Search Results

Search found 7154 results on 287 pages for 'networking'.

Page 176/287 | < Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >

  • syslog log of TCP packet

    - by com
    Occasionally, I noticed a lot of following messsages in syslog Nov {datetime} hostname kernel: [8226528.586232] AIF:PRIV TCP packet: IN=eth0 OUT= MAC={mac} SRC={sourceip} DST={destinationip} LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=20361 DF PROTO=TCP SPT=39950 DPT=37 WINDOW=14600 RES=0x00 SYN URGP=0 On the Internet, I found that DOS attack may cause such type of output, unfortunately, I don't understand what does this log mean. The only thing is clear for me is this log is related to network. The source host is the host where nagios is installed. Does it mean nagios somehow does behave well? And what does it mean at all?

    Read the article

  • How to know that my IP is invalid

    - by PeterMmm
    I have a script running that will start up an interface with a new IP. If the script comes up with an IP that is already in use i am in trouble. Is it possible that the script set up the new Ip, detects that this IP is already in use and then check the next one, until it finds an ip that works ? B=192.168.1. I=1 while [ "$I" != "256" ] do ifconfig eth0:1 $B.$I # check here that IP is Ok ! let "I=I+1" done

    Read the article

  • Mount linux partition as Windows network share over internet

    - by CptEO
    I have a Linux server running RHEL 6. I have two Windows servers. All servers are connected directly to the web with an external IP, they are not in a local lan. What I would like to achieve is to setup the Linux server so that it offers a single share (the whole partition) that can be mounted as network drive within Windows. I don't want to use any 3rd party software to access the linux server because I want to use the linux server as a backup for Bare Metal Restore. In order to do so, I need to be able to access the linux partition from within the Windows Recovery Enviroment where I cannot install any 3rd party software. The linux server should only be accessible from given IP addresses (e.g. the 2 windows servers). Does anyone know if the setup I would like to have is possible?

    Read the article

  • What is the best way to setup a heartbeat agent for failover between two VMs?

    - by EGr
    I have two VMs in VirtualBox that use NAT for their network adapters. They are both getting the same IP address, so I will need to reconfigure that; but knowing that, is it possible to set up a heartbeat agent to failover an apache server if one of the two VMs go down? The way I pictured it would be that the webserver would be able to be accessed externally via :80. No matter what VM was running, I would be able to access the website at that IP/port since failover would be setup. I'm running into trouble setting up IPs when the network adapters are set to NAT, and people have told me that I shouldn't be setting the IPs in this configuration. So what should I do to achieve what I'm looking for? Is it even feasible?

    Read the article

  • Router intermittently failing

    - by nomen
    My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. All of these things work most of the time, but break down intermittently, for a few minutes at a time. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing between the bridge and my internet-facing interface: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw Ping(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Also, the router is currently "working", and I checked on a problematic client: arp infrastructure infrastructure.mydomain (10.47.94.1) at 0:23:54:bb:7d:ce on en0 ifscope [ethernet] I tried it when the router was down, and I (eventually) got the same response. It took about 30 seconds to return, though.

    Read the article

  • Server needs to ping outgoing before allowing connection

    - by QuintenVK
    Okay, first our setup: I'm currently working over VPN to a mac mini OSX 10.6 server. We have a testsetup VM running on that, using ubuntu 12.04. Earlier today, there was an outage because of which our mac mini server was reset. Since then, i was unable to initiate a connection to the VM (which i did boot) -- no ssh, no web, ... . I couldn't ssh or web from the mac mini to the vm either. I could do so from within the VM itself, though. Ping did work on all machines. Lastly, I tried pinging from the VM to my laptop. It took a moment, but then it finally started to ping (no timeouts or so). After that, web and ssh magically worked. I then didn't use the machine for about 5 minutes, after which i had to ping from the server to my laptop again before i could setup a connection. I'm in the dark on what this could be, though I think this is something to do with lookups.

    Read the article

  • Avoiding QoS degradation for video streaming clients

    - by aarege31
    Suppose I have two routers connected via a 1Gbit connection. A client behind router 1 streams to a client behind router 2 while other clients behind router 1 transmit data to other clients behind router 2. Are there any best practice policing, scheduling or queue management algorithms available that help a beginner understand what is necessary to prevent QoS degration in simple cases as above as well as in real world environments?

    Read the article

  • setting up my own name server

    - by mmokh
    I'm in the process of setting up my own name servers using BIND9, however I want to visualize the name server setup in relation to registrars and other name servers. Say I have a domain www.mydomain.com I setup my 2 name servers: ns1.mydomain.com - 192.168.0.1 ns2.mydomain.com - 192.168.0.2 1) How does the world know that my name servers are now at ns1.mydomain and ns2.mydomain. I read about setting up glue records at my registrar. Could you please elaborate on this, i.e. once i setup these glue records, can I now use my name servers in NS records for any other domain? For e.g. NS records for www.otherdomain.com - ns1.mydomain.com/ns2.mydomain.com 2) Given I setup the glue records as mentioned above, do I "have to" update mydomain.com NS records to point to my name servers? Can I keep mydomain.com NS records pointing to my registrars name servers, however use ns1.mydomain.com/ns2.mydomain.com as name servers for any other domain I own? Thanks

    Read the article

  • one of my web hostings is down - only for me - why ?

    - by Thomas Traub
    My first post here, I am reading / learning a lot, thanks ;). I've got a mysterious issue (for me) and would really appreciate to get it solved. I've rent a reseller package with bibihost.com and it's now the second time that all my domaines the hoster's site are unavailable from my connection (my Mac and my iPhone), (in browser, per FTP, ping, ab, and traceroute) This has never before happened to me with other web addresses. traceroute get's always stuck at a specific server 40g.vss-1-6k.routers.chtix.eu (91.121.131.29) The sites are all up for everyone else, I've checked with downforeveryoneorjustme.com, a homegrown script loaded to another server and montastic.com My question(s) : Why am I blocked ? Is there anything I can do about it ? If I cannot solve this issue I have to change the hoster, but I really would like to know what's going on. my domaines on this server : tienstiens.fr tomlegrand.com

    Read the article

  • Mark packets across computers?

    - by eudemo
    I use Transmission on Ubuntu and I'm having this issue, which basically says that QoS is broken because there is no way to limit which outgoing ports uses. I was thinking of doing a dirty and ugly hack and create an interface alias and define QoS based on source address, but was wondering if is there another way. Is it possible to mark the packets on the original machine in some way, using the owner and mark modules of iptables and sending this to the router who does the QoS? From what I understand, mark on iptables only applies to the local machine, so this will not work, but is there another way?

    Read the article

  • How do I create a script that checks if a computer is connected via wireless or ethernet?

    - by user4941
    I am using log-me-in Central to look after a few dozen computers. These computers are used both for home use and work use. When the computers are used for work, they should not be connected via wireless. In the best case, I'd like to be able to use LogMeIn to prevents users on shift from connecting wirelessly. Still acceptable would be to have the computer email me if it connects wirelessly. If I knew how to set up a script that checks to see if the computer connected wirelessly and I could send an email, then I would be set.

    Read the article

  • How to install (old) packages for Ubuntu 9.04?

    - by wchrisjohnson
    Based on some excellent feedback by Mark here (http://serverfault.com/questions/285598/should-i-clone-a-physical-server-to-create-a-vm-for-a-staging-server), today I was able to use the vmware converter to clone my production server for a staging server. However the nic won't come up no matter what I do. I attempted to inistall vmware tools, as I suspect that the fact that it is not installed might prevent the nic from working. (I have the nic set as a vmxnet3 card in the vm settings). The install failed because there were several dependencies missing as well as the Linux headers. Given that Ubuntu 9.04 has been EOL'd, the packages I need to install to get the vmware tools to install are no longer available. I doubt the ubuntu 9.04 install CD has the packages on it. What are my options? I'd rather not upgrade the version of Ubuntu yet, as the point of the vm right now is to maintain parity with the production server. Might I have better luck resetting the driver to use vmxnet2 instead of the vmxnet3? Thanks in advance! Chris

    Read the article

  • WIFI connection not working

    - by chris verwey
    We have a wireless network that is set to secure, it does show as unsecure on my laptop, and desktop connect to router but no internet access. other computers on the network require password to connect to router and get internet access. Iphone and Ipads connect using password and also have internet access, what can I do to fix it. Laptop = dell e6410 Router = netgear The laptop work on other wireless networks without any problem

    Read the article

  • Bridging networks problems

    - by Eric
    In my setup I have 3 computers and 2 (wireless d-link) routers. Computer1 has ethernet and wireless interfaces ethernet : 192.168.0.x (DHCP) wireless : 192.168.10.254 (static) Computer 2 has ethernet with two ips ethernet1 : 192.168.0.90 (static) ethernet2 : 192.168.10.110 (static) Computer 3 is a particular device with a hardcoded ip that I can't change wireless : 192.168.10.41 (static) Router1 manages internet and DHCP for network 192.168.0.0/24 Router2 is more complicated. I don't use DHCP. I use it to bridge between both networks. Its static ip is 192.168.10.1 Computer1 can ping Computer2. Computer1 can ping Computer3. Computer1 can ping Router1. Computer1 cannot ping Router2. Computer2 cannot ping Computer3. Computer2 can ping Router2. Router1 can ping Router1 Router2 can ping Computer2 Router2 cannot ping Computer1 Router2 cannot ping Computer3 This is very weird. Router2 manages the wireless connection, it should be able to ping its own computers right? My question is obviously : How can I make it so Computer2 can access everything else. This is a traditional case of "it was working before christmas and now it doesn't". The ethernet wiring is as follow : [ Computer1 ]----[ Router1 ]---[ Router2 ]---[ Computer3 ] I am using switch (lan) ports on Router1/2.

    Read the article

  • How do I configure IIS to allow access to network resources for PHP scripts?

    - by Dereleased
    I am currently working on a PHP front-end that joins together a series of applications running on separate servers; many of these applications generate files that I need access to, but these files (for various reasons) reside on their parent servers. If I, from the command line, issue a bit of script such as: <?php var_dump(glob("\\\\machine-name\\some\\share\\*")); I will get the full contents of that directory, proving that there's no problem programmatically with PHP reading the contents of a UNC share. However, if I try to execute the same script from the web server, I get an empty array -- more specifically, if I use more explicitly functions designed to "open" a directory like it was a file, I get access errors. I believe this to be a permissions issue, but I am not a server/network administrator type, so I'm not sure what I need to do to correct this and get my script running, and the links I've checked out have not been a terrible amount of help, perhaps due to my background, or lack thereof as far as IIS is concerned, coupled with the fact that we are not actually using .NET for this. Relevant Stats: Windows Server 2008 Standard SP2 IIS 7.0 PHP 5.2.9 I will be connecting to two types of servers: a few other nearly-identical Server 2008 machines, and a machine running embedded XP. Links that have not been particularly helpful but maybe I am just misreading: http://support.microsoft.com/?id=306158 http://support.microsoft.com/kb/207671/EN-US/ http://support.microsoft.com/kb/280383/

    Read the article

  • Can't see a Windows XP computer on the network

    - by user56614
    I have two PC's connected to the same router. One is running Vista Home Premium and the other is running XP Pro. I'm trying to reach the shares of second PC from the first PC. I've enabled file sharing on the XP PC, I've disabled firewall and defender, and I can successfully ping it from the Vista PC. Both computers are set to the same workgroup "WORKGROUP". However, if I try to type "\\192.168.1.2" in Windows Explorer (192.168.1.2 being the IP address of the XP PC), I get a message: "Windows can't access \\192.168.1.2... Error code: 0x80004005 Unspecified error". And If I type "net view \\192.168.1.2" in command prompt, I get "System error 53 has occurred. The network path was not found." Am I missing something trivial?

    Read the article

  • Windows XP SP3 dissapearing mapped drives

    - by Alan Spark
    I am running Windows XP Pro SP3 and I've got a few shares on my NAS that are mapped to reconnect automatically. I can access the drives soon after starting windows but after a period of inactivity I get the error "The local device name is already in use". This cannot be remedied until I restart the computer - I've tried disconnecting and re-mapping without success. This was working fine until I recently reinstalled Windows and I'm not sure what is going on. Any help would be greatly appreciated. Thanks, Alan

    Read the article

  • How to control DVR connected cameras as IP Cameras

    - by Ajay
    We have analog IR cameras (not IP Cameras) and they are connected to DVR model no is (DVR Model: DVR H264, 16 Channel - ECOR264-16X1). We assigned a static IP to DVR and able to view all the cameras connected to it. Our requirement is to view individual cameras and recording option in remote location (the recorded data should store in remote) as like IP Cameras. Is it possible, if not, are there any DVR Model which can support like this.

    Read the article

  • Is there any chance that my data will get silently corrupted with a robocopy SMB network transfer?

    - by Archagon
    I'm setting up a NAS box for the first time. At the moment, I have most of my data backed up to a few local hard drives, and I intend to transfer all the data to my NAS over ethernet once the RAID array is setup. Since this is all happening over the network, I'm a bit worried about my data getting corrupted silently during transfer. From what I understand, data generally doesn't get corrupted without notice on local transfers because a checksum is performed at some point by the drive or the OS. (This could be totally wrong.) Does the same thing happen with SMB, or is it up to the transferrer to check the integrity of their data? And if it doesn't happen with SMB, is there a protocol that does ensure data integrity? I know that rsync can checksum a transfer, but I'm on Windows and I already have a robocopy configuration that I like. Will my data be safe or do I have to use an external checksum tool to make sure?

    Read the article

  • How can I disable internet for a specific interface in Windows 7?

    - by MGSoto
    I have two NICs on my machine, one which connects to my network and has my internet connection. The other connects to a buddy next doors network with his internet connection. I don't want Windows magically deciding which internet connection to use, I want it to use mine. I've had some success by blanking out DNS servers for his connection, but then I also lose hostname resolution on his network and I realize this doesn't solve everything 100%. How can I force Windows to use only my connection while avoiding the use of a router?

    Read the article

  • Delete a iptables chain with its all rules

    - by timy
    I have a chain appended with many rules like: > :i_XXXXX_i - [0:0] > -A INPUT -s 282.202.203.83/32 -j i_XXXXX_i > -A INPUT -s 222.202.62.253/32 -j i_XXXXX_i > -A INPUT -s 222.202.60.62/32 -j i_XXXXX_i > -A INPUT -s 224.93.27.235/32 -j i_XXXXX_i > -A OUTPUT -d 282.202.203.83/32 -j i_XXXXX_i > -A OUTPUT -d 222.202.62.253/32 -j i_XXXXX_i > -A OUTPUT -d 222.202.60.62/32 -j i_XXXXX_i > -A OUTPUT -d 224.93.27.235/32 -j i_XXXXX_i when I try to delete this chain with: iptables -X XXXX but got error like (tried iptables -F XXXXX before): iptables: Too many links. Is there a easy way to delete the chain by once command?

    Read the article

< Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >