Search Results

Search found 18940 results on 758 pages for 'existing installation'.

Page 174/758 | < Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >

• Installing a DHCP Service On Win2k8 ( Windows Server 2008 )

  - by Akshay Deep Lamba

  Introduction Dynamic Host Configuration Protocol (DHCP) is a core infrastructure service on any network that provides IP addressing and DNS server information to PC clients and any other device. DHCP is used so that you do not have to statically assign IP addresses to every device on your network and manage the issues that static IP addressing can create. More and more, DHCP is being expanded to fit into new network services like the Windows Health Service and Network Access Protection (NAP). However, before you can use it for more advanced services, you need to first install it and configure the basics. Let’s learn how to do that. Installing Windows Server 2008 DHCP Server Installing Windows Server 2008 DCHP Server is easy. DHCP Server is now a “role” of Windows Server 2008 – not a windows component as it was in the past. To do this, you will need a Windows Server 2008 system already installed and configured with a static IP address. You will need to know your network’s IP address range, the range of IP addresses you will want to hand out to your PC clients, your DNS server IP addresses, and your default gateway. Additionally, you will want to have a plan for all subnets involved, what scopes you will want to define, and what exclusions you will want to create. To start the DHCP installation process, you can click Add Roles from the Initial Configuration Tasks window or from Server Manager à Roles à Add Roles. Figure 1: Adding a new Role in Windows Server 2008 When the Add Roles Wizard comes up, you can click Next on that screen. Next, select that you want to add the DHCP Server Role, and click Next. Figure 2: Selecting the DHCP Server Role If you do not have a static IP address assigned on your server, you will get a warning that you should not install DHCP with a dynamic IP address. At this point, you will begin being prompted for IP network information, scope information, and DNS information. If you only want to install DHCP server with no configured scopes or settings, you can just click Next through these questions and proceed with the installation. On the other hand, you can optionally configure your DHCP Server during this part of the installation. In my case, I chose to take this opportunity to configure some basic IP settings and configure my first DHCP Scope. I was shown my network connection binding and asked to verify it, like this: Figure 3: Network connection binding What the wizard is asking is, “what interface do you want to provide DHCP services on?” I took the default and clicked Next. Next, I entered my Parent Domain, Primary DNS Server, and Alternate DNS Server (as you see below) and clicked Next. Figure 4: Entering domain and DNS information I opted NOT to use WINS on my network and I clicked Next. Then, I was promoted to configure a DHCP scope for the new DHCP Server. I have opted to configure an IP address range of 192.168.1.50-100 to cover the 25+ PC Clients on my local network. To do this, I clicked Add to add a new scope. As you see below, I named the Scope WBC-Local, configured the starting and ending IP addresses of 192.168.1.50-192.168.1.100, subnet mask of 255.255.255.0, default gateway of 192.168.1.1, type of subnet (wired), and activated the scope. Figure 5: Adding a new DHCP Scope Back in the Add Scope screen, I clicked Next to add the new scope (once the DHCP Server is installed). I chose to Disable DHCPv6 stateless mode for this server and clicked Next. Then, I confirmed my DHCP Installation Selections (on the screen below) and clicked Install. Figure 6: Confirm Installation Selections After only a few seconds, the DHCP Server was installed and I saw the window, below: Figure 7: Windows Server 2008 DHCP Server Installation succeeded I clicked Close to close the installer window, then moved on to how to manage my new DHCP Server. How to Manage your new Windows Server 2008 DHCP Server Like the installation, managing Windows Server 2008 DHCP Server is also easy. Back in my Windows Server 2008 Server Manager, under Roles, I clicked on the new DHCP Server entry. Figure 8: DHCP Server management in Server Manager While I cannot manage the DHCP Server scopes and clients from here, what I can do is to manage what events, services, and resources are related to the DHCP Server installation. Thus, this is a good place to go to check the status of the DHCP Server and what events have happened around it. However, to really configure the DHCP Server and see what clients have obtained IP addresses, I need to go to the DHCP Server MMC. To do this, I went to Start à Administrative Tools à DHCP Server, like this: Figure 9: Starting the DHCP Server MMC When expanded out, the MMC offers a lot of features. Here is what it looks like: Figure 10: The Windows Server 2008 DHCP Server MMC The DHCP Server MMC offers IPv4 & IPv6 DHCP Server info including all scopes, pools, leases, reservations, scope options, and server options. If I go into the address pool and the scope options, I can see that the configuration we made when we installed the DHCP Server did, indeed, work. The scope IP address range is there, and so are the DNS Server & default gateway. Figure 11: DHCP Server Address Pool Figure 12: DHCP Server Scope Options So how do we know that this really works if we do not test it? The answer is that we do not. Now, let’s test to make sure it works. How do we test our Windows Server 2008 DHCP Server? To test this, I have a Windows Vista PC Client on the same network segment as the Windows Server 2008 DHCP server. To be safe, I have no other devices on this network segment. I did an IPCONFIG /RELEASE then an IPCONFIG /RENEW and verified that I received an IP address from the new DHCP server, as you can see below: Figure 13: Vista client received IP address from new DHCP Server Also, I went to my Windows 2008 Server and verified that the new Vista client was listed as a client on the DHCP server. This did indeed check out, as you can see below: Figure 14: Win 2008 DHCP Server has the Vista client listed under Address Leases With that, I knew that I had a working configuration and we are done!

  Read the article

• Use Drive Mirroring for Instant Backup in Windows 7

  - by Trevor Bekolay

  Even with the best backup solution, a hard drive crash means you’ll lose a few hours of work. By enabling drive mirroring in Windows 7, you’ll always have an up-to-date copy of your data. Windows 7’s mirroring – which is only available in Professional, Enterprise, and Ultimate editions – is a software implementation of RAID 1, which means that two or more disks are holding the exact same data. The files are constantly kept in sync, so that if one of the disks fails, you won’t lose any data. Note that mirroring is not technically a backup solution, because if you accidentally delete a file, it’s gone from both hard disks (though you may be able to recover the file). As an additional caveat, having mirrored disks requires changing them to “dynamic disks,” which can only be read within modern versions of Windows (you may have problems working with a dynamic disk in other operating systems or in older versions of Windows). See this Wikipedia page for more information. You will need at least one empty disk to set up disk mirroring. We’ll show you how to mirror an existing disk (of equal or lesser size) without losing any data on the mirrored drive, and how to set up two empty disks as mirrored copies from the get-go. Mirroring an Existing Drive Click on the start button and type partitions in the search box. Click on the Create and format hard disk partitions entry that shows up. Alternatively, if you’ve disabled the search box, press Win+R to open the Run window and type in: diskmgmt.msc The Disk Management window will appear. We’ve got a small disk, labeled OldData, that we want to mirror in a second disk of the same size. Note: The disk that you will use to mirror the existing disk must be unallocated. If it is not, then right-click on it and select Delete Volume… to mark it as unallocated. This will destroy any data on that drive. Right-click on the existing disk that you want to mirror. Select Add Mirror…. Select the disk that you want to use to mirror the existing disk’s data and press Add Mirror. You will be warned that this process will change the existing disk from basic to dynamic. Note that this process will not delete any data on the disk! The new disk will be marked as a mirror, and it will starting copying data from the existing drive to the new one. Eventually the drives will be synced up (it can take a while), and any data added to the E: drive will exist on both physical hard drives. Setting Up Two New Drives as Mirrored If you have two new equal-sized drives, you can format them to be mirrored copies of each other from the get-go. Open the Disk Management window as described above. Make sure that the drives are unallocated. If they’re not, and you don’t need the data on either of them, right-click and select Delete volume…. Right-click on one of the unallocated drives and select New Mirrored Volume…. A wizard will pop up. Click Next. Click on the drives you want to hold the mirrored data and click Add. Note that you can add any number of drives. Click Next. Assign it a drive letter that makes sense, and then click Next. You’re limited to using the NTFS file system for mirrored drives, so enter a volume label, enable compression if you want, and then click Next. Click Finish to start formatting the drives. You will be warned that the new drives will be converted to dynamic disks. And that’s it! You now have two mirrored drives. Any files added to E: will reside on both physical disks, in case something happens to one of them. Conclusion While the switch from basic to dynamic disks can be a problem for people who dual-boot into another operating system, setting up drive mirroring is an easy way to make sure that your data can be recovered in case of a hard drive crash. Of course, even with drive mirroring, we advocate regular backups to external drives or online backup services. Similar Articles Productive Geek Tips Rebit Backup Software [Review]Disabling Instant Search in Outlook 2007Restore Files from Backups on Windows Home ServerSecond Copy 7 [Review]Backup Windows Home Server Folders to an External Hard Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010

  Read the article

• Memory Efficient Windows SOA Server

  - by Antony Reynolds

  Installing a Memory Efficient SOA Suite 11.1.1.6 on Windows Server Well 11.1.1.6 is now available for download so I thought I would build a Windows Server environment to run it.  I will minimize the memory footprint of the installation by putting all functionality into the Admin Server of the SOA Suite domain. Required Software 64-bit JDK SOA Suite If you want 64-bit then choose “Generic” rather than “Microsoft Windows 32bit JVM” or “Linux 32bit JVM” This has links to all the required software. If you choose “Generic” then the Repository Creation Utility link does not show, you still need this so change the platform to “Microsoft Windows 32bit JVM” or “Linux 32bit JVM” to get the software. Similarly if you need a database then you need to change the platform to get the link to XE for Windows or Linux. If possible I recommend installing a 64-bit JDK as this allows you to assign more memory to individual JVMs. Windows XE will work, but it is better if you can use a full Oracle database because of the limitations on XE that sometimes cause it to run out of space with large or multiple SOA deployments. Installation Steps The following flow chart outlines the steps required in installing and configuring SOA Suite. The steps in the diagram are explained below. 64-bit? Is a 64-bit installation required?  The Windows & Linux installers will install 32-bit versions of the Sun JDK and JRockit.  A separate JDK must be installed for 64-bit. Install 64-bit JDK The 64-bit JDK can be either Hotspot or JRockit.  You can choose either JDK 1.7 or 1.6. Install WebLogic If you are using 64-bit then install WebLogic using “java –jar wls1036_generic.jar”.  Make sure you include Coherence in the installation, the easiest way to do this is to accept the “Typical” installation. SOA Suite Required? If you are not installing SOA Suite then you can jump straight ahead and create a WebLogic domain. Install SOA Suite Run the SOA Suite installer and point it at the existing Middleware Home created for WebLogic.  Note to run the SOA installer on Windows the user must have admin privileges.  I also found that on Windows Server 2008R2 I had to start the installer from a command prompt with administrative privileges, granting it privileges when it ran caused it to ignore the jreLoc parameter. Database Available? Do you have access to a database into which you can install the SOA schema.  SOA Suite requires access to an Oracle database (it is supported on other databases but I would always use an oracle database). Install Database I use an 11gR2 Oracle database to avoid XE limitations.  Make sure that you set the database character set to be unicode (AL32UTF8).  I also disabled the new security settings because they get in the way for a developer database.  Don’t forget to check that number of processes is at least 150 and number of sessions is not set, or is set to at least 200 (in the DB init parameters). Run RCU The SOA Suite database schemas are created by running the Repository Creation Utility.  Install the “SOA and BPM Infrastructure” component to support SOA Suite.  If you keep the schema prefix as “DEV” then the config wizard is easier to complete. Run Config Wizard The Config wizard creates the domain which hosts the WebLogic server instances.  To get a minimum footprint SOA installation choose the “Oracle Enterprise Manager” and “Oracle SOA Suite for developers” products.  All other required products will be automatically selected. The “for developers” installs target the appropriate components at the AdminServer rather than creating a separate managed server to house them.  This reduces the number of JVMs required to run the system and hence the amount of memory required.  This is not suitable for anything other than a developer environment as it mixes the admin and runtime functions together in a single server.  It also takes a long time to load all the required modules, making start up a slow process. If it exists I would recommend running the config wizard found in the “oracle_common/common/bin” directory under the middleware home.  This should have access to all the templates, including SOA. If you also want to run BAM in the same JVM as everything else then you need to “Select Optional Configuration” for “Managed Servers, Clusters and Machines”. To target BAM at the AdminServer delete the “bam_server1” managed server that is created by default.  This will result in BAM being targeted at the AdminServer. Installation Issues I had a few problems when I came to test everything in my mega-JVM. Following applications were not targeted and so I needed to target them at the AdminServer: b2bui composer Healthcare UI FMW Welcome Page Application (11.1.0.0.0) How Memory Efficient is It? On a Windows 2008R2 Server running under VirtualBox I was able to bring up both the 11gR2 database and SOA/BPM/BAM in 3G memory.  I allocated a minimum 512M to the PermGen and a minimum of 1.5G for the heap.  The setting from setSOADomainEnv are shown below: set DEFAULT_MEM_ARGS=-Xms1536m -Xmx2048m set PORT_MEM_ARGS=-Xms1536m -Xmx2048m set DEFAULT_MEM_ARGS=%DEFAULT_MEM_ARGS% -XX:PermSize=512m -XX:MaxPermSize=768m set PORT_MEM_ARGS=%PORT_MEM_ARGS% -XX:PermSize=512m -XX:MaxPermSize=768m I arrived at these numbers by monitoring JVM memory usage in JConsole. Task Manager showed total system memory usage at 2.9G – just below the 3G I allocated to the VM. Performance is not stellar but it runs and I could run JDeveloper alongside it on my 8G laptop, so in that sense it was a result!

  Read the article

• JQuery: Get length of JSON reply?

  - by Rosarch

  In a JQuery getJSON call, how can I tell the length of the JSON that's returned? function refreshRoomList() { $.getJSON('API/list_rooms', function (rooms) { if (rooms.length > 0) { $("#existing-room-list").empty(); $("#join-existing-room").text("Join existing room:"); // this shouldn't be here $.each(rooms, function (index, roomName) { var newChild = sprintf('<li><a href="room?key=%s">%s</a></li>', index, roomName); $("#existing-room-list").append(newChild); }); } else { $("#join-existing-room").text("No rooms found."); } }); } For some reason this doesn't work, but if I replace rooms.length > 0 with true, the full list of rooms is printed out.

  Read the article

• Implementing Google Search Appliance results into website

  - by Adam Jenkin

  I’m interested to hear peoples preferred methods or approaches to implementing the search results from a Google Search Appliance into an existing website. More specifically how do people prefer to implement/embed the search results into their existing site and persist the surrounding website elements (menus, membership etc) around the search results. As far as I am aware there are 3 different approaches. Sub-domain, handle everything in the xslt – create a search.mysite.com which is completely handled by google xslt and embed surround site components in xslt. Embed search results into existing site using an iframe – Use the existing website and just use an iframe to import results into page. Embed results into existing site by using server side processing – This is how I have previously integrated search into a site using a combination of bespoke dev and the GSALib project. I would be interested to hear if anyone has other suggestions, and were people have benefited or regretted using the above approaches.

  Read the article

• How to install Multiple ActiveX Controls per one step?

  - by Eugene

  My .ocx contains two ActiveX controls and I use both of them on one page. When user comes to page he gets two install confirmations for the same binary. After the first installation and page reload he gets one control displayed and “the website wants to run the following add-on...” yellow bar with control’s run confirmation for the other. I have only two possible solutions: Adding my CLSID’s to IE’s pre-approved control list, but I guess I cannot do it in the case of Non-Admin installation. Besides I consider this way as unreliable. Use the third control-container for hosting all other controls. It seems to my too complicated. Actually I’m not sure it can be done. Controls are used from the WEB, so I cannot use any administrative tools for installation. Is it possible to do all installation actions with one step without twice installation or run confirmation? Are there any “Best practices” for my case?

  Read the article

• I want to run the examples of QtOpenCl, i.e. Qt in OpenCl. Installation and setup help?

  - by Skkard

  The thing is I have to run the OpenCl examples, as given here:http://labs.trolltech.com/blogs/2010/04/07/using-opencl-with-qt/. The problem is that I have no clue where to start. I downloaded the source for QtOpenCl but it needs a valid OpenCl installation. I have Qt installed already. How do I install OpenCl? I don't have a GPU at home unfortunately, and need to implement it on my CPU for now. I have to later give a presentation where I will be supplied a system with a GPU. How do I go about installing OpenCl? Thanks you.

  Read the article

• BizTalk Server 2013 beta on Windows 8 (with Visual Studio 2012, SQL Server 2012 &amp; ESB Toolkit 2.2)

  - by Vishal

  Hello BizTalkers, Finally, Microsoft released the beta version of BizTalk Server 2010 R2 and now its called BizTalk Server 2013. I had tried the BTS 2010 R2 CTP version on Windows Azure VM and particularly I was excited about the RESTful services support and ESB fully integrated into BizTalk. Well didn’t get chance to test it much, Azure & VM running cost associated . Anyways, I was waiting for this announcement and I was so much glad that Microsoft finally released the on premise one.  Check what’s new in the BizTalk Server 2013.  Officially Microsoft says that BizTalk Server 2013 “beta” is not supported on Windows 8 but I was curious to try it out. Below is my installation and configuration experience. Virtual Machine configuration: VM Ware Workstation 9.0. Windows 8 Enterprise x64. SQL Server 2012. Visual Studio 2012 Ultimate. BizTalk Server 2013 beta. Windows 8 Machine name: WIN8 Local Administrator account name: Admin First I installed Windows 8 Enterprise on a VM Ware Workstation 9.0 and updated the OS. Even Windows 8 is the new release so luckily didn’t had much updates to perform. Next Installed Visual Studio 2012 Ultimate which was straightforward installation. Next Installed SQL Server 2012. Select New SQL Server stand-alone installation & followed the steps as shown in the screenshot below.   Once the installation is finished, fire up SQL Server Management Studio and try connecting. Initially when the management studio opened up, I thought why did Visual Studio 2010 open when I tried opening SQL Management studio but well, they made the interface alike VS 2010. Cool, I like it. Next is the real deal, download the BizTalk Server 2013 and unzip to particular folder. Double click the Setup.exe and follow the steps in the screenshots. Install Microsoft BizTalk Server 2013 beta. I selected all the normal artifacts and also all the artifacts under Additional Software's. So far so good. Next Launch BizTalk Server Configuration and I used Basic configuration as shown in screenshot below. Didn’t expect to see this but “wala”. Successful in the first shot. Still I wasn’t sure & something would have gone wrong so fired up the BizTalk Server Administration Console and that too came up just fine. Still was not able to believe so created a simple messaging application:  message in –> message out and that too worked just fine. Finally I was convinced that BizTalk Server 2013 did work on Windows 8. Next step was to install the ESB Toolkit 2.2 which is now integrated with BizTalk Server and does not come as a separate standalone installation file. Again run the BizTalk Setup.exe from the unzipped folder. Install Microsoft ESB Toolkit. Next, unlike ESB Configuration would  not open up by itself so go to “Windows 8 so called Start” (I could not resist to write this) and open the ESB Toolkit Configuration wizard. Below screenshot display the configurations I used. Also you can find them on MSDN here. Finally after the ESB Configuration, I open Admin Console and checked the 2 ESB application deployed. Cool. This concludes my experience about installation and configuration of BizTalk Server 2013 Beta & ESB Toolkit 2.2 on Windows 8. I will try and keep writing about BizTalk Server 2013 and its use with RESTful Services etc. Thanks, Vishal Mody

  Read the article

• Retrofit Certification

  - by Bill Evjen

  Impact of Regulations on Cabin Systems Installation John Courtright, Structural Integrity Engineering There are “heightened” FAA attention to technical issues related to IFE and Wi-Fi Systems Installations The Aging Aircraft Safety Rule – EWIS & Damage Tolerance Analysis The Challenge: Maximize Flight Safety While Minimizing Costs Issue Papers & Testing, Testing, Testing The role of Airworthiness Directives (ADs) on the design of many IFE systems and all antenna systems. Goal is safety AND cost-effective maintenance intervals and inspection techniques The STC Process Briefly Stated Type Certifications (TC) Supplemental Type Certifications (STC) The STC Process Project Specific Certification Plan (PSCP) Managed by FAA Aircraft Certification Office (ACO) Type of Project (Electrical/Mechanical Systems or Structural) Specific Type of Aircraft Being Modified Schedule Design & Installation Location What does the STC Plan (PSCP) Cover? System Description – What does the system do? System qualification – Are the components qualified? Certification requirements – What FARs are applicable? Installation detail – what is being modified? Prototype installation – What is new? Functional hazard Assessment (FHA) – is it safe? EZAP-EWIS Requirements – Any aging aircraft issues? Certification Data – How is compliance achieved? Delegation and FAA involvement – Who is doing the work? Proposed certification schedule – When is the installation? Certification documentation – What the FAA Expects to see Cabin Systems Certification Concerns In addition to meeting the requirements for DO-160, Cabin System Certification needs to address issues related to: Power management: Generally, IFE and Wi-Fi Systems are classified as “Non-Essential Equipment” from a certification viewpoint. Connected to “non-essential” power buses Must be able to shed IFE & Wi-Fi Systems in a smoke/fire event or Other electrical emergency (FAA Policy 00-111-160) FAA is more relaxed with testing wi-fi. It used to be that you had to have 150 seats with laptops running wi-fi, but now it is down to around 50. Aging aircraft concerns – electrical and structural Issue papers addressing technical concerns involving: “Structural Certification Criteria for Large Antenna Installations” Antenna “Vibration/Buffeting Compliance Criteria” DO-160 : Environmental Test Procedures DO 160 – “Environmental Conditions and Test Procedures for Airborne Equipment”, Issued by RTCA Provides guidance to equipment manufacturers as to testing requirements Temperature: –40C to +55C Vibration and Shock Contaminant susceptibility – fluids and dust Electro-magnetic Interference Cabin systems are generally classified as “non-essential” Swissair 111 crashed (in part) due to non-standard wiring practices. EWIS Design Implications Installation design must take EWIS Requirements into account. This generally means: Aircraft surveys are needed to identify proper wire routing Ensure existing wiring diagrams are correct Identify primary/Secondary/Tertiary bus locations Verify proper separation of wire bundles exist Required separation from fuel quantity indicator system (FQIS) to prevent fuel tang ignition Enhanced Zonal Analysis Procedure (EZAP) Performed EZAP was developed by the Aging Transport Systems Rulemaking Advisory Committee (ATSRAC) EZAP is the method for analyzing airplane zones with an emphasis on evaluating wiring systems and the existence of combustibles  in the cabin. Certification Considerations for Wi-Fi Systems Electrical – All existing DO 160 testing required Issue papers required Onboard EMI testing – any interference with aircraft systems when multiple wi-fi users are logged on? Vibration/Buffeting compliance criteria – what is the effect of the antenna on aircraft flight characteristics? Structural certification criteria – what are the stress loads on the aircraft at the antenna location and what is the impact on maintenance inspection criteria for the airline? Damage tolerance analysis required Goal – minimize maintenance inspection intervals

  Read the article

• ODEE Green Field (Windows) Part 3 - SOA Suite

  - by AndyL-Oracle

   So you're still here, are you? I'm sure you're probably overjoyed at the prospect of continuing with our green field installation of ODEE. In my previous post, I covered the installation of WebLogic - you probably noticed, like I did, that it's a pretty quick install. I'm pretty certain this had everything to do with how quickly the next post made it to the internet! So let's dig in. Make sure you've followed the steps from the initial post to obtain the necessary software and prerequisites! Unpack the RCU (Repository Creation Utility). This ZIP file contains a directory (rcuHome) that should be extracted into your ORACLE_HOME. Run the RCU – execute rcuHome/bin/rcu.bat. Click Next. Select Create and click Next. Enter the database connection details and click Next – any failure to connection will show in the Messages box. Click Ok Expand and select the SOA Infrastructure item. This will automatically select additional required components. You can change the prefix used, but DEV is recommended. If you are creating a sandbox that includes additional components like WebCenter Content and UMS, you may select those schemas as well but they are not required for a basic ODEE installation. Click Next. Click OK. Specify the password for the schema(s). Then click Next. Click Next. Click OK. Click OK. Click Create. Click Close. Unpack the SOA Suite installation files into a single directory e.g. SOA. Run the installer – navigate and execute SOA/Disk1/setup.exe. If you receive a JDK error, switch to a command line to start the installer. To start the installer via command line, do Start?Run?cmd and cd into the SOA\Disk1 directory. Run setup.exe –jreLoc < pathtoJRE >. Ensure you do not use a path with spaces – use the ~1 notation as necessary (your directory must not exceed 8 characters so “Program Files” becomes “Progra~1” and “Program Files (x86)” becomes “Progra~2” in this notation). Click Next. Select Skip and click Next. Resolve any issues shown and click Next. Verify your oracle home locations. Defaults are recommended. Click Next. Select your application server. If you’ve already installed WebLogic, this should be automatically selected for you. Click Next. Click Install. Allow the installation to progress… Click Next. Click Finish. You can save the installation details if you want. That should keep you satisfied for the moment. Get ready, because the next posts are going to be meaty! 

  Read the article

• T-SQL (SCD) Slowly Changing Dimension Type 2 using a merge statement

  - by AtulThakor

  Working on stored procedure recently which loads records into a data warehouse I found that the existing record was being expired using an update statement followed by an insert to add the new active record. Playing around with the merge statement you can actually expire the current record and insert a new record within one clean statement. This is how the statement works, we do the normal merge statement to insert a record when there is no match, if we match the record we update the existing record by expiring it and deactivating. At the end of the merge statement we use the output statement to output the staging values for the update,  we wrap the whole merge statement within an insert statement and add new rows for the records which we inserted. I’ve added the full script at the bottom so you can paste it and play around.   1: INSERT INTO ExampleFactUpdate 2: (PolicyID, 3: Status) 4: SELECT -- these columns are returned from the output statement 5: PolicyID, 6: Status 7: FROM 8: ( 9: -- merge statement on unique id in this case Policy_ID 10: MERGE dbo.ExampleFactUpdate dp 11: USING dbo.ExampleStag s 12: ON dp.PolicyID = s.PolicyID 13: WHEN NOT MATCHED THEN -- when we cant match the record we insert a new record record and this is all that happens 14: INSERT (PolicyID,Status) 15: VALUES (s.PolicyID, s.Status) 16: WHEN MATCHED --if it already exists 17: AND ExpiryDate IS NULL -- and the Expiry Date is null 18: THEN 19: UPDATE 20: SET 21: dp.ExpiryDate = getdate(), --we set the expiry on the existing record 22: dp.Active = 0 -- and deactivate the existing record 23: OUTPUT $Action MergeAction, s.PolicyID, s.Status -- the output statement returns a merge action which can 24: ) MergeOutput -- be insert/update/delete, on our example where a record has been updated (or expired in our case 25: WHERE -- we'll filter using a where clause 26: MergeAction = 'Update'; -- here   Complete source for example 1: if OBJECT_ID('ExampleFactUpdate') > 0 2: drop table ExampleFactUpdate 3:  4: Create Table ExampleFactUpdate( 5: ID int identity(1,1), 3: go 6: PolicyID varchar(100), 7: Status varchar(100), 8: EffectiveDate datetime default getdate(), 9: ExpiryDate datetime, 10: Active bit default 1 11: ) 12:  13:  14: insert into ExampleFactUpdate( 15: PolicyID, 16: Status) 17: select 18: 1, 19: 'Live' 20:  21: /*Create Staging Table*/ 22: if OBJECT_ID('ExampleStag') > 0 23: drop table ExampleStag 24: go 25:  26: /*Create example fact table */ 27: Create Table ExampleStag( 28: PolicyID varchar(100), 29: Status varchar(100)) 30:  31: --add some data 32: insert into ExampleStag( 33: PolicyID, 34: Status) 35: select 36: 1, 37: 'Lapsed' 38: union all 39: select 40: 2, 41: 'Quote' 42:  43: select * 44: from ExampleFactUpdate 45:  46: select * 47: from ExampleStag 48:  49:  50: INSERT INTO ExampleFactUpdate 51: (PolicyID, 52: Status) 53: SELECT -- these columns are returned from the output statement 54: PolicyID, 55: Status 56: FROM 57: ( 58: -- merge statement on unique id in this case Policy_ID 59: MERGE dbo.ExampleFactUpdate dp 60: USING dbo.ExampleStag s 61: ON dp.PolicyID = s.PolicyID 62: WHEN NOT MATCHED THEN -- when we cant match the record we insert a new record record and this is all that happens 63: INSERT (PolicyID,Status) 64: VALUES (s.PolicyID, s.Status) 65: WHEN MATCHED --if it already exists 66: AND ExpiryDate IS NULL -- and the Expiry Date is null 67: THEN 68: UPDATE 69: SET 70: dp.ExpiryDate = getdate(), --we set the expiry on the existing record 71: dp.Active = 0 -- and deactivate the existing record 72: OUTPUT $Action MergeAction, s.PolicyID, s.Status -- the output statement returns a merge action which can 73: ) MergeOutput -- be insert/update/delete, on our example where a record has been updated (or expired in our case 74: WHERE -- we'll filter using a where clause 75: MergeAction = 'Update'; -- here 76:  77:  78: select * 79: from ExampleFactUpdate 80: 

  Read the article

• MVC view engine that can render classic ASP?

  - by David Lively

  I'm about to start integrating ASP.NET MVC into an existing 200k+ line classic ASP application. Rewriting the existing code (which runs an entire business, not just the public-facing website) is not an option. The existing ASP 3.0 pages are quite nicely structured (given what was available when this model was put into place nearly 15 years ago), like so: <!--#include virtual="/_lib/user.asp"--> <!--#include virtual="/_lib/db.asp"--> <!--#include virtual="/_lib/stats.asp"--> <!-- #include virtual="/_template/topbar.asp"--> <!-- #include virtual="/_template/lftbar.asp"--> <h1>page name</h1> <p>some content goes here</p> <p>some content goes here</p> <p>.....</p> <h2>Today's Top Forum Posts</h2> <%=forum_top_posts(1)%> <!--#include virtual="/_template/footer.asp"--> ... or somesuch. Some pages will include function and sub definitions, but for the most part these exist in include files. I'm wondering how difficult it would be to write an MVC view engine that could render classic ASP, preferably using the existing ASP.DLL. In that case, I could replace <!--#include virtual="/_lib/user.asp"--> with <%= Html.RenderPartial("lib/user"); %> as I gradually move existing pages from ASP to ASP.NET. Since the existing formatting and library includes are used very extensively, they must be maintained. I'd like to avoid having to maintain two separate versions. I know the ideal way to go about this would be to simply start a new app and say to hell with the ASP code, however, that simply ain't gonna happen. Ideas?

  Read the article

• Association and model data saving problem

  - by Zhlobopotam

  Developing with cakephp 1.3 (latest from github). There are 2 models bind with hasAndBelongsToMany: documents and tags. Document can have many tags in other words. I've add a new document submitting form there user can enter a list of tags separated with commas (new tag will be added, if not exist already). I looked at cakephp bakery 2.0 source code on github and found the solution. But it seems that something is wrong. class Document extends AppModel { public $hasAndBelongsToMany = array('Tag'); public function beforeSave($options = array()) { if (isset($this->data[$this->alias]['tags']) && !empty($this- >data[$this->alias]['tags'])) { $tagIds = $this->Tag->saveDocTags($this->data[$this->alias] ['tags']); unset($this->data[$this->alias]['tags']); $this->data[$this->Tag->alias][$this->Tag->alias] = $tagIds; } return true; } } class Tag extends AppModel { public $hasAndBelongsToMany = array ('Document'); public function saveDocTags($commalist = '') { if ($commalist == '') return null; $tags = explode(',',$commalist); if (empty($tags)) return null; $existing = $this->find('all', array( 'conditions' => array('title' => $tags) )); $return = Set::extract($existing,'/Tag/id'); if (sizeof($existing) == sizeof($tags)) { return $return; } $existing = Set::extract($existing,'/Tag/title'); foreach ($tags as $tag) { if (!in_array($tag, $existing)) { $this->create(array('title' => $tag)); $this->save(); $return[] = $this->id; } } return $return; } } So, new tags creation works well but document model can't save association data and tells: SQL Error: 1054: Unknown column 'Array' in 'field list' Query: INSERT INTO documents (title, content, shortnfo, date, status) VALUES ('Document with tags', '', '', Array, 1) Any ideas how to solve this problem?

  Read the article

• A question of long-running and disruptive branches

  - by Matt Enright

  We are about to begin prototyping a new application that will share some existing infrastructure assemblies with an existing application, and also involve a significant subset of the existing domain model. Parts of the domain model will likely undergo some serious changes for this new application, and the endgame for all of this, once the new application has been fully specified and is launch-ready is that we would like to re-unify the models of the two applications (as well as share a database, link functionality, etc.), but for the duration of development, prototyping, etc, we will be using a separate database so that we can change things without worrying about impact to development or use of the existing application. Since it is a prototype, there will be a pretty long window during which serious changes or rearchitecturing can occur as product management experiments with different workflows, different customer bases are surveyed, and we try and keep up. We have already made a Subversion branch, so as to not impact concurrent development on the mature application, and are toying with 2 potential ways of moving forward with this: Use the svn branch as the sole mechanism of separation. Make our changes to the existing domain models, and evaluate their impact on the existing application (and make requisite changes to ProjectA) when we have established that our long-running side branch is stable enough for re-entry to trunk. "Fork" the shared code (temporarily): Copy ProjectA.Entities to NewProject.Entities, and treat all of the NewProject code as self-contained. When all of the perturbations around the model have died down and we feel satisfied, manually re-integrate the changes (as granular or sweeping as warranted) back into ProjectA.Entities, updating ProjectA to use the improved models at each step (this can take place either before or after the subversion merge has occurred). The subversion merge will then not handle recombination of any of the heavy changes here. Note: the "fork" method only applies to the code we see significant changes in store for, and whose modification will break ProjectA - shared infrastructure stuff for example, we would just modify in place (on our branch) and let the merge sort out. Development is hard, go shopping. Naturally, after not coming to an agreement, we're turning it over to the oracle of power that is SO. Any experience with any of these methods, pain points to watch out for, something new entirely?

  Read the article

• What Every Developer Should Know About MSI Components

  - by Alois Kraus

  Hopefully nothing. But if you have to do more than simple XCopy deployment and you need to support updates, upgrades and perhaps side by side scenarios there is no way around MSI. You can create Msi files with a Visual Studio Setup project which is severely limited or you can use the Windows Installer Toolset. I cannot talk about WIX with my German colleagues because WIX has a very special meaning. It is funny to always use the long name when I talk about deployment possibilities. Alternatively you can buy commercial tools which help you to author Msi files but I am not sure how good they are. Given enough pain with existing solutions you can also learn the MSI Apis and create your own packaging solution. If I were you I would use either a commercial visual tool when you do easy deployments or use the free Windows Installer Toolset. Once you know the WIX schema you can create well formed wix xml files easily with any editor. Then you can “compile” from the wxs files your Msi package. Recently I had the “pleasure” to get my hands dirty with C++ (again) and the MSI technology. Installation is a complex topic but after several month of digging into arcane MSI issues I can safely say that there should exist an easier way to install and update files as today. I am not alone with this statement as John Robbins (creator of the cool tool Paraffin) states: “.. It's a brittle and scary API in Windows …”. To help other people struggling with installation issues I present you the advice I (and others) found useful and what will happen if you ignore this advice. What is a MSI file? A MSI file is basically a database with tables which reference each other to control how your un/installation should work. The basic idea is that you declare via these tables what you want to install and MSI controls the how to get your stuff onto or off your machine. Your “stuff” consists usually of files, registry keys, shortcuts and environment variables. Therefore the most important tables are File, Registry, Environment and Shortcut table which define what will be un/installed. The key to master MSI is that every resource (file, registry key ,…) is associated with a MSI component. The actual payload consists of compressed files in the CAB format which can either be embedded into the MSI file or reside beside the MSI file or in a subdirectory below it. To examine MSI files you need Orca a free MSI editor provided by MS. There is also another free editor called Super Orca which does support diffs between MSI and it does not lock the MSI files. But since Orca comes with a shell extension I tend to use only Orca because it is so easy to right click on a MSI file and open it with this tool. How Do I Install It? Double click it. This does work for fresh installations as well as major upgrades. Updates need to be installed via the command line via msiexec /i <msi> REINSTALL=ALL REINSTALLMODE=vomus   This tells the installer to reinstall all already installed features (new features will NOT be installed). The reinstallmode letters do force an overwrite of the old cached package in the %WINDIR%\Installer folder. All files, shortcuts and registry keys are redeployed if they are missing or need to be replaced with a newer version. When things did go really wrong and you want to overwrite everything unconditionally use REINSTALLMODE=vamus. How To Enable MSI Logs? You can download a MSI from Microsoft which installs some registry keys to enable full MSI logging. The log files can be found in your %TEMP% folder and are called MSIxxxx.log. Alternatively you can add to your msiexec command line the option msiexec …. /l*vx <LogFileName> Personally I find it rather strange that * does not mean full logging. To really get all logs I need to add v and x which is documented in the msiexec help but I still find this behavior unintuitive. What are MSI components? The whole MSI logic is bound to the concept of MSI components. Nearly every msi table has a Component column which binds an installable resource to a component. Below are the screenshots of the FeatureComponents and Component table of an example MSI. The Feature table defines basically the feature hierarchy.  To find out what belongs to a feature you need to look at the FeatureComponents table where for each feature the components are listed which will be installed when a feature is installed. The MSI components are defined in the  Component table. This table has as first column the component name and as second column the component id which is a GUID. All resources you want to install belong to a MSI component. Therefore nearly all MSI tables have a Component_ column which contains the component name. If you look e.g. a the File table you see that every file belongs to a component which is true for all other tables which install resources. The component table is the glue between all other tables which contain the resources you want to install. So far so easy. Why is MSI then so complex? Most MSI problems arise from the fact that you did violate a MSI component rule in one or the other way. When you install a feature the reference count for all components belonging to this feature will increase by one. If your component is installed by more than one feature it will get a higher refcount. When you uninstall a feature its refcount will drop by one. Interesting things happen if the component reference count reaches zero: Then all associated resources will be deleted. That looks like a reasonable thing and it is. What it makes complex are the strange component rules you have to follow. Below are some important component rules from the Tao of the Windows Installer … Rule 16: Follow Component Rules Components are a very important part of the Installer technology. They are the means whereby the Installer manages the resources that make up your application. The SDK provides the following guidelines for creating components in your package: Never create two components that install a resource under the same name and target location. If a resource must be duplicated in multiple components, change its name or target location in each component. This rule should be applied across applications, products, product versions, and companies. Two components must not have the same key path file. This is a consequence of the previous rule. The key path value points to a particular file or folder belonging to the component that the installer uses to detect the component. If two components had the same key path file, the installer would be unable to distinguish which component is installed. Two components however may share a key path folder. Do not create a version of a component that is incompatible with all previous versions of the component. This rule should be applied across applications, products, product versions, and companies. Do not create components containing resources that will need to be installed into more than one directory on the user’s system. The installer installs all of the resources in a component into the same directory. It is not possible to install some resources into subdirectories. Do not include more than one COM server per component. If a component contains a COM server, this must be the key path for the component. Do not specify more than one file per component as a target for the Start menu or a Desktop shortcut. … And these rules do not even talk about component ids, update packages and upgrades which you need to understand as well. Lets suppose you install two MSIs (MSI1 and MSI2) which have the same ComponentId but different component names. Both do install the same file. What will happen when you uninstall MSI2?   Hm the file should stay there. But the component names are different. Yes and yes. But MSI uses not use the component name as key for the refcount. Instead the ComponentId column of the Component table which contains a GUID is used as identifier under which the refcount is stored. The components Comp1 and Comp2 are identical from the MSI perspective. After the installation of both MSIs the Component with the Id {100000….} has a refcount of two. After uninstallation of one MSI there is still a refcount of one which drops to zero just as expected when we uninstall the last msi. Then the file which was the same for both MSIs is deleted. You should remember that MSI keeps a refcount across MSIs for components with the same component id. MSI does manage components not the resources you did install. The resources associated with a component are then and only then deleted when the refcount of the component reaches zero.   The dependencies between features, components and resources can be described as relations. m,k are numbers >= 1, n can be 0. Inside a MSI the following relations are valid Feature    1  –> n Components Component    1 –> m Features Component      1  –>  k Resources These relations express that one feature can install several components and features can share components between them. Every (meaningful) component will install at least one resource which means that its name (primary key to stay in database speak) does occur in some other table in the Component column as value which installs some resource. Lets make it clear with an example. We want to install with the feature MainFeature some files a registry key and a shortcut. We can then create components Comp1..3 which are referenced by the resources defined in the corresponding tables.   Feature Component Registry File Shortcuts MainFeature Comp1 RegistryKey1     MainFeature Comp2   File.txt   MainFeature Comp3   File2.txt Shortcut to File2.txt   It is illegal that the same resource is part of more than one component since this would break the refcount mechanism. Lets illustrate this:            Feature ComponentId Resource Reference Count Feature1 {1000-…} File1.txt 1 Feature2 {2000-….} File1.txt 1 The installation part works well but what happens when you uninstall Feature2? Component {20000…} gets a refcount of zero where MSI deletes all resources belonging to this component. In this case File1.txt will be deleted. But Feature1 still has another component {10000…} with a refcount of one which means that the file was deleted too early. You just have ruined your installation. To fix it you then need to click on the Repair button under Add/Remove Programs to let MSI reinstall any missing registry keys, files or shortcuts. The vigilant reader might has noticed that there is more in the Component table. Beside its name and GUID it has also an installation directory, attributes and a KeyPath. The KeyPath is a reference to a file or registry key which is used to detect if the component is already installed. This becomes important when you repair or uninstall a component. To find out if the component is already installed MSI checks if the registry key or file referenced by the KeyPath property does exist. When it does not exist it assumes that it was either already uninstalled (can lead to problems during uninstall) or that it is already installed and all is fine. Why is this detail so important? Lets put all files into one component. The KeyPath should be then one of the files of your component to check if it was installed or not. When your installation becomes corrupt because a file was deleted you cannot repair it with the Repair button under Add/Remove Programs because MSI checks the component integrity via the Resource referenced by its KeyPath. As long as you did not delete the KeyPath file MSI thinks all resources with your component are installed and never executes any repair action. You get even more trouble when you try to remove files during an upgrade (you cannot remove files during an update) from your super component which contains all files. The only way out and therefore best practice is to assign for every resource you want to install an extra component. This ensures painless updatability and repairs and you have much less effort to remove specific files during an upgrade. In effect you get this best practice relation Feature 1  –> n Components Component   1  –>  1 Resources MSI Component Rules Rule 1 – One component per resource Every resource you want to install (file, registry key, value, environment value, shortcut, directory, …) must get its own component which does never change between versions as long as the install location is the same. Penalty If you add more than one resources to a component you will break the repair capability of MSI because the KeyPath is used to check if the component needs repair. MSI ComponentId Files MSI 1.0 {1000} File1-5 MSI 2.0 {2000} File2-5 You want to remove File1 in version 2.0 of your MSI. Since you want to keep the other files you create a new component and add them there. MSI will delete all files if the component refcount of {1000} drops to zero. The files you want to keep are added to the new component {2000}. Ok that does work if your upgrade does uninstall the old MSI first. This will cause the refcount of all previously installed components to reach zero which means that all files present in version 1.0 are deleted. But there is a faster way to perform your upgrade by first installing your new MSI and then remove the old one.  If you choose this upgrade path then you will loose File1-5 after your upgrade and not only File1 as intended by your new component design.   Rule 2 – Only add, never remove resources from a component If you did follow rule 1 you will not need Rule 2. You can add in a patch more resources to one component. That is ok. But you can never remove anything from it. There are tricky ways around that but I do not want to encourage bad component design. Penalty Lets assume you have 2 MSI files which install under the same component one file   MSI1 MSI2 {1000} - ComponentId {1000} – ComponentId File1.txt File2.txt   When you install and uninstall both MSIs you will end up with an installation where either File1 or File2 will be left. Why? It seems that MSI does not store the resources associated with each component in its internal database. Instead Windows will simply query the MSI that is currently uninstalled for all resources belonging to this component. Since it will find only one file and not two it will only uninstall one file. That is the main reason why you never can remove resources from a component!   Rule 3 Never Remove A Component From an Update MSI. This is the same as if you change the GUID of a component by accident for your new update package. The resulting update package will not contain all components from the previously installed package. Penalty When you remove a component from a feature MSI will set the feature state during update to Advertised and log a warning message into its log file when you did enable MSI logging. SELMGR: ComponentId '{2DCEA1BA-3E27-E222-484C-D0D66AEA4F62}' is registered to feature 'xxxxxxx, but is not present in the Component table.  Removal of components from a feature is not supported! MSI (c) (24:44) [07:53:13:436]: SELMGR: Removal of a component from a feature is not supported Advertised means that MSI treats all components of this feature as not installed. As a consequence during uninstall nothing will be removed since it is not installed! This is not only bad because uninstall does no longer work but this feature will also not get the required patches. All other features which have followed component versioning rules for update packages will be updated but the one faulty feature will not. This results in very hard to find bugs why an update was only partially successful. Things got better with Windows Installer 4.5 but you cannot rely on that nobody will use an older installer. It is a good idea to add to your update msiexec call MSIENFORCEUPGRADECOMPONENTRULES=1 which will abort the installation if you did violate this rule.

  Read the article

• Seven Accounting Changes for 2010

  - by Theresa Hickman

  I read a very interesting article called Seven Accounting Changes That Will Affect Your 2010 Annual Report from SmartPros that nicely summarized how 2010 annual financial statements will be impacted.  Here’s a Reader’s Digest version of the changes: 1.  Changes to revenue recognition if you sell bundled products with multiple deliverables: Old Rule: You needed to objectively establish the “fair value” of each bundled item. So if you sold a dishwasher plus installation and could not establish the fair value of the installation, you might have to delay recognizing revenue of the dishwasher days or weeks later until it was installed. New Rule (ASU 2009-13): “Objective” proof of each service or good is no longer required; you can simply estimate the selling price of the installation and warranty. So the dishwasher vendor can recognize the dishwasher revenue immediately at the point of sale without waiting a few weeks for the installation. Then they can recognize the estimated value of the installation after it is complete. 2.  Changes to revenue recognition for devices with embedded software: Old Rule: Hardware devices with embedded software, such as the iPhone, had to follow stringent software revrec rules. This forced Apple to recognize iPhone revenues over two years, the period of time that software updates were provided. New Rule (ASU 2009-14): Software revrec rules no longer apply to these devices with embedded software; these devices can now follow ASU 2009-13. This allows vendors, such as Apple, to recognize revenue sooner. 3.  Fair value disclosures: Companies (both public and private) now need to spend extra time gathering, summarizing, and disclosing information about items measured at fair value, such as significant transfers in and out of Level 1(quoted market price), Level 2 (valuation based on observable markets), and Level 3 (valuations based on internal information). 4.  Consolidation of variable interest entities (a.k.a special purpose entities): Consolidation rules for variable interest entities now require a qualitative, not quantitative, analysis to determine the primary beneficiary. Instead of simply looking at the percentage of voting interests, the primary beneficiary could have less than the majority interests as long as it has the power to direct the activities and absorb any losses.  5.  XBRL: Starting in June 2011, all U.S. public companies are required to file financial statements to the SEC using XBRL. Note: Oracle supports XBRL reporting. 6.  Non-GAAP financial disclosures: Companies that report non-GAAP measures of performance, such as EBITDA in SEC filings, have more flexibility.  The new interpretations can be found here: http://www.sec.gov/divisions/corpfin/guidance/nongaapinterp.htm.  7.  Loss contingencies disclosures: Companies should expect additional scrutiny of their loss disclosures, such as those from litigation losses, in their annual financial statements. The SEC wants more disclosures about loss contingencies sooner instead of after the cases are settled.

  Read the article

• I need help installing Ubuntu 11.10 to multi-drive system

  - by CookyMonzta

  I have a machine with 3 hard drives; the primary, which is 750GB (drive 0), and 2 others, each of which is 640GB (drives 1 and 2). On the last screen before the actual installation begins, this is how my hard drive configuration looks: /dev/sda [DISK0, 750GB] /dev/sda1 ntfs 104MB [Win7 System Reserved] /dev/sda2 ntfs 499,997MB [Windows 7 Pro] free space 250,052MB [This space intended for Windows 8] /dev/sdb [DISK1, 640GB] /dev/sdb1 ntfs 400,085MB [Windows XP Pro] free space 240,049MB [This space intended for Ubuntu] /dev/sdc [DISK2, 640GB] [This drive intended for various backups] free space 160,033MB /dev/sdc5 ntfs 480,101MB [Acronis Secure Zone] As you can see, I have 3 drives, all SATA. I have Win7 on my first drive (0), WinXP on my second drive (1) and a secure zone for daily backups on my third drive (2). I want to put Ubuntu 11.10 Oneiric Ocelot on the drive that also has XP. I've already used 400GB for XP and I have 240GB remaining, for which, my intention was to create a 4GB swap file and use the rest for Ubuntu itself. This is what my second hard drive looked like, for my intended setup before installation: /dev/sdb /dev/sdb5 swap 4,095MB [Linux swap] /dev/sdb6 ext4 235,951MB [Ubuntu 11.10] Needless to say, this is only the second time I have attempted to install Linux. I managed to get 7.10 Gutsy Gibbon working on an old machine. I have two problems with this installation: Ubuntu asks for a location to install the boot loader (i.e., "Device for Boot Loader Installation"). I already have a boot loader; namely, Acronis OS Selector (from Acronis Disk Director 11). So I decided to put the Ubuntu boot loader in /dev/sdb6 (where I intend to install Ubuntu), to keep it from interfering with my Acronis OS Selector. Once I hit "Install now", I ended up with the following error: "No root file system is defined. Please correct this from the partitioning menu." What am I missing? Did I attempt to put the boot loader in the wrong place? I assume I did, because as I am writing this entry, I am looking at LinuxIdentity.com's Ubuntu 11.04 Natty Narwhal magazine, and I see a screenshot (Figure 7 on Page 13) that implies that the boot loader can be installed anywhere, including the first hard drive (in the MBR, which would obviously force me to reinstall the Acronis OS Selector) or even on a floppy. But why do I get an undefined root file system error? I thought /dev/sdb6 was the root file. Obviously I'm missing something in the installation procedure. Should I try installing it in Windows using the WUBI Installer? I assume that, if I attempt to install Ubuntu from WinXP (on the second drive), it will automatically install Ubuntu on the empty partition alongside XP. But will I have the option of creating a swap partition? And what if the WUBI Installer searches all of my drives and decides to install Ubuntu on my first drive's empty partition (which I have left empty for Win8 upon its release)?

  Read the article

• Dual booting windows 8/ubuntu 12.04.2, Grub doesn't appear and machine never boot in ubuntu

  - by black sensei

  i got a new ACER predator AG3620-UR308 which came with windows 8, so i wanted to run ubuntu 12.04.2 on it as a dual booting. To be honest, i've been doing dual booting for a while now so, i did the right thing. the box came with 2TB HDD. so i made 4 partitions with a raw partition just after the windows installation partition I always do manual installation so even if ubuntu didn't detect windows 8, it was ok for me. So i created swap area and finished the installation etc....Grub was install on the only drive there which is sda. After reboot, grub doesn't even come up.So it always boot in windows 8. I did repeat the installation process twice and yield same result. which is weird because this method always works for me so far.Even the laptop am using to write this post is a dual booting windows 7/ mint nadia installed the same way. Is there anything new in windows 8 that i didn't make provision for? Before starting the installation, all i read about was that , windows 8 should be installed first and ubuntu after. I went ahead and disable secure boot from the BIOS and enabled CSM (don't even know what it means) according to Acer custhelp site . I boot from USB and did fdisk -l bellow is the result: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x8c361cb5 Device Boot Start End Blocks Id System /dev/sda1 1 3907029167 1953514583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 8178 MB, 8178892800 bytes 255 heads, 63 sectors/track, 994 cylinders, total 15974400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006a87e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 15972351 7985152 b W95 FAT32 ubuntu@ubuntu:~$ Can anybody shed some light? thank you in advance EDIT Hey, i just did another trial with 13.04 this time and still no luck. bios: secure-boot: disabled enable CSM : always 1-delete previous ubuntu partition and swap area partition.now having free space 2- used usb installer to prepare usb with ubuntu-13.04-desktop-amd64.iso 3- rebooted : liveusb didnt detect windows 8, used something else 4-created partition ext4 for / 5-created partition for swap-area 6- default grub path is /dev/sda and clicked install Acer always boots into windows.

  Read the article

• Dual booting windows 8/ubuntu 12.04. Grub doesn't appear and machine never boot in ubuntu

  - by black sensei

  i got a new ACER predator AG3620-UR308 which came with windows 8, so i wanted to run ubuntu 12.04.2 on it as a dual booting. To be honest, i've been doing dual booting for a while now so, i did the right thing. the box came with 2TB HDD. so i made 4 partitions with a raw partition just after the windows installation partition I always do manual installation so even if ubuntu didn't detect windows 8, it was ok for me. So i created swap area and finished the installation etc....Grub was install on the only drive there which is sda. After reboot, grub doesn't even come up.So it always boot in windows 8. I did repeat the installation process twice and yield same result. which is weird because this method always works for me so far.Even the laptop am using to write this post is a dual booting windows 7/ mint nadia installed the same way. Is there anything new in windows 8 that i didn't make provision for? Before starting the installation, all i read about was that , windows 8 should be installed first and ubuntu after. I went ahead and disable secure boot from the BIOS and enabled CSM (don't even know what it means) according to Acer custhelp site . I boot from USB and did fdisk -l bellow is the result: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x8c361cb5 Device Boot Start End Blocks Id System /dev/sda1 1 3907029167 1953514583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 8178 MB, 8178892800 bytes 255 heads, 63 sectors/track, 994 cylinders, total 15974400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006a87e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 15972351 7985152 b W95 FAT32 ubuntu@ubuntu:~$ Can anybody shed some light? thank you in advance

  Read the article

• How do I add "Press any key to boot from usb" when installing Windows from a flash drive? (Grub4dos question / how to remove a bootloader)

  - by Vincent

  Hi there! I've been struggling with this problem for a while now and finially decided to ask for help. Let me first explain what the main purpose of the app is: to provide the a very easy to use way of backing up files, after which I format the drive and start Windows 7 setup. I do this by booting WinPE, which runs a script to detect Windows installations and then opens a file browser. After the file browser is closed, the script continues and formats the drive that contains the Windows installation, and starts an unattended Windows 7 install. Now here is the problem: When you start Windows setup or WinPE from a dvd, you get a nice option to "Press any key to boot from DVD". This is to prevent the computer from booting the DVD when the first phase of the installation is complete and the computer reboots. However, when booting from a flash drive, Windows does not provide this option: it simply boots the flash drive every reboot. To replicate the "press any key" function, I installed Grub4Dos, which works great. It provides a small menu, the first standard item being "Continue installation", the second being "start installation". After quite a lot of tweaking, I got everything working: Start installation starts WinPE, which in turn starts the Windows installation. At first reboot, the Grub4Dos menu comes up, counts 5 seconds and boots the second stage of the installation. Here, I am greeted with the error: "Windows setup could not configure windows to run on this computer's hardware." When I boot into WinPE the normal way (put the bootmgr on the stick root) and change my bios to boot from the primary hdd after first reboot, I don't get this error. I've been looking around, and the only thing I could find was that the BIOS automatically names the boot device hd0, and that Windows can only be run / installed to hd 0. I'm not sure if this is the problem. I read about remapping to solve this problem, but to do that you have to know the phisical location of the hard drive and partition, like hd(0,1). I want this flash drive to work on any PC, regardless of where the OS is installed, so that's not really a possibility. A possible fix I thought of is removing the bootloader from the flash drive when I'm in WinPE. That way, when the pc reboots the BIOS will not see the flash drive as a boot drive and instead boot the primary hdd. I have yet to find a way to do this. Thank you for reading my question, and if you have any suggestion, please do.

  Read the article

• Bulk update & occasional insert (coredata) - Too slow

  - by Andrew

  Update: Currently looking into NSSET's minusSet links: http://stackoverflow.com/questions/1475636/comparing-two-arrays Hi guys, Could benefit from your wisdom here.. I'm using Coredata in my app, on first launch I download a data file and insert over 500 objects (each with 60 attributes) - fast, no problem. Each subsequent launch I download an updated version of the file, from which I need to update all existing objects' attributes (except maybe 5 attributes) and create new ones for items which have been added to the downloaded file. So, first launch I get 500 objects.. say a week later my file now contains 507 items.. I create two arrays, one for existing and one for downloaded. NSArray *peopleArrayDownloaded = [CoreDataHelper getObjectsFromContext:@"person" :@"person_id" :YES :managedObjectContextPeopleTemp]; NSArray *peopleArrayExisting = [CoreDataHelper getObjectsFromContext:@"person" :@"person_id" :YES :managedObjectContextPeople]; If the count of each array is equal then I just do this: NSUInteger index = 0; if ([peopleArrayExisting count] == [peopleArrayDownloaded count]) { NSLog(@"Number of people downloaded is same as the number of people existing"); for (person *existingPerson in peopleArrayExisting) { person *tempPerson = [peopleArrayDownloaded objectAtIndex:index]; // NSLog(@"Updating id: %@ with id: %@",existingPerson.person_id,tempPerson.person_id); // I have 60 attributes which I to update on each object, is there a quicker way other than overwriting existing? index++; } } else { NSLog(@"Number of people downloaded is different to number of players existing"); So now comes the slow part. I end up using this (which is tooooo slow): NSLog(@"Need people added to the league"); for (person *tempPerson in peopeArrayDownloaded) { NSPredicate *predicate = [NSPredicate predicateWithFormat:@"person_id = %@",tempPerson.person_id]; // NSLog(@"Searching for existing person, person_id: %@",existingPerson.person_id); NSArray *filteredArray = [peopleArrayExisting filteredArrayUsingPredicate:predicate]; if ([filteredArray count] == 0) { NSLog(@"Couldn't find an existing person in the downloaded file. Adding.."); person *newPerson = [NSEntityDescription insertNewObjectForEntityForName:@"person" inManagedObjectContext:managedObjectContextPeople]; Is there a way to generate a new array of index items referring to the additional items in my downloaded file? Incidentally, on my tableViews I'm using NSFetchedResultsController so updating attributes will call [cell setNeedsDisplay]; .. about 60 times per cell, not a good thing and it can crash the app. Thanks for reading :)

  Read the article

• 7u10: JavaFX packaging tools update

  - by igor

  Last weeks were very busy here in Oracle. JavaOne 2012 is next week. Come to see us there! Meanwhile i'd like to quickly update you on recent developments in the area of packaging tools. This is an area of ongoing development for the team, and we are  continuing to refine and improve both the tools and the process. Thanks to everyone who shared experiences and suggestions with us. We are listening and fixed many of reported issues. Please keep them coming as comments on the blog or (even better) file issues directly to the JIRA. In this post i'll focus on several new packaging features added in JDK 7 update 10: Self-Contained Applications: Select Java Runtime to bundle Self-Contained Applications: Create Package without Java Runtime Self-Contained Applications: Package non-JavaFX application Option to disable proxy setup in the JavaFX launcher Ability to specify codebase for WebStart application Option to update existing jar file Self-Contained Applications: Specify application icon Self-Contained Applications: Pass parameters on the command line All these features and number of other important bug fixes are available in the developer preview builds of JDK 7 update 10 (build 8 or later). Please give them a try and share your feedback! Self-Contained Applications: Select Java Runtime to bundle Packager tools in 7u6 assume current JDK (based on java.home property) is the source for embedded runtime. This is useful simplification for many scenarios but there are cases where ability to specify what to embed explicitly is handy. For example IDE may be using fixed JDK to build the project and this is not the version you want to bundle into your application. To make it more flexible we now allow to specify location of base JDK explicitly. It is optional and if you do not specify it then current JDK will be used (i.e. this change is fully backward compatible). New 'basedir' attribute was added to <fx:platform> tag. Its value is location of JDK to be used. It is ok to point to either JRE inside the JDK or JDK top level folder. However, it must be JDK and not JRE as we need other JDK tools for proper packaging and it must be recent version of JDK that is bundled with JavaFX (i.e. Java 7 update 6 or later). Here are examples (<fx:platform> is part of <fx:deploy> task): <fx:platform basedir="${java.home}"/> <fx:platform basedir="c:\tools\jdk7"/> Hint: this feature enables you to use packaging tools from JDK 7 update 10 (and benefit from bug fixes and other features described below) to create application package with bundled FCS version of JRE 7 update 6. Self-Contained Applications: Create Package without Java Runtime This may sound a bit puzzling at first glance. Package without embedded Java Runtime is not really self-contained and obviously will not help with: Deployment on fresh systems. JRE need to be installed separately (and this step will require admin permissions). Possible compatibility issues due to updates of system runtime. However, these packages are much much smaller in size. If download size matters and you are confident that user have recommended system JRE installed then this may be good option to consider if you want to improve user experience for install and launch. Technically, this is implemented as an extension of previous feature. Pass empty string as value for 'basedir' attribute and this will be treated as request to not bundle Java runtime, e.g. <fx:platform basedir=""/> Self-Contained Applications: Package non-JavaFX application One of popular questions people ask about self-contained applications - can i package my Java application as self-contained application? Absolutely. This is true even for tools shipped with JDK 7 update 6. Simply follow steps for creating package for Swing application with integrated JavaFX content and they will work even if your application does not use JavaFX. What's wrong with it? Well, there are few caveats: bundle size is larger because JavaFX is bundled whilst it is not really needed main application jar needs to be packaged to comply to JavaFX packaging requirements(and this may be not trivial to achieve in your existing build scripts) javafx application launcher may not work well with startup logic of your application (for example launcher will initialize networking stack and this may void custom networking settings in your application code) In JDK 7 update 6 <fx:deploy> was updated to accept arbitrary executable jar as an input. Self-contained application package will be created preserving input jar as-is, i.e. no JavaFX launcher will be embedded. This does not help with first point above but resolves other two. More formally following assertions must be true for packaging to succeed: application can be launched as "java -jar YourApp.jar" from the command line  mainClass attribute of <fx:application> refers to application main class <fx:resources> lists all resources needed for the application To give you an example lets assume we need to create a bundle for application consisting of 3 jars:     dist/javamain.jar     dist/lib/somelib.jar    dist/morelibs/anotherlib.jar where javamain.jar has manifest with      Main-Class: app.Main     Class-Path: lib/somelib.jar morelibs/anotherlib.jar Here is sample ant code to package it: <target name="package-bundle"> <taskdef resource="com/sun/javafx/tools/ant/antlib.xml" uri="javafx:com.sun.javafx.tools.ant" classpath="${javafx.tools.ant.jar}"/> <fx:deploy nativeBundles="all" width="100" height="100" outdir="native-packages/" outfile="MyJavaApp"> <info title="Sample project" vendor="Me" description="Test built from Java executable jar"/> <fx:application id="myapp" version="1.0" mainClass="app.Main" name="MyJavaApp"/> <fx:resources> <fx:fileset dir="dist"> <include name="javamain.jar"/> <include name="lib/somelib.jar"/> <include name="morelibs/anotherlib.jar"/> </fx:fileset> </fx:resources> </fx:deploy> </target> Option to disable proxy setup in the JavaFX launcher Since JavaFX 2.2 (part of JDK 7u6) properly packaged JavaFX applications  have proxy settings initialized according to Java Runtime configuration settings. This is handy for most of the application accessing network with one exception. If your application explicitly sets networking properties (e.g. socksProxyHost) then they must be set before networking stack is initialized. Proxy detection will initialize networking stack and therefore your custom settings will be ignored. One way to disable proxy setup by the embedded JavaFX launcher is to pass "-Djavafx.autoproxy.disable=true" on the command line. This is good for troubleshooting (proxy detection may cause significant startup time increases if network is misconfigured) but not really user friendly. Now proxy setup will be disabled if manifest of main application jar has "JavaFX-Feature-Proxy" entry with value "None". Here is simple example of adding this entry using <fx:jar> task: <fx:jar destfile="dist/sampleapp.jar"> <fx:application refid="myapp"/> <fx:resources refid="myresources"/> <fileset dir="build/classes"/> <manifest> <attribute name="JavaFX-Feature-Proxy" value="None"/> </manifest> </fx:jar> Ability to specify codebase for WebStart application JavaFX applications do not need to specify codebase (i.e. absolute location where application code will be deployed) for most of real world deployment scenarios. This is convenient as application does not need to be modified when it is moved from development to deployment environment. However, some developers want to ensure copies of their application JNLP file will redirect to master location. This is where codebase is needed. To avoid need to edit JNLP file manually <fx:deploy> task now accepts optional codebase attribute. If attribute is not specified packager will generate same no-codebase files as before. If codebase value is explicitly specified then generated JNLP files (including JNLP content embedded into web page) will use it.  Here is an example: <fx:deploy width="600" height="400" outdir="Samples" codebase="http://localhost/codebaseTest" outfile="TestApp"> .... </fx:deploy> Option to update existing jar file JavaFX packaging procedures are optimized for new application that can use ant or command line javafxpackager utility. This may lead to some redundant steps when you add it to your existing build process. One typical situation is that you might already have a build procedure that produces executable jar file with custom manifest. To properly package it as JavaFX executable jar you would need to unpack it and then use javafxpackager or <fx:jar> to create jar again (and you need to make sure you pass all important details from your custom manifest). We added option to pass jar file as an input to javafxpackager and <fx:jar>. This simplifies integration of JavaFX packaging tools into existing build  process as postprocessing step. By the way, we are looking for ways to simplify this further. Please share your suggestions! On the technical side this works as follows. Both <fx:jar> and javafxpackager will attempt to update existing jar file if this is the only input file. Update process will add JavaFX launcher classes and update the jar manifest with JavaFX attributes. Your custom attributes will be preserved. Update could be performed in place or result may be saved to a different file. Main-Class and Class-Path elements (if present) of manifest of input jar file will be used for JavaFX application  unless they are explicitly overriden in the packaging command you use. E.g. attribute mainClass of <fx:application> (or -appclass in the javafxpackager case) overrides existing Main-Class in the jar manifest. Note that class specified in the Main-Class attribute could either extend JavaFX Application or provide static main() method. Here are examples of updating jar file using javafxpackager: Create new JavaFX executable jar as a copy of given jar file javafxpackager -createjar -srcdir dist -srcfiles fish_proto.jar -outdir dist -outfile fish.jar  Update existing jar file to be JavaFX executable jar and use test.Fish as main application class javafxpackager -createjar -srcdir dist -appclass test.Fish -srcfiles fish.jar -outdir dist -outfile fish.jar  And here is example of using <fx:jar> to create new JavaFX executable jar from the existing fish_proto.jar: <fx:jar destfile="dist/fish.jar"> <fileset dir="dist"> <include name="fish_proto.jar"/> </fileset> </fx:jar> Self-Contained Applications: Specify application icon The only way to specify application icon for self-contained application using tools in JDK 7 update 6 is to use drop-in resources. Now this bug is resolved and you can also specify icon using <fx:icon> tag. Here is an example: <fx:deploy ...> <fx:info> <fx:icon href="default.png"/> </fx:info> ... </fx:deploy> Few things to keep in mind: Only default kind of icon is applicable to self-contained applications (as of now) Icon should follow platform specific rules for sizes and image format (e.g. .ico on Windows and .icns on Mac) Self-Contained Applications: Pass parameters on the command line JavaFX applications support two types of application parameters: named and unnamed (see the API for Application.Parameters). Static named parameters can be added to the application package using <fx:param> and unnamed parameters can be added using <fx:argument>. They are applicable to all execution modes including standalone applications. It is also possible to pass parameters to a JavaFX application from a Web page that hosts it, using <fx:htmlParam>.  Prior to JavaFX 2.2, this was only supported for embedded applications. Starting from JavaFX 2.2, <fx:htmlParam> is applicable to Web Start applications also. See JavaFX deployment guide for more details on this. However, there was no way to pass dynamic parameters to the self-contained application. This has been improved and now native launchers will  delegate parameters from command line to the application code. I.e. to pass parameter to the application you simply need to run it as "myapp.exe somevalue" and then use getParameters().getUnnamed().get(0) to get "somevalue".

  Read the article

• Windows XP - Security Update for Windows XP (KB923561) (KB946648) (KB956572) (KB958644)

  - by leeand00

  My father's computer has Windows XP, but when I try to install the service packs it always fails. What gives? Here are the errors that I get in the event log: Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Category: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB946648). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 38 33 44 31 41 44 ={83D1AD 0028: 46 35 2d 37 37 39 44 2d F5-779D- 0030: 34 30 31 36 2d 38 43 33 4016-8C3 0038: 31 2d 35 34 39 32 37 30 1-549270 0040: 46 36 37 42 33 46 7d 20 F67B3F} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 34 20 00 04 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Catagory: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB956572). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 44 46 32 46 30 41 ={DF2F0A 0028: 39 38 2d 36 45 33 35 2d 98-6E35- 0030: 34 33 37 39 2d 41 42 33 4379-AB3 0038: 33 2d 41 30 33 30 33 45 3-A0303E 0040: 46 37 34 42 32 41 7d 20 F74B2A} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 32 20 00 02 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer EVO Source: Windows Update Agent Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB958644). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 39 33 39 37 41 32 ={9397A2 0028: 31 46 2d 32 34 36 43 2d 1F-246C- 0030: 34 35 33 42 2d 41 43 30 453B-AC0 0038: 35 2d 36 35 42 46 34 46 5-65BF4F 0040: 43 36 42 36 38 42 7d 20 C6B68B} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 31 20 00 01 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Category: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB923561). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 33 31 30 41 34 43 ={310A4C 0028: 30 38 2d 35 39 33 44 2d 08-593D- 0030: 34 31 41 33 2d 42 42 35 41A3-BB5 0038: 37 2d 38 33 42 33 38 36 7-83B386 0040: 44 37 37 33 42 35 7d 20 D773B5} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 33 20 00 03 . Thank you, Andrew

  Read the article

• Sage 50 Accounts 2010 wont run on windows 7

  - by admintech

  I have sucessfuly installed Sage 50 Accounts 2010 onto my 32 bit Windows 7 machine, yet whenever i try to run it i encounter - Log Name: Application Source: Application Error Date: 24/05/2010 17:14:13 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: LukeThomas-PC.domain.co.uk Description: Faulting application name: Sage.SBD.Platform.Installation.SoftwareUpdates.UI.exe, version: 2.0.0.91, time stamp: 0x4a8c22fe Faulting module name: igdumd32.dll, version: 8.15.10.1872, time stamp: 0x4a848a05 Exception code: 0xc0000409 Fault offset: 0x00012f96 Faulting process id: 0x1778 Faulting application start time: 0x01cafb5c2493b609 Faulting application path: C:\Program Files\Common Files\Sage SBD\Sage.SBD.Platform.Installation.SoftwareUpdates.UI.exe Faulting module path: C:\Windows\system32\igdumd32.dll Report Id: 63e2246b-674f-11df-96ba-002564c97988 Event Xml: 1000 2 100 0x80000000000000 5062 Application LukeThomas-PC.domain.co.uk Sage.SBD.Platform.Installation.SoftwareUpdates.UI.exe 2.0.0.91 4a8c22fe igdumd32.dll 8.15.10.1872 4a848a05 c0000409 00012f96 1778 01cafb5c2493b609 C:\Program Files\Common Files\Sage SBD\Sage.SBD.Platform.Installation.SoftwareUpdates.UI.exe C:\Windows\system32\igdumd32.dll 63e2246b-674f-11df-96ba-002564c97988 Any help would be appreciated as i cant find anything about this error

  Read the article

• Trying to make a custom Arch-based Linux distro with larch

  - by strangeronyourtrain

  I'm all set up with a spiffy Arch installation in a virtual machine, and now I want to turn it into a live ISO. When I heard about larch, I thought it would be the perfect tool to turn my existing installation into something I could distribute. However, I can't get larch to install properly. I followed the installation instructions on the website, which said to download and run the larch-setup script. When I run it, though, it installs the larch profiles and libraries but doesn't install the executable programs. Here's a screenshot of the errors I get when larch-setup tries to install the executables. I'd greatly appreciate any clues to what is going wrong here, or suggestions for alternative ways to turn my customized Arch installation into an ISO! Thanks!

  Read the article

< Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >