Search Results

Search found 30311 results on 1213 pages for 'dont ask ubun'.

Page 177/1213 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

• Black Screen after Resume from Sleep (Kubuntu)

  - by user20271

  I know there is a lot of other posts like this, but I have been looking for hours and I still haven't found any solution. I have recently installed Kubuntu Linux along side my Windows 7, the sleep on my Win7 works fine and resumes like normal. When I am loaded into Kubuntu, and I put my laptop to sleep, it goes into sleep as normal. When I go to RESUME from the sleep, the screen stays solid black, it doesn't light up, no blinking curser or anything. The Wi-Fi light is 'off' (orange) and I cannot turn it on. The Caps lock and the Num lock lights on the keyboard blink slowly. I hear something on the inside of the computer start to spin. I am not very experienced with Kubuntu/Linux, but I do know a bunch of computer terminology, I am still far from an expert though. I have about 300GB designated to my Win7 stuff, and another partition with about 100GB for my Kubuntu Linux. My computers specs are as follows: Windows 7 64-bit I have the most recent version of Kubuntu because I just downloaded it a few days ago and updated it yesterday. AMD Athlon Duel-Core processor 4GB of RAM And it is a HP G61 Laptop

  Read the article

• How can one unlock a fully encrypted Ubuntu 11.10 system over SSH at boot?

  - by Jeff

  In previous versions of Ubuntu, and current versions of Debian, you can unlock a fully encrypted system (using dmcrypt and LUKS) at boot time over SSH. It was as easy as: Installing the encrypted system using the Ubuntu alternate installer disk or normal Debian installer disk and choosing to encrypt the system. After the system is installed, adding the dropbear and busybox packages. Updating the initram-fs to authorize your ssh key. At boot time, you'd just ssh to the machine, and do: echo -ne "keyphrase" > /lib/cryptsetup/passfifo The machine would then unlock and boot the encrypted system. Using the exact same steps on Ubuntu 11.10, I can ssh to the machine, but /lib/cryptsetup/passfifo doesn't exist. There appears to be no way to unlock the system over ssh. I'm not sure where to look to see if this functionality changed or if it was removed.

  Read the article

• How to fix the boot loader with an installation disk at hand

  - by Bragboy

  Hi, I recently messed up my Master Boot Record and my system is not booting. I was dual booting Windows and Ubuntu. Both of them are not loading now. I don't care if I lose my windows, but I want my Ubuntu back!! How to get it (I have a fresh Ubuntu 10.10 LTS disk with me). I went through the install wizard but feared that I may loose my existing installation/setup. Thats why I came here to check what is the ideal procedure to only update the Boot record instead of a full installation.

  Read the article

• Not Working Nvidia GT 635M drivers

  - by Andres

  I'm having problems trying to use my Nvidia 635M in my asus N46VJ laptop. I open the "Nvidia X server settings" I get this message : "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server." I open the terminal typi "sudo nvidia-xconf" and this creates a file, /etc/X11/xorg.conf After reboot I'm in a lower resolution of 640x480, without other options to change it, then open the Details system and it shows me this in the Graphic item: Intel® Ivybridge Mobile I type this in the terminal (no idea what that means, I just saw it in a forum!!!) lspci -vnn | grep '\''[030[02]]' and get this: 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 635M] [10de:0de3] (rev a1) (prog-if 00 [VGA controller]) I installed bumblebee but nothings happens additionally the additional drivers shows me "no propietary Drivers are in use on this system"

  Read the article

• Cannot connect to the Internet

  - by Pratap

  My desktop has Broadband wired connection - shows connected, but unable to load any web page in Ubuntu 12.04 but works fine with Windows 7. My laptop - wireless connection shows connected, but again does not load any web page. Please help. On running sudo dhclient eth1 on my laptop there is no result - see the screen output:prajna@LAPTOP:~$ sudo dhclient eth1 [sudo] password for prajna: prajna@LAPTOP:~$ sudo dhclient eth1 [sudo] password for prajna: after giving password - some time later the screen comes back to prajna@LAPTOP:~$

  Read the article

• What is the structure of network managers system-connections files?

  - by Oyks Livede

  could anyone list the complete structure of the configuration files, which network manager stores for known networks in /etc/NetworkManager/system-connections for known networks? Sample (filename askUbuntu): [connection] id=askUbuntu uuid=81255b2e-bdf1-4bdb-b6f5-b94ef16550cd type=802-11-wireless [802-11-wireless] ssid=askUbuntu mode=infrastructure mac-address=00:08:CA:E6:76:D8 [ipv6] method=auto [ipv4] method=auto I would like to create some of them by my own using a script. However, before doing so I would like to know every possible option. Furthermore, this structure seems somehow to resemble the information you can get using the dbus for active connections. dbus-send --system --print-reply \ --dest=org.freedesktop.NetworkManager \ "$active_setting_path" \ # /org/freedesktop/NetworkManager/Settings/2 org.freedesktop.NetworkManager.Settings.Connection.GetSettings Will tell you: array [ dict entry( string "802-11-wireless" array [ dict entry( string "ssid" variant array of bytes "askUbuntu" ) dict entry( string "mode" variant string "infrastructure" ) dict entry( string "mac-address" variant array of bytes [ 00 08 ca e6 76 d8 ] ) dict entry( string "seen-bssids" variant array [ string "02:1A:11:F8:C5:64" string "02:1A:11:FD:1F:EA" ] ) ] ) dict entry( string "connection" array [ dict entry( string "id" variant string "askUbuntu" ) dict entry( string "uuid" variant string "81255b2e-bdf1-4bdb-b6f5-b94ef16550cd" ) dict entry( string "timestamp" variant uint64 1383146668 ) dict entry( string "type" variant string "802-11-wireless" ) ] ) dict entry( string "ipv4" array [ dict entry( string "addresses" variant array [ ] ) dict entry( string "dns" variant array [ ] ) dict entry( string "method" variant string "auto" ) dict entry( string "routes" variant array [ ] ) ] ) dict entry( string "ipv6" array [ dict entry( string "addresses" variant array [ ] ) dict entry( string "dns" variant array [ ] ) dict entry( string "method" variant string "auto" ) dict entry( string "routes" variant array [ ] ) ] ) ] I can create new setting files using the dbus (AddSettings() in /org/freedesktop/NetworkManager/Settings) passing this type of input, so explaining me this structure and telling me all possible options will also help. Afaik, this is a Dictionary{String, Dictionary{String, Variant}}. Will there be any difference creating config files directly or using the dbus?

  Read the article

• Where is /dev/dsp or /dev/audio?

  - by YumYumYum

  I have to apply sudo chmod a+r /dev/dsp or /dev/audio but in my Ubuntu 12.10 i do not have such. Where is then the PCM sound file for ssh? chmod: cannot access `/dev/dsp': No such file or directory chmod: cannot access `/dev/audio': No such file or directory Follow up: http://superuser.com/questions/244173/missing-dev-dsp-under-ubuntu I want to stream the sound output and input. So that i can capture any audio in/out to a file for recording.

  Read the article

• notifyOSD in gnome is not like in Unity

  - by Rodrigo

  tengo dos sistema operativos ubuntu 12.04, con escritorio gnome. En uno, las notificaciones emergentes son como en unity, pero en el otro SO son diferentes, grises, sin transparencia, y también hay que cerrarlas, por lo que quiero que quede la que viene por defecto en Unity en éste gnome también. Si alguie sabe algo sobre estas notificaciones emergentes feas, que por favor, me ayude. Gracias!! Google Traslate: I have two operating system Ubuntu 12.04 with gnome desktop. In one, the pop-up notifications are as in unity, but in the other OS are different, gray, not transparent, and you also have to close them, so I want to make the default one in gnome Unity in this too. If alguie know something about these ugly pop-up notifications, please, help me. Thanks!

  Read the article

• 11.04 radeon screen tearing oddity

  - by Kevin Qiu

  I have a mobility radeon 5850 running 11.04 and am running catalyst 11.10 drivers. I noticed that whenever I have two windows open, one of top of the other, scrolling results in minor screen tearing, usually around the border of the window on the bottom. When I minimize or close the bottom the tearing goes away. I have tear free desktop enabled and tried looking for this specific issue but couldn't find anyone else with it. It happens in both Unity and Classic. Is there any fix for this?

  Read the article

• Unable to Connect to Internet with 3G USB Dongle for Particular ISP

  - by Kush

  I'm using USB 3G Dongle for Internet. Previously I was using Tata Docomo (India) as provider, and the Internet was working fine. Now I've changed to BSNL, but I'm unable to connect to the Internet on Ubuntu. However, I've checked access point settings and other configuration which are required for BSNL, and it is working fine with same Dongle on Windows 7. Also, I'm able to connect Internet with other providers on Ubuntu, but problem persists only with Ubuntu. The access point for BSNL in my region is bsnlnet. In fact I configure the Dongle with BSNL using default Network Configuration wizard that pops up when USB Dongle is attached. When Dongle is attached and configured with BSNL, I can see network strength in Messaging menu, in Mobile Broadband category, of Ubuntu (note: my network icon still shows "not connected" status). And when I try to use the connection that I've created, it fails to connect. So far, I tried using Sakis3g script that I came up with while wandering over this issue on other forums, it didn't worked either. I also made sure that there are no special configuration made for BSNL on my Windows 7 installation, and still it is working fine there, the problem is only with Ubuntu. How can I fix it?

  Read the article

• How to minimize a window using mouse in PCManFM?

  - by Mithun P

  How can I minimize a window using mouse in PCManFM? I'm using Elementary Desktop Environment in Ubuntu 12.04 Update I tried to bring the minimize button back by opening gconf-editor and change the value of /apps/metacity/general/button_layout from close:maximize to close,minimize:maximize. Then I logged out and back in, but that change was simply ignored. Update Again Screenshot And the System settings

  Read the article

• snmpd agent sends duplicate traps

  - by jsnmp

  I am on Ubuntu 10.04.4 LTS, and I cannot upgrade to a higher version. I have installed the snmpd agent (NET-SNMP version 5.4.2.1) with an apt-get install snmpd command. When an event occurs which sends a trap, two traps are sent for each such event instead of one. For example, when I shut down the agent with command /etc/init.d/snmpd stop, two shutdown traps are sent to the destination host. If I then start back up the agent with command /etc/init.d/snmpd start, then two cold start traps are sent to the destination host. Is this a known issue? Is there a fix for this, or is there a configuration change that is needed to prevent the sending of the duplicate trap? These are the contents of the /etc/snmp/snmpd.conf file: rocommunity public authtrapenable 1 trap2sink <trap destination hostname> public These are the contents of the /etc/default/snmpd file: # This file controls the activity of snmpd and snmptrapd # MIB directories. /usr/share/snmp/mibs is the default, but # including it here avoids some strange problems. export MIBDIRS=/usr/share/snmp/mibs # snmpd control (yes means start daemon). SNMPDRUN=yes # snmpd options (use syslog, close stdin/out/err). SNMPDOPTS='-Ls3d -Lf /dev/null -u snmp -p /var/run/snmpd.pid -c /etc/snmp/snmpd.conf' # snmptrapd control (yes means start daemon). As of net-snmp version # 5.0, master agentx support must be enabled in snmpd before snmptrapd # can be run. See snmpd.conf(5) for how to do this. TRAPDRUN=no # snmptrapd options (use syslog). TRAPDOPTS='-Lsd -p /var/run/snmptrapd.pid' # create symlink on Debian legacy location to official RFC path SNMPDCOMPAT=yes

  Read the article

• Graphics performance of 945GME

  - by l0b0

  Edit: Since setting Appearance - Visual Effects up to a stunning "Normal", I now get ~35 FPS in glxgears right after login, with nothing else running :( I'm getting terrible graphics performance in NeverWinter Nights (native with SoU+HotU+CEP2) on my Eee PC 1005HAB. Even with all graphics settings (including the "advanced" ones) at minimum I get about 2-10 FPS, depending on the scene. Firefox is really sluggish as well - Changing tabs often takes a second, scrolling is laggy, and typing this I notice the delay between pressing keys and seeing the text on screen. The rest of the OS is running OK, although general performance seems to be even worse than my old Eee PC 900. glxgears gives about 60 FPS, which is apparently as it should be (synchronized with the monitor refresh rate). Bugs like Launchpad #252094 and the instructions for Reverting the Jaunty Xorg intel driver to 2.4 are old enough that I'm afraid following the instructions would render the system unusable. Are there any tips for improving graphics performance on this system that are still relevant for 10.10? $ uname -a Linux l0b0eee 2.6.35-28-generic #49-Ubuntu SMP Tue Mar 1 14:40:58 UTC 2011 i686 GNU/Linux $ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) $ glxinfo name of display: :0.0 display: :0 screen: 0 direct rendering: Yes server glx vendor string: SGI server glx version string: 1.4 ...

  Read the article

• Macbook Pro 13" Retina (10,2): Keyboard and Touchpad don't work

  - by Dirk

  I'm dealing with Ubuntu since about 5 years and installed it on several laptops. Now I'm stuck when trying to install Ubuntu 12.04.1 on a brand new Macbook Pro 13" Retina (10,2). I sucessfully can start Ubuntu from an USB stick, the Ubuntu desktop is visible, a mouse cursor is visible. But there is no respond to keyboard or touchpad input. So I cannot really install Ubuntu on the Macbook. The details of my approach: Prepare an empty USB stick Download "ISO 2 USB EFI Booter for Mac" and copy the file bootX64.efi to the USB drive as /efi/boot/bootX64.efi. Download Ubuntu 12.04.1 Desktop for Mac from http://cdimage.ubuntu.com/releases/1-amd64+mac.iso and copy the iso the USB drive as /efi/boot/boot.iso Put the USB stick into the Macbook Press and hold the "alt" button while switching the Macbook on Select "EFI Boot" from the boot menu that appears and press the Return / Enter key Immediately a black terminal screen appears with the headline "Welcome to the Ubuntu ISO << - EFI booter". 30 seconds later the familiar Ubuntu startup graphics screen is showing. Further 20 seconds later Ubuntu has started and the desktop is visible - in wonderfully fine resolution Now the computer does not respond to any actions on the touchpad nor the keyboard Who did install Ubuntu on this Macbook Pro 13" Retina (10,2) successfully? On this site https://help.ubuntu.com/community/MacBookPro this unit is not listed yet, anyway. Any help would be greatly appreciated! Dirk

  Read the article

• Why can't I run Compiz?

  - by jasoncruz98

  I installed Ubuntu 11.10 on my laptop. The main reason I switched to Ubuntu is because I wanted to use Compiz. The first thing I did was to go to Additional Drivers and install ATI/AMD Proprietary FGRLX Graphics Driver. There was also another one available, ATI/AMD Proprietary FGRLX Graphics Driver (post-release updates), but I didn't install that one, because it basically meant the same thing to me as the one I already installed. Next, I went to the ubuntuguide.org Oneiric Wiki http://ubuntuguide.org/wiki/Ubuntu:Oneiric#Compiz_Fusion So I followed the instructions there and ran this command in terminal: sudo apt-get install compiz compizconfig-settings-manager compiz-fusion-plugins-main compiz-fusion-plugins-extra emerald librsvg2-common But then, the terminal window said that the package "emerald" could not be found. So, I ran this command instead: sudo apt-get install compiz compizconfig-settings-manager compiz-fusion-plugins-main compiz-fusion-plugins-extra After that, I installed Fusion Icon by running this command: sudo apt-get install fusion-icon I restarted my computer, searched for Compiz Config Settings Manager, and clicked on it. Then, I activated Wobbly Windows. I logged off and logged back on again, but there was no wobbly windows effect. So I tried clicking on Fusion Icon, but it never started. Can someone please tell me what I did wrong here? Because I see everyone seems to be able to run Compiz except me. I really need to start Compiz, or else I think I'm going to uninstall Ubuntu.

  Read the article

• Can't get HP Officejet 6500 card reader to work.

  - by Dennis

  This network (wired) printer works great using the latest HPLIP drivers. However when I plug in an SD card, it just blinks and never shows up mounted anywhere. Has anyone come up with a way to mount these? I'm using Lucid, 10.04. re: version, hp-info says xxxxx@lucid:~$ hp-info HP Linux Imaging and Printing System (ver. 3.10.5) Device Information Utility ver. 5.2 Copyright (c) 2001-9 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Using device: hp:/net/Officejet_6500_E709a?zc=HP05857E

  Read the article

• pdflatex reads .eps files saved in OS/X, but not in Ubuntu

  - by David B Borenstein

  Sorry if this is a stupid question; I'm a newbie. I am preparing a manuscript in LaTeX. The journal (Physical Biology, an IOP publication) requires that figures be saved in .eps format, so I am trying to do that. However, I cannot get my LaTeX file to build when I have generated the .eps files on my Ubuntu computer. If I save the images on my Mac, the file build just fine. So far, I have tried saving images in ImageJ, FIJI and Inkscape. The same problem occurs in all three. When using kile, I get the following error: /usr/share/texmf-texlive/tex/latex/oberdiek/epstopdf-base.sty:0: Shell escape feature is not enabled. In TexWorks, the error is different, but still there: Package pdftex.def Error: File `./figures4/figure4a-eps-converted-to.pdf' not found. Now, if I fire up Inkscape, FIJI or ImageJ on OS/X, everything works fine. The Mac also can't build with the Ubuntu-saved images. The images generated on the Ubuntu machine open fine using Document Viewer. I am building the same LaTeX file on both computers, with the exact same results. The header of my LaTeX file is: \documentclass[12pt]{iopart} \usepackage{graphicx} \usepackage{epstopdf} \usepackage{parskip} \usepackage{color} \usepackage{iopams} And then the code for the figure is: \begin{figure} \center{\includegraphics[width=4in] {./figures4/figure4a.eps}} \footnotesize{\caption{ \label{fig:4a} (4a) lorem ipsum dolor sic amet.}} \end{figure} I'd be happy to send an example of both .eps files. Again, sorry if this is a dumb question. I tried everything I could think of before posting here. Thanks, David

  Read the article

• Apps missing in Software Centre

  - by Hahn Do

  I'm using Elementary OS Luna beta 1, based on Ubuntu 12.04 Precise. I used to used Quantal, as I remember there were roughly 68000 apps. Massive commercial apps, and the banner on top shows new hot apps all the time. Now I switch to Elementary because Compiz sucks with Nvidia. However, Software Centre now only has 41000 apps. No commercial apps, no 3rd party apps. I'm pretty sure I have all the sources enabled: My sources.list: http://paste.ubuntu.com/1396213/

  Read the article

• Samsung NP305U1A laptop won't resume from suspension

  - by Oskar Pålsson

  I just bought a Samsung NP305U1A laptop and installed Ubuntu Desktop 12.04 LTS on it. Whenever I suspend the computer and try to wake it back up, the monitor only shows a black screen and the only thing I can do is a hard reset. Kernel: 3.2.0-24-generic Graphic: Radeon HD 6320 Anybody know what to do? UPDATE I did some some research and remebered that I installed the "ATI/AMD proprietary FGLRX graphics driver" from the "Additional drivers" software bundled in Ubuntu. I also tried to install the "ATI/AMD proprietary FGLRX graphics driver (post-release updates)" but whenever I do, it gives me an error and I can't continue So I decided to make a clean install of Ubuntu 12.04 again and when i tried the suspension out-of-the-box, it did work. But since I can't install the drivers I need, HD video is choppy like hell. So perhaps the suspension bug was fixed in the post-release updates of the driver, but sadly I cannot install them, and I don't know why.

  Read the article

• apt-get install kernel source error

  - by MA1

  apt-get source linux-image-$(uname -r) gives me the below error Reading package lists... Done Building dependency tree Reading state information... Done Picking 'linux' as source package instead of 'linux-image-3.0.0-12-generic' NOTICE: 'linux' packaging is maintained in the 'Git' version control system at: http://kernel.ubuntu.com/git-repos/ubuntu/ubuntu-oneiric.git Skipping already downloaded file 'linux_3.0.0-17.30.dsc' Need to get 99.9 MB of source archives. Err http://pk.archive.ubuntu.com/ubuntu/ oneiric-updates/main linux 3.0.0-17.30 (tar) 500 ( The request was rejected by the HTTP filter. Contact your ISA Server administrator. ) Err http://pk.archive.ubuntu.com/ubuntu/ oneiric-updates/main linux 3.0.0-17.30 (diff) 500 ( The request was rejected by the HTTP filter. Contact your ISA Server administrator. ) Failed to fetch http://pk.archive.ubuntu.com/ubuntu/pool/main/l/linux/linux_3.0.0.orig.tar.gz 500 ( The request was rejected by the HTTP filter. Contact your ISA Server administratorThe request was rejected by the HTTP filter. Contact your ISA Server administrator. ) Failed to fetch http://pk.archive.ubuntu.com/ubuntu/pool/main/l/linux/linux_3.0.0-17.30.diff.gz 500 ( The request was rejected by the HTTP filter. Contact your ISA Server administrator. ) E: Failed to fetch some archives. Can someone suggest a solution?

  Read the article

• python: os.system does not execute shell comand

  - by capoluca

  I need to execute shell command in python program (I have ubuntu). More specifically I want to create graph using graphviz in python script. My code is os.system("dot -Tpng graph.dot -o graph.png") It does not work, but if I just type dot -Tpng graph.dot -o graph.png in command line then everything is fine. Do you know what the problem? Thank you! Edit: Does not work means that nothing happens, there are no errors. Output from dot -v -Tpng graph.dot -o graph.png: dot - graphviz version 2.26.3 (20100126.1600) Activated plugin library: libgvplugin_pango.so.6 Using textlayout: textlayout:cairo Activated plugin library: libgvplugin_dot_layout.so.6 Using layout: dot:dot_layout Using render: cairo:cairo Using device: png:cairo:cairo The plugin configuration file: /usr/lib/graphviz/config6 was successfully loaded. render : cairo dot fig gd map ps svg tk vml vrml xdot layout : circo dot fdp neato nop nop1 nop2 osage patchwork sfdp twopi textlayout : textlayout device : canon cmap cmapx cmapx_np dot eps fig gd gd2 gif gv imap imap_np ismap jpe jpeg jpg pdf plain plain-ext png ps ps2 svg svgz tk vml vmlz vrml wbmp x11 xdot xlib loadimage : (lib) eps gd gd2 gif jpe jpeg jpg png ps svg

  Read the article

• Is having several desktop environments on one account bad?

  - by Joseph_carp

  I have gnome classic, cinnamon, unity, gnome 3, and KDE installed on my only user account because I enjoy a little change from time to time (although my favorite is gnome classic) so I installed all of these desktop environments. I heard from a friend that it could potentially cause some problems. I was also told that it would be okay if I created a separate account for each environment, but I don't want to if I don't have to. Any help is much appreciated, thank you.

  Read the article

• Any spywhere threat due to 3rd party plugins?

  - by DUKE

  I installed the plugin mentioned in the following link and after that, by Ubuntu 12.04 LTS behaves a little strange, particularly keyboard shortcuts are not working as expected. http://www.webupd8.org/2012/03/recoll-lens-full-text-search-unity-lens.html Actual my worry is not about keyboard shortcuts, but are there any spywhere threats by installing 3rd party applications (not through Ubuntu software centre) like that.

  Read the article

• Installing gdm on headless Server Edition

  - by Andrew Koester

  I have Ubuntu Server running on a headless box, which is right now, almost entirely doing only software RAID and feels a little underused. I'd like to get into using Ubuntu as a desktop a little more. What do I need to do (install/etc.) to get Gnome while keeping the box itself headless? I'm not sure which packages to install or which steps to take. I figure I'll just use X over the network (Xming or the like) but something like NX might work.

  Read the article

• help with synclient configuration on an ASUS touchpad

  - by yohbs

  I have recently installed Ubuntu 12.04 on my brand new ASUS K55V. The touchpad behaves weird - two finger tap is interpreted as right-click, click and drag is not working (a double click is needed) and so on. Two finger scrolling (horizontal & vertical) works great. I want the touch pad to behave the "normal" way (that is - like in my old laptop...). I read the synclient documentation and many of the questions posted here, and I can even make some stuff work. Unfortunately, I couldn't figure out how to make these work: Click and drag (that is - physically clicking the button and dragging a finger) Clicking in the right side of the button interpreted as right-click Clicking button with two fingers interpreted as middle-click. specs: The touchpad is equipped with a physical button that clicks. Here's the output of xinput list-props "ETPS/2 Elantech Touchpad" | grep Capabilities: Synaptics Capabilities (294): 1, 0, 1, 1, 1, 1, 1 Any help will be much appreciated.

  Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >