Search Results

Search found 4765 results on 191 pages for 'wireless printers'.

Page 175/191 | < Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >

• Load balancing with multiple gateways

  - by ttouch

  I have to different ISPs, each on each own network. The main connects via ethernet and the secondary via wifi. The two networks have no relation at all. I just connect to them simultaneously. The reason I want to load balance between them is to achieve higher Internet speeds. Note: I have no advanced network hardware. Just my pc and the two routers that I have no access... main network: if: eth0 gw: 192.168.178.1 my ip: 192.168.178.95 speed: 400 kbit/s secondary network: if: wlan0 gw: 192.168.1.1 my ip: 192.168.1.95 speed: 300 kbit/s A diagram to explain the situation: http://i.imgur.com/NZdsv.jpg I'm on Arch Linux x64. I use netcfg to configure the interfaces Configs: # /etc/network.d/main CONNECTION='ethernet' DESCRIPTION='A basic static ethernet connection using iproute' INTERFACE='eth0' IP='static' ADDR='192.168.178.95' # /etc/network.d/second CONNECTION='wireless' DESCRIPTION='A simple WEP encrypted wireless connection' INTERFACE='wlan0' SECURITY='wep' ESSID='wifi_essid' KEY='the_password' IP="static" ADDR='192.168.1.95' And I use iptables to load balance, rules: #!/bin/bash /usr/sbin/ip route flush table ISP1 2>/dev/null /usr/sbin/ip rule del fwmark 101 table ISP1 2>/dev/null /usr/sbin/ip route add table ISP1 192.168.178.0/24 dev eth0 proto kernel scope link src 192.168.178.95 metric 202 /usr/sbin/ip route add table ISP1 default via 192.168.178.1 dev eth0 /usr/sbin/ip rule add fwmark 101 table ISP1 /usr/sbin/ip route flush table ISP2 2>/dev/null /usr/sbin/ip rule del fwmark 102 table ISP2 2>/dev/null /usr/sbin/ip route add table ISP2 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.95 metric 202 /usr/sbin/ip route add table ISP2 default via 192.168.1.1 dev wlan0 /usr/sbin/ip rule add fwmark 102 table ISP2 /usr/sbin/iptables -t mangle -F /usr/sbin/iptables -t mangle -X /usr/sbin/iptables -t mangle -N MARK-gw1 /usr/sbin/iptables -t mangle -A MARK-gw1 -m comment --comment 'send via 192.168.178.1' -j MARK --set-mark 101 /usr/sbin/iptables -t mangle -A MARK-gw1 -j CONNMARK --save-mark /usr/sbin/iptables -t mangle -A MARK-gw1 -j RETURN /usr/sbin/iptables -t mangle -N MARK-gw2 /usr/sbin/iptables -t mangle -A MARK-gw2 -m comment --comment 'send via 192.168.1.1' -j MARK --set-mark 102 /usr/sbin/iptables -t mangle -A MARK-gw2 -j CONNMARK --save-mark /usr/sbin/iptables -t mangle -A MARK-gw2 -j RETURN /usr/sbin/iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment "this stream is already marked; escape early" -m mark ! --mark 0 -j ACCEPT /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment 'prevent asynchronous routing' -i eth0 -m conntrack --ctstate NEW -j MARK-gw1 /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment 'prevent asynchronous routing' -i wlan0 -m conntrack --ctstate NEW -j MARK-gw2 /usr/sbin/iptables -t mangle -N DEF_POL /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'default balancing' -p tcp -m conntrack --ctstate ESTABLISHED,RELATED -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'default balancing' -p udp -m conntrack --ctstate ESTABLISHED,RELATED -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j MARK-gw1 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j MARK-gw2 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j MARK-gw1 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j MARK-gw2 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j ACCEPT /usr/sbin/iptables -t mangle -A PREROUTING -j DEF_POL /usr/sbin/iptables -t nat -A POSTROUTING -m comment --comment 'snat outbound eth0' -o eth0 -s 192.168.0.0/16 -m mark --mark 101 -j SNAT --to-source 192.168.178.95 /usr/sbin/iptables -t nat -A POSTROUTING -m comment --comment 'snat outbound wlan0' -o wlan0 -s 192.168.0.0/16 -m mark --mark 102 -j SNAT --to-source 192.168.1.95 /usr/sbin/ip route flush cache (this script was made by fukawi2, I don't know how to use iptables) but I have no Internet connection... output of iptables -t mangle -nvL Chain PREROUTING (policy ACCEPT 1254K packets, 1519M bytes) pkts bytes target prot opt in out source destination 1278K 1535M CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK restore 21532 15M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 /* this stream is already marked; escape early */ mark match ! 0x0 582 72579 MARK-gw1 all -- eth0 * 0.0.0.0/0 0.0.0.0/0 /* prevent asynchronous routing */ ctstate NEW 2376 696K MARK-gw2 all -- wlan0 * 0.0.0.0/0 0.0.0.0/0 /* prevent asynchronous routing */ ctstate NEW 1257K 1520M DEF_POL all -- * * 0.0.0.0/0 0.0.0.0/0 Chain INPUT (policy ACCEPT 1276K packets, 1535M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 870K packets, 97M bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 870K packets, 97M bytes) pkts bytes target prot opt in out source destination Chain DEF_POL (1 references) pkts bytes target prot opt in out source destination 1236K 1517M CONNMARK tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* default balancing */ ctstate RELATED,ESTABLISHED CONNMARK restore 15163 2041K CONNMARK udp -- * * 0.0.0.0/0 0.0.0.0/0 /* default balancing */ ctstate RELATED,ESTABLISHED CONNMARK restore 555 33176 MARK-gw1 tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 tcp */ ctstate NEW statistic mode nth every 2 555 33176 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 tcp */ ctstate NEW statistic mode nth every 2 277 16516 MARK-gw2 tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 tcp */ ctstate NEW statistic mode nth every 2 packet 1 277 16516 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 tcp */ ctstate NEW statistic mode nth every 2 packet 1 1442 384K MARK-gw1 udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 udp */ ctstate NEW statistic mode nth every 2 1442 384K ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 udp */ ctstate NEW statistic mode nth every 2 720 189K MARK-gw2 udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 udp */ ctstate NEW statistic mode nth every 2 packet 1 720 189K ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 udp */ ctstate NEW statistic mode nth every 2 packet 1 Chain MARK-gw1 (3 references) pkts bytes target prot opt in out source destination 2579 490K MARK all -- * * 0.0.0.0/0 0.0.0.0/0 /* send via 192.168.178.1 */ MARK set 0x65 2579 490K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK save 2579 490K RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 Chain MARK-gw2 (3 references) pkts bytes target prot opt in out source destination 3373 901K MARK all -- * * 0.0.0.0/0 0.0.0.0/0 /* send via 192.168.1.1 */ MARK set 0x66 3373 901K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK save 3373 901K RETURN all -- * * 0.0.0.0/0 0.0.0.0/0

  Read the article

• Unable to connect to Linux (Virtual OS-vmware) through Putty on Windows

  - by RBA

  Hi, I want to access my Linux box (Virtual OS) through Putty on Windows using Run command: putty -ssh -P 22 192.168.171.130,,, but it is returning an error message, not able to connect. But few days back I was able to connect it today. But not now. Why?? Windows IP Configuration Host Name . . . . . . . . . . . . : rba7791fd466 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.234.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1395 WLAN Mini-Card Physical Address. . . . . . . . . : 00-24-2B-60-A0-88 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 10.0.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.0.1 DHCP Server . . . . . . . . . . . : 10.0.0.1 DNS Servers . . . . . . . . . . . : 10.0.0.1 Lease Obtained. . . . . . . . . . : Friday, August 28, 2009 4:11:09 AM Lease Expires . . . . . . . . . . : Saturday, August 29, 2009 4:11:09 AM Ubuntu Configuration eth0 inet addr:192.168.171.130

  Read the article

• Network throughput issue (ARP-related)

  - by Joel Coel

  The small college where I work is having some very strange network issues. I'm looking for any advice or ideas here. We were fine over the summer, but the trouble began few days after students returned to campus in force for the fall term. Symptoms The main symptom is that internet access will work, but it's very slow... often to the point of timeouts. As an example, a typical result from Speedtest.net will return .4Mbps download, but allow 3 to 8 Mbps upload speed. Lesser symptoms may include severely limited performance transferring data to and from our file server, or even in some cases the inability to log in to the computer (cannot reach the domain controller). The issue crosses multiple vlans, and has effected devices on nearly every vlan we operate. The issue does not impact all machines on the network. An unaffected machine will typically see at least 11Mbps download from speedtest.net, and perhaps much more depending on larger campus traffic patterns at the time. There is one variation on the larger issue. We have one vlan where users were unable to log into nearly all of the machines at all. IT staff would log in using a local administrator account (or in some cases cached credentials), and from there a release/renew or pinging the gateway would allow the machine to work... for a while. Complicating this issue is that this vlan covers our computer labs, which use software called Deep Freeze to completely reset the hard drives after a reboot. It could just the same issue manifesting differently because of stale data on machines that have not permanently altered low-level info for weeks. We were able to solve this, however, by creating a new vlan and moving the labs over to the new vlan wholesale. Instigations Eventually we noticed that the effected machines all had recent dhcp leases. We can predict when a machine will become "slow" by watching when a dhcp lease comes up for renewal. We played with setting the lease time very short for a test vlan, but all that did was remove our ability to predict when the machine would become slow. Machines with static IPs have pretty much always worked normally. Manually releasing/renewing an address will never cause a machine to become slow. In fact, in some cases this process has fixed a machine in that state. Most of the time, though, it doesn't help. We also noticed that mobile machines like laptops are likely to become slow when they cross to new vlans. Wireless on campus is divided up into "zones", where each zone maps to a small set of buildings. Moving to a new building can place you in a zone, thereby causing you to get a new address. A machine resuming from sleep mode is also very likely to be slow. Mitigations Sometimes, but not always, clearing the arp cache on an effected machine will allow it to work normally again. As already mentioned, releasing/renewing a local machine's IP address can fix that machine, but it's not guaranteed. Pinging the default gateway can also sometimes help with a slow machine. What seems to help most to mitigate the issue is clearing the arp cache on our core layer-3 switch. This switch is used for our dhcp system as the default gateway on all vlans, and it handles inter-vlan routing. The model is a 3Com 4900SX. To try to mitigate the issue, we have the cache timeout set on the switch all the way down to the lowest possible time, but it hasn't helped. I also put together a script that runs every few minutes to automatically connect to the switch and reset the cache. Unfortunately, this does not always work, and can even cause some machines to end up in the slow state for a short time (though these seem to correct themselves after a few minutes). We currently have a scheduled job that runs every 10 minutes to force the core switch to clear it's ARP cache, but this is far from perfect or desirable. Reproduction We now have a test machine that we can force into the slow state at will. It is connected to a switch with ports set up for each of our vlans. We make the machine slow by connecting to different vlans, and after a new connection or two it will be slow. It's also worth noting in this section that this has happened before at the start of prior terms, but in the past the problem has gone away on it's own after a few days. It solved itself before we had a chance to do much diagnostic work... hence why we've allowed it to drag so long into the term this time 'round; the expectation was this would be a short-lived situation. Other Factors It's worth mentioning that we have had about half a dozen switches just outright fail over the last year. These are mainly 2003/2004-era 3Coms (mostly 4200's) that were all put in at about the same time. They should still be covered under warranty, buy HP has made getting service somewhat difficult. Mostly in power supplies that have failed, but in a couple cases we have used a power supply from a switch with a failed mainboard to bring a switch with a failed power supply back to life. We do have UPS devices on all but three of four switches now, but that was not the case when I started two and a half years ago. Severe budget constraints (we were on the Dept. of Ed's financially challenged institutions list a couple years back) have forced me to look to the likes of Netgear and TrendNet for replacements, but so far these low-end models seem to be holding their own. It's also worth mentioning that the big change on our network this summer was migrating from a single cross-campus wireless SSID to the zoned approach mentioned earlier. I don't think this is the source of the issue, as like I've said: we've seen this before. However, it's possible this is exacerbating the issue, and may be much of the reason it's been so hard to isolate. Diagnosis At first it seemed clear to us, given the timing and persistent nature of the problem, that the source of the issue was an infected (or malicious) student machine doing ARP cache poisoning. However, repeated attempts to isolate the source have failed. Those attempts include numerous wireshark packet traces, and even taking entire buildings offline for brief periods. We have not been able even to find a smoking gun bad ARP entry. My current best guess is an overloaded or failing core switch, but I'm not sure on how to test for this, and the cost of replacing it blindly is steep. Again, any ideas appreciated.

  Read the article

• Windows using the DNS suffix search list on all lookups, even valid FQDNs. How to stop this?

  - by RealityGone

  When doing DNS lookups (specifically using nslookup, for some reason most things are not effected) Windows XP Pro SP3 is using the DNS suffix search list for every single one. Even for fully qualified domain names. For example I lookup "www.microsoft.com" but windows actually asks for "www.microsoft.com.eondream.com" (eondream.com is my primary domain). Now I can fix the issue by removing the Primary DNS suffix, but it seems to me that the DNS suffix search list should be for short, invalid names (where dots=0 or something). I'm sure I have a misconfiguration somewhere in windows but I don't know where. I've changed every option I can think of or find. Below is the output of ipconfig /all and nslookup (with debug & db2 enabled). This is using a static IP & (internal) DNS server. C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : frayedlogic Primary Dns Suffix . . . . . . . : eondream.com Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : eondream.com Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1390 WLAN Mini-Card Physical Address. . . . . . . . . : 00-1B-FC-29-EB-6B Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.13.32 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.13.13 DNS Servers . . . . . . . . . . . : 192.168.19.19 C:\nslookup Default Server: shardik.eondream.com Address: 192.168.19.19 set debug set db2 www.microsoft.com Server: shardik.eondream.com Address: 192.168.19.19 ------------ Got answer: HEADER: opcode = QUERY, id = 2, rcode = NOERROR header flags: response, want recursion, recursion avail. questions = 1, answers = 1, authority records = 0, additional = 0 QUESTIONS: www.microsoft.com.eondream.com, type = A, class = IN ANSWERS: - www.microsoft.com.eondream.com internet address = 208.69.36.132 ttl = 0 (0 secs) ------------ Non-authoritative answer: Name: www.microsoft.com.eondream.com Address: 208.69.36.132 (Note: it resolves to that IP because I use the opendns service and that is their suggestion page or whatever you want to call it) If I am reading the nslookup output correctly then it is not a problem with my DNS server because windows is actually asking for the incorrect domain.

  Read the article

• Enhance GIMP’s Image Editing Power with Gimp Paint Studio

  - by Asian Angel

  Does your GIMP installation need a little super-charging? Using Gimp Paint Studio you can add a wonderful set of brushes, tools, and more to GIMP and take your work up to the next level. For our example we chose to install the beta version of Gimp Paint Studio on Ubuntu 10.10. Once you download the .zip file and unzip it, all that you need to do is manually transfer the contents shown here to the appropriate GIMP folders on your system. You can see the location of the destination folders here on our system… Note: Make certain to make a back-up copy of the “sessionrc and toolrc files” before you transfer Gimp Paint Studio into your installation (in case you would like to or need to revert back to the originals later). When you finish transferring the files start GIMP up and get ready to have fun. And if your experience is like ours then you should see a noticeable difference in window size and arrangement from the default settings. Here are some samples of the exceptional artwork done by Ramon Miranda and Mozart Couto using Gimp Paint Studio. Really impressive! Artwork by Ramon Miranda & Mozart Couto. Watch the introduction video and see Gimp Paint Studio in action. Download Gimp Paint Studio for Linux, Windows, and Mac [Gimp Paint Studio Homepage] *Keep in mind that there are stable and beta releases available, so choose the version that you are most comfortable with using. View the Installation Guides for Gimp Paint Studio *Page contains wonderful “video and written” versions for adding/installing Gimp Paint Studio to your system. Gimp Paint Studio Video Tutorials Library Visit the Gimp Paint Studio Gallery Latest Features How-To Geek ETC Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) Enhance GIMP’s Image Editing Power with Gimp Paint Studio Reclaim Vertical UI Space by Moving Your Tabs to the Side in Firefox Wind and Water: Puzzle Battles – An Awesome Game for Linux and Windows How Star Wars Changed the World [Infographic] Tabs Visual Manager Adds Thumbnailed Tab Switching to Chrome Daisies and Rye Swaying in the Summer Wind Wallpaper

  Read the article

• Save Web Articles to Read Later with Instapaper

  - by Mysticgeek

  Have you ever come across a bunch of great articles that you want to read online, but just don’t have the time? Today we take a look at an online service that allows you to read your articles later, either online, or on an iPhone, or eReader. Instapaper Instapaper is an awesome tool that allows you to save web pages so you can read them at a later time. Not only does it save an online article to read later, but also gives you several choices for where you want to read it. Sign up for a free account, and drag the “Read Later” bookmarklet to the bookmarks bar in your browser. To save a page you’ll need to be logged into your account. When you’re at a page that you can’t read right away, just click on the Read Later button in the bookmarks bar. After clicking the Read Later button, a small message is displayed indicating that the page has been saved to the Instapaper site. Save as many pages as you want, and when you’re ready to read them, go to the Instapaper site and you’ll see a list of the articles you saved. You can click on the link to go directly to the saved oage, read it as text (leaving out a bunch of images), or archive the article for later. One of the really appealing beta features is you can save the article in .mobi format for a Kindle, or ePub format for other eReaders such a the Sony Reader. Another neat feature is the “Instapaper Text” bookmarklet that lets you view an article on a graphics heavy page with only text, but doesn’t save it to your account. Before After There are also other cool features such as iPhone Apps, Kindle automatic wireless delivery, send items to Google Reader, and more. If you wish you could collect all of the neat articles you run across each day for reading later via multiple formats, Instapaper is a great tool for the job. Check Out Instapaper Similar Articles Productive Geek Tips Save Pages for Later With Reading List Extension for FirefoxGreat Geek SitesAbout the GeekHow-To Geek Changes in ProgressMake Outlook 2007 Mark Items as Read When Viewed in Reading Pane TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data

  Read the article

• SQLAuthority News – Monthly Roundup of Best SQL Posts

  - by pinaldave

  After receiving lots of requests from different readers for long time I have decided to write first monthly round up. If all of you like it I will continue writing the same every month. In fact, I really like the idea as I was able to go back and read all of my posts written in this month. This month was started with answering one of the most common question asked me to about What is Adventureworks? Many of you know the answer but to the surprise more number of the reader did not know the answer. There were few extra blog post which were in the same line as following. SQL SERVER – The Difference between Dual Core vs. Core 2 Duo SQLAuthority News – Wireless Router Security and Attached Devices – Complex Password SQL SERVER – DATE and TIME in SQL Server 2008 DMVs are also one of the most handy tools available in SQL Server, I have written following blog post where I have used DMV in scripts. SQL SERVER – Get Latest SQL Query for Sessions – DMV SQL SERVER – Find Most Expensive Queries Using DMV SQL SERVER – List All the DMV and DMF on Server I was able to write two follow-up of my earlier series where I was finding the size of the indexes using different SQL Scripts. And in fact one of the article Powershell is used as well. This was my very first attempt to use Powershell. SQL SERVER – Size of Index Table for Each Index – Solution 2 SQL SERVER – Size of Index Table for Each Index – Solution 3 – Powershell SQL SERVER – Four Posts on Removing the Bookmark Lookup – Key Lookup Without realizing I wrote series of the blog post on disabled index here is its complete list. I plan to write one more follow-up list on the same. SQL SERVER – Disable Clustered Index and Data Insert SQL SERVER – Understanding ALTER INDEX ALL REBUILD with Disabled Clustered Index SQL SERVER – Disabled Index and Update Statistics Two special post which I found very interesting to write are as following. SQL SERVER – SHRINKFILE and TRUNCATE Log File in SQL Server 2008 SQL SERVER – Simple Example of Snapshot Isolation – Reduce the Blocking Transactions In personal adventures, I won the Community Impact Award for Last Year from Microsoft. Please leave your comment about how can I improve this round up or what more details I should include in the same. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

  Read the article

• How to Quickly Cut a Clip From a Video File with Avidemux

  - by Trevor Bekolay

  Whether you’re cutting out the boring parts of your vacation video or getting a hilarious scene for an animated GIF, Avidemux provides a quick and easy way to cut clips from any video file. It’s overkill to use a full-featured video editing program if you just want to cut a few clips from a video file. Even programs that are designed to be small can have confusing interfaces when dealing with video. We’ve found that a great free program, Avidemux, makes the job of cutting clips extremely simple. Note: While the screenshots in this guide are taken from the Windows version, Avidemux runs on all of the major platforms – Windows, Mac OS X and Linux (GTK). Image by Keith Williamson. Cutting Clips from a Video File Open up Avidemux, and load the video file that you want to work with. If you get a prompt like this one: we recommend clicking Yes to use the safer mode. Find the portion of the video that you’d like to isolate. Get as close as you can to the start of the clip you want to cut. Once you find the start of your clip, look at the “Frame Type” of the current frame. You want it to read I; if it isn’t frame type I, then use the single left and right arrow buttons to go forward or backward one frame until you find an appropriate I frame. Once you’ve found the right starting frame, click the button with the A over a red bar. This will set the start of the clip. Advance to where you want your clip to end. Click on the button with a B when you’ve found the appropriate frame. This frame can be of any type. You can now save the clip, either by going to File –> Save –> Save Video… or by pressing Ctrl+S. Give the file a name, and Avidemux will prepare your clip. And that’s it! You should now have a movie file that contains only the portion of the original file that you want. Download Avidemux free for all platforms Latest Features How-To Geek ETC How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin The How-To Geek Video Guide to Using Windows 7 Speech Recognition How To Create Your Own Custom ASCII Art from Any Image How To Process Camera Raw Without Paying for Adobe Photoshop How Do You Block Annoying Text Message (SMS) Spam? Battlestar Galactica – Caprica Map of the 12 Colonies (Wallpaper Also Available) View Enlarged Versions of Thumbnail Images with Thumbnail Zoom for Firefox IntoNow Identifies Any TV Show by Sound Walk Score Calculates a Neighborhood’s Pedestrian Friendliness Factor Fantasy World at Twilight Wallpaper Hack a Wireless Doorbell into a Snail Mail Indicator

  Read the article

• Why is /dev/rfcomm0 giving PySerial problems?

  - by Travis G.

  I am connecting my Ubuntu box to a wireless readout setup over Bluetooth. I wrote a Python script to send the serial information through /dev/rfcomm0. The script connects fine and works for a few minutes, but then Python will start using 100% CPU and the messages stop flowing through. I can open rfcomm0 in a serial terminal and communicate through it by hand just fine. When I open it through a terminal it seems to work indefinitely. Also, I can swap the Bluetooth receiver for a USB cable, and change the port to /dev/ttyUSB0, and I don't get any problems over time. It seems either I'm doing something wrong with rfcomm0 or PySerial doesn't handle it well. Here's the script: import psutil import serial import string import time sampleTime = 1 numSamples = 5 lastTemp = 0 TEMP_CHAR = 't' USAGE_CHAR = 'u' SENSOR_NAME = 'TC0D' gauges = serial.Serial() gauges.port = '/dev/rfcomm0' gauges.baudrate = 9600 gauges.parity = 'N' gauges.writeTimeout = 0 gauges.open() print("Connected to " + gauges.portstr) filename = '/sys/bus/platform/devices/applesmc.768/temp2_input' def parseSensorsOutputLinux(output): return int(round(float(output) / 1000)) while(1): usage = psutil.cpu_percent(interval=sampleTime) gauges.write(USAGE_CHAR) gauges.write(chr(int(usage))) #write the first byte #print("Wrote usage: " + str(int(usage))) sensorFile = open(filename) temp = parseSensorsOutputLinux(sensorFile.read()) gauges.write(TEMP_CHAR) gauges.write(chr(temp)) #print("Wrote temp: " + str(temp)) Any thoughts? Thanks. EDIT: Here is the revised code, using Python-BlueZ instead of PySerial: import psutil import serial import string import time import bluetooth sampleTime = 1 numSamples = 5 lastTemp = 0 TEMP_CHAR = 't' USAGE_CHAR = 'u' SENSOR_NAME = 'TC0D' #gauges = serial.Serial() #gauges.port = '/dev/rfcomm0' #gauges.baudrate = 9600 #gauges.parity = 'N' #gauges.writeTimeout = 0 #gauges.open() gaugeSocket = bluetooth.BluetoothSocket(bluetooth.RFCOMM) gaugeSocket.connect(('00:06:66:42:22:96', 1)) filename = '/sys/bus/platform/devices/applesmc.768/temp2_input' def parseSensorsOutputLinux(output): return int(round(float(output) / 1000)) while(1): usage = psutil.cpu_percent(interval=sampleTime) #gauges.write(USAGE_CHAR) gaugeSocket.send(USAGE_CHAR) #gauges.write(chr(int(usage))) #write the first byte gaugeSocket.send(chr(int(usage))) #print("Wrote usage: " + str(int(usage))) sensorFile = open(filename) temp = parseSensorsOutputLinux(sensorFile.read()) #gauges.write(TEMP_CHAR) gaugeSocket.send(TEMP_CHAR) #gauges.write(chr(temp)) gaugeSocket.send(chr(temp)) #print("Wrote temp: " + str(temp)) It seems either Ubuntu must be closing /dev/rfcomm0 after a certain time or my Bluetooth receiver is messing things up. Even when the BluetoothError arises, the "connected" light on the receiver stays illuminated, and it is not until I power-cycle to receiver that I can reconnect. I'm not sure how to approach this problem. It's odd that the connection would work fine for a few minutes (seemingly a random amount of time) and then seize up. In case it helps, the Bluetooth receiver is a BlueSmirf Silver from Sparkfun. Do I need to be trying to maintain the connection from the receiver end or something?

  Read the article

• Comix is an Awesome Comics Archive Viewer for Linux

  - by Asian Angel

  Do you have a terrific collection of comics in electronic form but need a great app to view them with? If you have a Linux system then we have the perfect app for you…Comix, the open source comic reading powerhouse. For our example we installed Comix on our Ubuntu 10.10 system. Just go to the Ubuntu Software Center and conduct a quick search. When you go to install Comix in the Ubuntu Software Center, make sure to scroll all the way to the bottom and select Unarchiver for .rar files. The listing appears as a “non-free version” for some reason, but displays as free once selected. Odd, but nothing to worry about in the end… Once Comix is installed you can find it in the Graphics Section of the Ubuntu Menu. Comix also comes with a nice set of options to let you customize the app to best suit those important comic reading needs. Here is a comprehensive list of the features this little comic reading powerhouse packs into one easy to use package: Fullscreen mode, double page mode, fit-to-screen mode, zooming and scrolling, rotation and mirroring, magnification lens, changeable image scaling quality, image enhancement, can read right-to-left to fit manga, etc., caching for faster page flipping, bookmarks support, customizable GUI, archive comments support, archive converter, thumbnail browser, standards compliant, available in multiple languages (English, Swedish, Simplified Chinese, Spanish, Brazilian Portuguese, & German), reads “JPEG, PNG, TIFF, GIF, BMP, ICO, XPM, & XBM” image formats, reads “ZIP & tar archives natively, RAR archives through the unrar program” runs on Linux, FreeBSD, NetBSD, and virtually any other UNIX-like OS, and more! Have fun reading those comics on your favorite Linux system! Interested in learning more about Comix? Then be certain to drop by the homepage! Comix Homepage Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware Comix is an Awesome Comics Archive Viewer for Linux Get the MakeUseOf eBook Guide to Speeding Up Windows for Free Need Tech Support? Call the Star Wars Help Desk! [Video Classic] Reclaim Vertical UI Space by Adding a Toolbar to the Left or Right Side of Firefox Androidify Turns You into an Android-style Avatar Reader for Android Updates; Now with Feed Widgets and More

  Read the article

• Keep Track of Your Tasks with toDoo

  - by Asian Angel

  A tasks list can be convenient but most times you can not include details for those tasks or have to have an online account to do so. If you want to keep your tasks list with you on your computer or laptop and be able to add plenty of details then you might want to look at toDoo. Note: Requires Adobe AIR (download link at bottom of article). toDoo in Action Once you have installed toDoo everything is rather straightforward for getting started. The first time that you start toDoo there will be a temporary “fill-in” for the “Subject & Details Areas”. Simply highlight over the temporary text and add your information. Notice that if desired you can easily set a custom date and time for your tasks right below the “Details Area”. Note: toDoo does not minimize to the “System Tray”. Once you have everything set all that you need to do is click on “add task”. Here was our first new task being viewed in the “toDoo Description Tab”. Time to add a second task…here you can see the drop-down calendar. You can scroll through and select a different month very easily…just click on the desired day and it will be automatically set. Adding our second task… If you need to edit any of the details for a particular task you can do so in the “Edit toDoo Tab”. This nice little app is convenient and easy to use. Conclusion ToDoo is a simple straightforward app that lets you keep track of your tasks list and relevant details without an online account (especially helpful if you are without a wireless connection at a given moment). If you are looking for more of a list approach that runs on your desktop, then check out our article on Doomi here. Links Download ToDoo at Softpedia Download ToDoo at Adobe Marketplace Download Adobe AIR Similar Articles Productive Geek Tips Turn Chrome’s New Tab Page into a Google Tasks PageMake To-Do Bar in Outlook 2007 Show Only Today’s TasksAdd a non-Google Tasks List to ChromeKeep Track of Homework Assignments with SoshikuTrack the Amount of Time You Spend Online in Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images Get Wildlife Photography Tips at BBC’s PhotoMasterClasses Mashpedia is a Real-time Encyclopedia

  Read the article

• Site Studio Mobile Example - WCM Reuse

  - by john.brunswick

  Mobile internet usage is growing by leaps and bounds and it is theorized that in the not-to-distant future it will eclipse traditional access via desktop browsers. Mary Meeker, a managing director at Morgan Stanley and head of their global technology research team, recently predicted that mobile usage will eclipse desktop usage within the next 5 years in an Events@Google series presentation. In order for organizations to reach their prospects, customers and business partners, they will need to make their content readily available on mobile devices. A few years ago it was fairly challenging to provide a special, separate, site to cater to mobile users using technologies like WML (Wireless Markup Language). Modern mobile browsers have rendered the need for this as irrelevant and now the focus has moved toward providing a browsing experience that works well on small screen sizes and is highly performant. What does all of this mean for Oracle UCM? Taking site content from an existing Site Studio site and targeting it for consumption for mobile devices is a very straightforward process that is aided by a number of native capabilities in the product. The example highlighted in this post takes advantage of dynamic conversion capabilities in Oracle UCM to enable site content to be created and updated via MS Office documents. These documents are then converted to a simple, clean HTML format for consumption in the desktop and mobile browsing experiences. To help better understand how this is possible the example below shows a fictional .COM and its mobile site counterpart that both leverage the same underlying content. The scenario is not complete or production ready, but highlights that a mobile experience may be best delivered by omitting portions of a site that would be present within the version served to desktop clients. If you have browsed CNet (news.com) on a mobile device it becomes quickly apparent that they are serving an optimized version for your mobile device. An iPhone style version can be accessed at http://iphone.cnet.com/. In order to do that they leveraged some work done for the iPhone iUi project developed by Joe Hewitt that provides mobile browsers an experience that is similar to what users may find in a native iPhone application. For our example parts of this framework are used (the CSS) and this approach provides a page that will degrade nicely over a wide range of mobile browsers, since it is comprised of lightweight HTML markup and CSS. The iPhone iUi framework also provides some nice JavaScript to enable animated transitions between pages, but for the widest range of mobile browser compatibility we will only incorporate the CSS and HTML DIV / UL based page markup in our example.

  Read the article

• Nokia vs. The World

  - by Michael B. McLaughlin

  I’m looking forward to the launch of the Nokia Lumia 920. Why? Well, it stacks up better than the competition for one thing. Then there’s also that security problem that certain other phones have. Mostly, though, it’s because I love my Lumia 900 and the 920, with Windows Phone 8, will be even better. Before I got my Lumia 900, I just took it as given that smart phone cameras couldn’t be good. The Lumia taught me that smart phone cameras can be good if the manufacturer treats them as an important component worth spending time and money on (rather than some thing that consumers expect such that they’d better throw one in). I’m extremely pleased with the quality of pictures that my Lumia 900 gives me as well as the range of settings it provides (you can delve in to tell it a film speed, an f-stop, and a whole range of other settings). And the image stabilization features in the Lumia 920 deliver far better results than the others. Nokia has had great maps for a long time and they continue to improve. Even better, they made a deal that puts many of their excellent maps into Windows Phone 8 itself. There are still Nokia-exclusive features such as Nokia City Lens, of course. But by giving the core OS a great set of fundamental map data and technologies, they help ensure that customers know that buying a Windows Phone 8 will give them a great map experience no matter who made the phone. I’ll be getting a 920, myself, but the HTC and Samsung devices that have been announced have some compelling features, too, and it’s great to know that people who buy one of these won’t need to worry about where their maps might lead them. I’m looking forward to the NFC capabilities and Qi wireless charging my Lumia 920 will have. With the availability of DirectX and C++ programming on Windows Phone 8, I’m also excited about all the great games that will be added to the Windows Phone environment. I love my Xbox Phone. I love my Office phone. I love my Facebook phone. I love my GPS phone. I love my camera phone. I love my SkyDrive phone. In short, I love my Windows Phone!

  Read the article

• Problem in installation in My Hp g4 1226se

  - by vivek Verma

  1vivek.100 Dual booting error in Hp pavilion g4 1226se Dear sir or Madam, My name is vivek verma.... I am the user of my Hp laptop which series and model name is HP PAVILION G4 1226SE........ i have purchase in the year of 2012 and month is February.....the windows 7 home basic 64 Bit is already installed in in my laptop.... Now i want to install Ubuntu 12.04 Lts or 13.10 lts..... i have try many time to install in my laptop via live CD or USB installer....and i have try many live CD and many pen drive to install Ubuntu ... but it is not done......now i am in very big problem...... when i put my CD or USB drive to boot and install the Ubuntu......my laptop screen is goes the some black (brightness of my laptop screen is very low and there is very low visibility ) and not showing any thing on my laptop screen..... and when i move the my laptop screen.....then there is graphics option in this screen to installation of the Ubuntu option......and when i press the dual boot with setting button and press to continue them my laptop is goes for shutdown after 2 or 5 minutes..... ...... and Hp service center person is saying to me our laptop hardware has no problem.....please contact to Ubuntu tech support............. show please help me if possible..... My laptop configuration is here...... Hardware Product Name g4-1226se Product Number QJ551EA Microprocessor 2.4 GHz Intel Core i5-2430M Microprocessor Cache 3 MB L3 cache Memory 4 GB DDR3 Memory Max Upgradeable to 4 GB DDR3 Video Graphics Intel HD 3000 (up to 1.65 GB) Display 35,5 cm (14,0") High-Definition LED-backlit BrightView Display (1366 x 768) Hard Drive 500 GB SATA (5400 rpm) Multimedia Drive SuperMulti DVD±R/RW with Double Layer Support Network Card Integrated 10/100 BASE-T Ethernet LAN Wireless Connectivity 802.11 b/g/n Sound Altec Lansing speakers Keyboard Full size island-style keyboard with home roll keys Pointing Device TouchPad supporting Multi-Touch gestures with On/Off button PC Card Slots Multi-Format Digital Media Card Reader for Secure Digital cards, Multimedia cards External Ports 1 VGA 1 headphone-out 1 microphone-in 3 USB 2.0 1 RJ45 Dimensions 34.1 x 23.1 x 3.56 cm Weight Starting at 2.1 kg Power 65W AC Power Adapter 6-cell Lithium-Ion (Li-Ion) What's In The Box Webcam with Integrated Digital Microphone (VGA) Software Operating System: Windows 7 Home Basic 64bit....Genuine..... ......... Sir please help me if possible....... Name =vivek verma Contact no.+919911146737 Email [email protected]

  Read the article

• Manage Your Favorite Social Accounts in Chrome and Iron with Seesmic

  - by Asian Angel

  Are you looking for a way to manage your Twitter, Facebook, Google Buzz, LinkedIn, and Foursquare accounts all in one place? Using the Seesmic Web App for Chrome and Iron you can access your favorite accounts and manage them in a single, simple-to-use interface. A feature that we loved from the start was the ability to access Twitter without creating a special Seesmic account. And in these days of multiple accounts who needs another one to complicate things up? All that you need to do is to sign in with your user name/e-mail along with your password. You do have to authorize access for Seesmic to connect with your account but the whole process (login & authorization) is handled in a single window instance. Now on to a quick look at some of the UI features… The sidebar allows you to add additional columns to the main interface, set your favorite location for Trends, and tie in additional social services as desired. You can also access additional options and controls in the upper right corner. When you are ready to start tweeting click in the blank at the top and enter your text, etc. in the convenient drop-down window that appears. Another nice perk is the ability to switch to a black and grey theme if the white is too bright for your needs. The Seesmic web app provides a simple-to-use, highly efficient way to manage your Twitter account and other favorite social services in a single tab interface. Seesmic [Chrome Web Store] Latest Features How-To Geek ETC Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) Manage Your Favorite Social Accounts in Chrome and Iron with Seesmic E.T. II – Extinction [Fake Movie Sequel Video] Remastered King’s Quest Games Offer Classic Gaming on Modern Machines Compare Your Internet Cost and Speed to Global Averages [Infographic] Orbital Battle for Terra Wallpaper WizMouse Enables Mouse Over Scrolling on Any Window

  Read the article

• How can fix HDMI HDTV overscan when I my TV has no aspect ratio setting?

  - by Colin Dean

  I have a 32" Vizio HDTV. It's a few years old, but running well. I just connected a new nettop to it using HDMI out. It's the Intel 3x00 graphics chipset. I'm seeing overscan, where the resolution in Ubuntu is set to 1280x720, but the TV itself is 1366x768. When I go into the Monitors control applet, I cannot change the resolution to anything other than the current or 640x480. A user had a similar overscan problem, but fixed the overscan by adjusting his TV's aspect ratio settings. I do not have that luxury. Is there a way I can do this without having to delve into xorg.conf or other command-line craziness? I'm more than comfortable doing so, but there must be a cleaner way. I'm running Ubuntu Natty, keeping up with updates and such. Here's the output of lspci: colin@bricktop:~$ lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) 00:04.0 Signal processing controller: Intel Corporation Core Processor Thermal Management Controller (rev 12) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) 03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01)

  Read the article

• A brief introduction to BRM and architecture

  - by Yani Miguel

  Oracle Communications Billing and Revenue Management (Oracle BRM) is the telcos industry´s leading solution intended for communications service providers. This post encourages to know BRM starting with the basics. History Portal was a billing and revenue managament solution to communications industry created by Portal Software. In 2006 Oracle acquired Portal Software and the solution was renamed BRM. Today Oracle BRM is the first end-to-end packaged enterprise software suite for the communications industry, however BRM is just one more product in the catalog of OSS solutions that Oracle offers. BRM can bill and manage all communications services including wireline, wireless, broadband, cable, voice over IP, IPTV, music, and video. BRM Architecture BRM´s architecture consists of 4 layers or tiers. Through these layers are the data, bussines logic and interfaces to connect graphical client tools.Application tier This layer provides GUI client tools enabling communication to other layers through open APIs. Some BRM client applications are: Customer Center Pricing Center Universal Event Loader Web Server BRM Billing Application Collections Center Permissioning Center Furthermore, this layer is where are provided real-time external events. Bussines Process Tier Although all layers are equally important, I think it deserves more atention because in this tier BRM functionality is implemented. All functions that give life to BRM are in this layer coded in C language called Opcodes (System Processes in the image). Any changes or additional functionality should be made here, so when we try to customize the product, we will most of the time programming in this layer (Business Policies in the image).Bussines Process Tier Features: Implements Portal system functionalityValidates data from the application tierModifies Portal behavior through business policies. Business policies can by customized.Triggers external systems using event notification. Object Tier This layer is responsible for transfer the BRM requests into database language and translate BRM requests into external system requests. Without it, the business logic (data from Bussines Process Tier) could not be understood by the relational database. Data tier Data tier is responsable for the storage of BRM database and other external systems databases. External systems include credit card, tax, and directory servers. Finally, It's important to note that BRM is designed to easily integrate with the following solutions:AIA 2.4 Siebel CRM E-Business Suite - G/L onlyCommunications Services Gatekeeper Oracle BI Publisher. Personally, I think that BRM could improve migrating client-server architecture to a fully web platform that works with Oracle Middleware like any product of the Fusion Middleware family. Hopefully there are already initiatives in this area.

  Read the article

• Oracle releases new Java Embedded products

  - by Henrik Stahl

  With less than one week to go to JavaOne 2012, we've spiced things up a little by releasing not one but two net new embedded Java products. This is an important step towards realizing the vision of Java as the standard platform for the Internet of Things that I outlined in a recent blog post. The two new products are: Java ME Embedded 3.2. Based on same code as the widely deployed Oracle Java Wireless Client for feature phones, this new product provides a Java ME implementation optimized for very small microcontroller-based devices and adds - among other things - a new Device Access API that enables interaction with peripherals common in edge devices such as various types of sensors. In addition to the new Java ME Embedded platform, we have also released an update of the Java ME SDK which adds support for the development of small embedded devices. Java Embedded Suite 7.0. This is an integrated middleware stack for embedded devices, incorporating Java SE Embedded and versions of JavaDB, GlassFish and a Web Services stack optimized for remote operation and small footprint. A typical Internet of Things (or M2M) infrastructure contains three types of compute nodes: The edge device which is typically a sensor or control point of some kind. These devices can be connected directly to a backend through a mobile network if they are installed in - for example - a remote vending machine; or, they can be part of a local short-range network and be connected to the backend through a more powerful gateway device. A gateway is the second type of compute node and acts as an aggregator and control point for a local network. A good example of this could be a generalized home Internet access point, or home gateway. Gateways are mostly using normal wall power and are used for multiple applications, deployed by multiple service providers. Finally, the last type of compute node is the normal enterprise or cloud backend. Java ME Embedded and Java Embedded Suite are perfect base software stacks for the edge devices and the gateway respectively, providing the Java promise of a platform independent runtime and a complete set of libraries as well as allowing a programmer to focus on the business logic rather than plumbing. We are very thrilled with these new releases that open up exciting opportunities for Java developers to extend services and enterprise applications in ways that will make organizations more efficient and touch our daily lives. To find out more, come to the JavaOne conference (for technical content) and to the Java Embedded @ JavaOne subconference (for business content). There will be plenty of cool demos showing complete end-to-end applications, provided by Oracle and our partners, as well as keynotes and numerous sessions where you can learn more about the technology and business opportunities.

  Read the article

• How to Use Your Android Phone as a Modem; No Rooting Required

  - by Jason Fitzpatrick

  If your cellular provider’s mobile hotspot/tethering plans are too pricey, skip them and tether your phone to your computer without inflating your monthly bill. Read on to see how you can score free mobile internet. We recently received a letter from a How-To Geek reader, requesting help linking their Android phone to their laptop to avoid the highway robbery their cellular provider was insisting upon: Dear How-To Geek, I recently found out that my cellphone company charges $30 a month to use your smartphone as a data modem. That’s an outrageous price when I already pay an extra $15 a month charge just because they insist that because I have a smartphone I need a data plan because I’ll be using so much more data than other users. They expect me to pay what amounts to a $45 a month premium just to do some occasional surfing and email checking from the comfort of my laptop instead of the much smaller smartphone screen! Surely there is a work around? I’m running Windows 7 on my laptop and I have an Android phone running Android OS 2.2. Help! Sincerely, No Double Dipping! Well Double Dipping, this is a sentiment we can strongly related to as many of us on staff are in a similar situation. It’s absurd that so many companies charge you to use the data connection on the phone you’re already paying for. There is no difference in bandwidth usage if you stream Pandora to your phone or to your laptop, for example. Fortunately we have a solution for you. It’s not free-as-in-beer but it only costs $16 which, over the first year of use alone, will save you $344. Let’s get started! Latest Features How-To Geek ETC What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Make Efficient Use of Tab Bar Space by Customizing Tab Width in Firefox See the Geeky Work Done Behind the Scenes to Add Sounds to Movies [Video] Use a Crayon to Enhance Engraved Lettering on Electronics Adult Swim Brings Their Programming Lineup to iOS Devices Feel the Chill of the South Atlantic with the Antarctica Theme for Windows 7 Seas0nPass Now Offers Untethered Apple TV Jailbreaking

  Read the article

• Installing Ubuntu 12.04 on NUC intel i3 DC3217IYE

  - by Kieron

  System: NUC i3, 2 hdmi ports, ethernet, no wireless. UEFI boot 2x2gb ram 30gb mSATA internal drive Ubuntu 64bit 12.04.03 Hello i am having much trouble loading an OS on my NUC. I started out attempting another OS with various loaders (beast/hack) without much success,(various panics on boot or endless reboot loops, or graphics failures) after many tries i decided to attempt Ubuntu. Many years ago i loaded Ubuntu on an e-machine without an issue so i figured it would go smoothly, nothing could be further from the truth. The Live USB stick loads, but when i am installing the OS it always fails to load grub 2. Obviously it wont boot from SSD without grub2. I searched and found that Boot-repair should fix it...so i created a live usb with boot repair...it refuses to repair the grub because the install never finished and the needed partions are not fully created and flagged. It also demands an internet connection which i am unable to provide. I then ran gparted in an attempt to create the needed partitions manually, then re-ran boot repair turning off the "check internet" option. and disabling the re-install grub hoping it would create the missing directories and or fix the flags. it appeared to run successfully but upon return to the Ubuntu live USB it still fails at the grub2 install. also gparted doesnt have the same choices that Ubuntu install has when creating partitions, causing it to not recognize that i already had a root, or an EFI directory or it sometimes couldnt tell what the format of the partition was...all very annoying the reason i cant connect to internet (and cant upload the error logs) is the nuc only has Ethernet and the location i have to set up is too far away from modem. i can not move the monitor closer to modem as it is a 50inch LCD. I just want to do a basic install with one user acct and remote desktop (vnc) turned on so i can move the NUC to the modem connect via ethernet and then finish setting it up via Remote desktop/VNC chicken from my mac. While i await any assistance you maybe able to provide i am going to attempt to switch to the 32bit version and legacy boot to see if that can load grub. thnx again to anyone that can come up with a possible solution. i would love to hit "erase and install ubuntu" if anyone can figure out what is stopping that simple answer from working. Also disks (CD/DVD) are not an option as neither my Mac mini or my NUC have optical drives, and i have no desire to buy one for one task

  Read the article

• how to start LXDE session automatically after tightvncserver starts to make me able see desktop when connecting to the host via vncclient?

  - by Oleksandr Dudchenko

  I have system which is equipped with Intel Celeron processor 1.1 GHz s370 with 384 Mb of RAM on Intel d815egew motherboard which supports wake-on-lan function. I want to use such a PC for Internet sharing to the local network. Also this PC is a DHCP+DNS server as well as router/gateway. Based on above I decided to install Lubuntu as it is lightweight system. I installed Lubuntu 10.04.4 LTS from alternate ISO. System has no auto login. System boots and has acceptable performance. Host PC has onboard 4 network adapters: eth0 – ethernet controller which is used for Local Network connections. Has static address 10.0.0.1 eth1 – ethernet controller which is not used and not configured so far, I plan to connect printer here later on. eth2 - ethernet controller which is used to connect to Internet, which we plan to share for the local network wlan0 – wireless controller, it is used in role of access poit for local Network and has address 10.0.0.2 We want to control our gateway remotely. So, we need to be able to power it on remotely. To allow this I’ve done the following things: $ cd /etc/init.d/ made a new file with command $ sudo vim wakeonlanconfig Wrote the following lines to the newly created file, saved and closed it #!/bin/bash ethtool -s eth0 wol g ethtool -s eth2 wol g exit Made the abovementioned file executable $ sudo chmod a+x wakeonlanconfig Then included it into autostart sequence during boot. $ sudo update-rc.d -f wakeonlanconfig defaults after system reboot we will be able to poweron system remotely. Than we need to have a possibility to connect remotely to the host via SSH and VNC. So, I installed following packets with the following commands: $ sudo apt-get update $ sudo apt-get install openssh-server tightvncserver Add ssh daemon into autostart sequence during boot. $ sudo update-rc.d -f ssh defaults Power off the host PC $ sudo halt Then I went to remote place, send magic paket and powered the Host up. System started... And I connected to the host via Putty from remote system under Windows. Than logged in and run the command to start vnc server. $ tightvncserver -geometry 800x600 -depth 16 :2 VNC server successfully started and I got message like follows. New 'X' desktop is gateway:2 Starting applications specified in /home/dolv/.vnc/xstartup Log file is /home/dolv/.vnc/gateway:2.log Using UltraVNC Viewer programm under windows I connected to the host's vnc server, enterd the password and.... sow only mouse cursor in form of cross on a grey background of 800x600 dots, no desktop. Here is my .vnc/xstartup file #!/bin/sh xrdb $HOME/.Xresources xsetroot -solid grey #x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & #x-window-manager & # Fix to make GNOME work export XKL_XMODMAP_DISABLE=1 /etc/X11/Xsession The Question: What I have to change and where to make LXDE session start automatically after tightvncserver starts?

  Read the article

• Installation issue after 4 attempts

  - by SixTen

  Have successfully installed Ubuntu 12.10 on 2 laptops, one running Vista & one running Windows8. Made 4 attempts (long downloads of WUBI.EXE) to different HD's & still NO GO. The machine is an older machine with Windows2000Professional installed & running. The system has 3 hard drives; C:(20.5 Gb with 7.26Gb Free), D: (74.5 Gb with 33.1 Gb Free), & E: (35.3 Gb with 24.8 Gb Free) which all have Gigabytes space available; also an A: 3 1/2floppy drive and a CD-drive burner. The CPU processor is older but seems sufficient: AMD Athlon XP 1700+ and the task manager of Windows2000 shows the processor works fine.. The flat-screen display works fine. Here is the error message I receive each time the 'installation configuration' is verified: "No root file system is defined" "Please correct this from partitioning menu" << The Ubuntu operating system is allowing me a couple of options at the very top right menu. I was able to establish a wireless connection but the MAIN homepage won't load with FIREFOX app or any other apps. I cannot access or even find any 'Partitioning Menu" from the displayed page. I cannot access files or Windows Explorer to view drives since I'm not using the Windows O/S. If I try to go back & re-install the UBUNTU 12.10 again, it always asks me to UNINSTALL the one found on the HD & then I run WUBI.EXE again which takes a long time for the download. Do I need to go back into Windows2000 & use Windows Explorer to look at the file structure & add a partition? On previous attempts I have tried loading the WUBI.EXE on all 3 HD's C: D: & E: Sure is frustrating?? Thanks for any suggestions. NEW UBUNTU user & what I've seen so far I like.. (J.R.)

  Read the article

• Ubuntu 12.04 can't detect internal mobile broadband (Gobi 2000)

  - by Anega

  Hi I have been trying Ubuntu to detect and connect using the buit in mobile broadband capability in my HP 110 netbook but until now nothing seems to work Output of lspci command: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) Output of lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1fea:0008 Bus 005 Device 002: ID 03f0:2a1d Hewlett-Packard Bus 001 Device 005: ID 03f0:241d Hewlett-Packard Gobi 2000 Wireless Modem (QDL mode) So far I have been trying what is intended on several pages, trying to update firmware using wine and then moving .mda or whatever files the update package GobiInstaller.mdi throws out. The results are always the same: After running Output of wine msiexec /a GobiInstaller.msi /qb TARGETDIR="c:\temp" fixme:advapi:GetCurrentHwProfileA (0x33fba8) semi-stub fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:win:RegisterDeviceNotificationA (hwnd=0x13e250, filter=0xf7e984,flags=0x00000001) returns a fake device notification handle! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:advapi:RegisterEventSourceW ((null),L"Bonjour Service"): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:winsock:WSAIoctl -> SIO_ADDRESS_LIST_CHANGE request: stub fixme:iphlpapi:DeleteIpForwardEntry (pRoute 0x79e920): stub fixme:iphlpapi:CreateIpForwardEntry (pRoute 0x79e958): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:service:EnumServicesStatusW resume handle not supported fixme:service:EnumServicesStatusW resume handle not supported fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x79e644 0x79e63c fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:storage:create_storagefile Storage share mode not implemented. err:msi:ITERATE_Actions Execution halted, action L"_693CD41C_A4A2_4FA1_8888_FC56C9E6E13B" returned 1603 err:rpc:I_RpcGetBuffer no binding err:rpc:I_RpcGetBuffer no binding andres@andres-HP-Mini-110-1100:~/.wine/drive_c/Qualcomm$ fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e588,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub And creates 2 empty folders, I have been trying hard and I am not sure if I am doing it the way it should be. Thanks

  Read the article

• Display Driver Issue on an hp TX2-1160ea Notebook

  - by Sam

  I'm new to Linux and recently switched to Ubuntu 11.04 due to my project requirement. My laptop has been freezing and going to black screen of death when I run anything related to display (Share desktop, stream video, etc). Today I went through the Ubuntu forum to install the appropriate graphic driver and, after doing it, I rebooted my PC. It gave an error before login saying "select the recovery mode" and after clicking OK, it didn't give the same error on reboot but I've lost the 11.04 graphical interface and all I see is the interface of Ubuntu v10 with slow visuals (even scrolling up/down on browser is really slow). For the reference, here's a desktop screenshot so that you can understand the situation. Also the laptop is overheating. How can I fix this problem? How can i get the Ubuntu 11.04 view back? I also tried Google, but couldn't find any issue like this. Some general Information: Laptop: HP TouchSmart TX2-1160ea Processor: AMD Turion TX2 Memory: 4GB OS: Ubuntu 11.04 Some debugging information:: $ report-hw | grep controller lspci -knn: 00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] lspci -knn: 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] lspci -knn: 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] lspci -knn: 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) lspci -knn: 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) And: $ dpkg -l '*fglrx*' Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii fglrx 2:8.840-0ubunt Video driver for the ATI graphics accelerato ii fglrx-amdcccle 2:8.840-0ubunt Catalyst Control Center for the ATI graphics un fglrx-control <none> (no description available) un fglrx-control- <none> (no description available) ii fglrx-dev 2:8.840-0ubunt Video driver for the ATI graphics accelerato un fglrx-driver <none> (no description available) un fglrx-driver-d <none> (no description available) un fglrx-kernel-s <none> (no description available) un fglrx-modalias <none> (no description available) un xfree86-driver <none> (no description available) un xfree86-driver <none> (no description available) un xorg-driver-fg <none> (no description available) un xorg-driver-fg <none> (no description available) If you need any more information that could help, just ask.

  Read the article

• How do I stop icons appearing on the desktop in a particular area?

  - by Seamus

  When I download something to my desktop, or insert a CD or flash drive, the icon appears on my desktop. When I have conky running, the icon sometimes appears in the top right corner, underneath conky; where I can't see it. How do I stop this happening? My .conkyrc is pasted below. I didn't write it all myself, so I'm not entirely sure what I need to change, or what parts are relevant for this particular question... # UBUNTU-CONKY # A comprehensive conky script, configured for use on # Ubuntu / Debian Gnome, without the need for any external scripts. # # Based on conky-jc and the default .conkyrc. # INCLUDES: # - tail of /var/log/messages # - netstat shows number of connections from your computer and application/PID making it. Kill spyware! # # -- Pengo # # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type override own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # fiddle with window use_spacer right # Use Xft? use_xft yes xftfont DejaVu Sans:size=8 xftalpha 0.8 text_buffer_size 2048 # Update interval in seconds update_interval 3.0 # Minimum size of text area # minimum_size 250 5 # Draw shades? draw_shades no # Text stuff draw_outline no # amplifies text if yes draw_borders no uppercase no # set to yes if you want all text to be in uppercase # Stippled borders? stippled_borders 3 # border margins border_margin 9 # border width border_width 10 # Default colors and also border colors, grey90 == #e5e5e5 default_color grey own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text gap_x 10 gap_y 20 # stuff after 'TEXT' will be formatted on screen TEXT $color ${color orange}SYSTEM ${hr 2}$color $nodename $sysname $kernel on $machine ${color orange}CPU ${hr 2}$color ${freq}MHz Load: ${loadavg} Temp: ${acpitemp} $cpubar ${cpugraph 000000 ffffff} NAME ${goto 150}PID ${goto 200}CPU% ${goto 250}MEM% ${top name 1} ${goto 150}${top pid 1} ${goto 200}${top cpu 1} ${goto 250}${top mem 1} ${top name 2} ${goto 150}${top pid 2} ${goto 200}${top cpu 2} ${goto 250}${top mem 2} ${top name 3} ${goto 150}${top pid 3} ${goto 200}${top cpu 3} ${goto 250}${top mem 3} ${top name 4} ${goto 150}${top pid 4} ${goto 200}${top cpu 4} ${goto 250}${top mem 4} ${color orange}MEMORY / DISK ${hr 2}$color RAM: $memperc% ${membar 6}$color Swap: $swapperc% ${swapbar 6}$color Home: ${fs_free_perc /home}% ${fs_bar 6 /}$color Free Space: ${fs_free /home} ${color orange}NETWORK (${addr eth0}) ${hr 2}$color Down: $color${downspeed eth0} k/s ${alignr}Up: ${upspeed eth0} k/s ${downspeedgraph eth0 25,140 000000 ff0000} ${alignr}${upspeedgraph eth0 25,140 000000 00ff00}$color Total: ${totaldown eth0} ${alignr}Total: ${totalup eth0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} ${color orange}WIRELESS (${addr wlan0}) ${hr 2}$color Down: $color${downspeed wlan0} k/s ${alignr}Up: ${upspeed wlan0} k/s ${downspeedgraph wlan0 25,140 000000 ff0000} ${alignr}${upspeedgraph wlan0 25,140 000000 00ff00}$color Total: ${totaldown wlan0} ${alignr}Total: ${totalup wlan0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} Conky solutions have been offered, but perhaps these aren't the best way of approaching it. What I really want is to stop icons even appearing in that part of the desktop window: that is, I want to make part of the desktop real estate "off-limits" to new icons appearing on the desktop.

  Read the article

< Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >