Search Results

Search found 28439 results on 1138 pages for '10 1 3 4 1'.

Page 178/1138 | < Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >

• Allow traffic from ssl-vpn to enter ipsec tunnel on fortigate

  - by Sascha

  we configured our FortiGate 50B to route traffic from our local net 192.168.10.* (which is our office) to a remote network 172.29.112.* using an ipsec tunnel. Everything works fine as long my computer has an ip from 192.168.10.*. We can also connect to the office network from at home using a ssl vpn connection. Once connected we receive an ip from 10.41.41.*. Now I want to allow the traffic flow from 10.41.41.* to 172.29.112.* just like it does from the office network. Could somebody point me in the right direction what I would need to do? Thanks, Sascha

  Read the article

• tcpdump filter that excludes private ip traffic

  - by Kyle Brandt

  For a generic filter to exclude all traffic in my dump that is between private IP address, I came up with the following: sudo tcpdump -n ' (not ( (src net 172.16.0.0/20 or src net 10.0.0.0/8 or src net 192.168.0.0/16) and (dst net 172.16.0.0/20 or dst net 10.0.0.0/8 or dst net 192.168.0.0/16) ) ) and (not ( (dst net 172.16.0.0/20 or dst net 10.0.0.0/8 or dst net 192.168.0.0/16) and (src net 172.16.0.0/20 or src net 10.0.0.0/8 or src net 192.168.0.0/16) ) )' -w test2.dump Seems pretty excessive, but it also seems to work, is this filter a lot longer than it needs to be and there is better way to express this logic, or is there anything wrong with the filter?

  Read the article

• Apache 2 with Weblogic Plug-in Redirection, original location still requested to backend

  - by Edo

  We're trying to setup an SSL server in front of a Weblogic server using Apache as the SSL provider. Here's what's inside of our httpd.conf: <Location /original> SetHandler weblogic-handler WebLogicHost 10.11.1.1 WebLogicPort 8700 PathTrim /original PathPrepend /destination ConnectTimeoutSecs 60 </Location> <Location /destination> SetHandler weblogic-handler WebLogicHost 10.11.1.1 WebLogicPort 8700 ConnectTimeoutSecs 60 </Location> This setup works mostly, but in the ssl_error_log file there're these entries: [Wed Aug 11 14:59:00 2010] [error] [client xxx.xxx.xxx.xxx] ap_proxy: trying GET /original at backend host '10.11.1.1/8700; got exception 'CONNECTION_REFUSED [os error=0, line 1739 of ../nsapi/URL.cpp]: Error connecting to host 10.11.1.1:8700' The weird thing is, the redirection still works, but these annoying entries still shows up. Anyone can point out where did we go wrong? Thanks.

  Read the article

• Custom SNMP Cacti Data Source fails to update

  - by Andrew Wilkinson

  I'm trying to create a custom SNMP datasource for Cacti but despite everything I can check being correct, it is not creating the rrd file, or updating it even when I create it. Other, standard SNMP sources are working correctly so it's not SNMP or permissions that are the problem. I've created a new Data Query, which when I click on "Verbose Query" on the device screen returns the following: + Running data query [10]. + Found type = '3' [SNMP Query]. + Found data query XML file at '/volume1/web/cacti/resource/snmp_queries/syno_volume_stats.xml' + XML file parsed ok. + missing in XML file, 'Index Count Changed' emulated by counting oid_index entries + Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.25.2.3.1.3' Index Count: 8 + Index found at OID: '.1.3.6.1.2.1.25.2.3.1.3.1' value: 'Physical memory' + Index found at OID: '.1.3.6.1.2.1.25.2.3.1.3.3' value: 'Virtual memory' + Index found at OID: '.1.3.6.1.2.1.25.2.3.1.3.6' value: 'Memory buffers' + Index found at OID: '.1.3.6.1.2.1.25.2.3.1.3.7' value: 'Cached memory' + Index found at OID: '.1.3.6.1.2.1.25.2.3.1.3.10' value: 'Swap space' + Index found at OID: '.1.3.6.1.2.1.25.2.3.1.3.31' value: '/' + Index found at OID: '.1.3.6.1.2.1.25.2.3.1.3.32' value: '/volume1' + Index found at OID: '.1.3.6.1.2.1.25.2.3.1.3.33' value: '/opt' + index_parse at OID: '.1.3.6.1.2.1.25.2.3.1.3.1' results: '1' + index_parse at OID: '.1.3.6.1.2.1.25.2.3.1.3.3' results: '3' + index_parse at OID: '.1.3.6.1.2.1.25.2.3.1.3.6' results: '6' + index_parse at OID: '.1.3.6.1.2.1.25.2.3.1.3.7' results: '7' + index_parse at OID: '.1.3.6.1.2.1.25.2.3.1.3.10' results: '10' + index_parse at OID: '.1.3.6.1.2.1.25.2.3.1.3.31' results: '31' + index_parse at OID: '.1.3.6.1.2.1.25.2.3.1.3.32' results: '32' + index_parse at OID: '.1.3.6.1.2.1.25.2.3.1.3.33' results: '33' + Located input field 'index' [walk] + Executing SNMP walk for data @ '.1.3.6.1.2.1.25.2.3.1.3' + Found item [index='Physical memory'] index: 1 [from value] + Found item [index='Virtual memory'] index: 3 [from value] + Found item [index='Memory buffers'] index: 6 [from value] + Found item [index='Cached memory'] index: 7 [from value] + Found item [index='Swap space'] index: 10 [from value] + Found item [index='/'] index: 31 [from value] + Found item [index='/volume1'] index: 32 [from value] + Found item [index='/opt'] index: 33 [from value] + Located input field 'volsizeunit' [walk] + Executing SNMP walk for data @ '.1.3.6.1.2.1.25.2.3.1.4' + Found item [volsizeunit='1024 Bytes'] index: 1 [from value] + Found item [volsizeunit='1024 Bytes'] index: 3 [from value] + Found item [volsizeunit='1024 Bytes'] index: 6 [from value] + Found item [volsizeunit='1024 Bytes'] index: 7 [from value] + Found item [volsizeunit='1024 Bytes'] index: 10 [from value] + Found item [volsizeunit='4096 Bytes'] index: 31 [from value] + Found item [volsizeunit='4096 Bytes'] index: 32 [from value] + Found item [volsizeunit='4096 Bytes'] index: 33 [from value] + Located input field 'volsize' [walk] + Executing SNMP walk for data @ '.1.3.6.1.2.1.25.2.3.1.5' + Found item [volsize='1034712'] index: 1 [from value] + Found item [volsize='3131792'] index: 3 [from value] + Found item [volsize='1034712'] index: 6 [from value] + Found item [volsize='775904'] index: 7 [from value] + Found item [volsize='2097080'] index: 10 [from value] + Found item [volsize='612766'] index: 31 [from value] + Found item [volsize='1439812394'] index: 32 [from value] + Found item [volsize='1439812394'] index: 33 [from value] + Located input field 'volused' [walk] + Executing SNMP walk for data @ '.1.3.6.1.2.1.25.2.3.1.6' + Found item [volused='1022520'] index: 1 [from value] + Found item [volused='1024096'] index: 3 [from value] + Found item [volused='32408'] index: 6 [from value] + Found item [volused='775904'] index: 7 [from value] + Found item [volused='1576'] index: 10 [from value] + Found item [volused='148070'] index: 31 [from value] + Found item [volused='682377865'] index: 32 [from value] + Found item [volused='682377865'] index: 33 [from value] AS you can see it appears to be returning the correct data. I've also set up data templates and graph templates to display the data. The create graphs for a device screen shows the correct data, and when selecting one row can clicking create a new data source and graph are created. Unfortunately the data source is never updated. Increasing the poller log level shows that it appears to not even be querying the data source, despite it being used? What should my next steps to debug this issue be?

  Read the article

• php-cgi memory usage higher than php's memory limit

  - by Josh Nankin

  I'm running apache with a worker MPM and php with fastcgi. the following are my mpm limits: StartServers 5 MinSpareThreads 5 MaxSpareThreads 10 ThreadLimit 64 ThreadsPerChild 10 MaxClients 10 MaxRequestsPerChild 2000 I've also setup my php-cgi with the following: PHP_FCGI_CHILDREN=5 PHP_FCGI_MAX_REQUESTS=500 I'm noticing that my average php-cgi process is using around 200+mb of RAM, even as soon as they are started. However, my php memory_limit is only 128M. How is this possible, and what can I do to lower the php-cgi memory consumption?

  Read the article

• Firefox saving password for a 3-field password form in Firefox

  - by Chris

  I've been requested to find a method of saving passwords on a form that uses three inputs, all set as type="password". It seems that Firefox will only save the password for the first password input. Here's the code foundation, which I simplified. <FORM NAME = "PSWRD" ACTION="index.pgm" Method="POST" TARGET="frame"> <INPUT TYPE="PASSWORD" NAME="PASSWORD1" SIZE="5" MAXLENGTH="5"> <INPUT TYPE="PASSWORD" NAME="PASSWORD2" SIZE="10" MAXLENGTH="10"> <INPUT TYPE="PASSWORD" NAME="PASSWORD3" SIZE="10" MAXLENGTH="10"> <INPUT TYPE="submit" VALUE="ENTER"> </form>

  Read the article

• Please, help writing a MIB

  - by facha

  I have a problem with an snmpwalk query returning snmp variables in a non-uniform way: .1.3.6.1.2.1.10.127.1.3.3.1.2.215 -> Hex-STRING: 24 37 4C 0C 65 0E .1.3.6.1.2.1.10.127.1.3.3.1.2.216 -> Hex-STRING: 24 37 4C 0B A2 DA .1.3.6.1.2.1.10.127.1.3.3.1.2.217 -> STRING: "$7L f:" .1.3.6.1.2.1.10.127.1.3.3.1.2.218 -> STRING: "$7L k2" As you can see, some variables are of a STRING type, others are Hex-STRING. So, I'm trying to write a simple MIB to force them all come out as Hex-STRING. This is where I've gotten so far: TEST-MIB DEFINITIONS ::= BEGIN PhysAddress ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x:" STATUS current SYNTAX OCTET STRING test OBJECT-TYPE SYNTAX PhysAddresss MAX-ACCESS read-only STATUS current ::= { 1 3 6 1 2 1 10 127 1 3 3 1 2 } END However, snmpwalk doesn't seem to notice my textual convention (even though the "test" variable is being recognized). I still get a mixture of STIRNGs and Hex-STRINGs. Could anybody point to where is my mistake? snmpwalk -v2c -cpublic 192.168.1.2 TEST-MIB::test ... TEST-MIB::test.216 = Hex-STRING: 24 37 4C 0B A2 DA TEST-MIB::test.217 = STRING: "$7L f:"

  Read the article

• How can I install things in Linux with *no yum* and *no wget*?

  - by e9t

  I'm a newbie to Linux (that mainly uses Windows and Mac OS X) needing some advice. I was trying to install git on a Linux machine today, and encountered some problems: Not knowing the version of the installed OS, I've opened the /proc/version file which said: Linux version 2.6.9-42.0.2.ELsmp ([email protected]) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Thu Aug 17 17:57:31 EDT 2006 Then, as written in the git documents (http://git-scm.com/download/linux), I assumed I could use the yum install git command for Fedora, but got the following result. [root@myserver ~]# yum install git -bash: yum: command not found So I tried installing yum using wget, but wasn't so lucky. [root@myserver ~]# wget http://linux.duke.edu/projects/yum/download/2.0/yum-2.0.7.tar.gz -bash: wget: command not found I googled and found this page and this page, so tried installing yum with rpm, but only got a result full of question marks. (Possibly an encoding problem, hmm...) [root@myserver ~]# rpm -Uvh http://www.eomy.net/linux/install-yum-x86_64/wget-1.10.2-0.40E.x86_64.rpm http://www.eomy.net/linux/install-yum-x86_64/wget-1.10.2-0.40E.x86_64.rpm(??)?? ?????? ?: /var/tmp/rpm-xfer.TbuAOu: V3 DSA signature: NOKEY, key ID 443e1821 ???.. ########################################### [100%] wget-1.10.2-0.40E U???????g??????? wget-1.10.2-0.40E???? ??g??/usr/bin/wget ?? wget-1.10.2-0.40E U?????? ???? wget-1.10.2-0.40E???? ??g??/usr/share/man/man1/wget.1.gz ?? wget-1.10.2-0.40E U?????? ???? [root@myserver ~]# Finally, when I typed rpm --version in the terminal, I got the below results. [root@myserver ~]# rpm --version RPM ???? - 4.3.3 I would like to know what I can do or possibly try now. Is it not possible to wget or yum anything in my situation? Or is there any magical tool like homebrew (http://mxcl.github.com/homebrew/) that I can use? Any comments or advice would be appreciated. Thanks in advance!

  Read the article

• Diagnosing Solaris 8 server memory and swap space usage

  - by datSilencer

  Hello everyone. Essentially, my question is related to memory allocation for Solaris virtual machines. I am running a couple of old Sun ONE 6 Java web servers on two Solaris 8 virtual machines. I see that there's a reasonable amount of swap space being used, but I'm not exactly sure if this could indicate a need to add more RAM to these machines. At service peak hours (mornings usually), the response time of the web application these servers host jumps up to at most 11 seconds (somewhat detrimental for a relatively simple web page loading action). Average response time at non peak times is about 5 seconds. What would you be able to infer about the RAM usage for these machines from the ouput below? Is this information reasonably sufficient? Or would I need to run some other commands to rule out server memory starvation? Finally, since there is a Java application at the core of the setup, I've also thought about: 1) Trace the heap's Object allocation to detect potential memory leaks. 2) Do some performance profiling to see if this instead related to networking delays. I mention this since the application talks with a single Oracle Database, but I would doubt this to be the case since they're pretty close from a network segmentation perspective. I appreciate any kind of insight and feedback you could provide. Thanks for your time and help. Server 1: 40 processes: 38 sleeping, 1 zombie, 1 on cpu CPU states: 99.1% idle, 0.4% user, 0.4% kernel, 0.0% iowait, 0.0% swap Memory: 2048M real, 295M free, 865M swap in use, 3788M swap free PID USERNAME THR PRI NICE SIZE RES STATE TIME CPU COMMAND 12676 webservd 112 29 10 616M 242M sleep 103:37 0.48% webservd 18317 root 1 59 0 23M 19M sleep 67:24 0.08% perl 9479 support 1 59 0 6696K 2448K cpu/1 0:11 0.05% top 8012 root 10 59 0 34M 704K sleep 80:54 0.04% java 1881 root 33 29 10 110M 13M sleep 33:03 0.02% webservd 7808 root 1 59 0 83M 67M sleep 7:59 0.00% perl 1461 root 20 59 0 5328K 1392K sleep 6:49 0.00% syslogd 1691 root 2 59 0 27M 680K sleep 4:22 0.00% webservd 24386 root 1 59 0 15M 11M sleep 2:50 0.00% perl 23259 root 1 59 0 11M 4240K sleep 2:42 0.00% perl 24718 root 1 59 0 11M 5464K sleep 2:29 0.00% perl 22810 root 1 59 0 19M 11M sleep 2:21 0.00% perl 24451 root 1 53 2 11M 3800K sleep 2:18 0.00% perl 18501 root 1 56 1 11M 3960K sleep 2:18 0.00% perl 14450 root 1 56 1 15M 6920K sleep 1:49 0.00% perl Server 2 42 processes: 40 sleeping, 1 zombie, 1 on cpu CPU states: 98.8% idle, 0.4% user, 0.8% kernel, 0.0% iowait, 0.0% swap Memory: 1024M real, 31M free, 554M swap in use, 3696M swap free PID USERNAME THR PRI NICE SIZE RES STATE TIME CPU COMMAND 5607 webservd 74 29 10 284M 173M sleep 20:14 0.21% webservd 15919 support 1 59 0 4056K 2520K cpu/1 0:08 0.09% top 13138 root 10 59 0 34M 1952K sleep 210:51 0.08% java 13753 root 1 59 0 22M 12M sleep 170:15 0.07% perl 22979 root 33 29 10 112M 7864K sleep 85:07 0.04% webservd 22930 root 1 59 0 3424K 1552K sleep 17:47 0.01% xntpd 22978 root 2 59 0 27M 2296K sleep 10:49 0.00% webservd 13571 root 1 59 0 9400K 5112K sleep 5:52 0.00% perl 5606 root 2 29 10 29M 9056K sleep 0:36 0.00% webservd 15910 support 1 59 0 9128K 2616K sleep 0:00 0.00% sshd 13106 root 1 59 0 82M 3520K sleep 7:47 0.00% perl 13547 root 1 59 0 12M 5528K sleep 6:38 0.00% perl 13518 root 1 59 0 9336K 3792K sleep 6:24 0.00% perl 13399 root 1 56 1 8072K 3616K sleep 5:18 0.00% perl 13557 root 1 53 2 8248K 3624K sleep 5:12 0.00% perl

  Read the article

• OpenVPN Clients using server's connection (with no default gateway)

  - by Branden Martin

  I wanted an OpenVPN server so that I could create a private VPN network for staff to connect to the server. However, not as planned, when clients connect to the VPN, it's using the VPN's internet connection (ex: when going to whatsmyip.com, it's that of the server and not the clients home connection). server.conf local <serverip> port 1194 proto udp dev tun ca ca.crt cert x.crt key x.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 9 client.conf client dev tun proto udp remote <srever> 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert x.crt key x.key ns-cert-type server comp-lzo verb 3 Server's route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 69.64.48.0 * 255.255.252.0 U 0 0 0 eth0 default static-ip-69-64 0.0.0.0 UG 0 0 0 eth0 default static-ip-69-64 0.0.0.0 UG 0 0 0 eth0 default static-ip-69-64 0.0.0.0 UG 0 0 0 eth0 Server's IP Tables Chain INPUT (policy ACCEPT) target prot opt source destination fail2ban-proftpd tcp -- anywhere anywhere multiport dports ftp,ftp-data,ftps,ftps-data fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:20000 ACCEPT tcp -- anywhere anywhere tcp dpt:webmin ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- anywhere anywhere tcp dpt:www ACCEPT tcp -- anywhere anywhere tcp dpt:imaps ACCEPT tcp -- anywhere anywhere tcp dpt:imap2 ACCEPT tcp -- anywhere anywhere tcp dpt:pop3s ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 ACCEPT tcp -- anywhere anywhere tcp dpt:ftp-data ACCEPT tcp -- anywhere anywhere tcp dpt:ftp ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain fail2ban-proftpd (1 references) target prot opt source destination RETURN all -- anywhere anywhere Chain fail2ban-ssh (1 references) target prot opt source destination RETURN all -- anywhere anywhere My goal is that clients can only talk to the server and other clients that are connected. Hope I made sense. Thanks for the help!

  Read the article

• I have too many DNS servers configured

  - by Jon Will

  I have my laptop connecting to my wireless router, and I have told the router to issue out DNS via the DHCP lease. The laptop is configured to use the information. The router is configured to only issue two DNS server addresses from open dns, but the laptop reports Networking Dns Servers: 10.197.100.1 10.197.100.2 10.197.100.3 8.8.8.8 8.8.4.4 208.67.222.222 208.67.220.220 I have no idea where the laptop is getting these additional IPs as DNS. Please advise.

  Read the article

• django, mod_wsgi, MySQL High CPU - Problems

  - by Red Rover

  I am having a problem with an OSQA site. It is Django/Apache/mod_wsgi configured site. Every hour, the CPU spikes to 164% (Average) for task HTTPD. After 10 minutes, it frees back up. I have reviewed the logs, cron tables, made many config changes, but cannot track this problem down. Can someone please look at the information below and let me know if it is a configuration problem, or if anyone else has experienced this issue. Running TOP shows HTTPD using 165% of CPU VMware performance monitor also displays spikes. This happens every hour for 10 minutes. I have the following information from server status Server Version: Apache/2.2.15 (Unix) DAV/2 mod_wsgi/3.2 Python/2.6.6 Server Built: Feb 7 2012 09:50:15 Current Time: Sunday, 10-Jun-2012 21:44:29 EDT Restart Time: Sunday, 10-Jun-2012 19:44:51 EDT Parent Server Generation: 0 Server uptime: 1 hour 59 minutes 37 seconds Total accesses: 1088 - Total Traffic: 11.5 MB CPU Usage: u80.26 s243.8 cu0 cs0 - 4.52% CPU load .152 requests/sec - 1682 B/second - 10.8 kB/request 4 requests currently being processed, 11 idle workers ....._..........__......W....................................... ...................................C._..._....._L__._L_._....... ...................... Scoreboard Key: "_" Waiting for Connection, "S" Starting up, "R" Reading Request, "W" Sending Reply, "K" Keepalive (read), "D" DNS Lookup, "C" Closing connection, "L" Logging, "G" Gracefully finishing, "I" Idle cleanup of worker, "." Open slot with no current process Srv PID Acc M CPU SS Req Conn Child Slot Client VHost Request 0-0 - 0/0/34 . 0.42 327 17 0.0 0.00 0.67 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 1-0 - 0/0/22 . 0.31 339 32 0.0 0.00 0.26 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 2-0 - 0/0/22 . 0.65 358 10 0.0 0.00 0.31 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 3-0 - 0/0/31 . 1.03 378 31 0.0 0.00 0.60 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 4-0 - 0/0/20 . 0.45 356 9 0.0 0.00 0.31 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 5-0 18852 0/16/34 _ 0.98 27 18120 0.0 0.37 0.62 69.180.250.36 osqa.informs.org GET /questions/289/what-is-the-difference-between-operations-re 6-0 - 0/0/32 . 0.94 309 29 0.0 0.00 0.64 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 7-0 - 0/0/31 . 1.15 382 32 0.0 0.00 0.75 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 8-0 - 0/0/21 . 0.28 403 19 0.0 0.00 0.20 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 9-0 - 0/0/32 . 1.37 288 16 0.0 0.00 0.60 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 10-0 - 0/0/33 . 1.72 383 16 0.0 0.00 0.40 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 I am running Django 1.3 This is a mod_wsgi configuration and copied is the wsgi.conf file: <IfModule !python_module> <IfModule !wsgi_module> LoadModule wsgi_module modules/mod_wsgi.so <IfModule wsgi_module> <Directory /var/www/osqa> Order allow,deny Allow from all #Deny from all </Directory> WSGISocketPrefix /var/run/wsgi WSGIPythonEggs /var/tmp WSGIDaemonProcess OSQA maximum-requests=10000 WSGIProcessGroup OSQA Alias /admin_media/ /usr/lib/python2.6/site-packages/Django-1.2.5-py2.6.egg/django/contrib/admin/media/ Alias /m/ /var/www/osqa/forum/skins/ Alias /upfiles/ /var/www/osqa/forum/upfiles/ <Directory /var/www/osqa/forum/skins> Order allow,deny Allow from all </Directory> WSGIScriptAlias / /var/www/osqa/osqa.wsgi </IfModule> </IfModule> </IfModule> This is the httpd.conf file Timeout 120 KeepAlive Off MaxKeepAliveRequests 100 MaxKeepAliveRequests 400 KeepAliveTimeout 3 <IfModule prefork.c> Startservers 15 MinSpareServers 10 MaxSpareServers 20 ServerLimit 50 MaxClients 50 MaxRequestsPerChild 0 </IfModule> <IfModule worker.c> StartServers 4 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> We are using MySQL The server is an ESX4i, configured for the VM to use 4 CPUs and 8 GB Ram. Hyper threading is enabled, 2 physical CPU's, with 4 Logical. the CPU are Intel Xeon 2.8 GHz. Total memory is 12GB

  Read the article

• 3Proxy with Rotating IP's

  - by ramesh.mimit

  I want to configure a proxy which can rotate the IP's on session basis. Let me explain what I have done so far and what is exact requirement. I installed 3 proxy configured it to listen on 10 Public interfaces which is working fine. But my requirement is if any user access the internet, IP which will go out should be changed for every new session. Lets say my prxy IP's are from 10.20.30.5-14. When an user opens google.com it will hit google webserver with 10.20.30.5 IP and now if same user opens up yahoo.com then, it should it with 10.20.30.6 or any ip b/w 6 to 14. Is this possible?

  Read the article

• Amazon ec2 folder missing

  - by CQM

  To set permissions on the settings file On your Amazon EC2 instance, at a command prompt, use the following command to set permissions: sudo chmod 666 /var/www/html/sites/default/settings.php except I don't have a www folder in my instance [ec2-user@ip-10-242-118-215 ~]$ cd / [ec2-user@ip-10-242-118-215 /]$ ls bin cgroup etc lib local media opt root selinux sys usr boot dev home lib64 lost+found mnt proc sbin srv tmp var [ec2-user@ip-10-242-118-215 /]$ cd var [ec2-user@ip-10-242-118-215 var]$ ls account db games local log nis preserve run tmp cache empty lib lock mail opt racoon spool yp Please advise, did I forget to install something that the amazon instructions assumed I knew about? Running 64bit Amazon linux ami march 2012 I feel like the webserver is missing?

  Read the article

• find the next due date after today within a group in an Excel PivotTable

  - by Dennis George

  I have got a table set up in one sheet with "transactions". Each row contains a name of a vendor, the amount owed or paid depending on transaction type, and the due date/transaction date. Here is some simplified sample data: Vendor Date Invoice Payment Vendor A 6/30 $200 Vendor A 6/30 ($200) Vendor B 7/5 $500 Vendor B 7/5 ($500) Vendor C 10/28 $50 Vendor A 10/30 $100 Vendor C 11/15 $50 I have already built a PivotTable from that table to group these transactions by vendor and sum the remainder owed. What I'm trying to figure out is how to, for each vendor, get the next due date (min date of the group, excluding dates < Today()), or if there is no next due date then I want to see the max date for that group. Here is what my PivotTable looks like, plus the date column I'd like to add (assuming Today() = 10/23): Vendor Date Owed Vendor B 7/5 - Vendor C 10/28 $100 Vendor A 10/30 $100 I know calling it next due date might not be so accurate if I end up with the date of a payment in that column, but I'm ok with that. tl;dr : I want to find the next earliest date within each group, or the last date. How do I do this?

  Read the article

• OSSEC agent behind NAT

  - by Eric

  I am working on an OSSEC deployment where I will have multiple agents behind 1 public IP. Below is an example of the setup Private Network OSSEC-Agent1 (192.168.1.10) OSSEC-Agent2 (192.168.50.33) OSSEC-Agent3 (10.10.10.1) Those IPs NAT to 1 public IP (1.1.1.1) Then 1.1.1.1 talks to the public OSSEC server on 2.2.2.2 I've read some OSSEC documentation talking about NAT here, but it doesn't tell me exactly what I need to know. Their example is using an entire /24 subnet and mine will mainly have multiple agents to only 1 public IP. With the setup so far, I brought Agent1 online fine and it is communicating to the OSSEC server. However Agent2 continues to fail trying to connect to 2.2.2.2. Even though when I added the key, I had the correct name for it, so I know it talked to the portal at least once for that information. I'm assuming it's just getting confused with the multiple keys to 1 public IP. I basically want to know if this is possible and/or if I'm just overlooking something simple. Any help would be greatly appreciated.

  Read the article

• HAProxy - forward to a different web server based on URI

  - by Saggi Malachi

  I have an HTTP farm with the following configuration: listen webfarm 10.254.23.225:80 mode http balance roundrobin cookie SERVERID insert option httpclose option forwardfor option httpchk HEAD /check.txt HTTP/1.0 server webA 10.254.23.4:80 cookie A check server webB 10.248.23.128:80 cookie B check I would like to add some option which would forward all requests for a specific URI (i.e /special) to a 3rd web server. How should I do it?

  Read the article

• Amazon EC2 Creating Tunnel with OpenVPN

  - by nocode

  I have followed these instructions: http://aws.amazon.com/articles/0639686206802544 I can ping the VPN endpoints and I have the corresponding VPC CIDR pointing to the EC2 instance in the route table. Here is my config: port 1194 proto udp dev tun # Remote peer and network remote Elastic_IP route 10.0.0.0/16 # Configure local and remote VPN endpoints ifconfig 169.254.255.1 169.254.255.2 # The pre-shared static key secret /etc/openvpn/ovpn.key keepalive 10 120 persist-key persist-tun log /var/log/openvpn.log verb 3 When I look at my logs, I get this error: RESOLVE: Cannot resolve host address: 10.0.0.0/16: Name or service not known OpenVPN ROUTE: failed to parse/resolve route for host/network: 10.0.0.0/16 in VPC1, the CIDR is 172.31.0.0/16 which is targeting the EC2 instance also running OpenVPN. I'm getting the same error from the Instance in VPC2 with the corresponding CIDR. Just for testing, i stopped the IPTABLES service I am running the Amazon linux AMI image (x64) as specified in the article I linked.

  Read the article

• Mac OS X Client With Static DHCP Assignment Requests Wrong IP via Option 50

  - by Starchy

  I have a number of Mac (and a few Linux) laptops getting DHCP from a Force10 layer 3 switch, the only DHCP server on the subnet. There's a global dynamic pool, and for each full-time employee's laptop I have a single IP static pool set by MAC address. One and only one of the clients, running OS X 10.7.5, consistently fails to get a static assignment. The MAC address in the static pool definition has been carefully re-checked. Running tcpdump on a mirrored port when the laptop connects, I see that it is specifically requesting 10.100.0.252 (a dynamic address): 11:32:10.108280 IP (tos 0x0, ttl 255, id 28293, offset 0, flags [none], proto UDP (17), length 328) 0.0.0.0.bootpc > broadcasthost.bootps: [udp sum ok] BOOTP/DHCP, Request from 3c:07:54:xx:xx:xx (oui Unknown), length 300, xid 0x1399da89, Flags [none] (0x0000) Client-Ethernet-Address 3c:07:54:xx:xx:xx (oui Unknown) Vendor-rfc1048 Extensions Magic Cookie 0x63825363 DHCP-Message Option 53, length 1: Request Parameter-Request Option 55, length 9: Subnet-Mask, Default-Gateway, Domain-Name-Server, Domain-Name Option 119, LDAP, Option 252, Netbios-Name-Server Netbios-Node MSZ Option 57, length 2: 1500 Client-ID Option 61, length 7: ether 3c:07:54:xx:xx:xx Requested-IP Option 50, length 4: 10.100.0.252 Lease-Time Option 51, length 4: 7776000 Hostname Option 12, length 10: "host-name" END Option 255, length 0 PAD Option 0, length 0, occurs 8 I haven't been able to find any extra system prefs or unusual software on the laptop. Disabling the interface and rebooting or temporarily setting the IP manually both fail to make any difference. Any suggestions appreciated.

  Read the article

• /var/log/secure user activity. also, httpd can not start without two users

  - by user52869

  hello, i found some strange informations in /var/log/secure file: Feb 10 02:02:04 server2364 usermod[30750]: unlock user `username1' password Feb 10 02:02:04 server2364 usermod[30811]: lock user `username2' password Feb 10 02:05:16 server2364 usermod[30992]: unlock user `username2' password Feb 10 02:05:18 server2364 usermod[31114]: unlock user `username1' password username1 and username2 are two usernames on system, that have no ability to login. for every night in 02:02h results like that are in /var/log/secure file. one more thing: files /etc/shadow, and /etc/shadow have timestamps 02:05h. what can be cause for it? next thing, if i remove those two accounts (username1 and username2), i can not start web server. can you help me with some ideas, am i hacked?

  Read the article

• Slower than expected 802.11n wireless network speeds

  - by Ian

  I have two ASUS laptops running Windows 7 connected wirelessly via 802.11n at 150 Mbit, as reported by Task Manager. The router is Netgear WNDR3700. When testing the wireless connection speed using iperf, I'm not getting nearly 150 Mbit: C:\>iperf -c 10.0.0.123 -t 30 ------------------------------------------------------------ Client connecting to 10.0.0.123, TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [148] local 10.0.0.116 port 53819 connected with 10.0.0.123 port 5001 [ ID] Interval Transfer Bandwidth [148] 0.0-30.0 sec 41.2 MBytes 11.5 Mbits/sec That's a typical result. Running parallel client threads does not increase the overall total speed. Why would I only be getting 11.5 Mbit on a 150 Mbit connection?

  Read the article

• NAT cause huge External (actually internal) bandwidth usage

  - by user67953

  We have 4 servers running in a data center, with internal IP: 192.168.3.* assigned. A hardware (FORTIGATE) firewall configured NAT, and it will lead the traffic as: external IP: 111.222.333.10 -> 192.168.3.10 www.server1.com 111.222.333.11 -> 192.168.3.11 www.server2.com 111.222.333.12 -> 192.168.3.12 www.server3.com In DNS, we have www.server1.com A 111.222.333.10 Now if I send a lot of data to www.server1.com from www.server2.com, the data will be send through 111.222.333.10 (external IP) and this cause our bandwidth usage huge (expensive!). The work around I have is to add a local host mapping to server2: 192.168.3.10 www.server1.com. That way when send files from server2 to www.server1.com, it will be internal. However, we are having more and more servers, it would be hard to manually add mapping to every server. Just wondering do we have another solution for this? Can we do something in the FORTIGATE firewall? ps. The DNS server being used is public, such as opendns, Google dns etc.

  Read the article

• DNS and DHCP dies after ~2 days of use on ClearOS

  - by TheLQ

  I'm using ClearOS (based on CentOS, so any info specific to it should apply here) as a gateway, DHCP, and DNS server. I had this server running perfectly for a month or two before replacing it with another server. However due DNS and DHCP failing 2 days in and a host of other performance issues (the box was a little underpowered), I changed back to the origional server. However 2 days in DHCP and DNS are failing again, and I'm out of idea's on why. In both cases to my knowledge no network or server changes occurred after installation. Right after installing (and at least a day in) DNS and DHCP was working just fine. However later (Day 2) I get a call saying their internet is down (translation: Nobody can get to websites because DNS is down) I've tried to fix the problem by checking if the dnsmasq is even running (it is), restarting the service, and restarting the server to no effect. I do have two internal servers that have static DHCP leases but one's lease must of expired as I can't connect to it anymore. I'm hesitant to do any dhcp testing on the last server as I'll not be able to connect to it anymore. Is there anything anyone can think of on why DNS and DHCP would fail 2 days in to running perfectly? More info: Running dnsmasq in debug mode. This is all that's displayed even when running nslookup quackwall. I'm not sure though if nslookup commands should show up in the log [root@quackwall ~]# /usr/sbin/dnsmasq -dq dnsmasq: started, version 2.49 cachesize 150 dnsmasq: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP dnsmasq-dhcp: DHCP, IP range 10.0.0.100 -- 10.0.0.254, lease time 12h dnsmasq: reading /etc/resolv.conf dnsmasq: using nameserver 74.128.17.114#53 dnsmasq: using nameserver 74.128.19.102#53 dnsmasq: read /etc/hosts - 5 addresses dnsmasq-dhcp: read /etc/ethers - 2 addresses On the other server DNS and the Gateway are all configured correctly (10.0.0.2 is quackwall) lordquackstar@quackgame:~$ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.0.0.0 0.0.0.0 255.255.240.0 U 0 0 0 eth0 0.0.0.0 10.0.0.2 0.0.0.0 UG 0 0 0 eth0 lordquackstar@quackgame:~$ cat /etc/resolv.conf nameserver 10.0.0.2 domain highwow.lan search highwow.lan

  Read the article

• RHEL 5/CentOS 5 - sshd becomes unresponsive

  - by ewwhite

  I have a number of CentOS 5.x and RHEL 5.x systems whose SSH daemons become unresponsive, preventing remote logins. The typical error from the connecting side is: $ ssh db1 db1 : ssh_exchange_identification: Connection closed by remote host Examining /var/log/messages after a forced reboot shows the following leading up to the restart: Dec 10 10:45:51 db1 sshd[14593]: fatal: Privilege separation user sshd does not exist Dec 10 10:46:02 db1 sshd[14595]: fatal: Privilege separation user sshd does not exist Dec 10 10:46:54 db1 sshd[14711]: fatal: Privilege separation user sshd does not exist Dec 10 10:47:38 db1 sshd[14730]: fatal: Privilege separation user sshd does not exist These systems use LDAP authentication and the nsswitch.conf file is configured to look at local "files" first. [root@db1 ~]# cat /etc/nsswitch.conf # # /etc/nsswitch.conf # passwd: files ldap shadow: files ldap group: files ldap hosts: files dns The Privilege-separated SSH user exists in the local password file. [root@db1 ~]# grep ssh /etc/passwd sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin Any ideas on what the root cause is? I did not see any Red Hat errata that covers this.

  Read the article

• RTNETLINK answers: Invalid argument

  - by LinuxPenseur

  When my system boots up it shows the following message. Bringing up loopback interface: [ OK ] Bringing up interface eth0: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth1: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth2: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth3: RTNETLINK answers: Invalid argument [ OK ] Why is this happening. Normally it does not give the message RTNETLINK answers: Invalid argument I did ifconfig and the output is eth0 Link encap:Ethernet HWaddr 00:00:50:6D:56:B4 inet addr:120.0.10.137 Bcast:120.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b4/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:214 (214.0 b) Base address:0xa000 eth1 Link encap:Ethernet HWaddr 00:00:50:6D:56:B5 inet addr:121.0.10.137 Bcast:121.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b5/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:214 (214.0 b) Base address:0xc000 eth2 Link encap:Ethernet HWaddr 00:00:50:6D:56:B6 inet addr:128.0.10.137 Bcast:128.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1006 (1006.0 b) TX bytes:396 (396.0 b) Interrupt:16 eth3 Link encap:Ethernet HWaddr 00:00:50:6D:56:B7 inet addr:123.0.10.137 Bcast:123.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:728 (728.0 b) TX bytes:396 (396.0 b) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:980 (980.0 b) TX bytes:980 (980.0 b) What could be the reason for the message and how to change this to normal? Thanks

  Read the article

< Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >