Search Results

Search found 5469 results on 219 pages for 'compare and swap'.

Page 173/219 | < Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >

• Not enough free disk space

  - by carmatt95

  I'm new to Ubuntu and I'm getting an error in software updater. When I try and do my daily updates, it says: The upgrade needs a total of 25.3 M free space on disk /boot. Please free at least an additional 25.3 M of disk space on /boot. Empty your trash and remove temporary packages of former installations using sudo apt-get clean. I tried typing in sudo apt-get clean into the terminal but I still get the message. All of the pages I read seem to be for experianced Ubuntuers. Any help would be appreciated. I'm running Ubuntu 12.10. I want to upgrade to 13.04 but understand I have to finish these first. EDIT: @Alaa, This is the output from typing in cat /etc/fstab into the terminal: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> /dev/mapper/ubuntu-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=fa55c082-112d-4b10-bcf3-e7ffec6cebbc /boot ext2 defaults 0 2 /dev/mapper/ubuntu-swap_1 none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 matty@matty-G41M-ES2L:~$ df -h: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 915G 27G 842G 4% / udev 984M 4.0K 984M 1% /dev tmpfs 397M 1.1M 396M 1% /run none 5.0M 0 5.0M 0% /run/lock none 992M 1.8M 990M 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sda1 228M 222M 0 100% /boot matty@matty-G41M-ES2L:~$ dpkg -l | grep linux-image: ii linux-image-3.5.0-17-generic 3.5.0-17.28 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-18-generic 3.5.0-18.29 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-19-generic 3.5.0-19.30 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-21-generic 3.5.0-21.32 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-22-generic 3.5.0-22.34 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-23-generic 3.5.0-23.35 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-24-generic 3.5.0-24.37 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-25-generic 3.5.0-25.39 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-26-generic 3.5.0-26.42 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP iF linux-image-3.5.0-28-generic 3.5.0-28.48 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP

  Read the article

• PHP-FPM stops responding and dies [migrated]

  - by user12361

  I'm running Drupal 6 with Nginx 1.5.1 and PHP-FPM (PHP 5.3.26) on a 1GB single core VPS with 3GB of swap space on SSD storage. I just switched from shared hosting to this unmanaged VPS because my site was getting too heavy, so I'm still learning the ropes. I have moderately high traffic, I don't really monitor it closely but Google Adsense usually record close to 30K page views/day. I usually have 50 to 80 authenticated users logged in and a few hundred more anonymous users hitting the Boost static HTML cache at any given moment. The problem I'm having is that PHP-FPM frequently stops responding, resulting in Nginx 502 or 504 errors. I swear I have read every page on the internet about this issue, which seems fairly common, and I've tried endless combinations of configurations, and I can't find a good solution. After restarting Nginx and PHP-FPM, the site runs really fast for a while, and then without warning it simply stops responding. I get a white screen while the browser waits on the server, and after about 30 seconds to a minute it throws an Nginx 502 or 504 error. Sometimes it runs well for 2 minutes, sometimes 5 minutes, sometimes 5 hours, but it always ends up hanging. When I find the server in this state, there is still plenty of free memory (500MB or more) and no major CPU usage, the control and worker PHP-FPM processes are still present, and the server is still pingable and usable via SSH. A reload of PHP-FPM via the init script revives it again. The hangups don't seem to correspond to the amount of traffic, because I observed this behavior consistently when I was testing this configuration on a development VPS with no traffic at all. I've been constantly tweaking the settings, but I can't definitively eliminate the problem. I set Nginx workers to just 1. In the PHP-FPM config I have tried all three of the process managers. "Dynamic" is definitely the least reliable, consistently hanging up after only a few minutes. "Static" also has been unreliable and unpredictable. The least buggy has been "ondemand", but even that is failing me, sometimes after as much as 12 to 24 hours. But I can't leave the server unattended because PHP-FPM dies and never comes back on its own. I tried adjusting the pm.max_children value from as low as 3 to as high as 50, doesn't make a lot of difference, but I currently have it at 10. Same thing for the spare servers values. I also have set pm.max_requests anywhere from 30 to unlimited, and it doesn't seem to make a difference. According to the logs, the PHP-FPM processes are not exiting with SIGSEGV or SIGBUS, but rather with SIGTERM. I get a lot of lines like: WARNING: [pool www] child 3739, script '/var/www/drupal6/index.php' (request: "GET /index.php") execution timed out (38.739494 sec), terminating and: WARNING: [pool www] child 3738 exited on signal 15 (SIGTERM) after 50.004380 seconds from start I actually found several articles that recommend doing a graceful reload of PHP-FPM via cron every few minutes or hours to circumvent this issue. So that's what I did, "/etc/init.d/php-fpm reload" every 5 minutes. So far, it's keeping the lights on. But it feels like a dreadful hack. Is PHP-FPM really that unreliable? Is there anything else I can do? Thanks a lot!

  Read the article

• iOS 5 New Features vs Android

  - by kerry

  Browsing through the iOS 5 features list, I can’t help but notice a lot of it is catch up. Having owned both an iPhone and an Android for a considerable amount of time, I figured I would jot down my opinions. Notification Center – Completely ripped off from Android but looks good and is a much needed addition iMessage – This is very interesting as most people who would think it’s cool, probably really wouldn’t understand the significance.  Basically, Apple is adding an IM application to iOS.  Now iPhone / iPad users can sit around messaging each other how cool it is like Crackberry users circa 2003.  I guess the only real improvement over MMS is that you can easily setup groups, see when each other are typing, and don’t incur text messaging charges; at the expense of leaving your non-iOS buddies out (who wants to talk to those losers anyways?). Newstand – An app update and not an OS one (Apple typically doesn’t make distinctions).  It all seems like stuff my current Nook stuff will do.  Note: I did look to compare prices but it seems that information is not available without downloading iTunes.  lame. Reminders – TODO lists are ho hum, but the ability to have reminders when you arrive or leave a position is pretty cool. Twitter integration – The fact that the best Apple can come up with is ‘one at a timing’ online service integration is laughable at best. Camera – Can control it from the lock screen.  Now you’ll have tons of pocket lint photos in your iCloud to go along with the wicked shot of that cheetah that just unexpectedly ran by your apartment. Photos – Speaking of iCloud, all of your devices photos will be synced through it.  That’s cool I guess, not sure if Android will do the same. Safari – What?  You haven’t been reading rss feeds on your device this whole time?  Something tells me you aren’t about to start. PC Free – Finely Apple untethers the iPhone.  What took them so long? Game Center – This should be an interesting service.  Attention Apple fanboys immediately forget how they are blatantly copying Microsoft achievements (at least rename them). Wifi Sync – Just couldn’t cut the cord completely could they?  For what it’s worth, the Zune has been doing this for 5 years now. All in all a pretty big update.  Mostly iCloud.  Mostly keeping up the mobile status quo.  As an Android user, I can’t say there is anything I am envious of.

  Read the article

• Getting 2D Platformer entity collision Response Correct (side-to-side + jumping/landing on heads)

  - by jbrennan

  I've been working on a 2D (tile based) 2D platformer for iOS and I've got basic entity collision detection working, but there's just something not right about it and I can't quite figure out how to solve it. There are 2 forms of collision between player entities as I can tell, either the two players (human controlled) are hitting each other side-to-side (i. e. pushing against one another), or one player has jumped on the head of the other player (naturally, if I wanted to expand this to player vs enemy, the effects would be different, but the types of collisions would be identical, just the reaction should be a little different). In my code I believe I've got the side-to-side code working: If two entities press against one another, then they are both moved back on either side of the intersection rectangle so that they are just pushing on each other. I also have the "landed on the other player's head" part working. The real problem is, if the two players are currently pushing up against each other, and one player jumps, then at one point as they're jumping, the height-difference threshold that counts as a "land on head" is passed and then it registers as a jump. As a life-long player of 2D Mario Bros style games, this feels incorrect to me, but I can't quite figure out how to solve it. My code: (it's really Objective-C but I've put it in pseudo C-style code just to be simpler for non ObjC readers) void checkCollisions() { // For each entity in the scene, compare it with all other entities (but not with one it's already compared against) for (int i = 0; i < _allGameObjects.count(); i++) { // GameObject is an Entity GEGameObject *firstGameObject = _allGameObjects.objectAtIndex(i); // Don't check against yourself or any previous entity for (int j = i+1; j < _allGameObjects.count(); j++) { GEGameObject *secondGameObject = _allGameObjects.objectAtIndex(j); // Get the collision bounds for both entities, then see if they intersect // CGRect is a C-struct with an origin Point (x, y) and a Size (w, h) CGRect firstRect = firstGameObject.collisionBounds(); CGRect secondRect = secondGameObject.collisionBounds(); // Collision of any sort if (CGRectIntersectsRect(firstRect, secondRect)) { //////////////////////////////// // // // Check for jumping first (???) // // //////////////////////////////// if (firstRect.origin.y > (secondRect.origin.y + (secondRect.size.height * 0.7))) { // the top entity could be pretty far down/in to the bottom entity.... firstGameObject.didLandOnEntity(secondGameObject); } else if (secondRect.origin.y > (firstRect.origin.y + (firstRect.size.height * 0.7))) { // second entity was actually on top.... secondGameObject.didLandOnEntity.(firstGameObject); } else if (firstRect.origin.x > secondRect.origin.x && firstRect.origin.x < (secondRect.origin.x + secondRect.size.width)) { // Hit from the RIGHT CGRect intersection = CGRectIntersection(firstRect, secondRect); // The NUDGE just offsets either object back to the left or right // After the nudging, they are exactly pressing against each other with no intersection firstGameObject.nudgeToRightOfIntersection(intersection); secondGameObject.nudgeToLeftOfIntersection(intersection); } else if ((firstRect.origin.x + firstRect.size.width) > secondRect.origin.x) { // hit from the LEFT CGRect intersection = CGRectIntersection(firstRect, secondRect); secondGameObject.nudgeToRightOfIntersection(intersection); firstGameObject.nudgeToLeftOfIntersection(intersection); } } } } } I think my collision detection code is pretty close, but obviously I'm doing something a little wrong. I really think it's to do with the way my jumps are checked (I wanted to make sure that a jump could happen from an angle (instead of if the falling player had been at a right angle to the player below). Can someone please help me here? I haven't been able to find many resources on how to do this properly (and thinking like a game developer is new for me). Thanks in advance!

  Read the article

• SSI: Failed String Comparison with CGI Environment Variable [migrated]

  - by Calyo Delphi

  I am currently working on developing a personal website. It's not my first time doing this, but this is my first major foray into implementing SSI. I've run myself into a wall, however, with an if-else directive that uses one of the CGI environment variables as part of its comparison. Even after some limited attempts at debugging, all of the output and documentation that I have means that the comparisons being made should fail outright. This is not the case, and the wrong evaluation is being made by the if-else directive. Here's the code in the file index.shtml: <head> <!--#set var="page" value="Home" --> <!--#include file="headlinks.shtml" --> <style> img#ref { float: right; margin-left: 8px; border-width: 0px; } </style> </head> Here's the code in the file headlinks.shtml: <title><!--#echo var="page" --> &ndash; <!--#echo var="HTTP_HOST" --></title> <!--#set var="docroot" value="${DOCUMENT_ROOT}" --> <!--#echo var="docroot" --> <!--#if expr="( $docroot != '/Applications/MAMP/htdocs' ) || ( $docroot != '/home/dragarch/public_html' )" --> <link rel="stylesheet" type="text/css" href="../style.css"> <link rel="shortcut icon" type="image/svg+xml" href="../favicon.svg" /> <!--#else --> <link rel="stylesheet" type="text/css" href="style.css"> <link rel="shortcut icon" type="image/svg+xml" href="favicon.svg" /> <!--#endif --> And here's the output for the file index.shtml: <title>Home &ndash; dragarch</title> /Applications/MAMP/htdocs <link rel="stylesheet" type="text/css" href="../style.css"> <link rel="shortcut icon" type="image/svg+xml" href="../favicon.svg" /> Both style.css and favicon.svg are in the document root with index.shtml, so the if directive should fail and default to the output of the else directive. As you can see, while the document root (which is currently the MAMP htdocs folder on my own notebook) is correct according to the output of the echo directive, the comparison in the if-else directive fails to compare the strings properly. I'm using this page for my documentation: http://httpd.apache.org/docs/2.2/mod/mod_include.html I'm at a complete loss as to why this is the case, and need a bit of help here. EDIT: I should note that dragarch is a hostname that I configured in /etc/hosts to point to 127.0.0.1 so I could test the site without having to use localhost. It has no real effect on the functionality of anything, other than to just act as a prettier hostname to use.

  Read the article

• Is hidden content (display: none;) -indexed- by search engines? [closed]

  - by user568458

  Possible Duplicate: How bad is it to use display: none in CSS? We've established on this site before (in this question) that, since there are so many legitimate uses for hiding content with display: none; when creating interactive features, that sites aren't automatically penalised for content that is hidden this way (so long as it doesn't look algorithmically spammy). Google's Webmaster guidelines also make clear that a good practice when using content that is initially legitimately hidden for interactivity purposes is to also include the same content in a <noscript> tag, and Google recommend that if you design and code for users including users with screen readers or javascript disabled, then 9 times out of 10 good relevant search rankings will follow (though their specific advice seems more written for cases where javascript writes new content to the page). JavaScript: Place the same content from the JavaScript in a tag. If you use this method, ensure the contents are exactly the same as what’s contained in the JavaScript, and that this content is shown to visitors who do not have JavaScript enabled in their browser. So, best practice seems pretty clear. What I can't find out is, however, the simple factual matter of whether hidden content is indexed by search engines (but with potential penalties if it looks 'spammy'), or, whether it is ignored, or, whether it is indexed but with a lower weighting (like <noscript> content is, apparently). (for bonus points it would be great to know if this varies or is consistent between display: none;, visibility: hidden;, etc, but that isn't crucial). This is different to the other questions on display:none; and SEO - those are about good and bad practice and the answers are discussions of good and bad practice, I'm interested simply in the factual 'Yes or no' question of whether search engines index, or ignore, content that is in display: none; - something those other questions' answers aren't totally clear on. One other question has an answer, "Yes", supported by a link to an article that doesn't really clear things up: it establishes that search engines can spot that text is hidden, it discusses (again) whether hidden text causes sites to be marked as spam, and ultimately concludes that in mid 2011, Google's policy on hidden text was evolving, and that they hadn't at that time started automatically penalising display:none; or marking it as spam. It's clear that display: none; isn't always spam and isn't always treated as spam (many Google sites use it...): but this doesn't clear up how, or if, it is indexed. What I will do will be to follow the guidelines and make sure that all the content that is initially hidden which regular users can explore using javascript-driven interactivity is also structured in way that noscript/screenreader users can use. So I'm not interested in best practice, opinions etc because best practice seems to be really clear: accessibility best practices boosts SEO. But I'd like to know what exactly will happen: whether any display: none; content I have alongside <noscript> or otherwise accessibility-optimised content will be be ignored, or indexed again, or picked up to compare against the <noscript> content but not indexed... etc.

  Read the article

• Upgrading to 9.2 - Info You Can Use (part 1)

  - by John Webb

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Rebekah Jackson joins our blog with a series of helpful hints on planning your upgrade to PeopleSoft 9.2.   Find Features & Capabilities There are many ways that you might learn about new features and capabilities within our releases, but if you aren’t sure where to start or how best to go about it, we recommend: Go to www.peoplesoftinfo.com Select the product line you are interested in, and go to the ‘Release Content’ tab Use the Video Feature Overviews (VFOs) on YouTube and the Cumulative Feature Overview (CFO) tool to find features and functions. The VFOs are brief recordings that summarize some of our most popular capabilities. These recordings are great tools for learning about new features, or helping others to visualize the value they can bring to your organization. The VFOs focus on some of our highest value and most compelling new capabilities. We also provide summarized ‘Why Upgrade to 9.2’ VFOs for HCM, Financials, and Supply Chain. The CFO is a spreadsheet based tool that allows you to select the release you are currently on, and compare it to the new release. It will return the list of all new features and capabilities, by product. You can browse the full list and / or highlight areas that look particularly interesting. Once you have a list of features by product, use the Release Value Proposition, Pre-Release Notes, and the Release Notes documents to get more details on and supporting value statements about why those features will be helpful. Gather additional data and supporting information, including: Go to the Product Data Sheets tab, and review the respective data sheets. These summarize the capabilities in the product, and provide succinct value statements for the product and capabilities. The PeopleSoft 9.2 Upgrade page, which has many helpful resources. Important Notes:   -  We recommend that you go through the above steps for the application areas of interest, as well as for PeopleTools. There are many areas in PeopleTools 8.53 and the 9.2 application releases that combine technical and functional capabilities to deliver transformative value.    - We also recommend that you review the Portal Solutions content. With your license to PeopleSoft applications, you have access to many of the most powerful capabilities within the Interaction Hub.    -  If you have recently upgraded to PeopleSoft 9.1, and an immediate upgrade to 9.2 is simply not realistic, you can apply the same approaches described here to find untapped capabilities in your current products. Many of the features in 9.2 were delivered first in our 9.1 Feature Packs. To find the Release Value Proposition, Pre-Release Notes, and Release Notes for these releases, search on ‘PeopleSoft 9.1 Documentation Home Page’ on My Oracle Support, and select your desired product area. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

  Read the article

• 12.10 unable to install or even run from Live CD with nVidia GTX 580

  - by user99056

  I've used Ubuntu in the past (set up as web server, etc over in Iraq), so I'm not a 100% Linux Noob, however, I'm running into a brick wall here. I've got a machine I built when I got back to the US earlier this year, running Windows 7 Ultimate on it, and I've now got some free time and would like to transition over to Ubuntu full time. I've searched around in the forums, and there seems to be an issue with the nVidia graphics cards, so I've tried going to the EVGA site to see if I could find a new BIOS update for it and had no luck, so I'm back searching the forums here again and decided to just go ahead and post my question. My apologies if this is covered in another post and I was just unable to find it. I've found a few 'similar' posts, but nothing as bad as my issue. With the history aside, here is the actual detailed issue: I purchased a new SSD (Intel 520 SSD), arrived today, and I disconnect my old Windows 7 SSD. I had pre downloaded the ubuntu-12.10-desktop-amd64 earlier today and burned it to DVD. Upon inserting the Live CD into the computer and booting up, everything was fine up to the 'Run From Live CD' or 'Install Ubuntu Now' buttons. As I was sure I wanted to go ahead and make the switch, I selected the 'Install Now' from the right hand side. CD Spins up, black window pops up, and then the errors started: date/time GPU Lockup date/time Failed to idle channel 1 date/time PFIFO - playlist update failed date/time Failed to idle channel 2 date/time PFIFO - playlist update failed Thinking it might correct itself, I let it run and it would swap over to a GUI Screen that was locked up with major blurring/etc, then back to the command line with the errors. Eventually it said something along the lines of 'unknown status' and switched back to the GUI and froze. So, that's when I tried to see if I could find a BIOS upgrade for the nVidia GTX580 cards, and had no luck. So I thought, why not try to just run it from the Live CD and see if I can at least get a look at it, maybe if I could get it running try to do some sort of install from there and fix the driver issue. I rebooted, brought up the Live CD, and this time chose the left option / run from the CD. It brought me all the way in to the desktop, I saw my drives, the other icons, could move the mouse, etc for about 30 seconds and then it locked up completely. I've tried this a couple of times and get the same results every time. Hardware: Intel i7-3930K CPU @ 3.2GHz (12 CPUs) / MSI MS-7760 Motherboard / 32GB RAM / 2 x EVGA (nVidia) GeForce GTX 580 (4GB Ram each) So the question is: Is there any way to install 12.10 if you can't even get the Live CD to run (for more than 30 seconds)? My current hardware configuration is both of the GTX 580 cards have an SLI jumper on them, and I have 2 monitors on each card. (Ubuntu info obviously only shows on the main monitor from the failed installation and the attempt at running the Live CD). Perhaps opening the machine back up and removing the SLI Jumper and removing the other 3 monitors (so it only would have 1 video card with one monitor on it) would actually allow me to get 12.10 installed, then I could work on an nVidia Video Driver fix for the GTX 580, and then possibly hook up the other video card and monitors? Or is this something that they are currently aware of and may update with a future release in the next few days/weeks? Any thoughts or suggestions would be greatly appreciated, as I can't even try to fix the issue (assuming it is the nVidia drivers) if I can't even get it to install at all.

  Read the article

• Why is 0 false?

  - by Morwenn

  This question may sound dumb, but why does 0 evaluates to false and any other [integer] value to true is most of programming languages? String comparison Since the question seems a little bit too simple, I will explain myself a little bit more: first of all, it may seem evident to any programmer, but why wouldn't there be a programming language - there may actually be, but not any I used - where 0 evaluates to true and all the other [integer] values to false? That one remark may seem random, but I have a few examples where it may have been a good idea. First of all, let's take the example of strings three-way comparison, I will take C's strcmp as example: any programmer trying C as his first language may be tempted to write the following code: if (strcmp(str1, str2)) { // Do something... } Since strcmp returns 0 which evaluates to false when the strings are equal, what the beginning programmer tried to do fails miserably and he generally does not understand why at first. Had 0 evaluated to true instead, this function could have been used in its most simple expression - the one above - when comparing for equality, and the proper checks for -1 and 1 would have been done only when needed. We would have considered the return type as bool (in our minds I mean) most of the time. Moreover, let's introduce a new type, sign, that just takes values -1, 0 and 1. That can be pretty handy. Imagine there is a spaceship operator in C++ and we want it for std::string (well, there already is the compare function, but spaceship operator is more fun). The declaration would currently be the following one: sign operator<=>(const std::string& lhs, const std::string& rhs); Had 0 been evaluated to true, the spaceship operator wouldn't even exist, and we could have declared operator== that way: sign operator==(const std::string& lhs, const std::string& rhs); This operator== would have handled three-way comparison at once, and could still be used to perform the following check while still being able to check which string is lexicographically superior to the other when needed: if (str1 == str2) { // Do something... } Old errors handling We now have exceptions, so this part only applies to the old languages where no such thing exist (C for example). If we look at C's standard library (and POSIX one too), we can see for sure that maaaaany functions return 0 when successful and any integer otherwise. I have sadly seen some people do this kind of things: #define TRUE 0 // ... if (some_function() == TRUE) { // Here, TRUE would mean success... // Do something } If we think about how we think in programming, we often have the following reasoning pattern: Do something Did it work? Yes -> That's ok, one case to handle No -> Why? Many cases to handle If we think about it again, it would have made sense to put the only neutral value, 0, to yes (and that's how C's functions work), while all the other values can be there to solve the many cases of the no. However, in all the programming languages I know (except maybe some experimental esotheric languages), that yes evaluates to false in an if condition, while all the no cases evaluate to true. There are many situations when "it works" represents one case while "it does not work" represents many probable causes. If we think about it that way, having 0 evaluate to true and the rest to false would have made much more sense. Conclusion My conclusion is essentially my original question: why did we design languages where 0 is false and the other values are true, taking in account my few examples above and maybe some more I did not think of? Follow-up: It's nice to see there are many answers with many ideas and as many possible reasons for it to be like that. I love how passionate you seem to be about it. I originaly asked this question out of boredom, but since you seem so passionate, I decided to go a little further and ask about the rationale behind the Boolean choice for 0 and 1 on Math.SE :)

  Read the article

• WPF / C#: Transforming coordinates from an image control to the image source

  - by Gabriel

  I'm trying to learn WPF, so here's a simple question, I hope: I have a window that contains an Image element bound to a separate data object with user-configurable Stretch property <Image Name="imageCtrl" Source="{Binding MyImage}" Stretch="{Binding ImageStretch}" /> When the user moves the mouse over the image, I would like to determine the coordinates of the mouse with respect to the original image (before stretching/cropping that occurs when it is displayed in the control), and then do something with those coordinates (update the image). I know I can add an event-handler to the MouseMove event over the Image control, but I'm not sure how best to transform the coordinates: void imageCtrl_MouseMove(object sender, MouseEventArgs e) { Point locationInControl = e.GetPosition(imageCtrl); Point locationInImage = ??? updateImage(locationInImage); } Now I know I could compare the size of Source to the ActualSize of the control, and then switch on imageCtrl.Stretch to compute the scalars and offsets on X and Y, and do the transform myself. But WPF has all the information already, and this seems like functionality that might be built-in to the WPF libraries somewhere. So I'm wondering: is there a short and sweet solution? Or do I need to write this myself? EDIT I'm appending my current, not-so-short-and-sweet solution. Its not that bad, but I'd be somewhat suprised if WPF didn't provide this functionality automatically: Point ImgControlCoordsToPixelCoords(Point locInCtrl, double imgCtrlActualWidth, double imgCtrlActualHeight) { if (ImageStretch == Stretch.None) return locInCtrl; Size renderSize = new Size(imgCtrlActualWidth, imgCtrlActualHeight); Size sourceSize = bitmap.Size; double xZoom = renderSize.Width / sourceSize.Width; double yZoom = renderSize.Height / sourceSize.Height; if (ImageStretch == Stretch.Fill) return new Point(locInCtrl.X / xZoom, locInCtrl.Y / yZoom); double zoom; if (ImageStretch == Stretch.Uniform) zoom = Math.Min(xZoom, yZoom); else // (imageCtrl.Stretch == Stretch.UniformToFill) zoom = Math.Max(xZoom, yZoom); return new Point(locInCtrl.X / zoom, locInCtrl.Y / zoom); }

  Read the article

• ASP.NET MVC returning ContentResult using Ajax form - how to preserve whitespace?

  - by Ben

  In my application users can enter commands that are executed on the server. The results are added to a session object. I then stuff the session object into ViewData and add it to a textarea. When done with a standard HTML form whitespace is preserved. However, when I swap this out for an ajax form (Ajax.BeginForm) and return the result as ContentResult, the whitespace is removed. Controller Action: [HttpPost] public ActionResult Execute(string submitButton, string command) { if (submitButton == "Clear") { this.CurrentConsole = string.Empty; } if (submitButton == "Execute" && !string.IsNullOrEmpty(command)) { var script = new PSScript() { Name = "Ad hoc script", CommandText = command }; this.CurrentConsole += _scriptService.ExecuteScript(script); } if (Request.IsAjaxRequest()) { return Content(this.CurrentConsole, "text/plain"); } return RedirectToAction("Index"); } View: <fieldset> <legend>Shell</legend> <%=Html.TextArea("console", ViewData["console"].ToString(), new {@class = "console", @readonly = "readonly"})%> <% using (Ajax.BeginForm("Execute", new AjaxOptions { UpdateTargetId = "console", OnBegin = "console_begin", OnComplete = "console_complete"})) { %> <input type="text" id="command" name="command" class="commandtext" /> <input type="submit" value="Execute" class="runbutton" name="submitButton" /> <input type="submit" value="Clear" class="runbutton" name="submitButton" /> <%} %> </fieldset> How can I ensure that whitespace is preserved? When I inspect the response in FireBug it looks like the whitespace is transmitted, so can only assume it has something to do with the way in which the javascript handles the response data.

  Read the article

• close long poll connection, jQuery-ajax

  - by MyGGaN

  Background I use a Tornado-like server with support for long-polls. Each web pages a user clicks around to sets up a long poll to the server like this: $.ajax({ type: 'GET', url: "/mylongpollurl/", dataType: 'application/json', success: function(json) { // I do stuff here }, error: function(xhr, errText, ex) { // If timeout I send a new long-poll request } }); Problem I will now rely on data that I get from Fiddler monitoring all requests made from my browser (FF at the moment). Page 1 is loaded and the long poll request is made, now idling at server side. I click a link to page 2 and that page is loaded and setting up a long poll request, BUT the long poll request from page 1 is still idling at server side (according to Fiddler). This means that I will stack all long poll calls when clicking around the page, thus end up with lots of active connections on the server (or are they maybe sharing connection?) My thoughts - As it's a Tornado-like server (using epoll) it can handle quite a lot of connections. But this fact is not to exploit in my opinion. What I mean is that I prefer not to have a timeout on the server for this case (were the client disappears). - I know those stand alone pages better uses a common head and only swap content via ajax calls but this design we use today was not my call... - The best way to solve this would probably be to have the connection reused (hard to pull off I think) or closed as soon as the browser leaves the page (you click to another page). Thanks -- MyGGaN

  Read the article

• How to use custom IComparer for SortedDictionary?

  - by Magnus Johansson

  I am having difficulties to use my custom IComparer for my SortedDictionary<. The goal is to put email addresses in a specific format ([email protected]) as the key, and sort by last name. When I do something like this: public class Program { public static void Main(string[] args) { SortedDictionary<string, string> list = new SortedDictionary<string, string>(new SortEmailComparer()); list.Add("[email protected]", "value1"); list.Add("[email protected]", "value2"); foreach (KeyValuePair<string, string> kvp in list) { Console.WriteLine(kvp.Key); } Console.ReadLine(); } } public class SortEmailComparer : IComparer<string> { public int Compare(string x, string y) { Regex regex = new Regex("\\b\\w*@\\b", RegexOptions.IgnoreCase | RegexOptions.CultureInvariant | RegexOptions.IgnorePatternWhitespace | RegexOptions.Compiled ); string xLastname = regex.Match(x).ToString().Trim('@'); string yLastname = regex.Match(y).ToString().Trim('@'); return xLastname.CompareTo(yLastname); } } I get this ArgumentException: An entry with the same key already exists. when adding the second item. I haven't worked with a custom IComparer for a SortedDictionary before, and I fail to see my error , what am I doing wrong?

  Read the article

• Selenium IDE - Passing a URL string variable into a conditional 'gotoIf' statement throws a Syntax e

  - by user318568

  I am trying to store the current url (http://example.com)in a variable and compare it with another string as a condition in the gotoIf command (part of the gotoIf extension.js): storeLocation || url gotoIf || ${url}=="http://example.com" || label When I run this seleniun ide throws this error: [error] Unexpected Exception: message -> syntax error, fileName -> chrome://selenium-ide/content/tools.js -> file:///C:/Users/David%20Cunningham/Desktop/extensions_js/extensions.js, lineNumber -> 183, stack -> eval("http://example.com==\"http://example.com\"")@:0 ("http://example.com==\"http://example.com\"","label1")@chrome://selenium-ide/content/tools.js -> file:///C:/Users/David%20Cunningham/Desktop/extensions_js/extensions.js:183 ("http://example.com==\"http://example.com\"","label1")@chrome://selenium-ide/content/selenium/scripts/htmlutils.js:60 ([object Object],[object Object])@chrome://selenium-ide/content/selenium/scripts/selenium-commandhandlers.js:310 ()@chrome://selenium-ide/content/selenium/scripts/selenium-executionloop.js:112 (6)@chrome://selenium-ide/content/selenium/scripts/selenium-executionloop.js:78 (6)@chrome://selenium-ide/content/selenium/scripts/htmlutils.js:60 , name -> SyntaxError storeLocation should return a String so why am i getting this error, what is wrong with the syntax and how do I declare this command?

  Read the article

• How far did DevExpress get with Javascript refactoring?

  - by MattX

  Over a year ago, I remember watching one of DevExpress evangelists previewing or at least promoting rich Javascript refactoring (beyond just limited intellisense) within the Visual Studio shell, I recall part of CodeRush/DevExpress product line. I was excited. On checking today (lmgtfy) I can find only very very limited reference to it, just one small italtic line about beta in product description, no videos, no blog posts, no community buzz. Was it dropped? Vapourware? Poor implementation that they dont even promote it? With Javascript arguably the most popular programming language ever and with a VM for it on practically every machine in last 10 years, why is editor support so poor? (Compared with those for Java and C#)? You see the likes of ScottGu bragging we now have jQuery intellisense but compare this to richness of C# support in the IDE it is a joke. Someone once said since there are many style of writing Javascript a rich IDE (beyond intellisense) with refactoring support is difficult, but if several engines can interpret/compile JS with same result surely it should be hard to analysis it to support stuff like rename variable, extract method, move to another namespace (or JS minic of it), etc.. Am I wrong?

  Read the article

• .NET C#: WebBrowser control Navigate() does not load targeted URL

  - by Dave

  Hey guys, I'm trying to programmatically load a web page via the WebBrowser control with the intent of testing the page & it's JavaScript functions. Basically, I want to compare the HTML & JavaScript run through this control against a known output to ascertain whether there is a problem. However, I'm having trouble simply creating and navigating the WebBrowser control. The code below is intended to load the HtmlDocument into the WebBrowser.Document property: WebBrowser wb = new WebBrowser(); wb.AllowNavigation = true; wb.Navigate("http://www.google.com/"); When examining the web browser's state via Intellisense after Navigate() runs, the WebBrowser.ReadyState is 'Uninitialized', WebBrowser.Document = null, and it overall appears completely unaffected by my call. On a contextual note, I'm running this control outside of a Windows form object: I do not need to load a window or actually look at the page. Requirements dictate the need to simply execute the page's JavaScript and examine the resultant HTML. Any suggestions are greatly appreciated, thanks!

  Read the article

• c# find nearest match to array of doubles

  - by Scott

  Given the code below, how do I compare a List of objects's values with a test value? I'm building a geolocation application. I'll be passing in longitude and latitude and would like to have the service answer back with the location closest to those values. I started down the path of converting to a string, and formatting the values down to two decimal places, but that seemed a bit too ghetto, and I'm looking for a more elegant solution. Any help would be great. Thanks, Scott public class Location : IEnumerable { public string label { get; set; } public double lat { get; set; } public double lon { get; set; } //Implement IEnumerable public IEnumerator GetEnumerator() { return (IEnumerator)this; } } [HandleError] public class HomeController : Controller { private List<Location> myList = new List<Location> { new Location { label="Atlanta Midtown", lon=33.657674, lat=-84.423130}, new Location { label="Atlanta Airport", lon=33.794151, lat=-84.387228}, new Location { label="Stamford, CT", lon=41.053758, lat=-73.530979}, ... } public static int Main(String[] args) { string inLat = "-80.987654"; double dblInLat = double.Parse(inLat); // here's where I would like to find the closest location to the inLat // once I figure out this, I'll implement the Longitude, and I'll be set }

  Read the article

• grails run-war connects to mysql but grails run-war doesn't

  - by damian

  Hi, I have a unexpected problem. I had create a war with grails war. Then I had deployed in Tomcat. For my surprise the crud works fine but I don't know what persistence is using. So I did this test: Compare grails prod run-app with grails prod run-war. The first works fine, and does conect with the mysql database. The other don't. This is my DataSource.groovy: dataSource { pooled = true driverClassName = "com.mysql.jdbc.Driver" username = "grails" password = "mysqlgrails" } hibernate { cache.use_second_level_cache=false cache.use_query_cache=false cache.provider_class='net.sf.ehcache.hibernate.EhCacheProvider' } // environment specific settings environments { development { dataSource { dbCreate = "update" // one of 'create', 'create-drop','update' url = "jdbc:mysql://some-key.amazonaws.com/MyDB" } } test { dataSource { dbCreate = "update" // one of 'create', 'create-drop','update' url = "jdbc:mysql://some-key.amazonaws.com/MyDB" } } production { dataSource { dbCreate = "update" url = "jdbc:mysql://some-key.amazonaws.com/MyDB" } } } Also I extract the war to see if I could find some data source configuration file without success. More info: Grails version: 1.2.1 JVM version: 1.6.0_17 Also I think this question it's similar, but doesn't have a awnser.

  Read the article

• Programmatically controlling Chart in Silverlight toolkit

  - by Manoj

  Hi, I want to control the x and y axis of a multi series line charts available in Silverlight toolkit from the C# code. I am not able to find any appropriate example using google. Any kind of example or pointers would be appreciated! EDIT: This is what I have done so far: <toolkit:Chart Canvas.Left="104" Canvas.Top="18" Name="chartCompare" Title="Compare Series" Height="285" Width="892"> <toolkit:LineSeries Title="SP1" Name="Series1"/> </toolkit:Chart> And in the code behind I am trying this: Series1.ItemsSource = ObjectList; Series1.IndependentValuePath = "Val1"; Series1.DependentValuePath = "Val2"; Where ObjectList is a List of Objects which has val1 and val2 as its property. But it is throwing an error when I run this in Line "Series1.ItemsSource = ObjectList;" saying "Object reference not set to an instance of an object..". I have initialised and set its value just in the line before it. Actually I have set this as an item source for a data grid in the line before it and it works fine.

  Read the article

• WPF ListView get GridViewColumn from control inside DataTemplate

  - by ragi

  Example: <ListView Name="lvAnyList" ItemsSource="{Binding}"> <ListView.View> <GridView> <GridViewColumn Header="xx" DisplayMemberBinding="{Binding XX}" CellTemplate="{DynamicResource MyDataTemplate}"/> <GridViewColumn Header="yy"> <GridViewColumn.CellTemplate> <DataTemplate> <TextBlock Text="{Binding YY}" /> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> </GridView> </ListView.View> </ListView> If I access the TextBlock inside DataTemplate I will have access to information about the bound path. But I don't know how to find (starting from the TextBlock) its containing GridViewColumn (which is in the GridViewRowPresenter columns list) and compare it to the grid's GridViewColumn (from GridViewHeaderRowPresenter column list) to get the header's name. At the end I should have the pairs: xx-XX, yy-YY I can find a list of all TextBlocks inside ListView by using this: GridViewRowPresenter gvrp = ControlAux.GetVisualDescendants<GridViewRowPresenter>(element).FirstOrDefault(); IEnumerable<TextBlock> entb = GetVisualDescendants<TextBlock>(gvrp); I can find a list of all GridViewColumnHeaders: GridViewHeaderRowPresenter gvhrp = ControlAux.GetVisualDescendants<GridViewHeaderRowPresenter>(element).FirstOrDefault(); And I cannot find the connection between the TextBlocks and the GridViewColumns... I hope this is understandable.

  Read the article

• Is HttpContextWrapper all that....useful?

  - by bakasan

  I've been going through the process of cleaning up our controller code to make each action as testable. Generally speaking, this hasn't been too difficult--where we have opportunity to use a fixed object, like say FormsAuthentication, we generally introduce some form of wrapper as appropriate and be on our merry way. For reasons not particularly germaine to this conversation, when it came to dealing with usage of HttpContext, we decided to use the newly created HttpContextWrapper class rather than inventing something homegrown. One thing we did introduce was the ability to swap in a HttpContextWrapper (like say, for unit testing). This was wholly inspired by the way Oren Eini handles unit testing with DateTimes (see article, a pattern we also use) public static class FooHttpContext { public static Func<HttpContextWrapper> Current = () => new HttpContextWrapper(HttpContext.Current); public static void Reset() { Current = () => new HttpContextWrapper(HttpContext.Current); } } Nothing particularly fancy. And it works just fine in our controller code. The kicker came when we go to write unit tests. We're using Moq as our mocking framework, but alas var context = new Mock<HttpContextWrapper>() breaks since HttpContextWrapper doesn't have a parameterless ctor. And what does it take as a ctor parameter? A HttpContext object. So I find myself in a catch 22. I'm using the prescribed way to decouple HttpContext--but I can't mock a value in because the original HttpContext object was sealed and therefore difficult to test. I can map HttpContextBase, which both derive from--but that doesn't really get me what I'm after. Am I just missing the point somewhere with regard to HttpContextWrapper? I can find ways to work around the issue, but we are kind of fond of remaining consistent in decoupling using the Function delegate pattern--but it seems like we're not fully grokking intent of the wrapper.

  Read the article

• Eclipse Helios - Not Stopping at Breakpoints (Help!)

  - by Rylie

  Dear Eclipse Expert, I recently upgraded from Eclipse Galileo to Helios. Helios stops at breakpoints ONLY when debugging "as a PHP Script", but not when debugging "as a Web Page". When debugging as a web page, it looks like the correct debug query string to start a debug session is getting tacked on to the url, like so: http://localhost/hello.php?XDEBUG_SESSION_START=ECLIPSE_DBGP &KEY=129798139020511 but elipse does not stop at the breakpoints. It just zooms thru the code and displays the output in the browser. This is my xdebug configuration in php.ini that works for Galileo, but is not working for Helios: (click here to see my entire xdebug config settings) ;extension=xdebug.so <-- is this needed? zend_extension=" /Applications/MAMP/bin/php5.3/lib/php/extensions/no-debug-no n-zts-20090626/xdebug.so " xdebug.remote_enable=on xdebug.remote_autostart=off xdebug.remote_handler=dbgp xdebug.remote_mode=req xdebug.remote_host=127.0.0.1 xdebug.remote_port=9000 xdebug.idekey= ; to enable remote debugging zend_debugger.allow_hosts=127.0.0.1/32 zend_debugger.expose_remotely=always Can you post your xdebug configuration that works for Helios? If possible, can you share the xdebug portion of your phpinfo() output? Would like to compare settings of an xdebug configuration that works on Helios with what I have. Thanks in advance. Rylie

  Read the article

• Vbscript - Checking each subfolder for files and copy files

  - by Kenny Bones

  I'm trying to get this script to work. It's basically supposed to mirror two sets of folders and make sure they are exactly the same. If a folder is missing, the folder and it's content should be copied. Then the script should compare the DateModified attribute and only copy the files if the source file is newer than the destination file. I'm trying to get together a script that does exactly that. And so far I've been able to check all subfolder if they exist and then create them if they don't. Then I've been able to scan the top source folder for it's files and copy them if they don't exist or if the DateModified attribute is newer on the source file. What remains is basically scanning each subfolder for its files and copy them if they don't exist or if the DateModified stamp is newer. Here's the code: Dim strSourceFolder, strDestFolder strSourceFolder = "c:\users\vegsan\desktop\Source\" strDestFolder = "c:\users\vegsan\desktop\Dest\" Set fso = CreateObject("Scripting.FileSystemObject") Set objTopFolder = fso.GetFolder(strSourceFolder) Set colTopFiles = objTopFolder.Files 'Check to see if subfolders actually exist. Create if they don't Set objColFolders = objTopFolder.SubFolders For Each subFolder in objColFolders CheckFolder subFolder, strSourceFolder, strDestFolder Next ' Check all files in first top folder For Each objFile in colTopFiles CheckFiles objFile, strSourceFolder, strDestFolder Next Sub CheckFolder (strSubFolder, strSourceFolder, strDestFolder) Set fso = CreateObject("Scripting.FileSystemObject") Dim folderName, aSplit aSplit = Split (strSubFolder, "\") UBound (aSplit) If UBound (aSplit) > 1 Then folderName = aSplit(UBound(aSplit)) folderName = strDestFolder & folderName End if If Not fso.FolderExists(folderName) Then fso.CreateFolder(folderName) End if End Sub Sub CheckFiles (file, SourceFolder, DestFolder) Set fso = CreateObject("Scripting.FileSystemObject") Dim DateModified DateModified = file.DateLastModified ReplaceIfNewer file, DateMofidied, SourceFolder, DestFolder End Sub Sub ReplaceIfNewer (sourceFile, DateModified, SourceFolder, DestFolder) Const OVERWRITE_EXISTING = True Dim fso, objFolder, colFiles, sourceFileName, destFileName Dim DestDateModified, objDestFile Set fso = CreateObject("Scripting.FileSystemObject") sourceFileName = fso.GetFileName(sourceFile) destFileName = DestFolder & sourceFileName if Not fso.FileExists(destFileName) Then fso.CopyFile sourceFile, destFileName End if if fso.FileExists(destFileName) Then Set objDestFile = fso.GetFile(destFileName) DestDateModified = objDestFile.DateLastModified if DateModified <> DestDateModified Then fso.CopyFile sourceFile, destFileName End if End if End Sub

  Read the article

• 2 jQuery plugins don't seem to work together

  - by Carbonara

  I have 2 plugins, amongst several others, that are loaded together. All of them work together correctly expect 2. By commenting out bits of code etc I've narrowed it down to the two plugins. These are the 2 plugins in question jQuery Tools tabs and NewsTicker I have tried calling them as follows as per their instructions $(document).ready(function(){ $().newsTicker({ newsList: "#news", startDelay: 10, placeHolder1: " []" }); $("ul.tabs").tabs("div.panes > div"); }); With the calls this way around the ticker works but the tabs do not. If I swap the calls round then the tabs work but the ticker does not. Both plugins work if the other call is commented out. Any ideas what could be wrong here or could something in the code of one of the plugins be affecting the other. Both plugins work ok when several other plugins are also called in the same script. I'm just wondering if I'm calling them in the wrong way or something being fairly new to jQuery

  Read the article

• Strings in array are no longer strings after jQuery.each()

  - by Álvaro G. Vicario

  I'm pretty confused with the behaviour of arrays of strings when I loop them through the jQuery.each() method. Apparently, the strings become jQuery objects inside the callback function. However, I cannot use the this.get() method to obtain the original string; doing so triggers a this.get is not a function error message. I suppose the reason is that it's not a DOM node. I can do $(this).get() but it makes my string become an array (from "foo" to ["f", "o", "o"]). How can I cast it back to string? I need to get a variable of String type because I pass it to other functions that compare the values among them. I enclose a self-contained test case (requires Firebug's console): <!DOCTYPE html> <html> <head><title></title> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js"></script> <script type="text/javascript"><!-- $(function(){ var foo = []; var $foo = $(foo); foo.push("987"); $foo.push("987"); foo.push("654"); $foo.push("654"); $.each(foo, function(i){ console.log("foo[%d]: object=%o; value=%s; string=%o", i, this, this, $(this).get()); // this.get() does not exist }); $foo.each(function(i){ console.log("$foo[%d]: object=%o; value=%s; string=%o", i, this, this, $(this).get()); // this.get() does not exist }); }); //--></script> </head> <body> </body> </html>

  Read the article

< Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >