywhere!! The ping command doesn't receive any 'destination unreachable' messages. Here is the relevant section of the routing table. IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.201 192.168.1.18 2 10.0.0.0 255.0.0.0 On-link 10.55.44.203 20 10.21.0.0 255.255.0.0 192.168.1.201 192.168.1.18 2

  Read the article

• pfSense 2.1 OpenVPN client not using tunnelled interface

  - by Brian M. Hunt

  I'm having some trouble getting OpenVPN working on my pfSense box. The issue is quite strange to me. When I have the OpenVPN turned on, only my router is able to connect to the Internet. From the router I can use ping, links, etc., and connections work exactly as expected - through the VPN, with the IP address assigned by my VPN provider (Proxy.sh, incidentally). However, none of the clients on the local network can connect to the Internet. I get timeouts when using ping or a web browser. I can ping my router, and the IP address of the gateway. When I switch the default gateway from the VPN to my ISP's gateway, all works exactly as expected. Here the routing table (netstat -r) when in VPN mode, and a key for it: IPv4 Destination Gateway Flags Refs Use Mtu Netif Expire 0.0.0.0/1 10.XX.X.53 UGS 0 122 1500 ovpnc1 = default 10.XX.X.53 UGS 0 235 1500 ovpnc1 8.8.8.8 10.XX.X.53 UGHS 0 82 1500 ovpnc1 10.XX.X.1/32 10.11.0.53 UGS 0 0 1500 ovpnc1 10.XX.X.53 link#12 UH 0 0 1500 ovpnc1 10.XX.X.54 link#12 UHS 0 0 16384 lo0 ZZ.XX.XXX.0/20 link#1 U 0 83 1500 re0 ZZ.XX.XXX.XXX link#1 UHS 0 0 16384 lo0 127.0.0.1 link#9 UH 0 12 16384 lo0 128.0.0.0/1 10.11.0.53 UGS 0 123 1500 ovpnc1 192.168.1.0/24 link#11 U 0 1434 1500 ue0 192.168.1.1 link#11 UHS 0 0 16384 lo0 YYY.YYY.YYY.YYY/32 ZZ.XX.XXX.1 UGS 0 249 1500 re0 IP addresses 10.XX.X.53/54 - My DHCP-assigned IP address/pair from the VPN provider ZZ.XX.XXX.XXX - My external IP assigned by my ISP YYY.YYY.YYY.YYY - The external IP assigned by the VPN provider Interfaces ovpnc1 - My VPN client interface re0 - My LAN interface ue0 - My WAN interface This looks essentially what I would expect it to be. The default route is through the VPN provider. The VPN address is routed through the ISP-assigned IP address. I am not sure what would be wrong here. So figuring this was a firewall issue, I basically tried enabling all in/out traffic. This did not seem to remedy the problem. Also figuring it could possibly be some client networking issue, I restarted the clients on the LAN. This did not help. I also ran route flush and reset the routes manually. So I am a bit stumped, and would be very grateful for any thoughts on what the problem might be.

  Read the article

• Need to increase nginx throughput to an upstream unix socket -- linux kernel tuning?

  - by Ben Lee

  I am running an nginx server that acts as a proxy to an upstream unix socket, like this: upstream app_server { server unix:/tmp/app.sock fail_timeout=0; } server { listen ###.###.###.###; server_name whatever.server; root /web/root; try_files $uri @app; location @app { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto $scheme; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://app_server; } } Some app server processes, in turn, pull requests off /tmp/app.sock as they become available. The particular app server in use here is Unicorn, but I don't think that's relevant to this question. The issue is, it just seems that past a certain amount of load, nginx can't get requests through the socket at a fast enough rate. It doesn't matter how many app server processes I set up, it doesn't even matter what the app is (tried it with a dummy app with just a single endpoint that returned an empty page with status 404). The bottleneck seems to be the socket, not the app. I'm getting a flood of these messages in the nginx error log: connect() to unix:/tmp/app.sock failed (11: Resource temporarily unavailable) while connecting to upstream Many requests result in status code 502, and those that don't take a long time to complete. The nginx write queue stat hovers around 1000. Anyway, I feel like I'm missing something obvious here, because this particular configuration of nginx and app server is pretty common, especially with Unicorn (it's the recommended method in fact). Are there any linux kernel options that needs to be set, or something in nginx? Any ideas about how to increase the throughput to the upstream socket? Something that I'm clearly doing wrong? Additional information on the environment: $ uname -a Linux app1 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ ruby -v ruby 1.9.3p194 (2012-04-20 revision 35410) [x86_64-linux] $ unicorn -v unicorn v4.3.1 $ nginx -V nginx version: nginx/1.2.1 built by gcc 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) TLS SNI support enabled Current kernel tweaks: net.core.rmem_default = 65536 net.core.wmem_default = 65536 net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.ipv4.tcp_rmem = 4096 87380 16777216 net.ipv4.tcp_wmem = 4096 65536 16777216 net.ipv4.tcp_mem = 16777216 16777216 16777216 net.ipv4.tcp_window_scaling = 1 net.ipv4.route.flush = 1 net.ipv4.tcp_no_metrics_save = 1 net.ipv4.tcp_moderate_rcvbuf = 1 net.core.somaxconn = 8192 net.netfilter.nf_conntrack_max = 131072

  Read the article

• Android emulator performance on linux

  - by Rado

  I installed the android SDK and eclipse plugin on my laptop, but I was surprised to find out that the emulator eats up 100% of one of my cpu cores. I have exactly the same setup on a desktop machine that does not have this issue. Both computers are running arch linux and both were updated yesterday. Granted, the desktop has better hardware than the laptop, but I was expecting to get closer to 50% cpu usage than 100% on the laptop. Both android virtual devices have the same specs: CPU: ARM Target: Android 2.3.3 - API Level 10 Skin: WVGA800 SD Card: 512M hw.lcd.density: 240 vm.heapSize: 24 hw.ramSize: 256 Laptop host has Intel Core 2 T7200 @ 2GHz cpu with 2Gb RAM. Desktop host has AMD Phenom II X4 940 @ 3GHz cpu with 8Gb RAM. The android emulator uses only 1 core and here are the CPU usage results: Laptop: Cpu0 : 22.8%us, 76.5%sy, 0.0%ni, 0.3%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st Cpu1 : 11.2%us, 2.4%sy, 0.0%ni, 86.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2055484k total, 1860304k used, 195180k free, 5276k buffers Swap: 2000088k total, 106872k used, 1893216k free, 350780k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2026 xyz 20 0 396m 207m 7192 R 100 10.3 4:11.58 emulator-arm Desktop: Cpu0 : 0.7%us, 0.0%sy, 0.0%ni, 99.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu1 : 1.3%us, 0.0%sy, 0.0%ni, 98.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 : 5.0%us, 1.3%sy, 0.0%ni, 91.9%id, 1.7%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 0.3%us, 0.3%sy, 0.0%ni, 99.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 7666324k total, 6506808k used, 1159516k free, 1650960k buffers Swap: 8988348k total, 0k used, 8988348k free, 2867300k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2811 xyz 20 0 392m 220m 6276 S 8 2.9 0:33.58 emulator-arm Is there any way I can improve the emulator performance on the laptop? [UPDATE] I ran the emulator with the same settings, on the same laptop under Win7 and after starting up, it didn't use 100% of a CPU core unlike under linux. Also, I tried running the emulator from a terminal in Linux and I get this message when I don't get it under the desktop Linux host: Could not configure '/dev/hpet' to have a 1024Hz timer. This is not a fatal error, but for better emulation accuracy type: 'echo 1024 /proc/sys/dev/hpet/max-user-freq' as root. I'm not really familiar with rtc or hpet, but it doesn't seem that max-user-freq setting does anything, I still get the same warning.

  Read the article

• Squid 2.7.STABLE3-4.1 as a transparent proxy on Ubuntu Server 9.04

  - by LOGIC9

  Can't get this to work at all! I'm trying to get this linux box to act as a transparent proxy and, with the help of DHCP, force everyone on the network to gate into the proxy. I have two ethernet connections, both to the same switch. And I'm trying to get 192.168.1.234 to become the default gateway. The actual WAN connection is to a gateway 192.168.1.1. eth0 is 192.168.1.234 eth1 is 192.168.1.2 Effectively I'm trying to make eth0 a LAN only interface and eth1 a WAN interface. I've oi should set the gateway for eth1 to point to 192.168.1.234 my squid.conf file has the following directives added at the bottom: nly set eth0 to have a gateway address in /etc/network/interfaces I'm not sure whether http_port 3128 transparent acl lan src 192.168.1.0/24 acl lh src 127.0.0.1/255.255.255.0 http_access allow lan http_access allow lh i've added the following routing commands: iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.1.2:3128 iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 I set a computer with TCP settings 192.168.1.234 as the gateway and opened up google.com, but it comes up with a request error. Any ideas why this isn't working? :( Been searching continuously for a solution to no avail. ----------------------------- EDIT ------------------------------- Managed to get it to route properly to the squid, here's the error I get in the browser: ERROR The requested URL could not be retrieved While trying to process the request: GET / HTTP/1.1 Host: www.google.com User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-gb,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cache-Control: max-age=0 The following error was encountered: * Invalid Request Some aspect of the HTTP Request is invalid. Possible problems: * Missing or unknown request method * Missing URL * Missing HTTP Identifier (HTTP/1.0) * Request is too large * Content-Length missing for POST or PUT requests * Illegal character in hostname; underscores are not allowed Your cache administrator is webmaster. Generated Mon, 26 Oct 2009 03:41:15 GMT by mjolnir.lloydharrington.local (squid/2.7.STABLE3)

  Read the article

• Gateway on a virtual network interface used by LXC guests

  - by linkdd

  I'm currently having some problems with configuring a gateway for a virtual network interface. Here is what I've done : I created a virtual network interface : # brctl addbr lxc0 # brctl setfd lxc0 0 # ifconfig lxc0 192.168.0.1 promisc up # route add -net default gw 192.168.0.1 lxc0 The output of ifconfig gave me what I wanted : lxc0 Link encap:Ethernet HWaddr 22:4f:e4:40:89:bb inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::88cf:d4ff:fe47:3b6b/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:623 errors:0 dropped:0 overruns:0 frame:0 TX packets:7412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:50329 (49.1 KiB) TX bytes:335738 (327.8 KiB) I configured dnsmasq to provide a DNS server (using the default : 192.168.1.1) and a DHCP server. Then, my LXC guest is configured like this : lxc.network.type=veth lxc.network.link=lxc0 lxc.network.flags=up Every thing is working perfectly, my containers have an IP (192.168.0.57 and 192.168.0.98). I can ping the host and the containers from the containers and from the host : (host)# ping -c 3 192.168.0.114 PING 192.168.0.114 (192.168.0.114) 56(84) bytes of data. 64 bytes from 192.168.0.114: icmp_req=1 ttl=64 time=0.044 ms 64 bytes from 192.168.0.114: icmp_req=2 ttl=64 time=0.038 ms 64 bytes from 192.168.0.114: icmp_req=3 ttl=64 time=0.043 ms --- 192.168.0.114 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.038/0.041/0.044/0.007 ms (guest)# ping -c 3 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.048 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.042 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.042 ms --- 192.168.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.042/0.044/0.048/0.003 ms Now, it's time to configure the host as a gateway for the network 192.168.0.0/24 : #!/bin/sh # Clear rules iptables -F iptables -t nat -F iptables -t mangle -F iptables -X iptables -A FORWARD -i lxc0 -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o lxc0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward The final test failed completely, ping the outside : (guest)# ping -c 3 google.fr PING google.fr (173.194.67.94) 56(84) bytes of data. From 192.168.0.1: icmp_seq=3 Redirect Host(New nexthop: wi-in-f94.1e100.net (173.194.67.94)) From 192.168.0.1 icmp_seq=1 Destination Host Unreachable From 192.168.0.1 icmp_seq=2 Destination Host Unreachable From 192.168.0.1 icmp_seq=3 Destination Host Unreachable --- google.fr ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2017ms Did I missed something ?

  Read the article

< Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >