Search Results

Search found 5695 results on 228 pages for 'logoff scripts'.

Page 173/228 | < Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >

• WDS's MDT DeploymentShare and REMINST replicated with DFS-R does not read WIM from local WDS

  - by mbrownnyc

  I've read several guides on using DFS-R with WDS and MDT to replicate REMINST and DeploymentShare, and I have a particularly strange problem. On the receiving server, after configuring WDS and mounting the DeploymentShare into MDT's DeploymentWorkbench, I also performed the following: 1) in .\Control\Bootstrap.ini, changed DeployRoot to \%wdsserver%\DeploymentShare$ 2) Changed the UNC path at the root of the MDT Deployment Share in the DeploymentWorkbench to match that of the current server. 3) In Unattend.xml files located: .\Control**, modified the following value to match the current server: <cpi:offlineImage catelog://HOST/ I am able to boot and grab the LiteTouch PE image off the local WDS TFTP server, but the WIM files, the scripts, everything else is being pulled off the WDS server at the remote site (the original WDS server that was the source of the files within the DFS-R replicated folder). What do I do in order to solve this problem? I've grepped all the files below the DeploymentShare to look for instances of the hostname of the WDS server at the remote site (the source of the files), but I found none. Here are the guides I referred to: http://technet.microsoft.com/en-us/library/cc771324%28WS.10%29.aspx http://blogs.technet.com/b/askds/archive/2009/12/16/wds-and-dfsr-love-at-first-sync.aspx http://oasysadmin.com/2011/11/03/copying-moving-and-replicating-the-mdt-2010-deployment-share/

  Read the article

• powershell v2 remoting - How do you enable unecrypted traffic

  - by Peter Walke

  I'm writing a powershell v2 script that I'd like to run against a remote server. When I run it, I get the error : Connecting to remote server failed with the following error message : The WinRM client cannot process the request. Unencrypted traffic is currently disabled in the client configuration. Change the client configurati on and try the request again. For more information, see the about_ Remote_Troubleshooting Help topic. I looked at the online help for about _ Remote_Troubleshooting, but it didn't point me towards how to enable unecrypted traffic. Below is the script that I'm using that is causing me problems. Note: I have already run Enable-PSRemoting on the remote machine to allow it to accept incoming requests. I have tried to use a session option variable, but it doesn't seem to make any difference. $key = "HKLM:\SOFTWARE\Microsoft\PowerShell\1\ShellIds" Set-ItemProperty $key ConsolePrompting True $tvar = "password" $password = ConvertTo-SecureString -string $tvar -asPlainText –force $username="domain\username" $mySessionOption = New-PSSessionOption -NoEncryption $credential = New-Object System.Management.Automation.PSCredential($username,$password) invoke-command -filepath C:\scripts\RemoteScript.ps1 -sessionoption $mySessionOption -authentication digest -credential $credential -computername RemoteServer How do I enable unencrypted traffic?

  Read the article

• Why does my PowerShell script hang when called in PSEXEC via a batch (.cmd) file?

  - by Kev

  I'm trying to remotely execute a PowerShell script using PSEXEC. The PowerShell script is called via a .cmd batch file. The reason we do this is to change the execution policy, run the powershell script then reset the execution policy again: On the remote server do-tasks.cmd looks like: powershell -command "&{ set-executionpolicy unrestricted}" powershell DoTasks.ps1 powershell -command "&{ set-executionpolicy restricted}" The PowerShell script DoTasks.ps1 just does this for now: Write-Output "Hello World!" Both of these scripts live in c:\windows\system32 (for now) just so they're on the PATH. On the originating server I do this: psexec \\web1928 -u administrator -p "adminpassword" do-tasks.cmd When this runs I get the following response at the command line: c:\Windows\system32>powershell -command "&{ set-executionpolicy unrestricted}" and the script runs no further. I can't ctrl-c to break the script and I just see ^C characters, I can type input from the keyboard and the characters are echoed to console. On the remote server I see that PowerShell.exe and CMD.exe are running in Task Manager's Process tab. If I end these processes then control returns to the command line on the originating server. I have tried this with just a simple .cmd batch file with a @echo hello world and it works just fine. Running do-tasks.cmd on the remote server via an RDP session works ok as well. Why is my remote batch file getting stuck when executing via PSEXEC?

  Read the article

• Apache2, FastCGI, PHP-FPM, APC on virtualmin panel with nginx front end reverse proxy

  - by Ünsal Korkmaz

  My dream setup: php 5.3.6 + mysql 5.5.10 on Apache2, FastCGI, PHP-FPM, APC with nginx 1.0 front end reverse proxy. And as free server management panel: Virtualmin GPL on centos 5.6 In a new centos 5.6 setup. Using this code for installing virtualmin: wget http://software.virtualmin.com/gpl/scripts/install.sh chmod +x install.sh ./install.sh After setup, i see php is 5.1 and mysql is 5.0 version. And system not supporting php-fpm but supporting fcgid wrapper. I did following changes: wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1.0-6.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh ius-release*.rpm epel-release*.rpm yum install yum-plugin-replace yum remove mysql.i386 yum replace mysql --replace-with mysql55 service mysqld restart chkconfig mysqld on mysql_upgrade --password=1234 yum replace php --replace-with php53u yum install php53u-fpm php53u-pecl-apc service httpd restart chkconfig php-fpm on service php-fpm start I am not sure why virtualmin installing both mysql.i386 and 64 bit version together but needed to remove one of them for using yum replace. So i had php 5.3.6 + mysql 5.5.10 with PHP-FPM, APC installed. But virtualmin not supporting PHP-FPM + fastcgi and its still running on fcgid. I am ultra newbie on server management so i couldnt find workaround after this. I want to switch fcgid wrapper to PHP-FPM + fastcgi at least for 1 virtual server. And if i can find a fix for this section, i want to setup nginx 1.0 as front end reverse proxy for serving static files and passing php files to apache. http://nginxcp.com/ is what i want but its for cpanel.

  Read the article

• How do I upgrade django on ubuntu 9.04?

  - by Lorin Hochstein

  I've got Django 1.0.2 installed on Ubuntu 9.04. I'd like to upgrade Django, because I have an app that needs Django 1.1 or greater. I tried using pip to do the upgrade, but got the following: $ sudo pip install Django==1.1 Downloading/unpacking Django==1.1 Downloading Django-1.1.tar.gz (5.6Mb): 5.6Mb downloaded Running setup.py egg_info for package Django Installing collected packages: Django Found existing installation: Django 1.0.2-final Not uninstalling Django at /var/lib/python-support/python2.6, outside environment /usr Running setup.py install for Django changing mode of build/scripts-2.6/django-admin.py from 644 to 755 changing mode of /usr/local/bin/django-admin.py to 755 Successfully installed Django It seems like it worked, but it refuses to remove the original Django 1.02, and sure enough: $ pip freeze | grep -i django Django==1.0.2-final django-debug-toolbar==0.8.3 django-sphinx==2.2.3 $ /usr/local/bin/django-admin.py --version 1.0.2 final The problem, apparently, is that pip won't uninstall files outside of /usr. I'd like to remove the existing Django files manually, but I have no idea how to do that, because I'm unfamiliar with how Python packages are laid out in Ubuntu. It looks pretty complicated. The site-packages directory is: $ python -c "from distutils.sysconfig import get_python_lib; print get_python_lib()" /usr/lib/python2.6/dist-packages However, that's not where the django files live: $ ls -ld /usr/lib/python2.6/dist-packages/[Dd]jango* ls: cannot access /usr/lib/python2.6/dist-packages/[Dd]jango*: No such file or directory There's a /var/lib/python-support/python2.6/django directory, and the __init__.py file in that directory points to /usr/share/python-support/python-django/django/__init__.py. Clearly, pip is able to figure out where the files live. Is there any way to retrieve the list of files associated with the django package so I can just delete them manually?

  Read the article

• error reading keytab file krb5.keytab

  - by Banjer

  I've noticed these kerberos keytab error messages on both SLES 11.2 and CentOS 6.3: sshd[31442]: pam_krb5[31442]: error reading keytab 'FILE: / etc/ krb5. keytab' /etc/krb5.keytab does not exist on our hosts, and from what I understand of the keytab file, we don't need it. Per this kerberos keytab introduction: A keytab is a file containing pairs of Kerberos principals and encrypted keys (these are derived from the Kerberos password). You can use this file to log into Kerberos without being prompted for a password. The most common personal use of keytab files is to allow scripts to authenticate to Kerberos without human interaction, or store a password in a plaintext file. This sounds like something we do not need and is perhaps better security-wise to not have it. How can I keep this error from popping up in our system logs? Here is my krb5.conf if its useful: banjer@myhost:~> cat /etc/krb5.conf # This file managed by Puppet # [libdefaults] default_tkt_enctypes = RC4-HMAC DES-CBC-MD5 DES-CBC-CRC default_tgs_enctypes = RC4-HMAC DES-CBC-MD5 DES-CBC-CRC preferred_enctypes = RC4-HMAC DES-CBC-MD5 DES-CBC-CRC default_realm = FOO.EXAMPLE.COM dns_lookup_kdc = true clockskew = 300 [logging] default = SYSLOG:NOTICE:DAEMON kdc = FILE:/var/log/kdc.log kadmind = FILE:/var/log/kadmind.log [appdefaults] pam = { ticket_lifetime = 1d renew_lifetime = 1d forwardable = true proxiable = false retain_after_close = false minimum_uid = 0 debug = false banner = "Enter your current" } Let me know if you need to see any other configs. Thanks. EDIT This message shows up in /var/log/secure whenever a non-root user logs in via SSH or the console. It seems to only occur with password-based authentication. If I do a key-based ssh to a server, I don't see the error. If I log in with root, I do not see the error. Our Linux servers authenticate against Active Directory, so its a hearty mix of PAM, samba, kerberos, and winbind that is used to authenticate a user.

  Read the article

• Mac OS X 10.6 Setup for Apache/MySQL/Perl

  - by Russell C.

  I just got a new Mac and have been trying to setup a local development environment for my perl applications for a few days now with no luck. I'm getting no where fast so I hope someone else who has done this successfully could help. I started by installing MAMP which I thought would take care of everything for me but unfortunately it doesn't take care of some important perl modules. I used CPAN to install all our required modules except that it seems DBD::mysql doesn't install correctly through CPAN. After reading a lot online, lots of people reported problems with this and recommended using MacPorts to install the module which I have tried doing with no luck using the following command: sudo port install p5-dbd-mysql After what seems like a successful install of DBD::mysql, Apache continues to report the following error when trying to run any of our Perl scripts: [Fri Apr 30 18:51:07 2010] [error] [client 127.0.0.1] install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /Library/Perl/Updates/5.10.0/darwin-thread-multi-2level /Library/Perl/Updates/5.10.0 /System/Library/Perl/5.10.0/darwin-thread-multi-2level /System/Library/Perl/5.10.0 /Library/Perl/5.10.0/darwin-thread-multi-2level /Library/Perl/5.10.0 /Network/Library/Perl/5.10.0/darwin-thread-multi-2level /Network/Library/Perl/5.10.0 /Network/Library/Perl /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level /System/Library/Perl/Extras/5.10.0 .) at (eval 1835) line 3. [Fri Apr 30 18:51:07 2010] [error] [client 127.0.0.1] Perhaps the DBD::mysql perl module hasn't been fully installed, [Fri Apr 30 18:51:07 2010] [error] [client 127.0.0.1] or perhaps the capitalisation of 'mysql' isn't right. [Fri Apr 30 18:51:07 2010] [error] [client 127.0.0.1] Available drivers: DBM, ExampleP, File, Gofer, Proxy, SQLite, Sponge. I'm not sure where to go from here but my Mac isn't much of a development environment if Perl isn't able to talk to the database. I'd really appreciate any help and advice you might be able to provide in getting my system setup successfully. Thanks in advance!

  Read the article

• Do we need to explicitly pass php.ini's location to php-fpm?

  - by F21

  I am seeing a strange issue where my php.ini is not used if I do not explicitly pass it to php-fpm when starting it. This is the upstart script I am using: start on (filesystem and net-device-up IFACE=lo) stop on runlevel [016] pre-start script mkdir -p /run/php end script expect fork respawn exec /usr/local/php/sbin/php-fpm --fpm-config /etc/php/php-fpm.conf If PHP is started with the above, my php.ini is never used, even though it is in Configuration File (php.ini) Path. This is the relevant part from phpinfo(): Configuration File (php.ini) Path /etc/php/ Loaded Configuration File (none) Scan this dir for additional .ini files (none) Additional .ini files parsed (none) If I modify the last line of the upstart script to point php-fpm to php.ini explicitly: exec /usr/local/php/sbin/php-fpm --fpm-config /etc/php/php-fpm.conf -c /etc/php/php.ini Then we see that the php.ini is loaded: Configuration File (php.ini) Path /etc/php/ Loaded Configuration File /etc/php/php.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) Why is this the case? Is this a quirk in php-fpm? Minor update: This also seems to be a problem for php5-fpm installed using apt-get. I did a test install in a Ubuntu Server 12.04 virtual machine by running the following: sudo apt-get install nginx php5-fpm PHP-FPM and nginx were started after installation and everything seemed fine. I then uncommented php's settings in nginx's configuration and placed a test phpinfo() file to inspect PHP's settings. The relevant bits are: Configuration File (php.ini) Path /etc/php5/fpm Loaded Configuration File (none) Scan this dir for additional .ini files /etc/php5/fpm/conf.d Additional .ini files parsed /etc/php5/fpm/conf.d/10-pdo.ini I noted that no php.ini was loaded either. However, if I go to /etc/php5/fpm, I can see that a php.ini exists. I also checked the start up scripts for PHP-FPM and the -c parameter was not used to link the ini file to PHP. This can potentially be confusing for people who would expect php.ini to be loaded automatically by PHP-FPM.

  Read the article

• How to use Salt Stack with minions all behind NAT (not publicly accessible, default salt ports not open)?

  - by MountainX

  Can Salt Stack minions communicate with the salt master from behind NAT/Firewalls, etc., using standard ports that would be open be default in all consumer NAT routers (and without the minions having a public DNS record or static IP)? I'm working my way through my first salt tutorial, and this is where I'm stuck. I am able to configure iptables on the Ubuntu salt-master. But I have no control over the routers/NAT that the minions will sit behind. So far I tried these settings: /etc/salt/master: publish_port: 465 ret_port: 443 /etc/salt/minion: master_port: 465 That did not work. Background: I have a custom developed application presently running on about 40 Kubuntu laptops (& more planned). Every few months I have to update the application. (Often this just amounts to replacing a .jar file, which requires root permissions.) I also have to run Ubuntu updates and a few other minor things. I've been doing it manually, one by one, using Team Viewer to log into each client. I would like to dramatically improve this process. The two options I'm aware of are either: use reverse ssh tunnels and bash scripts. I tested this and it works. But I don't get any of the reporting, etc., I would get with Salt Stack. use Salt Stack (or similar) management tool. But I need a really simple tool. I can't invest any time in a big learning curve. I looked at Puppet and a bunch of related tools. The only one I found that looked simple enough for me (so far) was Salt Stack. But I'm stuck now because my minion can't reach the salt-master, as stated above. I appreciate suggestions.

  Read the article

• Disable local delivery in Sendmail

  - by Luke P M

  I am using Sendmail on a Centos server to send email for PHP scripts, but the problem is that mail is delivered to a local mailbox on the machine rather than what is specified in the MX records for the domain - which actually point to another machine I use for email. I would like sendmail to not try and locally deliver mail for the domain the machine is setup for, is there a simple way to disable local delivery? The domain is not in the local-host-names file. I've already done lots of googling and I have looked at: http://serverfault.com/questions/26934/sendmail-configuration-to-not-deliver-mail-to-local-machine http://serverfault.com/questions/65365/disable-local-delivery-in-sendmail But either there is no answer or it is not suitable. I don't want to relay to another server, i just want it to send mail regardless of domain. To provide an example: I have two servers, one is the mail server at mail.example.com and a web server which is example.com, when I use the smtp service on the web server it currently routes mail to a local mailbox on example.com, but it should be going to mailboxes on mail.example.com Output of sendmail -bt returns: ADDRESS TEST MODE (ruleset 3 NOT automatically invoked) Enter 3,0 [email protected] canonify input: info @ example . com Canonify2 input: info Canonify2 returns: info canonify returns: info parse input: info Parse0 input: info Parse0 returns: info ParseLocal input: info ParseLocal returns: info Parse1 input: info Parse1 returns: $# local $: info parse returns: $# local $: info

  Read the article

• How to execute msdb.dbo.sp_start_job from a stored procedure in user database in sql server 2005

  - by Ram

  Hi Everyone, I am trying to execute a msdb.dbo.sp_start_Job from MyDB.dbo.MyStoredProc in order to execute MyJob 1) I Know that if i give the user a SqlAgentUser role he will be able to run the jobs that he owns (BUT THIS IS WHAT I OBSERVED : THE USER WAS ABLE TO START/STOP/RESTART THE SQL AGENT SO I DO NOT WANT TO GO THIS ROUTE) - Let me know if i am wrong , but i do not understand why would such a under privileged user be able to start/stop agents . 2)I know that if i give execute permissions on executing user to msdb.dbo.Sp_Start_job and Enable Ownership chaining or enable Trustworthy on the user database it would work (BUT I DO NOT WANT TO ENABLE OWNERSHIP CHAINING NOR TRUSTWORTHY ON THE USER DATABASE) 3)I this this can be done by code signing User Database i)create a stored proc MyDB.dbo.MyStoredProc ii)Create a certificae job_exec iii)sign MyDB.dbo.MyStoredProc with certificate job_exec iv)export certificate msdb i)Import Certificate ii)create a derived user from this certificate iii)grant authenticate for this derived user iv)grant execute on msdb.dbo.sp_start_job to the derived user v)grant execute on msdb.dbo.sp_start_job to the user executing the MyDB.dbo.MyStoredProc but i tried it and it did not work for me -i dont know which piece i am missing or doing wrong so please provide me with a simple example (with scripts) for executing msdb.dbo.sp_start_job from user stored prod MyDB.dbo.MyStoredProc using code signing Many Many Many Thanks in Advance Thanks Ram

  Read the article

• How do I host node.js apps with pm2 without running them as root?

  - by jishi

  I have setup pm2 to run a node.js application, and I can successfully start it and it will resurrect upon reboot. However, the pm2 daemon is ran as root, which makes me think that all my node-scripts also runs as root? Even though I added them as a regular user in the system. The log files and stuff is created in the users home dir, /~/.pm2/logs, but the logs are owned by root. when I invoke pm2 startup (which handles the installation of the init.d script etc), it creates /etc/init.d/pm2-init.sh which looks like this: #!/bin/bash # chkconfig: 2345 98 02 # # description: PM2 next gen process manager for Node.js # processname: pm2 # ### BEGIN INIT INFO # Provides: pm2 # Required-Start: # Required-Stop: # Should-Start: # Should-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: PM2 init script # Description: PM2 is the next gen process manager for Node.js ### END INIT INFO NAME=pm2 PM2=/usr/local/lib/node_modules/pm2/bin/pm2 NODE=/usr/local/bin/node export HOME="/root" start() { echo "Starting $NAME" $NODE $PM2 stopAll $NODE $PM2 resurrect } stop() { $NODE $PM2 dump $NODE $PM2 stopAll } restart() { echo "Restarting $NAME" stop start } status() { echo "Status for $NAME:" $NODE $PM2 list RETVAL=$? } case "$1" in start) start ;; stop) stop ;; status) status ;; restart) restart ;; *) echo "Usage: {start|stop|status|restart}" exit 1 ;; esac exit $RETVAL When I dump the processes (which is what it will use when resurrecting the processes), I see mentions of user "USER":"pi" but I don't think that it's actually run as user pi. Any thoughts?

  Read the article

• Restarting Haproxy Gracefully

  - by Anand Gupta

  As per various blogs, HAproxy can be gracefully restarted using the following command: sudo haproxy -f /etc/haproxy/haproxy.cfg -p /var/run/haproxy.pid -sf $(cat /var/run/haproxy.pid) TO verify this, I had set up a apache bench script which contiguously sent message to haproxy. Ideally, whenever I restarted my server the script should not have an affect on the apache bunch execiton. But, it seems that whenever Haproxy is restarted apache bench scripts terminate and the connection to load balancer is lost. Here is the details of my HaProxy configuration file : global nbproc 4 log 127.0.0.1 local0 log 127.0.0.1 local1 notice #log loghost local0 info maxconn 4096 #chroot /usr/share/haproxy user haproxy group haproxy daemon pidfile /var/run/haproxy.pid stats socket /home/ubuntu/haproxy.sock #debug #quiet defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 listen webstats bind 0.0.0.0:1000 stats enable mode http stats uri /lb?stats stats auth anand:aaaaaaaa #stats refresh listen web-farm 0.0.0.0:80 mode http balance roundrobin option httpchk HEAD /index.php HTTP/1.0 server server2.com 1.1.1.1:80 server serve1.com 1.1.1.2:80 ~ Please let me know what am I missing here.

  Read the article

• psexec: "Access is Denied"?

  - by Electrons_Ahoy

  Inspired by my previous question here, I've been experimenting with PSExec. The goal is to trip off some fairly simple scripts / programs on one WindowsXP machine from another, and as PowerShell 2 doesn't yet do remoting on XP, PSexec seems like it'll solve my problems nicely. However, I can't get anything but the "Access is Denied" error. Here's what I've tried so far: I've got a pair of WindowsXP MCE machines, networked together in a workgroup without a server or domain controller. I've turned off "simple file sharing" on both machines. Under the security policy, Network Access: Sharing and Security model for local accounts is set to Classic, not Guest for both machines. There is an Administrative user for each computer that I know the passwords to. :) With all that, a command like "> psexec \\otherComputer -u adminUser cmd" prompts for the password (like it should) and then exits with: Couldn't access otherComputer: Access is denied. So, at this point I turn to the community. What step am I missing here?

  Read the article

• Configuring ASP.NET MVC2 on Apache 2.2 using mod_aspdotnet

  - by user40684

  Trying to get an MVC2 website to run on Apache 2.2 web server (running on Windows) that utilizes the mod_aspdotnet module. Have several ASP.NET Virtual Hosts running, trying to add another. MVC2 has NO default page (like the first version of MVC had e.g default.aspx). I have tried various changes to the config: commented out 'DirectoryIndex', changed it to '/'. Set 'ASPNET' to 'Virtual', will not load first page, always get: '403 Forbidden, You don't have permission to access / on this server.' Below is from my http.conf: LoadModule aspdotnet_module "modules/mod_aspdotnet.so" AddHandler asp.net asax ascx ashx asmx aspx axd config cs csproj licx rem resources resx soap vb vbproj vsdisco webinfo <IfModule aspdotnet_module> # Mount the ASP.NET /asp application #AspNetMount /MyWebSiteName "D:/ApacheNET/MyWebSiteName.com" Alias /MyWebSiteName" D:/ApacheNET/MyWebSiteName.com" <VirtualHost *:80> DocumentRoot "D:/ApacheNET/MyWebSiteName.com" ServerName www.MyWebSiteName.com ServerAlias MyWebSiteName.com AspNetMount / "D:/ApacheNET/MyWebSiteName.com" # Other directives here <Directory "D:/ApacheNET/MyWebSiteName.com"> Options FollowSymlinks ExecCGI AspNet All #AspNet Virtual Files Directory Order allow,deny Allow from all DirectoryIndex default.aspx index.aspx index.html #default the index page to .htm and .aspx </Directory> </VirtualHost> # For all virtual ASP.NET webs, we need the aspnet_client files # to serve the client-side helper scripts. AliasMatch /aspnet_client/system_web/(\d+)_(\d+)_(\d+)_(\d+)/(.*) "C:/Windows /Microsoft.NET/Framework/v$1.$2.$3/ASP.NETClientFiles/$4" <Directory "C:/Windows/Microsoft.NET/Framework/v*/ASP.NETClientFiles"> Options FollowSymlinks Order allow,deny Allow from all </Directory> </IfModule> Has anyone successfully run MVC2 (or the first version of MVC) on Apache with the mod_aspdotnet module? Thanks !

  Read the article

• What kind of “sysadmin stuff” should I show to students during a talk?

  - by Gregory Eric Sanderaon

  A teacher asked me If I could talk about my job as a linux sysadmin in his class. The course is called "Introduction to Operating systems" and i've been given 45 minutes to talk. The students are beginning their second year, so they've had a bit of experience with programming in different languages. What i'm like to do is show a series of hands-on examples of the kinds of things I do on a regular basis. I've already got a few ideas jotted down, but I'm afraid that they might be either too advanced or too simple for the students to appreciate. Another concern is that a topic might be too long to explain and use too much time overall. Here are a few ideas : Program deployment using version control (git in my case) filtering apache logs using grep, awk, uniq, tail A couple of bash scripts that i've made for various stuff on servers live montitoring (htop, iotop, iptraf) creating databases and assigning roles in mysql/postgresql So, are these ideas any good ? Do you have better ideas ? are the ideas too simple and should I go for more "advanced" stuff ?

  Read the article

• Backup Gmail using Mail.app and IMAP without redundancy

  - by Cawas

  I don't care for actually using mail app, I use mostly the gmail interface and mail app just for offline, for quickly reading and eventually replying. Everything is working fine, I think I've followed every guide out there... Here's a great one. But I could find nothing about avoiding redundancy. Well, I can manually do that either by using POP or by checking off most of my labels out of IMAP. But I do use a lot of labels and I often label messages with more than 1 label. And I want them on mail app. Is there anyway to make it keep just 1 copy of repeated messages? Maybe there's a message id or checksum that could be used... If there isn't a way to do it, be assured I still prefer having the extra messages and "wasting" space rather than not having any. edit: I've came across many solutions for finding duplicate files, but they just delete the files. That just make things worst: Mail will just sync it all again. I've realized it's probably better to keep two accounts setup, POP for backup and IMAP for everything else with removing the "All Mail" from it. That's because if the "All Mail" on the server is deleted for any reason, my "All Mail" local will also get deleted, while POP will keep all files regardless of the server. This doesn't solve the redundancy issue at all, but it doesn't create any new issue as well, and I can even use the search properly, without duplicated results, if I search just on the POP. So it helps optimizing a little bit. But I still think the best way to solve this issue would be having something such as aamann's Mail Scripts tweaked to hardlinking the duplicates rather than deleting, and optimized to not need to scan everything every time. I'm trying to contact him and see what we can do. At any pace, I'm still looking for an answer!

  Read the article

• Screen scraping software that will traverse pages

  - by nilbus

  We're creating a mashup site that pulls information from many sources all over the web. Many of these sites don't provide RSS feeds or APIs to access the information they provide. This leaves us with screen scraping as our method for collecting the data. There are many scripting tools out there written in different scripting languages for screen scraping that require you to write scraping scripts in the language the scraper was written in. Scrapy, scrAPI, and scrubyt are a few written in Ruby and Python. There are other web-based tools I've seen like Dapper that create XML or RSS feeds based on a webpage. It has a beautiful web-based interface that requires no scripting skills to use. This would be a great tool, if it were able to traverse multiple pages to gather data from hundreds pages of results. We need something that will scrape information from paginated web sites, much like scrubyt, but with a user interface that a non-programmer could use. We'll script up our own solution if we need to, probably using scrubyt, but if there's a better solution out there, we want to use it. Does anything like this exist?

  Read the article

• Windows Server 2008 R2 Print Server - Change Printer Names on All Client Systems

  - by Jeramy

  I have a Windows Server 2008 R2 print server set up hosting out multiple printers to my end users. I would like to change the naming convention for all of the printers hosted on the print server and want this change reflected on the client end. For example: I have a HP4000 printer named "Cottage" on the print server. I want to rename the printer "HR-1stFloor-220a" on the print server and I want this printer to appear on every client system with the new name. Simply renaming the printer on the server automatically creates a link from the old printer name to the new one, so all the clients work but the actual name, from their perspective, has not changed. Renaming the share name also does not visibly effect the end user (though it does update the port information). I would like to have the names of the printers be meaningful information regarding department and location, but this means that when they change hands or move I would need to update this information, and currently I am not seeing a way short of writing custom start-up scripts and remove/replacing them through AD. Is there a simple way of accomplishing this task? Thank you for your help.

  Read the article

• Authentication on Exchange using EWS managed API

  - by Jacob Proffitt

  I'm having a weird issue with the Exchange Web Services. The operation I'm attempting is pretty simple—pull a user's calendar items for the current week on our internal website. When testing locally, the ews managed API pulls the calendar information just fine. When deployed to the web server (using integrated windows authentication), it chokes. My trace is telling me that access is denied in the Exchange call. Initially, I thought this was a double-hop NTLM permissions issue, but it turns out that the service actually works for some internal users, but not for most. The only thing I can find that the functioning users have in common is that they are blackberry users and I surmise that their exchange permissions are setup differently. Or are their active directory accounts setup differently? I don't know and it's driving me crazy. I surmise that the blackberry app runs some scripts when a user is added to the application, but I'm completely unfamiliar with what may be going on behind the scenes there. So. Is there a way to duplicate the permissions those users enjoy (either AD or Exchange permissions)? And/or how exactly does one fix the double-hop credentials situation?

  Read the article

• Scripting an automated SQLServer 2008 DR move

  - by ItsAMystery

  Hi All We use the built in logshipping in SQLServer to logship to our DR site but once in a month do a DR test which requires us to move back and forth between our Live and BAckup servers. We run multiple (30) databases on the system so manually backing up the final logs and disabling the jobs is too much work and takes too long. I though no problem, I will script it but have run into trouble with it always complaninig that the final logship is too early to apply even though I dont export the final log until putting the database into norecovery mode. Firstly, does any one no a simple and reliable way of doing this? I have lokoed at some 3rd party software (redgate sqlbackup I think it was) but that didnt make it easy in this situation either. What I want to be able to do is basically run a script (a series of stored procedures) to get me to DR and run another to get me back with no dataloss. My scripts are very simplistic at the moment but here they are: 2 servers Primary Paris Secondary ParisT The StartAgentJobAndWait is a script written by someone else (ta) and just checks the jobs have finished or quits it if it never ends. At the moment I am just using a test database called BOB2 but if I can get it working will pass in the database and job names. from PARIS: /* Disable backup job */ exec msdb..sp_update_job @job_name = 'LSBackup_BOB2', @enabled = 0 exec PARIST.msdb..sp_update_job @job_name = 'LSCopy_PARIS_BOB2', @enabled = 0 exec PARIST.msdb..sp_update_job @job_name = 'LSRestore_PARIS_BOB2', @enabled = 0 exec PARIST.master.dbo.DRStage2 ParisT DRStage2 DECLARE @RetValue varchar (10) EXEC @RetValue = StartAgentJobAndWait LSCopy_PARIS_BOB2 , 2 SELECT ReturnValue=@RetValue if @RetValue = 1 begin print 'The Copy Task completed Succesffuly' END ELSE print 'The Copy task failed, This may or may not be a problem, check restore state of database' SELECT @RetValue = 0 EXEC @RetValue = StartAgentJobAndWait LSRestore_PARIS_BOB2 , 2 SELECT ReturnValue=@RetValue if @RetValue = 1 begin print 'The Restore Task completed Succesffuly' END ELSE print 'The Copy task failed, This may or may not be a problem, check restore state of database' exec PARIS.master.dbo.DRStage3 /* Do the last logship and move it to Trumpington */ BACKUP log "BOB2" to disk='c:\drlogshipping\BOB2.bak' with compression, norecovery EXEC xp_cmdshell 'copy c:\drlogshipping \\192.168.7.11\drlogshipping' EXEC PARIST.master.dbo.DRTransferFinish AS BEGIN restore database "BOB2" from disk='c:\drlogshipping\bob2.bak' with recovery

  Read the article

• How can I install Satchmo?

  - by Jonathan Hayward

  I am trying to install Satchmo 0.9 on an Ubuntu 9.10 guest off of the instructions at http://bitbucket.org/chris1610/satchmo/downloads/Satchmo.pdf. I run into difficulties at 2.1.2: pip install -r http://bitbucket.org/chris1610/satchmo/raw/tip/scripts/requirements.txt pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo The first command fails because a compile error for how it's trying to build PIL. So I ran an "aptitude install python-imaging", locally copy the first line's requirements.text, and remove the line that's unsuccessfully trying to build PIL. The first line completes without error, as does the second. The next step tells me to change directory to the /path/to/new/store, and run: python clonesatchmo.py A little bit of trouble here; I am told that clonesatchmo.py will be in /bin by now, and it isn't there, but I put some Satchmo stuff under /usr/local, create a symlink in /bin, and run: python /bin/clonesatchmo.py This gives: jonathan@ubuntu:~/store$ python /bin/clonesatchmo.py Creating the Satchmo Application Traceback (most recent call last): File "/bin/clonesatchmo.py", line 108, in <module> create_satchmo_site(opts.site_name) File "/bin/clonesatchmo.py", line 47, in create_satchmo_site import satchmo_skeleton ImportError: No module named satchmo_skeleton A find after apparently checking out the repository reveals that there is no file with a name like satchmo*skeleton* on my system. I thought that bash might be prone to take part of the second pip invocation's URL as the beginning of a comment; I tried both: pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9\#egg=satchmo pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo Neither way of doing it seems to take care of the import error mentioned above. How can I get a Satchmo installation under Ubuntu, or at least enough of a Satchmo installation that I am able to start with a skeleton of a store and then flesh it out the way I want? Thanks, Jonathan

  Read the article

• Cygwin - Repo with Separate Git/Working Dir Doesn't Work

  - by Kyle Lacy

  Since I've switched to OS X and Vim, I've found it easiest to manage all of my 'dotfiles' (all of my configuration files and miscellaneous scripts) with Git. Having already set up my dotfiles in a repo following this tutorial, I figured it would also be easy enough to migrate all of my settings into my Cygwin setup on my Windows partition. Already having the repo setup on Github, I simply clone'd the repo, and moved all of the files over to my home directory, making it a mirror of my OS X home directory. Unfortunately, I cannot seem to use the actual repo any further within Cygwin. The problem is that I cannot use my dotfiles repo with git within Cygwin. The setup is unique from most normal git repos, in that the working directory and the git directory are in different locations. Specifically, the working directory is $HOME (/Users/kyle on OS X, /home/kyle in Cygwin), and the git repo is $HOME/.dotfiles.git. So, if I wanted to get the status of the repo, for example, I would type the following command (which I alias to reduce typing, of course): git --work-tree=$HOME --git-dir=$HOME/.dotfiles.git status -uno While this works fine on OS X, this refuses to work within Cygwin. Regardless of whether or not I use my alias, or whether or not I substitute $HOME by hand, I get the following git error: fatal: Not a git repository: /home/Kyle/dotfiles/.git/modules/.build/git I don't understand where this error comes from, but the path /home/Kyle/dotfiles was the original location of the git repo when I initially cloned it. Additionally, it's important to note that the repo relies heavily on submodules. If specifics are necessary, the repo in question can be found on GitHub. The commands I ran to setup the repo in Cygwin can also be found within the Readme file.

  Read the article

• Sun-JRE on CentOS-4.8 RPM error: post-install scriptlet failed, exit status 5

  - by Emyr

  I have a server with CentOS 4.8 installed. The provided is rubbish, but there's only a few months left, and they're busy being sued by Chase bank, so I doubt I can get CentOS 5. I wiped the server clean using Virtuozzo, and found that the default image is VERY empty. I even had to install yum myself. I've reached the point where I want to install TomCat. I downloaded the Sun JRE as a .rpm.bin file, did chmod a+x and ran it. That produced a .rpm file, which I tried installing: [root@host java]# rpm -Uvh jre-6u20-linux-i586.rpm Preparing... ########################################### [100%] 1:jre ########################################### [100%] Unpacking JAR files... rt.jar... jsse.jar... charsets.jar... localedata.jar... plugin.jar... javaws.jar... deploy.jar... error: %post(jre-1.6.0_20-fcs.i586) scriptlet failed, exit status 5 [root@host java]# rpm -evv jre-6u20-linux-i586.rpm D: opening db environment /var/lib/rpm/Packages joinenv D: opening db index /var/lib/rpm/Packages rdonly mode=0x0 D: locked db index /var/lib/rpm/Packages D: opening db index /var/lib/rpm/Name rdonly mode=0x0 error: package jre-6u20-linux-i586.rpm is not installed D: closed db index /var/lib/rpm/Name D: closed db index /var/lib/rpm/Packages D: closed db environment /var/lib/rpm/Packages [root@host java]# rpm -qi --scripts jre-6u20-linux-i586.rpm package jre-6u20-linux-i586.rpm is not installed [root@host java]# I couldn't find any results on Google for any parts of that error message, and I have very little experience of rpm (I usually use Debian). Is this a broken package, or am I missing something or some setting?

  Read the article

• Exim service cPanel error

  - by Luka

  I cleaned out some logs from my cPanel dedicated server From here http://linuxhostingsupport.net/blog/log-files-on-a-cpanel-server i deleted all log listed at that link. Problem is with EXIM process it can not shut down, but it can run. When I try to send Email from roundcube, horde or via smtp it is down. 25 port is down, I can not receive, or send mails. But 1 minute before cleaning logs I received mails and I could send mails. what is problem, I just deleted logs... When I try service exim restart. I get: Shutting down clamd: [ OK ] Shutting down exim: [FAILED] Shutting down spamd: [ OK ] Starting clamd: [ OK ] Starting exim: [ OK ] 0 processes (antirelayd) sent signal 9 /usr/local/cpanel/scripts/update_sa_rules: running in background Exim log: 2012-10-20 03:06:14 cwd=/ 3 args: /usr/sbin/exim -bd -q1h 2012-10-20 03:06:24 cwd=/ 3 args: /usr/sbin/exim -bd -q1h 2012-10-20 03:06:32 cwd=/ 3 args: /usr/sbin/exim -bd -q1h 2012-10-20 03:06:34 cwd=/ 2 args: /usr/sbin/sendmail -t 2012-10-20 03:08:20 cwd=/ 3 args: /usr/sbin/exim -bd -q1h 2012-10-20 03:11:37 cwd=/ 2 args: /usr/sbin/sendmail -t 2012-10-20 03:13:45 cwd=/ 3 args: /usr/sbin/exim -bd -q1h 2012-10-20 03:14:01 cwd=/ 3 args: /usr/sbin/exim -bd -q1h 2012-10-20 03:14:28 cwd=/home/pegaz/public_html 3 args: /usr/sbin/sendmail -t -i 2012-10-20 03:21:43 cwd=/ 3 args: /usr/sbin/exim -bd -q1h

  Read the article

< Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >