Search Results

Search found 20140 results on 806 pages for 'output formatting'.

Page 174/806 | < Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >

• ISCSI Target Ubuntu

  - by erai

  I'm trying to setup iscsitarget on Ubuntu 12.04 but I can't connect to it. On the windows machine it says Target Error. with no other output. My ietd.conf is Target iqn.2012-06.com.org:virtual_machines.lun Lun 0 Type=fileio,Path=/media/volume0/storlun0.bin When I run iscsiadm -m discovery -t st -p localhost The output is iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 closed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: connection login retries (reopen_max) 5 exceeded iscsiadm: Could not perform SendTargets discovery. dmesg output: [ 3324.804665] iscsi_trgt: Removing all connections, sessions and targets [ 3325.875343] iSCSI Enterprise Target Software - version 1.4.20.3 [ 3325.875415] iscsi_trgt: Registered io type fileio [ 3325.875420] iscsi_trgt: Registered io type blockio [ 3325.875425] iscsi_trgt: Registered io type nullio

  Read the article

• Run FTP session from bash script

  - by Adam Salkin

  I'm trying to write a BASH script to test if an FTP site that I own is running. I therefore want the bash script to connect to the FTP site, log in with a dummy account and redirect the output to a file that I can then grep to confirm that the login succeeded. (I know that putting user/pass in a file is not recommended, but this dummy account is chrooted to one empty directory and can't escape to the shell, and in any case I'm the only user who can login to a shell prompt.) I'm using the BASH shell on Ubuntu. I created a file called "ftp-dummy" which looks like this username password And I then did this from the prompt: adam$ ftp my.ftpsite.com < ftp-dummy This does not work - I don't see the normal welcome message and the output is: Password:Name (my.ftpsite.com:adam) : I tried removing the space between the < and the filename - same result. If I redirect the output to a testfile, the testfile shows: Name (my.ftpsite.com:adam): ?Invalid command And I still get a Password prompt on STDOUT I also tried using echo and get the same result: echo -e "username \npassword \n" | ftp my.ftpsite.com I don't see why I'm not seeing the normal welcome message or why the input is not being read from the file. Any help would be much appreciated. Thanks, Adam

  Read the article

• Allow access from outside network with dmz and iptables

  - by Ivan

  I'm having a problem with my home network. So my setup is like this: In my Router (using Ubuntu desktop v11.04), I installed squid proxy as my transparent proxy. So I would like to use dyndns to my home network so I could be access my server from the internet, and also I installed CCTV camera and I would like to enable watching it from internet. The problem is I cannot access it from outside the net. I already set DMZ in my modem to my router ip. My first guess is because i'm using iptables to redirect all inside network to use squid. And not allow from outside traffic to my inside network. Here is my iptables script: #!/bin/sh # squid server IP SQUID_SERVER="192.168.5.1" # Interface connected to Internet INTERNET="eth0" # Interface connected to LAN LAN_IN="eth1" # Squid port SQUID_PORT="3128" # Clean old firewall iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X # Load IPTABLES modules for NAT and IP conntrack support modprobe ip_conntrack modprobe ip_conntrack_ftp # For win xp ftp client #modprobe ip_nat_ftp echo 1 > /proc/sys/net/ipv4/ip_forward # Setting default filter policy iptables -P INPUT DROP iptables -P OUTPUT ACCEPT # Unlimited access to loop back iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # Allow UDP, DNS and Passive FTP iptables -A INPUT -i $INTERNET -m state --state ESTABLISHED,RELATED -j ACCEPT # set this system as a router for Rest of LAN iptables --table nat --append POSTROUTING --out-interface $INTERNET -j MASQUERADE iptables --append FORWARD --in-interface $LAN_IN -j ACCEPT # unlimited access to LAN iptables -A INPUT -i $LAN_IN -j ACCEPT iptables -A OUTPUT -o $LAN_IN -j ACCEPT # DNAT port 80 request comming from LAN systems to squid 3128 ($SQUID_PORT) aka transparent proxy iptables -t nat -A PREROUTING -i $LAN_IN -p tcp --dport 80 -j DNAT --to $SQUID_SERVER:$SQUID_PORT # if it is same system iptables -t nat -A PREROUTING -i $INTERNET -p tcp --dport 80 -j REDIRECT --to-port $SQUID_PORT # DROP everything and Log it iptables -A INPUT -j LOG iptables -A INPUT -j DROP If you know where did I miss, please advice me. Thanks for all your help and I really appreciate it.

  Read the article

• Munin with postgresql 9.2

  - by jreid9001

  I am trying to set up Munin to collect stats on a server with postgresql 9.1 and 9.2 (the server is currently running 9.1, have tested on a fresh VM with 9.2 to rule out some weird problem on the running server. I had to patch some of the plugins for 9.2 due to renamed columns (e.g. procpid to pid), but that's no problem). Munin is installed from the EPEL repos, postgres from the official one. Both up to date. When I try to run munin-node-configure --suggest, I get this output: # The following plugins caused errors: # postgres_bgwriter: # Junk printed to stderr # postgres_cache_: # Junk printed to stderr # postgres_checkpoints: # Junk printed to stderr # postgres_connections_: # Junk printed to stderr # postgres_connections_db: # Junk printed to stderr # postgres_locks_: # Junk printed to stderr # postgres_querylength_: # Junk printed to stderr # postgres_scans_: # Junk printed to stderr # postgres_size_: # Junk printed to stderr # postgres_transactions_: # Junk printed to stderr # postgres_tuples_: # Junk printed to stderr # postgres_users: # Junk printed to stderr # postgres_xlog: # Junk printed to stderr After a lot of searching around, I edited /etc/munin/plugin-conf.d/munin-node and added the following: [postgres*] user postgres This stops munin-node-configure complaining about stderr and lets me add the plugins, but when I telnet to the server on 4949 and try to fetch the stats, I just get "Bad exit". When I run the plugin individually via munin-run (e.g. munin-run postgres_size_ALL ), it works completely fine. Looking at /var/log/munin/munin-node.log, this is the output: Error output from postgres_size_ALL: DBI connect('dbname=template1','',...)failed: could not connect to server: Permission denied Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? at /usr/share/perl5/vendor_perl/Munin/Plugin/Pgsql.pm line 377 Service 'postgres_size_ALL exited with status 1/0. I am now out of ideas... the socket definitely exists, and pg_hba.conf is set to allow all users/databases from localhost with trust.

  Read the article

• lm-sensors - always returns 32 degrees (celsius) for temperature

  - by mopoke

  On my VIA EPIA motherboard (using VIA VT8231 ISA bridge), I get strange output for the lm-sensors temperature reading. It always returns 32 degrees (celsius). I have previously had correct output for temperature (my munin graphs show temperatures typically in the range of 50 to 60 degrees. I've tried uninstalling (and purging) the lm-sensors package, have re-run sensors-detect a number of times and rebooted but nothing seems to change the output. I am running Ubuntu Karmic Koala (9.10). Anyone got any bright ideas on what I might have missed? uname -a: Linux george 2.6.31-16-386 #53-Ubuntu SMP Tue Dec 8 06:39:34 UTC 2009 i686 GNU/Linux cpuinfo: processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 7 model name : VIA Samuel 2 stepping : 3 cpu MHz : 399.000 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow up bogomips : 800.04 clflush size : 32 power management: lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] 00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10) 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51) 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a) sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +32.0°C (crit = +60.0°C)

  Read the article

• Routing data through VPN in linux

  - by Shadyabhi

  I think its a silly question but still here it goes.. Terminal Output: eth0 Link encap:Ethernet HWaddr 00:1c:c0:37:5e:25 inet addr:10.100.98.51 Bcast:10.100.98.255 Mask:255.255.255.0 inet6 addr: fe80::21c:c0ff:fe37:5e25/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:29677 errors:0 dropped:0 overruns:0 frame:0 TX packets:5209 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:3179007 (3.1 MB) TX bytes:610142 (610.1 KB) Memory:e0380000-e03a0000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:76 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:9555 (9.5 KB) TX bytes:9555 (9.5 KB) vpn_0 Link encap:Ethernet HWaddr 00:ac:39:95:a1:16 inet6 addr: fe80::2ac:39ff:fe95:a116/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1786 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:128597 (128.5 KB) TX bytes:468 (468.0 B) Actually, I followed this tutorial to setup the PacketiX VPN on ubuntu. Now, how do I actually use this VPN? Terminal Output: shadyabhi@shadyabhi-desktop:~$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 default 10.100.98.4 0.0.0.0 UG 0 0 0 eth0 shadyabhi@shadyabhi-desktop:~$ As told in tutorial, if I do route del default route add default dev vpn_0 I am not able to surf the internet. And I get the route command output as: root@shadyabhi-desktop:/home/shadyabhi# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 default * 0.0.0.0 U 0 0 0 vpn_0 root@shadyabhi-desktop:/home/shadyabhi# I know I am not able to route the traffic properly. How do i do that?

  Read the article

• sg_map & lsscsi showing old storage version

  - by PratapSingh

  I am using SUN storage and recently upgraded/refreshed my ISCSI LUN storage. We have replicated old storage to new storage and attached to our servers. I can see at SUN storage side that storage is attached to server and also from server when I run the below command it prints the following output : iscsiadm -m session tcp: [1] 10.1.1.10:3260,2 iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd The above storage is SUN STORAGE 7420 But when I run sg_map or lsscsi command it prints different version: lsscsi disk SUN Sun Storage 7410 1.0 /dev/sda disk SUN Sun Storage 7410 1.0 /dev/sdb disk SUN Sun Storage 7410 1.0 /dev/sdc disk SUN Sun Storage 7410 1.0 /dev/sdd Output of ls on "/dev/disk/by-path/" ls -1 /dev/disk/by-path/ ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-0 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-0-part1 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-18 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-18-part1 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-2 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-2-part1 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-4 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-4-part1 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-6 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-6-part1 I have rebooted server twice but still I am getting the same output as given above.

  Read the article

• How to extract a Vorbis stream from a WAVE file?

  - by H.B.

  I would like to move the Vorbis stream into an ogg container but ffmpeg does not seem to recognize the stream. Even though MPlayer gives this output upon playback: Opening audio decoder: [acm] Win32/ACM decoders Loading codec DLL: 'vorbis.acm' Loaded DLL driver vorbis.acm at 10000000 Warning! ACM codec reports srcsize=0 AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000-176400) Selected audio codec: [vorbisacm] afm: acm (OggVorbis ACM) ffmpeg: ffmpeg -i Source.wav -acodec copy Target.ogg Input #0, wav, from 'Source.wav': Duration: 00:02:15.17, bitrate: 128 kb/s Stream #0.0: Audio: qg[0][0] / 0x6771, 44100 Hz, 2 channels, 128 kb/s [ogg @ 00000000003096C0] Unsupported codec id in stream 0 Output #0, ogg, to 'Target.ogg': Metadata: encoder : Lavf53.6.0 Stream #0.0: Audio: qg[0][0] / 0x6771, 44100 Hz, 2 channels, 128 kb/s Stream mapping: Stream #0.0 -> #0.0 Could not write header for output file #0 (incorrect codec parameters ?) Of course this does not necessarily need to be done via ffmpeg, any method that is workable would be fine... I have cut down one of the files to 512KB: sample.wav (Changed two chunk size fields in the wave header to account for this, the embedded stream is cut "without notice")

  Read the article

• Internet slowed down because of SQUID Server setup

  - by Ranjith Kumar

  Recently I have setup a squid server for our office. I have computer (A) with two ethernet cards, one for internet and the second one for local networkIt has Ubuntu server OS with squid-server and dhcp3-server installedI have added few iptable rules to work like a router and redirect all http traffic to 3128 port This link is my reference. Everything worked fine for 2 days. All of a sudden internet speed went down drastically. When I connected the internet cable to my laptop to test the internet speed it was fine. Again when I reconnected it back to computer A everything was normal. This happened 4 times in a week. Could anyone here please help me why the internet speed is going down and it becomes normal when I reconnect the cable. EDIT: Rebooting the system (computer A) didn't make a difference. I have changed iptables so that http traffic doesn't redirect to 3128 port any further, still no change in the internet speed. I think the problem is not with squid but with something else. Here are my iptable rules SQUID_SERVER="10.1.1.1" INTERNET="eth1" LAN_IN="eth0" SQUID_PORT="3128" PROXYSERVERS=(Atlanta Baltimore Boston Chicago Dallas Denver Houston KansasCity LosAngeles Miami NewYork Philadelphia Phoenix SanAntonio SanDiego SanJose Seattle Washington) SERVERLEN=${#PROXYSERVERS[*]} I=0 iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X modprobe ip_conntrack modprobe ip_conntrack_ftp echo 1 /proc/sys/net/ipv4/ip_forward iptables -P INPUT DROP iptables -P OUTPUT ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT iptables -A INPUT -i $INTERNET -m state --state ESTABLISHED,RELATED -j ACCEPT iptables --table nat --append POSTROUTING --out-interface $INTERNET -j MASQUERADE iptables --append FORWARD --in-interface $LAN_IN -j ACCEPT iptables -A INPUT -i $LAN_IN -j ACCEPT iptables -A OUTPUT -o $LAN_IN -j ACCEPT while [ $I -lt $SERVERLEN ]; do iptables -t nat -A PREROUTING -i $LAN_IN -p tcp -d ${PROXYSERVERS[$I]}.wonderproxy.com --dport 80 -j ACCEPT let I++ done iptables -t nat -A PREROUTING -i $LAN_IN -p tcp --dport 80 -j DNAT --to $SQUID_SERVER:$SQUID_PORT iptables -A INPUT --protocol tcp --dport 80 -j ACCEPT iptables -A INPUT --protocol tcp --dport 443 -j ACCEPT iptables -A INPUT --protocol tcp --dport 22 -j ACCEPT iptables -A INPUT -j LOG iptables -A INPUT -j DROP

  Read the article

• FFMPEG: how to add watermark to video?

  - by DocWiki

  My Platform: Ubuntu 10.10 + FFMPEG 0.5.3(I installed ffmpeg from source) I try to add Watermark to a .MOV video with FFMPEG 0.5.3 imlib2.so (Please note FFMPEG 0.6+ dont support imlib2.so, so I use ffmpeg 0.5.3) Here is my code: ffmpeg -sameq -i example.mov -vhook '/usr/local/lib/vhook/imlib2.so -x 0 -y 0 -i /var/www/files/watermark.png' newexample.mov Here is the output: FFmpeg version 0.5.3, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --enable-avfilter --enable-filter=movie --enable-avfilter-lavf libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 built on Jul 3 2011 12:05:08, gcc: 4.4.5 Seems stream 1 codec frame rate differs from container frame rate: 59.94 (5994/100) - 29.97 (30000/1001) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'example.mov': Duration: 00:03:14.06, start: 0.000000, bitrate: 3350 kb/s Stream #0.0(eng): Audio: aac, 48000 Hz, stereo, s16 Stream #0.1(eng): Video: h264, yuv420p, 1150x647, 29.97 tbr, 29.97 tbn, 59.94 tbc Output #0, mov, to 'newexample.mov': Stream #0.0(eng): Video: mpeg4, yuv420p, 1150x647, q=2-31, 200 kb/s, 90k tbn, 29.97 tbc Stream #0.1(eng): Audio: 0x0000, 48000 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.1 - #0.0 Stream #0.0 - #0.1 Unsupported codec for output stream #0.1 What could be the possible problem? Is that AAC or H264 that is not supported? I installed libavcodec-extra-52, linfaac, libfaad and etc. but the error is the same. Do I have to install following this instruction? HOWTO: Install and use the latest FFmpeg and x264 or there is a simpler solution?

  Read the article

• Cron won't use msmtp to send emails in case of failed cronjob

  - by Glister

  I'm trying to configure a machine so that it will send me an email if one of the cronjobs output something in case of an error. I'm using Debian Wheezy. Cron is working normally (without the email functionality). msmtp is installed and configured. Have already symlinked /usr/{bin|sbin}/sendmail to /usr/bin/msmtp. I can send email by using: echo "test" | mail -s "subject" [email protected] or by executing: echo "test" | /usr/sbin/sendmail Without the symlink (/usr/sbin/sendmail) cron will tell me that: (CRON) info (No MTA installed, discarding output) With the symlinks I get: (root) MAIL (mailed 1 byte of output; but got status 0x004e, #012) Can you suggest how to config the cron/msmtp pair? Thanks! EDIT: Note: I've written "msmtpd" by mistake. Its not a daemon but rather an SMTP client named just "msmtp" (without the "d" ending). It is executed on demand and it is not running in the background all the time. When I try to send an email by using msmtp like that it works: echo "test" | msmtp [email protected] On the far side, in the logs of the SMTP server I read: Nov 2 09:26:10 S01 postfix/smtpd[12728]: connect from unknown[CLIENT_IP] Nov 2 09:26:12 S01 postfix/smtpd[12728]: 532301C318: client=unknown[CLIENT_IP], sasl_method=CRAM-MD5, [email protected] Nov 2 09:26:12 S01 postfix/cleanup[12733]: 532301C318: message-id=<> Nov 2 09:26:12 S01 postfix/qmgr[2404]: 532301C318: from=<[email protected]>, size=191, nrcpt=1 (queue active) Nov 2 09:26:12 S01 postfix/local[12734]: 532301C318: to=<[email protected]>, orig_to=<[email protected]>, relay=local, delay=0.62, delays=0.59/0.01/0/0.03, dsn=2.0.0, status=sent (delivered to command: IFS=' ' && exec /usr/bin/procmail -f- || exit 75 #1001) Nov 2 09:26:12 S01 postfix/qmgr[2404]: 532301C318: removed Nov 2 09:26:13 S01 postfix/smtpd[12728]: disconnect from unknown[CLIENT_IP] And the Email is delivered to the target user. So it looks like that the msmtp client is working properly. It has to be something in the cron/msmtp integration, but I have no clue what that thing might be. Can you help me?

  Read the article

• Natting trafic from a tunnel to internet

  - by mezgani

  I'm trying to set up a GRE tunnel between a linux box and a router (LAN), and I'm having a few problems which seem to depend to my iptables configuration. Watching with tcpdump on linux box, I can see packets coming with flags GREv0, all i need right know is forwarding this data to internet, found here some trace : iptables -F iptables -X iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -t nat -F iptables -t nat -X iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -t nat -P OUTPUT ACCEPT iptables -t mangle -F iptables -t mangle -X iptables -t mangle -P PREROUTING ACCEPT iptables -t mangle -P OUTPUT ACCEPT iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -o cloud -j ACCEPT iptables -A FORWARD -i cloud -o ppp0 -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE echo "1" /proc/sys/net/ipv4/ip_forward cloud Link encap:UNSPEC HWaddr C4-CE-7A-2E-F2-BF-DD-C0-00-00-00-00-00-00-00-00 inet adr:10.3.3.3 P-t-P:10.3.3.3 Masque:255.255.255.255 UP POINTOPOINT RUNNING NOARP MTU:1476 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:124 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:0 (0.0 B) TX bytes:10416 (10.1 KiB) Table de routage IP du noyau Destination Passerelle Genmask Indic MSS Fenêtre irtt Iface 196.206.120.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.3.3.0 0.0.0.0 255.255.255.0 U 0 0 0 cloud 0.0.0.0 196.206.120.1 0.0.0.0 UG 0 0 0 ppp0 root@aldebaran:~# ip route 196.206.120.1 dev ppp0 proto kernel scope link src 196.206.122.46 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.18 10.3.3.0/24 dev cloud scope link default via 196.206.120.1 dev ppp0

  Read the article

• Trouble cloning a Macbook Pro hard drive

  - by Mirko Froehlich

  I am trying to upgrade the 250GB hard drive in my MacBook Pro (early 2008 model) to a 750GB drive. I have connected the new drive via an external USB enclosure. The drive is recognized fine, I can format it, etc. However, every time I try to clone the drive, I am getting Input/Output errors. Before the clone operation, I have verified both the internal and the external drive using Disk Utility, and they both check out fine. After the clone operation, the external drive shows multiple "Invalid node structure" errors: I have tried two approaches for cloning the drive: Using Disk Utility, by starting from the OSX install DVD Using Carbon Copy Cloner The outcome is the same in both cases. The Carbon Copy Cloner logs show a handful of the following types of errors: rsync: mkstemp "<... an external filename ...>" failed: Input/output error (5) rsync: stat "<... an external filename ...>" failed: Input/output error (5) The actual files affected seem to be different across different runs of the application. Before the last run, I used Disk Utility to (once more) reformat the external drive and explicitly overwrite it with zeros, but this made no difference. I also tried running a surface scan in Tech Tool Pro overnight. It got about 2/3 of the way through before I had to disconnect the drive (had to take my MacBook Pro to work), but so far it didn't report any bad blocks. Assuming it scans the drive in the same order in which blocks would be allocated during actual use, it seems like if bad blocks were to blame for the clone failures, they should have been found already (given that the source drive is only 250GB). As a last attempt, I may try SuperDuper as well, although my understanding is that it uses the same underlying rsync approach as Carbon Copy Cloner, so it's unlikely to perform any better. Are there any other things I should try before I send the drive in for a replacement? Could these problems be caused by my internal drive, even though it works fine and checks out fine in Disk Utility?

  Read the article

• Sound out of sync after merging multiple mp4 files with Avidemux

  - by Goto10

  I am trying to join (merge) two or more .mp4 files together, without re-encoding. Here is what I did: Started Avidemux 2.5.5. With File-Open, selected Input1.mp4. I received this message - "H.264 detected. If the file is using B-frames as reference it can lead to a crash or stuttering. Avidemux can use another mode which is safe but YOU WILL LOOSE SOME FRAME ACCURACY. Do you want to use that mode?". I chose "No". With File-Append, selected Input2.mp4. I received the same "H.264 detected" message again and chose "No". Selected the Format to MP4 (from AVI). Saved the output file (called Output.mp4) with File-Save-Save Video. Unfortunately, when I play the Output.mp4 video in VLC, the sound is out of sync with the second video. How can I correct this?

  Read the article

• Nmap XML parsing with Powershell

  - by Craig620

  I am trying to parse the XML output from NMAP and isolate just the hostadddress and the vendor from the osmatch. I've actually done that with the following: select-xml -path nmap.xml -xpath "nmaprun/host/address/@addr|nmaprun/host/os/osmatch/osclass/@vendor" | select -expandproperty node Which produces: #text ----- 10.20.30.1 HP 10.20.30.2 Linux 10.20.30.3 HP What I was not expecting is that it would jam it all into a single column.Silly me would like the address in one column, and the vendor in another column. I Would like: #addr #vendor ----- ------- 10.20.30.1 HP 10.20.30.2 Linux 10.20.30.3 HP In the several hours I spent learning xpath today, I also realized that this file has a single address for each host, but multiple OS guesses for each host. I would also like to use only the first osGuess in the output. Tired using: -xpath "(nmaprun/host/os/osmatch/osclass/@vendor)[1]" But that truncates the whole data set to a single line of output, instead of only limiting the only the first osclass element of each host. Changing the parens to surround only the @vendor element like .../(@vendor)[1] and .../(@vendor[1]) but both fail with "Expression must evaluate to a node-set." Thanks in advance

  Read the article

• Unable to specify parameters to cvlc in a script

  - by VxJasonxV

  I'm creating a script that issues a few curl commands in order to access a time-protected mms stream link, then set up a relay using cvlc (vlc's command line interface) for my own use on an unencumbered player. The curl aspect of this is working, as I can run as a browser and curl side by side and get the same access url. (It's time locked meaning the stream will work forever, but you have to connect quickly or the URL will time out.) The very end of the script prints the command I will run, which is then followed up by "exec $CMD". When I echo $CMD I get: cvlc --sout '#standard{access=http,mux=asf,dst=0.0.0.0:58194}' mms://[...] Manually Copy/Pasting this command in, verbatim, works perfectly fine, but as part of a script, the cvlc execution output says: [0x9743d0] main interface error: no suitable interface module [0x962120] main libvlc error: interface "globalhotkeys,none" initialization failed [0x9743d0] dummy interface: using the dummy interface module... [0xb16e30] stream_out_standard stream out error: no mux specified or found by extension [0xb16ad0] main stream output error: stream chain failed for `standard{mux="",access="",dst="'#standard{access=http,mux=asf,dst=0.0.0.0:58194}'"}' [0xb11cd0] main input error: cannot start stream output instance, aborting [0xb11f70] signals interface error: Caught Interrupt signal, exiting... Why is --sout behaving one way in a script (non-interactive shell?) vs. another way in the foreground (interactive shell) ?

  Read the article

• fail2ban block ports rules iptable

  - by J Spen

  I just installed Ubuntu Server 14.04 and don't have much experience with IPtables. I am trying to get a basic setup going where I only accept SSH connections on port 22 and 2222. I actually have that working with no problem using fail2ban ssh. Then I wanted to block all other ports except 423 and 4242 but either method of DROPing all connections that are not listed seems not to work and it blocks me out of everything. Below is the setup that works: -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -N fail2ban-ssh -A INPUT -p tcp -m multiport --dports 22,2222 -j fail2ban-ssh -A fail2ban-ssh -j RETURN I tried to change it either to: -P INPUT DROP -P FORWARD ACCEPT -P OUTPUT ACCEPT -N fail2ban-ssh -A INPUT -p tcp -m multiport --dports 22,2222 -j fail2ban-ssh -A fail2ban-ssh -j RETURN or: -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -N fail2ban-ssh -A INPUT -p tcp -m multiport --dports 22,2222 -j fail2ban-ssh -A INPUT -j DROP -A fail2ban-ssh -j RETURN I have noticed that the rules for fail2ban-ssh are automatically added to my iptables on boot because if I save them with iptables-persistant they are entered twice. How do I go about blocking everything accept those 2 ports using fail2ban? Is it a bad fail2ban configuration or do I need to add the fail2ban-ssh -j Return somewhere else in my code.

  Read the article

• iptables rules to allow HTTP traffic to one domain only

  - by Emily

  Hi everyone, I need to configure my machine as to allow HTTP traffic to/from serverfault.com only. All other websites, services ports are not accessible. I came up with these iptables rules: #drop everything iptables -P INPUT DROP iptables -P OUTPUT DROP #Now, allow connection to website serverfault.com on port 80 iptables -A OUTPUT -p tcp -d serverfault.com --dport 80 -j ACCEPT iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT #allow loopback iptables -I INPUT 1 -i lo -j ACCEPT It doesn't work quite well: After I drop everything, and move on to rule 3: iptables -A OUTPUT -p tcp -d serverfault.com --dport 80 -j ACCEPT I get this error: iptables v1.4.4: host/network `serverfault.com' not found Try `iptables -h' or 'iptables --help' for more information. Do you think it is related to DNS? Should I allow it as well? Or should I just put IP addresses in the rules? Do you think what I'm trying to do could be achieved with simpler rules? How? I would appreciate any help or hints on this. Thanks a lot!

  Read the article

• Triple monitor setting in Linux with USB-HDMI adapter

  - by Oscar Carballal

  I'm trying to set up a triple monitor desktop at my office using Fedora 17, but it seems impossible, let me explain the setting: Laptop ASUS K53SD with 2 graphic cards, Intel and nVidia (Screen controled by Intel card) 24" Full HD monitor connected to the HDMI output (controlled by Intel card) 23" Full HD monitor connected to an USB-HDMI adapter (via framebuffer in /dev/fb2, apparently) VGA output (not used) controlled by nVidia card First of all, the USB-HDMI adapter works perfectly, it gives me a green screen (which means the communication is OK) and I can make it work if I set up a single monitor setting via framebuffer in Xorg. Here I leave the page where I got the instructions: http://plugable.com/2011/12/23/usb-graphics-and-linux Now I'm trying to set up the the two main monitors (laptop and 24") with the intel driver and the 23" with the framebuffer, but the most succesful configuration I get is the two main monitors working and the third disconnected. Do you have any idea what can I do to make this work? Here I leave my xRandr output and my Xorg conf: -> xrandr Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA2 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 531mm x 299mm 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) 1920x1080_60.00 60.0 The Xorg file: # Xorg configuration file for using a tri-head display Section "ServerLayout" Identifier "Layout0" Screen 0 "HDMI" 0 0 Screen 1 "USB" RightOf "HDMI" Option "Xinerama" "on" EndSection ########### MONITORS ################ Section "Monitor" Identifier "USB1" VendorName "Unknown" ModelName "Acer 24as" Option "DPMS" EndSection Section "Monitor" Identifier "HDMI1" VendorName "Unknown" ModelName "Acer 23SH" Option "DPMS" EndSection ########### DEVICES ################## Section "Device" Identifier "Device 0" Driver "intel" BoardName "GeForce" BusID "PCI:0:02:0" Screen 0 EndSection Section "Device" Identifier "USB Device 0" driver "fbdev" Option "fbdev" "/dev/fb2" Option "ShadowFB" "off" EndSection ############## SCREENS ###################### Section "Screen" Identifier "HDMI" Device "Device 0" Monitor "HDMI1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "USB" Device "USB Device 0" Monitor "USB1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• pg_dump not working - do I need to change order of $PATH?

  - by A4J

  I'm trying to set the $PATH to pick up the latest version of pg_dump as I'm currently getting a mismatch error while doing a migrate in my Rails app (I recently changed the schema type to SQL). I have added a new file in /etc/profile.d called pg_dump.sh, and inside that put: PG_DUMP=/usr/pgsql-9.1 export PG_DUMP PATH=$PATH:$PG_DUMP/bin export PATH On looking at echo $PATH, I get: /usr/local/rvm/gems/ruby-1.9.3-p194/bin:/usr/local/rvm/gems/ruby-1.9.3-p194@global/bin:/usr/local/rvm/rubies/ruby-1.9.3-p194/bin:/usr/local/rvm/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pgsql-9.1/bin:/root/bin And I still get the error. Do I need to change the order? If so any ideas how? Output of 'ls /usr/pgsql-9.1/bin': clusterdb droplang pg_archivecleanup pg_ctl pg_standby psql createdb dropuser pg_basebackup pg_dump pg_test_fsync reindexdb createlang ecpg pgbench pg_dumpall pg_upgrade vacuumdb createuser initdb pg_config pg_resetxlog postgres vacuumlo dropdb oid2name pg_controldata pg_restore postmaster And output of 'which pg_dump': /usr/bin/pg_dump Error message on running cap 'deploy:migrate': ** [out :: 46.4.9.199] pg_dump: server version: 9.1.4; pg_dump version: 8.4.11 ** [out :: 46.4.9.199] pg_dump: aborting because of server version mismatch ** [out :: 46.4.9.199] rake aborted! ** [out :: 46.4.9.199] Error dumping database output of 'pg_dump --version': pg_dump (PostgreSQL) 8.4.11

  Read the article

• Timeout option not working on efi windows 7/windows8 dual boot machine

  - by Guenter

  I hav a gigbyte GA-Z77m-D3h mobo and installed Windows 8 Pro and Windows 7 Ultimate on two SSDs (in that order) in EFI mode. Now when I start my computer, I get the windows boot menu (text mode) with the two OSses to choose, but I have to manually press RETURN to have the computer boot into the Win OS. Even if I wait an hour, no default action takes place. Using bcdedit (from either of the OSses) I can successfully change the time out value, and it shows up in the bcdedit (no params) output. But it doesn't fire ... Here is my current BCDEdit output (headers are in German, but values should be readable): Windows-Start-Manager --------------------- Bezeichner {bootmgr} device partition=O: path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale de-DE inherit {globalsettings} integrityservices Enable default {default} resumeobject {5ad2802c-c60a-11e2-acdb-80331c501b11} displayorder {default} {current} {5ad2802a-c60a-11e2-acdb-80331c501b11} {5ad28028-c60a-11e2-acdb-80331c501b11} {5ad28029-c60a-11e2-acdb-80331c501b11} toolsdisplayorder {memdiag} timeout 5 displaybootmenu Yes Windows-Startladeprogramm ------------------------- Bezeichner {default} device partition=W: path \Windows\system32\winload.efi description Windows 7 locale de-DE inherit {bootloadersettings} recoverysequence {5ad2802e-c60a-11e2-acdb-80331c501b11} recoveryenabled Yes osdevice partition=W: systemroot \Windows resumeobject {5ad2802c-c60a-11e2-acdb-80331c501b11} nx OptIn Windows-Startladeprogramm ------------------------- Bezeichner {current} device partition=C: path \Windows\system32\winload.efi description Windows 8 locale de-DE inherit {bootloadersettings} recoverysequence {5ad28033-c60a-11e2-acdb-80331c501b11} integrityservices Enable recoveryenabled Yes isolatedcontext Yes allowedinmemorysettings 0x15000075 osdevice partition=C: systemroot \Windows resumeobject {5ad28031-c60a-11e2-acdb-80331c501b11} nx OptIn bootmenupolicy Standard hypervisorlaunchtype Auto (this output is from Win8; the Win7 looks nearly identical) If maybe the problem comes from a bad EFI Windows boot manager installation, can this be fixed without loosing my windows installations?

  Read the article

• Unable to run cvlc in a script

  - by VxJasonxV

  I'm creating a script that issues a few curl commands in order to access a time-protected mms stream link, then set up a relay using cvlc (vlc's command line interface) for my own use on an unencumbered player. The curl aspect of this is working, as I can run as a browser and curl side by side and get the same access url. (It's time locked meaning the stream will work forever, but you have to connect quickly or the URL will time out.) The very end of the script prints the command I will run, which is then followed up by "exec $CMD". When I echo $CMD I get: cvlc --sout '#standard{access=http,mux=asf,dst=0.0.0.0:58194}' mms://[...] But the cvlc execution output says: [0x9743d0] main interface error: no suitable interface module [0x962120] main libvlc error: interface "globalhotkeys,none" initialization failed [0x9743d0] dummy interface: using the dummy interface module... [0xb16e30] stream_out_standard stream out error: no mux specified or found by extension [0xb16ad0] main stream output error: stream chain failed for `standard{mux="",access="",dst="'#standard{access=http,mux=asf,dst=0.0.0.0:58194}'"}' [0xb11cd0] main input error: cannot start stream output instance, aborting [0xb11f70] signals interface error: Caught Interrupt signal, exiting... Why is it ignoring my --sout input?

  Read the article

• How to access a port via OpenVpn only

  - by Andy M

  I've set up an openvpn server alongside an apache website that can only be accessed on port 8100 on the same machine. My /etc/openvpn/server.conf file looks like this: port 1194 proto tcp dev tun ca ./easy-rsa2/keys/ca.crt cert ./easy-rsa2/keys/server.crt key ./easy-rsa2/keys/server.key # This file should be kept secret dh ./easy-rsa2/keys/dh1024.pem # Diffie-Hellman parameter server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt # make sure clients can still connect to the internet push "redirect-gateway def1 bypass-dhcp" keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 Now I tried to let only clients connected to the vpn network access the website on apache via port 8100. So I defined a few iptables rules: #!/bin/sh # My system IP/set ip address of server SERVER_IP="192.168.0.2" # Flushing all rules iptables -F iptables -X # Setting default filter policy iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP # Allow incoming access to port 8100 from OpenVPN 10.8.0.1 iptables -A INPUT -i tun0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o tun0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT # outgoing http iptables -A OUTPUT -o tun0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i tun0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT Now when I connect to the server from my client computer and try to access the website on 192.168.0.2:8100, my browser can't open it. Will I have to forward traffic from tun0 to eth0? Or is there anything else I'm missing?

  Read the article

• Ubuntu networking issue: two specific machines cannot browse web while connected to network at the same time.

  - by jensendarren

  I have setup a secure wireless network which works very well except for two laptops running Ubuntu 10.10 that can't access the Internet via a browser at the same time. They can both ping sites, wget sites, use skype but when using a browser the page never loads (in Firefox the status bar just sits there saying "Connecting" until it times out.) Here is what we have tried so far (nothing has fixed this issue): OpenDNS Restart networking services Using wired connection rather than wireless Removing all other nodes from the network except the two machines that have this issue Swapped out the router Factory reset the router Reformatted one of the machines and re-installed Ubuntu 10.10 Other things that we have checked: The two machines can connect simultaneously without any issues to other wireless networks in different locations (say in an Internet Cafe or another office) The two machines have unique IP addresses The two machines have unique MAC addresses The two machines can communicate on the network using Skype, wget, ping etc We are not using a proxy on either machine FYI: I have attached output from wireshark. For the test we turned both machines on and pointed them both to the same website. The content loaded on one and not the other. Here is the output from wireshark- (speedyshare.com/files/26228631/machine_output_1 && speedyshare.com/files/26228649/machine2). As you can see the first one worked, the second one didn't. I don't fully understand the output and would appreciate if someone could shed some light on what might be causing this and how we can fix it! Many thanks! Darren

  Read the article

• How to enable IPv6 glue records (AAAA) in PowerDNS

  - by aef

  I'm running a PowerDNS 3.1 on a Debian Wheezy Beta 4 system. The zone data is accessed through a PostgreSQL database, the server answers to both IPv4 and IPv6 queries. If the DNS-Server knows the A record for one of the name servers referenced by NS records on a zone, it automatically return these A records as additional information to the response on an NS query for that zone. Now even if it knows the AAAA record for one of the name servers of the NS records, it currently does never return an AAAA record as additional information. How can I enable this? Or is there anything I could be doing wrong? Output of dig @ns.mydomain.tld NS mydomain.tld: ;; QUESTION SECTION: ;mydomain.tld. IN NS ;; ANSWER SECTION: mydomain.tld. 86400 IN NS ns3.nsprovider.de. mydomain.tld. 86400 IN NS ns2.nsprovider.de. mydomain.tld. 86400 IN NS ns.mydomain.tld. mydomain.tld. 86400 IN NS ns.nsprovider.de. ;; ADDITIONAL SECTION: ns2.nsprovider.de. 86400 IN A 1.2.3.1 ns.nsprovider.de. 86400 IN A 1.2.3.2 ns.mydomain.tld. 600 IN A 192.0.2.194 ns3.nsprovider.de. 86400 IN A 1.2.3.3 Output of dig @ns.mydomain.tld A ns.mydomain.tld: ;; QUESTION SECTION: ;ns.mydomain.tld. IN A ;; ANSWER SECTION: ns.mydomain.tld. 600 IN A 192.0.2.194 Output of dig @ns.mydomain.tld AAAA ns.mydomain.tld: ;; QUESTION SECTION: ;ns.mydomain.tld. IN AAAA ;; ANSWER SECTION: ns.mydomain.tld. 86400 IN AAAA 2001:db8:100:3022:1::3

  Read the article

< Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >