Search Results

Search found 17187 results on 688 pages for 'vpn connection'.

Page 175/688 | < Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >

  • Bring internet connection to ssh target machine via tunnel?

    - by Calvin
    I have a CentOS 5 machine deep inside firewalls that's only reachable via ssh on an unconventional port, let's say 98765. I normally connect to this machine like this: ssh -P 98765 user@ip -L5900:localhost:5900 I need to run yum to install some packages on this machine, but it's not possible since the outbound ports are all closed on this machine. I want to do something like this to "bring my internet connection" to this machine: ssh -P 98765 user@ip -L5900:localhost:5900 -R80:localhost:80 -R21:localhost:21 My intention is that, when I run yum on the machine, yum will use port 80 and 21 through my originating machine. Is something like this even possible?

    Read the article

  • Can I setup a link SQL server connection between servers on different networks?

    - by Glenn Slaven
    We have a production SQL server hosted offsite at a hosting company, and we have a staging environment within our own network. We want to be able to setup a SQL job that copies content from a table on the staging server to prod on a regular basis, and I think we need to setup a linked server connection to do this. What do I need to get the hosting company to do to allow us to set this up? We have RDP access to the production servers, I just need to know what network and security configurations need to happen from the hosting company's perspective so I can ask them to do it.

    Read the article

  • The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete

    - by Mahmoud Saleh
    i have configured exchange server 2010 on windows server 2008 and my email server is: mail.centors.com and my user account is [email protected] when i tried to configure outlook 2010 to add this exchange account following the tutorial here: http://support.itsolutionsnow.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=153 i am getting the error: The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete i restarted the service microsoft exchange attendant services but still keeps getting same error. please advise how to fix this issue with little details since i am a developer not a system admin.

    Read the article

  • Problems connecting Centos on VMware player to the network using bridged connection.

    - by Sakin
    Hi, I installed CentOs on VMware Player 3.0.1 running on windows XP. When trying to configure it to connect to the internet in a bridged configuration, I get an error message when trying to bring up the network interface: [root@VMLinux ~]# /et/init.d/network start Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed [FAILED] VM is running on a machine that has access to the network, I tried it on two different networks that have DHCP enabled. Everything works fine when using a NAT connection through my host. How can I make the bridge work for me? Thanks.

    Read the article

  • Exchange 2010 periodically stops responding to SMTP events with error 421 4.4.1 Connection timed out

    - by Michael Shimmins
    After some help diagnosing why Exchange 2010 Enterprise stops responding to SMTP events. I can't find a pattern to it. It doesn't appear to be an actual timeout, as the server responds immediately with the error. To reproduce it I telnet into the server on port 25 and issue a EHLO. The server immediately replies with the 421: 421 4.4.1 Connection timed out Once this starts happening I've found restarting the exchange box is the only reliable way to get it flowing again. Sometimes restarting the Transport service or the mailbox attendant service seems to fix it, but this could be coincidental as it often has no effect.

    Read the article

  • Would a Socket Connection Outperform an Intarvaled Database Sweep and Requests?

    - by Jascha
    I'm building a small chat application to add to an existing framework. There will only be 20-50 users MAX at any one time. I was wondering if I could get away with updating a cache file containing (semi) live chat data for whichever users happen to be chatting just by performing timed queries and regular AJAX refreshes for new data as opposed to learning how to open and maintain a socket connection. I'm sure there are existing chat plug-ins out there. But I just had a hell of a time installing one and I could see building the whole damn thing taking just as much time as plugging one in. Am I off to a bad start? Thanks in advance -J (p.s. this is a semi closed network behind a php login so security isn't a great concern)

    Read the article

  • Encrypt connection between apache web server and mysql server.

    - by microchasm
    I'm setting up a local webapp. I have a CentOS-5 box that will be the webserver (Apache 2.2). I have another box (RHEL5) that will be used only for MySQL. The data will be encrypted on the webserver via PHP before being sent to the MySQL box and inserted into the db. All web-based connections to the webserver will be encrypted via SSL. From the research I've done, it's not totally clear on whether or not there is a need to encrypt the connection to the db from webserver (NB paranoia level: Orange). If it is not overkill, or even if it is (unless it is a really bad idea for some reason), any advice or pointers on the direction to take to get this done would be appreciated.

    Read the article

  • Run a local command after closing an SSH connection?

    - by James B
    I've set up my zsh to update the XTerm title whenever I change directories. It's neat! Unfortunately I have one common problem, which is this: % cd foo; # title changes to "host1:~/foo" % ssh host2; # title changes to "host2:~" % pwd /home/user/foo # title is still "host2:~" I need to run some command anytime an ssh connection terminates, either chpwd, or cd ., or something similar. I don't think I can use an alias, because I'd need something like alias ssh=ssh $*; cd . but AFAICT you can't pick where the arguments go in an alias.

    Read the article

  • How do I tell if my firewire connection is running as 400 or 800?

    - by Tom
    I have a MacBook Pro with FireWire 800 and a freecom external harddrive that has USB3, FireWire 400 and 800. I am using a Nikkai FireWire 800 cable that has 800 connector on one end and a 400 connector on the other end. The 800 connector is attached to the MacBook pro and the 400 connector is attached to the freecom drive. Is there any way to tell what connection has been established? I looked at disk utility and it simply said 'FireWire'. Is there a command-line tool that would give more information? If it's 400, I plan to swap the cable for 800 connector at both ends.

    Read the article

  • Problems connecting Centos on VMware to the network using bridged connection.

    - by Sakin
    Hi, I installed CentOs on VMware running on windows XP. When trying to configure it to connect to the internet in a bridged configuration, I get an error message when trying to bring up the network interface: [root@VMLinux ~]# /et/init.d/network start Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed [FAILED] VM is running on a machine that has access to the network, I tried it on two different networks that have DHCP enabled. Everything works fine when using a NAT connection through my host. How can I make the bridge work for me? Thanks.

    Read the article

  • How do I get a 300Mbps connection over 802.11n?

    - by Daniel Schaffer
    I just bought a new wireless setup, consisting of a Cisco E2000 router, Edimax 7718un USB adapter for my laptop and an Edimax 7728in PCI adapter for my HTPC (which isn't in a location I can run cat5 to). I have to stay in the 2.4GHz band because I have an iPhone and a Wii that will need to connect. I'm aware that 11g devices will drop speeds for 11n devices, but they aren't connected yet. The fastest connection I've been able to get, with the router within 5 feet of either the laptop or HTPC is 144Mbps. The router has settings for "20MHz" and "Auto (20 MHz or 40Mhz) channel width, which I've set to the "Auto" setting. I haven't been able to find anything similar for either of the Edimax adapters. This is the first I've dealt with 11n, so I'm not even sure what else could be causing a problem. How do I get up to 300Mbps, or at least a fair bit closer?

    Read the article

  • How do I split an internet connection into 4 equal connections?

    - by luis velasco
    My 4 roomates and I have a problem: One of my roomies is downloading torrents all the time. When somebody need make a call or doing something like you tube or a quiz using the internet conection. The internet is very slow.... I can not create a network using a computer as a proxy. I just need a good router (and in the budget no more than $50).. I just want to split a 16MB connection into a separated 4 x 4 mb (theoretically)..

    Read the article

  • Why does Pages.app connect to a server through https and keep the connection open?

    - by ggustafsson
    Every time i start up the program Pages (iWork) it connects to a server through https. What is going on? Why would Apple do this? I use no features under Pages that could warrant this behaviour. It connects to IP address 2.22.240.224 on port 443 and keeps the connection open until i close the application. All the info i can get from Wireshark is a bunch of Apple-related domain names. Edit: The same thing happens with Numbers. I have disabled "Documents & Data" on iCloud so that shouldn't be the reason why. Edit 2: The programs in the iWork suite stopped doing this after recent updates so it's not an issue anymore.

    Read the article

  • DD-WRT Router Can't hold a connection after initial setup...

    - by AC
    Struggeling with my new DDWRT router (Buffalo WZR-HP-G300NH) configuration. I configured it using one machine while comparing the settings on my existing Linksys WRT54GL on another machine. To the best of my knowledge, I've set it up the same way as my Linksys, but DDWRT has so many other options. After configuring it, I plugged it into the modem, VOIP device & my network. I see the phones come back online. However after a few minutes, it seems I lose the outbound connection (phones die and I can't get out over HTTP). What's confusing me is it works for a few minutes, then it fails. No idea what to look for. Ideas?

    Read the article

  • Why are my downloads up to ~1500KByte/sec only, when the ADSL connection locks at 13611Kbit/s?

    - by leladax
    No uploading is going on other than the overhead of downloading which appears to be not high for the abilities of the connection: Only about 30-40KByte/s when the router locks at 1012Kb/s and other direct uploads or uploading overheads can reach more than 100KByte/sec so I don't think it's a congestion at uploading that is doing it. Is there something I miss? Because I assume 13611Kbit/s should be ~1701Kbyte/sec. Is it an overheard at the ADSL level I don't understand? Could it be the ISP doing it? If it's active throttling it can't be on single connections since 2 high speed connections still go up to ~1500KByte/sec. It's not an example on torrents or other complex situations. The tests were on Ethernet, but I doubt the results would be different on wireless. I wonder if the settings of those connections at my end could be doing it, e.g. MTU settings, though I haven't touched the defaults of a common Realtek NIC.

    Read the article

  • Why do some machines respond with many RST packets instead of RST-ACK to refuse a connection?

    - by Michael J. Gray
    I have recently been trying to track down a problem with one of our systems and have noticed that it is simply not allowed to connect to a remote machine. However, the remote machine (not controlled by us) is responding to our request for a connection with many TCP RST packets on a different port (26469, 26497, 26498) than the one we originated on (53). It simply wouldn't let up at one point and flooded us with about 10 packets/second for an hour or two of only RST on those obscure high ports. Out of the thousands of nodes we're connecting to, this is the only one ever to show this behavior. What could possibly cause this? EDIT Below is a screenshot of Wireshark when it happened. I don't have the actual dump anymore and can't reproduce this specific scenario every time. Basically, we sent a SYN and immediately got RST on an odd port and so we respond with RST and just keep going back and forth.

    Read the article

  • Why does the Internet WI-FI connection of my laptop disconnect when I connect the ethernet cable to the LAN?

    - by Joey Hammer
    Why does the Internet WI-FI connection of my laptop disconnect when I connect the ethernet cable to the LAN? These are two separate networks, the LAN is without Internet, I just use it to connect the tablet to the laptop and smart phone in my home network. The WI-FI is owned by the landlady and connects to the Internet. I know it should be possible to be connected both to the Internet through WI-FI and to my other computers and gadgets through the LAN because sometimes it works, but sometimes when I connect the ethernet cable the WI-FI disconnects and I wonder why? Pongy OS: Windows 7

    Read the article

  • Frequent connection drops when playing online games (StarCraft 2, Battlefield 3) and behind NAT - how to diagnose? [migrated]

    - by Moshev
    I am having some trouble with (I suspect) my wireless router. It's connected to the internet with a regular lan cable and has a static, public IP address. Our two home PCs connect to the router with regular lan cables, plus there's a laptop which connects over wifi. diagram: Internet | | <- isp-supplied cat5 ethernet cable | D-Link D300 ...wifi... laptop / \ / <- cable -> \ PC1 PC2 The PCs and laptop are behind NAT and share the router's public IP. The router is a D-Link D300. PC1 is used for online gaming and I'm experiencing frequent "connection dropped" errors when playing Battlefield 3, StarCraft 2 and the Diablo 3 beta; but not with TeamFortress 2 or the Tribes Ascend beta. The issue goes away when I remove the router and connect PC1 directly to the ISP's cable. I have also tried disconnecting PC2 and the laptop, leaving PC1 as the only machine connected to the router - doesn't help. How can I diagnose what precisely the issue is?

    Read the article

  • Is it possible to detect that a database connection is to a copy rather than to the original database?

    - by user149238
    I have an application that needs to know if it is connected to the original database that it was installed with or if the connection is to a copy of that database. Is there any known method to know if the database has been cloned and the application is no longer connected to the original? I am specifically interested in MS SQL Server and Oracle. I was kicking ideas around for a stored procedure but that most likely doesn't have access to the hardware to confirm unique hardware information that would somewhat guarantee that the database is the one that it was originally connected to during installation. I'm trying to prevent/detect cloning of a database so that there is only 1 "true location of truth". Thanks!

    Read the article

  • How do I bridge a connection from Wi-Fi to TAP on Mac OS X? (for the emulator QEMU)

    - by penx
    I'm trying to setup a bridge between my Wi-Fi connection and an emulator (QEMU). I need a virtual machine to be on the same LAN as the host, with its own IP address. QEMU requires using a TAP (virtual network device) so I have installed tuntaposx, have it running, and can open up QEMU using a TAP: qemu-system-arm -kernel zImage.integrator -initrd arm_root.img -m 256 -net nic -net tap,ifname=tap1 -nographic -append "console=ttyAMA0" I have a script that configures the bridge once QEMU has opened up the TAP interface: sysctl -w net.link.ether.inet.proxyall=1 sysctl -w net.inet.ip.forwarding=1 sysctl -w net.inet.ip.fw.enable=1 ifconfig bridge0 create ifconfig bridge0 addm en1 ifconfig tap1 0.0.0.0 up ifconfig bridge0 addm tap1 ifconfig bridge0 up If I manually set an IP on the VM, I can ping from the VM to the host, but not from the host to the VM. Also, I can't access the rest of the network from the VM - including not being able to set an IP over DHCP. Any ideas?

    Read the article

  • What can I do to configure my SSH such that it pauses for a flaky connection?

    - by kfmfe04
    I run ssh from OSX to a Ubuntu box - under home WIFI, everything works perfectly. However, when I ssh from certain external networks, ssh may be working fine for a minute or two and then drop due to a flaky network (diagnosed by pinging 8.8.8.8). How can I set up ssh so that it simply waits/pauses rather than drop (when dropping, I have to setup my development environment from scratch - a big hassle). EDIT When I say a bad connection, I mean, for example, ping 8.8.8.8 will work fine for a while, and then fail for 40-50 pings, and then come back on again.

    Read the article

  • Frequent connection drops when playing online games (StarCraft 2, Battlefield 3) and behind NAT - how to diagnose?

    - by Moshev
    I am having some trouble with (I suspect) my wireless router. It's connected to the internet with a regular lan cable and has a static, public IP address. Our two home PCs connect to the router with regular lan cables, plus there's a laptop which connects over wifi. diagram: Internet | | <- isp-supplied cat5 ethernet cable | D-Link D300 ...wifi... laptop / \ / <- cable -> \ PC1 PC2 The PCs and laptop are behind NAT and share the router's public IP. The router is a D-Link D300. PC1 is used for online gaming and I'm experiencing frequent "connection dropped" errors when playing Battlefield 3, StarCraft 2 and the Diablo 3 beta; but not with TeamFortress 2 or the Tribes Ascend beta. The issue goes away when I remove the router and connect PC1 directly to the ISP's cable. I have also tried disconnecting PC2 and the laptop, leaving PC1 as the only machine connected to the router - doesn't help. How can I diagnose what precisely the issue is?

    Read the article

  • What antivirus software supports updates without an internet connection?

    - by Michael Gundlach
    I'm putting antivirus software on Windows 7 computers in the middle of Africa. The computers don't have internet access, but still need to be protected against viruses from CDs and thumbdrives. Separate from these computers is one computer that does have extremely spotty internet access. What's the best AV software for this situation? The important part, as I see it, is that we need to keep the computers up to date, but can't let the AV software suck down updates at its leisure: the computers are disconnected, and getting emails onto the connected computer is a challenge enough. We thought we might transfer update files to the connected computer using a protocol that can handle repeated connection drops (e.g. FTP with resume.) Then we'd manually apply the update files to the disconnected computers. Does any AV software support this? Is there a better solution?

    Read the article

  • Connection between Windows Web Server in DMZ and Windows Application Server and MS SQL Database Server within LAN [closed]

    - by user1345260
    Excuse me for being naive. But I'm a newbie. We have a Windows Web Server within DMZ and a Windows Application Server and MS SQL Database Server. What ports do we open for connection between them? For example: Someone opens the Data Driven Website on the Web Server and they should be able see the data that the website is trying to access from the Database. Currently, I'm planning to open the following ports on the Web Server to establish the access, 80 HTTP 443 HTTPS 21 FTP 3389 RDP 53 DNS 1433 MS SQL Server Please validate my assumption. I would highly appreciate your help. Also, please provide me any articles on this topic so that I can read.

    Read the article

  • Why does my ethernet connection keep re-connecting, only with Windows?

    - by Nick Bolton
    I'm using Windows 7, and I have several computers on my network. For some reason, the network connection keeps disconnecting and immediately re-connecting. Infact, it may just be refreshing the DHCP lease... but I'm not sure. I've tried changing the network card, and ethernet cable, but the issue is still happening. I can only imagine that the issue is with the ethernet switch, but this doesn't happen on my other desktop which uses the same ethernet switch. Any ideas?

    Read the article

< Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >