Search Results

Search found 17427 results on 698 pages for 'sys dm os schedulers'.

Page 177/698 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

• If you develop on multiple operating systems, is it better to have multiple computers + displays?

  - by dan

  I develop for iOS and Linux. My preferred OS is Ubuntu. Now my software shop (me and a partner) is developing for Windows too. Now the question is, is it more efficient to have multiple workstations, one for each target OS? Efficiency and productivity is a higher priority than saving money. I have a 3.4Ghz i7 desktop workstation running Ubuntu and virtualized Windows with two displays, and I'm putting together an even more powerful i7 Hackintosh with 16GB RAM (to replace my weak 2.2Ghz i5 Macbook Pro). My specific dilemma is whether I should sell the first computer and triple boot on the second one, or buy two more displays and run both desktop systems simultaneously. Would appreciate answers from developers who write software for multiple OSes. Running guest OSes in VirtualBox on one system not ideal, because in my experience performance is seriously degraded under virtualization. So the choice is between dual/triple booting on one system vs having two systems, one for OSX+iOS/Windows (dual boot) and the other for Ubuntu (which I prefer to use as my main OS). For much of our work, I write a server-side application in Linux and a client for iOS (or for Windows or OS X) simultaneously.

  Read the article

• Write and fprintf for file I/O

  - by Darryl Gove

  fprintf() does buffered I/O, where as write() does unbuffered I/O. So once the write() completes, the data is in the file, whereas, for fprintf() it may take a while for the file to get updated to reflect the output. This results in a significant performance difference - the write works at disk speed. The following is a program to test this: #include <fcntl.h #include <unistd.h #include <stdio.h #include <stdlib.h #include <errno.h #include <stdio.h #include <sys/time.h #include <sys/types.h #include <sys/stat.h static double s_time; void starttime() { s_time=1.0*gethrtime(); } void endtime(long its) { double e_time=1.0*gethrtime(); printf("Time per iteration %5.2f MB/s\n", (1.0*its)/(e_time-s_time*1.0)*1000); s_time=1.0*gethrtime(); } #define SIZE 10*1024*1024 void test_write() { starttime(); int file = open("./test.dat",O_WRONLY|O_CREAT,S_IWGRP|S_IWOTH|S_IWUSR); for (int i=0; i<SIZE; i++) { write(file,"a",1); } close(file); endtime(SIZE); } void test_fprintf() { starttime(); FILE* file = fopen("./test.dat","w"); for (int i=0; i<SIZE; i++) { fprintf(file,"a"); } fclose(file); endtime(SIZE); } void test_flush() { starttime(); FILE* file = fopen("./test.dat","w"); for (int i=0; i<SIZE; i++) { fprintf(file,"a"); fflush(file); } fclose(file); endtime(SIZE); } int main() { test_write(); test_fprintf(); test_flush(); } Compiling and running I get 0.2MB/s for write() and 6MB/s for fprintf(). A large difference. There's three tests in this example, the third test uses fprintf() and fflush(). This is equivalent to write() both in performance and in functionality. Which leads to the suggestion that fprintf() (and other buffering I/O functions) are the fastest way of writing to files, and that fflush() should be used to enforce synchronisation of the file contents.

  Read the article

• How do I change my PYTHONPATH to make 3,2 my default Python instead of 2.7.2?

  - by max

  I have python3.2 located in /usr/lib/python3.2. I am not sure if that means it's installed but I assume it is for now. Some facts about my system: $ which python /usr/local/bin/python When I type python in terminal I get the following $ python Python 2.7.2 (default, Dec 19 2011, 11:12:13) [GCC 4.4.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. Then to find the path I do >>> sys.info >>> sys.path ['', '/usr/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg', '/usr/local/lib/python2.7/site-packages/pip-1.0.2-py2.7.egg', '/usr/local/lib/python2.7/site-packages/PIL-1.1.7-py2.7-linux-x86_64.egg', '/usr/local/lib/python27.zip', '/usr/local/lib/python2.7', '/usr/local/lib/python2.7/plat-linux2', '/usr/local/lib/python2.7/lib-tk', '/usr/local/lib/python2.7/lib-old', '/usr/local/lib/python2.7/lib-dynload', '/usr/local/lib/python2.7/site-packages'] So knowing all of this, how do I change my default system python from 2.7.2 to 3.2?

  Read the article

• Backup virtual hard disk

  - by Harshil Sharma

  I have a VM created in VMWare Player. It's VHD is currently sized 17 GB, split among multiple 2 GB files. The host OS is Windows 8. I use CrashPlan in host OS for file backup. The problem is, whenever I use the VM, CrashPlan detects all parth of VHD as altered and backs up the 17 GB VHD. WHat I want is a software that can run on host OS (Windows 8), treat the VHD as a physical hard disk and create incremental backups of the VHD, includeing all files, programs and the OS

  Read the article

• Which approach is the most maintainable?

  - by 2rs2ts

  When creating a product which will inherently suffer from regression due to OS updates, which of these is the preferable approach when trying to reduce maintenance cost and the likelihood of needing refactoring, when considering the task of interpreting system state and settings for a lay user? Delegate the responsibility of interpreting the results of inspecting the system to the modules which perform these tasks, or, Separate the concerns of interpretation and inspection into two modules? The first obviously creates a blob in which a lot of code would be verbose, redundant, and hard to grok; the second creates a strong coupling in which the interpretation module essentially has to know what it expects from inspection routines and will have to adapt to changes to the OS just as much as the inspection will. I would normally choose the second option for the separation of concerns, foreseeing the possibility that inspection routines could be re-used, but a developer updating the product to deal with a new OS feature or something would have to not only write an inspection routine but also write an interpretation routine and link the two correctly - and it gets worse for a developer who has to change which inspection routines are used to get a certain system setting, or worse yet, has to fix an inspection routine which broke after an OS patch. I wonder, is it better to have to patch one package a lot or two packages, each somewhat less so?

  Read the article

• How Do I Reset the Library Templates Defaults in Xcode?

  - by sagar

  I was attempting to try to add the [cocos2d] template to Xcode but instead of my iPhone OS templates appearing under the iPhone OS heading it is showing all the Mac OS X templates. (See screenshot). How can I reset this back to the factory defaults?

  Read the article

• How do I remove my Windows 7 setup from a Windows/Ubuntu dual-boot?

  - by Tom

  Previously my OS was Window 7 and some day it began to show problems with booting and finally it didn't boot at all. I tried to repair it but it didn't get repaired. Then I installed Ubuntu 14.04 LTS alongside Windows and am impressed much by Ubuntu. So I want to remove all my Windows files. I searched Google to know how to do it and I found OS-Uninstaller. I have some doubts before proceeding with OS-Uninstaller - I need to keep my photos, songs, movies and personal files in my system even if Windows is removed. Normally Windows files are installed in the C Drive. My personal files are not in the C Drive. So will removing Windows files affect my personal files ? Did the OS-Uninstaller affect Ubuntu anyway ? Please note that I want to remove only the Windows installation files(the files added to my system by Windows during its installation). I don't want to change the NTFS partition to any other format since there is a probability that I will install newer version of Windows later.

  Read the article

• iMac boot from linux partition on external drive

  - by user74757

  I have the following "setup:" iMac (no internal drive/dead) --------- (Firewire) ------- [[MAC OS X]] | | | | (USB) | | | | [[MISC STORAGE PARTITION] [MISC STORAGE PARTITION] [EXT2 UBUNTU PARTITION]] I routinely use the firewire drive to boot MAC OS X. However, I would like to boot from the linux partition of the USB drive. This linux partition had linux installed on it from a live cd, and during that process, I told the installer to install GRUB on the usb drive (which happened to be /dev/sdd). My question is, how do I get this disk to show up during the iMac option-boot? Currently, only the firewire MAC OS X option shows up. I have read about rEFIT, but that appears to install it to the Mac OS X disk (would that still work?)... Also mentioned was installing rEFIT to the internal EFI system partition, but I don't know if that is wise.

  Read the article

• Macbook Pro late 2011 screen brightness issue

  - by buchzumlesen

  The keys to set the screen brightness work properly but everytime I reboot, the screen brightness is reverted to 100%, which is very annoying. I've already tried to add the following lines to /etc/rc.local but with no success (only the keyboard backlight stays off): #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. echo '1' > /sys/devices/platform/applesmc.768/leds/smc::kbd_backlight/brightness echo '6' > /sys/class/backlight/acpi_video0/brightness rfkill block bluetooth exit 0` This worked for me when I was using Ubuntu 12.04 and also did after the upgrade to 12.10 but then after rebooting the screen brightness always reverted to 100%. Would be nice if anyone knows how to fix this. My device: Macbook Pro 13" Late 2011 Thanks in advance!

  Read the article

• Why can't I boot from portable HD?

  - by user11239

  I've been trying to get Ubuntu 10.04-LTS 32-bit desktop installed onto a 250GB FreeAgent Go drive from Seagate. I've been able to install onto a USB flash drive and boot successfully from this. I have installed Ubuntu onto the jump drive using Universal USB Installer, and this was a total success in terms of getting Ubuntu to run off a flash drive. I was unable to accomplish this with the portable HDD. I then, following instructions, attempted to install the OS onto the HDD once booted up from the flash drive. After installing the OS on the HDD, the computer would simply not load the OS when the HDD medium was selected for booting from. However, as there is no System-> Preferences-> Removable Drives and Media I could not complete this step. Is this vital? How do I do this under Ubuntu 10.04? I have formmated the MBR on the HDD and repeated the above, still with no success. I have also browsed some forums that mention there may be something related to spin-up speeds, but nothing explained in detail the issue or how to solve it, and I'm not familiar enough with system booting to understand if this could be an issue. Basically, what I'm trying to do is get Ubuntu to boot off the HDD, I've attempted several things, and the result is, after selecting the HDD from BIOS, the OS never starts booting (after waiting upwards of ten minutes). I just have a white cursor blinking. I can always get it to boot from the jump drive. Related question

  Read the article

• First frame has a much longer delta time than other frames

  - by Kipras

  I had a problem where my AI moved extreme at the first frame and then normal after that. I then figured out it was my delta. It's about 0.016 seconds (60 fps), but the first frame was about 19000 seconds, which is obviously impossible. Does anybody know what might be happening? Also the delta later on likes to oscillate from 0.01 to 0.03, which is, again, crazy. long time = Sys.getTime() * 1000 / Sys.getTimerResolution(); float delta = (time - lastFrame) / 1000f; lastFrame = time; return delta; That's the delta code.

  Read the article

• Control external monitor brightness

  - by remi

  Hello Ubuntu community, I can control the brightness of my DELL U2713HM connected with DisplayPort via the command: ddccontrol -p -r 0x10 -w 53 where in this example the number 53 represents the brightness level (range 0 to 100). But I don't know how to link the command to my brightness keys on my keyboard. I searched already, but just found answers to integrated laptop screens. In /sys/class/backlight is the folder acpi_video0 with some subfolders and files. The file actual_brightness contains a number from 0 to 20, which is changing when I press the brightness keys. How do I get my external monitor listed as a device in /sys/class/backlight ? PS: I am running a fresh Ubuntu 12.10 install with integrated graphics Intel HD4000.

  Read the article

• Brightness fn key adjustment problems

  - by npCoder

  My brightness function key controls work after setting grub boot parameter to "acpi_osi=" but using them I cannot adjust the brightness higher than around 70% (there is empty bar left over and I can't adjust higher) unless I go to Brightness & Lock settings manually than I can use the slider to adjust it higher... I primarily use intel_backlight to adjust my backlight and I am running Linux kernel 3.14.1 on Ubuntu 14.04 LTS on an ASUS X550LA Laptop when I try: cd /sys/class/backlight/intel_backlight cat max_brightness 937 cat brightness 811 It seems that I can only adjust to a maximum of 811 using the fn brightness controls If I instead do cd /sys/class/backlight/acpi_video0 cat max_brightness 10 cat brightness 4 cat actual_brightness 10 With the FN keys actual_brightness is not equal to the value returned from brightness on acip_video0 (which is always 4) but on intel_backlight actual_brightness = brightness The adjustment problem seemingly arises because both intel_backlight and acpi_video0 are trying to adjust brightness

  Read the article

• Virtual Box, full screen ?

  - by Arkapravo

  Hi How can I get Virtual Box go full screen, as of now I am getting my guest OS in a small screen (640 x 480) type, even 'going full screen' doesn't make any difference ? I want my guest OS to be of same screen size as my host OS ! Regards

  Read the article

• How do you change brightness, color and sharpness from command line?

  - by YumYumYum

  I am controlling my PC with SSH and scripting. How can i change the brightness, color and sharpness from command line? Try 1: failed $ sudo redshift -t 5000:5000 -g .5 Cannot list GNOME panel applets. Initialization of gnome-clock failed. Trying next provider... Latitude and longitude must be set. Try 2: failed $ cat brightness 20 $ cat max_brightness 20 $ echo 1 | sudo tee /sys/class/backlight/acpi_video0/brightness 1 $ echo 20 | sudo tee /sys/class/backlight/acpi_video0/brightness Any alternative way to do? Follow up: http://jonls.dk/redshift/ [command] [1000K to 10000K] [effects 0.1 to 10.0] | | / / / ^ ^ ^ ^ ^ redshift -t 1000:1000 -l 0:0 -g .1; Dark redshift -t 1000:1000 -l 0.0 -g 5; Bright

  Read the article

• Screen brightness dull after upgrade to Ubuntu 14.04

  - by user288426

  After upgrading to Ubuntu 14.04 I found that I could not increase screen brightness. I'm using a Samsung NC110 netbook. Initially the function key to modify brightness did not respond at all. After implementation of the first part of the fix, the key came alive and the brightness bar could be modified. Yet at maximum brightness indicated the screen still remained very dull. The 2nd part of the fix cures that problem, at least for this type of machine. First part of the fix was copied and modified in line with my experience from following post: How to control Brightness Open a terminal (Ctrl + Alt + T). Then type sudo nano /etc/default/grub. It will ask for your password. Type it in. Around the 11th line, there will be something like: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash". Change it to: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor" Save the file by Ctrl+O followed by Ctrl+X. Then run sudo update-grub in the terminal. Reboot and see if backlight adjustment works. Then I needed to modify the rc.local file. Therefore read below fix to understand the procedure: problem with adjusting brightness Ubuntu 14.04 In my case I had 2 folders listed under /sys/class/backlight which were: intel_backlight samsung I realized that the samsung folder is governing. I had to modify the check for max brightness to: cat /sys/class/backlight/samsung/max_brightness In my case the max value obtained is 8. Besides putting this into rc.local, I also had to uncomment the first line to get this working. My rc.local under /etc/ now looks as follows: !/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. echo 8 > /sys/class/backlight/samsung/brightness exit 0 Now I can modify brightness on my netbook and also can get the screen up to its maximum brightness. Hope this is helpful.

  Read the article

• Why am I missing 4GB of RAM on Windows Server 2008 R2 64bit?

  - by Nick G

  I noticed today that a server was very low on memory. It physically has 8GB installed and runs Windows 2008 R2 Standard 64bit. It also hosts 2 virtual machines using HyperV. Server is Dell Poweredge R510. However the host OS reports in task manager that it only has 4GB of RAM, despite actually having 8GB and it being a 64bit OS. Computer properties shows Installed memory: 8.00GB (3.99GB usuable). Why would "usable" be half the real RAM installed under a 64bit OS? Additionally nearly all of the 4GB of visible RAM on the host OS is being used by something without anything showing up in task manager (presumably HyperV as it's allocated 3.6GB to the virtual machines its hosting). However that doesn't explain where the other 4GB has gone which Windows can't even see. Where is my missing 4GB of RAM? Update: Dell OpenManage says this: Total Installed Capacity 8192 MB Total Installed Capacity Available to the OS 4096 MB So looks like Nathan's suggestion of memory mirroring might be correct. I'll have to reboot to check this (I think?) Update 2 OK. So I reboot and I get a message saying "the amount of system memory has changed" (despite not having touched the hardware in a year). Once Windows has booted, all 8GB is visible again. Looks like I probably have a hardware RAM issue (I'll perhaps try reseating it whenever I can chuck everyone off the server next). Thanks for your answers and comments. I was hoping it was going to be the mirrored-RAM option but it seems not - that's not even mentioned in the BIOS.

  Read the article

• OpenVPN IPv6 over IPv4 tunnel

  - by user66779

  Today I installed OpenVPN 2.3rc2 on both my windows 7 client machine and centos 6 server. This new version of OpenVPN provides full compatibility for IPv6. The Problem: I am currently able to connect to the server (through the IPv4 tunnel) and ping the IPv6 address which is assigned to my client and I can also ping the tun0 interface on the server. However, I cannot browse to any IPv6 websites. My vps provider has given me this: 2607:f840:0044:0022:0000:0000:0000:0000/64 is routed to this server (2607:f840:0:3f:0:0:0:eda). This is ifconfig after setup with OpenVPN running: eth0 Link encap:Ethernet HWaddr 00:16:3E:12:77:54 inet addr:208.111.39.160 Bcast:208.111.39.255 Mask:255.255.255.0 inet6 addr: 2607:f740:0:3f::eda/64 Scope:Global inet6 addr: fe80::216:3eff:fe12:7754/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2317253 errors:0 dropped:7263 overruns:0 frame:0 TX packets:1977414 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1696120096 (1.5 GiB) TX bytes:1735352992 (1.6 GiB) Interrupt:29 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 inet6 addr: 2607:f740:44:22::1/64 Scope:Global UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:739567 errors:0 dropped:0 overruns:0 frame:0 TX packets:1218240 errors:0 dropped:1542 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:46512557 (44.3 MiB) TX bytes:1559930874 (1.4 GiB) So OpenVPN is sucessfully creating a tun0 interface and assigning clients IPv6 addresses using 2607:f840:44:22::/64. The first client to connect is getting 2607:f840:44:22::1000 and the second 2607:f840:44:22::1001, and so on... plus 1 each time. After connecting as the first client, I can ping from my windows client machine 2607:f740:44:22::1 and 2607:f740:44:22::1000. However, I have no access to IPv6 websites. I believe the problem is that the tun0 IPv6 addressees are not being forwarded to the eth0 interface. This is the firewall running on the server: #!/bin/sh # # iptables configuration script # # Flush all current rules from iptables # iptables -F iptables -t nat -F # # Allow SSH connections on tcp port 22 # iptables -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -j ACCEPT # # Set access for localhost # iptables -A INPUT -i lo -j ACCEPT # # Accept connections on 1195 for vpn access from client # iptables -A INPUT -i eth0 -p udp --dport 1195 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 1195 -m state --state ESTABLISHED -j ACCEPT # # Apply forwarding for OpenVPN Tunneling # iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to 209.111.39.160 iptables -A FORWARD -j REJECT # # Enable forwarding # echo 1 > /proc/sys/net/ipv4/ip_forward # # Set default policies for INPUT, FORWARD and OUTPUT chains # iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT # # IPv6 # IP6TABLES=/sbin/ip6tables $IP6TABLES -F INPUT $IP6TABLES -F FORWARD $IP6TABLES -F OUTPUT echo -n "1" >/proc/sys/net/ipv6/conf/all/forwarding echo -n "1" >/proc/sys/net/ipv6/conf/all/proxy_ndp echo -n "0" >/proc/sys/net/ipv6/conf/all/autoconf echo -n "0" >/proc/sys/net/ipv6/conf/all/accept_ra $IP6TABLES -A INPUT -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT $IP6TABLES -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT $IP6TABLES -A INPUT -i eth0 -p icmpv6 -j ACCEPT $IP6TABLES -P INPUT ACCEPT $IP6TABLES -P FORWARD ACCEPT $IP6TABLES -P OUTPUT ACCEPT Server.conf: server-ipv6 2607:f840:44:22::/64 server 10.8.0.0 255.255.255.0 port 1195 proto udp dev tun ca ca.crt cert server.crt key server.key dh dh2048.pem ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" keepalive 10 60 tls-auth ta.key 0 cipher AES-256-CBC comp-lzo user nobody group nobody persist-key persist-tun status openvpn-status.log log-append openvpn.log verb 5 Client.conf: client dev tun nobind keepalive 10 60 hand-window 15 remote 209.111.39.160 1195 udp persist-key persist-tun ca ca.crt key client1.key cert client1.crt remote-cert-tls server tls-auth ta.key 1 comp-lzo verb 3 cipher AES-256-CBC I'm not sure where I am going wrong, it could be the firewall, or something missing from server or client.conf. This version of OpenVPN was only released yesterday, and there's little info on the internet about how to setup an IPv6 over IPv4 vpn tunnel. I've read the manual for this new version of OpenVPN (parts pertaining to IPv6) and it provides very little info too. Thanks for any help.

  Read the article

• C# XNA 2D Multiple boxes collision detection and movement

  - by zini

  Hi, I've been making simple game where you shoot boxes that are coming towards you. All game objects are simple rectangles. Now I have problem with collision detection; how to check where the collision comes so I can change the coordinates right? I have this kind of situation: http://imgur.com/8yjfW Imagine that all of those blocks are moving towards you (green box). If those orange boxes collide with each other, they should "avoid" themselves and not go through each other. I have class Enemy which has properties x, y and such. Now I'm doing the collision like this: // os.Count is an amount of other enemies colliding with this enemy if (os.Count == 0) { // If enemy doesn't collide with other enemy lasty = y; lastx = x; slope = (x - player.x) / (y - player.y); x += slope * l; // l is "movement speed" of enemy (float) if (y > player.y) { y = lasty; } else if (y < player.y) { y += l; } } else { foreach(Enemy b in os) { if (b.y > this.y) { // If some colliding enemy is closer player than this enemy, that closer one will be moved towards the player b.lasty = b.y; if (!BiggestY(os)) { // BiggestY returns true if this enemy has the biggest Y b.y += b.l; } b.x = b.lastx; } } } But this is very, very bad way to do this. I know it, but I just can't figure out other way. And as a matter in fact, this method doesn't even work pretty good; if multiple enemies are colliding same enemy they go through each other. I explained this pretty badly, but I hope that you understand this. And to sum up, as I said: How to check where the collision comes so I can change the coordinates right?

  Read the article

• vga_switcheroo and Intel HD 3000 on Ubuntu 12.04

  - by Ikalou

  I'm trying to get vga_switcheroo to enable my integrated Intel HD 3000 instead of my ATI card. My problem is that there is no vgaswitcheroo directory in /sys/kernel/debug/ on my system. > grep -i switcheroo /boot/config-3.2.0-26-generic CONFIG_VGA_SWITCHEROO=y And yet: > sudo ls /sys/kernel/debug/ acpi bdi bluetooth dri extfrag gpio ieee80211 kprobes mce mmc0 regmap regulator sched_features suspend_stats tracing usb wakeup_sources x86 I am NOT using the fglrx driver. Here is the output of lspci; glxinfo | grep renderer: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Seymour [Radeon HD 6400M Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Caicos HDMI Audio [Radeon HD 6400 Series] 24:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (rev 30) 24:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30) 24:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) 25:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 26:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) OpenGL renderer string: Gallium 0.4 on AMD CAICOS Both xserver-xorg-video-intel and xserver-xorg-video-radeon packages are installed. I know there are tons of posts about hybrid-graphics already but I couldn't quite find a solution to my problem. Does anyone know why is /sys/kernel/debug/vgaswitcheroo not showing?

  Read the article

• copying same file name from client to server using tcp protocol with same size of file

  - by user3686570

  This is the client and server program where a client sends a file to server to save in the server. There is a issuse in that same file name is not getting copied on the server with same file size Please help me in this Client program import socket import sys s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.connect(("localhost",9999)) path=raw_input("Please enter the complete PATH of your file : ") f=open (path, "rb") l = f.read(256) while (l): s.sendall(l) l = f.read(10000) s.close() Server Program import socket import sys s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.bind(("localhost",9999)) s.listen(10) while True: s, address = s.accept() print address i=1 f = open( str(i),'wb') #open in binary #i=i+1 while (True): l=s.recv(256) #while (l): f.write(l) l=s.recv(256) print 'File recieve succesfully' f.close() #sc.close() s.close() Thanks in advance

  Read the article

• Unable to do Port Forwarding in Virtual Box

  - by dewbot

  I'm using Mac OS X 10.6. I have installed Virtual Box 4.1.0 in it. My Guest OS is Ubuntu Server 11.04. I have added a rule in Port Forwarding in Virtual Box - "guestssh" TCP 127.0.1.1 8080 127.0.0.1 1337 Inside Guest OS I'm running nodejs server. Code is nothing but simple helloworld code found on their site http://nodejs.org/. In short I'm running server on 127.0.0.1 on 1337 Port. Now according to rule I have given, from Host Machine all the requests for 127.0.1.1:8080 should be forwarded to 127.0.0.1:1337 of Guest OS. From Host I'm doing curl http://127.0.1.1:8080 and I'm getting curl: (7) couldn't connect to host Is there something am I doing wrong? Note- Don't give me suggestion to do ssh n all. As my ISP does not provide Internal LAN so its not possible in my case. All I can do it Port Forwarding.

  Read the article

• Computer won't wake from hibernate

  - by Icoo

  So I have a pretty dumb problem...I accidentaly pressed Hibernate while trying to Restart...since then my computer wont boot into Ubuntu anymore (through normal mode or single user mode - rescue mode that is)...all I get is: mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys/ on root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or dirctory Target filesystem doesn't have requested /sbin/init. No init found. Try passing init= boot arg. BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Obviously I tried to fire up the Live CD and run fsck (or e2fsck) from there (or just try to do a Check of /dev/sdb1 my partition via gparted - which is basically the same thing). But it doesn't allow me...both gparted and fsck say that the device is busy (I can't even mount it in the LiveCD to rescue data)...umount /dev/sdb1 says its not mounted...any ideas?

  Read the article

• Ubuntu 14.04 doesn' t boot after upgrade from 12.04 installed inside Windows 8.1

  - by AdiC

  I have Ubuntu 12.04 installed like an app on windows 8.1 (Ubuntu 12.04 allow to be installed like an app in Windows 8.1 and it can be removed when you don't need it any more from Control Panel). Usually, to chose what os to boot when you start the laptop, you can choose between windows 8.1 and Ubuntu after windows logo appeared at start up and that was ok until I made this upgrade. Now when I try to choose Ubuntu the laptop try to boot it but, after that full colored screen is showed the screen go black and this messages appear: mount: mounting /dev/loop0/ on /root failed : Invalid argument mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target filesystem doesn' t have requested /sbin/init No init found. Try passing init = bootarg. BusyBox v1.21.1 (Ubuntu 1:1:21.0-1ubuntu1) built-in shell (ash) Enter 'help' for a list of built-in commands (initramfs) _ I don' t know what to do after this screen appears. Please help !

  Read the article

• Samba / smbd on Centos 6.5

  - by Satalink

  I've installed Samba4 and have the smb.conf file as follows: [global] workgroup = WORKGROUP server string = Samba Server realm = REXIALO.COM netbios name = REXIALO.COM security = user map to guest = Bad Password bind interfaces only = no interfaces = lo venet0 log file = /var/log/samba/samba.log max log size = 1000 [webroot] path = /usr/local/apache/htdocs comment = Example.com webroot directory read only = No I can connect from the same server with smbclient. Localhost: # smbclient -L localhost -U root Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Sharename Type Comment --------- ---- ------- webroot Disk RexiAlo webroot directory IPC$ IPC IPC Service (RexiAlo Samba Server) Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Server Comment --------- ------- Workgroup Master --------- -------Enter root's password: network: # smbclient -L rexialo.com -U Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Sharename Type Comment --------- ---- ------- webroot Disk RexiAlo webroot directory IPC$ IPC IPC Service (RexiAlo Samba Server) Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Server Comment --------- ------- Workgroup Master --------- ------- The problem is when I try to map to the smb webroot from Windows 7, it asks for user/pass but just times out and then prompts for credentials. The samba.log file does not show any activity other than the startup of the smbd process. Any help would be appreciated.

  Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >