Search Results

Search found 6258 results on 251 pages for 'power coder'.

Page 177/251 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

• How to reduce the fan noise and how to increase battery life?

  - by mehdi

  I have a brand new Sony Vaio S series laptop.(VPCSA2DGX) It came factory installed with Windows 7 professional Edition 64bit. Runs Intel core i5, 500 GB HDD , 4GB Ram. First I installed ubuntu 11.10 64 bit along side Windows to dual boot. Later,since the problem did not solve, I installed ubuntu 12.04 64bit along side Windows to dual boot. However the problem keeps annoying me. Problem: When running ubuntu 11.10/12.04, the battery lasts only about 1.5 hours. The Fan runs loud and continuously. And there is a lot of heat generated. System monitor shows less than 5% CPU used. My laptop enjoys hybrid graphic and I tried turning off ADM graphic card and keep Intel graphic card on. However I can not get the Fan noise or heat to go away and consequently the battery drain continues. BTW, in windows, the laptop gives 4-5 hours of battery power, Fan is silent and there is no heat problem. Any ideas on how to reduce the fan noise and how to increase battery life in ubuntu 11.10/12.04?

  Read the article

• SharePoint Saturday DC 2010 Slides, Demo Scripts, and Pictures

  - by Brian Jackett

  Wow! This past weekend I attended SharePoint Saturday Washington DC (SPSDC) which was quite an event to say the least.  For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint.  This made my fifth SharePoint Saturday attended and fourth I’ve spoken at.  SPSDC was a bit different than most SharePoint Saturdays mostly due to the scale of it.  We had almost 950 attendees, over 80 speakers presenting close to 90 sessions, and dozens of sponsors.  A big thanks goes out to the organizers of this event.  They put in a lot of hard work and time to pull this event off and should be very proud of the end result.      For SPSDC I presented “The Power of PowerShell + SharePoint 2007”.  I want to thank all of the attendees of my session for coming and asking some great questions.  Below you can find the slides and demo scripts for this session.  I also took some photos throughout the day (not as many as usual since so much going on) so check them out.  If you have any follow up questions feel free to drop me a line in the comments or the contact link at the top of the site.   Slides and Scripts Click here for the demo scripts and slides posted on my SkyDrive. VERY IMPORTANT NOTE: One thing I forgot to mention in my presentation.  In order to run code against the SharePoint API you need to load the Microsoft.SharePoint.dll assembly first.  Run the below command on the PowerShell console line to complete that:   [void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint") Photos Facebook album -or- My album on Windows Live site (higher res shots). View Full Album         -Frog Out

  Read the article

• Lessons From OpenId, Cardspace and Facebook Connect

  - by mark.wilcox

  (c) denise carbonell I think Johannes Ernst summarized pretty well what happened in a broad sense in regards to OpenId, Cardspace and Facebook Connect. However, I'm more interested in the lessons we can take away from this. First  - "Apple Lesson" - If user-centric identity is going to happen it's going to require not only technology but also a strong marketing campaign. I'm calling this the "Apple Lesson" because it's very similar to how Apple iPad saw success vs the tablet market. The iPad is not only a very good technology product but it was backed by a very good marketing plan. I know most people do not want to think about marketing here - but the fact is that nobody could really articulate why user-centric identity mattered in a way that the average person cared about. Second - "Facebook Lesson" - Facebook Connect solves a number of interesting problems that is easy for both consumer and service providers. For a consumer it's simple to log-in without any redirects. And while Facebook isn't perfect on privacy - no other major consumer-focused service on the Internet provides as much control about sharing identity information. From a developer perspective it is very easy to implement the SSO and fetch other identity information (if the user has given permission). This could only happen because a major company just decided to make a singular focus to make it happen. Third - "Developers Lesson" -  Facebook Social Graph API is by far the simplest API for accessing identity information which also is another reason why you're seeing such rapid growth in Facebook enabled Websites. By using a combination of URL and Javascript - the power a single HTML page now gives a developer writing Web applications is simply amazing. For example It doesn't get much simpler than this "http://api.facebook.com/mewilcox" for accessing identity. And while I can't yet share too much publicly about the specifics - the social graph API had a profound impact on me in designing our next generation APIs.  Posted via email from Virtual Identity Dialogue

  Read the article

• There's A Virtual Developer Day in Your Future

  - by OTN ArchBeat

  What are Virtual Developer Days? You really should know this by now. OTN Virtual Developer Days are online events created specifically for developers and architects, with a focus on no-fluff technical presentations, hands-on labs, and expert Q&A to sharpen your technical skills and bring you up to speed on the latest information on Oracle products and practical best practices for their use. The best part about OTN Virtual Developer Days is that you don't have to pack a suitcase or stand in line at an airport waiting for someone pat you down. Instead, you stay where you are, flip open your laptop, and prepare your brain for a massive skills injection. In the next few weeks you'll have two such chances to ramp up your skills. On Tuesday November 5, 2013 Harnessing the Power of Oracle WebLogic and Oracle Coherence will guide you through tooling updates and best practices for developing applications with WebLogic and Coherence as target platforms. This two-track event covers app design and development (Track 1) and building, deploying, and managing applications (Track 2). Each track includes three presentations plus a hands-on lab. [9am-1pm PT / 12pm-4pm ET / 1pm-5pm BRT] Register now This event will also be available in EMEA on December 3, 2013 {9am-1pm GMT / 1pm-5pm GST / 2:30pm-6:30 PM IST] On Tuesday November 19, 2103 Oracle ADF Development: Web, Mobile, and Beyond offers four tracks covering everything from the basics to advance skills for for application development using Oracle ADF and Oracle ADF Mobile. There are three sessions in each track, followed by hands-on labs in which try out what you've learned. [9am-1pm PT / 12pm-4pm ET/ 1pm-5pm BRT] Register now This event will also be available in APAC on Thursday November 21, 2013 [10am-1:30pm IST (India) / 12:30pm-4pm SGT (Singapore) / 3:30pm-7pm AESDT] and in EMEA on Tuesday November 26, 2013 [9am-1pm GMT / 1pm-5pm GST/ 2:30pm-6:30pm IST] Registration for both events is absolutely free. So what are you waiting for?

  Read the article

• The Fantastic New WebLogic on Oracle Database Appliance 2.9 Release is Here!

  - by JuergenKress

  Last week was a big day in virtualised ODA-land as it saw the launch of WebLogic on ODA 2.9. Admittedly it doesn't sound like a very exciting release but it is one that we at O-box have been looking forward to for quite some time. Let me explain why, then we'll look into the details... The ODA X4-2 has 48 Intel Xeon cores. That is a lot of compute power. Whilst the largest O-box SOA Appliance single environment configuration can in theory use all those cores (currently with 40 vCPU of SOA!) the vast majority of O-box users will want smaller configurations. Prior to 2.9 the Oracle WebLogic implementation only supported one domain per ODA, so the conundrum O-box development faced last year was either: offer customers only one SOA environment on their O-box for now (but have the benefit of a standard, easily supportable WebLogic installation), or build our own WebLogic/OTD OVM templates from scratch. One of our driving goals with O-box is to give the best possible experience and make the appliance as supportable as possible. Therefore we took the gamble that we would stick with the Oracle's one-domain WebLogic configuration initially, and just hope that it would deliver multi-domain support for us in a timely manner (note: this is probably not a strategy that business textbooks would recommend!). Anyway, we've been working closely with Oracle Product Management for a few months now and I'm delighted to see 2.9 as the fruits of their labour. This also neatly ties in with several recent requests for O-box to include OSB as well as SOA/BPEL (which we have always wanted to have in separate domains). The diagram below is the neatest way to summarise what the new 2.9 release will allow us to deliver, i.e. previously only one 3D box was possible: Read the complete article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: oBox,WebLogic on ODA,ODA,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Newly installed Ubuntu 12.10 and weird graphics

  - by Benji Marshall

  My machine: 2 GB RAM Intel Pentium Dual core E2180 @ 2 GHz NVIDIA GeForce 6200 LE My friend had recommended Ubuntu to me and I thought I might as well get used to Linux in anticipation for my Raspberry Pi. He said that Wubi was the easiest way to install and I installed it using Wubi. On my first ever boot up of Ubuntu from the Windows Bootloader started normally, and I logged on in a normal fashion, and my desktop loaded normally. I then pressed the Windows key/Power key and everything went wrong. Random lines of yellow and blue appeared on my screen, and changed location when I moved my mouse. The lines stayed for a few seconds and then partially went to I could sort of use my computer. I tried moving my mouse and the entire desktop looked like it broke apart, fragments of it just scatter across my screen at random angles. I could move my mouse and the pointer would move but clicking did nothing. I had to turn off my machine by removing the plug. I would love to get off Windows, but at least the doesn't completely mess up the graphics, and is relatively usable. Please help me solve this....

  Read the article

• MMORPG design for time-limited players

  - by Philipp

  I believe that there is a significant market of players who would enjoy the exploration and interaction aspects of MMORPGs, but simply don't have the time for the endless grinding marathons which are part of the average MMORPG. MMORPGs are all about interaction between players. But when different players have different amounts of time to invest into a game, those with less time to spend will soon lack behind their power-leveling friends and won't be able to interact with them anymore. One way to solve this would be to limit the progress a player can achieve per day, so that it simply doesn't make sense to play more than one or two hours a day. But even the busiest casual players sometimes like to spend a whole sunday afternoon playing a video game. Just stopping them after two hours would be really frustrating. It also creates a pressure to use the daily progress limit every day, because otherwise the player would feel like wasting something. This pressure would be detrimental for casual gamers. What else could be done to level the playing field between those players who play 40+ hours a week and those who can't play more than 10?

  Read the article

• HP Notebook Pavilion g6-2101sl freeze

  - by StErMi

  I just bought this notebook and I've already installed in a new partition Ubuntu 12.04 LTS with 6gb of swap memory. UPDATE2: This is the laptop configuration: http://h10025.www1.hp.com/ewfrf/wc/document?cc=it&lc=it&dlc=it&tmp_geoLoc=true&docname=c03397517 Sometimes (without any special conditions) Ubuntu freezes. My mouse is blocked, the UI is blocked, ALT+F1 to kill something or to restart is blocked, I can't really do anything... I've also tried and it freezes with: Ubuntu 3D Ubuntu 2D Gnome Shell and it freezes both with low and high load. I can only press on power button (physically) and restart my laptop (and this is not the correct way to do things). I'm using this laptop for work, so I need a stable OS without this freeze. Someone knows how to solve this problem? UPDATE: /var/log/messages is empty /var/log/kernel.log - http://paste.ubuntu.com/1220182/ /var/log/Xorg.0.log - http://paste.ubuntu.com/1220186/ I just installed propetary driver from ATI, it crash anyway. This morning I started laptop, I enabled wireless, opened dropbox and chrome - freeze. When it freeze I cannot: Do ctrl+alt+f1 to get console access AltF2 + r to reload session Alt+Print + RESUB to restart I totally freezed.

  Read the article

• Wake laptop when lid is opened?

  - by crackout12

  I have a SAMSUNG laptop, which by the experience in the last months, has been a great one. I am actually implementing some functionality to it, and since I noticed, I am able to wake up my laptop from sleep by just opening the lid on Windows 7, however, I need to press to power button to wake up in Ubuntu. Using a program called i-nex, I noted that the kernel DOES dettect a "lid switch", and I am looking forward to use it to wake up function. Any ideas? UPDATE: Thanks @yossile for bringing up some clues! However, output of command cat /proc/acpi/wakeup does not show the LID device. I still tried the second set of commands you gave me with no effect. Then I tried experimenting, guessing that LID should be named by other value, so I tried enabling the others. No victory so far. But I noticed that devices that did not have any pci listings were disabled at all time no matter what I tried. Here is the output of command cat /proc/acpi/wakeup: root@samsung:~# cat /proc/acpi/wakeup Device S-state Status Sysfs node PCE4 S4 *disabled pci:0000:00:04.0 SBAZ S4 *disabled pci:0000:00:14.2 P0PC S4 *disabled pci:0000:00:14.4 GEC S4 *disabled PE20 S4 *disabled pci:0000:00:15.0 PE21 S4 *disabled PE22 S4 *disabled pci:0000:00:15.2 PE23 S4 *disabled PWRB S5 *enabled So maybe it could be that LID is either GEC,PE21, or PE23? Still, there is /proc/acpi/button/lid/LID/state file which shows that LID is opened. Any more ideas?

  Read the article

• Need Guidance Making HTML5 Canvas Game Engine

  - by Scriptonaut

  So I have some free time this winter break and want to build a simple 2d HTML5 canvas game engine. Mostly a physics engine that will dictate the way objects move and interact(collisions, etc). I made a basic game here: http://caidenhome.com/HTML%205/pong.html and would like to make more, and thought that this would be a good reason to make a simple framework for this stuff. Here are some questions: Does the scripting language have to be Javascript? What about Ruby? I will probably write it with jQuery because of the selecting powers, but I'm curious either way. Are there any great guides you guys know of? I want a fast guide that will help me bust out this engine sometime in the next 2 weeks, hopefully sooner. What are some good conventions I should be aware of? What's the best way to get sound? At the moment I'm using something like this: var audioElement = document.createElement('audio'); audioElement.setAttribute('src', 'paddle_col.wav'); audioElement.load(); I'm interested in making this engine lightweight and extremely efficient, I will do whatever it takes to get great speeds and processing power. I know this question is fairly vague, but I just need a push in the right direction. Thanks :)

  Read the article

• Creating an expandable, cross-platform compatible program "core".

  - by Thomas Clayson

  Hi there. Basically the brief is relatively simple. We need to create a program core. An engine that will power all sorts of programs with a large number of distinct potential applications and deployments. The core will be an analytics and algorithmic processor which will essentially take user-specific input and output scenarios based on the information it gets, whilst recording this information for reporting. It needs to be cross platform compatible. Something that can have platform specific layers put on top which can interface with the core. It also needs to be able to be expandable, for instance, modular with developers being able to write "add-ons" or "extensions" which can alter the function of the end program and can use the core to its full extent. (For instance, a good example of what I'm looking to create is a browser. It has its main core, the web-kit engine, for instance, and then on top of this is has a platform-specific GUI and can also have add-ons and extensions which can change the behavior of the program.) Our problem is that the extensions need to interface directly with the main core and expand/alter that functionality rather than the platform specific "layer". So, given that I have no experience in this whatsoever (I have a PHP background and recently objective-c), where should I start, and is there any knowledge/wisdom you can impart on me please? Thanks for all the help and advice you can give me. :) If you need any more explanation just ask. At the moment its in the very early stages of development, so we're just researching all possible routes of development. Thanks a lot

  Read the article

• Unable to start lightdm but can startx

  - by wzyboy

  I am trying to make my own Live USB and I have successfully generated an ISO file with a newly installed, configured and customized Xubuntu 12.04 LTS installation. My problem is that, no matter I boot the ISO in VirtualBox or in GRUB with loopback, it just cannot start the lightdm. When booting, I can see the log messages on the screen, it stucks at Stopping System V compablities or Configuring Network security. And tty7 is frozen... If I switch to tty1, I can get a logged-in shell as ubuntu@ubuntu. The weird thing is: When I type sudo start lightdm or just sudo lightdm, it will switch to tty7 and the screen flashes. Then nothing happened. Return to tty1 and I can see lightdm running, process xxxx. But the process does not exist. It was just crashed immediately I think. (That's why the screen flashes.) However, when I type startx, I can get into the desktop! That's amazing for me. I am not very clear about the relationship between X Server and Display Manager, but I think lightdm is running when I see the desktop! Then, what's wrong with sudo start lightdm? I use this command every time I power on my laptop since I have a text parameter added in grub.cfg. It never "crashed immediately". I need to use sudo start lightdm because it gets me into "Xubuntu Session" instead of "Xfce Session", the prior is more beautiful... Could anyone help?

  Read the article

• Java Spotlight Episode 88: HTML 5 and JavaFX 2 with Gerrit Grunwalt

  - by Roger Brinkley

  Interview with Gerrit Grundwalt on HTML 5 and JavaFX 2. Joining us this week on the Java All Star Developer Panel is Arun Gupta, Java EE Guy. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link:  Java Spotlight Podcast in iTunes. Show Notes News Java FX 2.1.1 Documentation updated on the docs.oracle.com/javafx website. Lightview: JavaFX 2 real-time visualizer for Glassfish JavaFX Programmatic POJO Expression Bindings (Part 1 & 2) The Enterprise Side of JavaFX - Leverage the power of FX Markup Language to define the UI for enterprise applications Events June 26-28, Jazoon, Zurich, Switzerland Jun 27, Houston JUG July 5, Java Forum, Stuttgart, Germany Jul 13-14, IndicThreads, Delhi July 30-August 1, JVM Language Summit, Santa Clara Feature InterviewGerrit Grunwald is working as a software engineer at Canoo Engineering AG (Basel, Switzerland). He is responsible for visualizations of all kinds. His technical interests include Java desktop development and specifically the subareas - JavaFX, Java Swing and HTML5 controls.He's a decent frequent blogger (http://www.harmonic-code.org), founder and leader of the Java User Group in Muenster (Germany), where he's also living. He has been involved in the IT industry since 1996, when he began to study physics at the University of Applied Sciences Muenster (Germany). Mail Bag What’s Cool Tab Sweep

  Read the article

• Alienware M17x R3: Possible downclock

  - by Ywen

  I installed recently Kubuntu 11.10 32 bits (had graphics driver issues, wanted to try on 32 bits version) on my new Alienware M17x, with a Core i7-2670QM CPU. Cores are supposed to be clocked at 2.2 GHz, however the output of $ cat /proc/cpuinfo | grep -i "hz" gives me: model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 If useful, the AC adapter is plugged in (yet the ouput is the same when the computer is powered only by the battery) and I have Firefox and Eclipse running. Does /proc/cpuinfo reflect a possible automatic downclock made to save power if processor load is low or is this output abnormal? EDIT: Ok, I checked and yes, the ouput does vary in function of the load. I reach 2.2 GHz when needed. But my following problem remains. I was checking my CPU clocking because I experienced poor performances when reading 720p video files on Ubuntu with VLC or mplayer when on battery (and I believe VLC by default only uses CPU, not GPU to decode), whereas I haven't got such problems with VLC on Windows (which made me think it wasn't coming from a BIOS option, plus every option in the BIOS regarding the CPU is turned ON).

  Read the article

• Very Cool &ndash; Miami 311 System for tracking citizen service requests (Windows Azure, Silverlight

  - by Jim Duffy

  Having grown up in South Florida this short, but very enlightening, video explaining how the City of Miami has implemented a 311 citizen service request system using Windows Azure, Silverlight and Bing Maps definitely caught my attention. Miami311 The Miami311 System is a Windows Azure/Silverlight-based solution which enables City of Miami citizens report and track issues reported to city management. The system uses Bing Maps to plot the location and relevant information about each issue reported. Citizens now have the ability to easily see the status of the issue without having to call the city office. What I found interesting were a couple of benefits that a metropolitan area such as Miami can take advantage of in Windows Azure cloud-based solution. For the city of Miami, both benefits center around the weather. Of course the threat of a hurricane is a real issue in South Florida and what better way to make sure your site stays up during a hurricane then to have the site hosted far away from the eye of the storm. Using a Windows Azure cloud-based architecture the City of Miami is able to host the application within the Microsoft data centers safely away from any hurricane passing through South Florida. The second benefit is the inherent scalability of a Windows Azure based solution. During a severe weather event like thunderstorms or even worse, a hurricane, downed trees and power lines are a commonly reported problem. Being able to quickly scale up the computing resources required to handle the spike in citizens reporting these types of problems on the site is a huge benefit. Once the weather event has passed and downed tree reports begin to subside they can quickly reverse the process and scale the system back down to pre-storm levels. It’s kind of day-to-day kind of stuff but very cool stuff nonetheless. Have a day. :-|

  Read the article

• Did something just get borked with glibc/perl/irssi?

  - by Wayne Werner

  I was using irssi about 30 minutes ago now on Ubuntu server 12.04. Everything was perfectly fine and then all of the sudden something happened (my guess is a power failure). The box was restarted. When I logged back in and ran irssi, I got the following: *** glibc detected *** irssi: double free or corruption (out): 0x0000000002085a40 *** ======= Backtrace: ========= /lib/x86_64-linux-gnu/libc.so.6(+0x7e626)[0x7ffc01d87626] irssi(config_node_set_str+0x98)[0x491768] irssi[0x491f12] irssi[0x491e61] irssi(config_parse+0x52)[0x492112] irssi[0x48ab81] irssi(settings_init+0xd1)[0x48bf81] irssi(core_init+0x79)[0x47a849] irssi(main+0xd8)[0x4167e8] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed)[0x7ffc01d2a76d] irssi[0x416b41] ======= Memory map: ======== 00400000-004d0000 r-xp 00000000 08:01 1319015 /usr/bin/irssi 006cf000-006d0000 r--p 000cf000 08:01 1319015 /usr/bin/irssi 006d0000-006dc000 rw-p 000d0000 08:01 1319015 /usr/bin/irssi 006dc000-006dd000 rw-p 00000000 00:00 0 02078000-02099000 rw-p 00000000 00:00 0 [heap] 7ffc0025b000-7ffc00270000 r-xp 00000000 08:01 655404 /lib/x86_64-linux-gnu/libgcc_s.so.1 7ffc00270000-7ffc0046f000 ---p 00015000 08:01 655404 /lib/x86_64-linux-gnu/libgcc_s.so.1 7ffc0046f000-7ffc00470000 r--p 00014000 08:01 655404 /lib/x86_64-linux-gnu/libgcc_s.so.1 7ffc00470000-7ffc00471000 rw-p 00015000 08:01 655404 /lib/x86_64-linux-gnu/libgcc_s.so.1 7ffc00471000-7ffc0073a000 r--p 00000000 08:01 1320172 /usr/lib/locale/locale-archive 7ffc0073a000-7ffc00746000 r-xp 00000000 08:01 655391 /lib/x86_64-linux-gnu/libnss_files-2.15.so 7ffc00746000-7ffc00945000 ---p 0000c000 08:01 655391 /lib/x86_64-linux-gnu/libnss_files-2.15.so 7ffc00945000-7ffc00946000 r--p 0000b000 08:01 655391 /lib/x86_64-linux-gnu/libnss_files-2.15.so 7ffc00946000-7ffc00947000 rw-p 0000c000 08:01 655391 /lib/x86_64-linux-gnu/libnss_files-2.15.so 7ffc00947000-7ffc00951000 r-xp 00000000 08:01 655392 /lib/x86_64-linux-gnu/libnss_nis-2.15.so 7ffc00951000-7ffc00b51000 ---p 0000a000 08:01 655392 /lib/x86_64-linux-gnu/libnss_nis-2.15.so Followed by many more lines. Is there anything I can do to fix this?

  Read the article

• How do I fix a garbled screen on a Gateway LT3103u?

  - by paracaudex

  I've been having garbled screen problems on a Gateway LT3103u on Ubuntu for a while. I just did a fresh install of Ubuntu 11.10 and continue to have issues. I installed xubuntu-desktop in case the issues had to do with the sophisticated GNOME graphics. The problem is less bad, but it's still there. After a few minutes of using XFCE, the screen gets garbled. I assume this has something to do with the graphics card, but I don't know how to go about troubleshooting something like this. Where should I start? Update: Here is the description of the VGA card from lspci -vvv: 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device 028c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- [disabled] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: radeon Kernel modules: radeon Update: Setting GRUB_CMDLINE_LINUX="nomodeset" in /etc/default/grub seems to have fixed it in both Ubuntu and xubuntu-desktop. I will test it for a day or so to see if the problems recur and then post more detail with some links to an explanation. Update 2: It is possible to use this fix for Nvidia card (GTX 260) when graphics is defective after 11.10 upgrade/install? First few restarts was graphic ok, then after few restarts begins suddenly be defective and it stay so. I must returned to 11.04 because this problem and I wait for 12.04. So I hope in this fix.

  Read the article

• Canon MG6100 series USB Printer not mounting

  - by user35201

  Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0

  Read the article

• Is there any way to kill a zombie process without reboot?

  - by Pedram

  Is there any way to kill a zombie process without reboot?Here is how it happens: I wanted to download a 12GB torrent.After adding the .torrent file, transmission turned into a zombie process.I tried ktorrent too.Same behavior.Finally I could download the file using µTorrent but after closing the program, it turns into a zombie as well. I tried using kill skill and pkill with different options and -9 signal but no success. In some answers in web I found out killing the parent can kill the zombie, but killing wine didn't help either. Is there another way? Edit: ps -o pid,ppid,stat,comm PID PPID STAT COMMAND 7121 2692 Ss bash 7317 7121 R+ ps pstree output: init---GoogleTalkPlugi---4*[{GoogleTalkPlug}] +-NetworkManager---dhclient ¦ +-{NetworkManager} +-acpid +-apache2---5*[apache2] +-atd +-avahi-daemon---avahi-daemon +-bonobo-activati---{bonobo-activat} +-clock-applet +-console-kit-dae---63*[{console-kit-da}] +-cron +-cupsd +-2*[dbus-daemon] +-2*[dbus-launch] +-desktopcouch-se---desktopcouch-se +-explorer.exe +-firefox---run-mozilla.sh---firefox-bin---plugin-containe---8*[{plugin-contain}] ¦ +-14*[{firefox-bin}] +-gconfd-2 +-gdm-binary---gdm-simple-slav---Xorg ¦ ¦ +-gdm-session-wor---gnome-session---bluetooth-apple ¦ ¦ ¦ ¦ +-fusion-icon---compiz---sh---gtk-window-deco ¦ ¦ ¦ ¦ +-gdu-notificatio ¦ ¦ ¦ ¦ +-gnome-panel ¦ ¦ ¦ ¦ +-gnome-power-man ¦ ¦ ¦ ¦ +-gpg-agent ¦ ¦ ¦ ¦ +-nautilus---bash ¦ ¦ ¦ ¦ ¦ +-{nautilus} ¦ ¦ ¦ ¦ +-nm-applet ¦ ¦ ¦ ¦ +-polkit-gnome-au ¦ ¦ ¦ ¦ +-2*[python] ¦ ¦ ¦ ¦ +-qstardict---{qstardict} ¦ ¦ ¦ ¦ +-ssh-agent ¦ ¦ ¦ ¦ +-tracker-applet ¦ ¦ ¦ ¦ +-trackerd ¦ ¦ ¦ ¦ +-wakoopa---wakoopa ¦ ¦ ¦ ¦ ¦ +-3*[{wakoopa}] ¦ ¦ ¦ ¦ +-{gnome-session} ¦ ¦ ¦ +-{gdm-session-wo} ¦ ¦ +-{gdm-simple-sla} ¦ +-{gdm-binary} +-6*[getty] +-gnome-keyring-d---2*[{gnome-keyring-}] +-gnome-screensav +-gnome-settings- +-gnome-system-mo---{gnome-system-m} +-gnome-terminal---bash---ssh ¦ +-bash---pstree ¦ +-gnome-pty-helpe ¦ +-{gnome-terminal} +-gvfs-afc-volume---{gvfs-afc-volum} +-gvfs-fuse-daemo---3*[{gvfs-fuse-daem}] +-gvfs-gdu-volume +-gvfsd +-gvfsd-burn +-gvfsd-http +-gvfsd-metadata +-gvfsd-trash +-hald---hald-runner---hald-addon-acpi ¦ ¦ +-hald-addon-cpuf ¦ ¦ +-hald-addon-inpu ¦ ¦ +-hald-addon-stor ¦ +-{hald} +-hotot---xdg-open ¦ +-3*[{hotot}] +-indicator-apple +-indicator-me-se +-indicator-sessi +-irqbalance +-kded4 +-kdeinit4---kio_http_cache_ ¦ +-klauncher +-kglobalaccel +-knotify4 +-modem-manager +-multiload-apple +-mysqld---10*[{mysqld}] +-named---10*[{named}] +-nmbd +-notification-ar +-notify-osd +-pidgin---{pidgin} +-polkitd +-pulseaudio---gconf-helper ¦ +-2*[{pulseaudio}] +-rsyslogd---2*[{rsyslogd}] +-rtkit-daemon---2*[{rtkit-daemon}] +-services.exe---plugplay.exe---2*[{plugplay.exe}] ¦ +-winedevice.exe---3*[{winedevice.exe}] ¦ +-3*[{services.exe}] +-smbd---smbd +-snmpd +-sshd +-timidity +-trashapplet +-udevd---2*[udevd] +-udisks-daemon---udisks-daemon ¦ +-{udisks-daemon} +-upowerd +-upstart-udev-br +-utorrent.exe---8*[winemenubuilder] ¦ +-{utorrent.exe} +-vnstatd +-winbindd---2*[winbindd] +-2*[winemenubuilder] +-wineserver +-wnck-applet +-wpa_supplicant +-xinetd System monitor and top screenshots which show the zombie process is using resources:

  Read the article

• Read-only lock on a SharePoint site collection, or Why can't I edit anymore?

  - by PeterBrunone

  Monday morning, the calls started.  For some reason, long-time users were unable to edit list items.  I figured we had a permissions issue, so I popped in to look at the Site Settings -- and found that I couldn't.  A quick trip to Central Administration showed that I was still listed as a Site Collection Administrator, but I had no power at all on the site collection in question.A quick glance at the logs told me that the server had recently shut down unexpectedly (this is a Hyper-V virtual machine).  Apparently, in the confusion, somehow SharePoint decided to lock the site collection as Read Only.  This can be remedied in one of two ways:1)  In Central Administration, go to Application Management->SharePoint Site Management->Site collection quotas and locks.  Once you have arrived, select the correct application and site collection, and you will have the opportunity to view and set the lock status of the collection (it most likely will be set to "Read-only", and you'll want to move that radio button to "Not locked").2)  Fire up stsadm and issue the following command:stsadm -o setsitelock -url http://myportalsitecollection -lock none

  Read the article

• Specs, Form and Function – What am I Missing?

  - by Barry Shulam

  0 0 1 628 3586 08041 29 8 4206 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Friday October 26th the Microsoft Surface RT arrived at the office.  I was summoned to my boss’s office for the grand unpacking.  If I had planned ahead I could have used my iPhone 4 to film the event and post it on YouTube however the desire to hold the device and turn it ON was more inviting than becoming a proxy reviewer for Engadget’s website.  1980 was the first time we had a personal computer in our house.  It was a  Kaypro computer. It weighed 29 pounds more than any persons lap could hold.  Then the term “portable computer” meant you could remove it from the building and take it else where.  Today I am typing on this entry on a Macbook Air which weighs 2.38 pounds. This morning Amazons front page main title is: “Much More for Much Less” I was born at the right time to start with the CPM operating system on the Kaypro thru the DOS, Windows, Linux, Mac OSX and mobile phone operating systems and languages.  If you are not aware Technology is moving at a rapid pace.  The New iPad (those who are keeping score – iPad4) is replacing a 7 month old machine the New iPad (iPad 3) I have used and owned many technology devices in my life.  The main point that most of the reader who are in the USA overlook is the fact that we are in the USA.  The devices we purchase have a great digital garden to support them.  The Kaypro computer had a 7-inch screen.  It was a TV tube with two colors – Black and Green.  You could see the 80-column screen flicker with characters – have you every played Pac-Man emulated on the screen with the ABC characters. Traveling across the world you will find that not all apps on your device will function as they did back home because they are not offered outside of your country of origin. I think the main question a buyer of technology should be asking is Function.  The greatest Specs with out function limit you.  The most beautiful form with out function is the same as a crystal vase on your shelf – not a good cereal bowl in the morning. Microsoft Surface RT, Amazon Kindle Fire and Apple iPad all great devices in their respective customers hands. My advice for those looking to purchase on this year:  If the device is your only technology device you buy what you WANT and LIKE. Consider this parallel universe if its not your only device?  Ever go shopping for clothing, shoes, and accessories with your wife, girlfriend, sister or mother?  If you listen carefully you will hear the little voices coming out of there heads saying:  “This goes well with that and I can use it also with that outfit” ”Do you think this clashes with that?”  “Ohh I love how that combination looks on you”.  Portable devices such as tablets and computers can offer a whole lot more when they are combined with the digital echo system you have at home and the manufacturer offers online. Pros of each Device: Microsoft Surface RT: There is a new functionality named SmartGlass which will let you share the content off your tablet to your XBOX 360.  Microsoft office is loaded on the tablet.  You can have more than one user profile on the tablet if you share it with others.   Amazon Kindle or Kindle HD: If you are an Amazon consumer with an annual Amazon Prime service you can consume videos and read books off the Amazon site.  Its the cheapest device.  Its a step up from the kindle reader in many ways.   Apple Ipad or Ipad mini: Over 270 Thousand applications.  Airplay permits you the ability to share to your TV screen. If you are a cord cutter (a person who gets their entertainment content over the web or air vs Cable Providers) the Airplay or Smart glass are a huge bonus.  iPad mini or not: The mini will fit in a purse where the larger one will not.  Its lighter which makes it nice to hold for prolonged periods.  It has an option for LTE wireless which non of the other sub 9 inch tables offer.  The screen is non retina which means the applications are smaller.  Speaking with individuals who are above 50 in age that wear glasses they retina does not make a difference for them however they prefer the larger iPad over the new mini.   Happy Shopping this Channuka Season.   The Kosher Coder.   Follow me on twitter @KosherCoder

  Read the article

• Considering Embedding a Database? Choose MySQL!

  - by Bertrand Matthelié

  The M of the LAMP stack and the #1 database for Web-based applications, MySQL is also an extremely popular choice as embedded database. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Access our Resource Kit to discover the top reasons why:   3,000 ISVs and OEMs rely on MySQL as their embedded database 8 of the top 10 software vendors and hundreds of startups selected MySQL to power their cloud, on-premise and appliance-based offerings Leading mobile and SaaS providers ensure continuous service availability and scalability with lower cost and risk using MySQL Cluster. Learn how you can reduce costs and accelerate time to market while increasing performance and reliability. Access white papers, webinars, case studies and other resources in our Resource Kit.  

  Read the article

• How do I prevent my filesystems from being mounted read-only after suspending?

  - by Chas. Owens

  I have Ubuntu 12.04 installed on an SDHC card (only one ext2 partition, no swap). When I suspend using pm-suspend, my root filesystem is mounted read-only. I am currently "fixing" this with the following file: /etc/pm/sleep.d/99_make_disk_rw: #!/bin/sh mount -o remount,rw / But the disk is marked as needing an fsck on reboot. How can I prevent the filesystem from being mounted read-only or whatever is going wrong here. Update: It looks like it is getting mounted read-only because an error occurred. I have changed the mount options for / in /etc/fstab to noatime,nodiratime,errors=continue and it no longer mounts the SDHC card as read-only after it resumes. So the problem is happening when it suspends, not when it resumes as I had thought. I checked /sys/bus/usb/devices/1-4/power/persist and it is set to 1. So the SDHC card shouldn't appear disconnected to the OS (or more accurately it should recover from the disconnection without error). Here seems to be the relevant section of the syslog Sep 10 10:34:23 iubit kernel: [ 748.246226] sd 4:0:0:0: [sdb] Media Changed Sep 10 10:34:23 iubit kernel: [ 748.246234] sd 4:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Sep 10 10:34:23 iubit kernel: [ 748.246243] sd 4:0:0:0: [sdb] Sense Key : Unit Attention [current] Sep 10 10:34:23 iubit kernel: [ 748.246253] Info fld=0x0 Sep 10 10:34:23 iubit kernel: [ 748.246258] sd 4:0:0:0: [sdb] Add. Sense: Not ready to ready change, medium may have changed Sep 10 10:34:23 iubit kernel: [ 748.246271] sd 4:0:0:0: [sdb] CDB: Read(10): 28 00 00 5d 3e f0 00 00 08 00 Sep 10 10:34:23 iubit kernel: [ 748.246291] end_request: I/O error, dev sdb, sector 6110960 Sep 10 10:34:23 iubit kernel: [ 748.247027] EXT2-fs (sdb1): error: ext2_fsync: detected IO error when writing metadata buffers Sep 10 10:34:23 iubit anacron[6954]: Anacron 2.3 started on 2012-09-10 Sep 10 10:34:23 iubit anacron[6954]: Normal exit (0 jobs run) Sep 10 10:34:24 iubit laptop-mode: Laptop mode Sep 10 10:34:24 iubit laptop-mode: enabled, not active Sep 10 10:34:24 iubit kernel: [ 749.055376] sd 4:0:0:0: [sdb] No Caching mode page present Sep 10 10:34:24 iubit kernel: [ 749.055387] sd 4:0:0:0: [sdb] Assuming drive cache: write through Sep 10 10:34:25 iubit anacron[7555]: Anacron 2.3 started on 2012-09-10 Sep 10 10:34:25 iubit anacron[7555]: Normal exit (0 jobs run) Sep 10 10:34:31 iubit kernel: [ 756.090861] EXT2-fs (sdb1): previous I/O error to superblock detected

  Read the article

• Does Hauppauge WinTV HVR-900 (r2) [USB ID 2040:6502] work with ubuntu 12.04 LTS?

  - by nightfly

  I have this DVB+Analog usb tv tuner Hauppauge WinTV HVR-900 (r2) [USB ID 2040:6502]. This used to work under ubuntu 10.04 LTS. But in 12.04 there seems to be a problem. I have linux-firmware-nonfree and ivtv-utils installed. I am running Ubuntu 12.04.1 LTS 64 bit with all updates installed and the default unity environment. When I run mplayer tv:// -tv driver=v4l2:device=/dev/video1:input=1:norm=PAL I get a solid green screen and no picture. Here input 1 is the composite input of the card. MPlayer svn r34540 (Ubuntu), built with gcc-4.6 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing tv://. TV file format detected. Selected driver: v4l2 name: Video 4 Linux 2 input author: Martin Olschewski comment: first try, more to come ;-) Selected device: Hauppauge WinTV HVR 900 (R2) Tuner cap: Tuner rxs: Capabilities: video capture VBI capture device tuner audio read/write streaming supported norms: 0 = NTSC; 1 = NTSC-M; 2 = NTSC-M-JP; 3 = NTSC-M-KR; 4 = NTSC-443; 5 = PAL; 6 = PAL-BG; 7 = PAL-H; 8 = PAL-I; 9 = PAL-DK; 10 = PAL-M; 11 = PAL-N; 12 = PAL-Nc; 13 = PAL-60; 14 = SECAM; 15 = SECAM-B; 16 = SECAM-G; 17 = SECAM-H; 18 = SECAM-DK; 19 = SECAM-L; 20 = SECAM-Lc; inputs: 0 = Television; 1 = Composite1; 2 = S-Video; Current input: 1 Current format: YUYV v4l2: current audio mode is : MONO v4l2: ioctl set format failed: Invalid argument v4l2: ioctl set format failed: Invalid argument v4l2: ioctl set format failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument v4l2: ioctl query control failed: Invalid argument Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory [vdpau] Error when calling vdp_device_create_x11: 1 ========================================================================== Opening video decoder: [raw] RAW Uncompressed Video Movie-Aspect is undefined - no prescaling applied. VO: [xv] 640x480 = 640x480 Packed YUY2 Selected video codec: [rawyuy2] vfm: raw (RAW YUY2) ========================================================================== Audio: no sound Starting playback... v4l2: select timeout V: 0.0 2/ 2 ??% ??% ??,?% 0 0 v4l2: select timeout V: 0.0 4/ 4 ??% ??% ??,?% 0 0 v4l2: select timeout V: 0.0 6/ 6 ??% ??% ??,?% 0 0 v4l2: select timeout v4l2: 0 frames successfully processed, 1 frames dropped. Exiting... (Quit) Here is the dmesg of the card when plugged in.. [12742.228097] usb 1-4: new high-speed USB device number 3 using ehci_hcd [12742.367289] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [12742.367296] em28xx: Audio Vendor Class interface 0 found [12742.367585] em28xx #0: chip ID is em2882/em2883 [12742.550086] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [12742.550104] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [12742.550120] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [12742.550135] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [12742.550150] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12742.550165] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12742.550181] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [12742.550196] em28xx #0: i2c eeprom 70: 32 00 37 00 38 00 32 00 33 00 39 00 30 00 31 00 [12742.550211] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [12742.550226] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [12742.550241] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [12742.550257] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [12742.550272] em28xx #0: i2c eeprom c0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [12742.550287] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [12742.550302] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [12742.550317] em28xx #0: i2c eeprom f0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [12742.550334] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2bbf3bdd [12742.550338] em28xx #0: EEPROM info: [12742.550340] em28xx #0: AC97 audio (5 sample rates) [12742.550343] em28xx #0: 500mA max power [12742.550346] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [12742.552590] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [12742.555516] tveeprom 15-0050: Hauppauge model 65018, rev B2C0, serial# 1292061 [12742.555523] tveeprom 15-0050: tuner model is Xceive XC3028 (idx 120, type 71) [12742.555529] tveeprom 15-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [12742.555534] tveeprom 15-0050: audio processor is None (idx 0) [12742.555537] tveeprom 15-0050: has radio [12742.570297] tuner 15-0061: Tuner -1 found with type(s) Radio TV. [12742.570327] xc2028 15-0061: creating new instance [12742.570332] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [12742.573685] xc2028 15-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [12742.624056] xc2028 15-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [12744.126591] xc2028 15-0061: Loading firmware for type=MTS (4), id 000000000000b700. [12744.153586] xc2028 15-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [12744.280963] Registered IR keymap rc-hauppauge [12744.281151] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc1/input10 [12744.281541] rc1: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc1 [12744.282454] em28xx #0: Config register raw data: 0xd0 [12744.284709] em28xx #0: AC97 vendor ID = 0xffffffff [12744.285829] em28xx #0: AC97 features = 0x6a90 [12744.285832] em28xx #0: Empia 202 AC97 audio processor detected [12744.359211] em28xx #0: v4l2 driver version 0.1.3 [12744.404066] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [12745.915089] MTS (4), id 00000000000000ff: [12745.915100] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [12746.161668] em28xx #0: V4L2 video device registered as video1 [12746.161673] em28xx #0: V4L2 VBI device registered as vbi0 [12746.162845] em28xx-audio.c: probing for em28xx Audio Vendor Class [12746.162848] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [12746.162851] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab [12746.221099] xc2028 15-0061: attaching existing instance [12746.221105] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [12746.221109] em28xx #0: em28xx #0/2: xc3028 attached [12746.221113] DVB: registering new adapter (em28xx #0) [12746.221118] DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)... [12746.221869] em28xx #0: Successfully loaded em28xx-dvb [13111.196055] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13112.720062] MTS (4), id 00000000000000ff: [13112.720072] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13214.956057] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13216.479806] MTS (4), id 00000000000000ff: [13216.479816] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13276.408056] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13277.932093] MTS (4), id 00000000000000ff: [13277.932104] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13305.032076] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13306.556449] MTS (4), id 00000000000000ff: [13306.556460] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13392.236055] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13393.760123] MTS (4), id 00000000000000ff: [13393.760133] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13637.534053] usb 1-4: USB disconnect, device number 3 [13637.534183] em28xx #0: disconnecting em28xx #0 video [13637.560214] em28xx #0: V4L2 device vbi0 deregistered [13637.560335] em28xx #0: V4L2 device video1 deregistered [13637.561237] xc2028 15-0061: destroying instance [13639.772120] usb 1-4: new high-speed USB device number 4 using ehci_hcd [13639.911351] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [13639.911357] em28xx: Audio Vendor Class interface 0 found [13639.911637] em28xx #0: chip ID is em2882/em2883 [13640.094262] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [13640.094280] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [13640.094295] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [13640.094311] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [13640.094326] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [13640.094341] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [13640.094356] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [13640.094371] em28xx #0: i2c eeprom 70: 32 00 37 00 38 00 32 00 33 00 39 00 30 00 31 00 [13640.094386] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [13640.094401] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [13640.094416] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [13640.094432] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [13640.094447] em28xx #0: i2c eeprom c0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [13640.094462] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [13640.094477] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1d b7 [13640.094492] em28xx #0: i2c eeprom f0: 13 f0 74 02 01 00 01 79 63 00 00 00 00 00 00 00 [13640.094509] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2bbf3bdd [13640.094512] em28xx #0: EEPROM info: [13640.094515] em28xx #0: AC97 audio (5 sample rates) [13640.094517] em28xx #0: 500mA max power [13640.094521] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [13640.097391] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [13640.099617] tveeprom 15-0050: Hauppauge model 65018, rev B2C0, serial# 1292061 [13640.099623] tveeprom 15-0050: tuner model is Xceive XC3028 (idx 120, type 71) [13640.099629] tveeprom 15-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [13640.099634] tveeprom 15-0050: audio processor is None (idx 0) [13640.099637] tveeprom 15-0050: has radio [13640.112849] tuner 15-0061: Tuner -1 found with type(s) Radio TV. [13640.112877] xc2028 15-0061: creating new instance [13640.112882] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [13640.115930] xc2028 15-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [13640.164057] xc2028 15-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [13641.666643] xc2028 15-0061: Loading firmware for type=MTS (4), id 000000000000b700. [13641.693262] xc2028 15-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [13641.820765] Registered IR keymap rc-hauppauge [13641.820958] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc2/input11 [13641.821335] rc2: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/rc/rc2 [13641.822256] em28xx #0: Config register raw data: 0xd0 [13641.824526] em28xx #0: AC97 vendor ID = 0xffffffff [13641.825503] em28xx #0: AC97 features = 0x6a90 [13641.825507] em28xx #0: Empia 202 AC97 audio processor detected [13641.899015] em28xx #0: v4l2 driver version 0.1.3 [13641.944064] xc2028 15-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [13643.470765] MTS (4), id 00000000000000ff: [13643.470776] xc2028 15-0061: Loading firmware for type=MTS (4), id 0000000100000007. [13643.717713] em28xx #0: V4L2 video device registered as video1 [13643.717718] em28xx #0: V4L2 VBI device registered as vbi0 [13643.718770] em28xx-audio.c: probing for em28xx Audio Vendor Class [13643.718775] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [13643.718778] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab [13643.777148] xc2028 15-0061: attaching existing instance [13643.777154] xc2028 15-0061: type set to XCeive xc2028/xc3028 tuner [13643.777158] em28xx #0: em28xx #0/2: xc3028 attached [13643.777162] DVB: registering new adapter (em28xx #0) [13643.777167] DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)... [13643.777876] em28xx #0: Successfully loaded em28xx-dvb And here goes the lsmod output lsmod|grep em28xx em28xx_dvb 18579 0 dvb_core 110619 1 em28xx_dvb em28xx_alsa 18305 0 em28xx 109365 2 em28xx_dvb,em28xx_alsa v4l2_common 16454 3 tuner,tvp5150,em28xx videobuf_vmalloc 13589 1 em28xx videobuf_core 26390 2 em28xx,videobuf_vmalloc rc_core 26412 10 rc_hauppauge,ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,em28xx,ir_nec_decoder snd_pcm 97188 3 em28xx_alsa,snd_hda_intel,snd_hda_codec tveeprom 21249 1 em28xx videodev 98259 5 tuner,tvp5150,em28xx,v4l2_common,uvcvideo snd 78855 14 em28xx_alsa,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device Isn't this driver mainline now? Or this card is not supported? Or the analog functionality is screwed? I need the analog capture working for this card. Please help!

  Read the article

• Introduction to the ADF Debugger

  - by Shay Shmeltzer

  Not that you'll ever need this blog entry - after all there are never bugs in the code that YOU write. But maybe one day one of your peers will ask you for help debugging their ADF application so here we go... One of the cool features of JDeveloper and ADF is the ADF Debugger - a way to debug the declarative pars of Oracle ADF. The debugger goes beyond your regular Java debugger and shows you in a clear way specific information related to Oracle ADF - things like where are you in the taskflow/region hierarchy, what is in your various scopes, what is the value of a specific EL and much more. However, from the number of posts on OTN where people are saying "I placed a System.out.println() to see what the value was...", it seems that not many are familiar with the power of the debugger. So here is a short demo that shows you some aspects of the debugger such as: Setting breakpoints on various ADF artifacts The ADF structure window The ADF Data window The EL Evaluater window Want to learn more about debugging ADF applications - I highly recommend that you go back in time to 2009 and attend Steve Muench's OOW presentation about ADF debugging. Can't travel in time yet? Then the second best option is to look at his very clear ADF Debugging Slides, which were the inspiration to the above demo.

  Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >