Search Results

Search found 5727 results on 230 pages for 'routed commands'.

Page 175/230 | < Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >

• Windows SBS 2008 problem

  - by MadBoy

  I was today on clients site that has Windows 2008 SBS installed with Symantec EndPoint Protection. Problem is that after I logged in tried multiple commands like services.msc, msconfig typed in "Run" but nothing was started. For the first 5 minutes i can click around Start Menu, choose some applications (non microsoft works, even control panel works). But then something happens that I can't click where I want.. i can click on Start Menu and get it active but i cant choose anything from there, everything is like blocked, i can right click on Desktop i can do many things but most of the left clicks is blocked. Even when i start TaskMgr i am able to see it but I cannot click it, can't activate it or anything. It acts very very weird. It's newly installed system, with less then a month of when it was installed and it wasn't really used (been down most of the time). I suspect Symantec EndPoint protection might be faulty so when I go back there (Wednesday) I will uninstall it but maybe someone else have some ideas what may be happening. I doubt there's any virus or anything, symantec was installed right after setting everything up and running.

  Read the article

• Hard drive failed, suspected filesystem corruption, still cannot salvage any data from harddrive

  - by Hippy-Head

  Firstly, I am terribly sorry if this is a duplicate, but I couldn't find a similar issue to mine, so here goes. I have a 1TB hdd bought around 8 months ago used as backup hard drive. I have not used the drive for a period of time whatsoever, and when I was trying to get back to some files on it, it was completely wiped just like that. At first it would not boot I tried everything from command line chkdsk and filesystem recovery software to rebuilt it. After a few attempts I managed to initialize it, at that time it was an achievement. The problems started when I tried to recover the data inside, I have used A LOT of software free and commercial software on both Mac and Windows, with the help of cmd or Terminal commands, however no data of any kind was recovered, even after leaving it thoroughly scan for around 9-10 hours all night sometimes longer, with no results at all. I am somewhat desperate, I am usually good at retrieving data from corrupt hard drives, but this is not the case. Call me paranoid, but I do not want to give it to someone to fix it for me, as I have a lot of photos and personal stuff that I do not want anyone to see.

  Read the article

• needing storage integrity (write/read) test - for BASH

  - by Mr. Bash

  In need of shell scripts / bash commands to verify data integrity of local harddrives, usb-drives, etc, ... Like the famous www.heise.de/download/h2testw; or something that is at least common within repositories. (h2testw writes a specific datastring over and over onto the medium, then reads it again to verify if it was written correctly and displays write/read time/speed.) please no dd if=/dev/random of=/dev/sdx bs=1k && dd if=/dev/sdx of=/dev/null bs=1k since it won't verify if everything was written correctly. It is only a test if read/write is successful to the device. So far, I'm not too happy with badblocks -w -v /dev/sdx1 either, since it seems rather slow and I don't know what it exactly writes, and if it considers wear-leveling on flash media. There is also a program named F3 http://oss.digirati.com.br/f3/ that needs to be compiled. Designed after h2testw, the concept sounds interesting, i'd just rather have it as a ready to go bash script.

  Read the article

• Umount stale glusterfs partition

  - by Khaled

  I am using glusterfs on several Ubuntu servers: two of them are running glusterfs servers in replication mode. Without any clear error, the glusterfs partition became stale and the system shows this error when I try to access the stale partition: Transport endpoint is not connected Also, when running ls -l on the parent folder I get: d????????? ? ? ? ? ? myfolder I tried all types of commands that I can find to umount this partition, but I could not get it done: umount -l /path/to/mount/point umount -f /path/to/mount/point Also, using fuser command to show processes accessing this folder did not work. Unload the fuse kernel module can not be done as it is clear from the kernel config that fuse is built into the kernel and not a loadable module. I found this line in /boot/config-2.6.32-24-server CONFIG_FUSE_FS=y I have been left with two options: Reboot the system. Create another mount point like myfolder2 and mount this again using sudo glusterfs -f /etc/glustefs/glusterfs.vol /path/to/folder2. Of course, I have chosen to go with option 2. Anyone faced such an issue before? Anyone has a better solution for such a case?

  Read the article

• I get a Segmentation fault when doing apt-get util-linux

  - by Adam

  I've found that a lot of upgrade commands and Apache on my system are failing with Segmentation faults. I don't know if this is the main one, but a lot of packages depend on util-linux: root@myUbuntuHardyHeronServer:~# apt-get install util-linux Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: util-linux 1 upgraded, 0 newly installed, 0 to remove and 72 not upgraded. 20 not fully installed or removed. Need to get 0B/441kB of archives. After this operation, 0B of additional disk space will be used. (Reading database ... 20547 files and directories currently installed.) Preparing to replace util-linux 2.13.1-5ubuntu2 (using .../util-linux_2.13.1-5ub untu3.1_i386.deb) ... Unpacking replacement util-linux ... Segmentation fault dpkg: warning - old post-removal script returned error exit status 139 dpkg - trying script from the new package instead ... Segmentation fault dpkg: error processing /var/cache/apt/archives/util-linux_2.13.1-5ubuntu3.1_i386 .deb (--unpack): subprocess new post-removal script returned error exit status 139 Segmentation fault dpkg: error while cleaning up: subprocess post-removal script returned error exit status 139 Errors were encountered while processing: /var/cache/apt/archives/util-linux_2.13.1-5ubuntu3.1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Exporting Environment Variables in Ubuntu Linux

  - by stanigator

  I know many people have asked about environment variables before, but I am having a hard time dealing with these paths while ensuring I don't mess around with the original settings. How would you go about executing these commands in Ubuntu in terms of environment variables? Thanks in advance! Please put /home/stanley/Downloads/ns-allinone-2.34/bin:/home/stanley/Downloads/ns-allinone-2.34/tcl8.4.18/unix:/home/stanley/Downloads/ns-allinone-2.34/tk8.4.18/unix into your PATH environment; so that you'll be able to run itm/tclsh/wish/xgraph. IMPORTANT NOTICES: (1) You MUST put /home/stanley/Downloads/ns-allinone-2.34/otcl-1.13, /home/stanley/Downloads/ns-allinone-2.34/lib, into your LD_LIBRARY_PATH environment variable. If it complains about X libraries, add path to your X libraries into LD_LIBRARY_PATH. If you are using csh, you can set it like: setenv LD_LIBRARY_PATH If you are using sh, you can set it like: export LD_LIBRARY_PATH= (2) You MUST put /home/stanley/Downloads/ns-allinone-2.34/tcl8.4.18/library into your TCL_LIBRARY environmental variable. Otherwise ns/nam will complain during startup.

  Read the article

• PHP scripts randomly becoming really slow to respond - Database lockup?

  - by webnoob

  Hi All, I wasn't sure whether to post this here or on stackoverflow, so apologies if its in the wrong place. I have about 7 php scripts running on a centOS VPS. Each of these scripts contacts a game server and processes the logs, with the logs it either does some database queries or sends info back to the game server. I am having an issue where some of the scripts will randomly become REALLY slow to respond and I don't know where to start with my debugging. Each script connects to its own database schema but on the same MySQL server. Each script will do about 4 inserts per second and twice as many select statements on their respective databases. I thought a database lockup may cause the issue but some console messages that are read from the database are sent to the game servers console without issue every 30 seconds, even when the script is slow to responding to other commands. Non of the scripts are using a lot of memory or CPU power. About 0.1% each. I know this information is really vague but I don't know linux very well at all (in fact, top is about my limit) and I really don't know where to start debugging this. Thanks.

  Read the article

• Cannot log into Oracle Enterprise Manager 11g: ORA-28001

  - by Álvaro G. Vicario

  I can no longer log into Oracle Enterprise Manager 11g. I get this error message: ORA-28001: the password has expired (DBD ERROR: OCISessionBegin) I could log into the server using SQL*Plus. I warned me that the password was going to expire in 7 days (which is not the same as being already expired). Following advice from several documents, I ran these commands from SQL*Plus: ALTER USER sys IDENTIFIED BY new_password; ALTER USER system IDENTIFIED BY new_password; SQL*Plus no longer warns about passwords, but I still cannot use the Enterprise Manager. Then I followed this to remove password expiration: ALTER PROFILE default LIMIT password_life_time UNLIMITED And I've also restarted the Oracle services. In case it was using cached credentials, I've tried to connect from several browsers in several computers. No way: I still get ORA-28001 in Enterprise Manager. What am I missing? Update: Some more info SQL> select username,ACCOUNT_STATUS,EXPIRY_DATE from dba_users; USERNAME ACCOUNT_STATUS EXPIRY_D ------------------------------ -------------------------------- -------- MGMT_VIEW OPEN SYS OPEN SYSTEM OPEN

  Read the article

• Upgrading memory on an IBM Power 710 Express (8231-E2B)

  - by cairnz

  We have a Power 710 Express server that was loaded with 4x4 GB memory on a single riser card. I have replaced the 4 chips with 4x8GB and put in another riser card and loaded it with 4x8GB more for a total of 64GB memory. The firmware is AL730_078. When i power it on, the service processor boots up and i can access the ASMi. From here I can look at "Memory Serial Presence Data" and see that the system in some way detects 8x8 GB. However when i look at Hardware Deconfiguration and specifically Memory Deconfiguration, it is still listed with old values, 16384MB, and claims there are 4x4 chips in the C17 riser. How do i proceed to make the server recognize properly the amount of memory installed? I get a FSPSP04 and B181B50F progress code on booting because (i think) it hasn't been told the memory has changed. It then does not proceed to booting the operating system (VIOS) when turned on. Are there any steps I have overlooked here? Can I do some commands, either on the service processor, or otherwise, to tell the system to configure with the proper amount of memory? PS: This is a stand alone server, not configured with HMC or SDMC.

  Read the article

• Ubuntu Server: Networking fails with MODPROBE option in /etc/network/interfaces ... ??

  - by neezer

  For some reason (which I haven't been able to determine yet), yesterday morning the networking service on our web server (running Ubuntu 8.04.2 LTS -- hardy) wouldn't start, and our website went down. I noticed the following error message when trying to restart it: * Reconfiguring network interfaces... /etc/network/interfaces:6: option with empty value ifup: couldn't read interfaces file "/etc/network/interfaces" ...fail! Line 6 in the /etc/network/interfaces file concerned a MODPROBE command, which (I believe) loaded in the ip_conntrack_ftp module so that I could use PASV on my FTP server (vsftpd): (breaking modprobe commands commented out below) # Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or # /usr/share/doc/ifupdown/examples for more information. # The loopback network interface auto lo iface lo inet loopback #MODPROBE=/sbin/modprobe #$MODPROBE ip_conntrack_ftp pre-up iptables-restore < /etc/iptables.up.rules # The primary network interface # Uncomment this and configure after the system has booted for the first time auto eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask 255.255.255.0 gateway xxx.xxx.xxx.1 dns-nameservers xxx.xxx.xxx.4 xxx.xxx.xxx.5 I've verified that there is a file in /sbin called modprobe. Like I said earlier, this setup had been working flawlessly until yesterday morning (though my bosses say that the site actually went down the previous night at 11 PM EST). Can anyone shed some light on (A) why this broke, and (B) how can I re-enable the ip_conntrack_ftp module?

  Read the article

• Having trouble setting up my router

  - by indyK1ng

  I just moved into my apartment and the Internet connection is working. It's Comcast in case that matters. Anyway, I'm having trouble setting up my wireless router (Netgear WNR2000) to work with it. Are there any settings that I could be missing? I currently have it set up to use a static IP address and I found the DNS servers I'm supposed to use and the Internet light is green, but I can't get out to the Internet. When I am trying, I'm connecting to an Ethernet port on the back of my router. Is there a setting I'm missing or a setting that I have set wrong? I used the automatic set up wizard to learn that it's a static IP address. Any help would be appreciated. I am currently only able to use my Linux machine, so please make any help in Linux commands. Yes, I can connect to the Internet if I connect to the modem directly and I've been using the web interface when I'm connected to the router, so I suppose I can ping the router. My router detected the connection as using a static IP address, so I connected to the modem directly and figured out what my IP address, gateway, and mask were as well as DNS servers.

  Read the article

• How to remove all Couchdb versions in Ubuntu 10.04 (server)? ( after multiple installs )

  - by DjangoRocks

  Hi all, I have done multiple installs of CouchDB using sudo aptitude install couchdb sudo ap-get install couchdb and more recently based on the instructions found at L http://wiki.apache.org/couchdb/Installing_on_Ubuntu May I know how do I uninstall or remove all the above installations? Best Regards. +++++++++++++++++++UPDATE++++++++++++++++++++++++ I've tried running the following commands: apt-get remove couchdb apt-get purge couchdb but received the following errors: (Reading database ... 39814 files and directories currently installed.) Removing couchdb ... invoke-rc.d: initscript couchdb, action "stop" failed. dpkg: error processing couchdb (--remove): subprocess installed pre-removal script returned error exit status 1 invoke-rc.d: initscript couchdb, action "start" failed. dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: couchdb E: Sub-process /usr/bin/dpkg returned an error code (1) May I know how do i fix this? ON issuing the command : dpkg -l | grep couchdb I received the following response: rF couchdb 0.10.0-1ubuntu2 RESTful document oriented database, system D iF couchdb-bin 0.10.0-1ubuntu2 RESTful document oriented database, programs How do i uninstall CouchDB ? I think there's some file corruption?

  Read the article

• ssh key questions

  - by Tim

  I have some questions regarding generating keys for ssh access: (1) Supposed there are two computers running ssh server service and I have generated a pair of key files on computer A and copy the public file to computer B. Is it true that this is only a one-way key: We only gave computer A permission to access computer B, not gave computer B permission to access computer A? If I now want to ssh from computer B to computer A, must I generat another pair of key files on computer B and copy the public file to computer A? (2) If I would like to connect a single local computer to several remote servers, is it to generate a common pair of key files only once on the local and copy the same public file to the remote servers, or to generate different pair of key files on the local for different remote servers? (3) If I would like to connect several local computers to a single remote server, when copying the public files from different local computers to the remote server, is it to combine them together into a single authorized_keys file or store them in different authorized_keys files? (4) If there are several servers shared the same file system by, for example, NFS, how to generate keys and arrange the key files for accessing from one server to the other? Also how to still generate keys and arrange the key files for a local computer to access anyone of the servers? All the machines above are Linux.Please provide examples and commands in your reply so that I can better understand how to solve the problems. Thanks and regards!

  Read the article

• Mac OS X 10.8 VPN Server: Bypass VPN for LAN traffic (routing LAN traffic to secondary connection)

  - by Dan Robson

  I have somewhat of an odd setup for a VPN server with OS X Mountain Lion. It's essentially being used as a bridge to bypass my company's firewall to our extranet connection - certain things our team needs to do require unfettered access to the outside, and changing IT policies to allow traffic through the main firewall is just not an option. The extranet connection is provided through a Wireless-N router (let's call it Wi-Fi X). My Mac Mini server is configured with the connection to this router as the primary connection, thus unfettered access to the internet via the router. Connections to this device on the immediate subnet are possible through the LAN port, but outside the subnet things are less reliable. I was able to configure the VPN server to provide IP addresses to clients in the 192.168.11.150-192.168.11.200 range using both PPTP and L2TP, and I'm able to connect to the extranet through the VPN using the standard Mac OS X VPN client in System Preferences, however unsurprisingly, a local address (let's call it internal.company.com) returns nothing. I tried to bypass the limitation of the VPN Server by setting up Routes in the VPN settings. Our company uses 13.x.x.x for all internal traffic, instead of 10.x.x.x, so the routing table looked something like this: IP Address ---------- Subnet Mask ---------- Configuration 0.0.0.0 248.0.0.0 Private 8.0.0.0 252.0.0.0 Private 12.0.0.0 255.0.0.0 Private 13.0.0.0 255.0.0.0 Public 14.0.0.0 254.0.0.0 Private 16.0.0.0 240.0.0.0 Private 32.0.0.0 224.0.0.0 Private 64.0.0.0 192.0.0.0 Private 128.0.0.0 128.0.0.0 Private I was under the impression that if nothing was entered here, all traffic was routed through the VPN. With something entered, only traffic specifically marked to go through the VPN would go through the VPN, and all other traffic would be up to the client to access using its own default connection. This is why I had to specifically mark every subnet except 13.x.x.x as Private. My suspicion is that since I can't reach the VPN server from outside the local subnet, it's not making a connection to the main DNS server and thus can't be reached on the larger network. I'm thinking that entering hostnames like internal.company.com aren't kicked back to the client to resolve, because the server has no idea that the IP address falls in the public range, since I suspect (probably should ping test it but don't have access to it right now) that it can't reach the DNS server to find out anything about that hostname. It seems to me that all my options for resolving this all boil down to the same type of solution: Figure out how to reach the DNS with the secondary connection on the server. I'm thinking that if I'm able to do [something] to get my server to recognize that it should also check my local gateway (let's say Server IP == 13.100.100.50 and Gateway IP == 13.100.100.1). From there Gateway IP can tell me to go find DNS Server at 13.1.1.1 and give me information about my internal network. I'm very confused about this path -- really not sure if I'm even making sense. I thought about trying to do this client side, but that doesn't make sense either, since that would add time to each and every client side setup. Plus, it just seems more logical to solve it on the server - I could either get rid of my routing table altogether or keep it - I think the only difference would be that internal traffic would also go through the server - probably an unnecessary burden on it. Any help out there? Or am I in over my head? Forward proxy or transparent proxy is also an option for me, although I have no idea how to set either of those up. (I know, Google is my friend.)

  Read the article

• Compile PHP 5.3.2 with intl extension on Snow Leopard 10.6.3

  - by fsb

  Does anyone have some tips on compiling PHP's intl extension on PHP? I'm getting compile errors each way I try it and I've been googling for ages and getting nowhere. Any help greatly appreciated. When make gets to the huge gcc command to compile libphp5.bundle, I get the following error: Undefined symbols: "___gxx_personality_v0", referenced from: icu_4_2::MessageFormatAdapter::getArgTypeList(icu_4_2::MessageFormat const&, int&)in msgformat_helpers.o _umsg_parse_helper in msgformat_helpers.o _umsg_format_arg_count in msgformat_helpers.o _umsg_format_helper in msgformat_helpers.o CIE in msgformat_helpers.o ld: symbol(s) not found collect2: ld returned 1 exit status make: *** [libs/libphp5.bundle] Error 1 My compile commands are: MACOSX_DEPLOYMENT_TARGET=10.6 CFLAGS="-arch x86_64 -g -Os -pipe -no-cpp-precomp" CCFLAGS="-arch x86_64 -g -Os -pipe" CXXFLAGS="-arch x86_64 -g -Os -pipe" LDFLAGS="-arch x86_64 -bind_at_load" export CFLAGS CXXFLAGS LDFLAGS CCFLAGS MACOSX_DEPLOYMENT_TARGET ./configure --prefix=/usr \ --mandir=/usr/share/man \ --infodir=/usr/share/info \ --sysconfdir=/private/etc \ --with-apxs2=/usr/sbin/apxs \ --enable-cli \ --with-config-file-path=/etc \ --with-libxml-dir=/usr \ --with-openssl=/usr \ --with-zlib=/usr \ --with-bz2=/usr \ --with-curl=/usr \ --with-gd \ --with-jpeg-dir=/src/jpeg/jpeg-local \ --with-png-dir=/usr/X11R6 \ --with-freetype-dir=/usr/X11R6 \ --with-xpm-dir=/usr/X11R6 \ --with-ldap=/usr \ --with-ldap-sasl=/usr \ --enable-mbstring \ --enable-mbregex \ --with-mysql=mysqlnd \ --with-mysqli=mysqlnd \ --with-pdo-mysql=mysqlnd \ --with-mysql-sock=/var/mysql/mysql.sock \ --with-iodbc=/usr \ --enable-shmop \ --with-snmp=/usr \ --enable-soap \ --enable-sockets \ --enable-sysvmsg \ --enable-sysvsem \ --enable-sysvshm \ --with-xmlrpc \ --with-iconv-dir=/usr \ --with-xsl=/usr \ --with-pcre-regex=/src/pcre/pcre-local/usr/local \ --with-pcre-dir=/src/pcre/pcre-local/usr/local \ --with-icu-dir=/usr/local \ --enable-intl export EXTRA_CFLAGS="-lresolv" make

  Read the article

• DPM server 2010 Attach agent error : administrator privileges missing?

  - by Michael

  Hello, I’m hoping you would be able to help me out with this little problem I’m having. I installed DPM 2010 in our test environment to test backups on Exchange 2010 servers. The environment includes : 1xDC 2x Exchange Server 2010 1x DPM 2010 server All of these are running on Microsoft server 2008 R2 Virtual machines. The host machines are using Hyper-v. So the problem goes like this : 1- I tried to install the agents from the DPM server GUI, which failed saying I didn’t have the correct permissions. 2- So then I tried the manual installation using the commands from : the Microsoft site http://technet.microsoft.com/en-us/library/bb870935.aspx 3- The agent installation worked but when I get to attaching the agents to the DPM server it still gives me the error saying that the specified account does not have administrator rights. 4- I tried the Domain admin, users who are domain admin + local admin, single local admins. 5- I have turned off the windows firewall and made sure all the services are running. So now I’m out of ideas and really need help, the agent attach to the DPM server is the last thing that is holding me back from deploying everything to the production site. Any help would be really appreciated.

  Read the article

• PsExec and Remote Environment Variables, Logging, Etc.

  - by alharaka

  When I run PsExec on a remote computer, I always fall short of what I want. What I would like ideally in most situations is a) a log on an admin server where each individual log has the name of each the remote computer it was generated from (e.g. COMPNAME1.log, COMPNAME2.log, etc.) or b) a log file on each remote computer with whatever name I specify. When I try scenario (a), I use the following command. %SystemDrive%\path\to\psexec.exe @listofcomputers.txt -u DOMAIN\username cmd /c echo TEST >> \\server.company.tld\share\%computername%.log Problem is that it never works. All the computers just write to the log where %computername% is just the computer I execute PsExec from in my office. What I want are unique logs for each computer specific in the listofcomputers.txt that will correctly use the hostname from the remote environment variable without issue. Is that even possible? It does not seem to work for me. I tried this, and the syntax is clearly wrong. %SystemDrive%\path\to\psexec.exe @listofcomputers.txt -u DOMAIN\username "cmd /c echo TEST >> \\server.company.tld\share\%computername%.log" PsExec just fails saying the system file cannot be found (read: syntax fail). As for scenario (b), it appears to be a variation of a similar problem. When I run a command like this, it does not work. %SystemDrive%\path\to\psexec.exe @listofcomputers.txt -u DOMAIN\username "cmd /c echo %computername% >> \\server.company.tld\share\aggregated.log" Is there something I do not understand about remote path and environment variables with PsExec on the cmd.exe console (I have not even tried the dreaded PowerShell yet). I know such things work in a batch file (cmd /c \\server.company.tld\share\runthis.bat), but is there a reason it will not work when executing commands as arguments? I always need this, and can never get it!

  Read the article

• Server Bash Line Wrapping Over Text & In Wrong Place

  - by Pez Cuckow

  This is quite a hard problem to explain, when connecting to one of my servers using the bash shell, under any user the line wrapping is broken and has all sorts of problems. Once of which I detail in screenshots below: Other problems I experience include nano getting very confused about which line and or letter I am on, as shown by typing the same message into nano: These problems only occur when connecting as I previously mentioned to one of my servers which runs CentOs. Do you know why this is occurring and what I can do to fix it? On other servers the message works fine! Thanks for your time, Output of requested commands: Server that doesn't work properly: Working server: Could it perhaps be the custom prompt on the non working server? In .bashrc PS1='\e[1;32m\u@\h\e[m:\e[1;34m\w\e[m$ ' Commenting this out appeared to resolve the problem. Google says line wrapping errors can occur if you don't conform to these rules use the \[ escape to begin a sequence of non-printing characters, and the \] escape to signal the end of such a sequence I am not sure where this would fit in on my prompt?

  Read the article

• Bugzilla email issue

  - by xian

  My bugzilla system keep hit the following error: There was an error sending mail from '[email protected]' to '[email protected]':Can't send data I think that is some problem with my setting and configuration. First is the urlbase I have tried setting it to bugzilla.example.com, and http://127.0.0.1:81/, and http://10.0.0.236/ (My laptop IP address, I use this laptop to set up bugzilla) but the error still persists. Actually what should I put in the urlbase field? Parameter = Email Under mail_delivery_method, i choose SMTP. Under mailfrom, I put bugzilla-daemon. smtpserver, I tried leaving it blank, or setting it to 220.181.12.12 before, but could not solve my problem For my sql, the following is the data and command I used: C:\mysql\bin>mysql --user=root -p mysql Enter password: 1234 (When I install mysql into my laptop, it ask me to key an username and password, i have key in username as 'cvuser' and password as '1234', but here never ask me to key in any username) Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 1 Server version: 5.5.15 MySQL Community Server (GPL) mysql> GRANT ALL PRIVILEGES ON bugs.* TO 'bugs'@'localhost' IDENTIFIED BY '123456'; Query OK, 0 rows affected (0.03 sec) In C:\Bugzilla\localconfig, I put the following info: # # How to access the SQL database: # $db_host = "localhost"; # where is the database? $db_port = 3306; # which port to use $db_name = "bugs"; # name of the MySQL database $db_user = "bugs"; # user to attach to the MySQL database # # Enter your database password here. It's normally advisable to specify # a password for your bugzilla database user. # If you use apostrophe (') or a backslash (\) in your password, you'll # need to escape it by preceding it with a \ character. (\') or (\\) # $db_pass = '123456'; Can someone tell me where my mistake is? I have googled for this issue for few days but still cannot find the solution.

  Read the article

• 554 5.7.1 <mail_addr>: Relay access denied centos postfix

  - by Relicset

  I have problem in send mail from postfix in centos I have following setup mail server postfix for sending mail but I am getting error. As in the link I tried following commands telnet localhost smtp Trying ::1... Connected to localhost. Escape character is '^]'. 220 mydomain.com ESMTP Postfix ehlo localhost 250-mydomain.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN mail from:<domain.com> 250 2.1.0 Ok rcpt to:<[email protected]> 554 5.7.1 <[email protected]>: Relay access denied Edit-1 In terminal this works echo TEST | mail -v -s "Test mail" [email protected] my postconf -n shows belog information alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 home_mailbox = Maildir/ html_directory = no inet_interfaces = localhost inet_protocols = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = dummy.com myhostname = dummy.com mynetworks = all mynetworks_style = host myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550 What configuration I have to perform to send mails from my server.

  Read the article

• VoIP setup for one external PSTN line

  - by Jcl

  I'm completely new to VoIP and the likes, and I'm trying to find information about what could be the best setup for this. I need 4 (maybe more in the future, but maximum 5 or 6) wireless extensions, connected to 1 PSTN line, and maybe 2 in the future. I've been trying to gather information about the gear needed but everything I find seems too much over-the-top (and extremely expensive). The main problem is that the physical place we are on doesn't have possibilities of having a decent internet connection, so using a external VoIP "virtual PBX" is not an option. Thing is, even if small, phone is critical to this organization. I currently have an analog DECT/GAP PBX which does what I need, however the PBX is very bad and the call quality is horrible, and that's why I want to change it. The requirements would be: 4 wireless terminals (routing cable is not an option), all of them ringing on incoming PSTN calls. Ability to do internal calls (4 separate offices) and ability to pass calls between terminals. The 4 terminals should be able to access the external PSTN line without dialing any special codes. Very important: terminals should be able to issue commands on the PSTN line to the external operator in the form *nn*nnnnnnnn# . Don't know wether this could face to be a problem, but I've had problems with analog PBX which would take any * as a PBX command and wouldn't allow terminals to send it to the external lines. Not so important, but would be nice to have: call waiting music Could anyone recommend such a setup? I need to be able to do this on a EXTREMELY LIMITED budget (that is: I don't have a limit, but all should get as much to zero as possible). I have enough spare powerful computers and a 300mbps wireless network which works just fine, so that's not to include in the budget. Don't really know if this is the best place to ask, but it's the most StackExchange-related site I've found to this subject.

  Read the article

• Why can't Logman start?

  - by Bill Paetzke

  I'm setting up my first logman counter. But it's not working! There is some file or folder permissions problem. Or maybe I wrote the create-counter statement wrong. Here's my counter commands: logman create counter BillTest -si 30 -v nnnnnn -max 200 -o "C:\Temp" -c "\Processor(*)\*" "\Memory(*)\*" "\LogicalDisk(*)\*" logman start BillTest The first command works. It says counter creation successful. The second command fails: Collection "BillTest" did not start, check the application event log for any errors Here's the error in the Event Viewer: The service was unable to open the log file C:\Temp_000001.blg for log BillTest and will be stopped. Check the log folder for existence, spelling, permissions, and ensure that no other logs or applications are writing to this log file. You can reenter the log file name using the configuration program. This log will not be started. The error returned is: Access is denied. I verified that C:\Temp exists. I'm not a permissions guru, but I did set all the accounts in the security tab of that folder to "full control." Still, the logman start command failed with the same error. I noticed that it was trying to write to C:\Temp_000001.blg instead of C:\Temp\000001.blg. That might be part of the problem. So, I tried to update my counter to "C:\Temp\" instead of "C:\Temp", but that failed with a path-invalid error. Also, all the examples I saw online used did not put a trailing slash. So, no dice there. I tried this on my machine (Windows XP) and my dev server (Windows Server 2003). Both failed with the same error. How can I fix this?

  Read the article

• Run command remotely on Windows computer

  - by Bilal Aslam

  I have a Windows Server 2008 instance on Amazon EC2 (Amazon's cloud compute platform, which provides VMs in the cloud). It has an external IP, and I have an admin account on the box. I would like to 'bootstrap' this instance remotely i.e. I want to run commands to download, install and configure apps on it, all without having to log on even once. Also, I cannot use psexec on the source computer. I have figured out how to do this to a remote, domain-joined computer using WMI. However, I have NOT been able to do for a remote computer on EC2. Here are some specific restrictions: The remote computer is not part of my domain, hence no Kerberos The remote computer does not have a cert I trust, or vice versa I am sure I am running into to some auth/trust restriction. Is there any way I can run a single command on the remote, given that I have admin privileges? I'm not tied down to using WMI, but I do need to run a command somehow. Feels like this should be a solved problem.

  Read the article

• Drive Mapped On Amazon EC2 Instance Startup Disconnected After Logon

  - by jsn

  I am launching an Amazon EC2 instance (Windows Server 2012), and on startup (though User Data field), it runs this powershell script: <powershell> NET CONFIG SERVER /AUTODISCONNECT:-1 # clear all prior connections net use * /delete /y > C:\delLog.txt 2>&1 # mount new drive net use R: \\dbHost\share /user:username pass /persistent:yes > C:\useLog.txt 2>&1 ipconfig /all > C:\ipLog.txt </powershell> When it launches and I connect to it through RDP, it shows in explorer "Diconnected Network Drive (R:). If I double click it, error message displays "R:\ is not accesible. Access id denied". Normally, it would ask me for credentials to reconnect. I need for this drive to be connected through the duration of the instance. delLog.txt contents: You have these remote connections: T: \\dbHost\share Continuing will cancel the connections. The command completed successfully. useLog.txt contents: The command completed successfully. ipLog.txt contents as expected. The net use commands works fine by itself, it connects. Anyone have any idea what could be wrong? There is only one account on these machines - Administrator. It is a samba share to a Linux server on a private network.

  Read the article

• Windows 7 machine, can't connect remotely until after ping

  - by rjohnston

  I have a Windows 7 (Home Premium) machine that doubles as a media centre and subversion server. There's a couple of problems with this setup, when connecting to the server from an XP (SP3) machine: Firstly, the machine won't respond to it's machine name until after it's IP address has been pinged. Here's an example: Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Rob>ping damascus Ping request could not find host damascus. Please check the name and try again. C:\Documents and Settings\Rob>ping 192.168.1.17 Pinging 192.168.1.17 with 32 bytes of data: Reply from 192.168.1.17: bytes=32 time=2ms TTL=128 ... Ping statistics for 192.168.1.17: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 2ms, Average = 1ms C:\Documents and Settings\Rob>ping damascus Pinging damascus [192.168.1.17] with 32 bytes of data: Reply from 192.168.1.17: bytes=32 time<1ms TTL=128 .... Ping statistics for 192.168.1.17: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 1ms, Average = 0ms C:\Documents and Settings\Rob> Likewise, subversion commands with either the machine name or IP address will fail until the machine's IP address is pinged. Occasionally, the machine won't respond to pings on it's IP address, it'll just come back with "Request timed out". The svn server is VisualSVN, if that helps... Any ideas?

  Read the article

< Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >