Search Results

Search found 38674 results on 1547 pages for 'ms access 2013'.

Page 178/1547 | < Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >

• Unable to SSH into ESXi 4.1 host - "Access Denied"

  - by Andrew White

  I am unable to SSH into an existing ESXi server. I have a user which is in the "root" and "users" group and is able to connect via vSphere. However after enabling "Remote support (SSH)", attempting to connect by putty and entering my username/password when prompted I am presented with an "Access Denied" message. I have run through the options presented at this KB article to no avail. I have taken down the firewall on the machine (it is remote) temporarily to check if this helped - no change. The username/password are definitely correct and I can obviously get connectivity if I am presented with the username/password prompt. I am at a bit of a loss what else I can try. Thanks all

  Read the article

• Boot Linux from DOS (with loadlin.exe etc)

  - by dreamlax

  I have been using the latest version of loadlin.exe (version 1.6e). It works on some machines but on others I get "no place after kernel for initrd". The kernel is about 5MB in size (non-modular) and my initrd image (decompressed) is about 8MB. One route that I could take is to enable module support and offload some of the weight of the kernel into the initrd image but I'm not confident this will rectify the issue. Are there any alternatives to loadlin.exe that are capable of loading Linux from a booted DOS session? I basically have a series of DOS tools that I'd like to run one after another and then boot into Linux, which loadlin.exe seems to be working very well for except on some machines.

  Read the article

• Access MacZFS via network from XBMC

  - by AreusAstarte

  I have a ZFS RAID (zpool with three drives) hooked up to my Mac that I want to share in my LAN so that the XBMC client on my OUYA console hooked up to the television can read the drive and use it to stream my movies and television shows onto the television set. I've searched around for a bit but so far haven't found anything that helped me with it. I know that when connecting to the Mac with SSH I can't just access the drive due to different formatting. What do I have to do so that XBMC will be able to read it? How do I share it?

  Read the article

• Need to access Mac via ssh remotely through another Mac with Internet Sharing

  - by Ze'ev

  My setup at office is: Internet - AirportExtreme --(wifi)-- AirportExpress --(eth)-- MacPro1 --(eth)-- MacPro2 I want to be able to access MacPro2 from laptop at home via ssh (and sftp). Is it possible? The AirportExtreme is set to "DHCP and NAT" and is doling out 10.0.1.xxx IPs. The AirportExpress is 10.0.1.2. MacPro1 is 10.0.1.3 via Ethernet to AirportExpress. It is then connected by 2nd Ethernet port (192.168.2.1) to MacPro2, which is 192.168.2.2. Is there any way to "tunnel through" to MacPro2 from home? Thanks!

  Read the article

• Server 2008 R2 file access permissions

  - by Napster100

  I'm finding it awkward to sort out permissions for file sharing and access on my LAN. I've created an account on the server node (as a normal user) and shared a drive that has 2 folders at the root, one is for personal file storage and the other shared files, if I connect to the shared area from a workstation running windows 7 and log-in using the account I created on the server, I can look through directories but can't look in some (which I wanted as I changed the permissions for that to happen), but my problem is although the permissions are set for this user account to have full control of the specific folder I can't create a folder in that area or upload files to that folder. Could someone explain why this is? Thanks in advanced

  Read the article

• Access Rails under /app/, not /app/public/

  - by blinry

  I'm trying to deploy Rails 2.1.2 with Apache 2.2.10 and FastCGI (yeah, bad, ancient, ugly, I know). My application can be accessed via example.com/app/public/, but I want to access it via example.com/app/. In my .htaccess-File (in the app/-directory!) I have: RewriteEngine On RewriteBase /app/ RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ public/dispatch.fcgi [QSA,L] How can I forward each request going to app/ to app/public/? Every time I try this (like, with RewriteRule ^.*$ public/$1 [QSA]) I get a routing error: No route matches "/app/" with {:method=>:get} Help?

  Read the article

• Allow Internet Access with Default Gateway on Windows 7 VPN Server

  - by Hakoda

  I have a Windows 7 box at home (which I'll refer to as Home-VPN) that runs a simple PPTP VPN server. I have a range of 2 IP address (192.168.1.10-192.168.1.11) to give out, although the server is only able to give out one concurrent connection. Ports 1723 & 47 are correctly forwarded to the server. IPv6 is disabled on both Home-VPN and the client. I setup Home-VPN just like this Youtube video: http://www.youtube.com/watch?v=1s5JxMG06L4 I can connect to it just fine but I can't access the Internet when connected to Home-VPN, all outside web servers (eg. google.com, mozilla.org, apple.com) are unreachable. I know I can uncheck "Use Default Gateway on Remote Servers" on the client side under IPv4 settings but that will route all my traffic through my current connection, rather than through the VPN, defeating the purpose of said VPN. Any ideas on how I can fix this?

  Read the article

• Postgres Remote Access

  - by boot-baby-boot

  I am trying to connect to postgres remotely.I have followed this tutorial http://www.cyberciti.biz/faq/howto-fedora-linux-install-postgresql-server/ and have executed the following commands to see if the remote access is possible. [root@printmyworld ~]# egrep -i "(listen_addresses|port|tcpip_socket).*=.+" /var /lib/pgsql/data/postgresql.conf #listen_addresses = '*' # what IP address(es) to listen on; #port = 5432 [root@printmyworld ~]# lsof +c0 -anPiTCP -upostgres COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME postmaster 9323 postgres 3u IPv4 2875987353 TCP 127.0.0.1:5432 (LISTEN ) postmaster 9323 postgres 4u IPv6 2875987354 TCP [::1]:5432 (LISTEN) I am suspicious of this line: postmaster 9323 postgres 3u IPv4 2875987353 TCP 127.0.0.1:5432 (LISTEN My server ip address is 1yy.000.1xx.000 .Should it be 1yy.000.1xx.000:5432

  Read the article

• Store system passwords with easy and secure access

  - by CodeShining

  I'm having to handle several VPS/services and I always set passwords to be different and random. What kind of storage do you suggest to keep these passwords safe and let me access them easily? These passwords are used for services like databases, webserver user and so on that run customers' services, so it's really important to keep them in a safe place and strong. I'm actually storing them in a google drive spreadsheet file, describing user, password, role, service. Do you know of better solutions? I'd like to keep them on a remote service to make sure I don't have to make backup copies (in case my hdd would fail somehow). I do work on *nix platforms (so windows specific solutions are not a choice here).

  Read the article

• What is the best way to migrate to a new file share in a new domain?

  - by cbattlegear

  I am looking to move a file share (100 GB or so) from one domain/server to a new domain and server. I would like to do this with little to no downtime and if possible I would like to be able to map permissions from the groups/users in the current system to groups/users in the new domain. A side question, a large number of the files in the system are office documents with hard links to the old file server. Any way to programmatically change all those links to the new file server?

  Read the article

• Idempotent Powershell word search/replace across documents with headers, change tracking, etc.

  - by user61633

  I've found one or two guides to doing a word search and replace across multiple documents with powershell. They work well on simple documents. However, the script ignores text in headers and footers; and if "track changes" is enabled, it replaces text which has already been replaced, resulting in multiple copies of the new text if I run the script more than once on the same file. Any clues as to how I can avoid these undesirable behaviors and make this script robust?

  Read the article

• Cannot access internal network on OSX 10.6.6

  - by cabuki

  Last week, I began having trouble connecting to our internal web servers. Usually, a refresh would take care of it or switching to a different wireless network, but as of yesterday, this wasn't enough. We have an internal DNS server using dnsmasq and a private internal host name (us.lcl). Once I started having more issues with the names not resolving, I tried pinging the server. Using the internal host name (s1.us.lcl), it failed. I tried using the IP address, but that also failed. I have no problems accessing external sites with the exception of it being a bit slower than normal. A reboot yesterday at lunch time after following the instructions here seemed to fix the issue, but when I came into the office this morning, it had stopped working. As of this posting, I cannot ping, ssh or access the web server using the internal host name or ip address. I'm the only one running 10.6 in my office and none of my colleagues has this issue.

  Read the article

• Allow access only to one website

  - by Alex

  Hey. I'd like to allow access on a computer connected directly to the internet to one website ONLY. The solution of IE's "Content advisor" or firefox's "FoxFilter" isn't good enough because it actually downloads the data and just don't display it. I want to block the traffic before the requests are sent. How is it possible? Thanks. Edit: OS is windows xp. The browser can be firefox, iexplorer, chrome... It doesn't matter. The computer is connected directly to the modem.

  Read the article

• Can an entire mailbox of deleted items be recovered in Office 365?

  - by Windows Ninja

  Recently an employee deleted their entire mailbox before leaving the company and there was no litigation hold in place. Is there any way to recover all of the deleted items, preferably via a PowerShell script? We'd need to recover all of the folders, subfolders, and online archives. I realize we can recover emails one by one up to a point but this will take far too long to be feasible. Thanks in advance!

  Read the article

• Server 2008 Hyper-V User Accounts to access each other

  - by asn1981

  Hi, I have a windows server 2008 r2 with 3 hyper-v vm's IIS server Sql server 3 - Mail server I'm new to networking/server configuration. I have created a Virtual Network and can see each of the 3 VMs as well as the host on the network. I can connect from each VM to the host using the admin account. However, what would be the best (secure) way to create connections/accounts between the VMs, presumabely this shouldn't be done with an admin account but one with lesser priveledges. For example, to be able to access the SQL Server VM from the IIS server VM?

  Read the article

• "Access is denied" when copying text file to printer UNC path

  - by Patrick

  We have a new server running Server 2008 R2. We also have a "DOS-based" program that prints directly to the UNC path of a print share. With the new server, we are unable to print from this program. According to support, the program's printing works in the same way as if we were to do a "copy mytextfile.txt \\myserver\myprinter". When we try to run this command in DOS, we get "Access is denied". Support is saying that this is why the DOS program is not able to print. I have tried granting all permissions on the printer to the appropriate users (under Security of the printer properties) but that did not work. Is there a policy setting that would cause this to be denied?

  Read the article

• FreeNAS plugins not able to access storage

  - by dave

  I've just setup a FreeNAS box and have a couple plugins (sick beard and SABnzbd) installed. Both of these have you select a directory where downloads should go. My storage is on /mnt/MediaVolume/ however when I navigate to mnt it's an empty directory. When I SSH to the box though, I can see it just fine. I'm thinking it may have something to do with permissions, but I'm not sure. Any suggestions how to allow these plugins to view/have access? Thank you!

  Read the article

• Remote access over VPN machine

  - by w_harry

  Here is my scenario. I have Comp1 which has VPN installed on it & working fine. I have made Comp1 as remote enabled as well. Now i want to log in to Comp1 ( remotely) from Comp2. Without starting the VPN, remote desktop works fine from Comp2 to Comp1. When i connect to VPN on Comp1 the remote desktop from Comp2 breaks. Is there a way i can run VPN on Comp1 and be able to access from Comp2 remotely. If there is change in settings, please advice. Regards

  Read the article

• Cannot Access Server from External IP (Router)

  - by mindoftea

  We have an Ubuntu 10.04 LAMP server running on site (Apache is on port 80). It is running fine through the LAN, but I cannot access it using its external IP address through the Netopia 3000 Series modem by which it is connected to the internet. I have tried using what Netopia calls "Pinholes" (Port Forwarding) to make the server accessible, but a telnet to the external address just gives me "connect to address x.x.x.x: Operation timed out." I have also tried enabling "Services" and "IP Passthrough" on the router, but it gives the same result as above. How can I enable the server to be accessed through its external IP address? Because it connects fine locally, it would seem to be a problem with the Netopia router. Update: Booting the server in GUI mode instead of text mode solved the problem instantly. Any ideas why?

  Read the article

• ID Badge Access System for Building with Active Directory Integration [closed]

  - by Alex

  I hope this is the right place for this question. So, we're looking into setting up a building access that uses badges or cards of some kind. I wanted to ask the users on here if they've had to do such setups and/or if they have recommendations? Is there maybe a system that integrates with Active Directory? I know one of the things our managers want to do is to be able to run reports on when people are entering the buildings. I'd appreciate any suggestions and thanks in advance!

  Read the article

• Can't access unprotected .pst file in Outlook 2010

  - by KGraves

  My father has a Windows 7 x64 system with 32-bit Outlook 2010. He asked me to access his archived mail to get to some old mail. When going to open the file I'm asked for a password (he never applied one) and I get a message saying "password is incorrect. Re-Type password". Since he told me that he never set a password I tried opening the .pst with Nucleus, a tool that allows me to view the .pst's. Does anyone know what the deal is? With the free version of Nucleus we can't view the attachments.

  Read the article

• iPhone can't access webserver on lan

  - by dieselJoe

  I have Apache serving on 192.168.1.4:8888 on a Windows 7 computer. I can't view the website with iPhone/iPad's Safari. I have another linux computer and it can access the webserver or ping the address. Is there a problem with the apple devices? I have an app on the iphone capable of pinging. I ping the webserver's address and I get nothing. But I can ping the iPhone from the linux or windows computer.

  Read the article

• What are the reasons why outlook looses configurations?

  - by jnroche

  Can't seem to establish any logic why outlook suddenly looses its profile coniguration settings intermittently. I work for an IT Contact Centre but it hurts when someone asks me why they loose their outlook profiles suddenly, and some most of the time. I know there are lots of reasons but I'm not sure which ones are the best. Could it be that the PC in a hurge corporate organization will not be connected to the network properly so the profile gets corrupted for outlook? But they don't usually shut down the PC after office hours due to the fact that its a 24 hours operations. On top of that, when users are migrated to Windows 7 / Office 2010 and then logs on to this pc, then opens outlook, then logs off then goes back to a Windows XP PC and opens outlook 2003 the profile is again lost. Again why is this? Is there anyone out there whose facing same connection/outlook profile issues getting lost for no apparent reason?

  Read the article

• Unable to access MySQL from MyPHPAdmin after setting root password in EasyPHP{WAMP}

  - by Codex

  Am a new starter with WAMP and trying to play around my way using the EasyPHP setup. After successful setup on intial launch of MySQL, the page prompted me to set up ROOT password for security reasons. On setting the password, am no longer able to access MySQL. The error is : Error MySQL said: Documentation 1045 - Access denied for user 'root'@'localhost' (using password: NO) Looked up on the net and tried the following options in the config.inc.php from the phpmyadmin foler: 1] Set the authetication to "http" so that it prompts to enter the username and password /* Authentication type */ $cfg['Servers'][$i]['auth_type'] = 'http'; 2] Set up the correct password in the config file $cfg['Servers'][$i]['password'] = 'myPwd'; None of them worked. Can anyone suggest a workaround to access MySQL? Am not fussed about not being able to use the root account but would like to CRUD on the database using other username. Thanks in advance.

  Read the article

• Cannot access MOSS site from within MOSS server

  - by strongopinions

  I am trying to access my MOSS site through the browser on the web server itself. I am using the same URL that is used for external access to the site. When I hit it from outside the server, I can see most of the site, which has anonymous access, and can use a domain account to get into secure areas. When I hit it from within the server, I get prompted for a password, but no matter what I enter it seems to reject it and just presents another password dialog. Has anyone seen anything like this?

  Read the article

< Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >