Search Results

Search found 5907 results on 237 pages for 'dist upgrade'.

Page 177/237 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

• cannot boot ubuntu 13.10 with my usb, Can i change the kernal on my laptop to run it?

  - by Carlos Dunick

  Currently i am running 12.04 and looking for an upgrade to 13.10 I first tried a bootable 64bit usb and failed. With the message saying "Kernal requires an x86-64 CPU but only detected an I686 CPU Unable to boot please use a kernal appropriate for your CPU" then tried 32bit and same message came up. Is this due to my laptop simply being to slow? or can/should i change the kernal somehow? Acer Aspire 5710z Intel Pentium dual core processor, 1.73Ghz, 533 MHz FSB, 1 MB L2 cache. 2GB DDR2 lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) 00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) 04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) 06:00.0 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller 06:00.1 SD Host controller: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller 06:00.2 FLASH memory: ENE Technology Inc Memory Stick Card Reader Controller 06:00.3 FLASH memory: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller

  Read the article

• How to ask developers to think about high resolution screens

  - by WhiteWind

  I just got a ASUS N56VZ laptop, and it`s all good, but the screen resolution 1920x1080px. I am not asking, how to scale ui elements. If someone is interested I have found some tricks: increase font size in system settings increase unity dock size in MyUnity or system settings in modern Ubuntu versions. tweak userChrome.js of FireFox to make buttons|panels|icons larger add DefaultZoomLevel extension to FireFox to make it zoom pages initially. But all of it is miserable, because there are some big bugs: window decoration elements are way too small to pick them with mouse. I can't scale window easily and I can't position my cursor fast on the close|maximize buttons. Tuning lines like in sound volume dialog are hardly clickable at all. Unity top panel (status panel & tray) hardly can contain the bigger font, so it looks ugly, but icons are still the same. Sometimes I can`t read text, as it is cropped (and I cant scale some dialogs as it has fixed size) Chromium is not usable at all (ok, it's not Ubuntu problem, but the problem still exists) JAVA applications are not scalable (same as above) In FF I am able to get descent results in most cases, but multiplication of system font increase and browser font increase makes system controls (combobox, lists, drop down lists) extremely big, so I cant even control the zoom level on the page. IMHO, we should post a bug report (but what kind of bug?) and vote for it! The problem is even deeper, but at least we should ask developers to think about it. So my question is: how can I post a report (the right words and right place) and how can we (who already has that problem, or who want it to be solved before hardware upgrade) vote for faster solution. Any ideas?

  Read the article

• Lots of Internet browsing issues, all browsers

  - by dario_ramos

  Before the upgrade, everything was working fine. Now, however, I can connect to the Internet but a lot of stuff fails, and the weirdest thing is that it happens with Firefox, Chromium and Opera. Some of the things that fail: I can't log in to Stack Overflow, after entering user/pass it loads for a long time on Firefox and throws Error 408 (browser request timed out) on Chromium and Opera I can't log in to Hotmail, similar symptoms I can login to Facebook, but when I try to write a comment, or just post something in my wall, it stays loading for a long time, and then fails The first two issues seem to be related to secure pages, and the second one is another issue altogether, I believe. However, they all happen with all browsers, which is really weird. Talking about weird: I connect using a Huawei SmartAX MT 810 USB modem, which cost me blood and tears to get it working under Ubuntu. I ordered an ethernet modem/router with my ISP, and I'm still waiting, but this issue intrigues me anyway. Has anyone experienced this kind of problems? I Googled around, but couldn't find a similar case.

  Read the article

• menu not showing in apps when maximized 12.10

  - by chazdg

  I have removed the Global App Menu as I prefer to have the minimize, maximize, close buttons on the right side of each app. I did this with no problem in 12.04. I did an upgrade to 12.10 and noticed that Chrome, Chromium and Firefox all use the Global Menu. I have done the following: sudo apt-get autoremove appmenu-gtk appmenu-gtk3 appmenu-qt I have disabled the Firefox extension. I removed the corresponding Firefox package but still only have a global menu. I tried Gconf but apparently that does not work in 12.10. I then tried Dconf and found this fix on Google: org gnome desktop wm preferences, look for "button_layout" on the right panel. Here is the problem, after desktop, I do not have wm. I reset Unity and got a message saying something about wm is missing. I rebooted and opened Chrome and still no fix. I then clicked maximize and once Chrome was not maximized anymore, the minimize, maximize, close buttons show up in Chrome. Same with Firefox! Any ideas? I am truly stumped. Firefox and Chrome work fine in KDE Plasma and Gnome when maximized.

  Read the article

• Unity no longer loads in 13.04 for main user

  - by user152973

  When Ubuntu starts up, Unity fails to load (I can only see my desktop with no unity sidebar and no system bar in the top right). I tried the advice of Unity does not start in Ubuntu 13.04 which recommended the following commands: dconf reset -f /org/compiz/ unity --reset-icons &disown I ran the commands without errors an restarted the computer, but the problem persists. I am currently running Gnome. I have looked at other pages from the Google search "ubuntu unity failed to load 13.04", but the advice was similar to above and seems to be concerned with a system upgrade in April 18, 2013. I suspect my issue is something far more recent. Please give me advice on how to restore Unity on my account or at least figure out what the problem is. Thank you. Some information that might be relevant: -Unity has worked fine on 13.04 for the 6 months that I've had it until today. (November 10, 2013) -I have set up the update tool to automatically update when available. It is very possible that the system applied some updates without my knowledge. -Interestingly, Unity works fine on the Guest account. -I have made it so the system automatically logs me in at start-up. -This is a personal laptop. No one else has access to it. -I was not doing anything with the system settings or the terminal and have not installed any new software for the past 3 days. -I am running the System76 native Linux laptop Ultra Lemur. I did not contact their support yet because it seemed unlikely that this is a System76-specific error.

  Read the article

• Oracle Forms: Walking the path to FMW Platform – webcast September 24th 2012

  - by JuergenKress

  The next 5 year Strategy Preparing for the Next Generation Applications Oracle Forms, a component of Oracle Fusion Middleware, is Oracle's long-established technology to design and build enterprise applications quickly and efficiently. Oracle remains committed to the development of this technology, and to the ongoing release as a component of the Oracle platform. This continuing commitment to Forms technology enables you to leverage your existing investment by easily upgrading and integrating existing Oracle Forms applications to take advantage of web technologies and service oriented architectures (SOA). For more information please visit our Forms OTN page. Agenda Why update? – New business imperatives What is the path? Why walk it with Oracle? Support Lifetime – upgrade to updates Summary Audience Enterprise & Solution Architects R&D leaders Project Managers and Project Leaders Delivery Format This FREE online LIVE eSeminar will be delivered over the Web and Conference Call. Duration 1 hour Forms: Walking the path to FMW September 24th, 2012, 9am BST Register Here! WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Forms,PTS,future of forms,forms roadmap,forms soa,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Am I running out of memory or do I have two logical drives instead of one

  - by user30904

  I did a complete reinstall of Ubuntu 13.04 a couple of months ago. Since then, I have switched out my motherboard with another. I kept the same hard drive. I just did an upgrade to 13.10. Recently, after this install, I keep getting the message that I'm running out of memory. I just checked my system usage and was surprised by what I found. I believed that I installed Ubuntu as a fresh install but when I check the system usage, it seems like there are two logical drives. I just did the basic install, so I was only expecting to see one partition but instead I see two. One is a small 300mb partition, the other is a 300gb partition I was expecting. Can anyone tell me if I have two partitions and/or logical drives and if so how I can fix this? I seem to have been running on the smaller drive and now I'm obviously out of space. I want to be able to use the bigger one at least.

  Read the article

• nVidia 9800 GTX+ X11 fails to initialize. no unity or lightdm

  - by rlemon

  I have just upgraded my work pc to 12.04 (not upgrade, fresh install), installing updates during the install, and after everything has loaded (with no errors) and I restart I get brought to console 1 tty login. Console 7 looks like this: IIRC I did not have to finagle with my drivers on 11.10 to get this card working. If this is in fact a driver bug I will remove this post and submit the bug but i'm not 100% confident that it is. I attempted to run unity --reset and got this: Lastly I tried $ sudo apt-get install nvidia-current which tells me nvidia-current is already the newest version. so I ran $ sudo dpkg-reconfigure nvidia-current which says /usr/sbin/dpkg-reconfigure: nvidia-current is broken or not fully installed. Anything I can try from here would be awesome. Currently the only way to get the system up and running was to shut down, plug one of my monitors into the onboard video, enable the onboard video card from the BIOS, then boot back up (and on my single monitor everything is fine). update So I have been able to boot fresh with the ext card plugged in as long as I don't take the updates with the install. past this if I only install the nvidia drivers (nvidia-current or nvidia-current-updates) from the main server (or canadian) I then get the problems.. My proposal; which I don't know where to look for: Can I try installing the previous version of this driver? In the past, on another machine I had issues with my NIC driver being funky... downgraded to the previous driver and bam everything was merry and well.

  Read the article

• Kubuntu 11.10 Lot of Networking problems

  - by Cobraone

  Since I upgrade to 11.10 I have a lot of problems with KDE. First of all there are problems in configuring a static IP address. Just to explain @home I have a normal fiber ADSL and I use a DHCP. When I go to a customer I must insert a static IP address. With ifconfig everything seems ok but there is something wrong in searching DNS names. (I have installed Ubuntu and was going ok again). Now I Have reinstalled again Kubuntu 11.10 and I have the same problem in addition today I have discovered that if I connect to a network in another customer office the desktop freezes and I could only switch between windows with alt+tab. No FN key or right click to open run command works. So i unplugged network (configuration is just DHCP here) and tried on another position in office. It was the same. My Laptop freezes when connected, a fedora 14 of a friend works. So I decided to connect my Galaxy S II as USB network device. Everything is ok for like 3 minutes. When I noticed a little loss of signal again the desktop freezes and i must work (like now) just switching between windows with alt+tab). Additional information: Unplugging network or restarting it via Konsole does not not solve the freezing problem. Every time I must open a console and reboot. Any idea of what tests to do ? Just a recommendation: If I must post here logs or something else please guide me. I use Linux since Ubuntu 9 but I am not an "expert".

  Read the article

• OBIEE 10g premier support ends Mid 2013

  - by THE

  To give all OBIEE users a fair warning ahead of time. Please be aware that the Premier Support product lifecycle for Oracle Business Intelligence Enterprise Edition and Oracle Business Intelligence Publisher 10.1.3.4.x is ending in July 2013 as of the  lifetime Support policy. Oracle Business Intelligence Enterprise Edition and Oracle Business Intelligence Publisher 10.1.3.4.x will be in Sustaining Support phase. "Sustaining Support" does NOT include: New program updates, fixes, security alerts, and critical patch updates New tax, legal and regulatory updates New upgrade scripts Certification with new third party products/versions 24 hour commitment and response guidelines for Severity 1 service requests as defined in the Severity Level section in the Oracle Technical Support Policies document linked below. We are encouraging you to move to OBIEE 11gR1. For more details please see the following documents on My Oracle Support ( https://support.oracle.com):"Premier Support Ends Dec 31 2011 for Oracle Fusion Middleware 10g 10.1.2 & 10.1.4" (  Doc ID 1290974.1)

  Read the article

• Latest (5 June 14) Updates t0 10.04 Causing Multiple Problems

  - by user291780

  Apologies, the questions are very short, but the bkg isn't. I rec'd a routine notification from the update mgr a few days ago (I believe, June 5th). I took a look and there was lots of linux stuff, headers, etc., nothing obviously unusual. I'd rec'd and updated w/a more extensive pkg set, kernel and all a few weeks ago, no problem. On June 6, I pushed the upgrade button on the June 5th batch, nothing usual, needed a reboot, which I did after a full power down, it came up fine. Gedit worked, the calculator worked, started up firefox, it came up, selected the BookMarks menu, and blam, it hesitated and then greyed out, when I tried to close it, got the "process not responding" msg. Undaunted, I tried to fire up Google Chrome....nothing on the screen or process bar. I fired up the system monitor and indeed there were some "sleeping" chrome processes "running". Powered down several times, but the same problems persist. Similar but worse story when I tried to fire up one of my virtual machines, VirtualBox came up fine, but when I tried to start one of my virtual machines I got a progress popup that I'd never seen before which showed that we were making no progress past 20%. Uninstalled Oracle VirtualBox, reinstalled the latest and greatest, same result. Also, unable to logout, or shutdown once the virtual machine exhibited this behavior. Powered down manually, end of story. Never saw such a bad result after an update. I'm running Ubuntu 10.04 LTS (Lucid Lynx) as I have been for a number of years. Please don't reply with why don't you run some other version of Ubuntu, that doesn't answer the questions below. Questions: Will their be a subsequent update that fixes this, and if so, when? If not, is there a way for me to get back to where I was before this disaster?

  Read the article

• Context switches much slower in new linux kernels

  - by Michael Goldshteyn

  We are looking to upgrade the OS on our servers from Ubuntu 10.04 LTS to Ubuntu 12.04 LTS. Unfortunately, it seems that the latency to run a thread that has become runnable has significantly increased from the 2.6 kernel to the 3.2 kernel. In fact the latency numbers we are getting are hard to believe. Let me be more specific about the test. We have a program that has two threads. The first thread gets the current time (in ticks using RDTSC) and then signals a condition variable once a second. The second thread waits on the condition variable and wakes up when it is signaled. It then gets the current time (in ticks using RDTSC). The difference between the time in the second thread and the time in the first thread is computed and displayed on the console. After this the second thread waits on the condition variable once more. So, we get a thread to thread signaling latency measurement once a second as a result. In linux 2.6.32, this latency is somewhere on the order of 2.8-3.5 us, which is reasonable. In linux 3.2.0, this latency is somewhere on the order of 40-100 us. I have excluded any differences in hardware between the two host hosts. They run on identical hardware (dual socket X5687 {Westmere-EP} processors running at 3.6 GHz with hyperthreading, speedstep and all C states turned off). We are changing the affinity to run both threads on physical cores of the same socket (i.e., the first thread is run on Core 0 and the second thread is run on Core 1), so there is no bouncing of threads on cores or bouncing/communication between sockets. The only difference between the two hosts is that one is running Ubuntu 10.04 LTS with kernel 2.6.32-28 (the fast context switch box) and the other is running the latest Ubuntu 12.04 LTS with kernel 3.2.0-23 (the slow context switch box). Have there been any changes in the kernel that could account for this ridiculous slow down in how long it takes for a thread to be scheduled to run?

  Read the article

• Ubuntu 12.10 hotkeys not working properly [closed]

  - by Sly

  A couple of weeks ago, I ran a distribution upgrade from 12.04 to 12.10. Unfortunately, something has seemed to happen with the hotkeys on the system. At first, I thought that maybe this was just a glitch with the global hotkeys. That didn't turn out to be the case, as the custom hotkey I added into the Ubuntu settings works for my editor. The only default hotkey that seems to have a problem launching is CTRL+ALT+T (Terminal). This wasn't such a big issue to begin with, because I can always just drag the Terminal to my launcher and launch it from there. However, I was on Chrome earlier and tried to do SHIFT+CTRL+DEL to clear the history and it failed. I then tried to do SHIFT+ESC, just to see if the hotkey for the task manager would work.. and it did. I also thought it could be something with the "CTRL" key, since SHIFT+ESC works, but SHIFT+CTRL+DEL doesn't. That didn't turn out to be the case either, as keys like CTRL+ALT+DEL (logout) work perfectly fine. Not quite sure how to go about this, and I haven't found any errors in any of /var/log that raises any suspicion.

  Read the article

• Unable to start after 13.04 > 13.10 udate

  - by romainl

  At the end of the update process, clicking on the Restart button had no visible effect whatsoever. After waiting 5 to 10 minutes, I decided to reboot the computer manually. Since then, I rebooted a good dozen times (not with the hope that it would work but with the hope of reading the messages) with the same non-result and the same symptoms: I get the ASCII text-on-purple Ubuntu 13.10 . . . . splash screen with these messages: * Restoring resolver state... [OK] * Starting crash report submission daemon [OK] * Starting CUPS printing spooler/server [OK] Everything disappears. The whole process hangs at a purple screen with the mouse cursor right in the middle. At this point, I'm unable to use the mouse and the keyboard. Booting from a 12.04 CD works perfectly, Disk Utility says that all my disks are OK and I can mount my main partition without problems. Something obviously went wrong at the end of the upgrade but I have no idea what. I'd appreciate any pointer. This is the kind of moment where you really think "Next time, I'll separate my /home partition for sure". My machine is an aging but working Dell Inspiron 530 with an Intel Core Duo E2160 processor, 2 GHz of RAM and an ATI Radeon HD3650 video card. Thanks.

  Read the article

• Grub gives messages about the boot sector being used by other software. What should I do?

  - by Bobble

  This only happens with one of my computers. It is an elderly laptop that has had a long and varied history with several operating systems, but in its retirement it is acting as a server for my home network using Ubuntu 12.04. It is a single-boot system, there are no other systems installed. Every so often, whenever there is a grub upgrade, I notice a message like this: Setting up grub-common (1.99-21ubuntu3.4) ... Installing new version of config file /etc/grub.d/00_header ... Setting up grub2-common (1.99-21ubuntu3.4) ... Setting up grub-pc-bin (1.99-21ubuntu3.4) ... Setting up grub-pc (1.99-21ubuntu3.4) ... /usr/sbin/grub-setup: warn: Sector 32 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track. Installation finished. No error reported. Should I be worried about this? What (if anything) should I do about it?

  Read the article

• Eclipse will not install Android Support Package [migrated]

  - by Michael Mossman

  I am an experienced programmer but new to Android, hence using Eclipse for the first time. Unfortunately I cannot get my first project off the ground. I get as far trying to create the project when the following sequence happens. A screen arrives titled 'Install Dependencies' telling me that the required version is 8 and the installed version is 'Not installed' I click on the Install/Upgrade button and something must happen because Android SDK Manager pops up and I get a whole series of 'Fetching:' messages. The next screen asks me to Choose Package to Install and the only option is Android Support Library, revision 10. This doesn't bother me as I presume 10 is better than 8 so I hit the Install button. This is where it all goes wrong as I get a red message saying: File not found: C:\Program Files (X86)\Android\android-sdk\temp\support_r10.zip (Access is denied). Sure enough, when I check this folder, it is empty. Now, something must have happened as as SDK Manager did a whole lot of fetching and must have put these files somewhere. I am quite happy to find them and put them in the correct folder but the question is what is the name of the files that I am looking for?

  Read the article

• Agressive Auto-Updating?

  - by MattiasK

  What do you guys think is best practice regarding auto-updating? Google Chrome for instance seems to auto-update itself as soon as it get's a chance without asking and I'm fine with it. I think most "normal" users benefits from updates being a transparent process. Then again, some more technical users might be miffed if you update their app without permission, as I see it there's 3 options: 1) Have a checkbox when installing that says "allow automatic updates" 2) Just have a preference somewhere that allows you to "disable automatic updates" so that you have to "check for updates manually" I'm leaning towards 2) because 1) feels like it might alienate non-technical users and I'd rather avoid installation queries if possible. Also I'm thinking about making it easy to downgrade if an upgrade (heaven forbid) causes trouble, what are your thoughts? Another question, even if auto-updates are automatically, perhaps they should be announced. If there's new features for example otherwise you might not realize and use them One thing that kinda scares me though is the security implications, someone could theorically hack my server and push out spyware/zombieware to all my customers. It seems that using digital signatures to prevent man-in-the-middle attacks is the least you could do otherwise you might be hooked up to a network that spoofs the address of of update server.

  Read the article

• Why don't windows of the same application behave as they should in Oneiric?

  - by Yuttadhammo

  Somewhere along the upgrade path, Unity has developed some strange logic behind window layering. First, before Oneiric, there was a way to see all the windows of an application - I think it was when you click on the icon in the launcher. Now, clicking on the icon often does nothing. Suppose I have two terminals open, one behind this Firefox window, and one in front of it. Clicking on the launcher does nothing - the only way to find the second terminal, afaics, is to move the Firefox window or use the task switcher (which has a whole slew of problems of its own). Secondly, once I have both terminals on top, then I decide to close one of them, suddenly they both disappear (the second one, for some reason, has gone into hiding behind the Firefox window). Third (though I can't pin it down now), sometimes when a window is on top, focus is still on a window in back; I click on the top x to close the window in front, only to find I've closed an important window in the back. I can't really believe these are bugs, since they seem too obvious to not have been fixed by now. My question is, am I missing something? Some compiz option I can set to make it act like it used to? Or is this really how Unity is supposed to act?

  Read the article

• Aggressive Auto-Updating?

  - by MattiasK

  What do you guys think is best practice regarding auto-updating? Google Chrome for instance seems to auto-update itself as soon as it get's a chance without asking and I'm fine with it. I think most "normal" users benefits from updates being a transparent process. Then again, some more technical users might be miffed if you update their app without permission, as I see it there's 3 options: 1) Have a checkbox when installing that says "allow automatic updates" 2) Just have a preference somewhere that allows you to "disable automatic updates" so that you have to "check for updates manually" I'm leaning towards 2) because 1) feels like it might alienate non-technical users and I'd rather avoid installation queries if possible. Also I'm thinking about making it easy to downgrade if an upgrade (heaven forbid) causes trouble, what are your thoughts? Another question, even if auto-updates are automatically, perhaps they should be announced. If there's new features for example otherwise you might not realize and use them One thing that kinda scares me though is the security implications, someone could theorically hack my server and push out spyware/zombieware to all my customers. It seems that using digital signatures to prevent man-in-the-middle attacks is the least you could do otherwise you might be hooked up to a network that spoofs the address of of update server.

  Read the article

• A Myriad of Options

  - by Mark Hesse

  I am currently working with a customer that is close to outgrowing their Exadata X2-2 half rack in both compute and storage capacity.  The platform is used for one of their larger data warehouse applications and the move to Exadata almost two years ago has been a resounding success, forcing them to grow the platform sooner than anticipated. At a recent planning meeting, we started looking at the options for expansion and have developed five alternatives, all of which meet or exceed their growth requirements, yet have different pros and cons in terms of the impact to their production and test environments. The options include an in-rack upgrade to a full rack of Exadata using the recently released X3-2 platform (an option that even applies to an older V2 rack), multi-rack cabling the existing X2-2 to another full rack or half rack X2-2 (and utilizing both compute and storage capacity in the other rack), or simply adding a new X3-2 half rack (and taking advantage of the added compute and flash performance in the X3-2). While the decision is yet to be made, it had me thinking that one of the benefits of Exadata over a traditional database deployment is that when the time comes to expand the platform, there are a myriad of options.

  Read the article

• What service or software should I use to serve advertising on a site with about 120k monthly page views?

  - by JasonBirch

  I have a site that is generating about 120k monthly page views and is being hosted on a shared FreeBSD server where I have access to PHP and MySQL. I am using some custom PHP server-side scripts that give each of my ad networks (AdSense, Tribal Fusion, etc) an adjustable percentage of impressions in each of the ad positions on my pages. I am looking for a better way of managing and measuring the delivery of these ads, and would also like to be able to take direct placements and provide statistics to the clients. I am looking at options including OpenX self-hosted, OpenX community, and Google DoubleClick for Publishers Small Business (DFP), but am having difficulty determining which one will best meet my needs. They all seem to have pretty steep learning curves compared to my simple scripts. What I have taken away so far as the benefit of self-hosting is that I don't have to pay for the service if I exceed a maximum number of ad impressions, while both OpenX Community and DFP have free impression limits. Of course, if I was doing those kind of numbers I'd need to upgrade my hosting account, but I'm not sure even at that point whether it would be cheaper to serve the ads myself than pay for a premium service. Apart from this, I really need insights into what features differentiate these services, why I might want to choose one over another, and if there are any other competing products or service of the same quality that I should look into. Answers from webmasters who have used both (or all three) services and can talk to usability and ease of ad management would be highly appreciated.

  Read the article

• How should I structure the implementation of turn-based board game rules?

  - by Setzer22

  I'm trying to create a turn-based strategy game on a tilemap. I'm using design by component so far, but I can't find a nice way to fit components into the part I want to ask. I'm struggling with the "game rules" logic. That is, the code that displays the menu, allows the player to select units, and command them, then tells the unit game objects what to do given the player input. The best way I could thing of handling this was using a big state machine, so everything that could be done in a "turn" is handled by this state machine, and the update code of this state machine does different things depending on the state. However, this approach leads to a large amount of code (anything not model-related) going into a big class. Of course I can subdivide this big class into more classes, but it doesn't feel modular and upgradable enough. I'd like to know of better systems to handle this in order to be able to upgrade the game with new rules without having a monstruous if/else chain (or switch / case, for that matter). Any ideas? What specific design pattern other than MVC should I be using?

  Read the article

• List of Asus U46 laptop troubles with Ubuntu 12.04

  - by Cybertib

  I've bought my ASUS U46 last february. I would like to make it work better with Ubuntu 12.04. Note taht I was forced to install Ubuntu 12.04 (before its publication) by ethernet. After a successfull install, several problem remain unfixed such as : USB 3 just does not work correctly. Can be fixed, but I didn't succeed yet. Nvidia Optimus (means that you can use Intel Chipset or the Nvidia GeForce) is possible to use thanks to BumbleBee project. It seems to work, though. But Nvidia tools still say they don't see any Nvidia driver installed. Battery duration can be optimised by using Laptop-tools. Any standby state lead to a X server crash. A good CTRL+ALT+F1 login and "shutdown -r" avoids a brutal power off. And since few weeks, I have some bug reports right after boot about "unattended-upgrade", and dpkg troubles after any apt-get install or update (Linux kernel doesn't compile anymore), ... Are there any ways to fix those troubles ? I would need a bit of assistance, in fact. Thank you for you help, Sincerly yours, Thibault

  Read the article

• Ubuntu 12.10 and nVidia drivers don't like each other?

  - by mingos

  I decided to upgrade both my computers from Precise to Quantal. What a mistake that was. My laptop has a nVidia GT 330M card, while the desktop has an nVidia 9600 GT. In both cases everything goes great as long as I use the Nouveau driver (ugh!). Can't really play games (Amnesia... and hoping for Steam Beta participation...), even though it's OK for work. Now, ever since 9.04 or so, I just installed nvidia-current and all just worked. Since 12.10, after installing nVidia drivers, Unity won't start at all (hangs with only the wallpaper displayed, no cursor or widgets), Gnome Shell is permanently in fallback mode. Now, I have tried on both computers, with multiple clean installs on Ubuntu (two separate downloads, just in case), one from Ubuntu Gnome Remix. And additionally, Fedora 17, which seems to suffer from the same issue. Tried all nVidia driver suggestions available in Software Sources, and even compiled the drivers myself. I tried several versions of the driver to exclude an issue with the newest one. In my frustration, I have switched to Windows (which, ironically, "just works" with my hardware), but still hold a twin OS configuration on the desktop and would like to use Ubuntu again. So, can anyone point me to where the issue might lie?

  Read the article

• Oracle Open World 2012?????

  - by Liu Maclean(???)

  Oracle Open World 2012?????: ???.. Oracle OpenWorld 2012 sessions????:Search Content Catalog for Oracle OpenWorld 2012 sessions ?????????session??? Open World 2012??: Larry ??Exadata X3 OOW 2012???Exadata X3,?? X3-2 ?Expansion Rack X3-2?X3-8 Exadata X3????:http://www.oracle.com/us/products/database/exadata/overview/index.html  ORACLE EXADATA Database MACHINE X3-8 sheetORACLE EXADATA Database MACHINE X3-2 sheet Exadata X3-2???????: X3-2?compute db node?????????8?Intel Xeon E5-2690??? ??????????12????16?,???33%????? ???96GB???128GB,????256GB ??????????50% X3-2 cell node??????????????Intel Xeon ??????flash card flash card??????4?,??flash card?????????40%? ???X3-2???22.4TB?flash ,??????flash????????????????????,???10????? CPU???6?,????????Intel Xeon model ????????X2-2??,???600GB???????3TB?????? ??Exadata X3-2?????????,??????????1/4?????,1/8????????????????? Exadata X3-8???????: X3-8???X2-8?????,???X3-8??????????X3-2??,??X3-8?????22.4TB?????? ???CEO??  Engineered to Work Together OOW????? Oracle Open World 2012 ????? Open World 2012 ??:http://www.oracle.com/openworld/index.htmlOpen World 2012 ????:http://www.oracle.com/openworld/register/packages/index.html ??: Sept. 30 – Oct. 4, 2012 9?30?? 10?4? ??:Moscone Center, San Francisco (747 Howard Street, San Francisco, California 94103). ?????Mark Hurd??OOW 2012: How big is oow OOW 2012?????????: Focus On Database Technologies Focus On Real Application Clusters Focus On Exadata Focus On Oracle Database Appliance Focus On Oracle Database Application Development Focus On Oracle Database Security Focus On Big Data Focus On Data Warehousing Focus On High Availability Focus On Oracle Enterprise Manager Cloud Control 12c (and Private Cloud) Focus On Oracle Spatial and Graph Focus On Oracle Database Utilities Focus On Oracle Database Upgrade Focus On Oracle Database Private Cloud Focus On .Net Focus On Oracle Database on Windows Focus On Engineered Systems Focus On Sunday Users Forum

  Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >