Search Results

Search found 5878 results on 236 pages for 'sim card'.

Page 175/236 | < Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >

• Is there a fix for an iMac G5 annoying screen pattern issue?

  - by smountcastle

  It's probably a hardware issue, but I was hoping that someone might know of other options to try. My iMac G5 (the revision just before the built-in iSight was introduced) has developed an annoying pattern of short/wide rectangles in a pinkish hue across the screen. I've followed Apple's instructions to ensure that the logic board hasn't failed (by resetting the SMU and watching the internal LEDs light-up). I suspect either the LCD or video card has failed. Below are two screen shots, one taken by my iPhone which exhibits the problem and a snapshot taking from the faulty iMac which looks fine.

  Read the article

• Register a domain with NIC

  - by tandu

  I recently bought a .es domain for the purpose of creating a domain hack. I registered the domain with esreg.com (SANE Systems, apparently). My card was charged, but the domain is listed as not registered. I have not yet been able to get in contact with them. Their website seems to have a small form to register the site and to specify the nameservers, but when I fill it out it says "You have to specify the NIC handles first." I don't know how to get those. They have for example a box that says "Owner" with an example of SK86-ESNIC-F4. I have another website so I may have this information, but I don't know how to get it.

  Read the article

• Asus V1S screen dimming randomly

  - by Bill

  I have an Asus V1V, which is the same as the Asus V1S except for the video card. I have a problem where the screen will randomly lose brightness or flicker between being lit and not lit. The picture below is of the left hinge, with the cover removed. Pressing one of these cables affects this behaviour, and pressing it in place will resolve the issue for a few hours. My guess means the inverter cable is damaged, based on previous experience. As the picture shows, there are two cables, an LCD cable and what I assume is an inverter cable. I purchased an LCD cable for my model of laptop, but have been unable to find an inverter cable. It seems not to exist. I would like some input on if an inverter cable actually exists, if it is likely the problem, or solutions in general to resolve this problem permanently.

  Read the article

• Zentyal Server : Setting up secure VPN Client

  - by JustShrey

  I have officially exhausted pretty much all my google-fu trying to set this up so I'm asking my question here. For the record, I am a mid level rookie who has played around with servers in his spare time but have never worked with Zentyal Server. Now, I have been able to set up the server as a gateway, with one Network card being external and the other facing the internal Network. The Internal network computers are able to access the internet without any issues. What I need to do is to setup a open-vpn client on the central server so that all Internet data goes though the secure VPN session. As far as I can see, I can't set up the vpn session through the web admin page. Could somebody point me in the right direction? How would I go about doing this? Regards Shreyas

  Read the article

• Nvidia driver on Windows 7 causing black screen

  - by inKit

  I have just installed Windows 7 on a desktop machine and for the first time ever have had a really tough time doing so, its normally a nice smooth install. This time I found that the monitor would simply go black after completing the installation. I tried reinstalling about 3 times and this did not help. After much searching I discovered that it was the nvidia drivers that were playing up with win 7, so i booted into safe mode, disabled the device, then rebooted to complete the installation. Windows 7 now works fine as long as the nvidia 9600 gt video card is disabled. The moment I enable it, the system requires a reboot and the screen will go black before even getting to the log in screen. I have tried downloading the latest driver and installing it manually, I have also tried uninstalling the device and allowing windows 7 to install it itself. Nothing seems to work. any clues?

  Read the article

• Ubuntu Wired network(ethernet does not work)

  - by badnaam

  It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet. Here are the details from route, iptables, ifconfig, ping etc. Any ideas? I have been struggling with this for day, none seems to have an answer. http://pastie.org/954816

  Read the article

• Windows 7 - all usb devices go to sleep im idle mode

  - by dvdx

  A strange thing happened after a few updates to the system: Intel rapid storage SSD firmware update Intel Ethernet adapter update GPU Intel update When the computer turns off the screen (after 5 min), an unknown time later, all the USB devices stop working. Sound card Mouse Keybord etc. I can't turn them back on, so I can't wake up the screen or do anything except turn the computer off and back on. I checked my power save profile and all is OK there. I changed in the Device Manager, the Allow USB to sleep in all the hubs. How can I fix this??

  Read the article

• Clarification of the difference between PCI memory addressing and I/O addressing?

  - by KevinM

  Could someone please clarify the difference between memory and I/O addresses on the PCI/PCIe bus? I understand that I/O addresses are 32-bit, limited to the range 0 to 4GB, and do not map onto system memory (RAM), and that memory addresses are either 32-bit or 64-bit. I get the impression that memory addressing must map onto available RAM, is this true? That if a PCI device wishes to transfer data to a memory address, that address must exist in actual system RAM (and is allocated during PCI configuration) and not virtual memory. So if a PCI device only needs to transfer a small amount of data at a time, where there is no advantage to putting it into RAM or using DMA, then I/O addressing is fine (e.g. a parallel port implemented on a PCI card). And why do I keep reading that PCI/PCIe I/O addressing is being deprecated in favour of memory addressing? Thanks!

  Read the article

• PCI IDE Controller

  - by mercutio

  I have a suspicion that the onboard IDE controllers may not be working. Every disk I use to setup this machine reports as damaged (using a win xp installation to test, since it gets to partition setup fastest) So, I popped an IDE PCI Controller card in, to test with, but no drives are showing up in the bios now. I went into setup and changed the BIOS settings to disable onboard IDE1 and 2 to test, but still didn't detect the drives. How do I get that working? It's a standard PC with a 160GB disk and DVD Drive on master and slave channels on a single cable, if that helps. Let me know what else I need to state.

  Read the article

• Has anyone seen an HTTP 500 error when HTTPS traffic going through Pound Proxy forwards to an HTTP page?

  - by scientastic

  We have Varnish as our load balancer and reverse proxy cache for normal HTTP traffic. For HTTPS traffic, we use Pound proxy to unwrap the SSL and forward to Varnish, which then forwards to the back-end servers. This is used for our "checkout" process to encrypt credit card info in transition. However, on the last stage of checkout, users are always getting an HTTP 500 (Internal Server) error. It doesn't seem to be due to our back-end app server, by all tests I've tried. Does anyone know anything about how that transition works-- the transition back from HTTPS to HTTP and the interaction between Pound and Varnish-- and why it might cause 500 errors?

  Read the article

• Running Ubuntu off a USB drive?

  - by Solignis

  I was wondering if a USB 2.0 Thumb drive has enough bandwidth to act as a primary system drive in an Ubuntu Linux server. More specifically an SAN server. I am running an iSCSI target, ZFS and NFS-kernel-server, BIND9 (Slave), and Openldap (Slave). I was thinking of resorting to a thumb drive because my new motherboard only has 4 SATA ports and I have 5 disks. 4 (ZFS Pool) 1 (System). And unless I get an expansion card there is no way to get more SATA ports. This "server" leans more twords a home server. I use in my lab with my VMware server. It provides storage, or atleast it did until it died. Would it still be better to go with the SATA hard disk?

  Read the article

• Extract X11 configuration information from running instance.

  - by kasterma

  Since I had a hard disk die on me, I figured I could easily try some other OS (I usually run Ubuntu). Turns out that Ubuntu flawlessly recognizes my video card and monitor (X11 works right out of the box), and none of the other systems I tried gets anything working (I tried CentOS and FreeBSD). In my now working version of Ubuntu I cannot find a configuration file with information I could try to use with one of the other versions, which makes me guess that it just detects the hardware every time. Can I extract its choice for drivers and configuration options somehow (so I can try these same options in the other systems)?

  Read the article

• Third monitor randomly defaults to 640 x 480 on startup

  - by ajbdev

  I purchased a PowerColor HD 5770 video card so I could get a third monitor working. I have two widescreen monitors, one attached via HDMI and the other attached via DVI. My third monitor is attached from DisplayPort to VGA (using a passive connector like this one) The third monitor is a 19" Hyundai L90D. I was unable to find any Windows 7 (or Vista for that matter) drivers for the monitor, so it's stuck with "Generic Non-PNP Monitor". It's native resolution is 1280 x 1024. Randomly Windows will boot up in the correct native res, but sometimes it boots up in 640 x 480 res. When it does boot up into 640 x 480 res, the screen resolution slider is stuck and I cannot slide it back to 1280 x 1024. I cannot find a pattern for when or why it will do this, I've tried rebooting five or six times in a row at times to get it to boot into native res, but this doesn't always work.

  Read the article

• Encrypted directory makes file operations for whole disk very slow

  - by user1566277

  I am running an arm GNU/Linux and I have a SD-Card with three partitions on it. On one of the Partition I create an encfs file and then mount it on a directory which is in another partition to make that directory encrypted. Works fine. But now the writing speed on all the partitions are reduced drastically. I can understand that it should be slow for encrypted directory but why the its reducing write speed for all the partitions. E.g., if do not mount the encrypted directory 20MB is transferred in 2 Sec. roughly but with the encrypted directory mounted its like 20 Seconds for same file. I am using LUKS and all the partitons are ext3 except for the directory where /dev/mapper/encfs is mounted as type ext2. Any hints?

  Read the article

• Kvpn on ubuntu 11.10 is stuck on 'Connecting'

  - by xupv5

  I recently installed open-vpn and it's gui, Kvpn, on my ubuntu system but after I load the configuration file and click 'Connect' it just runs through and gets stuck on 'Connecting', never actually getting connected. How do i get around this or what might i be doing wrong? The profile was set up using a .conf file and the network i'm trying to connect to needs only a username and password. I'm on a wi-fi connection, with one network card(also behind a university firewall, i suppose). Any help regarding connecting to a vpn on ubuntu would be much appreciated. Thanks!

  Read the article

• Why are browsers so heavy?

  - by Kaivosukeltaja

  Back in 1998 I had a computer with 233MHz Pentium MMX CPU and a GFX card with no 3D acceleration. It was able to run games like Quake II at a decent FPS rate. My current computer has tons more performance and a mid-class GPU, yet struggles to reach 20 FPS when rendering a single model inside a skybox with WebGL. Even regular pages with lots of 2D CSS animations bring many modern computers to their metaphorical knees. As a web developer I understand there's a lot going on in a web page but not what makes it that heavy. Modern browsers compile JavaScript to CPU native machine code before running it and rendering into a canvas element shouldn't trigger DOM rebuilds so theoretically it should be a lot faster than it is. What am I missing here and is it possible to avoid or minimize whatever is making the browsers slow to build more efficient websites?

  Read the article

• Laptop monitor being very dark, no backlight?

  - by ldigas

  I'm asking for a diagnose of what is probably the problem. Here goes ... laptop monitor (hp 6715s) went dark. I'm using also an external monitor with the laptop, and since it kept its picture, I'm guessing it's not the graphics card. When the night came, and I turned on my desk lamp, I noticed that the laptop monitor is not really not showing anything, but is actually showing my desktop picture - only it's very very very dark. You cannot see anything on it, unless the lamp is focused on it, then you can see the picture, only very dark. Does anybody have any clue what it could be? I'm just looking for informed guessed here, so I have at least some idea of where the problem lies. The closest repair shop is quite some distance away, so going for a bit of self-diagnose before thinking of taking it to them.

  Read the article

• how to disable to automatic wireless interface up in ubuntu? [closed]

  - by Surjya Narayana Padhi

  On my laptop I have a built in wireless card and I got one external connected via usb. By ifconfig command I saw both the cards connects to internet and gets IP. eth1 - the interface my laptop has in-built wlan1 - I have connected externally via usb. Now I applied "sudo ifconfig eth1 down" so that i can use only wlan1. But this eth1 goes down for sometime and then come up again automatically. So I am not able to test my externally usb connected wifi adapter. Can anyone suggest me way to disable eth1 interface?

  Read the article

• Nvidia driver on Windows 7 causing black screen

  - by inKit

  I have just installed Windows 7 on a desktop machine and for the first time ever have had a really tough time doing so, its normally a nice smooth install. This time I found that the monitor would simply go black after completing the installation. I tried reinstalling about 3 times and this did not help. After much searching I discovered that it was the nvidia drivers that were playing up with win 7, so i booted into safe mode, disabled the device, then rebooted to complete the installation. Windows 7 now works fine as long as the nvidia 9600 gt video card is disabled. The moment I enable it, the system requires a reboot and the screen will go black before even getting to the log in screen. I have tried downloading the latest driver and installing it manually, I have also tried uninstalling the device and allowing windows 7 to install it itself. Nothing seems to work. any clues?

  Read the article

• Is the quadro 4000 still worth it's price? [closed]

  - by aknewhope

  I am going to be purchasing a quadro graphics card for learning 3d CAD at work. It's not critical I have it right now otherwise I would just buy the current 4000 (PC). I am buying this with my own money and am concerned Nvidia will release a new Quadro 4000 sometime in the near months. Is the current 4000 still worth it's price tag at $700.00? If i were to purchase it, how long would it be useful? I am going to be running E-PLAN, SOLIDWORKS, DRAFTSIGHT, MASTERCAM. My computer is a second generation i7-2600k with z68 chipset (intel DZ68BC mobo).

  Read the article

• Windows 7 cannot connect wirelessly to Netgear Router WPN824 V2

  - by edo152

  I have a new HP Laptop running Win 7 Home Premium with an Atheros Wireless card. I have a Negear WPN824 V2 Rangemax Router. The router works with a wired connection. Wirelessly it can see the network but it cannot connect. I have searched the web and the WPN824 seems to work for some people, but I cannot get it to connect. I have tried disabling Bonjour Service and a few other things but it continues not to connect. Am I probably correct to assume that the WPN824 is somehow incompatible with Wiondows 7? or am I missing some simple change I should make?

  Read the article

• My wireless network slows down every 7.5 minutes when my desktop is switched on

  - by Dog Ears

  My network has lag spikes lasting for a few seconds every 7.5 mins. The spikes also effect any other computer connected connected to my wirless router at the time. My wife has to connect her laptop via a cable to prevent the lag causing problems when she's VPNing into her work. If I switch my PC off the problem goes away! I've got an Edimax 7728ln 802.11n wireless card and Speedtouch 585v7 (I'm with Be) I've Tried... Updated the drivers from Edimax website: 2.0.3.0 (it does say 3.0.2.0 in devices properties though) WLAN Optimizer doesn't seem to be helping What can I do?

  Read the article

• Can I create an Infrastructure access point from built-in WiFi (as opposed to Ad-Hoc) on Windows XP?

  - by evilspoons

  I want to use my Windows XP laptop as an access point. What I am trying to achieve is possible under Windows 7 with a myriad of utilities, but the wireless driver stack was different before Windows 7 and those specific APIs don't exist on XP. The reason behind me wanting to do this is that I would like my Android phone to be able to connect via WiFi to a network that is only hard-wired (reverse tethering). Unfortunately, my Android device (Galaxy S Captivate) does not support ad-hoc networks without a serious amount of screwing around. Is it possible to create an "Infrastructure" network with my Dell Latitude D830's built-in WiFi - a "Dell Wireless 1395 WLAN Card", which I am assuming is probably rebadged Broadcom, or is there some fundamental difference between a wireless adapter and an access point that would prevent this?

  Read the article

• Why does using 2 memory sticks cause my computer to crash?

  - by hi

  My computer randomly crashes when playing games, but if I remove one memory stick (it does not matter which one I remove), it does not crash anymore. Memory tests do not find errors, I just put in a new power supply (650W), I only have 1 graphics card, so why is this happening? BTW, they are the same memory, same vendor same specs, everything I bought it together (2x2GB) My motherboard is a Asus P5Q Pro, so it supports both dual channel and more than 4gb. Switching slots does nothing, as long as I don't use more than 1 I'm fine.

  Read the article

• Random BSOD ntoskrnl.exe (Windows 7)

  - by nordbjerg

  I get BSOD at random times and have been for a while now on my Windows 7 machine. It is really new, and I already tried wiping the graphic card drivers and installing them again (making sure that they are of course up to date). I get a variety of bug check strings on a few different drivers. The single file that is in all of my BSODs is ntoskrnl.exe Bug Check Strings - SYSTEM_SERVICE_EXCEPTION - KMODE_EXCEPTION_NOT_HANDLED - DRIVER_IRQL_NOT_LESS_OR_EQUAL - SYSTEM_THREAD_EXCEPTION_NOT_HANDLED - PAGE_FAULT_IN_NONPAGED_AREA I would rather not resort to getting a completely new PC, as I have already thrown a lot of money on my current one. Here is a .zip file with my dumps.

  Read the article

< Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >