Search Results

Search found 65649 results on 2626 pages for 'boot time'.

Page 174/2626 | < Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >

  • No video signal at boot with custom built computer

    - by Bart Pelle
    After booting my custom built computer, neither the VGA nor the HDMI methods from the video card seem to emit any signal to the display. I have tested both a regular VGA screen and a modern HDMI screen. Both did not receive signal. Below are the specifications from my computer build: Intel Core i5 3350P ASRock B75 Pro 3-M Seagate Barracuda 7200.14 ST1000 DM003 1000GB Corsair Vengeance LP CML 8GX 3M2 A1600 CGB Blue (2 cards) Cooler Master B Series B600 Club 3D Radeon HD7870 XT Jokercard Samsung SH-224 BB Black Sharkoon T28 Case The motherboard does not emit any beeps on startup. The CD tray opens properly and all fans spin. All cables are properly connected. All components are new and no damage was found on any of the components. The fans on the GPU spin aswell. The VGA test we did was by using the onboard graphics from the Intel i5, but this gave no result. The HDMI test was from the GPU which did not emit any signal either. We have not been able to test out the DVI, could this be important to test, even though all the other methods did not work? Thank you for your time and hopefully reply.

    Read the article

  • configure a Macbook Pro to use external monitor at boot (Debian Linux)

    - by Eric
    In the spirit of reuse, I've installed Debian (version 6.0.5 "squeeze") on my wife’s old Macbook Pro (circa 2009 or so), to repurpose it for various tasks. The catch is the display is flaky. It will last a random amount of time, between 2 minutes and 2 hours, before freezing and graying out. This is a known issue with that generation of MBP. Fortunately it’s no problem for me, as I plan to use it with an external monitor anyway. Which brings us to the problem: How do I configure this thing to output to the external display by default, and hopefully disable the built-in LCD? The ideal solution would be to modify a setting in the EFI (BIOS), but I’m not holding out much hope for that. Next best thing would be a kernel option I can pass to the NVIDIA driver. What won’t work is a solution that doesn’t give me a display until X starts. I need to have console access, especially given that the built-in LCD is dying, and any day now might give out completely. So far I haven’t been able to find anything online. lspci says I’ve got an NVIDIA GeForce 9400M Help is much appreciated! Eric PS if this question is better suited to the Unix & Linux area, pls advise and I will move it.

    Read the article

  • Work time in fullcalendar [Solution]

    - by Zozo
    Full calendar have no included options to work-time feature (selecting first and last rows in agenda view for any day - where in example company is not working). I managed something like that: viewDisplay: function(view){ $.ajax({ url: 'index.php?r=calendar/Default/worktime', dataType: 'json', success: function(data){ if(view.name=='agendaWeek') selectWorkTime(data, 30, 0, 24, false); else if(view.name=='agendaDay') selectDayWorkTime(data, 30, 0, 24, view, false); } }); } Where index.php?r=calendar/Default/worktime is php file returning json. It looks like that: $arr = array( 'mon' => array('8:00', '17:00'), 'tue' => array('9:00', '15:00'), 'wed' => array('9:30', '19:00'), 'thu' => array('6:00', '14:00'), 'fri' => array('0:00', '24:00'), 'sat' => array('9:00', '14:00'), 'sun' => array() ); foreach ($arr as &$day){ foreach($day as &$hour){ $tmp = explode(':', $hour); $hour = $tmp[0] * 3600 + $tmp[1] * 60; } } print json_encode($arr); and at the end, some functions using for counting and selecting work-time: function selectDayWorkTime(timeArray, slotMinutes, minTime, maxTime, viewObject, showAtHolidays){ var dayname; $('.fc-content').find('.fc-view-agendaWeek').find('.fc-agenda-body') .children('.fc-work-time').remove(); $('.fc-content').find('.fc-view-agendaDay') .find('.fc-work-time-day').removeClass('fc-work-time-day'); switch(viewObject.start.getDay()){ case 1: dayname='mon'; break; case 2: dayname='tue'; break; case 3: dayname='wed'; break; case 4: dayname='thu'; break; case 5: dayname='fri'; break; case 6: dayname='sat'; break; case 0: dayname='sun'; break; } for(var day in timeArray){ if(day == dayname){ if($('.fc-content').find('.fc-view-agendaDay').find('.fc-'+day).attr('class').search('fc-holiday') == -1 || showAtHolidays){ var startBefore = 0; var endBefore = timeArray[day][0] / (60 * slotMinutes) - (minTime * 60) / slotMinutes; var startAfter = timeArray[day][1] / (60 * slotMinutes) - (minTime * 60) / slotMinutes; var endAfter = (maxTime - minTime) * 60 / slotMinutes - 1; for(startBefore; startBefore < endBefore; startBefore++){ $('.fc-view-agendaDay').find('.fc-slot'+startBefore).find('div').addClass('fc-work-time-day'); } for(startAfter; startAfter <= endAfter; startAfter++){ $('.fc-view-agendaDay').find('.fc-slot'+startAfter).find('div').addClass('fc-work-time-day'); } } } } } function selectWorkTime(timeArray, slotMinutes, minTime, maxTime, showAtHolidays){ for(var day in timeArray){ var startBefore = 0; var endBefore = timeArray[day][0] / (60 * slotMinutes) - (minTime * 60) / slotMinutes; var startAfter = timeArray[day][1] / (60 * slotMinutes) - (minTime * 60) / slotMinutes; var endAfter = (maxTime - minTime) * 60 / slotMinutes - 1; if(startBefore > endBefore) endBefore = startBefore; if(startAfter > endAfter) startAfter = endAfter; try{ selectCell(startBefore, endBefore, 'fc-'+day, 'fc-work-time', false, showAtHolidays); selectCell(startAfter, endAfter, 'fc-'+day, 'fc-work-time', true, showAtHolidays); } catch(e){ continue; } } } function selectCell(startRowNo, endRowNo, collClass, cellClass, closeGap, showAtHolidays){ $('.fc-content').find('.fc-view-agendaWeek').find('.fc-agenda-body') .children('.'+cellClass+''+startRowNo+''+collClass).remove(); $('.fc-content').find('.fc-view-agendaDay') .find('.fc-work-time-day').removeClass('fc-work-time-day'); if($('.fc-content').find('.fc-view-agendaWeek').find('.'+collClass).attr('class').search('fc-holiday') == -1 || showAtHolidays){ var width = $('.fc-content').find('.fc-view-agendaWeek') .find('.'+collClass+':last').width(); var height = 0; if(closeGap && (startRowNo != endRowNo)){ height = $('.fc-content').find('.fc-view-agendaWeek') .find('.fc-slot'+ startRowNo).height(); } $('.fc-view-agendaWeek').find('.fc-agenda-body').prepend('<div class="'+cellClass+' ' + ''+cellClass+''+startRowNo+''+collClass+'"></div>'); $('.'+cellClass).width(width - 2); height += $('.fc-content').find('.fc-view-agendaWeek') .find('.fc-slot'+ endRowNo).position().top - $('.fc-content').find('.fc-view-agendaWeek') .find('.fc-slot'+ startRowNo).position().top; $('.'+cellClass+''+startRowNo+''+collClass).height(height); $('.'+cellClass+''+startRowNo+''+collClass) .css('margin-top', $('.fc-content').find('.fc-view-agendaWeek') .find('.fc-slot'+ startRowNo).position().top); $('.'+cellClass+''+startRowNo+''+collClass) .css('margin-left', $('.fc-content').find('.fc-view-agendaWeek') .find('.'+collClass+':last').offset().left - width / 2); } } Don't forget about CSS: .fc-work-time-day{ background-color: yellow; opacity: 0.3; filter: alpha(opacity=30); /* for IE */ } .fc-work-time{ position: absolute; background-color: yellow; z-index:10; margin: 0; padding: 0; text-align: left; z-index: 0; opacity: 0.3; filter: alpha(opacity=30); /* for IE */ } So, I've got some questions about - is the other way to make the same, but no using absolute div's in agendaWeek? And... How can I get in viewDisplay function actual slotMinutes, minTime and maxTime

    Read the article

  • Motorola NVG510 bridge mode

    - by Blacklight Shining
    I have a Motorola NVG510 modem from AT&T, and I would like to disable all routing functions and use it as just a modem. I have a Time Capsule that's already connected and broadcasting its own wireless network, which is how I've been connecting (it's been reporting a double-NAT error, which I assume is from the NVG510 also acting as a router). I followed the instructions in question six here, and I can connect as I did before, but my Time Capsule still has a double-NAT error. How do I put the NVG510 into bridge mode or otherwise fix the double-NAT error? (No, ignoring it does not count as a fix.)

    Read the article

  • Cannot access Ubuntu 10/04 after reinstalling Windows

    - by meyosef
    I had Windows Vista Home Premium on HP pavilion desktop. I partitioned the disk for Ubuntu and a swap disk partition and then I installed Ubuntu 10.04. When I would start my computer, I would be given a choice to start Windows or Ubuntu. Today I reinstalled Windows, and now the menu has disappeared. I don't see in windows the disk partition that I allocated to Ubuntu, so it means Ubuntu still exist but I can't load it. What can I do ?

    Read the article

  • Powermac G4 Booting Up to White Screen?

    - by David
    I have a Powermac G4 that I use as a server. Since yesterday, for any reason, it chimes, and just goes to a white screen. The only way to make it work again is to reset the PMU by holding the button inside for 10 seconds. It is running 10.4.11.

    Read the article

  • UNR Installation: Partitioning Error

    - by Wesley
    Hi all, I have a Samsung N120 netbook (with upgraded 2GB RAM). I'm trying to install Ubuntu Netbook Remix, but when I set my partitions, I get an error. The setup I want right now is: Recovery Partition - 6 GB Windows XP Home Partition - 40 GB General Partition - remaining space UNR Partition - 40 GB I am told that I need to resize a partition and it will take a while. However, when it nearly starts, I get an ERROR!!! dialog that says, "Error informing the kernel about modifications to partition /dev/sda5 - Device or resource busy. This means Linux won't know about any changes you made to /dev/sda5 so you shouldn't mount it or use it in any way before rebooting." I'm not too sure what I should do right now... any ideas? Thanks in advance.

    Read the article

  • How to create add Oracle Weblogic's NodeManager as a service to xinetd?

    - by Neuquino
    I'm trying to add NodeManager to start automatically when system boots In Oracle® Fusion Middleware Node Manager Administrator's Guide there is this template: # default: off # description:nodemanager as a service service nodemgrsvc { type = UNLISTED disable = no socket_type = stream protocol = tcp wait = yes user = <username> port = 5556 flags = NOLIBWRAP log_on_success += DURATION HOST USERID server = <path-to-jave>/java env = CLASSPATH=<cp> LD_LIBRARY_PATH=<ldpath> server_args = -client -DNodeManagerHome=<NMHome> <java options> <nodemanager options> weblogic.NodeManager -v } I don't know how to fill: cp ldpath java_options nodemanager options Do you have any xinetd script example to start nodemanager? Thanks in advance.

    Read the article

  • Install windows xp from USB using the iso image

    - by buyrum
    I've got the windows xp ISO image on my computer and i want to install it on a computer without cdrom. The only way to do it is using usb flash drive. I don't know how to do it - i need to burn the iso to usb, make the usb bootable, install windows xp from the usb onto the hardrive (the usb should just replace the standard windows install disc). How to do it ?

    Read the article

  • Install windows xp from USB using the iso image

    - by buyrum
    I've got the windows xp ISO image on my computer and i want to install it on a computer without cdrom. The only way to do it is using usb flash drive. I don't know how to do it - i need to burn the iso to usb, make the usb bootable, install windows xp from the usb onto the hardrive (the usb should just replace the standard windows install disc). How to do it ?

    Read the article

  • I cannot format my PC

    - by Jesus Buelna
    I have a Toshiba Satellite(1) l505 6gb RAM, 6.00GB hard disk.Initially I have problem with another satellite(2) I had (mother board problem). I took my Laptop to a technician and cost a lot of money (almost as much as buying new one). So, since I have HDD problems with the first one(1) I decided to use the hard disk of the other one(2). I formatted the HDD and erased the partitions it had into 1 partition (or no partition). The problem is that when I try to format with the SO CD, in the screen, where I have to decide in which partition I want to install the SO, the only one option I have says "unallocated partition and I receive this message "Windows cannot install the SO in this partition, run files do not existed or maybe corrupted" When I erased the disk with Parted Magic, Did I erased any files needed for running the installing disk? I don't know. Is it possible to fixed or reinstate the disk to install the OS? By the way, I checked the disk physical health with Parted Magic, and it is OK. One more thing when I erased the disc to 0, I used the safety option offered by the Parted Magic.Need help please.

    Read the article

  • Blinking cursor after repair install on Win XP

    - by Nathan
    I have an Asus Eee PC netbook which I upgraded the drive of. After some shenanigans, I was able to do a repair install from my Windows XP CD. However, I still have a blinking cursor in the upper-left-hand corner after POST. I tried going into the recovery console and doing chkdsk/fixboot/fixmbr with no effect. Any suggestions would be appreciated! (Sorry if it's inappropriate to post a followup as a new question; I'm not sure how I should do it in a way that will cause it to actually be seen). Thanks, Nathan

    Read the article

  • Need suggetion on installing windows server on windows 7 laptop

    - by Kumar
    I recently bought one laptop with windows 7 for software development. unfortunately windows 7 home basic comes with limited version of IIS which is not sufficient for development. I would like to have windows server 2008 R2 for server development. i don't want to format windows 7 and install windows sever as i got win 7 with laptop. Could any one please suggest me the best possible option of having windows server 2008 on my laptop without formatting windows 7. Any solution should not void warranty of my laptop. Regards, Kumar.

    Read the article

  • Using Windows 8 with Bootcamp?

    - by Farhad Yusufali
    I am trying to install Windows 8 using Bootcamp on OSX Mountain Lion. I need a bootable CD. Does the bootable CD have to be the size of the ISO image or can it be smaller (since it only contains the installer)? If it does not in fact have to be the size of the ISO image, what's the minimum required size of the CD I insert into my drive to create a bootable CD? (i.e. the minimum size of a bootable USB is 8GB)

    Read the article

  • Project management, timesheet and planning software

    - by hfidgen
    Hiya, I'm trying to find an integrated PM solution which will give my business all of the following: Timesheeting so we can track time spent on tasks Holiday planner (integrated with timesheet and project management Project management tool, integrating the above, with milestones, gantt chart, dependancies etc. Forecasting ability (nice to have, but not a requirement) Reporting capability - especially time spent on projects, costs etc. Now yeah, that's quite a lot of functionality, I appreciate that! But currently we've got 3 systems, none of which really talk to each other and it's a right headache. So far we've looked at: OpenWorkbench - not enough features Basecamp - not enough features and too reliant on online MS Project - too expensive? Can anyone throw some other hats into the ring which maybe I've not heard about? Really interested to hear how other people have approached this, it's not an unusual business requirement! Thanks!

    Read the article

  • How to reset MacOsX while keeping BootCamp?

    - by ss814
    I have MacOsX 10.8.2 installed on my MacBook Pro and Windows 8 licenced on a BootCamp partition. I have messed up my MacOsx partition (problems while programming, .h files not found, old applications removed that still appears) and I wanna start back from a clean OS. Is there a Way to reset my partition (or reinstall, obviously) keeping my BootCamp partition safe ? I know I could use my recovery partition but I do not know if it won't delete my Windows and it no longer appears in disk utility. As I found no answers in the Internet, does someone how how to do that ? Thanks in advance.

    Read the article

  • Custom initrd init script: how to create /dev/initctl

    - by Posco Grubb
    I have a virtual machine (VMM is Xen 3.3) equipped with two IDE HDD's (/dev/hda and /dev/hdb). The root file system is in /dev/hda1, where Scientific Linux 5.4 is installed. /dev/hdb contains an empty ext2 file system. I want to protect the root file system from writes by the VM by using aufs (AnotherUnionFS) to layer a writable file system on top of the root file system. The changes to / will be written to the file system located on /dev/hdb. (Furthermore, outside the VM, the file backing the /dev/hda will also be set to read-only permissions, so the VMM should also prevent the VM from modifying at that level.) (The purpose of this setup: be able to corrupt a virtual machine using software-implemented fault injection but preserve the file system image in order to quickly reboot the VM to a fault-free state.) How do I get an initrd init script to do the necessary mounts to create the union file system? I've tried 2 approaches: I've tried modifying the nash script that mkinitrd creates, but I don't know what setuproot and switchroot do and how to make them use my aufs as the new root. Apparently, nobody else here knows either. (EDIT: I take that back.) I've tried building a LiveCD (using linux-live-6.3.0) and then modifying the Bash /linuxrc script from the generated initrd, and I got the mounts correct, but the final /sbin/init complains about /dev/initctl. Specifically, my /linuxrc mounts the aufs at /union. The last few lines of /linuxrc effectively do the following: cd /union mkdir -p mnt/live pivot_root . mnt/live exec sbin/chroot . sbin/init </dev/console >/dev/console 2>&1 When init starts, it outputs something like init: /dev/initctl: No such file or directory. What is supposed to create this FIFO? I found no such filename in the original linuxrc and liblinuxlive scripts. I tried creating it via "mkfifo /dev/initctl", but then init complained about a timeout opening or writing to the FIFO. Would appreciate any help or pointers. Thanks.

    Read the article

  • How to enter into BusyBox when booting?

    - by ???
    I have occasionally installed cloud-init package in Ubuntu, which blocks me from booting. Neither recovery mode works. Because cloud-init installed some upstart job configuration. So I want to enter into busybox to remove /etc/init/cloud-init*.conf, but it seems like no way to do it. I can press Ctrl+Alt+SysRq which brings on a rough hack menu, but there is no busybox option. So is it possible? My CDROM is broken so I can't use Live CD too.

    Read the article

  • Where do I find a color profile for my MacBook Pro display?

    - by Jesse
    I installed Windows 7 on my MacBook Pro, overwriting OSX Lion. The screen has a blue tint due to lack of a calibrated color profile. I once used the "Color LCD" ICC profile from the OSX partition and it worked great, but I've since lost it since I decided to overwrite OSX completely. I tried the manual calibration in Windows 7 but I just can't seem to get it right like it was while using the color profile that was on the OSX partition. All Google tells me is where to find the ICC profile in OSX, and to copy it over. Do I have to reinstall OSX just for the color profile? Even if I do, where does the profile actually come from? Is it on the OSX disk, or is it somehow retrieved from the hardware itself? Is there a way to get it without reinstalling OSX? Thanks!

    Read the article

  • RTNETLINK answers: Invalid argument

    - by LinuxPenseur
    When my system boots up it shows the following message. Bringing up loopback interface: [ OK ] Bringing up interface eth0: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth1: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth2: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth3: RTNETLINK answers: Invalid argument [ OK ] Why is this happening. Normally it does not give the message RTNETLINK answers: Invalid argument I did ifconfig and the output is eth0 Link encap:Ethernet HWaddr 00:00:50:6D:56:B4 inet addr:120.0.10.137 Bcast:120.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b4/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:214 (214.0 b) Base address:0xa000 eth1 Link encap:Ethernet HWaddr 00:00:50:6D:56:B5 inet addr:121.0.10.137 Bcast:121.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b5/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:214 (214.0 b) Base address:0xc000 eth2 Link encap:Ethernet HWaddr 00:00:50:6D:56:B6 inet addr:128.0.10.137 Bcast:128.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1006 (1006.0 b) TX bytes:396 (396.0 b) Interrupt:16 eth3 Link encap:Ethernet HWaddr 00:00:50:6D:56:B7 inet addr:123.0.10.137 Bcast:123.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:728 (728.0 b) TX bytes:396 (396.0 b) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:980 (980.0 b) TX bytes:980 (980.0 b) What could be the reason for the message and how to change this to normal? Thanks

    Read the article

  • How do you handle reboots?

    - by Mart
    We have one VPS (Windows 2008 R2+IIS7.5), with an asp.net mvc 3 application. The main question is: how to handle issues when Windows needs to reboot? (after installing Windows Updates or anything else). The goal is to make the website 24/7, but first it's ok to show a message to the users. (we'll be back soon, something like app_offline.htm) Our application uses SQL and also writes/reads some files (uploaded photos, documents) which are not stored in SQL. What do you recommend? Load balancing with ARR? (with 1+2 servers, but what if the front-end server needs reboot?) Windows failover cluster? SQL failover cluster? What to do with uploaded files? I really don't know what would be the best (and simplest) solution.

    Read the article

  • Install windows XP alongside Windows 8

    - by user01
    I have a 64 bit (AMD)CPU but it has 32 bit Windows 8 installed. Could I somehow trickily install another Windows XP 64 bit alongside to that ? I want to do this because I almost never use the Windows 8 apps & majorly use this machine for java development. So I would like to run a lightweight OS implementation. Additionally, With 64 bit version of Windows XP, I would be able to take advantage of my 64 bit CPU. So, how do I do it? (I hope there's some way to do this:)

    Read the article

  • Getting "GRUB loading ... no such partition"?

    - by shameedp
    I am having a dual os, windows 7 and linux, the c drive have 20 GB, in which 5 GB is allocated for windows 7 (original) and 15 gb for linux since the spacing for windows is very low i used EaseUS partition manager and deleted my linux OS, and merged the unused space into my C drive, now it becomes 20GB, the things, after the reboot, I am getting GRUB loading. Welcome to GRUB! error: no such partition. entering rescue mode. . . Kindly help me guys the problem i am facing is i dont have a DVD drive to resolve it, using recovery mode. Waiting for your reply guys. in ls command i have (hd0) (hd0,msdos8) (hd0,msdos7) (hd0,msdos6) (hd0,msdos5) (hd0,msdos2) (hd0,msdos1)

    Read the article

  • How can I chainload a USB drive from GRUB2?

    - by magic.plane
    I'm using GNU GRUB version 1.99-12ubuntu5, booted over the network using PXE. I used grub-mknetdir to generate the GRUB image and directory tree, which I'm serving on a TFTP server using Tftpd32 in Windows. I've put the latest version of Clonezilla on my USB drive using Tuxboot. Right now, in GRUB's CLI, using ls lists only the (pxe) device, even if the USB drive is plugged in before the computer is on. Is there any way I can chainload Clonezilla on my USB from GRUB, which is booted over the network?

    Read the article

< Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >