Search Results

Search found 16001 results on 641 pages for 'convention over configuration'.

Page 178/641 | < Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >

  • Clonezilla-SE with another DHCP Server in LAN

    - by aleroot
    I want to install Clonezilla-Server(192.168.1.100) in a network that already have a DHCP Server (dd-wrt with dnsmasq - 192.168.1.1). I've installed Clonezilla-SE on ubuntu Server 10.10, once installed and configured Clonezilla Server i've removed the DHCP-Server and set pxe server address in dnsmasq configuration on DHCP Server : dhcp-boot=pxelinux.0,,192.168.1.100 When i try to start from PXE a Computer in the network clonezilla start, but give me an error that the ipddress of the machine is not given by the clonezilla server and can't continue ... Someone has already tried to configure Clonezilla-SE in a similar enviroment? Is there some configuration on DRBL server of Clonezilla that i need to do ?

    Read the article

  • wsgi - narrow user permissions.

    - by Tomasz Wysocki
    I have following Apache configuration and my application is working fine: <VirtualHost *:80> ServerName ig-test.example.com WSGIScriptAlias / /home/ig-test/src/repository/django.wsgi WSGIDaemonProcess ig-test user=ig-test </VirtualHost> But I want to protect my files from other users, so I do: chown ig-test /home/ig-test/ -R chmod og-rwx /home/ig-test/ -R And application stops working: (13)Permission denied: /home/ig-test/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable Is it possible to achieve what i'm doing with wsgi? If I have to give read permissions to some files it will be fine. But there are files I have to protect (like file with DB configuration or business logic of application).

    Read the article

  • [Kubuntu 14.04][Eclipse] (ADT) crashes at button OK from Project properties

    - by nouseforname
    Since i upgraded to kubuntu 14.04, my Eclipse crashes at different situations. Mostly i can "simulate" it when going to project properties and press ok. Then it always crashes. My system: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=14.04 DISTRIB_CODENAME=trusty DISTRIB_DESCRIPTION="Ubuntu 14.04.1 LTS" My Java: java version "1.8.0_05" Java(TM) SE Runtime Environment (build 1.8.0_05-b13) Java HotSpot(TM) 64-Bit Server VM (build 25.5-b02, mixed mode) My ADT Version: Android Development Toolkit Version: 23.0.0.1245622 I already tried to add this in adt-bundle-linux-x86_64/eclipse/configuration/configuration.ini org.eclipse.swt.browser.DefaultType=mozilla -Dorg.eclipse.swt.browser.DefaultType=mozilla Error: # # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007fe049eb1718, pid=5964, tid=140601811232512 # # JRE version: Java(TM) SE Runtime Environment (8.0_05-b13) (build 1.8.0_05-b13) # Java VM: Java HotSpot(TM) 64-Bit Server VM (25.5-b02 mixed mode linux-amd64 compressed oops) # Problematic frame: # C [libgobject-2.0.so.0+0x19718] g_object_get_qdata+0x18 # # Core dump written. Default location: /home/maddin/core or core.5964 # # An error report file with more information is saved as: # /home/maddin/hs_err_pid5964.log Compiled method (nm) 28866 4166 n 0 org.eclipse.swt.internal.gtk.OS::_g_object_get_qdata (native) total in heap [0x00007fe051da6790,0x00007fe051da6af0] = 864 relocation [0x00007fe051da68b0,0x00007fe051da68f8] = 72 main code [0x00007fe051da6900,0x00007fe051da6ae8] = 488 oops [0x00007fe051da6ae8,0x00007fe051da6af0] = 8 # # If you would like to submit a bug report, please visit: # http://bugreport.sun.com/bugreport/crash.jsp # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # Now, as soon as i change SystemSettings - Application Apperance - GTK - GTKn-Design to something else but "oxygen-gtk" this crash doesn't happen anymore. But the application appearance also is ugly. Beside that i get a lot of errors/warnings like that: (SWT:6148): GLib-GObject-CRITICAL **: g_closure_add_invalidate_notifier: assertion 'closure->n_inotifiers < CLOSURE_MAX_N_INOTIFIERS' failed or other GTK warnings from the particular design, not having theme-engine. Which actually doesn't cause any crahs it seems so far. So i have 3 options: accept crashes accept warnings (maybe the best choice) accept ugly design What can i do to solve this issue without changing the design settings?

    Read the article

  • CUPS Web Admin Error 500 Unknown

    - by Floyd Resler
    I keep getting a 500 Unknown error whenever I navigate off the home page of my CUPS web admin. I'm sure I have something misconfigured but I'm not sure what. Here's my configuration: # # "$Id: cupsd.conf.in 8805 2009-08-31 16:34:06Z mike $" # # Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a # complete description of this file. # # Log general information in error_log - change "warn" to "debug" # for troubleshooting... LogLevel warn # Administrator user group... SystemGroup lpadmin sys root # Only listen for connections from the local machine. Listen 192.168.6.101:631 Listen /var/run/cups/cups.sock ServerName 192.168.6.101 # Show shared printers on the local network. Browsing On BrowseOrder allow,deny BrowseAllow all BrowseLocalProtocols CUPS BrowseAddress 192.168.6.255 # Default authentication type, when authentication is required... DefaultAuthType Basic # Restrict access to the server... Order allow,deny Allow From All Allow From 127.0.0.1 # Restrict access to the admin pages... AuthType Default Require user @SYSTEM Order allow,deny Allow From All Allow From 127.0.0.1 # Restrict access to configuration files... AuthType Default Require user @SYSTEM Order allow,deny Allow From All Allow From 127.0.0.1 # Set the default printer/job policies... # Job-related operations must be done by the owner or an administrator... Require user @OWNER @SYSTEM Order deny,allow # All administration operations require an administrator to authenticate... AuthType Default Require user @SYSTEM Order deny,allow # All printer operations require a printer operator to authenticate... AuthType Default Require user @SYSTEM Order deny,allow # Only the owner or an administrator can cancel or authenticate a job... Require user @OWNER @SYSTEM Order deny,allow Order deny,allow # Set the authenticated printer/job policies... # Job-related operations must be done by the owner or an administrator... AuthType Default Order deny,allow AuthType Default Require user @OWNER @SYSTEM Order deny,allow # All administration operations require an administrator to authenticate... AuthType Default Require user @SYSTEM Order deny,allow # All printer operations require a printer operator to authenticate... AuthType Default Require user @SYSTEM Order deny,allow # Only the owner or an administrator can cancel or authenticate a job... AuthType Default Require user @OWNER @SYSTEM Order deny,allow Order deny,allow # # End of "$Id: cupsd.conf.in 8805 2009-08-31 16:34:06Z mike $". #

    Read the article

  • How to sync Ubuntu/software/configurations between N computers with free software and/or without a cloud?

    - by skanatek
    Note: this question is not about syncing data in a Dropbox-like way (files, folders), it is more about syncing configurations. I would like to have exactly the same version of Ubuntu with all the software installed and configured both on my Desktop PC and on my Laptop PC (and maybe on my small netbook PC) without using Ubuntu Sync and with minimal maintenance effort (setup once, run for a long time). The use case is the following: I work on my Laptop PC and do some changes to software configuration, for example: configure vim to have a new plugin update the Search Tracker / Recoll file search index configure Thunderbird to have an additional IMAP account ('remember password') add some new bookmarks in Firefox/Chrome change the desktop background image install new software with apt-get install build and install new software with checkinstall etc. I do some 'sync' operation I switch to my Desktop PC and get all the changes from (1) working on the Desktop PC I work on my Desktop PC and do some changes to software configuration, for example: add new directory to the list of directories to be backed up by DejaDup add a new check spelling dictionary to the Libreoffice Writer configure the Terminator software to have colored fonts install new font into the Ubuntu system configure Ekiga to make phone calls etc. I do some 'sync' operation I switch to my Laptop PC and get all the changes from (1) and (4) working on the Laptop PC. Question: What free/open-source software can I use to sync both machines' Ubuntu systems, installed software and configurations? Is it possible to do that without any cloud services? Complementary question: It is obvious that the Desktop PC and the Laptop PC have different hardware configurations. How does the 'sync software' in question deal with video drivers, wlan drivers and their configurations? Note: I do not need all the PCs to be synced at the same time, because I work with only one single machine at once. Note: I considered to use Chef to solve the problem, but it seems that it might be really cumbersome to maintain such a setup. Note: I also considered using a bootable USB with Ubuntu installed (portable Linux), but I am not sure that the video drivers will work then.

    Read the article

  • Reverse proxy 502 bad gateway

    - by Brian Graham
    I have setup a subdomain to proxy my plesk panel, but when saving pages I am getting 502 Bad Gateway error instead of a completion message. I am running CentOS 6. Here is my vhost.conf configuration for http://plesk.domain.tld/: RewriteEngine On RewriteCond %{SERVER_PORT} ^80$ RewriteRule $ https://plesk.domain.tld/ [R,L] Here is my vhost_ssl.conf configuration for https://plesk.domain.tld/: SSLProxyEngine On <Location /> ProxyPass https://localhost:8443/ ProxyPassReverse https://localhost:8443/ </Location> I have more than enough (and I have even checked) RAM, CPU and HDD. There are no spikes. As well, the posted information does save, it just errors when trying to show me a "This information has been saved." green/red block. Here is the relevent error from /var/log/nginx/error.log (IP/Host Filtered): 2014/05/29 02:42:41 [error] 8046#0: *402 upstream prematurely closed connection while reading response header from upstream, client: 173.238.XX.XX, server: plesk.domain.tld, request: "POST /smb/web/edit HTTP/1.1", upstream: "https://198.100.XX.XX:7081/smb/web/edit", host: "plesk.domain.tld", referrer: "https://plesk.domain.tld/smb/web/edit"

    Read the article

  • Why is a small fixed vocabulary seen as an advantage to RESTful services?

    - by Matt Esch
    So, a RESTful service has a fixed set of verbs in its vocabulary. A RESTful web service takes these from the HTTP methods. There are some supposed advantages to defining a fixed vocabulary, but I don't really grasp the point. Maybe someone can explain it. Why is a fixed vocabulary as outlined by REST better than dynamically defining a vocabulary for each state? For example, object oriented programming is a popular paradigm. RPC is described to define fixed interfaces, but I don't know why people assume that RPC is limited by these contraints. We could dynamically specify the interface just as a RESTful service dynamically describes its content structure. REST is supposed to be advantageous in that it can grow without extending the vocabulary. RESTful services grow dynamically by adding more resources. What's so wrong about extending a service by dynamically specifying a per-object vocabulary? Why don't we just use the methods that are defined on our objects as the vocabulary and have our services describe to the client what these methods are and whether or not they have side effects? Essentially I get the feeling that the description of a server side resource structure is equivalent to the definition of a vocabulary, but we are then forced to use the limited vocabulary in which to interact with these resources. Does a fixed vocabulary really decouple the concerns of the client from the concerns of the server? I surely have to be concerned with some configuration of the server, this is normally resource location in RESTful services. To complain at the use of a dynamic vocabulary seems unfair because we have to dynamically reason how to understand this configuration in some way anyway. A RESTful service describes the transitions you are able to make by identifying object structure through hypermedia. I just don't understand what makes a fixed vocabulary any better than any self-describing dynamic vocabulary, which could easily work very well in an RPC-like service. Is this just a poor reasoning for the limiting vocabulary of the HTTP protocol?

    Read the article

  • The Fantastic New WebLogic on Oracle Database Appliance 2.9 Release is Here!

    - by JuergenKress
    Last week was a big day in virtualised ODA-land as it saw the launch of WebLogic on ODA 2.9. Admittedly it doesn't sound like a very exciting release but it is one that we at O-box have been looking forward to for quite some time. Let me explain why, then we'll look into the details... The ODA X4-2 has 48 Intel Xeon cores. That is a lot of compute power. Whilst the largest O-box SOA Appliance single environment configuration can in theory use all those cores (currently with 40 vCPU of SOA!) the vast majority of O-box users will want smaller configurations. Prior to 2.9 the Oracle WebLogic implementation only supported one domain per ODA, so the conundrum O-box development faced last year was either: offer customers only one SOA environment on their O-box for now (but have the benefit of a standard, easily supportable WebLogic installation), or build our own WebLogic/OTD OVM templates from scratch. One of our driving goals with O-box is to give the best possible experience and make the appliance as supportable as possible. Therefore we took the gamble that we would stick with the Oracle's one-domain WebLogic configuration initially, and just hope that it would deliver multi-domain support for us in a timely manner (note: this is probably not a strategy that business textbooks would recommend!). Anyway, we've been working closely with Oracle Product Management for a few months now and I'm delighted to see 2.9 as the fruits of their labour. This also neatly ties in with several recent requests for O-box to include OSB as well as SOA/BPEL (which we have always wanted to have in separate domains). The diagram below is the neatest way to summarise what the new 2.9 release will allow us to deliver, i.e. previously only one 3D box was possible: Read the complete article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: oBox,WebLogic on ODA,ODA,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • dell vostro 1000 broadcom wireless connection

    - by lorrenuy
    I have a problem with the hardware broadcom wifi. I press the hotkey fn+f2 to activate the hardware and this will not work. I'll look at the drivers but it appears to be installed. How can I solve this problem? Ubuntu is all new to me so if possible, give me a clear explanation. Now do I connect the lan cable. I use the Ubuntu 11.10 lawrence@lawrence-Vostro-1000:~$ sudo lshw -class network [sudo] password for lawrence: PCI (sysfs) *-network description: Network controller product: BCM4311 802.11b/g WLAN vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:c0200000-c0203fff *-network description: Ethernet interface product: BCM4401-B0 100Base-TX vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 logical name: eth1 version: 02 serial: 00:1c:23:a2:b9:a9 size: 100Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=192.168.1.18 latency=64 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:21 memory:c0300000-c0301fff lawrence@lawrence-Vostro-1000:~$ lawrence@lawrence-Vostro-1000:~$ rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

    Read the article

  • yum not able to install a package

    - by shadyabhi
    [root@mypc yum.repos.d]# yum search perl-Locale-gettext Loaded plugins: dellsysid, fastestmirror Repository tmz-puppet is listed more than once in the configuration Loading mirror speeds from cached hostfile * atomic: www6.atomicorp.com * base: mirror.trouble-free.net * epel: mirrors.tummy.com * extras: eq-centosrepo.hopto.org * rpmforge: mirror.hmc.edu * updates: mirror.team-cymru.org =================================================================== N/S Matched: perl-Locale-gettext ==================================================================== perl-Locale-gettext.x86_64 : Internationalization for Perl Name and summary matches only, use "search all" for everything. [root@mypc yum.repos.d] And [root@mypc yum.repos.d]# yum install perl-Locale-gettext Loaded plugins: dellsysid, fastestmirror Repository tmz-puppet is listed more than once in the configuration Loading mirror speeds from cached hostfile * atomic: mir01.syntis.net * base: mirrors.gigenet.com * epel: mirror.us.leaseweb.net * extras: centos.mirror.lstn.net * rpmforge: mirror.hmc.edu * updates: centos.mirror.choopa.net Setting up Install Process Nothing to do [root@mypc yum.repos.d]# What is going wrong here?

    Read the article

  • Removing RAID on a DELL power-edge server

    - by Simon Callan
    We have a Dell Power-edge T110 server, with either a PERC S100 or S300 raid controller (I suspect S100), and 2 x 500GB SATA hard discs. These discs are running in RAID-1 configuration, (either 1 or 2 virtual discs), and on top of this, we have the C and D drives. As we are running low on disc space, we are looking at dropping the RAID to get some disc space back. Is it possible to split the discs back into 2 seperate hards discs that the OS can see, without losing all the data on the drives? Even better, would it be possible to split the D: drive, leaving the OS C: drive in RAID1 configuration?

    Read the article

  • wifi not working hp dv4

    - by Blaze
    i get this output for sudo lshw -C network : *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 06 serial: 3c:4a:92:cd:63:98 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network DISABLED description: Wireless interface product: RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip] vendor: Ralink corp. physical id: 0 bus info: pci@0000:0a:00.0 logical name: wlan0 version: 00 serial: 90:00:4e:82:3c:5b width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.0.0-17-generic-pae firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c2500000-c250ffff i cant enable the wifi using the fn+f12 key.. its just stuck. In windows 7 it gets enabled when i press the same keys. but this happens after it gets booted up... i just want to use the wifi in anyway possible. can anybody help?

    Read the article

  • Outlook 2010 exchange setup prompts for [email protected] rather than [email protected]

    - by Force Flow
    We use a hosted exchange service. When users want to set up Outlook 2010 to access their account, they open Outlook and run through the configuration steps. Autodiscover is enabled, and in the user's active directory profile, their email address is in the email field. However, when the configuration process reaches a point where they are prompted for their email account's username and password, their active directory username is filled in by default instead of their email address. Is there a way to fix that? Users get confused and try to enter their email password over and over again and wonder why it doesn't work (and completely miss/ignore the "use another account" button even though they have instructions right in front of them). I'm also using the Office 2010 ADM's in group policy, but I haven't yet seen an option to specify what gets auto-populated in that windows security prompt.

    Read the article

  • Bacula Director and Storage in LAN

    - by B14D3
    I have two networks LAN and DMZ.. Machines in DMZ are accesible from internet ( only over http). In LAN I have servers that see all LAN and all DMZ machines but machinse from DMZ don't see any LAN servers. Machines in LAN have access only to all LAN and DMZ, no direct access to internet and no access from internet. DMZ <------ LAN DMZ ----X--->LAN I'm planning to configure Bacula as major backup system. My plan is to install Bacula Director and Storage deamon on the same server in LAN for safety reasons. So my question is: Will this configuration work, is it posible for bacula director and storage deamon installed on server in LAN to makes backup servers that are in my DMZ? Or in this network configuration Bacula should be in DMZ? (If yes will I can backup with it servers in LAN ?)

    Read the article

  • CentOS - dual boot from new partition

    - by Dima
    I need to install two copies of the CentOS 5.5 (bank A and bank B) on different partitions of the same hard disk and install grub boot loader to another partition (visible from both banks). The boot loader should redirect the boot menu to bank A or bank B (according to the configuration). The new partition is mounted to /common_partition and grub is installed on it using following command: grub-install /dev/hda In the new partition I'm created the following menu.lst file: title BOOTCONTROL REDIRECT : PLEASE WAIT root (hd0,1) configfile /boot/menu.lst boot On my setup: both partitions (bank A and bank B) are primary and grub is installed on MBR. The problem is: but the new boot loader (on common_partition) did not load. What wrong on my configuration?

    Read the article

  • Exchange 2010 Deployment Notes - ISA 2004 Server Issue

    - by BWCA
    An interesting ISA 2004 tidbit … While we were setting up our Exchange 2010 ActiveSync environment, we encountered a problem where we could not successfully telnet over port 443 from one of our ISA 2004 Servers to our Exchange 2010 Client Access Server Array. When we tried to telnet over port 443 from the ISA Server to the Client Access Server Array name, we would get a “Could not open connection to the host on port 443: Connect failed” error message. Also, when we used portqry over port 443 from the ISA Server to the Client Access Server Array name, we would get a “Error opening socket: 10065” and “No route to host” error messages. It was odd because we did not have any problems with using ping or tracert from the ISA Server to the Client Access Server Array and our firewall firewall policy was allowing 443 traffic to pass through. After some troubleshooting, we were able to telnet and use portqry over port 443 successfully if we stopped the Microsoft Firewall service on the ISA 2004 Server.  So, it was strictly a problem with ISA.  Eventually, we were able to isolate the problem to a ISA 2004 Server System Policy setting as shown below (to modify the System Policy, right-click Firewall Policy and click Edit System Policy). Under the Diagnostics Services – HTTP Connectivity verifiers Configuration Group, you need to enable the configuration group under the General tab to resolve the problem.  After we enabled the setting, we no longer had a problem.

    Read the article

  • Can't start webcam for google video services

    - by wisemonkey
    I've got Ubuntu 11.10 64 bit and have installed the google video chat plugin. However webcam doesn't seem to work (black screen -- no video at all). For cheese it works but shows really bad (black and white kinda) image. Following some link I installed guvcview if I start it then image looks neat. Any suggestions on how can it be fixed? If it helps I've tried the solution: $ sudo mv /opt/google/talkplugin/GoogleTalkPlugin /opt/google/talkplugin/GoogleTalkPlugin.old $ sudo gedit /opt/google/talkplugin/GoogleTalkPlugin and putting following lines in: #!/bin/sh LD_PRELOAD=/usr/lib32/libv4l/v4l1compat.so /opt/google/talkplugin/GoogleTalkPlugin.old OR #!/bin/sh LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l1compat.so /opt/google/talkplugin/GoogleTalkPlugin.old Cause I've both files. Finally $sudo chmod +x /opt/google/talkplugin/GoogleTalkPlugin.old I closed and reopened chrome then started gmail tried video call -- black screen :-/ Ok so today finally google+ provided me with trouble shoot link and advised me: The plug-in won't install If you're having trouble installing the plug-in, or are receiving a message asking you to reinstall it, you should check to make sure your configuration is right. To do so simply: Check to make sure the Google Talk Plugin Video Accelerator and Google Talk NPAPI Plugin are enabled. If you're using Chrome you can type about:plugins in your browser to display your plug-ins. Make sure you're not using Internet Explorer 64-bit (this is a browser version that is 64 bit as opposed to 32 bit). Ensure that you don't have any "click to run" extensions enabled. If you're still experiencing this issue after checking your configuration you can follow these steps: Refresh the browser page. Close any running Google Talk plug-in processes. Close all open and running browser processes. Restart your computer. Uninstall and then reinstall the plug-in. Try a different browser such as Google Chrome or Mozilla Firefox. I looked in about:plugins for chrome and firefox: I don't have Google Talk NPAPI Plugin, does that matter? and I thought its installed with google talk plugin or no?

    Read the article

  • configuring USB modem( Huawei EC156) in ubuntu 13.10

    - by user205427
    I am facing difficulty in installing my USB modem in Ubuntu 13.10. Contrary to what many have suggested,it does not get detected automatically, nor does setting a new connection help. USB Device is listed in lsusb, but not under network manager or Devices, it is detected as a CD-ROM, what I understood from the web was that usb-modeswitch can be used to switch it to a USB device. Even 'Enable Mobile Broadband' option is not shown in network manager. What was interesting is when I start laptop with windows 7 and use the USB modem and after that restart with Ubuntu, both Enable Broadband and the mobile broadband connection can be seen. Sadly, internet connection could not be installed. I tried using USB-modeswitch command as suggested somewhere, but it does not seem to work. Following is the message. Take all parameters from the command line * usb_modeswitch: handle USB devices with multiple modes * Version 2.0.1 (C) Josua Dietze 2013 * Based on libusb1/libusbx ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1505 HuaweiMode=1 NeedResponse=0 InquireDevice enabled (default) Look for default devices ... found USB ID 8087:0020 found USB ID 1d6b:0002 found USB ID 0461:4db6 found USB ID 12d1:1505 vendor ID matched product ID matched found USB ID 138a:0007 found USB ID 03f0:231d found USB ID 8087:0020 found USB ID 1d6b:0002 Found devices in default mode (1) Access device 005 on bus 001 Get the current device configuration ... OK, got current device configuration (1) Use interface number 0 Use endpoints 0x08 (out) and 0x87 (in) Inquire device details; driver will be detached ... Looking for active driver ... OK, driver detached INQUIRY message failed (error -9) USB description data (for identification) ------------------------- Manufacturer: HUA?WEI TECHNOLOGIES Product: HUAWEI Mobile Serial No.: ??????????????????? ------------------------- Send old Huawei control message ... -> Run lsusb to note any changes. Bye! I am stuck with this problem for 4 days now, any help would be appreciated

    Read the article

  • Option and command keys in OSX are swapped and keyboard preferences do not set them back.

    - by bikesandcode
    On my MacBook pro, I occasionally use external keyboards, generally Windows ones and things have been fine. Yesterday, I plugged in a new one, remapped the command/option keys so the windows/alt keys were in the same configuration, again, nothing new here. However, this time when I unplugged the USB keyboard, the laptops option/command keys remained switched. More annoying is that if I go into the System Preferences - Keyboards - Modifier keys, remapping the keys to actions does not work. I can use the drop downs to disable any specific keys, but switching the behaviours does nothing. (Cmd/Option obvious, tried remapping anything to caps lock and a few other combinations, no joy. Restore defaults set the configuration to what I'd expect, but the settings are evidently ignored.) So: Any ideas?

    Read the article

  • Tweaking log4net Settings Programmatically

    - by PSteele
    A few months ago, I had to dynamically add a log4net appender at runtime.  Now I find myself in another log4net situation.  I need to modify the configuration of my appenders at runtime. My client requires all files generated by our applications to be saved to a specific location.  This location is determined at runtime.  Therefore, I want my FileAppenders to log their data to this specific location – but I won't know the location until runtime so I can't add it to the XML configuration file I'm using. No problem.  Bing is my new friend and returned a couple of hits.  I made a few tweaks to their LINQ queries and created a generic extension method for ILoggerRepository (just a hunch that I might want this functionality somewhere else in the future – sorry YAGNI fans): public static void ModifyAppenders<T>(this ILoggerRepository repository, Action<T> modify) where T:log4net.Appender.AppenderSkeleton { var appenders = from appender in log4net.LogManager.GetRepository().GetAppenders() where appender is T select appender as T;   foreach (var appender in appenders) { modify(appender); appender.ActivateOptions(); } } Now I can easily add the proper directory prefix to all of my FileAppenders at runtime: log4net.LogManager.GetRepository().ModifyAppenders<FileAppender>(a => { a.File = Path.Combine(settings.ConfigDirectory, Path.GetFileName(a.File)); }); Thanks beefycode and Wil Peck. Technorati Tags: .NET,log4net,LINQ

    Read the article

  • how to connect with ssh when it's hanging

    - by Eduardo Bezerra
    I'm trying to ssh into a remote machine, but it hangs when looking for an identity file: [username@local .ssh]$ ssh -v remote uname OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010 debug1: Reading configuration data /home/username/.ssh/config debug1: Applying options for * debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to remote [192.168.3.36] port 22. debug1: Connection established. debug1: identity file /home/username/.ssh/identity type -1 debug1: identity file /home/username/.ssh/id_rsa type -1 debug1: identity file /home/username/.ssh/id_dsa type -1 I can ping the machine normally, and it's obviously working with the sshd service running... I just don't know how to log into it. In fact, I'd just like to reboot it. That'd be fine. Thing is: it's across the ocean (I'm in the US, and the machine is in Europe). I'd run some hundreds of java threads at the same time and apparently that was too much for the host. How can I get back in?

    Read the article

  • Avoiding double NAT with PPPoA connection

    - by user498429
    I've got an ASUS RT-N56U wending its way to me and have been thinking about how to set this up on my home network. I currently have a Netgear DG634g V5 and was hoping to use this device as a modem only, with everything else being done by the router. Problem is, my ISP uses PPPoA and the asus seems only to support PPPoE. I'm aware that a double NAT configuration should be avoided and I've seen some instructions here: http://www.tomshardware.co.uk/forum/33700-17-ultimate-modem-router-setup-thread Specifically, I was going to follow the guidance in the section entitled "Chaining Two Networks Together In a Cascading Fashion (Modem handles PPPoA)". That seems like it could work. However, is this a double NAT configuration or even a good way to do it? Would UPnP still work? The other option, I understand, is to buy the Draytek Vigor 120 but I'd ideally like to avoid the cost of that if its not necessary.

    Read the article

  • Problem with APTonCD application

    - by Harikrishnan
    I created a iso image using aptoncd & burned it to a dvd. Now when i tried to restore, the program does not detect the dvd in the drive. It shows "Please insert a disc in the drive." and if we click "ok" it shows E: Failed to mount the cdrom. The dvd is in the drive itself. I tried sudo lshw -C disk and the output is: *-cdrom description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 logical name: /media/APTonCD logical name: /media/apt version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 mount.fstype=iso9660 mount.options=ro,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 state=mounted status=ready *-medium physical id: 0 logical name: /dev/cdrom logical name: /media/APTonCD logical name: /media/apt configuration: mount.fstype=iso9660 mount.options=ro,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 state=mounted Then i checked in disk utility application. in that dvd rom is shown as /dvd/sr0 My ubuntu version is 10.10. Please help me to solve the problem.

    Read the article

  • Nginx Restart Issues

    - by heavymark
    All of the sudden when restarting Nginx I get the following error: Restarting nginx: [alert]: could not open error log file: open() "/var/log/nginx/error.log" failed (13: Permission denied) 2011/02/16 17:20:58 [warn] 23925#0: the "user" directive makes sense only if the master process runs with super-user privileges, ignored in /etc/nginx/nginx.conf:1 the configuration file /etc/nginx/nginx.conf syntax is ok 2011/02/16 17:20:58 [emerg] 23925#0: open() "/var/run/nginx.pid" failed (13: Permission denied) configuration file /etc/nginx/nginx.conf test failed On the front end part of the site loads but some files such as the CSS in particular are not loading. They exist on the server but when loading the resources directly in Chrome they say "Oops this page can't be found." I set a special group and user to run my apache files using suexec for my domain files. I think the nginx are owned by root however which I'm assuming is the problem but which nginx file ownerships would I change?

    Read the article

  • Problem with Xen, xvda and sda

    - by Javier J. Salmeron Garcia
    I am creating a cloud for my university using Eucalyptus with Xen (PCs have Debian Squeeze 64 bit installed). I have a problem with the following guest configuration: # # Configuration file for the Xen instance evenmorefinalfoo, created # by xen-tools 4.2 on Thu May 26 11:03:06 2011. # # # Kernel + memory size # kernel = '/boot/vmlinuz-2.6.32-5-xen-amd64' ramdisk = '/boot/initrd.img-2.6.32-5-xen-amd64' vcpus = '1' memory = '128' # # Disk device(s). # root = '/dev/sda2 ro' disk = [ 'file:/home/xen/domains/evenmorefinalfoo/disk.img,sda2,w', 'file:/home/xen/domains/evenmorefinalfoo/swap.img,sda1,w', ] As you can see, the disk and swap images are meant to be mounted on sda1 and sda2. However, when I start the guest, these are mounted on xvda1 xvda2, provoking an error. Is there anything that I can do about that? It seems like it is a Xen error. Thank you in advance,

    Read the article

< Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >