Search Results

Search found 5367 results on 215 pages for 'outlook express'.

Page 177/215 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

  • FreeBSD 8.1 unstable network connection

    - by frankcheong
    I have three FreeBSD 8.1 running on three different hardware and therefore consist of different network adapter as well (bce, bge and igb). I found that the network connection is kind of unstable which I have tried to scp some 10MB file and found that I cannot always get the files completed successfully. I have further checked with my network admin and he claim that the problem is being caused by the network driver which cannot support the load whereby he tried to ping using huge packet size (around 15k) and my server will drop packet consistently at a regular interval. I found that this statement may not be valid since the three server is using three different network drive and it would be quite impossible that the same problem is being caused by three different network adapter and thus different network driver. Since then I have tried to tune up the performance by playing around with the /etc/sysctl.conf figures with no luck. kern.ipc.somaxconn=1024 kern.ipc.shmall=3276800 kern.ipc.shmmax=1638400000 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Required by pf net.inet.ip.forwarding=1 #Network Performance Tuning kern.ipc.maxsockbuf=16777216 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.recvbuf_max=16777216 # Setting specifically for 1 or even 10Gbps network net.local.stream.sendspace=262144 net.local.stream.recvspace=262144 net.inet.tcp.local_slowstart_flightsize=10 net.inet.tcp.nolocaltimewait=1 net.inet.tcp.mssdflt=1460 net.inet.tcp.sendbuf_auto=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.sendspace=262144 net.inet.tcp.recvspace=262144 net.inet.udp.recvspace=262144 kern.ipc.maxsockbuf=16777216 kern.ipc.nmbclusters=32768 net.inet.tcp.delayed_ack=1 net.inet.tcp.delacktime=100 net.inet.tcp.slowstart_flightsize=179 net.inet.tcp.inflight.enable=1 net.inet.tcp.inflight.min=6144 # Reduce the cache size of slow start connection net.inet.tcp.hostcache.expire=1 Our network admin also claim that they see quite a lot of network up and down from their cisco switch log while I cannot find any up down message inside the dmesg. Have further checked the netstat -s but dont have concrete idea. tcp: 133695291 packets sent 39408539 data packets (3358837321 bytes) 61868 data packets (89472844 bytes) retransmitted 24 data packets unnecessarily retransmitted 0 resends initiated by MTU discovery 50756141 ack-only packets (2148 delayed) 0 URG only packets 0 window probe packets 4372385 window update packets 39781869 control packets 134898031 packets received 72339403 acks (for 3357601899 bytes) 190712 duplicate acks 0 acks for unsent data 59339201 packets (3647021974 bytes) received in-sequence 114 completely duplicate packets (135202 bytes) 27 old duplicate packets 0 packets with some dup. data (0 bytes duped) 42090 out-of-order packets (60817889 bytes) 0 packets (0 bytes) of data after window 0 window probes 3953896 window update packets 64181 packets received after close 0 discarded for bad checksums 0 discarded for bad header offset fields 0 discarded because packet too short 45192 discarded due to memory problems 19945391 connection requests 1323420 connection accepts 0 bad connection attempts 0 listen queue overflows 0 ignored RSTs in the windows 21133581 connections established (including accepts) 21268724 connections closed (including 32737 drops) 207874 connections updated cached RTT on close 207874 connections updated cached RTT variance on close 132439 connections updated cached ssthresh on close 42392 embryonic connections dropped 72339338 segments updated rtt (of 69477829 attempts) 390871 retransmit timeouts 0 connections dropped by rexmit timeout 0 persist timeouts 0 connections dropped by persist timeout 0 Connections (fin_wait_2) dropped because of timeout 13990 keepalive timeouts 2 keepalive probes sent 13988 connections dropped by keepalive 173044 correct ACK header predictions 36947371 correct data packet header predictions 1323420 syncache entries added 0 retransmitted 0 dupsyn 0 dropped 1323420 completed 0 bucket overflow 0 cache overflow 0 reset 0 stale 0 aborted 0 badack 0 unreach 0 zone failures 1323420 cookies sent 0 cookies received 1864 SACK recovery episodes 18005 segment rexmits in SACK recovery episodes 26066896 byte rexmits in SACK recovery episodes 147327 SACK options (SACK blocks) received 87473 SACK options (SACK blocks) sent 0 SACK scoreboard overflow 0 packets with ECN CE bit set 0 packets with ECN ECT(0) bit set 0 packets with ECN ECT(1) bit set 0 successful ECN handshakes 0 times ECN reduced the congestion window udp: 5141258 datagrams received 0 with incomplete header 0 with bad data length field 0 with bad checksum 1 with no checksum 0 dropped due to no socket 129616 broadcast/multicast datagrams undelivered 0 dropped due to full socket buffers 0 not for hashed pcb 5011642 delivered 5016050 datagrams output 0 times multicast source filter matched sctp: 0 input packets 0 datagrams 0 packets that had data 0 input SACK chunks 0 input DATA chunks 0 duplicate DATA chunks 0 input HB chunks 0 HB-ACK chunks 0 input ECNE chunks 0 input AUTH chunks 0 chunks missing AUTH 0 invalid HMAC ids received 0 invalid secret ids received 0 auth failed 0 fast path receives all one chunk 0 fast path multi-part data 0 output packets 0 output SACKs 0 output DATA chunks 0 retransmitted DATA chunks 0 fast retransmitted DATA chunks 0 FR's that happened more than once to same chunk 0 intput HB chunks 0 output ECNE chunks 0 output AUTH chunks 0 ip_output error counter Packet drop statistics: 0 from middle box 0 from end host 0 with data 0 non-data, non-endhost 0 non-endhost, bandwidth rep only 0 not enough for chunk header 0 not enough data to confirm 0 where process_chunk_drop said break 0 failed to find TSN 0 attempt reverse TSN lookup 0 e-host confirms zero-rwnd 0 midbox confirms no space 0 data did not match TSN 0 TSN's marked for Fast Retran Timeouts: 0 iterator timers fired 0 T3 data time outs 0 window probe (T3) timers fired 0 INIT timers fired 0 sack timers fired 0 shutdown timers fired 0 heartbeat timers fired 0 a cookie timeout fired 0 an endpoint changed its cookiesecret 0 PMTU timers fired 0 shutdown ack timers fired 0 shutdown guard timers fired 0 stream reset timers fired 0 early FR timers fired 0 an asconf timer fired 0 auto close timer fired 0 asoc free timers expired 0 inp free timers expired 0 packet shorter than header 0 checksum error 0 no endpoint for port 0 bad v-tag 0 bad SID 0 no memory 0 number of multiple FR in a RTT window 0 RFC813 allowed sending 0 RFC813 does not allow sending 0 times max burst prohibited sending 0 look ahead tells us no memory in interface 0 numbers of window probes sent 0 times an output error to clamp down on next user send 0 times sctp_senderrors were caused from a user 0 number of in data drops due to chunk limit reached 0 number of in data drops due to rwnd limit reached 0 times a ECN reduced the cwnd 0 used express lookup via vtag 0 collision in express lookup 0 times the sender ran dry of user data on primary 0 same for above 0 sacks the slow way 0 window update only sacks sent 0 sends with sinfo_flags !=0 0 unordered sends 0 sends with EOF flag set 0 sends with ABORT flag set 0 times protocol drain called 0 times we did a protocol drain 0 times recv was called with peek 0 cached chunks used 0 cached stream oq's used 0 unread messages abandonded by close 0 send burst avoidance, already max burst inflight to net 0 send cwnd full avoidance, already max burst inflight to net 0 number of map array over-runs via fwd-tsn's ip: 137814085 total packets received 0 bad header checksums 0 with size smaller than minimum 0 with data size < data length 0 with ip length > max ip packet size 0 with header length < data size 0 with data length < header length 0 with bad options 0 with incorrect version number 1200 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 300 packets reassembled ok 137813009 packets for this host 530 packets for unknown/unsupported protocol 0 packets forwarded (0 packets fast forwarded) 61 packets not forwardable 0 packets received for unknown multicast group 0 redirects sent 137234598 packets sent from this host 0 packets sent with fabricated ip header 685307 output packets dropped due to no bufs, etc. 52 output packets discarded due to no route 300 output datagrams fragmented 1200 fragments created 0 datagrams that can't be fragmented 0 tunneling packets that can't find gif 0 datagrams with bad address in header icmp: 0 calls to icmp_error 0 errors not generated in response to an icmp message Output histogram: echo reply: 305 0 messages with bad code fields 0 messages less than the minimum length 0 messages with bad checksum 0 messages with bad length 0 multicast echo requests ignored 0 multicast timestamp requests ignored Input histogram: destination unreachable: 530 echo: 305 305 message responses generated 0 invalid return addresses 0 no return routes ICMP address mask responses are disabled igmp: 0 messages received 0 messages received with too few bytes 0 messages received with wrong TTL 0 messages received with bad checksum 0 V1/V2 membership queries received 0 V3 membership queries received 0 membership queries received with invalid field(s) 0 general queries received 0 group queries received 0 group-source queries received 0 group-source queries dropped 0 membership reports received 0 membership reports received with invalid field(s) 0 membership reports received for groups to which we belong 0 V3 reports received without Router Alert 0 membership reports sent arp: 376748 ARP requests sent 3207 ARP replies sent 245245 ARP requests received 80845 ARP replies received 326090 ARP packets received 267712 total packets dropped due to no ARP entry 108876 ARP entrys timed out 0 Duplicate IPs seen ip6: 2226633 total packets received 0 with size smaller than minimum 0 with data size < data length 0 with bad options 0 with incorrect version number 0 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 0 fragments that exceeded limit 0 packets reassembled ok 2226633 packets for this host 0 packets forwarded 0 packets not forwardable 0 redirects sent 2226633 packets sent from this host 0 packets sent with fabricated ip header 0 output packets dropped due to no bufs, etc. 8 output packets discarded due to no route 0 output datagrams fragmented 0 fragments created 0 datagrams that can't be fragmented 0 packets that violated scope rules 0 multicast packets which we don't join Input histogram: UDP: 2226633 Mbuf statistics: 962679 one mbuf 1263954 one ext mbuf 0 two or more ext mbuf 0 packets whose headers are not continuous 0 tunneling packets that can't find gif 0 packets discarded because of too many headers 0 failures of source address selection Source addresses selection rule applied: icmp6: 0 calls to icmp6_error 0 errors not generated in response to an icmp6 message 0 errors not generated because of rate limitation 0 messages with bad code fields 0 messages < minimum length 0 bad checksums 0 messages with bad length Histogram of error messages to be generated: 0 no route 0 administratively prohibited 0 beyond scope 0 address unreachable 0 port unreachable 0 packet too big 0 time exceed transit 0 time exceed reassembly 0 erroneous header field 0 unrecognized next header 0 unrecognized option 0 redirect 0 unknown 0 message responses generated 0 messages with too many ND options 0 messages with bad ND options 0 bad neighbor solicitation messages 0 bad neighbor advertisement messages 0 bad router solicitation messages 0 bad router advertisement messages 0 bad redirect messages 0 path MTU changes rip6: 0 messages received 0 checksum calculations on inbound 0 messages with bad checksum 0 messages dropped due to no socket 0 multicast messages dropped due to no socket 0 messages dropped due to full socket buffers 0 delivered 0 datagrams output netstat -m 516/5124/5640 mbufs in use (current/cache/total) 512/1634/2146/32768 mbuf clusters in use (current/cache/total/max) 512/1536 mbuf+clusters out of packet secondary zone in use (current/cache) 0/1303/1303/12800 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) 1153K/9761K/10914K bytes allocated to network (current/cache/total) 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) 0/8/6656 sfbufs in use (current/peak/max) 0 requests for sfbufs denied 0 requests for sfbufs delayed 0 requests for I/O initiated by sendfile 0 calls to protocol drain routines Anyone got an idea what might be the possible cause?

    Read the article

  • Help with memory usage issues on VPS

    - by Niall Collins
    Hi there, I am running a VPS server with 6 .net web sites/applications running on it. I am having issues with performance on the server, mainly it running out of memory. I contacted the company that lease the server to me and they told me it was because I also had sql server 2008 express also running on the server. So I went ahead and removed this, uninstalled etc. However I still seem to be having issues. For example at present, looking at resource consumption, the virtual memory is: ID: vprvmem Current Use: 894,328,832 bytes Limit: 1,073,741,824 bytes This means useage of ~80%. Is there any way I can check out exactly that applications, web sites, software is taking up most of the servers memory, so I can look at rectifying it. I feel that 80% is much to high to allow for contingency for a spike in traffic. I have got extra memory resources added to the box recently, but I would prefer finding the source of the problem rather than throwing extra memory at it. Maybe these levels are correct and alls running ok, but would like to investigate it to make sure. My knowledge of hardware is limited as I mostly deal in the spectrum of software. So any tools out there that can help me or any pertient advice.

    Read the article

  • ifcf-ethx problem

    - by Shahmir Javaid
    Every time i run service networkd restart This is what i get Shutting down interface eth0: Device state: 3 (disconnected) [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown [ OK ] Bringing up loopback interface: Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown [ OK ] Bringing up interface eth0: ** (process:12951): WARNING **: fetch_connections_done: error fetching user connections: (2) The name org.freedesktop.NetworkManagerUserSettings was not provided by any .service files. Active connection state: activating Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/1 state: activated Connection activated [ OK ] Here is my ifcfg-eth0 # Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller DEVICE=eth0 BOOTPROTO=dhcp DEFROUTE=yes DHCPCLASS= HWADDR=xxx IPV4_FAILURE_FATAL=yes IPV6INIT=no ONBOOT=yes OPTIONS=layer2=1 PEERDNS=yes PEERROUTES=yes TYPE=Ethernet UUID=xxx And my ifcfg-eth1 # Intel Corporation 82541PI Gigabit Ethernet Controller DEVICE=eth1 HWADDR=xxx ONBOOT=no And my ifcfg-lo DEVICE=lo IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 # If you're having problems with gated making 127.0.0.0/8 a martian, # you can change this to something else (255.255.255.255, for example) BROADCAST=127.255.255.255 ONBOOT=yes NAME=loopback Any ideas?

    Read the article

  • Can not access SQLServer database

    - by btrey
    I'm trying to convert an Access database to use a SQLServer backend. I've upsized the database and everything works on the server, but I'm unable to access it remotely. I'm running SQLServer Express 2005 on Windows Server 2003. The server is not configured as a domain controller, nor connected to a domain. The computers I'm trying to access the server from are part of a domain, but there are no local domain controllers. I'm at a remote location and the computers are configured and connected to the domain at the home office, then shipped to us. We normally log in with cached credentials and VPN into the home office when we need to access the domain. I can use Remote Desktop Connection to access the 2k3 server which is running SQLServer. If I log into the server with my username, I can bring up the database, access it via the Trusted Connection, and the database works. If I try to run the database locally, however, I get the Server Login dialog box. I can not use a Trusted Connection because my local login is to the home office domain and is not recognized by the SQLServer machine. If I try to use the username/password that is local to the SQLServer, I get a login failed error. I've tried entering the username as "username", "workgroup/username" (where "workgroup" is the name of the workgroup on the SQLServer), "sqlservername/username" and "[email protected]" where "1.2.3.4" is the IP of the SQLServer. In all cases, I get a login failed error. As I said, I can login to the server via Remote Desktop Connection with the same username and password and use the database, so permissions for the username appear to be correct for both a remote connection and for database access. Not sure where to go from here and any assistance would be appreciated.

    Read the article

  • File in use when it's really not

    - by C-dizzle
    I am running Windows 7 Professional 32 bit on a Server 2008 network. I am getting a weird issue with an excel document where I open it up one morning, update it, save and close, the next morning I come in, open it up and it says "This file is in use and locked by csmith" which "csmith" is me! So I click on the cancel button, open it up again and it comes up fine. I can edit, save and close with no problem. But then have the same issue the next morning. Another weird thing is that we have a calendar shared in "Public Folders" under Outlook that seems to be having the same issue, which happens to be a calendar made in Excel. Exchange 2010 is installed on the server and the clients are using Exchange 2007. In the instance with the calendar, it will show conflicting edits have been made and you must keep one item or all items. And it shows an edit date of 4/24/2012 and 6/1/2012. But, there were NO edits done on 6/1, just tried opening it. This problem does not occur under my profile, but 2 others. These machines are ALSO running Windows 7 Professional 32 bit. We have a mix of Windows 7 and Windows XP machines on our network if that is any help. These issues did not start happening until we migrated from a server running Server 2003 and Exchange 2000, which the new server is running Server 2008 and Exchange 2010 as stated above. Is there something on the server side that is configured wrong?

    Read the article

  • Enable FTP on OS X 10.8 Mountain Lion Server

    - by Oleg Trakhman
    There is a LAN comprising several mac machines (iMac, Mac Pro, macbook etc.), Airport Express router and Mac Mini Server running OS X Server 10.8 (Mountain Lion Server). I need to share a folder on Mac Mini Server by FTP. What did I try so far: Made special partition for FTP Access, call it "Reports" So shared folder would be "/Volumes/Reports" Gave access every user and group in system, and also enabled guest access. I checked posix acl, which is "rwxrwxrwx", I checked sharing settings in "Preferences.app" and "Server.app" Checked that users have access to FTP service Enabled FTP in Server.app I tried access to shared folder (by FTP): via Cyberduck via Finder via shell: ftp server.local And what I got: $ ftp [email protected] Trying 10.0.2.2... Connected to server.local. 220 10.0.2.2 FTP server (tnftpd 20100324+GSSAPI) ready. 331 User ftpuser accepted, provide password. Password: 530 User ftpuser may not use FTP. and $ ftp [email protected] Trying 10.0.2.2... Connected to server.local. 220 10.0.2.2 FTP server (tnftpd 20100324+GSSAPI) ready. 331 User admin accepted, provide password. Password: 530 User admin denied by SACL. ftp: Login failed ftp> (admin is administrator account , ftpuser is special user account made to access ftp) What I'm doing wrong? Getting really tired of this...

    Read the article

  • Windows 7 - User profile corrupted on standby/hibernate

    - by Dogbert
    I have a friend who uses Windows 7 for her home PC. She has a RAID1 array that is using up-to-date Intel Matrix storage drivers, and the entire array is backed up to a separate internal SATA HDD via Acronis True Image every night. Over the weekends, she lets her machine go into suspend after 4 hours of inactivity, and then later into hibernation after 6 hours of inactivity. Her Acronis backup system does nightly incremental backups, and full backups every Saturday night. She also has AVG Free Antivirus installed which does full scans every Monday. So far, on two occasions, on Sunday morning, her user profile is corrupt. I couldn't find any solution that allowed me to repair her profile, so I end up having to (as suggested by MS Knowledge Base, http://windows.microsoft.com/en-us/windows7/fix-a-corrupted-user-profile ;, Yep, no solution to fixing it, just clobber the whole thing) recreating her profile, then copying over data, recreating her Outlook profile, reconfiguring all third-party applications, etc. It's a real nightmare, and takes 4 hours to do each time. Are there any suggestions on how to resolve this profile corruption? This was happening even before the RAID/Acronis solution was in place, but I thought I'd provide as much information as possible.

    Read the article

  • Remote desktop type software that the client need not install anything...

    - by allentown
    I am primarily a Macintosh user, and can usually walk a client though any troubles they may have because I have a Macintosh in front of me. If they are on a different OS, things are close enough, or I cam remember, that I can get by. When trying to help clients on Windows, I get stuck. I do not have access to windows, and even if I did, there are far too many versions of Outlook, all with their various esoteric settings and checkboxes, that I could never see exactly what they are seeing. I mostly need to just help them with email setup. Something like copilot.com may do the trick. What is the simplest remote control software out there, ideally, it would accomplish these: No software needed on remote end, or, a single .exe that they can toss when done. I need Mac based software on my end. I do have ARD, which support VNC Free :) If possible, it would be really nice Needs a port forwarding proxy run by the company. There is no way I can get the user to alter their router, or to even plug directly into their WAN for a short time. On the Mac, I just have them open iChat, and this is all built in, proxying through AIM, looking for the same for Windows and Mac.

    Read the article

  • Why can't I route to some sites from my MacBook Pro that I can see from my iPad? [closed]

    - by Robert Atkins
    I am on M1 Cable (residential) broadband in Singapore. I have an intermittent problem routing to some sites from my MacBook Pro—often Google-related sites (arduino.googlecode.com and ajax.googleapis.com right now, but sometimes even gmail.com.) This prevents StackExchange chat from working, for instance. Funny thing is, my iPad can route to those sites and they're on the same wireless network! I can ping the sites, but not traceroute to them which I find odd. That I can get through via the iPad implies the problem is with the MBP. In any case, calling M1 support is... not helpful. I get the same behaviour when I bypass the Airport Express entirely and plug the MBP directly into the cable modem. Can anybody explain a) how this is even possible and b) how to fix it? mella:~ ratkins$ ping ajax.googleapis.com PING googleapis.l.google.com (209.85.132.95): 56 data bytes 64 bytes from 209.85.132.95: icmp_seq=0 ttl=50 time=11.488 ms 64 bytes from 209.85.132.95: icmp_seq=1 ttl=53 time=13.012 ms 64 bytes from 209.85.132.95: icmp_seq=2 ttl=53 time=13.048 ms ^C --- googleapis.l.google.com ping statistics --- 3 packets transmitted, 3 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 11.488/12.516/13.048/0.727 ms mella:~ ratkins$ traceroute ajax.googleapis.com traceroute to googleapis.l.google.com (209.85.132.95), 64 hops max, 52 byte packets traceroute: sendto: No route to host 1 traceroute: wrote googleapis.l.google.com 52 chars, ret=-1 *traceroute: sendto: No route to host traceroute: wrote googleapis.l.google.com 52 chars, ret=-1 ^C mella:~ ratkins$ The traceroute from the iPad goes (and I'm copying this by hand): 10.0.1.1 119.56.34.1 172.20.8.222 172.31.253.11 202.65.245.1 202.65.245.142 209.85.243.156 72.14.233.145 209.85.132.82 From the MBP, I can't traceroute to any of the IPs from 172.20.8.222 onwards. [For extra flavour, not being able to access the above appears to stop me logging in to Server Fault via OpenID and formatting the above traceroutes correctly. Anyone with sufficient rep here to do so, I'd be much obliged.]

    Read the article

  • Windows 7 taskbar groups to use vertical menus only, not thumbnails?

    - by Justin Grant
    I frequently have 10 or more windows of the same application (e.g. Outlook, Word, IE, etc.) open at one time. Windows 7's new taskbar grouping thumbnail feature shows a preview of open windows (aka thumbnails) when you single-click on the taskbar group for that application. But when I have over 10 windows open (more thumbnails than will fit horizontally on my screen), Windows reverts to a vertical menu. This is disconcerting since I need to train myself to deal with two separate behaviors and can never anticipate what I'm going to see when I click on a taskbar group. Furthermore, I find the thumbnails more difficult to visually scan through (vs. the vertical menu) because only 1-2 words of each window's title are shown. Typically that's not enough text to disambiguate and help me find the right window. I'd like to force Windows 7's taskbar grouping to always show a vertical menu (like in XP) instead of sometimes showing thumbnail previews and sometimes showing a vertical menu. Anyone know how (whether?) this can be done? UPDATE: BTW, I'm running the RTM version (build 7600) of Windows 7. There are apparently other solutions out there which work on earlier builds, but which don't work on the RTM build.

    Read the article

  • How to find the cause of locked user account in Windows AD domain

    - by Stephane
    After a recent incident with Outlook, I was wondering how I would most efficiently resolve the following problem: Assume a fairly typical small to medium sized AD infrastructure: several DCs, a number of internal servers and windows clients, several services using AD and LDAP for user authentication from within the DMZ (SMTP relay, VPN, Citrix, etc.) and several internal services all relying on AD for authentication (Exchange, SQL server, file and print servers, terminal services servers). You have full access to all systems but they are a bit too numerous (counting the clients) to check individually. Now assume that, for some unknown reason, one (or more) user account gets locked out due to password lockout policy every few minutes. What would be the best way to find the service/machine responsible for this ? Assuming the infrastructure is pure, standard Windows with no additional management tool and few changes from default is there any way the process of finding the cause of such lockout could be accelerated or improved ? What could be done to improve the resilient of the system against such an account lockout DOS ? Disabling account lockout is an obvious answer but then you run into the issue of users having way to easily exploitable passwords, even with complexity enforced.

    Read the article

  • Sporadic email delivery to one user

    - by minamhere
    I have a user that occasionally does not receive emails from outside our organization. It does not seem to matter whether the other person is replying to an initial email or sending a new message. I have checked the Exchange System Manager and there is no record of the sender at all during this time period. No record of the message getting captured by the spam software (GFI Mail Essentials). The sender does not receive an NDR or any other indication that the message didn't arrive. It seems to me that these messages are not even getting to our servers at all. But, this is only impacting one user(that I am aware of) and not all the time. Some messages get through without any problem, others just disappear. The senders are not related at all. One is in another country, one uses AOL, one uses a corporate Exchange server locally. I can't seem to find a pattern. Where else can I look to try to figure out where these messages are going/getting captured? Are there additional logs that I can enable either within GFI or Exchange that might shed some light on this? Thanks. We are using Exchange 2003 on Server 2003. Desktop client is Outlook 2003 on Windows XP Pro.

    Read the article

  • Can Subject Alternative Name accommodate multiple virtual mail domains?

    - by Lawrence
    I am currently running a postfix server with self signed certificates serving one mail domain, mycompany.com, the mail server is mail.mycompany.com and so is the CN of the certificate. Now, I need to add a new domain to it. The new domain name is mycompany.net to the same server. Since the users already have the root of the old certificate, I'd like to reuse that. However, I'd like to issue a new certificate so users using the SMTP from Outlook/Thunderbird of mail.mycompany.net do not get warnings. If I understand correctly, if I issue a new certificate with CN=mail.mycompany.com and a subjectAltName=DNS:mail.mydomain.net and have postfix serve this, the client will not complain either way about the cn not matching the target host name. Am I correct in this assumption or am I misunderstanding the concept of Subject Alternative Name? Just to avoid conversation, I do not want to have users on mycompany.net addresses use the mycompany.com server because I might (not a technical issue) have to split up into two different locations, and I want to produce an easily migrateable setup.

    Read the article

  • Debian: What are these files in /sys/devices/pci0000:00/ for?

    - by muhuk
    I am running Debian Squeeze on an MSI M670 laptop. I have these following files on my root drive, each 256MB: file:///sys/devices/pci0000:00/0000:00:05.0/resource1 file:///sys/devices/pci0000:00/0000:00:05.0/resource1_wc Here is my lspci output: muhuk@debian:~$ lspci 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2) 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce Go 6100] (rev a2) 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3) 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 04:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 04:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 04:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 04:09.0 Network controller: RaLink RT2561/RT61 rev B 802.11g I am speculating these have something to do with the shared RAM my GPU is using. But why a file on disk? And why two of them?

    Read the article

  • IIS SSL is taking all IPs although it is told not to

    - by Martin Sall
    I have a testing system where IIS Express on Windows 7 SSL website has to live together with Cerberus FTP server SSL website (Cerberus FTP has a built-in web server for HTTP uploads). I have set up Windows to use two IPs from my router 192.168.1.128 (for IIS SSL Web Site, using a self-generated SSL certificate for now) 192.168.1.129 (for Cerberus FTP built-in SSL Web Site) In IIS I have set web site binding to use only the IP 192.168.1.128. But still when I launch Cerberus, it says - cannot bind 192.168.1.129:443. I tested in Firefox - indeed, when I go to 192.168.1.129 (or even localhost), I do not get “Unable to connect“ page as expected, but “The connection was reset” instead. IIS is still occupying those IPs, although it is not serving the website on those IPs. When I stop the IIS website, Cerberus FTP Website launches without problems. But then I cannot launch IIS web site, it tells - "The process cannot access the file because it is being used by another process". Why is IIS SSL web site still occupying all IPs?

    Read the article

  • Microsoft SQL Server Management Studio causing system freeze

    - by CRoshanLG
    I'm experiencing very slow response from MSSMS and it causes other applications to slow down. Specially Skype crashes after few seconds from opening MSSMS, showing an error called "Disk I/O Error". I'm regularly using few applications (Sublime text, MS Word, Firefox, Outlook, Skype and one or two other apps) simultaneously. The system works fine when MSSMS is not in use! But as soon as MSSMS is opened, all the apps start to freeze (MSSMS also responds very slow). This problem has been there for about a week now (I haven't installed any apps or haven't made any changes to the system during that time). -- System Specifications -- Processor: Core i3 (3.1 GHz) RAM: 4 GB OS: Windows 7 Professional (64 bit) Free space in C drive: ~ 100 GB MS SQL Server 2008 R2 Microsoft SQL Server Management Studio version - 10.50.1600.1 I've tried to find a reason for this but there are no helpful information in the web! There are some solutions suggested (in forums and in Skype Support pages) for the Skypes' "Disk I/O Error", all of which I tried but does not solve the problem. Has anyone faced the same senario? (and hopefully) knows a solution? Systems Log I don't have much knowledge in interpreting the System Log, but I think the Critical and Warnings are not helpful. But there are lots of Error logs which might be useful. In source Kernal-General there are few similar errors saying "An I/O operation initiated by the Registry failed unrecoverably.The Registry could not flush hive (file): <some file>" In source atapi also there are few similar errors -- "The driver detected a controller error on \Device\Ide\IdePort0." (all errors has occurred in 'IdePort0') In Application Error, there are several errors logged, and following is the latest one. Both the Errors which has occurred today is similar (to this one). As it is from Ssms.exe, I guess this is relevant to the cause of problem. But as I said above I can't understand what it means!

    Read the article

  • Are These Parts compatible?

    - by ell
    I have never assembled a PC before, although I have taken an old one apart and replaced a few parts in others here and there so I have (very) limited experience. I have been looking to make a pc and here are the parts I might buy: Foxconn P45AL Intel P45 (Socket 775) DDR2 Motherboard (with onboard sound I believe) Gigabyte GeForce GTX 460 OC 768MB GDDR5 PCI-Express Graphics Card Already have 2 1gb sticks of dual channel DDR2 memory Intel Core 2 Quad Q8400 LGA775 'Yorkfield' 2.66GHz 4MB-cache Processor Samsung SpinPoint F3 1TB SATA-II 32MB Cache Hard Drive Antec Dark Fleet Series DF10 Gaming Enclosure – Black I already have monitor, mouse, keyboard and DVD/CD drive Akasa Freedom Power 1000W Modular Power Supply I have never done this before so feel free to laugh at me for getting something obvious wrong, forgetting a vital component etc. but is all of this compatible? And have I gone overkill on the PSU, if so, please recommend one. Thanks in advance, ell. EDIT: Added PSU which I forgot to mention EDIT: I would be using this to surf the internet, write e-mails, chat, word process, play games such as team fortress 2 & spring rts (at highest graphics hopefully), some 3d modelling in blender, some opengl programming, and image editing in GIMP.

    Read the article

  • Microsoft Word 2007 restarts the installer upon exiting on Windows XP

    - by leeand00
    A user complained that they were having issues with MS Office 2007, and that the installation / configuration dialog kept appearing. I already tried uninstalling Office 2007 and I ended up needing to use the Microsoft Fix It package to uninstall it, since using the control panel failed. I close Microsoft Word. The Installer for Microsoft Office inexplicably opens. I then get a dialog that says I need to reboot. So I restart... Start Microsoft Word, Word starts up, and everything appears to be fine. I close word, and nothing much happens this is on the administrator account. I think everything is fixed so I call the user over to come try their account out. We login as the user, and the user tries to open a document in Word. The Configuration Progress Window reappears. It runs...and then Word appears. I close it and it appears to work, no window. I open it again and the Configuration Progress window appears yet again... Then Word opens up again, if I exit out and open up again I get the same Configuration Progress window. I have no idea what is causing the Configuration Progress Window to come up.. Update: I attempted to install two updates: Update for Microsoft Office Outlook 2007 Junk Email Filter (KB2687400) Update for the 2007 Microsoft Office System (KB967642) Both of these updates failed. Update: I attempted to install KB967642 manually and it failed.

    Read the article

  • Share Exchange Calendar Outside Organization

    - by CalCurious
    I'm trying to figure out the best way to meet a user's (Corp-A-User) request to share their calendar with someone at another company (Corp-B-User). We're running Microsoft SBS 2008 with Exchange 2007 and SharePoint. The remote user is running Exchange, version unknown. Corp-A-User wants to give the Corp-B-User the ability to create appointments on Corp-A-User's calendar. This will naturally require sharing of Free/Busy information. Corp-A-User naturally lacks the vision to seen ANY problem with giving Corp-B-User full access to their calendar. But, I see the problems with that and would prefer that Corp-B-User have only the ability to see Free/Busy and create appointments. Most of the external publishing options that I have thought of, such as WebDav, allow displaying a user's calendar, but there are problems with security and the ability to create appointments. Right now, I'm thinking the cleanest solution would be to use a Google calendar along with Google Calendar Sync for the two user's Outlook clients. But, I'm not sure if there isn't a better way and I hate teh idea of pushing a corporate calendar up to Google. Not to mention the issues likely to pop up from the multiple sync paths. Does any one have a good solution for this scenario that would be willing to share what they use?

    Read the article

  • picking a linux compatable motherboard

    - by Chris
    Last time I bought a new computer (I build them myself) I got a motherboard that had really poor linux support for a long time. Specifically the audio. I had to wait months before the kernel supported the on board audio chipset. That is exactly the situation I'm trying to avoid this time around. I have some specific questions about "server motherboards" actually. I looked at a few models of server motherboards by intel, and some random models on newegg. I wasn't able to see much of a difference from regular desktop motherboard other than most had two sockets, and support for much more ram. These boards seem more popular with Linux users. Why? AMD and Intel both have server CPUs as well. Some question, what's the difference? To make this question more concrete, I was looking at this this motherboard. The main questions about it that I can't answer are: Can I get a motherboard without on board raid and audio? I wanted to get a hardware raid controller and a PCI audio card. I thought a server motherboard would be cheaper and not have these "extras", since who wants an audio card on a server? Where can I found out about Linux support for the components on this board? "Intel ICH10R", "Realtek ALC889", "Marvell 88E8056" I'm buying this computer to work as a Linux desktop for a lot of compiling, coding and audio/video work, but I don't want to rule out the possibility of installing windows and playing some games at one point. (even if the last game I got has been sitting in its box unopened for almost a year). Is it a good idea to buy a "server motherboard" and play games on it, or are desktop boards better value for this? The ultimate solution for me would be a motherboard that had GPL divers for onboard LAN, a single CPU socket, lots of PCI express and PCI. USB 3.0, and no fancy hard disk controllers since I'll be getting a separate one.

    Read the article

  • SATA Driver for Acer Aspire One D257

    - by Robert Niestroj
    i have a Acer Aspire One D257. In this netbook the hard disk is defect so i bought a new one. Now i want to reinstall Windows 7. Im using an external DVD Drive plugged into USB. The Windows 7 DVD is staring, Win7 setup is starting and when it comes to Hard Drive options it says that no drive was detected and i should try search for drivers. It shows me this window: Screenshot from web Now i cant find the right drivers for this netbook to continue with the installation. The laptop has the newest BIOS - 1.15, it is reset to factory default settings except that i enabled the Boot Menu prompt with F12. From the Acer Support Website i've downloaded the SATA AHCI Driver and the Chipset Driver. I unpacked both to a USB flashdrive in seperate folders. When i select the SATA AHCI Driver it does not find any drivers. When i uncheck the checkbox "Hide drivers that are not compatible with hardware on this computer" it shows one driver: Acer HWID (path_to\1.inf). When i continue with this driver i got an error message that says something like: No new devices found. Check if the driver files are on the installation disk. When i show him the Chipset Driver it sees a lot more driver. When i uncheck the checkbox "Hide drivers that are not compatible with hardware on this computer" it show some drivers: Intel N10 Family DMI Bridge Intel N10/ICH7 Family PCI Express Root Port Intel N10/ICH7 SMBUS Controller Intel N10/ICH7 Family USB Universal Host Controller Intel N10/ICH7 Family USB2 Enhanced Host Controller Intel N10/ICH7 Family Interface LPC Controller When i uncheck this checkbox i get a lot more drivers, and some SATA Drivers but the also do not work. I get the same error message as before. Can someone help me find a driver that should work or am i doing anything else wrong?

    Read the article

  • starting oracle database automatically.

    - by Searock
    I am using Fedora 8 and Oracle 10g Express Edition. Every time I start my fedora I have to click on start database. How can I add startdb.sh to startup so that it automatically executes when Fedora starts? I have tried adding the path to /etc/rc.d/rc.local but it still doesn't work. ./usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/startdb.sh I have even tried to add this script in /etc/init.d/oracle #!/bin/bash # # Run-level Startup script for the Oracle Instance and Listener # # chkconfig: 345 91 19 # description: Startup/Shutdown Oracle listener and instance ORA_HOME="/u01/app/oracle/product/9.2.0.1.0" ORA_OWNR="oracle" # if the executables do not exist -- display error if [ ! -f $ORA_HOME/bin/dbstart -o ! -d $ORA_HOME ] then echo "Oracle startup: cannot start" exit 1 fi # depending on parameter -- startup, shutdown, restart # of the instance and listener or usage display case "$1" in start) # Oracle listener and instance startup echo -n "Starting Oracle: " su - $ORA_OWNR -c "$ORA_HOME/bin/lsnrctl start" su - $ORA_OWNR -c $ORA_HOME/bin/dbstart touch /var/lock/subsys/oracle echo "OK" ;; stop) # Oracle listener and instance shutdown echo -n "Shutdown Oracle: " su - $ORA_OWNR -c "$ORA_HOME/bin/lsnrctl stop" su - $ORA_OWNR -c $ORA_HOME/bin/dbshut rm -f /var/lock/subsys/oracle echo "OK" ;; reload|restart) $0 stop $0 start ;; *) echo "Usage: $0 start|stop|restart|reload" exit 1 esac exit 0 and even this doesn't work. startdb.sh is located at /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/startdb.sh Thanks.

    Read the article

  • Word 2003 will not show up in Windows 7

    - by invadersil
    I just installed Windows 7 over the holiday and it went swimmingly well. Today I finished up a few things like installed MS Office 2003. That went well too, until I tried to open up Word. When I try to open up Word on its own, it comes up in the application bar but the application window does not show. I use Word as the editor in Outlook which does work. I also discovered that I can start it up in safe mode and it will work normally. But normal startup just doesn't show me anything. Oddly, if I start typing stuff while the app is selected in the app bar and then try to close it, it pops up a message asking if I want to save it. I tried running the compatibility utility within Windows 7 but still no dice. Has anybody seen this issue yet? The other Office apps start normally. Edit: More info: Windows 7 Pro 64-bit. Office is patched up to SP3. And last time I checked, there were no updates either (and fully updated with KBs after SP3) And I did a fresh install of Windows 7.

    Read the article

  • Building a Web proxy to get around same-origin restrictions for collaborative Webapp based on a MEAN stack

    - by Lew Cohen
    Can anyone point to books, articles, blogs, or even applications - open-source or proprietary - that detail building a Web proxy? This specific proxy will exist to get around the same-origin restrictions that prevent, for instance, loading a given Website into an <iframe> in a Webapp. This Webapp is a collaborative application in which a group of users log in to the app's Website and can then load different Websites into this app's <iframe> and do various collaborative things (e.g., several users simultaneously browsing a Website, in synch). The Webapp itself is built on a MEAN stack (MongoDB, Express, AngularJS, and Node.js). The purpose of this proxy is not to do anonymous browsing or to bypass censorship. Information on how to build such a vehicle seems not to be readily available from my research. I've come across Glype but am not sure whether this is a feasible solution. I don't want to reinvent the wheel, so if a product is available for purchase, great. Else, we'd need to build one. The one that seems to be close is http://www.corsproxy.com. In effect, we'd like to re-create this since it evidently does what's needed. I don't care what server-side technology is used. Our app is MEAN-based, if that has any bearing. Also, the proxy has to obviously honor basic security considerations (user cookies, etc.) and eventually be scalable. So, anyone know of any sources that would detail how to build one of these? Is it even worth building if something already exists? If so, what would be a good candidate? Any other issues that should be considered with this proxy/application? Thanks a lot!

    Read the article

  • Getting Dell E6320 with I7 to work with 3 monitors at 1920x1080p x 3

    - by MadBoy
    I want to buy Dell E6320 which comes with Intel Core I7-2620M (2.70GHz, 4MB cache, Dual Core) with Intel HD Graphics 3000. Laptop will come with docking station. I want to connect 3 monitors to that docking station so that working at home would give me some additional boost. Docking station will allow me to connect only 2 monitors so I'm looking at following other options: Matrox TRIPLEHEAD2GO DIGITAL Edition or TRIPLEHEAD2GO DP Edition. But reading Matrox Support Page intel GPU can't run the highest resolution with 3 monitors connected, it even gets worse since it seems monitors would have to be able to work at 50hz. Also I'm not sure but it seems that Matrox doesn't split the monitors as 3 separate monitors but simply as one big space (which is a bit opposite to what I need) Buy 2 or maybe just 1 USB based monitor but it would also mean having 1 or 2 different monitors then the main one, unless I buy 3 USB based monitors which would mean more money to spend. Also I found only couple of models and most of them require USB 3.0 and no other cables to plug in (nice but costly - couldn't find decent monitor with only USB for sending signal and having power connected normally) . But docking station has only one USB 3.0 port. Can I use hub and still get it to work? Find some converters from Digital to USB (I think DisplayLink does some?) Buy different laptop but what kind? I need it to be I7, small (13"), fast and lightweight. At same time it requires docking station that I can use at home to connect 3 external monitors. Some other suggested solution... Edit: I need 3 monitors for work in terms of coding in Visual Studio or having word/excel/outlook open. Nothing fancy. Maybe some movie once in a while.

    Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >